Physical properties and antioxidant activity of gelatin-sodium alginate edible films with tea polyphenols

The synergistic effect of polyphenols and polypeptides for plant-based bioplastic film - Enhanced UV resistance, antioxidant and antibacterial performance

The exceptional biodegradability and active biological functions of bio-based packaging materials have attracted increasing interest. In this study, a bioplastic film was developed by introducing simultaneously polyphenols (tea polyphenols, TPs) and peptides (nisin) into a soy protein isolate/sodium alginate (SPI/SA) based film-forming matrix. The research results revealed that the dynamic coordinated interaction between TPs and nisin enhanced mechanical properties, UV-resistance, and thermal stability of bioplastic films. Furthermore, the bioplastic film exhibited antibacterial activity and antioxidant properties. Significantly, biofilm growth of Staphylococcus aureus treated with TPs-5/Nisin-5 bioplastic film was inhibited by 91.12% compared to the blank group. The shelf life of beef with TPs-5/Nisin-5 bioplastic film was prolonged by 2 days because of the synergistic effect of TPs and nisin. Additionally, the bioplastic film biodegraded in the natural environment about 21 days. This environmentally friendly regeneration strategy and the integration of advantageous functions provided ideas for the development of active food packaging.

Fabrication and characterization of an alginate-based film incorporated with cinnamaldehyde for fruit preservation

Sodium alginate (SA) is widely used in the food, biomedical, and chemical industries due to its biocompatibility, biodegradability, and excellent film-forming properties. This article introduces a simple method for preparing uniform alginate-based packaging materials with exceptional properties for fruit preservation. The alginate was uniformly crosslinked by gradually releasing calcium ions triggered by the sustained hydrolysis of gluconolactone (GDL). A cinnamaldehyde (CA) emulsion, stabilized by xanthan without the use of traditional surfactants, was tightly incorporated into the alginate film to enhance its antimicrobial, antioxidant, and UV shielding properties. The alginate-based film effectively blocked ultraviolet rays in the range of 400-200 nm, while allowing for a visible light transmittance of up to 70 %. Additionally, it showed an increased water contact angle and decreased water vapor permeability. The alginate-based film was also employed in the preparation of coated paper through the commonly used coating process in the papermaking industry. The alginate-based material displayed excellent antioxidant properties and antimicrobial activity against Escherichia coli, Staphylococcus aureus and Botrytis cinerea, successfully extending the shelf life of strawberries to 7 days at room temperature. This low-cost and facile method has the potential to drive advancements in the food and biomedical fields by tightly incorporating active oil onto a wide range of biomacromolecule substrates.

Seaweed-based biopolymers for food packaging: A sustainable approach for a cleaner tomorrow

With the increasing environmental and health consequences of uncontrolled plastic use, the scientific community is progressively gravitating toward biodegradable and ecofriendly packaging alternatives. Seaweed polysaccharides have attracted attention recently because of their biodegradability, nontoxicity, antioxidant properties, and superior film-forming ability. However, it has some limitations for packaging applications, such as low tensile strength, water solubility, and only modest antimicrobial properties. The incorporation of biopolymers, nanoparticles, or organic active ingredients enhances these characteristics. This review encapsulates the contemporary research landscape pivoting around the role of seaweed polysaccharides in the development of bioplastics, active packaging solutions, edible films, and protective coatings. A meticulous collation of existing literature dissects the myriad food application avenues for these marine biopolymers, emphasizing their multifaceted physical, mechanical, thermal, and functional attributes, including antimicrobial and antioxidant. A key facet of this review spotlights environmental ramifications by focusing on their biodegradability, reinforcing their potential as a beacon of sustainable innovation. This article delves into the prevalent challenges that stymie large-scale adoption and commercialization of seaweed-centric packaging, offering a comprehensive perspective on this burgeoning domain.

Hydrogel encapsulation facilitates a low-concentration cryoprotectant for cryopreservation of mouse testicular tissue

Cryopreserved testicular tissue offers a promising method to restore fertility in male infertility patients. Current protocols rely on high concentrations of penetrating cryoprotectants (pCPAs), such as dimethyl sulfoxide (DMSO), which necessitating complex washing procedures and posing risks of toxicity. Hydrogel encapsulation presents a non-toxic alternative for cellular cryopreservation. This study investigates the effects of various types, concentrations, and thicknesses of hydrogel encapsulation on the cryopreservation of mouse testicular tissue. Testicular tissues loaded with varying concentrations of DMSO were encapsulated in alginate or gelatin-methacryloyl (GelMA) hydrogels. We evaluated hydrogels as potential CPAs to reduce pCPA concentrations and determine optimal combinations for cryopreservation. Post-cryopreservation, tissues were cultured using organ culture methods to assess spermatogenesis progression. Cryomicroscopy and differential scanning calorimetry (DSC) were used to examine ice crystal formation, melting enthalpy, and non-freezing water content in different hydrogels during cooling. Results indicate that 3 % alginate or 5 % GelMA hydrogel with thin encapsulation optimally preserves mouse testicular tissue. Using 20 % DMSO in 5 % GelMA thin encapsulation showed comparable apoptosis rates, improved morphology, higher mitochondrial activity, and enhanced antioxidant capacity compared to conventional 30 % DMSO without encapsulation. This suggests that hydrogel encapsulation reduces pCPA concentration by 10 %, thereby mitigating toxic damage. Hydrogel encapsulation can reduce basement membrane shrinkage of testicular tissue during cryopreservation. Moreover, frozen tissues remained viable with preserved germ cells after being cultured for one week on alginate methacryloyl (AlgMA) hydrogel using the gas-liquid interphase method. Cryomicroscopy and DSC studies confirmed the hydrogel's ability to inhibit ice crystal growth. In conclusion, this study introduces novel strategies for male fertility preservation and advances cryopreservation technology for clinical applications in assisted reproduction.

Removal of endocrine disruptors and pharmaceuticals by graphene oxide-based membranes in water: A review

Membrane-based water treatment has emerged as a promising solution to address global water challenges. Graphene oxide (GO) has been successfully employed in membrane filtration processes owing to its reversible properties, large-scale production potential, layer-to-layer stacking, great oxygen-based functional groups, and unique physicochemical characteristics, including the creation of nano-channels. This review evaluates the separation performance of various GO-based membranes, manufactured by coating or interfacial polymerization with different support layers such as polymer, metal, and ceramic, for endocrine-disrupting compounds (EDCs) and pharmaceutically active compounds (PhACs). In most studies, the addition of GO significantly improved the removal efficiency, flux, porosity, hydrophilicity, stability, mechanical strength, and antifouling performance compared to pristine membranes. The key mechanisms involved in contaminant removal included size exclusion, electrostatic exclusion, and adsorption. These mechanisms could be ascribed to the physicochemical properties of compounds, such as molecular size and shape, hydrophilicity, and charge state. Therefore, understanding the removal mechanisms based on compound characteristics and appropriately adjusting the operational conditions are crucial keys to membrane separation. Future research directions should explore the characteristics of the combination of GO derivatives with various support layers, by tailoring diverse operating conditions and compounds for effective removal of EDCs and PhACs. This is expected to accelerate the development of surface modification strategies for enhanced contaminant removal.

