Multifunctional modification of linen fabric using chitosan-based formulations

Enhancing plant fiber antibacterial and antiviral performance through synergistic action of amino and sulfonic acid groups

As the most abundant renewable resource, cellulose fibers are potential candidates for use in health-protective clothing. Herein, we demonstrate a novel strategy for preparing cellulose fiber with prominent antibacterial and antiviral performance by the synergistic effect of amino groups and sulfonic acid groups. Specifically, guanylated chitosan oligosaccharide (GCOS) and N-sulfopropyl chitosan oligosaccharide (SCOS) were synthesized and chemically grafted onto cellulose fibers (CFs) to endow the fibers with antibacterial and antiviral properties. Moreover, a compounding strategy was applied to make the fibers with simultaneously high antibacterial and antiviral activity, especially in short contact time. The bacteriostatic rate (against S. aureus: 95.81 %, against E. coli: 92.07 %, 1 h) of the compounded fibers improved substantially when a few GCOS-CFs were mixed with SCOS-CFs; especially, it was much higher than both the individual GCOS-CFs and SCOS-CFs. By contrast, the improvement of the antiviral properties was less dramatic; however, even a few SCOS-CFs was mixed, the antiviral properties increased pronouncedly. Although the electrostatic interaction between SCOS and GCOS can make the SCOS-GCOS mixture lose some extent of antibacterial activity, the long chains of cellulose restrain the electrostatic interaction between sulfonic and amino groups, leading to their synergistic action and eventually superior antibacterial and antiviral effects.

Sequential removal of phosphate and copper(II) ions using sustainable chitosan biosorbent

Although adsorbents are good candidates for removing phosphorus and heavy metals from wastewater, the use of biosorbents for the sequential treatment of phosphorus and copper has not yet been studied. Porous chitosan (CS)-based biosorbents (CGBs) were developed to adsorb phytic acid (PA), a major form of organic phosphate. This first adsorbate (PA) further served as an additional ligand (P-type ligand) for the CGBs (N-type ligand) to form a complex with the second adsorbate (copper). After the adsorption of PA (the first adsorbate), the spent CGBs were recycled and used as a new adsorbent to adsorb Cu(II) ions (the second adsorbate), which was expected to have a dual coordination effect through P, N-ligand complexation with copper. The interactions and complexation between CS, PA and Cu(II) ions on the PA-adsorbed CGBs (PACGBs) were investigated by performing FTIR, XPS, XRD, and SEM-EDS analyses. The PACGBs exhibited fast and enhanced adsorption of Cu(II) ions, owing to the synergistic effect of the amino groups of CS (the original ligand, N-type) and the phosphate groups of PA (an additional ligand, P-type) on the adsorption of Cu(II) ions. This is the first time that sequential removal of phosphorus and heavy metals by biosorbents has been performed using biosorbents.

Highly Stretchable, Ultra-Sensitive, and Self-Healable Multifunctional Flexible Conductive Hydrogel Sensor for Motion Detection and Information Transmission

Self-healable flexible sensing materials are extensively investigated for their potential use in human motion detection, healthcare monitoring, and other fields. However, the existing self-healable flexible sensing materials have limited their application in real life due to the weak stability of the conductive network and the difficulty in balancing stretchability and self-healing performances. In this paper, a flexible sensor with skin-like properties was prepared by composing a polymer composite hydrogel with a multiple network structure consisting of polyaniline, polyvinyl alcohol, chitosan, and phytic acid. The composite hydrogel was tested and proved to own high mechanical properties (stretchability ≈ 565%, strength ≈ 1.4 MPa), good electrical conductivity (0.214 S cm^-1), excellent self-healing properties (>99% healing efficiency in a 4 h healing period), and antibacterial properties. It had high sensitivity and a wide sensing range for strain and pressure, making it possible to manufacture multifunctional flexible sensors with comprehensive performance exceeding that of most flexible sensing materials. Notably, this polymer composite hydrogel can be manufactured in a large area and at a low cost, which is beneficial for its further application in many fields.

