Elucidation of lid open and orientation of lipase activated in interfacial activation by amphiphilic environment

Molecular simulations guide immobilization of lipase on nest-like ZIFs with regulatable hydrophilic/hydrophobic surface

The catalytic performance of immobilized lipase is greatly influenced by functional support, which attracts growing interest for designing supports to achieve their promotive catalytic activity. Many lipases bind strongly to hydrophobic surfaces where they undergo interfacial activation. Herein, the behavioral differences of lipases with distinct lid structures on interfaces of varying hydrophobicity levels were firstly investigated by molecular simulations. It was found that a reasonable hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation. Building on these findings, a novel "nest"-like superhydrophobic ZIFs (ZIFN) composed of hydrophobic ligands was prepared for the first time and used to immobilize lipase from Aspergillus oryzae (AOL@ZIFN). The AOL@ZIFN exhibited 2.0-folds higher activity than free lipase in the hydrolysis of p-Nitrophenyl palmitate (p-NPP). Especially, the modification of superhydrophobic ZIFN with an appropriate amount of hydrophilic tannic acid can significantly improve the activity of the immobilized lipase (AOL@ZIFN-TA). The AOL@ZIFN-TA exhibited 30-folds higher activity than free lipase, and still maintained 82% of its initial activity after 5 consecutive cycles, indicating good reusability. These results demonstrated that nanomaterials with rational arrangement of the hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation and improve its activity, displaying the potential of the extensive application.

Discovery and mechanism explanation of a novel green biocatalyst esterase Bur01 from Burkholderia ambifaria for ester synthesis under aqueous phase

Biocatalyst catalyzing the synthesis of esters under aqueous phase is an alternative with green and sustainable characteristics. Here, a biocatalyst esterase Bur01 was identified through genome sequencing and gene library construction from a Burkholderia ambifaria BJQ0010 with efficient ester synthesis property under aqueous phase for the first time. Bur01 was soluble expressed and the purified enzyme showed the highest activity at pH 4.0 and 40 °C. It had a broad substrate spectrum, especially for ethyl esters. The structure of Bur01 was categorized as a member of α/β fold hydrolase superfamily. The easier opening of lid under aqueous phase and the hydrophobicity of substrate channel contribute to easier access to the active center for substrate. Molecular docking and site-directed mutation demonstrated that the oxyanion hole Ala22, Met112 and π-bond stacking between His24 and Phe217 played essential roles in catalytic function. The mutants V149A, V149I, L159I and F137I enhanced enzyme activity to 1.42, 1.14, 1.32 and 2.19 folds due to reduced spatial resistance and increased hydrophobicity of channel and ethyl octanoate with the highest conversion ratio of 68.28 % was obtained for F137I. These results provided new ideas for developing green catalysts and catalytic basis of mechanistic studies for ester synthetase under aqueous phase.

Improved lipase performance by covalent immobilization of Candida antarctica lipase B on amino acid modified microcrystalline cellulose as green renewable support

Development of immobilized lipase with excellent catalytic performance and low cost is the major challenge for large-scale industrial applications. In this study, green renewable microcrystalline cellulose (MCC) that was hydrophobically modified with D-alanine (Ala) or L-lysine (Lys) was used for immobilizing Candida antarctica lipase B (CALB). The improved catalytic properties were investigated by experimental and computational methods. CALB immobilized on MCC-Ala with higher hydrophobicity showed better catalytic activity than CALB@MCC-Lys because the increased flexibility of the lid region of CALB@MCC-Ala favored the formation of open conformation. Additionally, the low root mean square deviation and the high β-sheet and α-helix contents of CALB@MCC-Ala indicated that the structure became more stable, leading to a significantly enhanced stability (54.80% and 90.90% relative activity at 70 °C and pH 9.0, respectively) and good reusability (48.92% activity after 5 cycles). This study provides a promising avenue to develop immobilized lipase with high catalytic properties for industry applications.