Enhancing the antioxidant properties and compatibility of protein/sodium alginate film by incorporating Zanthoxylum bungeanum essential oil Pickering emulsion

Zanthoxylum bungeanum essential oil (ZBEO) Pickering emulsion was incorporated into rice protein (RP)/sodium alginate (SA)-based film to enhance the antioxidant activity and compatibility. With increasing ZBEO content from 2 % to 4 %, the average size of ZBEO Pickering emulsion ranged from 124.28 to 165.65 nm. The best mechanical property with a tensile strength of 14.56 MPa and hydrophobicity with a water vapor permeability of 2.11 × 10-12 g⋅cm-1⋅s-1⋅Pa-1 of emulsion film were achieved with 0.8 % ZBEO. In addition, the loss of ZBEO in the emulsion films was reduced by 11-14 %. The DPPH radical scavenging activity of emulsion film with 1.2 % ZBEO was 65.54 % in 95 % ethanol. The results of Fourier transform infrared spectroscopy and molecular dynamics simulation showed that electrostatic interactions played a leading role in film formation. Overall, ZBEO Pickering emulsion is an effective method to enhance the antioxidant activity, mechanical strength and hydrophobicity of RP/SA film.

Development of bioactive and environmentally friendly chitosan-based film using waste of pistachio dehulling process as a novel promising food packaging material

Chitosan films containing different amounts of pistachio hull methanol extract (PHE) (2 %, 4 %, 8 % w/v) were produced. LC-MS/MS analysis demonstrated that tannic acid (207.74 mg/g PHE), gallic acid (46.63 mg/g PHE), protocatechuic acid (27.79 mg/g PHE), quinic acid (16.41 mg/g PHE), isoquercitrin (15.2 mg/g PHE) were the most abundant phenolic compounds in PHE. The biological activity test results indicated that PHE enhanced the antioxidant and antibacterial activities of chitosan films. Chitosan-based films with 8 % PHE showed significant antimicrobial activity on all microorganisms tested. Chitosan films containing even the lowest concentration of PHE effectively inhibited DPPH free radicals, indicating a significant antioxidant activity. The increase in the amount of PHE caused a decrease in the L* value and an increase in the a* and b* values. It was found that the tensile strength and elongation at break of the films containing PHE were higher than those of the control film. Chitosan film with 4 % PHE exhibited the highest values of tensile strength (10.72 ± 1.06 MPa) and elongation at break (198.57 ± 10.34 %). FTIR analysis showed that PHE modified the intermolecular interactions in the film matrix, leading to the expansion of the CC bond and an increase in the intensity of the CO bands. Thermal analysis displayed that chitosan films incorporating PHE exhibited higher thermal stability compared to control films. PHE can be used as a bioactive supportive material in food packaging.

Chitosan/zein-based sustained-release composite films: Fabrication, physicochemical properties and release kinetics of tea polyphenols from polymer matrix

This study investigated the properties of chitosan/zein/tea polyphenols (C/Z/T) films and analyzed the release kinetics of tea polyphenols (TP) in various food simulants to enhance the sustainability and functionality of food packaging. The results revealed that TP addition enhanced the hydrophilicity, opacity and mechanical properties of film, and improved the compatibility between film matrix. 1.5 % TP film showed the lowest lightness (76.4) and the highest chroma (29.1), while 2 % TP film had the highest hue angle (1.5). However, the excessive TP (above 1 % concentration) led to a decrease in compatibility and mechanical properties of film. The TP concentration (2 %) resulted in the highest swelling degree in aqueous (750.6 %), alcoholic (451.1 %), and fatty (6.4 %) food simulants. The cumulative release of TP decreased to 16.32 %, 47.13 %, and 5.87 % with the increase of TP load in the aqueous, alcoholic, and fatty food simulants, respectively. The Peleg model best described TP release kinetics. The 2 % TP-loaded film showed the highest DPPH (97.13 %) and ABTS (97.86 %) free radical scavenging activity. The results showed TP release influenced by many factors and obeyed Fick's law of diffusion. This study offered valuable insights and theoretical support for the practical application of active films.

Fabrication and characterization of sodium alginate/blueberry anthocyanins/hinokitiol loaded ZIF-8 nanoparticles composite films with antibacterial activity for monitoring pork freshness

A smart film was developed to detect the freshness of pork by incorporating blueberry anthocyanins (BAs) and hinokitiol (HIN) loaded zeolite-imidazolium framework (HIN@ZIF-8) with into a sodium alginate matrix, and its microstructure and physicochemical properties were studied. The SA matrix was doped with BAs and HIN@ZIF-8 nanoparticles (SA-BAs/HIN@ZIF-8) to increase its tensile strength and reduce its water vapor permeability. HIN@ZIF-8 has low cytotoxicity, and SA-BAs/HIN@ZIF-8 membranes have long-lasting antimicrobial and highly sensitive color development properties against Escherichia coli and Staphylococcus aureus. The results of pork preservation experiments showed that SA-BA/HIN@ZIF-8 could extend the shelf life of pork to 6 days at 4 ℃. E-nose evaluation experiments showed that SA-BAs/HIN@ZIF-8 could inhibit compounds that cause unpleasant and irritating odours. Therefore, SA-BAs/HIN@ZIF-8 was considered to be an effective method to improve the freshness of pork, and the results showed that it has a promising application in food preservation.

Calcium alginate elastic capsules for microalgal cultivation

Calcium alginate elastic capsules with a core-shell structure are versatile spherical solid beads that can be produced in large quantities using various techniques. This type of capsule is a promising platform for cell culture applications, owing to its mechanical elasticity and transparency. This paper reports the production of calcium alginate capsules with high consistency, and for the first time, demonstrates the feasibility of the capsules for microalgal cultivation. Cell growth analysis reveals that the vibrationally-shaken calcium alginate elastic capsule platform yielded a higher maximum cell number (4.86 × 108 cells per mL) during the cultivation period than the control solution platforms. Aquafeed and food supplements for humans are the targeted applications of this novel platform.

Enhanced antioxidant and antibacterial activities of chitosan/zein nanoparticle Pickering emulsion-incorporated chitosan coatings in the presence of cinnamaldehyde and tea polyphenol

Pickering emulsions were prepared by using zein/chitosan nanoparticles as stabilizer and then incorporated into chitosan coatings. To improve the stability and performances, tea polyphenol and cinnamaldehyde (CA) were used to modulate the formation and functionalities of Pickering emulsions. The oil phase in Pickering emulsions were set at 5 % and 20 % to alter the hydrophobicity of chitosan coatings. Physical, structural, antioxidant and antibacterial activities of chitosan coatings with Pickering emulsions were characterized. Tea polyphenol significantly enhanced antioxidant capacity of chitosan coatings from 2.09 % to 57.61 % of DPPH value and from 2.63 % to 38.85 % of ABTS value. CA effectively increased the antibacterial activity of chitosan coatings against S. aureus and E. coli. Under 20 % oil content, the inhibition zones on S. aureus and E. coli increased from 3.03 ± 0.23 mm to 18.39 ± 1.22 mm and 7.66 ± 1.61 mm to 15.70 ± 1.75 mm, respectively. The preservative effect of chitosan coatings on fresh pork was further confirmed that the shelf-life of fresh pork could be extended by >4 days. These results suggested a great potential application of Pickering emulsion-incorporated chitosan coatings in the preservation of fresh pork.

