Highly reusable Bi2O3/electron-Cu-shuttle in-situ immobilized polyacrylonitrile fibrous mat for efficient photocatalytic degradation of methylene blue and rhodamine B dyes

Organic semiconductor-based photocatalysts have been alluring due to their edge over inorganic photocatalysts. In this study, a reusable copper-bismuth oxide/polyacrylonitrile (Cu-Bi2O3/PAN) fibrous mat was prepared by fast-process flame spray pyrolysis and electrospinning for photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB) dyes. The results confirmed a well-defined morphology of Cu-Bi2O3/PAN fibers and good coordination of flame-made Cu-Bi2O3 particles with the functional groups of PAN. The Cu-Bi2O3/PAN fibrous mat exhibits remarkable photocatalytic performance of 96.2% MB and 98.6% RhB degradation, with a reaction rate as high as about 4.5- and 10.2-times than that of flame-made Cu-Bi2O3 particles and PAN under neutral condition, even after 10 cycles. The Cu-Bi2O3/PAN exhibits complete degradation of MB and RhB in 90 and 150 min under alkaline and slightly acidic conditions, respectively. The synergistic effect of Cu-Bi2O3 and coordination bond between particles and functional groups of PAN promoted carrier migration, suppressed recombination of carriers and provided abundant radicals on the surface of the mat. Superoxide and hydroxyl radicals were the major active species involved in the degradation of RhB and MB, respectively. This work provides an insight into designing the Cu-metal-shuttle based photocatalysts to optimize fibrous mat application in water remediation.

Long-life zinc electrodes achieved by oxygen plasma functionalization

A facile oxygen plasma treatment strategy is proposed to promote zinc dendrite inhibition by modifying the surface oxygen functional groups. The plasma-treated zinc electrodes achieved an extended working lifespan of 3800 h with an average Coulombic efficiency of over 99% for 1000 cycles when applied in full batteries. This work provides great prospects for the fabrication of long-life zinc batteries for grid systems.

DOPO-Decorated Two-Dimensional MXene Nanosheets for Flame-Retardant, Ultraviolet-Protective, and Reinforced Polylactide Composites

This study presents a novel and facile strategy for fabricating fire-resistant, ultraviolet (UV)-shielding, and tensile-enhanced polylactide (PLA) composites using two-dimensional (2D) MXene (Ti₃C₂) flakes chemically modified with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The thermal and burning performances of PLA composites were demonstrated by the limiting oxygen index, UL-94 test, and cone calorimetry. The UV-shielding and tensile performances were also examined. The results revealed that PLA/Ti₃C₂-DOPO (3 wt %) displayed a V-0 rating in the UL-94 test. The enhancement against fire hazard was reflected by the significant reduction in the peak heat release rate (33.7%), total heat release (47%), peak CO production (58.8%), and total smoke production (41.7%). The improved fire-safety performance of the composites is attributed to the interplay of catalytic, barrier, and condensed effects of the Ti₃C₂-DOPO nanosheets in the PLA matrix. PLA/Ti₃C₂-DOPO also showed an increase (∼9%) in tensile strength and an "Excellent" level (UPF 50+) in the UV-protection assessment. In all, this study introduces a novel chemical modification strategy for 2D MXene flakes to fabricate multifunctional PLA composites, which are promising candidates for next-generation sustainable and protective plastic products.

Facile preparation of uniform polydopamine particles and its application as an environmentally friendly flame retardant for biodegradable polylactic acid

The demand for environmentally benign flame retardants for biodegradable polymers has become particularly necessary due to their inherently “green” nature. This work reports intrinsically non-toxic polydopamine (PDA) particles as an efficient and environmentally friendly flame retardant for polylactic acid (PLA). 5 wt% PDA loading resulted in a 22% reduction in the peak heat release rate, 34.7% increase in the fire performance index, and lower CO2 production compared to neat PLA. A limiting oxygen index (LOI) value of 27.5% and a V-2 rating was achieved in the UL-94 vertical burning test. Highly aggregated amorphous particulate char was formed with the increasing content of PDA, and a significant reduction in evolved pyrolysis gaseous products was achieved for the PLA/PDA composites as compared with control PLA. This work provides important insight into the potential commercial application of PDA alone as an efficiently green, environmentally benign flame retardant for bioplastic PLA.

Growing Poly(norepinephrine) Layer over Individual Nanoparticles To Boost Hybrid Perovskite Photocatalysts

To address the poor stability of lead halide perovskite nanoparticles (NPs), monodisperse methylammonium lead bromide (MAPbBr₃, M-PE) NPs were successfully encapsulated with a thin layer (10 nm) of poly(norepinephrine) (PNE) by in situ polymerization. The PNE layer endowed M-PE NPs with high structural stability against severe environmental conditions. Furthermore, the chemical interaction between M-PE and PNE facilitates the construction of the core@shell composite, as well as contributes to the enhanced light-harvesting capacity and improved photoelectronic conversion efficiency in photocatalytic activity. The encapsulated NP M-PE@PNE with a band gap of 2.04 eV degraded the organic pollutant of malachite green by 81% in less than 2 h under visible light, which was 4.5 times higher than pristine M-PE NPs. This work provides a practical approach to stabilize and boost the MAPbX₃ photocatalyst and carries enormous potential in wide engineering applications.