Novel Hybrid Gel-Fiber Membranes as Carriers for Lipase Catalysis Based on Electrospinning and Gelation Technology

An excellent oil-water interface is one of the prerequisites for effective lipase catalysis. Therefore, this study aimed to improve lipase activity in terms of catalytic interface optimization. A novel approach for constructing oil-water interfaces was proposed. The structural similarity and the hydrophilic differences between polyvinyl pyrrolidone gel-fiber membranes (GFMs) and poly(lauryl methacrylate) (PLMA) organogel inspired us to hybridize the two to form PVP/PLMA hybrid gel-fiber membranes (HGFMs) based on electrospinning and gelation. The prepared PVP/PLMA-HGFMs were capable of being adopted as novel carriers for lipase catalysis due to their ability to swell both in the aqueous phase (swelling ratio = 187.5%) and the organic phase (swelling ratio = 40.5%). Additionally, Confocal laser scanning microscopy (CLSM) results showed that abundant network pores inside the carriers enabled numerous effective microscopic oil-water interfaces. The catalytic activity of Burkholderia cepacia lipase (BCL) in PVP/PLMA-HGFMs ranged between 1.21 and 8.70 times that of the control ("oil-up/water-down" system) under different experimental conditions. Meanwhile, PVP/PLMA-HGFMs increased lipase activity by about eight times at -20 °C and had good application characteristics at extreme pH conditions.

Glutaraldehyde modification of lipases immobilized on octyl agarose beads: Roles of the support enzyme loading and chemical amination of the enzyme on the final enzyme features

Lipase B from Candida antarctica (CALB) and lipase from Thermomyces lanuginosus (TLL) have been immobilized on octyl agarose at low loading and at a loading exceeding the maximum support capacity. Then, the enzymes have been treated with glutaraldehyde and inactivated at pH 7.0 in Tris-HCl, sodium phosphate and HEPES, giving different stabilities. Stabilization (depending on the buffer) of the highly loaded biocatalysts was found, very likely as a consequence of the detected intermolecular crosslinkings. This did not occur for the lowly loaded biocatalysts. Next, the enzymes were chemically aminated and then treated with glutaraldehyde. In the case of TLL, the intramolecular crosslinkings (visible by the apparent reduction of the protein size) increased enzyme stability of the lowly loaded biocatalysts, an effect that was further increased for the highly loaded biocatalysts due to intermolecular crosslinkings. Using CALB, the intramolecular crosslinkings were less intense, and the stabilization was lower, even though the intermolecular crosslinkings were quite intense for the highly loaded biocatalyst. The stabilization detected depended on the inactivation buffer. The interactions between enzyme loading and inactivating buffer on the effects of the chemical modifications suggest that the modification and inactivation studies must be performed under the target biocatalysts and conditions.

Discovery and mechanism-guided engineering of BHET hydrolases for improved PET recycling and upcycling

Although considerable research achievements have been made to address the plastic crisis using enzymes, their applications are limited due to incomplete degradation and low efficiency. Herein, we report the identification and subsequent engineering of BHETases, which have the potential to improve the efficiency of PET recycling and upcycling. Two BHETases (ChryBHETase and BsEst) are identified from the environment via enzyme mining. Subsequently, mechanism-guided barrier engineering is employed to yield two robust and thermostable ΔBHETases with up to 3.5-fold enhanced kcat/KM than wild-type, followed by atomic resolution understanding. Coupling ΔBHETase into a two-enzyme system overcomes the challenge of heterogeneous product formation and results in up to 7.0-fold improved TPA production than seven state-of-the-art PET hydrolases, under the conditions used here. Finally, we employ a ΔBHETase-joined tandem chemical-enzymatic approach to valorize 21 commercial post-consumed plastics into virgin PET and an example chemical (p-phthaloyl chloride) for achieving the closed-loop PET recycling and open-loop PET upcycling.

The Conformational Transitions and Dynamics of Burkholderia cepacia Lipase Regulated by Water-Oil Interfaces

Structural dynamics and conformational transitions are crucial for the activities of enzymes. As one of the most widely used industrial biocatalysts, lipase could be activated by the water-oil interfaces. The interface activations were believed to be dominated by the close-to-open transitions of the lid subdomains. However, the detailed mechanism and the roles of structure transitions are still under debate. In this study, the dynamic structures and conformational transitions of Burkholderia cepacia lipase (LipA) were investigated by combining all-atom molecular dynamics simulations, enhanced sampling simulation, and spectrophotometric assay experiments. The conformational transitions between the lid-open and lid-closed states of LipA in aqueous solution are directly observed by the computational simulation methods. The interactions between the hydrophobic residues on the two lid-subdomains are the driven forces for the LipA closing. Meanwhile, the hydrophobic environment provided by the oil interfaces would separate the interactions between the lid-subdomains and promote the structure opening of LipA. Moreover, our studies demonstrate the opening of the lids structure is insufficient to initiate the interfacial activation, providing explanations for the inability of interfacial activation of many lipases with lid structures.

