Cr(VI) adsorption on the blends of Henna with chitosan microparticles: Experimental and statistical analysis

Efficient removal of chromate from wastewater using a one-pot synthesis of chitosan cross-linked ceria incorporated hydrous copper oxide bio-polymeric composite

Remediating hexavalent chromium [Cr(VI)] from contaminated water systems is a significant concern due to its harmful effects on human health, aquatic life, and plants. To tackle this issue, scientists have created a chitosan cross-linked hydrous ceria incorporated cupric oxide bio-polymeric composite (CHCCO) by combining chitosan biopolymer with corresponding metal ions using glutaraldehyde as a cross-linker. The composite was characterized using advanced analytical instruments such as FTIR, p-XRD, SEM, XPS, etc. The synthesized composite (CHCCO) was then tested for its efficiency in removing Cr(VI) from synthetic Cr(VI) aqueous samples. The parameters examined included pH, material dose, contact time, concentration, temperature, and co-existing ions. The experimental data showed that the kinetics and equilibrium data fit well with the pseudo-second-order and the Freundlich isotherm models, respectively. Thermodynamic analysis demonstrated that the investigated surface adsorption process is spontaneous and endothermic. Except for the SO42- ion, no other species imparts adverse influence significantly on the reaction. The CHCCO bio-composite surfaces were refreshed using a dilute NaOH (1.0 M) solution and effectively recycled five times for Cr(VI) adsorption, indicating no significant surface activity deterioration. This study highlights the high effectiveness of CHCCO bio-polymeric composites in Cr(VI) remediation and the potential for this technology as an easy-to-use technique for environmental restoration.

Unconventional water resources: Global opportunities and challenges

Water is of central importance for reaching the Sustainable Development Goals (SDGs) of the United Nations. With predictions of dire global water scarcity, attention is turning to resources that are considered to be unconventional, and hence called Unconventional Water Resources (UWRs). These are considered as supplementary water resources that need specialized processes to be used as water supply. The literature encompasses a vast number of studies on various UWRs and their usefulness in certain environmental and/or socio-economic contexts. However, a recent, all-encompassing article that brings the collective knowledge on UWRs together is missing. Considering the increasing importance of UWRs in the global push for water security, the current study intends to offer a nuanced understanding of the existing research on UWRs by summarizing the key concepts in the literature. The number of articles published on UWRs have increased significantly over time, particularly in the past ten years. And while most publications were authored from researchers based in the USA or China, other countries such as India, Iran, Australia, and Spain have also featured prominently. Here, twelve general types of UWRs were used to assess their global distribution, showing that climatic conditions are the main driver for the application of certain UWRs. For example, the use of iceberg water obviously necessitates access to icebergs, which are taken largely from arctic regions. Overall, the literature review demonstrated that, even though UWRs provide promising possibilities for overcoming water scarcity, current knowledge is patchy and points towards UWRs being, for the most part, limited in scope and applicability due to geographic, climatic, economic, and political constraints. Future studies focusing on improved documentation and demonstration of the quantitative and socio-economic potential of various UWRs could help in strengthening the case for some, if not all, UWRs as avenues for the sustainable provision of water.

Application of Fish Collagen-Nanochitosan-Henna Extract Composites for the Control of Skin Pathogens and Accelerating Wound Healing

Skin is the largest protective organ that could be recurrently wounded and attacked by microorganisms. The wounded skin safeguarding and supporting were intended through natural derivatives. Fish collagen (Cg) type I, extracted from sea bream (Spondyliosoma cantharus), chitosan nanoparticles (NCht) from shrimp shells, and henna (Lawsonia inermis L.) leaves extract (He) were produced and physiochemically characterized. The antimicrobial potentialities of these compounds and their composites were assessed toward skin pathogens (Candida albicans and Staphylococcus aureus) using various assaying methods and microimaging techniques. The infrared and electrophoretic analysis of Cg validated its characteristics, and the IR-spectroscopic analysis of the compounds/composites indicated their physiochemical attributes and interrelations. The produced NCht particles had a diameter range of 64.6-308.8 nm, 104 nm mean diameter, and +31.3 mV zeta potentiality. Both NCht, He, and NCht/He composite exhibited significant antimicrobial potentiality toward skin pathogens; NCht/He was the strongest with inhibitory concentrations of 20.0 and 22.5 μg/mL and inhibition zones of 25.7 and 26.8 mm against S. aureus and C. albicans, respectively. The electron micrographs verified the synergistic microbicidal action of NCht/He, as they led to severe microbial lysis and deformations. The skin wounds’ treatment with NCht/He/Cg composite promoted the fastest and complete healing of wounded rats’ skin during 8 days of local treatment, with the absence of inflammation and infection signs; treated with NCht/He/Cg composite, the wound area vastly reduced from 63.6 mm2 to 15.9 and 9.1 mm2 after 2 and 4 days, respectively. The natural NCht/He/Cg composites are recommended as topical applications for optimum skin disinfection and regeneration.

