Accelerated skin wound healing by soy protein isolate-modified hydroxypropyl chitosan composite films

Fabrication and Evaluation of a Soy Protein Isolate/Collagen/Sodium Alginate Multifunctional Bilayered Wound Dressing: Release of Cinnamaldehyde, Artemisia absinthium, and Oxygen

Chronic wounds, such as diabetic ulcers and pressure sores, pose significant challenges in modern healthcare due to their prolonged healing times and susceptibility to infections. This study aims to engineer a bilayered wound dressing (BLWD) composed of soy protein isolate/collagen with the ability to release Cinnamaldehyde, Artemisia absinthium (AA), and oxygen. Cinnamaldehyde, magnesium peroxide (MgO2), and AA extract were encapsulated. Nanoparticles were evaluated using scanning electron microscopy (SEM), dynamic light scattering, and ZETA potential tests. Swelling, degradation, water vapor penetration, tensile, MTT, SEM, oxygen release, AA extract release, and antibacterial properties were performed. An in vivo study was carried out to assess the final wound dressing under Hematoxiline&Eosin and Masson trichrome staining analysis and compared to a commercial product. According to the results, the synthesized nanoparticles had an average diameter of about 20 nm with a zeta potential in the range of -20 to -30 mV. The layers had uniform and dense surfaces. The maximum swelling and degradation of the dressing was about 130 and 13% respectively. Generally, better mechanical properties were observed in BLWD than in the single-layer case. More than 90% biocompatibility for the wound dressing was reported. The BLWD could inhibit the growth of Gram-positive and Gram-negative microorganisms. Histopathological analysis showed an acceptable wound-healing property. To sum up, the engineered wound dressing can be a good candidate for more clinical trials.

Modified chitosan: Insight on biomedical and industrial applications

Chitosan (CS), a by -product of chitin deacetylation can be useful in a broad range of purposes, to mention agriculture, pharmaceuticals, material science, food and nutrition, biotechnology and of recent, in gene therapy. Chitosan is a highly desired biomolecule due to the existence of many sensitive functional groups inside the molecule and also because of its net cationicity. The latter provides flexibility for creating a wide range of derivatives for particular end users across various industries. This overview aims to compile some of the most recent research on the bio-related applications that chitosan and its derivatives can be used for. However, chitosan's reactive functional groups are amendable to chemical reaction. Modifying the material to show enhanced solubility, a greater range of application options and pH-sensitive targeting and others have been a major focus of chitosan research. This review describes the modifications of chitosan that have been made to improve its water solubility, pH sensitivity, and capacity to target chitosan derivatives. Applying the by-products of chitosan as antibacterial, in targeting, extended release and as delivery systems is also covered. The by-products of chitosan will be important and potentially useful in developing new biomedical drugs in time to come.

Soy Protein-Based Wound Dressings: A Review of Their Preparation, Properties, and Perspectives

Wound healing is a major challenge worldwide, and people have been researching wound dressings that can promote wound healing for decades. Natural biobased materials, such as polysaccharides and proteins, have been widely used in the development of wound dressings. Among them, soy protein-based materials have attracted the interest of a wide range of researchers due to their safety, biocompatibility, controlled degradation, and ability to be mixed with other materials. However, there has been a lack of comments on these soy protein-based wound dressings. This work reviews various forms of soy protein-based wound dressings, such as hydrogels, films, and others, which could be prepared through physical/chemical cross-linking with synthetic or natural polymers. The important role played by soy protein-based materials in the wound healing phase and their properties will be examined, such as their anti-inflammatory, antioxidant, angiogenesis-promoting, cellular biocompatibility, self-healing ability, adhesion, antimicrobial, and tunable mechanical properties. Additionally, insights into the market prospects and trends for soy protein dressings are provided, clarifying the enormous development potential of soy protein as a new type of wound repair material.

Collagen fibril-like injectable hydrogels from self-assembled nanoparticles for promoting wound healing

Soft hydrogels are excellent candidate materials for repairing various tissue defects, yet the mechanical strength, anti-swelling properties, and biocompatibility of many soft hydrogels need to be improved. Herein, inspired by the nanostructure of collagen fibrils, we developed a strategy toward achieving a soft but tough, anti-swelling nanofibrillar hydrogel by combining the self-assembly and chemical crosslinking of nanoparticles. Specifically, the collagen fibril-like injectable hydrogel was subtly designed and fabricated by self-assembling methylacrylyl hydroxypropyl chitosan (HM) with laponite (LAP) to form nanoparticles, followed by the inter-nanoparticle bonding through photo-crosslinking. The assembly mechanism of nanoparticles was elucidated by both experimental and simulation techniques. Due to the unique structure of the crosslinked nanoparticles, the nanocomposite hydrogels exhibited low stiffness (G'< 2 kPa), high compressive strength (709 kPa), and anti-swelling (swelling ratio of 1.07 in PBS) properties. Additionally, by harnessing the photo-crosslinking ability of the nanoparticles, the nanocomposite hydrogels were processed as microgels, which can be three-dimensionally (3D) printed into complex shapes. Furthermore, we demonstrated that these nanocomposite hydrogels are highly biocompatible, biodegradability, and can effectively promote fibroblast migration and accelerate blood vessel formation during wound healing. This work presents a promising approach to develop biomimetic, nanofibrillar soft hydrogels for regenerative medicine applications.

In Situ Synthesis of Gold Nanoparticles from Chitin Nanogels and Their Drug Release Response to Stimulation

In this study, gold nanoparticles (AuNPs) were synthesized in situ using chitin nanogels (CNGs) as templates to prepare composites (CNGs@AuNPs) with good photothermal properties, wherein their drug release properties in response to stimulation by near-infrared (NIR) light were investigated. AuNPs with particle sizes ranging from 2.5 nm to 90 nm were prepared by varying the reaction temperature and chloroauric acid concentration. The photothermal effect of different materials was probed by near-infrared light. Under 1 mg/mL of chloroauric acid at 120 °C, the prepared CNGs@AuNPs could increase the temperature by 32 °C within 10 min at a power of 2 W/cm2. The Adriamycin hydrochloride (DOX) was loaded into the CNGs@AuNPs to investigate their release behaviors under different pH values, temperatures, and near-infrared light stimulations. The results showed that CNGs@AuNPs were pH- and temperature-responsive, suggesting that low pH and high temperature could promote drug release. In addition, NIR light stimulation accelerated the drug release. Cellular experiments confirmed the synergistic effect of DOX-loaded CNGs@AuNPs on chemotherapy and photothermal therapy under NIR radiation.