Hollow Mesoporous Carbon-Based Enzyme Nanoreactor for the Confined and Interfacial Biocatalytic Synthesis of Phytosterol Esters

Rationally designing carriers to obtain efficient and stable immobilized enzymes for the production of food raw materials is always a challenge. In this work, hollow cube carbon (HMC) as a carrier of Candida rugosa lipase (CRL) was prepared to construct a Pickering interfacial biocatalysis system, which was applied to biphasic biocatalysis. For comparison, the nonporous carbon (HC) and porous MoS₂ (HMoS₂) were also designed. On these grounds, p-NPP and linolenic acid were selected as the representative substrates for hydrolysis and esterification reactions. Under the optimal conditions, the protein loading amount, specific activity, and expressed activity of CRL immobilized on HMC (HMC@CRL) were 167.2 mg g^-1, 5.41 U mg^-1, and 32.34 U/mg protein, respectively. In the "oil-water" biphase, the relative hydrolytic activity of HMC@CRL was higher than that of HC@CRL, HMoS₂@CRL, and CRL by 50, 68, and 80%, respectively, as well as itself in one phase. Compared to other reports (1.13%), HMC@CRL demonstrated a satisfactory hydrolysis rate (3.02%) and was the fastest among all other biocatalysts in the biphase. Moreover, compared with the free CRL in one-phase system, the Pickering interfacial biphasic biocatalyst, HMC@CRL, exhibited a higher esterification rate (85%, 2.7-fold enhancement). Therefore, the HMC@CRL nanoreactors had more optimal performance in the field of biomanufacturing and food industry.

Novel Lipase Reactor based on Discontinuous Interfaces in Hydrogel-Organogel Hybrid Gel: A Preliminary Exploration

According to the "interfacial activation" mechanism, constructing a sufficient interface is the key strategy for lipase-catalytic system designing. Based on the "infinite interface in finite three-dimensional space" logic, in the current study, poly(N,N-dimethylacrylamide) (PDMA)-polybutyl methacrylate (PBMA) hybrid gels were prepared by a two-step crosslinking strategy, subsequently constructed as lipase-interfacial catalytic systems. The results confirm that the PDMA-PBMA hybrid gels with "networks in pores" structures could swell both the aqueous phase and organic phase. The balance between water swelling and isooctane swelling, hybrid gel space (height control), and the lipase entry manner significantly affect the interface construction and consequently the catalytic efficiency. The enzyme-substrate contact rate affected by swelling leads to three catalytic stages. Considering the spatial barrier and distribution of lipases, a potential high-performance lipase reactor can be assembled from small-size, lamellar-like, and porous hybrid gels. The reactors also show good time storage and low temperature tolerance.

Amphiphilic Nanointerface: Inducing the Interfacial Activation for Lipase

Graphene-based materials are widely used in the field of immobilized enzymes due to their easily tunable interfacial properties. We designed amphiphilic nanobiological interfaces between graphene oxide (GO) and lipase TL (Thermomyces lanuginosus) with tunable reduction degrees through molecular dynamics simulations and a facile chemical modulation, thus revealing the optimal interface for the interfacial activation of lipase TL and addressing the weakness of lipase TL, which exhibits weak catalytic activity due to an inconspicuous active site lid. It was demonstrated that the reduced graphene oxide (rGO) after 4 h of ascorbic acid reduction could boost the relative enzyme activity of lipase TL to reach 208%, which was 48% higher than the pristine GO and 120% higher than the rGO after 48 h of reduction. Moreover, TL-GO-4 h's tolerance against heat, organic solvent, and long-term storage environment was higher than that of free TL. The drawbacks of strong hydrophobic nanomaterials on lipase production were explored in depth with the help of molecular dynamics simulations, which explained the mechanism of enzyme activity enhancement. We demonstrated that nanomaterials with certain hydrophilicity could facilitate the lipase to undergo interfacial activation and improve its stability and protein loading rate, displaying the potential of the extensive application.