Development of innovative active packaging films using gelatin/pullulan-based composites incorporated with cinnamon essential oil-loaded metal-organic frameworks for meat preservation

This study aimed to investigate the effect of cinnamon essential oil (CEO)-loaded metal-organic frameworks (CEO@MOF) on the properties of gelatin/pullulan (Gel/Pull)-based composite films (Gel/Pull-based films). The incorporation of CEO@MOF into Gel/Pull-based films demonstrated significant antimicrobial activity against S. aureus, S. enterica, E. coli, and L. monocytogenes. Additionally, CEO@MOF integrated film exhibited a 98.16 % ABTS radical scavenging, with no significant change in the mechanical properties of the neat Gel/Pull film. The UV blocking efficiency of the composite films increased significantly from 81.38 to 99.56 % at 280 nm with the addition of 3 wt% CEO@MOF. Additionally, Gel/Pull/CEO@MOF films effectively extended the shelf life of meat preserved at 4 °C by reducing moisture loss by 3.35 %, maintaining the pH within the threshold limit (6.2), and inhibiting bacterial growth by 99.9 %. These results propose that CEO@MOF has significant potential as an effective additive in active packaging to improve shelf life and food safety.

Physico-Chemical Characteristics of pH-Driven Active Film Loading with Curcumin Based on the Egg White Protein and Sodium Alginate Matrices

The low solubility and stability of fat-soluble curcumin in water limit its application in active packaging. This study explored the use of a pH-driven method to investigate the preparation and enhancement of the performance of films loaded with curcumin in a matrix of sodium alginate (Alg) and egg white protein (EWP). In this study, the EWP, Alg, and curcumin primarily bind through hydrogen bonding, electrostatic interactions, and hydrophobic interactions. Compared to EWP films, the films loaded with curcumin through the pH-driven method exhibited enhanced extensibility and water resistance, with an elongation at break (EB) of 103.56 ± 3.13% and a water vapor permeability (WVP) of 1.67 ± 0.03 × 10-10 g·m/m2·Pa·s. The addition of Alg improved the encapsulation efficiency and thermal stability of curcumin, thereby enhancing the antioxidant activity of the film through the addition of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals, which resulted in 106.95 ± 2.61 μg TE/g and 144.44 ± 8.89 μg TE/g, respectively. It is noteworthy that the detrimental effect of Alg on the color responsiveness of films containing curcumin has also been observed. This study provides a potential strategy and consideration for the loading of low water-soluble active substances and the preparation of active packaging.

Optimization and characterization of biodegradable films from chicken gelatin crosslinked with oxidized phenolic compounds

Chicken gelatin derived from poultry by-product was combined with caffeic acid (CA), rutin (RUT) and glycerol (GLY) to obtain biodegradable films. Optimum cross-linking conditions were investigated using Response Surface Methodology (RSM). The results showed that cross-linking led to lower L* value and higher b*, and the higher opacity values in the films. Water solubility (WS) decreased up to 50% after the incorporation of 1.25% CA compared to the commercial gelatin (cattle and pig based) films. Crosslinking improved the thermal stability and the tensile strength (TS) of films. Optimized cross-linking combination was determined as 0.96-1.56% CA, 0-1.25% RUT, and 29.5-30.5% GLY. Overall, this study demonstrated that crosslinking by CA and RUT can be used to improve the physical and barrier properties of gelatin films having excellent potential for the development of biodegradable films for packaging uses. These films may also result in an improvement and added value in poultry by-products.

Essential oil-loaded biopolymeric particles on food industry and packaging: A review

Essential oils (EOs) are liquid extracts derived from various parts of herbal or medicinal plants. They are widely accepted in food packaging due to their bioactive components, which exhibit remarkable antioxidant and antimicrobial properties against various pathogenic and food spoilage microorganisms. However, the functional efficacy of EOs is hindered by the high volatility of their bioactive compounds, leading to rapid release. Combining biopolymers with EOs forms a complex network within the polymeric matrix, reducing the volatility of EOs, controlling their release, and enhancing thermal and mechanical stability, favoring their application in food packaging or processing industries. This study presents a comprehensive overview of techniques used to encapsulate EOs, the natural polymers employed to load EOs, and the functional properties of EOs-loaded biopolymeric particles, along with their potential antioxidant and antimicrobial benefits. Additionally, a thorough discussion is provided on the widespread application of EOs-loaded biopolymers in the food industries. However, research on their utilization in confectionery processing, such as biscuits, chocolates, and others, remains limited. Further studies can be conducted to explore and expand the applications of EOs-loaded biopolymeric particles in food processing industries.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.

Evaluating the Incorporation of Myrtus communis L. Leaves Infusion in Alginate-Based Films and Spheres to Enhance the Oxidative Stability of Oil-in-Water Emulsions

Myrtus communis L. is a species of the Myrtaceae family that is found in the Mediterranean region, and it is traditionally recognized for its importance and different uses. The objective of this study was to determine the effect of M. communis L. leaf extract (MCLE), which was incorporated directly into alginate spheres and films, on preserving oil-in-water emulsions from oxidation. For this purpose, the solvent extraction (with ethanol at 40, 60, and 80%) of the antioxidant compounds was optimized (total phenolic compounds (TPCs) and total flavonoid content (TFC)) along with the scavenging activity. The best condition for the extraction corresponded with 60% ethanol (MCLE60), with a TPC of ~66.06 g GAE/L and a TFC of ~18.91 g QE/L, which was selected for use in the following assays. MCLE60 showed a considerable radical scavenging activity (24.85 mmol TE/L in FRAP, 28.75 mmol TE/L in DPPH, 30.61 mmol TE/L in ABTS, and 14.94 mmol TE/L in ORAC), which was probably due to its content in the phenolic compounds arbutin (122.08 mg/L), epicatechin (73.89 mg/L), sinapic acid (51.85 mg/L), and gallic acid (36.72 mg/L). The oil-in-water emulsions with the MCLE60 spheres showed the best oxidative stability (TBARS ~2.64 mg MDA/kg of emulsion, PV ~35.7 meq hydroperoxides/kg of emulsion) in comparison to the control. The film was also able to protect the emulsion from oxidation for more than a week at 30 °C (TBARS ~1.9 mg MDA/kg of emulsion). The alginate films with MCLE60 presented an important release of phenolic compounds in water and acetic food simulants, while in both ethanol simulants, the release of TPC remained more stable over time. Thus, this study highlights the potential uses of MCLE as a natural ingredient for emulsion oxidative preservation and the production of alginate delivery systems (spheres and films).

Effect of tea polyphenols on chitosan packaging for food preservation: Physicochemical properties, bioactivity, and nutrition

Chitosan packaging has been widely studied for food preservation, the application of which is expanded by the incorporation of tea polyphenols. This paper reviews the influence of tea polyphenols incorporation on chitosan-based packaging from the perspectives of physicochemical properties, bioactivity used for food preservation, and nutritional value. The physicochemical properties included optical properties, mechanical properties, water solubility, moisture content, and water vapor barrier property, concluding that the addition of tea polyphenols improved the opacity, water solubility, and water vapor barrier property of chitosan packaging, and the mechanical properties and water content were decreased. The bioactivity used for food preservation, that is antioxidant and antimicrobial properties, is enhanced by tea polyphenols, improving the preservation of food like meat, fruits, and vegetables. In the future, efforts will be needed to improve the mechanical properties of composite film and adjust the formula of tea polyphenols/chitosan composite film to apply to different foods. Besides, the identification and development of high nutritional value tea polyphenol/chitosan composite film is a valuable but challenging task. This review is expected to scientifically guide the application of tea polyphenols in chitosan packaging.

