Bio-based UV protective films prepared with polylactic acid (PLA) and Phoebe zhennan extractives

Mussel-inspired polydopamine modified mica with enhanced mechanical strength and thermal performance of poly(lactic acid) coating

Polylactic acid (PLA), as a green functional polymer, has been useful in various coating applications. However, due to the low mechanical strength and thermal stability of PLA, it needs to be improved in order to expand its application areas. In this work, a series of polylactic acid (PLA) nanocomposite films were prepared through introducing polydopamine-modified mica (PDA@MICA) as a self-assemble nanofiller to enhance its mechanical and thermal properties. The results demonstrated that PLA/PDA@MICA shows excellent mechanical properties. Tensile tests showed that PLA/PDA@MICA exhibits a 58.3 % increase in tensile strength and a 16.8 % increase in Young's modulus compared to pure PLA. Meanwhile, thermal performance testing shown the introduction of PDA@MICA led to an increase in crystallinities (Xc = 24.78 %). And the thermal decomposition temperature of PLA/PDA@MICA film (374 °C) was slightly higher than that of PLA film (367 °C). The simultaneous improvement of the mechanical and thermal properties was attributed to the formation of hydrogen bonds between PLA and PDA@MICA. In addition, the parallel arrangement of PDA@MICA and PLA macromolecular chains forms a unique "brick and mortar" structure in the coating, which enhances the mechanical properties of PLA/PDA@MICA composite coatings. This study reports a successful approach to simultaneously address the drawbacks of PLA, specifically its low thermal stability and mechanical strength, thereby promoting its widespread application in the coatings industry.

Effect of apple polyphenols on physicochemical properties of pea starch/pulp cellulose nanofiber composite biodegradable films

A pea starch (PS) and pulp cellulose nanofibers (CNF-P) hybrid matrix biodegradable film was prepared using apple polyphenol (AP) as the active substance. SEM and thermogravimetric analyses showed that apple polyphenols could be uniformly distributed and form hydrogen bonds with the matrix, and the increase in crystallinity improved the thermal stability of the films (the final residue of the films increased from 22.66 % to 31.82 %). The TS and EAB of the films reached their maximum values of 11.14 ± 1.73 MPa and 71.55 ± 8.8 %, respectively, at an AP content of 1.5 %. It should be noted that the antioxidant properties of the films were significantly positively correlated with the AP content, and the DPPH radical scavenging rate of the films reached 73.77 % at an AP content of 4.5 %, which was about 49 times higher than that of the control film. The same trend was observed in the UV-vis spectra. In addition, the total color difference and water solubility of the membranes increased from 4.29 ± 0.29 to 31.86 ± 1.90 and from 20.01 ± 0.97 % to 21.70 ± 1.99 %, respectively, and the biodegradability also showed an upward trend. These findings provide a theoretical basis and data support for the development of multifunctional biodegradable food packaging materials.

Poly(lactic acid)/cholecalciferol based composites for active food packaging application

Poly(lactic acid) (PLA) based sustainable composites incorporated with cholecalciferol (Vitamin D3) (CC) at different concentrations (1, 3, 5 and 10 wt%) were prepared using solvent casting method. Performance analysis of PLA/CC composite films in terms of food packaging properties like thermal, optical, oxygen barrier, mechanical, anti-bacterial as well as anti-oxidant effect is carried out. The PLA/CC-5 composite showed complete blockage of UV-B light at 320 nm, which is known to significantly induce the photo-chemical degradation of polymers. The incorporation of CC in the PLA matrix brought in improvement in mechanical and oxygen barrier properties. The PLA composite films showed effective antibacterial activity against food borne bacteria (S. aureus and E. coli), in addition to excellent antioxidant activity. All these important traits exhibited by PLA/CC composite films suggest its potential for food packaging application.

Toward the Scalable Fabrication of Fully Bio-Based Antimicrobial and UVB-Blocking Transparent Polylactic Acid Films That Incorporate Natural Coatings and Nanopatterns

Microbial transmissions via membrane surface and single-use plastic-induced pollution are two urgent societal problems. This research introduces a scalable fabrication strategy for fully biobased antibacterial and ultraviolet-B block polylactic acid (PLA) films integrating natural coatings and nanopatterns via ultrasonic atomization spray coating and thermal nanoimprinting lithography (TNIL) techniques, respectively. Tannic acid (TA) and gallic acid (GA) were formulated prior to TNIL using anode aluminum oxide template. Results reveal that TA and GA inks display intense adsorption in the UVB region. Plasma increases the hydrophilicity of PLA films for fast spreading of ink droplets. Micron-sized pillars observed on film confirm the successful structural replication. TA-coated PLA films display higher transparency than GA-coated ones. Nanopatterned PLA films have a modest antibacterial resistance of c. 45% against Escherichia coli. TA/GA coatings, however, impart PLA films with a bacterial reduction rate of over 80%. The integration of a TA or GA coating with nanopatterns further promotes the antibacterial rate up to 98%. The cytocompatibility of TA and GA demonstrates that the engineered film can potentially be applied as food packaging. Finally, a continuous mass production strategy is proposed along with an outline of the associated challenges and costs. This study provides a scalable strategy to the sustainable development of eco-benign and functional films.