Improved catalytic properties of Candida antarctica lipase B immobilized on cetyl chloroformate-modified cellulose nanocrystals

The catalytic activity of Candida antarctica lipase B (CALB) immobilized on modified cellulose nanocrystals (CNC) with different hydrophobicity was investigated using experimental and theoretical approaches. Firstly, the modified CNC were characterized by multi-spectroscopic methods, water contact angle, scanning electron microscopy and thermogravimetric analysis. Moderately hydrophobic CNC were found to be an optimal support for CALB immobilization. Secondly, model systems contained a CALB molecule and different numbers of modified CNC molecules (CALB@3CNC-C16, CALB@10CNC-C16 and CALB@15CNC-C16) were prepared for molecular dynamics (MD) simulation. Root-mean-square fluctuation values (0.61-2.61 Å) of lid region were relatively high in CALB@10CNC-C16, indicating that modified CNC with moderate hydrophobicity favored forming a lid-open conformation of CALB. Finally, the esterification of oleic acid catalyzed by the immobilized CALB showed higher conversion (54.68 %) than free CALB (12.98 %). Insights into modified CNC with tunable properties provided by this study may be a potential support for improving the catalytic performance of lipases.

Rebuilding the lid region from conformational and dynamic features to engineering applications of lipase in foods: Current status and future prospects

The applications of lipases in esterification, amidation, and transesterification have broadened their potential in the production of fine compounds with high cumulative values. Mostly, the catalytic triad of lipases is covered by either one or two mobile peptides called the "lid" that control the substrate channel to the catalytic center. The lid holds unique conformational allostery via interfacial activation to regulate the dynamics and catalytic functions of lipases, thereby highlighting its importance in redesigning these enzymes for industrial applications. The structural characteristic of lipase, the dynamics of lids, and the roles of lid in lipase catalysis were summarized, providing opportunities for rebuilding lid region by biotechniques (e.g., metagenomic technology and protein engineering) and enzyme immobilization. The review focused on the advantages and disadvantages of strategies rebuilding the lid region. The main shortcomings of biotechnologies on lid rebuilding were discussed such as negative effects on lipase (e.g., a decrease of activity). Additionally, the main shortcomings (e.g., enzyme desorption at high temperatre) in immobilization on hydrophobic supports via interfacial action were presented. Solutions to the mentioned problems were proposed by combinations of computational design with biotechnologies, and improvements of lipase immobilization (e.g., immobilization protocols and support design). Finally, the review provides future perspectives about designing hyperfunctional lipases as biocatalysts in the food industry based on lid conformation and dynamics.

Immobilization of Lipases on Modified Silica Clay for Bio-Diesel Production: The Effect of Surface Hydrophobicity on Performance

The hydrophobicity of a support plays a critical role in the catalytic efficiency of immobilized lipases. 3-aminopropyltriethoxysilane (APTES)-modified silica clay (A-SC) was coupled with silane coupling agents of different alkyl chains (methyl triethoxysilane, vinyl triethoxysilane, octyl triethoxysilane, and dodecyl triethoxysilane) to prepare a series of hydrophobic support for lipase immobilization. The lipases were immobilized onto the support by conducting glutaraldehyde cross-linking processes. The results showed that the activity of the immobilized biocatalyst increased with hydrophobicity. The hydrolytic activity of Lip-Glu-C12-SC (contact angle 119.8°) can reach 5900 U/g, which was about three times that of Lip-Glu-A-SC (contact angle 46.5°). The immobilized lipase was applied as a biocatalyst for biodiesel production. The results showed that the catalytic yield of biodiesel with highly hydrophobic Lip-Glu-C12-SC could be as high as 96%, which is about 30% higher than that of Lip-Glu-A-SC. After being recycled five times, the immobilized lipase still maintained good catalytic activity and stability. This study provides a good strategy to improve the efficiency of immobilized lipases, showing great potential for future industrial application on biodiesel production.