A novel film based on a cellulose/sodium alginate/gelatin composite activated with an ethanolic fraction of Boswellia sacra oleo gum resin

Boswellia sacra and its derivatives exhibit notable bioactive properties, which have been the subject of extensive scientific research; however, their potential applications in food packaging remain largely untapped. In the current study, cellulose, sodium alginate, and gelatin composite edible films were fabricated with the addition of different concentrations (0.2% and 0.3%) of the ethanolic fraction of Boswellia sacra oleo gum resin (BSOR). The resultant films were examined for their physical, chemical, mechanical, barrier, optical, and antioxidant properties. Moreover, the films were characterized using Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) to study the impact of incorporating BSOR on the morphological, crystalline, and chemical properties of the films. The addition of BSOR increased the film thickness (0.026-0.08 mm), water vapor permeability (0.210-0.619 (g.mm)/(m2.h.kPa), and the intensity of the yellow color (3.01-7.20) while reducing the values of both tensile strength (6.67-1.03 MPa) and elongation at break (83.50%-48.81%). SEM and FTIR analysis confirmed the interaction between the BSOR and film-forming components. The antioxidant properties of the edible films were significantly increased with the addition of BSOR. The comprehensive findings of the study demonstrated that BSOR possesses the potential to serve as an efficient natural antioxidant agent in the fabrication of edible films.

A comparison study on effects of polyglycerols on physical properties of alginate films

The water solubility and brittleness of unplasticized sodium alginate (SA) films hinder their widely application. Glycerol (GLY), the most commonly used plasticizer, is compatible with alginate due to the formation of hydrogen bonding owing to the hydroxyl functional groups. However, GLY is a small water-soluble molecule, and the resulting leaching problem may lead to decline in mechanical properties of SA films. Aimed at better plasticizers for alginate (ALG) films, this work focuses on the effects of polymerization degree of polyglycerol on physical properties of ALG films. The cross-sectional morphology, crystallinity, mechanical and thermal properties, water solubility, water content and barrier property of ALG films plasticized with GLY, triglycerol (TG) and decaglycerol (DG) were characterized and discussed. Results illustrated that owing to the long molecular chains of TG and DG and their strong interactions with ALG matrix, the plasticized films possessed better mechanical properties, higher water content and lower water solubility. Moreover, it was worth mentioning that even after water treatment, the mechanical properties of ALG-TG and ALG-DG films were superior than that plasticized with GLY. The results of this study were believed to provide particular insights into the plasticization mechanism and the improvement in performance of SA films in packaging applications.

Intelligent active films of sodium alginate and konjac glucomannan mixed by Lycium ruthenicum anthocyanins and tea polyphenols for milk preservation and freshness monitoring

To achieve real-time monitoring of food freshness, a pH-responsive film based on sodium alginate-konjac glucomannan loaded with Lycium ruthenicum anthocyanins (LRA) was prepared, with the addition of tea polyphenols (TP) to enhance the stability of LRA. The surface structure of the films was observed by AFM. The results of FTIR and molecular docking simulation showed that LRA and TP were bound to polysaccharide by hydrogen bonds. The mechanical properties, barrier properties, and antioxidant/antibacterial properties of the films were significantly improved and the films showed obvious color response to pH. Notably, the AFM images showed TP and LRA could lead to more severe damage to the bacterial structure. The results of molecular docking simulation suggested that TP and LRA could act on different components of the bacterial cell wall, indicating their synergistic mechanism in antimicrobial activity. Moreover, the stability of LRA was improved due to the interactions of TP and polysaccharides with LRA. The aggregates formed by TP and LRA were clearly observed by AFM. Finally, the film showed excellent preservation and freshness monitoring effect in milk. In conclusion, TP-LRA-SA-KGM intelligent film exhibited excellent performance and represented a promising novel food packaging material with potential applications.

Preparation, characterization and application of pH-responsive smart film based on chitosan/zein and red radish anthocyanin

This research was aimed at developing a novel pH-responsive smart film made of chitosan, zein and red radish anthocyanin (RRA). The morphology, interaction, crystallization, thermal stability, physiochemical properties and pH sensitivity of films were analyzed. The smart film was applied to monitor the freshness of mushroom (Agaricus bisporus). The results of morphology (SEM) and spectrum (FT-IR and XRD) indicated that the incorporation of RRA could enhance the interaction between polymer matrix. The addition of RRA had no significant effect on the thermal stability of films. The chitosan/zein/red radish anthocyanin (C/Z/R) films exhibited higher tensile strength, Young's modulus, hydrophobicity, antioxidant activity and lower elongation at break. The C/Z/R films had stronger water vapor and gas barrier capacity. The C/Z/R films showed a pH-sensitive color variation from red (pH 2) to green (pH 12) and good reversibility under alkaline and acidic environment. The prepared smart film could be successfully used for the quality monitoring of mushroom.

Enhanced mechanical and functional properties of chitosan/polyvinyl alcohol/hydroxypropyl methylcellulose/alizarin composite film by incorporating cinnamon essential oil and tea polyphenols

In this study, cinnamon essential oil and tea polyphenols were added to chitosan/ polyvinyl alcohol/ hydroxypropyl methylcellulose/ alizarin composite films to enhance their mechanical and functional properties. Their addition to the composite films enhanced their antibacterial and antioxidant properties and significantly improved its elongation at break (p < 0.05). Cinnamon essential oil reduced the water vapor permeability, water content, and water solubility of composite films and improved their transparency. The composite films with additive exhibited excellent UV-barrier ability and pH responsivity. Fourier Transform infrared spectroscopy and X-Ray Diffraction analyses confirmed hydrogen bond formation between the polymer molecules and additives. The results of Scanning Electron Microscope-Focused Ion Beam revealed improved surface and cross-section morphology of the films, leading to the generation of a cross-linked structure. Thermogravimetric and differential scanning calorimetry analysis indicated enhanced thermal stability of the composite films upon cinnamon essential oil addition. Analysis of storage quality indicators (TBARS value, TVC, and TVB-N) revealed that the composite films could prolong the freshness of surimi. The incorporation of cinnamon essential oil and tea polyphenols into the composite films has demonstrated significant potential as an effective and natural alternative for active food packaging.

Comparison of in vitro starch digestibility and structure of matcha-fortified starch vermicelli from different botanical sources

BACKGROUND

In a study to explore the utilization of polyphenols in complex digestive systems, starch-based vermicelli was employed as the carrier and matcha (MT) was used as the source of polyphenols. Four percent MT was extruded with A-, B-, and C-type starch of rice, sweet potato, and mung bean to prepared starch vermicelli rice starch vermicelli (RSV), sweet potato starch vermicelli (SPSV), and mung bean starch vermicelli (MBSV), respectively. The multi-scale structure of starch, the digestive kinetics of starch, and the bioaccessibility of polyphenols during in vitro digestion were monitored.