Plant Bioactives in the Treatment of Inflammation of Skeletal Muscles: A Molecular Perspective

Skeletal muscle mass responds rapidly to growth stimuli, precipitating hypertrophies (increased protein synthesis) and hyperplasia (activation of the myogenic program). For ages, muscle degeneration has been attributed to changes in the intracellular myofiber pathways. These pathways are tightly regulated by hormones and lymphokines that ultimately pave the way to decreased anabolism and accelerated protein breakdown. Despite the lacunae in our understanding of specific pathways, growing bodies of evidence suggest that the changes in the myogenic/regenerative program are the major contributing factor in the development and progression of muscle wasting. In addition, inflammation plays a key role in the pathophysiology of diseases linked to the failure of skeletal muscles. Chronic inflammation with elevated levels of inflammatory mediators has been observed in a spectrum of diseases, such as inflammatory myopathies and chronic obstructive pulmonary disease (COPD). Although the pathophysiology of these diseases varies greatly, they all demonstrate sarcopenia and dysregulated skeletal muscle physiology as common symptoms. Medicinal plants harbor potential novel chemical moieties for a plenitude of illnesses, and inflammation is no exception. However, despite the vast number of potential antiinflammatory compounds found in plant extracts and isolated components, the research on medicinal plants is highly daunting. This review aims to explore the various phytoconstituents employed in the treatment of inflammatory responses in skeletal muscles, while providing an in-depth molecular insight into the latter.

Development and characterization of biodegradable ultraviolet protective and antibacterial polylactic acid-cellulose acetate film modified by phenyl salicylate

The polylactic acid composite films were successfully fabricated via the technique of solvent casting using cellulose acetate (20%, wt) as the reinforcing material and phenyl salicylate as the ultraviolet (UV) absorbent and antibacterial agent. Polylactic acid-cellulose acetate-phenyl salicylate composite films displayed complete absorption effect at the region of UV-C (280-100 nm) and UV-B (315-280 nm), and more than 95% UV absorption effect at the region of UV-A (400-315 nm). These results indicate that the UV shielding performance of the composite films could be significantly improve by addition of phenyl salicylate. Moreover, the addition of 20% phenyl salicylate could improve the steam resistance, mechanical properties and thermal stability of the films, and the composite films had also better antibacterial activity against Escherichia coli. The composite films could reduce the decay rate of fresh lilies and extend their storage time. The degradation characteristics of the films were explored in the natural environment and the laboratory level, which provided application prospect for the development of degradable food packaging materials with anti-ultraviolet and anti-bacteria effect.

Facile adjustment on cellulose nanocrystals composite films with glycerol and benzyl acrylate copolymer for enhanced UV shielding property

In the present work, cellulose nanocrystals (CNCs) composite films with suitable applicable capabilities were prepared by facilely incorporating glycerol (Gly) and poly(benzyl acrylate) (PBA). Chemical and morphological variations during the fabrication of the films were systematically characterized. The properties of modified CNCs composite films including UV blocking ability, mechanical strength and thermal properties were characterized to assess their applicable potentials. As a result, the composite films have good UV shielding property in UVC (220-280 nm) region and UVB (280-320 nm) region. The shielding performance of the modified film in the ultraviolet absorption region reached 92.77% to 95.49% respectively, without damaging the original chiral nematic structure of the films. Along with the modification, BACNC film improved the mechanical properties, presenting the tensile strength 16 times higher compared to pure CNCs film. The nanocomposite films proposed in this work showed promising potentials in broad fields, such as food preservation, medical protection, and surface coating applications.