Totally-green cellulosic fiber with prominent sustained antibacterial and antiviral properties for potential use in spunlaced non-woven fabric production

The worldwide spread of COVID-19 has put a higher requirement for personal medical protective clothing, developing protective clothing with sustained antibacterial and antiviral performance is the priority for safe and sustaining application. For this purpose, we develop a novel cellulose based material with sustained antibacterial and antiviral properties. In the proposed method, the chitosan oligosaccharide (COS) was subjected to a guanylation reaction with dicyandiamide in the presence of Scandium (III) triflate; because of the relatively lower molecular weight and water solubility of the COS, GCOS (guanylated chitosan oligosaccharide) with high substitution degree (DS) could be successfully synthetized without acid application. In this instance, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the GCOS were only 1/8 and 1/4 of that of COS. The introduction of GCOS onto the fiber endowed the fiber with extremely high antibacterial and antiviral performance, showing 100% bacteriostatic rate against Staphylococcus aureus and Escherichia coli and 99.48% virus load reduction of bacteriophage MS2. More importantly, the GCOS modified cellulosic fibers (GCOS-CFs) exhibit excellent sustained antibacterial and antiviral properties; namely, 30 washing cycles had negligible effect on the bacteriostatic rate (100%) and inhibition rate of bacteriophage MS2 (99.0%). Moreover, the paper prepared from the GCOS-CFs still exhibited prominent antibacterial and antiviral activity; inferring that the sheeting forming, press, and drying process have almost no effect on the antibacterial and antiviral performances. The insensitive of antibacterial and antiviral activity to water washing (spunlace) and heat (drying) make the GCOS-CFs a potential material applicable in the spunlaced non-woven fabric production.

Antibacterial and antiviral chitosan oligosaccharide modified cellulosic fibers with durability against washing and long-acting activity

The worldwide outbreak of SARS-CoV-2 has attracted extensive attention to antibacterial and antivirus materials. Cellulose is the most potential candidate for the preparation of green, environmentally friendly antibacterial and antiviral materials. Herein, modified cellulosic fibers with sustained antibacterial and antiviral performance was prepared by introducing chitosan oligosaccharide onto the fibers. The two-step method is proved to be more effective than the one-step method for enhanced chitosan oligosaccharide loadings and antibacterial and antiviral activity. In this instance, the modified fibers with 61.77 mg/g chitosan oligosaccharide loadings can inhibit Staphylococcus aureus and Escherichia coli by 100 % after contacting with bacteria for 12 h and reduce the bacteriophage MS2 by 99.19 % after 1 h of contact. More importantly, the modified fibers have washing durable antibacterial and antiviral activity; the modified fibers have 100 % antibacterial and 98.38 % antiviral activity after 20 washing cycles. Benefiting from the excellent performance of the individual fibers, the paper prepared from the modified fibers show great antibacterial (100 %) and antiviral performance (99.01 %) and comparable mechanical strength. The modified fibers have potential applications in the manufacture of protective clothing and protective hygiene products.

Chitosan Nanoparticles as Bioactive Vehicles for Textile Dyeing: A Proof of Concept

In recent years bioactive textiles have risen to the forefront of consumers perception due to their potential protection against virus, fungi and bacteria. However, traditional textile staining is an eco-damaging process that and current methods of textile functionalization are expensive, complicated and with great environmental impact. With that in mind, this work sought to show a possible solution for this problematic through the usage of a novel one step textile dyeing and functionalization method based upon nanoencapsulated textile dyes (NTDs). To do so navy blue everzol NTDs were produced with chitosan, cotton dyed, characterized through FTIR and SEM and biological potential evaluated through biocompatibility screening and antimicrobial activity against skin pathogens. The data obtained showed that NTDs effectively dyed the target textile through a coating of the cotton fibre and that NTDs formed hydrogen bonds with the cellulose fibre via electrostatic interactions of the chitosan amino groups with cotton sulphate groups. From a biocompatibility perspective NTDs dyed cotton had no deleterious effects upon a skin cell line, as it promoted cellular metabolism of HaCat cells, while traditionally died cotton reduced it by 10%. Last but not least, NTDs dyed cotton showed significant antimicrobial activity as it reduced viable counts of MRSA, MSSA and A. baumannii between 1 and 2 log of CFU while traditional dyed cotton had no antimicrobial activity. Considering these results the novel method proposed shows is a viable and ecological alternative for the development of antimicrobial textiles with potential biomedical applications.