A double-layer cellulose/pectin-soy protein isolate-pomegranate peel extract micro/nanofiber dressing for acceleration of wound healing

Multi-layered wound dressings can closely mimic the hierarchical structure of the skin. Herein, a double-layer dressing material is fabricated through electrospinning, comprised of a nanofibrous structure as a healing-support layer or the bottom layer (BL) containing pectin (Pec), soy protein isolate (SPI), pomegranate peel extract (P), and a cellulose (Cel) microfiber layer as a protective/monitoring layer or top layer (TL). The formation of a fine bilayer structure was confirmed using scanning electron microscopy. Cel/Pec-SPI-P dressing showed a 60.05 % weight loss during 7 days of immersion in phosphate buffered solution. The ultimate tensile strength, elastic modulus, and elongation at break for different dressings were within the range of 3.14-3.57 MPa, 32.26-36.58 MPa, and 59.04-63.19 %, respectively. The release of SPI and phenolic compounds from dressings were measured and their antibacterial activity was evaluated. The fabricated dressing was non-cytotoxic following exposure to human keratinocyte cells. The Cel/Pec-SPI-P dressing exhibited excellent cell adhesion and migration as well as angiogenesis. More importantly, in vivo experiments on Cel/Pec-SPI-P dressings showed faster epidermal layer formation, blood vessel generation, collagen deposition, and a faster wound healing rate. Overall, it is anticipated that the Cel/Pec-SPI-P bilayer dressing facilitates wound treatment and can be a promising approach for clinical use.

Superporous soy protein isolate matrices as superabsorbent dressings for successful management of highly exuding wounds: In vitro and in vivo characterization

Soy protein isolate (SPI) has received widespread attention of the biomedical research community primarily due to its good biocompatibility, biodegradability, high availability and low cost. Herein, glutaraldehyde cross-linked microporous sponge-like SPI scaffolds were prepared using the cryogelation technique for tissue engineering applications. The prepared SPI scaffolds possess an interconnected porous structure with approximately 90% porosity and an average pore size in the range of 45-92 μm. The morphology, porosity, swelling capacity and degradation rate of the cryogels were found to be dependent on the concentration of polymer to crosslinking agent. All cryogels were found to be elastic and able to maintain physical integrity even after being compressed to one-fifth of their original length during cyclic compression analysis. These cryogels showed excellent mechanical properties, immediate water-triggered shape restoration and absorption speed. Furthermore, cryogels outperformed cotton and gauze in terms of blood clotting and blood cell adherence. The in vitro and in vivo studies demonstrated the potency of SPI scaffolds for skin tissue engineering applications. Our findings showed that crosslinking with glutaraldehyde had no detrimental effects on cell viability. In addition, an in vivo wound healing study in rats validated them as good potential wound dressing materials.

All natural mussel-inspired bioadhesives from soy proteins and plant derived polyphenols with marked water-resistance and favourable antibacterial profile for wound treatment applications

HYPOTHESIS

Implementation of tissue adhesives from natural sources endowed with good mechanical properties and underwater resistance still represents a challenging research goal. Inspired by the extraordinary wet adhesion properties of mussel byssus proteins resulting from interaction of catechol and amino residues, hydrogels from soy protein isolate (SPI) and selected polyphenols i.e. caffeic acid (CA), chlorogenic acid (CGA) and gallic acid (GA) under mild aerial oxidative conditions were prepared.

EXPERIMENTS

The hydrogels were subjected to chemical assays, ATR FT-IR and EPR spectroscopy, rheological and morphological SEM analysis. Mechanical tests were carried out on hydrogels prepared by inclusion of agarose. Biological tests included evaluation of the antibacterial and wound healing activity, and hemocompatibility.

FINDINGS

The decrease of free NH2 and SH groups of SPI, the EPR features, the good cohesive strength and excellent underwater resistance (15 days for SPI/GA) under conditions relevant to their use as surgical glues indicated an efficient interaction of the polyphenols with the protein in the hydrogels. The polyphenols greatly also improved the mechanical properties of the SPI/ agarose/polyphenols hydrogels. These latter proved biocompatible, hemocompatible, not harmful to skin, displayed durable adhesiveness and good water-vapour permeability. Excellent antibacterial properties and in some cases (SPI/CGA) a favourable wound healing activity on dermal fibroblasts was obtained.

All-in-one bioactive properties of photothermal nanofibers for accelerating diabetic wound healing

Diabetic wound healing has attracted widespread attention in biomedical engineering. However, the harsh hypoxic microenvironment (HME) comprising high glucose levels, local bleeding, and bacterial infection often leads to the formation of hyperplastic scars, increasing the clinical demand for wound dressings. Here, we report a comprehensive strategy using near-infrared NIR-assisted oxygen delivery combined with the bioactive nature of biopolymers for remodeling the HME. Black phosphorus (BP) nanosheets and hemoglobin (Hb) were self-assembled layerwise onto electrospun poly-l-lactide (PLLA) nanofibers using charged quaternized chitosan (QCS) and hyaluronic acid. BP converts NIR radiation into heat and stimulates Hb to release oxygen in situ. QCS is a hemostatic and broad-spectrum antibacterial material. Moderate BP-derived photothermal therapy can increase the sensitivity of bacteria to QCS. A series of composite wound dressings (coded as PQBH-n) with different numbers of layers were fabricated, and the in vivo diabetic wound healing potentials were tested. The molecular mechanism can be partly attributed to the cytokine-cytokine receptor interaction. Notably, this comprehensive strategy based on NIR-assisted oxygen delivery combined with the bioactive properties of biopolymers is not only applicable for fabricating multifunctional wound dressings but also has a great potential in expanding biomedical engineering fields.