RESULTS

Matcha did not change the crystal configuration of vermicelli, but increased the relative crystallinity of RSV. Vermicelli with MT possessed a more uniform structure, and the polydispersity index decreased from 3.85-4.89 to 2.56-3.69. However, these structural changes made only a limited contribution to delaying digestion. The detection of polyphenols during digestion revealed that the release of most polyphenols was accomplished in the first 20 min of digestion. The release amount was in the order RSV + MT > MBSV + MT > SPSV + MT, and reached 4.81-5.45 mg GAE g-1 . Correspondingly, the activity of digestive enzyme decreased in the order RSV + MT < MBSV + MT < SPSV + MT. Consequently, MT significantly (P < 0.05) reduced the digestive rate of vermicelli, and the rapidly digested starch and predicted glycemic index of RSV + MT decreased from 71.28% to 56.31% and from 74.68 to 62.86, respectively. The released polyphenols were also the main source of the strong antioxidant capacity of vermicelli with MT.

CONCLUSIONS

These results provided a theoretical basis for using polyphenols to pursue healthy starch-based food. © 2023 Society of Chemical Industry.

Alginate-based edible coating with oregano essential oil/β-cyclodextrin inclusion complex for chicken breast preservation

A sodium alginate (SA) edible coating containing oregano essential oil (OEO)/β-cyclodextrin (β-CD) inclusion complexes (SA/OEO-MP coating) was developed to extend the shelf life of fresh chicken breast during refrigeration storage. First, OEO was inserted into the hydrophobic interior of β-CD to form an inclusion complex (OEO-MP) that maintained its excellent antioxidant and antibacterial activities. The formed OEO-MP was characterized using fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). In addition, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) results demonstrated that β-CD could improve the thermal stability of OEO. The encapsulation efficiency reached 71.6 %, and OEO was released continuously from the OEO-MP. The lipid oxidation, total viable count (TVC) and sensory properties of chicken breasts were regularly monitored when OEO-MP was incorporated into the SA coating for chicken breast preservation. Compared with the uncoated group, the SA/OEO-MP-coated groups showed significantly reduced increases in pH, thiobarbituric acid reactive substances (TBARS), total volatile base nitrogen (TVB-N), and TVC, especially in the SA/OEO-MP1 group. In summary, the SA/OEO-MP coating could preserve the chicken breast by reducing lipid oxidation and inhibiting the proliferation of microorganisms. It would be developed as a prospective edible packaging for chicken preservation.

Tea polyphenols coated sodium alginate-gelatin 3D edible scaffold for cultured meat

This study aimed to use edible scaffolds as a platform for animal stem cell expansion, thus constructing block-shaped cell culture meat. The tea polyphenols (TP)-coated 3D scaffolds were constructed of sodium alginate (SA) and gelatin (Gel) with good biocompatibility and mechanical support. Initially, the physicochemical properties and mechanical properties of SA-Gel-TP scaffolds were measured, and the biocompatibility of the scaffolds was evaluated by C2C12 cells. SEM results showed that the scaffold had a porous laminar structure with TP particles attached to the surface, while FT-IR results also demonstrated the encapsulation of TP coating on the scaffold. In addition, the porosity of all scaffolds was higher than 40% and the degradation rate during the incubation cycle was less than 40% and the S2-G1-TP0.1-3 h scaffold has excellent cell adhesion and extension. Subsequently, we inoculated rabbit skeletal muscle myoblasts (RbSkMC) on the scaffold and induced differentiation. The results showed good adhesion and extension behavior of RbSkMC on S2-G1-TP0.1-3 h scaffolds with high expression of myogenic differentiation proteins and genes, and SEM results confirmed the formation of myotubes. Additionally, the adhesion rate of cells on scaffolds with TP coating was 1.5 times higher than that on scaffolds without coating, which significantly improved the cell proliferation rate and the morphology of cells with extension on the scaffolds. Furthermore, rabbit-derived cultured meat had similar appearance and textural characteristics to fresh meat. These conclusions indicate the high potential of the scaffolds with TP coating as a platform for the production of cultured meat products.

One-step fabrication of cell sheet-laden hydrogel for accelerated wound healing

Full-thickness skin wounds are have continued to be reconstructive challenges in dermal and skin appendage regeneration, and skin substitutes are promising tools for addressing these reconstructive procedures. Herein, the one-step fabrication of a cell sheet integrated with a biomimetic hydrogel as a tissue engineered skin for skin wound healing generated in one step is introduced. Briefly, cell sheets with rich extracellular matrix, high cell density, and good cell connections were integrated with biomimetic hydrogel to fabricate gel + human skin fibroblasts (HSFs) sheets and gel + human umbilical vein endothelial cells (HUVECs) sheets in one step for assembly as a cell sheet-laden hydrogel (CSH). The designed biomimetic hydrogel formed with UV crosslinking and ionic crosslinking exhibited unique properties due to the photo-generated aldehyde groups, which were suitable for integrating into the cell sheet, and ionic crosslinking reduced the adhesive force toward the substrate. These properties allowed the gel + cell sheet film to be easily released from the substrate. The cells in the harvested cell sheet maintained excellent viability, proliferation, and definite migration abilities inside the hydrogel. Moreover, the CSH was implanted into a full-thickness skin defects to construct a required dermal matrix and cell microenvironment. The wound closure rate reached 60.00 ± 6.26% on the 2nd day, accelerating mature granulation and dermis formation with skin appendages after 14 days. This project can provide distinct guidance and strategies for the complete repair and regeneration of full-thickness skin defects, and provides a material with great potential for tissue regeneration in clinical applications.

Carboxymethyl chitosan/sodium alginate hydrogel films with good biocompatibility and reproducibility by in situ ultra-fast crosslinking for efficient preservation of strawberry

Strawberry is a seasonal and regional fruit. Thus, strawberry waste caused by spoilage and decay is an urgent problem that must be solved. Developing hydrogel films (HGF) for multifunctional food packaging can effectively slow down strawberry. Based on the carboxymethyl chitosan/sodium alginate/citric acid with excellent biocompatibility, preservation effect, and ultrafast (10 s) coating on the strawberry surface, HGF specimens were designed and prepared through the electrostatic interaction of opposite charges between polysaccharides. The prepared HGF specimen exhibited excellent low moisture permeability and antibacterial properties. Its lethality rates against both Escherichia coli and Staphylococcus aureus were more than >99 %. The HGF could keep strawberries fresh for up to 8, 19, and 48 days at 25.0, 5.0, and 0 °C, respectively, by delaying the fruits' ripening, dehydration, microbial invasion, and respiration rate. The HGF dissolved and regenerated five times still exhibited good performance. The water vapor transmission rate of the regenerative HGF could reach 98 % of that of the original HGF. The regenerative HGF could maintain the freshness of strawberries for up to 8 days at 25.0 °C. This study provides new insight into an alternative film design for convenient, green, and renewable alternative films to delay perishable fruit spoilage.