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Constitutive Expression in Komagataella phaffii of Mature Rhizopus oryzae Lipase Jointly with Its Truncated Prosequence Improves Production and the Biocatalyst Operational Stability

Rhizopus oryzae lipase (ROL) containing 28 C-terminal amino acids of the prosequence fused to the N-terminal mature sequence in ROL (proROL) was successfully expressed in the methylotrophic yeast Komagataella phaffii (Pichia pastoris) under the constitutive glyceraldehyde-3-phosphate dehydrogenase promoter (PGAP). Although the sequence encoding the mature lipase (rROL) was also transformed, no clones were obtained after three transformation cycles, which highlights the importance of the truncated prosequence to obtain viable transformed clones. Batch cultures of the K. phaffii strain constitutively expressing proROL scarcely influenced growth rate and exhibited a final activity and volumetric productivity more than six times higher than those obtained with proROL from K. phaffii under the methanol-inducible alcohol oxidase 1 promoter (PAOX1). The previous differences were less marked in fed-batch cultures. N-terminal analysis confirmed the presence of the 28 amino acids in proROL. In addition, immobilized proROL exhibited increased tolerance of organic solvents and an operational stability 0.25 and 3 times higher than that of immobilized rROL in biodiesel and ethyl butyrate production, respectively. Therefore, the truncated prosequence enables constitutive proROL production, boosts bioprocess performance and provides a more stable biocatalyst in two reactions in which lipases are mostly used at industrial level, esterification (ethyl butyrate) and transesterification (biodiesel).

Chemo-Enzymatic Baeyer-Villiger Oxidation Facilitated with Lipases Immobilized in the Supported Ionic Liquid Phase

A novel method for chemo-enzymatic Baeyer–Villiger oxidation of cyclic ketones in the presence of supported ionic liquid-like phase biocatalyst was designed. In this work, multi-walled carbon nanotubes were applied as a support for ionic liquids which were anchored to nanotubes covalently by amide or imine bonds. Next, lipases B from Candida antarctica, Candida rugosa, or Aspergillus oryzae were immobilized on the prepared materials. The biocatalysts were characterized using various techniques, like thermogravimetry, IR spectroscopy, XPS, elemental analysis, and SEM-EDS microscopy. In the proposed approach, a biocatalyst consisting of a lipase as an active phase allowed the generation of peracid in situ from the corresponding precursor and a green oxidant–hydrogen peroxide. The activity and stability of the obtained biocatalysts in the model oxidation of 2-adamantanone were demonstrated. High conversion of substrate (92%) was achieved under favorable conditions (toluene: n-octanoic acid ratio 1:1 = v:v, 35% aq. H₂O₂ 2 eq., 0.080 g of biocatalyst per 1 mmol of ketone at 20 °C, reaction time 4 h) with four reaction cycles without a drop in its activity. Our ‘properties-by-design’ approach is distinguished by its short reaction time at low temperature and higher thermal stability in comparison with other biocatalysts presented in the literature reports.

Outperformance in Acrylation: Supported D-Glucose-Based Ionic Liquid Phase on MWCNTs for Immobilized Lipase B from Candida antarctica as Catalytic System

This study presents a highly efficient method of a synthesis of n-butyl acrylate via esterification of acrylic acid and n-butanol in the presence of supported ionic liquid phase (SILP) biocatalyst consisting of the lipase B from Candida antarctica (CALB) and multi-walled carbon nanotubes (MWCNTs) modified by D-glucose-based ionic liquids. Favorable reaction conditions (acrylic acid: n-butanol molar ratio 1:2, cyclohexane as a solvent, biocatalyst 0.150 g per 1 mmol of acrylic acid, temperature 25 °C) allowed the achievement of a 99% yield of n-butyl acrylate in 24 h. Screening of various ionic liquids showed that the most promising result was obtained if N-(6-deoxy-1-O-methoxy-α-D-glucopyranosyl)-N,N,N-trimethylammonium bis-(trifluoromethylsulfonyl)imide ([N(CH3)3GlcOCH3][N(Tf)2]) was selected in order to modify the outer surface of MWCNTs. The final SILP biocatalyst-CNTs-[N(CH3)3GlcOCH3][N(Tf)2]-CALB contained 1.8 wt.% of IL and 4.2 wt.% of CALB. Application of the SILP biocatalyst led to the enhanced activity of CALB in comparison with the biocatalyst prepared via physical adsorption of CALB onto MWCNTs (CNTs-CALB), as well as with commercially available Novozyme 435. Thus, the crucial role of IL in the stabilization of biocatalysts was clearly demonstrated. In addition, a significant stability of the developed biocatalytic system was confirmed (three runs with a yield of ester over 90%).