Simultaneous fire safety enhancement and mechanical reinforcement of poly(lactic acid) biocomposites with hexaphenyl (nitrilotris(ethane-2,1-diyl))tris(phosphoramidate)

Poly(lactic acid) (PLA) is an important bioplastic polymer with wide engineering applications, but has relatively low tensile strength and high susceptibility to flames. This manuscript reports the synthesis of a new cyclo-phosphorus-nitrogen flame retardant (FR) - hexaphenyl (nitrilotris(ethane-2,1-diyl))tris(phosphoramidate) (HNETP) for concurrent FR and tensile strength enhancement. ¹H, ¹³C Nuclear Magnetic Resonance and Fourier Transform Infra-red spectra showed that HNETP was successfully synthesized. The FR properties of PLA/HNETP composites were investigated, and the peak heat release rate (PHRR) reduced by ˜ 51.3%, total heat released (THR) ˜ 43.1%, and carbon monoxide (CO) production by ˜ 46.5% with 3 wt% HNETP loading. The fire performance index increased by ˜ 65.8%, while the fire growth index decreased by ˜ 56.7%. The tensile strength and the Young's Modulus improved to ˜ 67.4 and ˜ 87.8% respectively. A significant increase in limiting oxygen index (LOI) (32.5%) was attained with a V-0 rating in the vertical burning test. TG-IR study showed considerable reduction in pyrolysis gaseous products by the PLA/HNETP composites compared to PLA. Insignificant changes were observed in the glass transition and the melting temperature of PLA and PLA/HNETP biocomposites.

Interface decoration of exfoliated MXene ultra-thin nanosheets for fire and smoke suppressions of thermoplastic polyurethane elastomer

Thermoplastic polyurethane (TPU) has broad applications as lightweight materials due to its multiple advantages and unique properties. Nevertheless, toxicity emission under fire conditions remains a major concern, particularly in building fire scenarios. To circumvent the problem, it is imperative that an effective flame retardant is sought to suppress the flame and release of combustion/smoke products whilst maintaining the favorable material properties of TPU. In the current work, a simple method is proposed for the preparation and utilization of cetyltrimethyl ammonium bromide (CTAB) and tetrabutyl phosphine chloride (TBPC) modified Ti₃C₂ (MXene) ultra-thin nanosheets. During the cone calorimeter tests, significant reduction in peak heat release rate (51.2% and 52.2%), peak smoke production rate (57.1% and 57.4%), peak CO production (39.4% and 41.6%) and peak CO₂ production (49.7% and 51.7%) were recorded by the mere introduction of 2 wt.% CTAB-Ti₃C₂ and TBPC-Ti₃C₂ to TPU. These superior fire safety properties resulting from the significant reduction of the fire, smoke and toxicity hazards are attributed to the excellent dispersion, catalytic and barrier effect of Ti₃C₂ ultra-thin nanosheets in TPU. Future applications of exfoliated MXene nanosheets as flame retardant appear to be very promising.

Functionalization of MXene Nanosheets for Polystyrene towards High Thermal Stability and Flame Retardant Properties

Fabricating high-performance MXene-based polymer nanocomposites is a huge challenge because of the poor dispersion and interfacial interaction of MXene nanosheets in the polymer matrix. To address the issue, MXene nanosheets were successfully exfoliated and subsequently modified by long-chain cationic agents with different chain lengths, i.e., decyltrimethylammonium bromide (DTAB), octadecyltrimethylammonium bromide (OTAB), and dihexadecyldimethylammonium bromide (DDAB). With the long-chain groups on their surface, modified Ti3C2 (MXene) nanosheets were well dispersed in N,N-dimethylformamide (DMF), resulting in the formation of uniform dispersion and strong interfacial adhesion within a polystyrene (PS) matrix. The thermal stability properties of cationic modified Ti3C2/PS nanocomposites were improved considerably with the temperatures at 5% weight loss increasing by 20 °C for DTAB-Ti3C2/PS, 25 °C for OTAB-Ti3C2/PS and 23 °C for DDAB-Ti3C2/PS, respectively. The modified MXene nanosheets also enhanced the flame-retardant properties of PS. Compared to neat PS, the peak heat release rate (PHRR) was reduced by approximately 26.4%, 21.5% and 20.8% for PS/OTAB-Ti3C2, PS/DDAB-Ti3C2 and PS/DTAB-Ti3C2, respectively. Significant reductions in CO and CO2 productions were also obtained in the cone calorimeter test and generally lower pyrolysis volatile products were recorded by PS/OTAB-Ti3C2 compared to pristine PS. These property enhancements of PS nanocomposites are attributed to the superior dispersion, catalytic and barrier effects of Ti3C2 nanosheets.

Advances in Flame Retardant Poly(Lactic Acid)

PLA has become a commodity polymer with wide applications in a number of fields. However, its high flammability with the tendency to flow in fire has limited its viability as a perfect replacement for the petrochemically-engineered plastics. Traditional flame retardants, which may be incorporated into PLA without severely degrading the mechanical properties, are the organo-halogen compounds. Meanwhile, these compounds tend to bioaccumulate and pose a risk to flora and fauna due to their restricted use. Research into PLA flame retardants has largely focused on organic and inorganic compounds for the past few years. Meanwhile, the renewed interest in the development of environmentally sustainable flame retardants (FRs) for PLA has increased significantly in a bid to maintain the integrity of the polymer. A review on the development of new flame retardants for PLA is presented herein. The focus is on metal oxides, phosphorus-based systems, 2D and 1D nanomaterials, hyperbranched polymers, and their combinations, which have been applied for flame retarding PLA are discussed. The paper also reviews briefly the correlation between FR loadings and efficiency for various FR systems, and their effects on processing and mechanical properties.