Electrodeposition of chitosan/graphene oxide conduit to enhance peripheral nerve regeneration

Currently available commercial nerve guidance conduits have been applied in the repair of peripheral nerve defects. However, a conduit exhibiting good biocompatibility remains to be developed. In this work, a series of chitosan/graphene oxide (GO) films with concentrations of GO varying from 0–1 wt% (collectively referred to as CHGF-n) were prepared by an electrodeposition technique. The effects of CHGF-n on proliferation and adhesion abilities of Schwann cells were evaluated. The results showed that Schwann cells exhibited elongated spindle shapes and upregulated expression of nerve regeneration-related factors such as Krox20 (a key myelination factor), Zeb2 (essential for Schwann cell differentiation, myelination, and nerve repair), and transforming growth factor β (a cytokine with regenerative functions). In addition, a nerve guidance conduit with a GO content of 0.25% (CHGFC-0.25) was implanted to repair a 10-mm sciatic nerve defect in rats. The results indicated improvements in sciatic functional index, electrophysiology, and sciatic nerve and gastrocnemius muscle histology compared with the CHGFC-0 group, and similar outcomes to the autograft group. In conclusion, we provide a candidate method for the repair of peripheral nerve defects using free-standing chitosan/GO nerve conduits produced by electrodeposition.

Optimization and characterization of a novel tea tree oil-integrated poly (ε-caprolactone)/soy protein isolate electrospun mat as a wound care system

A set of poly (ε-caprolactone)/soy protein isolate (PCL/SPI) mats with different ratios of PCL to SPI was fabricated using the electrospinning method. The mat with PCL to SPI ratio of 95:5 (PS 95:5) had the narrowest nanofibers, the highest percentage of porosity, the lowest swelling ratio, the least vapor transmission, and the slowest degradation rate among the prepared mats. The hemolysis assay indicated that all mats can be considered biocompatible biomaterials. In continue, three different weight ratios of tea tree oil (TTO) were loaded into the PS 95:5 mat. The release profiles illustrated that higher amounts of TTO could be released in an acidic environment. The antioxidant activity of the mats increased by the increase in their TTO content. The cell viability test, cell adhesion images, and live/dead assay of TTO-loaded mats affirmed that all fabricated mats were biocompatible. The scratch wound assay expressed that TTO accelerates the rate of wound closure. The TTO-loaded mats illustrated antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria. The obtained outcomes revealed that TTO-loaded PCL/SPI mats can be considered promising potential wound dressings.

Progress in Research of Chitosan Chemical Modification Technologies and Their Applications

Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.

Bacterial cellulose/soybean protein isolate composites with promoted inflammation inhibition, angiogenesis and hair follicle regeneration for wound healing

Soybean protein, as a safe and low-cost alternative to animal protein, attracts increasing attention in wound healing. In the present study, beta-conglycinin (7S) and glycinin (11S) with high solubility were obtained through separation of soybean protein. Afterward, 7S or 11S modified bacterial cellulose (BC) composites were produced by self-assembly method. Results confirmed the successful self-assembly of soybean protein isolates on the nanofibers of BC. The surface roughness and hydrophilicity of BC/7S and BC/11S decreased compared with native BC. Soybean protein could be steadily released from BC/7S and BC/11S and BC/11S released more soybean proteins than BC/7S. In vitro, BC/7S and BC/11S supported fibroblasts attachment and promoted fibroblasts proliferation and type I collagen expression. In vivo, BC/7S and BC/11S facilitated wound healing and collagen deposition, enhanced angiogenesis and hair follicle regeneration, as well as reduced scar formation and inflammation in full-thickness skin wounds of rats. Moreover, wounds treated with BC/11S showed a faster wound healing rate and more collagen depositions than those of BC/7S, which may be attributed to the larger considerable amount of soybean protein released by BC/11S. These results indicate that BC/7S and BC/11S are potential candidates for wound dressings.

Antibacterial peptide NZ2114-loaded hydrogel accelerates Staphylococcus aureus-infected wound healing

Wound infection caused by Staphylococcus aureus (S. aureus) is a great challenge which has caused significant burden and economic loss to the medical system. NZ2114, a plectasin-derived peptide, is an antibacterial agent for preventing and treating S. aureus infection, especially for methicillin-resistant S. aureus (MRSA) infection. Here, three-dimensional reticulated antimicrobial peptide (AMP) NZ2114 hydrogels were developed based on hydroxypropyl cellulose (HPC) and sodium alginate (SA); they displayed sustained and stable release properties (97.88 ± 1.79% and 91.1 ± 10.52% release rate in 72 h, respectively) and good short-term cytocompatibility and hemocompatibility. But the HPC-NZ2114 hydrogel had a smaller pore size (diameter 0.832 ± 0.420 μm vs. 3.912 ± 2.881 μm) and better mechanical properties than that of the SA-NZ2114 hydrogel. HPC/SA-NZ2114 hydrogels possess efficient antimicrobial activity in vitro and in vivo. In a full-thickness skin defect model, the wound closure of the 1.024 mg/g HPC-NZ2114 hydrogel group was superior to those of the SA-NZ2114 hydrogel and antibiotic groups on day 7. The HPC-NZ2114 hydrogel accelerated wound healing by reducing inflammation and promoting the production of vascular endothelial growth factor (VEGF), endothelial growth factor (EGF) and angiogenesis (CD31) through histological and immunohistochemistry evaluation. These data indicated that the HPC-NZ2114 hydrogel is an excellent candidate for S. aureus infection wound dressing. KEY POINTS: •NZ2114 hydrogels showed potential in vitro bactericidal activity against S. aureus •NZ2114 hydrogels could release continuously for 72 h and had good biocompatibility •NZ2114 hydrogels could effectively promote S. aureus-infected wound healing.