Polysaccharide-Based Edible Films/Coatings for the Preservation of Meat and Fish Products: Emphasis on Incorporation of Lipid-Based Nanosystems Loaded with Bioactive Compounds

The high water and nutritional contents of meat and fish products make them susceptible to spoilage. Thus, one of the most important challenges faced by the meat industry is extending the shelf life of meat and fish products. In recent years, increasing concerns associated with synthetic compounds on health have limited their application in food formulations. Thus, there is a great need for natural bioactive compounds. Direct use of these compounds in the food industry has faced different obstacles due to their hydrophobic nature, high volatility, and sensitivity to processing and environmental conditions. Nanotechnology is a promising method for overcoming these challenges. Thus, this article aims to review the recent knowledge about the effect of biopolymer-based edible films or coatings on the shelf life of meat and fish products. This study begins by discussing the effect of biopolymer (pectin, alginate, and chitosan) based edible films or coatings on the oxidation stability and microbial growth of meat products. This is followed by an overview of the nano-encapsulation systems (nano-emulsions and nanoliposomes) and the effect of edible films or coatings incorporated with nanosystems on the shelf life of meat and fish products.

Realizing Eco-Friendly Water-Resistant Sodium-Alginate-Based Films Blended with a Polyphenolic Aqueous Extract from Grape Pomace Waste for Potential Food Packaging Applications

Water-resistant and environmentally friendly sodium-alginate-based films have been investigated to develop functional materials to extend the food's shelf-life. A water-stable alginate-based film was prepared, employing both the internal and external gelation approach in the presence of CaCl₂. To apply this film to food packaging and thus preserve food quality, the aim of this work is to perform a chemical and physical characterization of the proposed materials, evidencing the main features and stability under different work conditions. Water contact angle measurements showed a value of 65°, suggesting an important reduced hydrophilic character of the obtained alginate films due to the novel CaCl₂-induced compacted polymer network. The film's stability was thus checked through swelling measurements in water after varying pH, temperature, and ionic strength. The film was stable at high temperatures and not pH-responsive. Only highly concentrated salt-based solutions negatively affected the proposed packaging, causing a large swelling. Furthermore, a water-based polyphenolic extract from grape (Vitis vinifera L.) pomace waste was embedded inside the films in different amounts in order to confer additional properties. The extract's polyphenolic content (evaluated from HPLC/MS-MS measurements) endowed the films' UV-light screening and enhanced antioxidant properties. These important findings suggest the additional potential role of these films in protecting food from light deterioration. The stability of these hybrid films was also checked by observation, as the polyphenols' presence did not largely alter the alginate network that occurred yet was water-resistant under the described work conditions.

Innovative Materials with Possible Applications in the Wound Dressings Field: Alginate-Based Films with Moringa oleifera Extract

For a long time, biopolymers have proven their effectiveness in the development of materials with various applications, lately those intended for the biomedical and pharmaceutical industries, due to their high biocompatibility and non-toxic, non-allergenic, and non-immunogenic nature. The ability to incorporate various active substances in this matrix has yielded materials with characteristics that are far superior to those of classic, conventional ones. The beneficial effects of consuming Moringa oleifera have promoted the use of this plant, from Ayurvedic to classical medicine. The addition of such compounds in the materials intended for the treatment of surface wounds may represent the future of the development of innovative dressings. This study followed the development of materials based on sodium alginate and moringa powder or essential oil for use as dressings, pads, or sheets. Thus, three materials with the addition of 10-30% moringa powder and three materials with the addition of 10-30% essential oil were obtained. The data were compared with those of the control sample, with sodium alginate and plasticizer. The microtopography indicated that the materials have a homogeneous matrix that allows them to incorporate and maintain natural compounds with prolonged release. For example, the sample with 30% moringa essential oil kept its initial shape and did not disintegrate, although the swelling ratio value reached 4800% after 20 min. After testing the mechanical properties, the same sample had the best tensile strength (TS = 0.248 MPa) and elongation (31.41%), which is important for the flexibility of the dressing. The same sample exhibited a very high antioxidant capacity (60.78% inhibition). The materials obtained with moringa powder added presented good values of physical and mechanical properties, which supports their use as wound dressings for short-term application and the release of embedded compounds. According to the obtained results, all the biopolymeric materials with moringa added can be used as dressings for different wound types.

Composite films of sodium alginate and konjac glucomannan incorporated with tea polyphenols for food preservation

At present, food waste has become a serious issue and the use of petroleum-based food packaging films has resulted in a series of potential hazards. Therefore, more attention has been focused on the development of new food packaging materials. The polysaccharide-based composite film loaded with active substances considered to be an excellent preservative material. A novel packaging film based on sodium alginate and konjac glucomannan (SA-KGM) blended with tea polyphenols (TP) was prepared in the present study. The excellent microstructure of films was shown by atomic force microscopy (AFM). It was indicated by FTIR spectra that the components could interact with each other through hydrogen bonds, which was also confirmed by molecular docking simulation. Meanwhile, the mechanical properties, barrier property, oxidation property, antibacterial activity, and stability of the structure of the TP-SA-KGM film were significantly improved. The AFM images and results of molecular docking simulation indicated that TP could affect the cell wall of bacteria by acting with peptidoglycan. Finally, the film showed excellent preservation effects in both beef and apples, which suggested that TP-SA-KGM film could be a novel bioactive packaging material with wide application potential in food preservation.

Encapsulation of Tea Polyphenol in Zein through Complex Coacervation Technique to Control the Release of the Phenolic Compound from Gelatin-Zein Composite Film

Green tea polyphenol (TP) was encapsulated in zein and fabricated into a gelatin-zein composite film by complex coacervation. Transglutaminase (TG) crosslinking was employed to obtain a compact structural orientation of the film to prolong the release of bioactive compounds. The encapsulation efficiency of zein and the TP release rate from the composite film were investigated. The retention rate was over 30% and 80% after film fabrication and storage, respectively. Crosslinking decreased the diffusion coefficient by half, thus improving the release of TP from the film. The antioxidant properties were satisfactory after discharge from the film detected by DPPH/ABTS scavenging. The value of crosslinking degree (~60%) and increased molecular weight of the protein were investigated by SDS-PAGE, indicating the compatibility of TP and TG treatment. According to physicomechanical findings, the TG2TP1 film exhibited the best characteristics. Tensile strength and water solubility properties were ameliorated by the TG treatment of TP-encapsulated films compared to the control film. TG and TP-loaded gelatin-zein composite film had better thermal stability than the control film. Moreover, the TP loading reduced the transparency value and improved the light-barrier properties of the film. The films showed significant antimicrobial activities against two food-borne bacteria, including Staphylococcus aureus BCTC13962 and Escherichia coli BCRC10675. The result obtained shows that the encapsulation of TP and TG treatment may be used to fabricate gelatin-zein composite film with controlled release of phenolic compounds for active packaging applications.