Hydrothermal Synthesis of Chitosan and Tea Tree Oil on Plain and Satin Weave Cotton Fabrics

The paper aimed at enhancing the antimicrobial activity of chitosan by using tea tree essential oil with the purpose of durably finishing cotton fabrics for use in a hospital environment. The influence of crosslinkers and catalysts on the possibility of obtaining stable bonds using hydrothermal in situ synthesis between cellulosic material and chitosan with and without tea tree essential oil was investigated in detail. The morphology of the sample surface before and after the treatment and textile care cycle was investigated using a field emission scanning electron microscopy (FE-SEM) and indicated the presence of chitosan and a thin film on all treated samples, which showed durability of the treatment. The FTIR spectra obtained by Fourier transform infrared spectroscopy (FTIR) using attenuated total reflection measurement technique (ATR) analysis, showed that all the samples tested recorded physicochemical changes in the structure. The analysis of the samples on the goniometer proved the hydrophilicity of the materials, with a film forming on the surface of the treated samples, which is extremely beneficial given the end use of dressing samples to promote wound healing. The presence of a significant amount of bound chitosan with tea tree oil was confirmed by measuring the mass per unit area of the samples after the treatment and textile care cycles. The results of antimicrobial efficacy show that the materials treated with chitosan were resistant to bacteria and fungi in most cases, but only the samples treated in Bath I showed a zone of inhibition against the fungus Candida albicans, indicating the positive effect of tea tree essential oil.

Forensic Analysis of Textile Synthetic Fibers Using a FT-IR Spectroscopy Approach

Synthetic fibers are one of the most valuable trace lines of evidence that can be found in crime scenes. When textile fibers are analyzed properly, they can help in finding a linkage between suspect, victim, and the scene of the crime. Various analytical techniques are used in the examination of samples to determine relationships between different fabric fragments. In this exploratory study, multivariate statistical methods were investigated in combination with machine learning classification models as a method for classifying 138 synthetic textile fibers using Fourier transform infrared spectroscopy, FT-IR. The data were first subjected to preprocessing techniques including the Savitzky–Golay first derivative method and Standard Normal Variate (SNV) method to smooth the spectra and minimize the scattering effects. Principal Component Analysis (PCA) was built to observe unique patterns and to cluster the samples. The classification model in this study, Soft Independent Modeling by Class Analogy (SIMCA), showed correct classification and separation distances between the analyzed synthetic fiber types. At a significance level of 5%, 97.1% of test samples were correctly classified.

Flame Retardant Functionalization of Microcrystalline Cellulose by Phosphorylation Reaction with Phytic Acid

The functionalization of microcrystalline cellulose (MCC) is an important strategy for broadening its application fields. In the present work, MCC was functionalized by phosphorylation reaction with phytic acid (PA) for enhanced flame retardancy. The conditions of phosphorylation reaction including PA concentration, MCC/PA weight ratio and temperature were discussed, and the thermal degradation, heat release and char-forming properties of the resulting PA modified MCC were studied by thermogravimetric analysis and pyrolysis combustion flow calorimetry. The PA modified MCC, which was prepared at 90 °C, 50%PA and 1:3 weight ratio of MCC to PA, exhibited early thermal dehydration with rapid char formation as well as low heat release capability. This work suggests a novel strategy for the phosphorylation of cellulose using PA and reveals that the PA phosphorylated MCC can act as a promising flame retardant material.

Multifunctional Finishing of Cotton with Compounds Derived from MCT-β-CD and Quantification of Effects Using MLR Statistical Analysis

Multifunctionalization of cotton using a single product has not been made until now. Such a product was synthesized using compounds with multiple functions (glyoxal, ethylenediamine (ED) and monochlorotriazinyl-β–cyclodextrin (MCT-β-CD)), under different mass ratios. Obtaining this multifunctional derivative has been confirmed by spectroscopic analyses (¹H-NMR and FTIR) and a scanning electron microscope (SEM). Treatment of cotton with the MCT-β-CD derivative (D-CD) has been realized with the pad dry-cure technology. The presence of this multifunctional derivative on cotton was highlighted with spectroscopic (FTIR, EDAX, XRD) and thermoanalytical (DSC) methods. The objective of treating cotton with D-CD was to achieve four simultaneous effects: large wrinkle recovery angle (WRA), hydrophilicity, antibacterial capacity and a good breaking resistance. This objective has been achieved, so the garments that will be manufactured with such multifunctional cotton will be more comfortable. The efficiency of treatments with D-CD was marked out by multiple linear regression (MLR) and certain quality indices. Using MLR, the behavior of the treated cotton was mathematically modeled and the stationary/optimal points corresponding to each effect were calculated. Quality indices have been calculated and all final samples had values higher than 1, which confirmed the positive effects exerted by D-CDs on cotton.