Biochar stimulates growth of novel species capable of direct interspecies electron transfer in anaerobic digestion via ethanol-type fermentation

The study presented here was to evaluate the effects of combining biological ethanol-type fermentation pretreatment (BEFP) with biochar on the growth of novel species capable of direct interspecies electron transfer (DIET) and methanogenesis in anaerobic co-digestion (AcoD) of kitchen wastes (KWs) and waste activated sludge (WAS). The results showed that, after BEFP, the genera capable of extracellular electron transfer to Fe(III) oxides or the elemental sulfur, such as Geobacter, Sphaerochaeta and Sporanaerobacter species, were detected, which however were not detected in the seed sludge. In the presence of biochar, their abundance was further increased, suggesting that biochar stimulated their growth. With biochar, methane production rate increased by about 44% and the effluent concentration of total organic substrates further declined, compared with that without biochar. With biochar, methane production efficiency reached 241.6 mL/g-COD, more than 30% higher than that without biochar (185.0 mL/g-COD), suggesting that more energy from the oxidation of organic substrates was converted into methane. Analysis of Fourier transform infrared spectroscopy (FT-IR) and three-dimensional excitation emission matrix (3D-EEM) showed that decomposition of complex organic compounds in KWs and WAS was enhanced, since the novel species might proceed DIET with methanogens and participate in the metabolism of complex organic compounds.

Removal of Cr(VI) from Aqueous Solution by Polypyrrole/Hollow Mesoporous Silica Particles

The removal of Cr(VI) in wastewater plays an important role in human health and environment. In this work, polypyrrole/hollow mesoporous silica particle (PPy/HMSNs) adsorbents have been newly synthesized by in-situ polymerization, which prevent the aggregation of pyrrole in the process of polymerization and exhibit highly selective and powerful adsorption ability for Cr(VI). The adsorption process was in good agreement with the quasi-second-order kinetic model and the Langmuir isotherm model. And the maximum adsorption capacity of Cr(VI) was 322 mg/g at 25 °C. Moreover, the removal rate of Cr(VI) by PPy/HMSNs was ~100% in a number of binary systems, such as Cl⁻/Cr(VI), NO₃⁻/Cr(VI), SO₄²⁻/Cr(VI), Zn²⁺/Cr(VI), Fe³⁺/Cr(VI), Sn⁴⁺/Cr(VI), and Cu²⁺/Cr(VI). Thus, the PPy/HMSNs adsorbents have great potential for the removal of Cr(VI) in wastewater.

Silica based inorganic–organic hybrid materials for the adsorptive removal of chromium

We employed polymer functionalized silica gel as an adsorbent for the removal of Cr(vi) from water. The chains of 2-aminoethyl methacrylate hydrochloride (AEMA·HCl) polymer were grown from the surface of silica gel via surface-initiated conventional radical polymerization and the resulting hybrid material exhibited high affinity for chromium(vi). To investigate the adsorption behavior of Cr(vi) on diverse polymer based hybrid materials, the removal capacity of (SG-AEMH) was compared with our previously reported branched polyamine functionalized mesoporous silica (MS-PEI). The adsorption capacities of polymer based materials were also compared with their respective monolayer based platforms comprising a 3-aminopropyltriethoxysilane (APTES) functionalized silica gel (SG-APTES) and mesoporous silica (MS-APTES). The polymer based systems showed excellent Cr(vi) adsorption efficiencies compared to monolayer counterparts. The structural characteristics and surface modification of these adsorbents were examined by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The experimental data were analyzed using the Langmuir and Freundlich models. Correlation coefficients were determined by analyzing each isotherm. The kinetic data of adsorption reactions were described by pseudo-first-order and pseudo-second-order equations. Thermodynamic parameters, i.e., change in the free energy (ΔG°), the enthalpy (ΔH°), and the entropy (ΔS°), were also evaluated. The synthesized hybrid materials exhibited a high adsorption capacity for chromium ions. Furthermore, they could be regenerated and recycled effectively.

We employed and compared polymer functionalized silica gel and mesoporous silica as adsorbents for the removal of Cr(vi) from water.