Green Polymer Nanocomposites for Skin Tissue Engineering

Fabrication of an appropriate skin scaffold needs to meet several standards related to the mechanical and biological properties. Fully natural/green scaffolds with acceptable biodegradability, biocompatibility, and physiological properties quite often suffer from poor mechanical properties. Therefore, for appropriate skin tissue engineering and to mimic the real functions, we need to use synthetic polymers and/or additives as complements to green polymers. Green nanocomposites (either nanoscale natural macromolecules or biopolymers containing nanoparticles) are a class of scaffolds with acceptable biomedical properties window (drug delivery and cardiac, nerve, bone, cartilage as well as skin tissue engineering), enabling one to achieve the required level of skin regeneration and wound healing. In this review, we have collected, summarized, screened, analyzed, and interpreted the properties of green nanocomposites used in skin tissue engineering and wound dressing. We particularly emphasize the mechanical and biological properties that skin cells need to meet when seeded on the scaffold. In this regard, the latest state of the art studies directed at fabrication of skin tissue and bionanocomposites as well as their mechanistic features are discussed, whereas some unspoken complexities and challenges for future developments are highlighted.

In vivo study of the efficacy of bupivacaine-eluting novel soy protein wound dressings in a rat burn model

Dealing with wound related pain is an integral part of treatment. Systemic administration of analgesic and anesthetic agents is a common solution for providing pain relief to patients but comes at a risk of severe side effects as well as addiction. To overcome these issues, research efforts were madeto provide a platform for local controlled release of pain killers. We have developed a bilayer soy protein-based wound dressing for the controlled local release of bupivacaine to the wound site. The combination of a dense and a porous layer provides a platform for cell growth and proliferation as well as physical protection to the wound site. The current study focuses on the in vitro bupivacaine release profile from the dressing and the corresponding in vivo results of pain levels in a second-degree burn model on rats. The Rat Grimace Scale method and the Von Frey filaments method were used to quantify both, spontaneous pain and mechanically induced pain. A high burst release of 61.8 ± 1.9% of the loaded drug was obtained during the initial hour, followed by a slower release rate during the following day. The animal trials show that the RGS scores of the bupivacaine-treated group were significantly lower than these of the untreated group, proving a decrease of 51-68% in pain levels during days 1-3 after burn. Hence, successful pain reduction of spontaneous pain as well as mechanically induced pain, for at least three days after burn was achieved. It is concluded that our novel bupivacaine eluting soy protein wound dressings are a promising new concept in the field of local controlled drug release for pain management.

Protein materials as sustainable non- and minimally invasive strategies for biomedical applications

Protein-based materials have found applications in a wide range of biomedical fields because of their biocompatibility, biodegradability and great versatility. Materials of different physical forms including particles, hydrogels, films, fibers and microneedles have been fabricated e.g. as carriers for drug delivery, factors to promote wound healing and as structural support for the generation of new tissue. This review aims at providing an overview of the current scientific knowledge on protein-based materials, and selected preclinical and clinical studies will be reviewed in depth as examples of the latest progress within the field of protein-based materials, specifically focusing on non- and minimally invasive strategies mainly for topical application.

Biobased composites from agro-industrial wastes and by-products

The greater awareness of non-renewable natural resources preservation needs has led to the development of more ecological high-performance polymeric materials with new functionalities. In this regard, biobased composites are considered interesting options, especially those obtained from agro-industrial wastes and by-products. These are low-cost raw materials derived from renewable sources, which are mostly biodegradable and would otherwise typically be discarded. In this review, recent and innovative academic studies on composites obtained from biopolymers, natural fillers and active agents, as well as green-synthesized nanoparticles are presented. An in-depth discussion of biobased composites structures, properties, manufacture, and life-cycle assessment (LCA) is provided along with a wide up-to-date overview of the most recent works in the field with appropriate references. Potential uses of biobased composites from agri-food residues such as active and intelligent food packaging, agricultural inputs, tissue engineering, among others are described, considering that the specific characteristics of these materials should match the proposed application.

Preparation, characterization, and antibiofilm activity of cinnamic acid conjugated hydroxypropyl chitosan derivatives

In this study, cinnamic acid (CA) conjugated hydroxypropyl chitosan (HPCS) derivatives (HPCS-CA) with different degrees of substitution (DS) were successfully synthesized. The reaction was divided into two steps: the first step was to modify chitosan (CS) to HPCS, and the second step was to graft CA onto HPCS. Structural characterization and properties were carried out employing elemental analysis, Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, nuclear magnetic resonance (NMR) spectra, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The solubility test revealed the better water solubility of derivatives than CS. In addition, in vitro antibacterial and antibiofilm tests were performed. As expected, HPCS-CA derivatives exhibited good antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The MIC and MBC of HPCS-CA derivatives could reach 256 μg/mL and 512 μg/mL, respectively. Confocal laser scanning microscopy (CLSM) analysis proved the inhibitory effect of HPCS-CA derivatives on S. aureus and E. coli biofilms by disrupting the formation of biofilms, reducing the thickness of biofilms, and the number of live bacteria. These results suggest the potential applicability of HPCS-CA derivatives in the treatment of biofilm-associated infections and provide a practical strategy for the design of novel CS-based antibacterial materials.

Facile fabrication of soy protein isolate-functionalized nanofibers with enhanced biocompatibility and hemostatic effect on full-thickness skin injury

Extensive full-thickness skin defect lacks self-healing ability. Tissue engineering wound dressing is considered as the most promising approach to promote wound healing. In this study, a series of biocompatible and hemostatic nanofiber dressings were fabricated. Soy protein isolate (SPI) and poly(L-lactic acid) (PLLA) solutions were mixed in certain proportions for high-voltage electrospinning. The obtained products were coded as SPNF-n (n = 100, 80, 60 and 40, corresponding to the weight percentage of PLLA solution). We found that SPNF-n (n = 100, 80, 60 and 40) could facilitate the adhesion and spread of L929 cells. In particular, SPNF-80 was capable of promoting fibroblast proliferation and diminishing inflammation. Compared with the neat PLLA film (SPNF-100), the biosafety and hemostatic effect of SPNF-80 got significantly improved. The hemostatic effect of SPNF-80 was comparable with that of a commercial gelatin sponge. In vivo wound healing assay demonstrated that SPNF-80 could accelerate the wound healing process by enhancing vascularization, re-epithelization and collagen formation. In conclusion, our results reveal that SPNF-n has good biocompatibility and hemostatic effect, and exhibits great application potential in wound healing.