Encapsulation of tea polyphenols into high amylose corn starch composite nanofibrous film for active antimicrobial packaging

Starch-based composite nanofibrous films loaded with tea polyphenols (TP) were successfully fabricated through electrospinning high amylose corn starch (HACS) with aid of polyvinyl alcohol (PVA), referred as HACS/PVA@TP. With the addition of 15 % TP, HACS/PVA@TP nanofibrous films exhibited enhanced mechanical properties and water vapor barrier capability, and their hydrogen bonding interactions were further evidenced. TP was slowly released from the nanofibrous film and followed Fickian diffusion mechanism, which achieved the controlled sustained release of TP. Interesting, HACS/PVA@TP nanofibrous films effectively improved antimicrobial activities against Staphylococcus aureus (S. aureus) and prolonged the shelf life of strawberry. HACS/PVA@TP nanofibrous films showed superior antibacterial function by by destroying cell wall and cytomembrane, and degrading existing DNA fragments, stimulating excessive intracellular reactive oxygen species (ROS) generation. Our study demonstrated that the functional electrospun Starch-based nanofibrous films with enhanced mechanical properties and superior antimicrobial activities were potential for the application in active food packaging and relative areas.

Silica nanoparticles loaded with caffeic acid to optimize the performance of cassava starch/sodium carboxymethyl cellulose film for meat packaging

Cassava starch/sodium carboxymethyl cellulose (CC) was used as the substrate to create a multipurpose food packaging film, and caffeic acid@silica nanoparticles (C@SNPs) was added. The encapsulation rate of caffeic acid in C@SNPs was 84.7 ± 0.97 %. According to SEM pictures, the nanoparticles were evenly dispersed throughout the film and exhibited good compatibility with the other polymers. C@SNPs was added, which enhanced the physical characteristics of film and decreased its water solubility. The best mechanical and oxygen barrier qualities among them are found in the C@SCC_5:1 film, whose tensile strength rises from 7.17 MPa to 15.44 MPa. The C@SCC_5:1 film has scavenging rates of 95.43 % and 84.67 % against ABTS and DPPH free radicals, respectively, and CA can be released continuously in various food systems. In addition, the antibacterial rate of E. coli O157:H7 and S. aureus of C@SCC_5:1 film in meat was 99.9 %, and it can effectively delay lipid oxidation and pH rise. In conclusion,C@SCC_5:1 film is a new type of antibacterial and antioxidant food packaging material.

Fabrication, Characterization, and Antioxidant Potential of Sodium Alginate/Acacia Gum Hydrogel-Based Films Loaded with Cinnamon Essential Oil

Several studies have reported the advantages of incorporating essential oils in hydrogel-based films for improving their physiochemical and antioxidant attributes. Cinnamon essential oil (CEO) has great potential in industrial and medicinal applications as an antimicrobial and antioxidant agent. The present study aimed to develop sodium alginate (SA) and acacia gum (AG) hydrogel-based films loaded with CEO. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), and texture analysis (TA) were performed to analyze the structural, crystalline, chemical, thermal, and mechanical behaviour of the edible films that were loaded with CEO. Moreover, the transparency, thickness, barrier, thermal, and color parameters of the prepared hydrogel-based films loaded with CEO were also assessed. The study revealed that as the concentration of oil in the films was raised, the thickness and elongation at break (EAB) increased, while transparency, tensile strength (TS), water vapor permeability (WVP), and moisture content (MC) decreased. As the concentration of CEO increased, the hydrogel-based films demonstrated a significant improvement in their antioxidant properties. Incorporating CEO into the SA-AG composite edible films presents a promising strategy for producing hydrogel-based films with the potential to serve as food packaging materials.

Preparation, characterization and biological activity of phosphorylated surface deacetylated chitin nanofibers

Phosphorylation is a key route to achieve varieties of biological activities for polysaccharides. Here, we report the phosphorylated surface deacetylated chitin nanofibers (PS-ChNFs) using the sodium tripolyphosphate/sodium trimetaphosphate (STPP/STMP) method. Response surface methodology (RSM) was employed to optimize in this study. Under optimal conditions, a maximum degree of substitution (DS) of 0.13 was obtained. In addition, the structures of PS-ChNFs were investigated by Fourier transform infrared spectroscopy (FT-IR), Nuclear Magnetic Resonance spectra (NMR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM) and (Energy Dispersive Spectroscopy-mapping) EDS-mapping. The findings revealed that the FT-IR spectroscopy and XPS analysis confirmed the appearance of phosphate groups in PS-ChNFs. The ³¹P NMR results indicate that the PS-ChNFs structure has characteristic peaks of P elements. SEM images showed that PS-ChNFs had a rough surface with many cavities, but the P elements on the surface of the EDS-mapping are uniformly distributed throughout the sample without any enrichment. Antioxidant and antibacterial test showed that PS-ChNFs had significant scavenging effect on free radicals and antibacterial effect. The above results indicate that the chemical modification of PS-ChNFs was successful.

Correlation between Mechanical and Morphological Properties of Polyphenol-Laden Xanthan Gum/Poly(vinyl alcohol) Composite Cryogels

This study aimed to evaluate the effect of the synthesis parameters and the incorporation of natural polyphenolic extract within hydrogel networks on the mechanical and morphological properties of physically cross-linked xanthan gum/poly(vinyl alcohol) (XG/PVA) composite hydrogels prepared by multiple cryo-structuration steps. In this context, the toughness, compressive strength, and viscoelasticity of polyphenol-loaded XG/PVA composite hydrogels in comparison with those of the neat polymer networks were investigated by uniaxial compression tests and steady and oscillatory measurements under small deformation conditions. The swelling behavior, the contact angle values, and the morphological features revealed by SEM and AFM analyses were well correlated with the uniaxial compression and rheological results. The compressive tests revealed an enhancement of the network rigidity by increasing the number of cryogenic cycles. On the other hand, tough and flexible polyphenol-loaded composite films were obtained for a weight ratio between XG and PVA of 1:1 and 10 v/v% polyphenol. The gel behavior was confirmed for all composite hydrogels, as the elastic modulus (G') was significantly greater than the viscous modulus (G″) for the entire frequency range.

Development and characterization of tapioca starch/pectin composite films incorporated with broccoli leaf polyphenols and the improvement of quality during the chilled mutton storage

This study aimed at the composition of active packaging film from tapioca starch/pectin (TSP) incorporated with broccoli leaf polyphenols (BLP) was prepared and applied to improve the qualities of the chilled mutton during storage. The results indicated the addition of BLP significantly improved the thickness, density, barrier ability, mechanical properties, water solubility and antioxidant activity of the composite films while inducing decreases in the brightness (p < 0.05), enhancing inter-molecular interactions of TSP + BLP composite films. The WVP, oxygen permeability and elongation at break of the composite film reached the minimum when BLP concentration was 3 % while exhibiting the highest tensile strength and the best performance. This composite film delayed microbial growth and minimized oxidative rancidity during chilled mutton storage, causing the improvement of its quality and extending its shelf life to 12 days. Therefore, TSP + BLP composite films possessed the promise to be applied as bioactive materials in food packaging sectors.