Cold Active Lipases: Biocatalytic Tools for Greener Technology

Lipases are enzymes that catalyze the ester bond hydrolysis in triglycerides with the release of fatty acids, mono- and diglycerides, and glycerol. The microbial lipases account for $400 million market size in 2017 and it is expected to reach $590 million by 2023. Many biotechnological processes are expedited at high temperatures and hence much research is dealt with thermostable enzymes. Cold active lipases are now gaining importance in the detergent, synthesis of chiral intermediates and frail/fragile compounds, and food and pharmaceutical industries. In addition, they consume less energy since they are active at low temperatures. These cold active lipases have not been commercially exploited so far compared to mesophilic and thermophilc lipases. Cold active lipases are distributed in microbes found at low temperatures. Only a few microbes were studied for the production of these enzymes. These cold-adapted enzymes show increased flexibility of their structures in response to freezing effect of the cold habitats. This review presents an update on cold-active lipases from microbial sources along with some structural features justifying high enzyme activity at low temperature. In addition, recent achievements on their use in various industries will also be discussed.

A phenylalanine dynamic switch controls the interfacial activation of Rhizopus chinensis lipase

The catalytic mechanism of most lipases involves a step called "interfacial activation" which significantly increases lipases activity beyond the critical micellar concentration (CMC) of substrate. In the present study, Rhizopus chinensis lipase (RCL) was used as a research model to explore the mechanism of lipase interfacial activation beyond the CMC. Molecular dynamic (MD) simulations indicated the open- and closed-lid transitions and revealed that Phe113 was the critical site for RCL activation by its dynamic flipping. Such putative switch affecting interfacial activation has not been reported in lipase so far. The function of Phe113 was subsequently verified by mutation experiments. The F113W mutant increases the lipase catalytic efficiency (1.9 s^-1·μM^-1) to 280% at the optimum temperature (40 °C) and pH 8.5 with the addition of 0.12 μg protein in the 200 μL reaction system. MD simulations indicated that the fast flipping rate from the closed to the open state, the high open state proportion, and the exposure of the catalytic triad are the main reasons for the lipase activation. The mutual corroboration of simulations and site-directed mutagenesis results revealed the vital role of Phe113 in the lipase activation.

Reshaping the binding pocket of purine nucleoside phosphorylase for improved production of 2-halogenated-2′-deoxyadenosines

Semi-rational design and iterative combinatorial mutation of AmPNP with gratifyingly improved activity toward steric impediment of 2-halogenated-2′-deoxyadenosine biosynthesis.

The Hitchhiker's guide to biocatalysis: recent advances in the use of enzymes in organic synthesis

Enzymes are excellent catalysts that are increasingly being used in industry and academia. This perspective is primarily aimed at synthetic organic chemists with limited experience using enzymes and provides a general and practical guide to enzymes and their synthetic potential, with particular focus on recent applications.

Rational design to improve activity of the Est3563 esterase from Acinetobacter sp. LMB-5

Acinetobacter sp. strain LMB-5 can produce a kind of esterase degrading phthalate esters. However, low activity of Est3563 esterase limited its large-scale application. In this study, computer-aided simulation mutagenesis was used to improve the esterase activity with a tightened screening library and enlarged success rate. Two positive mutants, P218R and A242R, were obtained with 2.5 and 2.1 folds higher than the WT Est3563 esterase, with 11.96 ± 0.45 U·mg^-1 and 9.90 ± 0.52 U·mg^-1, respectively. With the help of bioinformatics analysis and three-dimensional printing technology, it was found that the mutations could increase the 240-280 residues swing distance and make them deviate from the catalytic pocket. The instability and deviation of these residues on the lid-like structure of the esterase could deteriorate the seal of the binding pocket and expose the active site. Thus, the catalytic efficiency of the mutants became higher. This result demonstrates that the instability and deviation of the lid-like structure could expand the binding pocket of the esterase and enhance the esterase activity.

Novozym 435: the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes with its advantages and drawbacks.