Development and characterisation of packaging film from Napier cellulose nanowhisker reinforced polylactic acid (PLA) bionanocomposites

A packaging material that is environment-friendly with excellent mechanical and physicochemical properties, biodegradable and ultraviolet (UV) protection and thermal stability was prepared to reduce plastic waste. Six different concentrations of Pennisetum purpureum/Napier cellulose nanowhiskers (NWCs) (i.e. 0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) were used to reinforce polylactic acid (PLA) by a solvent casting method. The resulting bionanocomposite film samples were characterised in terms of their morphology, chemical structure, crystallinity, thermal degradation and stability, light transmittance, water absorption, biodegradability, and physical and mechanical properties. Field-emission scanning electron microscopy showed the excellent dispersion of NWC in the PLA matrix occurred with NWC concentrations of 0.5-1.5 wt%. All the bionanocomposite film samples exhibited good thermal stability at approximately 343-359 °C. The highest water absorption was 1.94%. The lowest transparency at λ₈₀₀ was 16.16% for the PLA/3.0% NWC bionanocomposite film, which also has the lowest UVA and UVB transmittance of 7.49% and 4.02%, respectively, making it suitable for packaging materials. The PLA/1.0% NWC film exhibited the highest crystallinity of 50.09% and high tensile strength and tensile modulus of 21.22 MPa and 11.35 MPa, respectively.

DOPO-Decorated Two-Dimensional MXene Nanosheets for Flame-Retardant, Ultraviolet-Protective, and Reinforced Polylactide Composites

This study presents a novel and facile strategy for fabricating fire-resistant, ultraviolet (UV)-shielding, and tensile-enhanced polylactide (PLA) composites using two-dimensional (2D) MXene (Ti₃C₂) flakes chemically modified with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The thermal and burning performances of PLA composites were demonstrated by the limiting oxygen index, UL-94 test, and cone calorimetry. The UV-shielding and tensile performances were also examined. The results revealed that PLA/Ti₃C₂-DOPO (3 wt %) displayed a V-0 rating in the UL-94 test. The enhancement against fire hazard was reflected by the significant reduction in the peak heat release rate (33.7%), total heat release (47%), peak CO production (58.8%), and total smoke production (41.7%). The improved fire-safety performance of the composites is attributed to the interplay of catalytic, barrier, and condensed effects of the Ti₃C₂-DOPO nanosheets in the PLA matrix. PLA/Ti₃C₂-DOPO also showed an increase (∼9%) in tensile strength and an "Excellent" level (UPF 50+) in the UV-protection assessment. In all, this study introduces a novel chemical modification strategy for 2D MXene flakes to fabricate multifunctional PLA composites, which are promising candidates for next-generation sustainable and protective plastic products.

UV Protective, Antioxidant, Antibacterial and Compostable Polylactic Acid Composites Containing Pristine and Chemically Modified Lignin Nanoparticles

Polylactic acid (PLA) films containing 1 wt % and 3 wt % of lignin nanoparticles (pristine (LNP), chemically modified with citric acid (caLNP) and acetylated (aLNP)) were prepared by extrusion and characterized in terms of their overall performance as food packaging materials. Morphological, mechanical, thermal, UV–Vis barrier, antioxidant and antibacterial properties were assayed; appropriate migration values in food simulants and disintegration in simulated composting conditions were also verified. The results obtained indicated that all lignin nanoparticles succeeded in conferring UV-blocking, antioxidant and antibacterial properties to the PLA films, especially at the higher filler loadings assayed. Chemical modification of the fillers partially reduced the UV protection and the antioxidant properties of the resulting composites, but it induced better nanoparticles dispersion, reduced aggregates size, enhanced ductility and improved aesthetic quality of the films through reduction of the characteristic dark color of lignin. Migration tests and disintegration assays of the nanocomposites in simulated composting conditions indicated that, irrespectively of their formulation, the multifunctional nanocomposite films prepared behaved similarly to neat PLA.

Improved mechanical, water vapor barrier and UV-shielding properties of cellulose acetate films with flower-like metal-organic framework nanoparticles

Flower-like metal-organic frameworks (Cu-MOF) nanoparticles are successfully synthesized and incorporated into cellulose acetate (CA) matrix to prepare CA-based functional nanocomposite films via a simple solution-casting method. The effect of the incorporation of flower-like Cu-MOF on the morphological, mechanical, thermal, surface wettability, water vapor barrier, cytotoxicity, photostability and UV-shielding properties of CA films is fully investigated. Results reveal that the flower-like Cu-MOF has good compatibility with CA, providing uniform and compact nanocomposite films. The as-prepared nanocomposite films show improved mechanical properties, surface hydrophobicity, water vapor barrier ability compared to neat CA film, and exhibit super UV-shielding capability through the entire UV regions meanwhile retaining a high visible transparency. Moreover, the high transparency and UV-shielding ability of the nanocomposite films can be still maintained even after continuous UV-light (365 nm) irradiation for 12 h. In addition, MTT cytotoxicity assays towards normal human liver cells (HL-7702) reveal high cell viability (over 80%) and good biocompatibility for the CA/Cu-MOF nanocomposite films. These results indicate that the CA/Cu-MOF nanocomposite films with obviously improved physical and functional performances hold significant potential for transparent packaging and UV-protection applications.