A review on chitosan-based membranes for sustainable CO2 separation applications: Mechanism, issues, and the way forward

Effective carbon dioxide (CO₂) separation by nominal energy utilization is the factual attempt in the present era of energy scarcity and environmental calamity. In this perspective, the membrane- based gas separation technology is a budding endeavour owing to its cost -effectiveness, ease of operational maintenance and compact modular design. Among various membrane materials, bio-based polymers are of interest as they are abundant and can be obtained from renewable resources, and can also reduce our dependency on exhaustible fossil fuel-based sources. In this review, the structure-property relationship of chitosan and some of its film-forming derivatives has been critically studied for the first time in view of the fundamental properties required for gas separation applications. Various factors affecting the gas permeation performance of chitosan-based membranes have been highlighted along with prospects and propositions for the design of a few novel bio-based membranes based on the exhaustive analyses.

Hydroxypropyl chitosan/soy isolate protein conduits promote peripheral nerve regeneration

Designing scaffolds, with optimized micro-structure and function for promoting the release of neuro-related factors, is significant in peripheral nerve regeneration. Herein, a series of hydroxypropyl chitosan/soy protein isolate composite sponges (HCSS) were fabricated by a freeze-drying technique. The physicochemical properties of the resultant HCSS were examined by a Fourier infrared spectrometer, X-ray diffractometer, scanning electron microscope, water absorption assay, water retention assay, and compressive strength assay. The results indicated that HCSS exhibited an interconnected porous micro-structure and a high water retention ratio with the increase in SPI content. The biological characterization found that the HCSS-50 containing 50% SPI content profoundly promoted the proliferation of RSC96 cells and the secretion of neuro-related factors without excessive ROS production. In addition, HCSS-50 could significantly promote the expression of neuro-related factors; for example, the expression of TGF-β was 3 times higher than that of the control group. Finally, an optimized HCSS-based conduit was fabricated from HCSS-50 to repair sciatic nerve injury in rats with the combination of BMSCs or BMSC-derived Schwann cells. The results suggested that the constructed HCSS-based conduit accompanying BMSC-derived Schwann cells could effectively promote axonal regeneration and upregulate expression of neuro-related factors such as Krox20, Zeb2, and GAP43. Collectively, a newly engineered nerve conduit system was developed by incorporating HCSS-50 and BMSC-derived Schwann cells, which could be an alternative candidate for peripheral nerve regeneration.

Edible Materials in Tissue Regeneration

Edible materials have attracted increasing attention because of their excellent properties including availability, biocompatibility, biological activity, and biodegradability. Natural polysaccharides, phenolic compounds, and proteins are widely used in tissue regeneration. To better characterize their healing effect, this review article describes the applications of edible materials in tissue regeneration including wound healing and bone tissue regeneration. As an introduction to the topic, their sources and main bioactive properties are discussed. Then, the mechanism by which they facilitate wound healing based on their hemostasis, antibacterial, anti-inflammatory, and antioxidant properties is systematically investigated. Moreover, a more comprehensive discussion is presented on the approaches by which edible materials can be used as scaffolds or agents for the provision of the components of natural bones for regulating the level of osteogenesis-related cytokines to enhance bone repair. Finally, the prospects of edible materials for tissue regeneration are discussed.

Chitosan grafted/cross-linked with biodegradable polymers: A review

Public perception of polymers has been drastically changed with the improved plastic management at the end of their life. However, it is widely recognised the need of developing biodegradable polymers, as an alternative to traditional petrochemical polymers. Chitosan (CH), a biodegradable biopolymer with excellent physiological and structural properties, together with its immunostimulatory and antibacterial activity, is a good candidate to replace other polymers, mainly in biomedical applications. However, CH has also several drawbacks, which can be solved by chemical modifications to improve some of its characteristics such as solubility, biological activity, and mechanical properties. Many chemical modifications have been studied in the last decade to improve the properties of CH. This review focussed on a critical analysis of the state of the art of chemical modifications by cross-linking and graft polymerization, between CH or CH derivatives and other biodegradable polymers (polysaccharides or proteins, obtained from microorganisms, synthetized from biomonomers, or from petrochemical products). Both techniques offer the option of including a wide variety of functional groups into the CH chain. Thus, enhanced and new properties can be obtained in accordance with the requirements for different applications, such as the release of drugs, the improvement of antimicrobial properties of fabrics, the removal of dyes, or as scaffolds to develop bone tissues.

Hydroxypropyl chitosan-based dual self-healing hydrogel for adsorption of chromium ions

A facile, environmentally benign approach had been developed for the preparation of dual self-healing and adsorption hydrogel through hydroxypropyl chitosan (HPCS), polyacrylamide (PAM) and polyvinyl alcohol (PVA). The self-healing capability of the hydrogels without any external stimulus was ascribed to dynamic Schiff-base bonds, borate bonds and hydrogen bonds, while the adsorption capacity of hydrogels came from the protonated amino group effect at a specific pH. It was demonstrated that the HPP DN hydrogel had a maximum equilibrium swelling ratio of 643% and a maximum compressive strength of 267 kPa. The weight loss of HPP DN hydrogel was 14.26% lower than that of HPCS/PAM single network hydrogel, furthermore, HPP DN hydrogel could achieve self-healing within 10 h. Due to the large number of active groups, the adsorption capacity of Cr⁶⁺ reached 95.31 mg/g. It could adsorb in a wide pH range of 1 to 6, and could describe by pseudo-first-order kinetic model and Langmuir adsorption isotherm model, which would provide a new idea for the adsorption and removal of heavy metal ions. In short, the prepared HPP hydrogel had dual self-healing ability, adsorption capacity and mechanical strength, which would make it a promising candidate for long-life adsorbent.