Flame-Retardant Systems Based on Chitosan and Its Derivatives: State of the Art and Perspectives

During the last decade, the utilization of chitin, and in par0ticular its deacetylated form, i.e., chitosan, for flame retardant purposes, has represented quite a novel and interesting application, very far from the established uses of this bio-sourced material. In this context, chitosan is a carbon source that can be successfully exploited, often in combination with intumescent products, in order to provide different polymer systems (namely, bulky materials, fabrics and foams) with high flame retardant (FR) features. Besides, this specific use of chitosan in flame retardance is well suited to a green and sustainable approach. This review aims to summarize the recent advances concerning the utilization of chitosan as a key component in the design of efficient flame retardant systems for different polymeric materials.

Multifunctional modification of cotton using layer-by-layer finishing with chitosan, sodium lignin sulphonate and boric acid

Functionally modified fabrics produced using sustainable techniques are in huge demand in today's world. In the present work, cotton fabric was modified using layer-by-layer two-stage finishing method using a solution of chitosan in citric acid (CS) and sodium lignin sulphonate (SLS) with boric acid (BA), thus granting several performance traits like wrinkle-free, antibacterial, flame retardant, UV protection and antioxidant properties. The finished fabric was evaluated for several textile properties like tensile strength, bending length, crease recovery, whiteness index and functional properties like antibacterial activity, UV protection, flame retardancy and antioxidant properties under standard conditions. The finished cotton showed an increase in CRA, antibacterial activity in the range 70-89%, UPF in the excellent range, much higher LOI values with a decrease in heat release and antioxidant activity of higher than 93%. The novel method of multifunctional finishing of cotton by layer-by-layer technique is explored.

Functionalization of wool fabric using lignin biomolecules extracted from groundnut shells

Food and agro-processing industries generate a huge quantity of solid waste which is rich in bio-macromolecules like lignin. The extraction of lignin biomolecules can help in the efficient management of such waste along with the generation of wealth from the waste. The groundnut shells are one of the lignin-rich wastes which could be utilized for the extraction of lignin biomolecules. The present work investigates an innovative approach involving the application of extracted lignin biomolecules for the value-addition to wool fabrics. Metallic mordants were utilized to get a wash-fast attachment of lignin with wool. The change in the appearance of wool fabrics was analyzed using reflectance spectroscopy. The finished fabrics were further evaluated for the functional properties like antioxidant activity, antibacterial activity and UV protection. The functionalized wool fabrics displayed a variety of shades with different combinations of groundnut shell lignin (GSL) and mordant. Thermal stability of treated wool fabrics was analyzed by thermogravimetric analysis. The functionalized wool fabrics showed significant antioxidant activity (69.5-84.5%), antibacterial activity (79.7-86.3%) and UV protection (UPF ratings of 50⁺).

Recent advances in chitosan polysaccharide and its derivatives in antimicrobial modification of textile materials

Chitosan is partially or completely N-deacetylated derivative of chitin and is chemically composed of β‑(1, 4) linked 2‑amino‑2‑deoxy‑β‑d‑glucopyranose. Biocompatibility, non-toxicity, antifungal activity, water-binding capacity, bioactivity and antimicrobial properties make chitosan particularly attractive substitute for synthetic polymers in different application fields and notably in the textile industry. The presence of reactive amino and hydroxyl groups along the backbone conifer chitosan some interesting properties for use in textile dyeing and finishing. However, the main barrier to the use of chitosan is the lack of water solubility at neutral pH and poor durability on textile surfaces. To overcome this, chitosan has been chemically modified in several ways to obtain a wide range of important derivatives with a broad range of applications. This review is intended to provide a recent overview of chitosan and its derivatives and highlight their role in the development of antimicrobial textiles.