Medicinal plants used against various inflammatory biomarkers for the management of rheumatoid arthritis

OBJECTIVES

Rheumatoid arthritis is a chronic autoimmune disease manifested clinically by polyarthralgia associated with joint dysfunction triggering the antibodies targeting against the self-neoepitopes determined by autoimmune responses associated with chronic arthritic attacks. The activation of macrophages and other defence cells in response to self-epitopes as biomarkers in RA provides a better understanding of pathogenesis of disease and has led to the development of novel therapeutic approaches acting as potent inhibitors of these cells.

KEY FINDINGS

The current review retrieved the various medicinal plants possessing an active phytoconstituents with anti-inflammatory and antioxidant properties, which tends to be effective alternative approach over the synthetic drugs concerned with high toxic effects. The current available literature provided an evident data concluding that the active constituents like fatty acids, flavonoids, terpenes and sesquiterpene lactones attenuate the RA symptoms by targeting the inflammatory biomarkers involved in the pathogenesis of RA.

SUMMARY

Despite the various synthetic treatment approaches targeting immune cells, cytokines improved the quality of life but still the drug management is challenging due to toxic and chronic teratogenic effects with anti-arthritic drugs. The current review has elaborated the selected traditionally used herbal medicinal plants with phytoconstituents possessing anti-inflammatory activity by suppressing the inflammatory biomarkers with lesser side effects and providing the future exploration of natural drug therapy for rheumatoid arthritis.

Characterization of Ethyl Acetate and Trichloromethane Extracts from Phoebe zhennan Wood Residues and Application on the Preparation of UV Shielding Films

In this work, ethyl acetate (EA) and trichloromethane (TR) extracts were extracted from Phoebezhennan wood residues and the extracts were then applied to the preparation of UV shielding films (UV-SF). The results revealed that substances including olefins, phenols and alcohols were found in both EA and TR extracts, accounting for about 45% of all the detected substances. The two extracts had similar thermal stability and both had strong UV shielding ability. When the relative percentage of the extract is 1 wt% in solution, the extract solution almost blocked 100% of the UV-B (280–315 nm), and UV-A (315–400 nm). Two kinds of UV-SF were successfully prepared by adding the two extracts into polylactic acid (PLA) matrix. The UV-SF with the addition of 24 wt% of the extractive blocked 100% of the UV-B (280–315 nm) and more than 80% of the UV-A (315–400 nm). Moreover, the UV shielding performance of the UV-SF was still stable even after strong UV irradiation. Though the addition of extracts could somewhat decrease the thermal stability of the film, its effect on the end-use of the film was ignorable. EA extracts had less effect on the tensile properties of the films than TR extracts as the content of the extract reached 18%. The results of this study could provide fundamental information on the potential utilization of the extracts from Phoebe zhennan wood residues on the preparation of biobased UV shielding materials.

High-Strength, Low-Permeable, and Light-Protective Nanocomposite Films Based on a Hybrid Nanopigment and Biodegradable PLA for Food Packaging Applications

Herein, a multifunctional filler, a dye (organic)-clay (inorganic) hybrid nanopigment (DCNP), was embedded into polylactic acid (PLA) to fabricate a colored biodegradable/biocompatible film, which is explored as a high thermomechanical resistant as well as a superior light and mass transport barrier for food packaging applications. In this respect, the DCNP was synthesized through a wet chemical process with a reaction yield of 76% and incorporated into a PLA matrix at various concentrations using a solution casting method. The morphological characterizations revealed partially intercalated/exfoliated structure for PLA-DCNP films. The samples filled with DCNP showed up to 20% and 12 °C improvements in storage modulus (E') and glass transition temperature (T g), respectively, compared to those with neat PLA. Incorporation of a small amount of DCNP into the PLA matrix significantly declined the water vapor and gas permeability of PLA by 36 and 54%, respectively. The optical property investigations indicated remarkable color characteristics and light protection performance of the samples containing DCNP. The results also showed better performance of the PLA-DCNP film compared to that of the PLA-Cloisite 20A sample at an identical filler loading. In conclusion, the desirable properties of the resulting films highlighted the potential application of such nanocomposite films as a promising option for food packaging materials.