Electrospun, sepiolite-loaded poly(vinyl alcohol)/soy protein isolate nanofibers: Preparation, characterization, and their drug release behavior

Wound management and drug release are important applications for electrospun nanofibers. In this study, poly(vinyl alcohol)/soy protein isolate (PVA/SPI) nanofiber mats were produced by electrospinning and used as drug carriers. The mats were loaded with ketoprofen by dissolving the drug in the solutions for nanofiber electrospinning. To improve drug release control of the nanofiber mats, a natural tubular nanoparticle, sepiolite, was used as a secondary release control tool. Three types of nanofiber mats were fabricated by electrospinning the solutions prepared by 1) direct mixing of PVA, SPI, and ketoprofen, 2) direct mixing of PVA, SPI, sepiolite, and ketoprofen, and 3) mixing PVA, SPI, and ketoprofen-preloaded sepiolite. The drug release behavior of the mats was studied using UV-vis spectroscopy and the mechanical properties of the mats were investigated by tensile testing. The results showed that sepiolite had a high impact on the release of ketoprofen, with the drug-loaded sepiolite leading to the slowest release. The incorporation of SPI and sepiolite into the PVA nanofibers also increased the mechanical strength of the mats, making them easier to handle and potentially longer-lasting. This study demonstrated the potential of using natural biomaterials and nanomaterials as the components of controlled-release drug delivery vehicles.

Fabrication of Hydroxypropyl Chitosan/Soy Protein Isolate Hydrogel for Effective Hemorrhage Control

Hemostatic materials are increasingly important in civilian and military clinics. In this work, a hydrogel was fabricated from hydroxypropyl chitosan (HPCS) and soy protein isolate (SPI) through the crosslinking of epichlorohydrin. Effects of SPI content on the structure, and physical and biological properties of the prepared hydrogels were characterized using Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, water uptake testing, mechanical properties testing, MTT assay, hemolysis ratio testing, and routine blood coagulation test. The results indicated that the hydrogels showed high water uptake ability and compressive strength. The in vitro biocompatibility evaluation revealed that the hydrogel contains 30% SPI content (HCSH-30), could promote blood coagulation and cell proliferation. Furthermore, the hemostatic model of liver in New Zealand rabbit was applied to assess the hemostatic efficacy of the hydrogels. The results demonstrated that HCSH-30 stopped bleeding in 75 ± 1.63 s and improved hemostasis as compared with medical gauze. Thus, the HPCS/SPI hydrogel is expected to be a potential candidate for effective hemorrhage control. Impact statement Stoppage of bleeding is of paramount clinical significance in prophylactic, surgical, and emergency scenarios. This work describes a hydroxypropyl chitosan (HPCS)/soy protein isolate hydrogel, which could promote blood coagulation and cell proliferation, as well as stop bleeding in 75 ± 1.63 s on the liver of New Zealand rabbits. Thus, we provide a new candidate for hemostatic material and broaden the application of HPCS-based materials.

Biodegradable and Electroactive Regenerated Bacterial Cellulose/MXene (Ti3 C2 Tx ) Composite Hydrogel as Wound Dressing for Accelerating Skin Wound Healing under Electrical Stimulation

Traditional wound dressings mainly participate in the passive healing processes and are rarely engaged in active wound healing by stimulating skin cell behaviors. Electrical stimulation (ES) has been known to regulate skin cell behaviors. Herein, a series of multifunctional hydrogels based on regenerated bacterial cellulose (rBC) and MXene (Ti₃ C₂ T_x ) are first developed that can electrically modulate cell behaviors for active skin wound healing under external ES. The composite hydrogel with 2 wt% MXene (rBC/MXene-2%) exhibits the highest electrical conductivity and the best biocompatibility. Meanwhile, the rBC/MXene-2% hydrogel presents desired mechanical properties, favorable flexibility, good biodegradability, and high water-uptake capacity. An in vivo study using a rat full-thickness defect model reveals that this rBC/MXene hydrogel exhibits a better therapeutic effect than the commercial Tegaderm film. More importantly, in vitro and in vivo data demonstrate that coupling with ES, the hydrogel can significantly enhance the proliferation activity of NIH3T3 cells and accelerate the wound healing process, as compared to non-ES controls. This study suggests that the biodegradable and electroactive rBC/MXene hydrogel is an appealing candidate as a wound dressing for skin wound healing, while also providing an effective synergistic therapeutic strategy for accelerating wound repair process through coupling ES with the hydrogel dressing.

Biomimetic mineralization of novel hydroxyethyl cellulose/soy protein isolate scaffolds promote bone regeneration in vitro and in vivo