Immobilization of Alpha Acetolactate Decarboxylase in Hybrid Gelatin/Alginate Support for Application to Reduce Diacetyl Off-Flavor in Beer

Beer production is the largest among alcoholic beverages. Its production process is complex and demands several steps. Lager beers commonly present an off-flavor of butter that is due to the presence of diacetyl, and to avoid such a problem, a long period of maturation (3–5 weeks) is required. Another way is the application of (α-acetolactate decarboxylase) ALDC to accelerate the process. The objectives of the present work were to develop a low-cost support using gelatin, a residue from capsules from the nutraceutical industry, to immobilize the ALDC enzyme. For this, the yield, efficiency and activity recovered, and the stability of free and immobilized enzymes at different temperatures and pH were evaluated. To evaluate the capacity of immobilized enzymes when applied directly to beer and their operational stability, three concentrations of glutaraldehyde (1%, 2.5% and 5%) were tested in distilled water as a cross-linking agent. The best results obtained were 95.6%, 27.0% and 23.6%, respectively, for yield, efficiency and activity recovery. Immobilization provided a high activity over a wide pH range. The immobilized enzyme showed greater stability at temperatures of 50 and 60 °C. The immobilized derivative showed adequate reuse capacity, and its dehydrated form had excellent activity after long periods of storage.

The Effect of Sage (Salvia sclarea) Essential Oil on the Physiochemical and Antioxidant Properties of Sodium Alginate and Casein-Based Composite Edible Films

The aim of this study was to examine the effect of Sage (Salvia sclarea) essential oil (SEO) on the physiochemical and antioxidant properties of sodium alginate (SA) and casein (CA) based films. Thermal, mechanical, optical, structural, chemical, crystalline, and barrier properties were examined using TGA, texture analyzer, colorimeter, SEM, FTIR, and XRD. Chemical compounds of the SEO were identified via GC–MS, the most important of which were linalyl acetate (43.32%) and linalool (28.51%). The results showed that incorporating SEO caused a significant decrease in tensile strength (1.022–0.140 Mpa), elongation at break (28.2–14.6%), moisture content (25.04–14.7%) and transparency (86.1–56.2%); however, WVP (0.427–0.667 × 10−12 g·cm/cm2·s·Pa) increased. SEM analysis showed that the incorporation of SEO increased the homogeneousness of films. TGA analysis showed that SEO-loaded films showed better thermal stability than others. FTIR analysis revealed the compatibility between the components of the films. Furthermore, increasing the concentration of SEO increased the antioxidant activity of the films. Thus, the present film shows a potential application in the food packaging industry.

Effect of Black Tea Powder on Antioxidant Activity and Gel Characteristics of Silver Carp Fish Balls

The effect of black tea powder on the antioxidant activity and gel characteristics of fish balls from silver carp were investigated after freezing storage for 7 days. The results show that black tea powder with different concentrations of 0.1%, 0.2% and 0.3% (w/w) could significantly increase the antioxidant activity of fish balls (p < 0.05). In particular, at the concentration of 0.3%, the antioxidant activity was the strongest among these samples, where the reducing power, DPPH, ABTS and OH free radical scavenging rate were up to 0.33, 57.93%, 89.24% and 50.64%, respectively. In addition, black tea powder at the level of 0.3% significantly increased the gel strength, hardness and chewiness while greatly reducing the whiteness of the fish balls (p < 0.05). ESEM observation found that the addition of black tea powder could promote the crosslinking of proteins and reduced the pore size of the gel network structure of the fish balls. The results suggest that black tea powder could be used as a natural antioxidant and gel texture enhancer in fish balls, which we found to be much related to the phenolic compounds of black tea powder.

Effects of grape seed oil nanoemulsion on physicochemical and antibacterial properties of gelatin‑sodium alginate film blends

The present study aimed to evaluate the impact of incorporating grape seed oil (GSO) nanoemulsion (NE) at varying concentrations into the film matrix on the physicochemical and antimicrobial properties of the resulting films. In this study, ultrasonic treatment was used to prepare GSO-NE, and different levels (2, 4, and 6 %) of nanoemulsioned GSO were incorporated into gelatin (Ge)/sodium alginate (SA)-based films to produce films with improved physical and antibacterial properties. The results revealed that incorporation of GSO-NE at 6 % concentration decreased the tensile strength (TS) and puncture force (PF) significantly (p < 0.05). The whiteness index (WI) of the films decreased from 63.4 to 47.79, while the total color change (ΔE) increased significantly (p < 0.05) with the increase in GSO-NE concentration. Thermogravimetric analysis (TGA) results showed that GSO-NE at different concentrations had improved the thermal stability of Ge/SA-based films. The incorporation of GSO-NE into the films led to the formation of a slightly porous structure. The incorporation of GSO-NE at 4 and 6 % concentrations decreased the water vapor permeability (WVP), moisture content (MC) %, and water solubility (WS) % significantly (p < 0.05). All composite films exhibited hydrophobic surfaces with contact angles θ > 90°. Ge/SA/GSO-NE films were found to be effective against both Gram-positive and Gram-negative bacteria. The prepared active films containing GSO-NE had a high potential for preventing food spoilage in food packaging.

Extrusion-blown starch/PBAT biodegradable active films incorporated with high retentions of tea polyphenols and the release kinetics into food simulants

To reduce thermal degradation of tea polyphenols (TP) in final active packaging materials, poly(butylene adipate-co-terephthalate) (PBAT), starch, plasticizer, and TP were directly synthesized into masterbatches by one-pot method in this study without pre-dispersion, and then blown into active films. TP interacted with starch through hydrogen bonds, with little interaction with PBAT. Barrier properties were improved by incorporating TP into the films, whereas mechanical properties slightly decreased. Blending starch into PBAT greatly accelerated the degradation of the film. And the incorporation of TP slowed down the short-term degradation of the starch/PBAT film, but accelerated the long-term degradation. The initial total polyphenol content in the active film was positively related to the TP loading, whereas the initial retention rate remained above 95 % regardless of TP loadings. The retention rate of TP in active films decreased with storage time, but it was still above 80 % after 12 months, with a favorable stability. TP-loaded films displayed efficient antioxidant and antimicrobial activities with strong dose dependence. The release of TP into food simulants was mainly induced by random diffusion, with little effect from polymer swelling. The short-term release kinetics was well described by Fick's second law. This work has demonstrated the feasibility of TP being incorporated into the active films with high retention through high-throughput fabrication, which provides formula and technical options for the industrial development of active packaging materials.

Dragon Fruit Peel Extract Enriched-Biocomposite Wrapping Film: Characterization and Application on Coconut Milk Candy

Bio-based film is an eco-friendly alternative to petroleum-based packaging film. The effects of biocomposite wrapping film enhanced with dragon fruit peel extract (0, 2% w/v, respectively) and currently used commercial packaging film (polypropylene; PP) on coconut milk caramels during storage (30 °C, 75% RH, nine days) were studied. Both 0% and 2% DPE-enriched biocomposite films were thicker and had higher water vapor permeability and solubility than the PP film but poorer mechanical characteristics. In addition, the 2% film possessed antioxidants and antioxidant ability. A FESEM micrograph revealed the rough surface and porous path of the biocomposite films. Over the storage time, the moisture content, water activity, and springiness of the coconut milk caramel candy wrapped in the PP and all DPE-enriched biocomposite films were not significantly altered. However, the lipid oxidation as the thiobarbituric acid reactive substance (TBARS) and hardness of all coconut caramels were significantly (p < 0.05) increased during storage. Furthermore, the hardness of coconut candy covered in the control (0% DPE) biocomposite film was more pronounced on day nine of storage. However, the changes in quality characteristics of the coconut candy wrapped in each film type need to be better established. The investigating factors influencing the quality deterioration of coconut milk candy should be further identified to mitigate their effects and extend the shelf-life of the coconut candy.