Although various strategies have been utilized to accelerate bone regeneration in bone tissue engineering (BTE), the treatment and repair of large bone defects remains a clinical challenge worldwide. Inspired by the natural extracellular matrix of bone tissue, organic-inorganic composite scaffolds with three-dimensional (3D) porous structures, sufficient mechanical properties, excellent cytocompatibility, osteoconductivity, and osteogenic potential have received considerable attention within the field of bone engineering. In this work, a novel epichlorohydrin (ECH)-crosslinked hydroxyethyl cellulose (HEC)/soy protein isolate (SPI) porous bi-component scaffold (EHSS) with hydroxyapatite (HAp) functionalization (EHSS/HAp) was constructed for bone defect repair via the combination of lyophilization and in situ biomimetic mineralization. Systematic characterization experiments were performed to assess the morphology, HAp-forming properties, mechanical properties and degradation rate of the scaffold. The results indicated that the prepared scaffolds exhibited an interconnected porous structure, a biomimetic HAp coating on their surfaces, improved mechanical properties in compression and a controllable degradation rate. In particular, semiquantitative analysis showed that the calcium/phosphorus (Ca/P) ratio of EHSS/HAp with 70% SPI content (1.65) was similar to that of natural bone tissue (1.67) according to energy dispersive X-ray spectroscopy analysis. In vitro cell culture experiments indicated that the EHSS/HAp with 70% SPI content showed improved cytocompatibility and was suitable for MC3T3-E1 cell attachment, proliferation and growth. Consistently, in vitro osteogenic differentiation studies showed that EHSS/HAp with 70% SPI content can significantly accelerate the expression of osteogenesis-related genes (Col-1, Runx2, OPN, and OCN) during osteogenic differentiation of MC3T3-E1 cells. Furthermore, when applied to the repair of critical-sized cranial defects in a rat model, EHSS/HAp with 70% SPI was capable of significantly promoting tissue regeneration and integration with native bone tissue. Microscopic computed tomography (micro-CT) results demonstrated that the bone defect site was nearly occupied with newly formed bone at 12 weeks after implantation of EHSS/HAp with 70% SPI content into the defect. Hematoxylin and eosin (H&E) staining and Masson's trichrome staining of histological sections further confirmed that EHSS/HAp with 70% SPI markedly promoted new bone formation and maturation. Collectively, our results demonstrate the potential of EHSS/HAp scaffolds with 70% SPI for successful bone defect repair and regeneration.

Emerging chitin nanogels/rectorite nanocomposites for safe and effective hemorrhage control

Excessive bleeding due to trauma, surgery and diseases may cause severe mortalities. Here, an emerging chitin nanogel/rectorite nanocomposite is developed for effective hemorrhage control. Chitin chains are intercalated into rectorite and subsequent mechanical high speed stirring generates chitin nanogels, which assemble on the surface of the rectorite nanoplates through electrostatic interactions to form a sandwich structure. The in vitro experiments reveal that the nanocomposite exhibits favorable biocompatibility and negligible hemolysis (<3.5%) as compared to rectorite (40%). The nanocomposite stops bleeding in 121 s in rat tail incision and exhibits higher hemostatic activity in the rabbit artery injury model as compared to a commercialized chitosan hemostat, Celox. The efficient blood clotting activity is attributed to the induction of a coagulation cascade by rectorite and the quick adsorption and aggregation of platelets and red blood cells by chitin. The enhanced biocompatibility and hemostatic activity of the chitin/rectorite nanocomposite make it a safe and cost effective hemostat to control bleeding.

Chitosan Film Containing Mansoa hirsuta Fraction for Wound Healing

Chitosan films entrapped with the Mansoa hirsuta fraction (CMHF) was developed as a new dressing for wound care. The chromatographic profile of the M. hirsuta fraction (MHF) was evaluated by ultra-high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry, and the results showed that MHF is rich in acid triterpenes. Physicochemical characterization of the films prepared using the solvent casting method was performed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetry (TGA), differential scanning calorimetry (DCS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and mechanical properties. CMHF exhibited characteristic bands of both chitosan and MHF, revealing a physical mixture of both. CMHF presented an amorphous nature, thermostability, and dispersion of MHF in the chitosan matrix, resulting in a rough structure. Incorporation of M. hirsuta fraction into chitosan matrix favorably enhanced the mechanical performance and films thickness. The in vivo wound treatment with CMHF for seven days showed a characteristic area of advanced healing, re-epithelization, cell proliferation, and collagen formation. Furthermore, wound closure reached 100% contraction after 10 days of treatment with modulation of interleukins. The incorporation of M. hirsuta fraction into chitosan films was advantageous and showed great potential for stimulating wound repair and regeneration.

Soy protein isolate supplemented silk fibroin nanofibers for skin tissue regeneration: Fabrication and characterization

Biocompatible soy protein isolate/silk fibroin (SPI/SF) nanofibrous scaffolds were successfully fabricated through electrospinning a novel protein blend SPI/SF. Prepared nanofibers were treated with ethanol vapor to obtain an improved water-stable structure. Fabricated scaffolds were characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), UV-VIS spectrophotometry and image analysis. The mean diameters of SPI/SF electrospun fibers were observed ranging between 71 and 160 nm. The scaffolds were found significantly stable for a prolong duration at the room temperature as well as at 37 °C, when placed in phosphate buffered saline, nutrient medium, and lysozyme-containing solution. The potential of fabricated scaffolds for skin tissue regeneration was evaluated by in vitro culturing of standard cell lines i.e., fibroblast cells (L929-RFP (red fluorescent protein) and NIH-3T3) and melanocytes (B16F10). The outcomes revealed that all the fabricated nanofibrous scaffolds were non-toxic towards normal mammalian cells. In addition, healing of full-thickness wound in rats within 14 days after treatment with a nanofibrous scaffold demonstrated its suitability as a potential wound dressing material. Interestingly, we found that nanofibers induced a noticeable reduction in the proliferation rate of B16F10 melanoma cells.

Promotion of Wound Healing and Prevention of Frostbite Injury in Rat Skin by Exopolysaccharide from the Arctic Marine Bacterium Polaribacter sp. SM1127

Many marine microorganisms synthesize exopolysaccharides (EPSs), and some of these EPSs have been reported to have potential in different fields. However, the pharmaceutical potentials of marine EPSs are rarely reported. The EPS secreted by the Artic marine bacterium Polaribacter sp. SM1127 has good antioxidant activity, outstanding moisture-retention ability, and considerable protective property on human dermal fibroblasts (HDFs) at low temperature. Here, the effects of SM1127 EPS on skin wound healing and frostbite injury prevention were studied. Scratch wound assay showed that SM1127 EPS could stimulate the migration of HDFs. In the full-thickness cutaneous wound experiment of Sprague-Dawley (SD) rats, SM1127 EPS increased the wound healing rate and stimulated tissue repair detected by macroscopic observation and histologic examination, showing the ability of SM1127 EPS to promote skin wound healing. In the skin frostbite experiment of SD rats, pretreatment of rat skin with SM1127 EPS increased the rate of frostbite wound healing and promoted the repair of the injured skin significantly, indicating the good effect of SM1127 EPS on frostbite injury prevention. These results suggest the promising potential of SM1127 EPS in the pharmaceutical area to promote skin wound healing and prevent frostbite injury.

Status of Plant Protein-Based Green Scaffolds for Regenerative Medicine Applications

In recent decades, regenerative medicine has merited substantial attention from scientific and research communities. One of the essential requirements for this new strategy in medicine is the production of biocompatible and biodegradable scaffolds with desirable geometric structures and mechanical properties. Despite such promise, it appears that regenerative medicine is the last field to embrace green, or environmentally-friendly, processes, as many traditional tissue engineering materials employ toxic solvents and polymers that are clearly not environmentally friendly. Scaffolds fabricated from plant proteins (for example, zein, soy protein, and wheat gluten), possess proper mechanical properties, remarkable biocompatibility and aqueous stability which make them appropriate green biomaterials for regenerative medicine applications. The use of plant-derived proteins in regenerative medicine has been especially inspired by green medicine, which is the use of environmentally friendly materials in medicine. In the current review paper, the literature is reviewed and summarized for the applicability of plant proteins as biopolymer materials for several green regenerative medicine and tissue engineering applications.

Vitamin C and B3 as new biomaterials to alter intestinal stem cells

Vitamin C (ascorbic acid) and vitamin B3 (niacin) have been extensively studied since the 20th century. In the area of stem cell biology, vitamin C has shown its direct impact toward homeostasis and epigenetic changes (D'Aniello et al., Stem Cells International, 2017, 1-16). Vitamin B3 aids in maintaining healthy intestinal homeostasis and reducing gut inflammation by participating in the rapamycin signaling pathway (Kumar et al., The American Journal of Physiology-Gastrointestinal and Liver Physiology, 2013). In this study, vitamin C and vitamin B3 (600 and 1,200 μg/mL) have been explored as potential new biomaterials to study their effects on four types of intestinal stem cells which are isolated from mice bearing different microbiota. We observed that C3H ASF and 129 ASF IL-10 are more sensitive towardB7 600 μg/mL vitamin B3 and 1,200 μg/mL vitamin C. The lowest growth rate and viability for all types of organoids was with 1,200 μg/mL vitamin C. From quantitative polymerase chain reaction analysis (qPCR analysis), MUC2 was upregulated for 129 ASF and C3H Conv when exposed to 600 μg/mL and 1,200 μg/mL vitamin C. It suggests that large amounts of glycoprotein may be produced after adding high concentrations of vitamin C. Since inflammatory bowel disease has low level of MUC2, this finding may be helpful in restoring mucosal health by upregulating the MUC2 gene while altering patient's microbiota (Sibila et al., Annals of the American Thoracic Society, 2016). These results are expected to have a positive translational impact because this bottom-up strategy would be instrumental in developing Vitamin C and B3 based orally available therapeutic strategies and formula for advancing the fields of gastrointestinal regenerative medicine.

Effect of antimicrobial peptides HNP-1 and hBD-1 on Staphylococcus aureus strains in vitro and in vivo

The aims of this study were: (i) To investigate the activity of recombinant AMPs HNP-1 and hBD-1 in combination with cefotaxime against Staphylococcus aureus strains (MSSA and MRSA) in vitro using checkerboard method; (ii) To investigate the activity of HNP-1 and hBD-1 encapsulated in silicon nanoparticles (niosomes) in the treatment of MRSA-infected wound in rats. For this S. aureus strains (MSSA and MRSA) were isolated from patients with diabetic foot infection. Cefotaxime, recombinant HNP-1 and hBD-1 (in all possible combinations with each other) were used for testing by the checkerboard method. Two niosomal topical gels with HNP-1/hBD-1 were prepared to treat MRSA-infected wounds in rats. Gels were administered once a day, the control group-without treatment. Wound healing rate was calculated on the 4th, 9th and 16th days of the experiment and compared using one-way ANOVA with Bonferroni correction. MIC of HNP-1 for MSSA and MRSA was the same-1 mg/L. MIC of hBD-1 for MSSA and MRSA was also the same-0.5 mg/L. Topical gels with niosomal HNP-1 (or hBD-1) showed a significantly faster wound healing in comparison with the control. The data obtained open up prospects for use of AMPs encapsulated in silica nanoparticles for the development of new antibiotics.

A simple mechanical agitation method to fabricate chitin nanogels directly from chitin solution and subsequent surface modification

Chitin nanogels (20–30 nm) with easy surface modification were prepared by high speed stirring of chitin solution in NaOH/urea solvent.

A Novel Complex of Chitosan⁻Sodium Carbonate and Its Properties

Chitosan has excellent properties, as it is nontoxic, mucoadhesive, biocompatible, and biodegradable. However, the poor water solubility of chitosan is a major disadvantage. Here, a novel chitosan-sodium carbonate complex was formed by adding a large amount of sodium carbonate to a chitosan/acetic acid solution, which is water-soluble. Fourier transform infrared spectroscopy, energy dispersive spectrometry, scanning electron microscopy, and solid-state nuclear magnetic resonance techniques were used to detect and characterize the aforementioned complex, which appeared to be a neat flake crystal. Solid-state nuclear magnetic resonance (SSNMR) was used to verify the connections between carbonate, sodium ions, and the protonated amino group in chitosan on the basis of 13C signals at the chemical shift of 167.745 ppm and 164.743 ppm. Further confirmation was provided by the strong cross-polarization signals identified by the SSNMR 2D 13C⁻¹H frequency-switched Lee⁻Goldberg heteronuclear correlation spectrum. The cytotoxicity of a film prepared using this complex was tested using rat fibroblasts. The results show that the film promoted cell proliferation, which provides evidence to support its nontoxicity. The ease of film-forming and the results of cytocompatibility testing suggest that the chitosan-sodium carbonate complex has the potential for use in tissue engineering.