Covalent immobilization of laccase by one pot three component reaction and its application in the decolorization of textile dyes

Cellulose / waste Cu2+-activated carbon composite: A sustainable and green material for boosting laccase activity and degradation of bisphenol A in wastewater

Low enzyme activity is one of the disadvantages of immobilized laccase. In this study, waste Cu2+-loaded activated carbon (Cu-AC) was successfully used in preparing a novel composite support，cellulose / Cu2+-loaded activated carbon beads (C / Cu-AC)， and effectively boosted immobilized laccase activity. To achieve optimum conditions for immobilization of laccase, the immobilization time, pH and laccase concentration were examined. The highest immobilized laccase activity (34.21 U/g) was achieved under optimum conditions (T = 4 h, pH = 4, C = 5 g/L), which was increased by 35.86 % compared to control. In addition, the immobilized laccase showed an outstanding performance in thermostability and reusability compared to free laccase. Moreover, the degradation of BPA by immobilized laccase was carried out, and the optimum degradation conditions were explored. Under such conditions: concentration of BPA was 75 mg / L and pH = 4, t = 1 h, T = 50 °C，the removal yield of BPA reached a maximum of 79.88 %. Therefore, the utilization of waste Cu-CA is a powerful method to boost immobilized laccase activity and creating a new way to high value treatment of waste Cu-CA.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Trametes versicolor Laccase-Based Magnetic Inorganic-Protein Hybrid Nanobiocatalyst for Efficient Decolorization of Dyes in the Presence of Inhibitors

In the present investigation, an ecofriendly magnetic inorganic-protein hybrid system-based enzyme immobilization was developed using partially purified laccase from Trametes versicolor (TvLac), Fe3O4 nanoparticles, and manganese (Mn), and was successfully applied for synthetic dye decolorization in the presence of enzyme inhibitors. After the partial purification of crude TvLac, the specific enzyme activity reached 212 U∙mg total protein-1. The synthesized Fe3O4/Mn3(PO4)2-laccase (Fe3O4/Mn-TvLac) and Mn3(PO4)2-laccase (Mn-TvLac) nanoflowers (NFs) exhibited encapsulation yields of 85.5% and 90.3%, respectively, with relative activities of 245% and 260%, respectively, compared with those of free TvLac. One-pot synthesized Fe3O4/Mn-TvLac exhibited significant improvements in catalytic properties and stability compared to those of the free enzyme. Fe3O4/Mn-TvLac retained a significantly higher residual activity of 96.8% over that of Mn-TvLac (47.1%) after 10 reuse cycles. The NFs showed potential for the efficient decolorization of synthetic dyes in the presence of enzyme inhibitors. For up to five reuse cycles, Fe3O4/Mn-TvLac retained a decolorization potential of 81.1% and 86.3% for Coomassie Brilliant Blue R-250 and xylene cyanol, respectively. The synthesized Fe3O4/Mn-TvLac showed a lower acute toxicity towards Vibrio fischeri than pure Fe3O4 nanoparticles did. This is the first report of the one-pot synthesis of biofriendly magnetic protein-inorganic hybrids using partially purified TvLac and Mn.

Recent Progress and Future Prospects of Laccase Immobilization on MOF Supports for Industrial Applications

Laccase is a multicopper oxidoreductase enzyme that can oxidize organics such as phenolic compounds. Laccases appear to be unstable at room temperature, and their conformation often changes in a strongly acidic or alkaline environment, making them less effective. Therefore, rationally linking enzymes with supports can effectively improve the stability and reusability of native enzymes and add important industrial value. However, in the process of immobilization, many factors may lead to a decrease in enzymatic activity. Therefore, the selection of a suitable support can ensure the activity and economic utilization of immobilized catalysts. Metal-organic frameworks (MOFs) are porous and simple hybrid support materials. Moreover, the characteristics of the metal ion ligand of MOFs can enable a potential synergistic effect with the metal ions of the active center of metalloenzymes, enhancing the catalytic activity of such enzymes. Therefore, in addition to summarizing the biological characteristics and enzymatic properties of laccase, this article reviews laccase immobilization using MOF supports, as well as the application prospects of immobilized laccase in many fields.

Hyperactivation of lipases by immobilization on superhydrophobic graphene quantum dots inorganic hybrid nanoflower

Various nanoflowers are synthesized for enzyme immobilization. In order to increase the activity of nanoflowers, in this study, 3D flower-like structured organic-inorganic hybrid nanoflowers (hNFs) with various lipases Rhizomucor miehei lipase (RML), Candida antarctica lipase B (CALB), Humicola insolens lipase (HIL), Thermomyces lanuginosus lipase (TLL), Eversa® Transform 2.0 (ET) a genetically modified enzyme derived of TLL and graphene quantum dots (GQDs) were prepared and characterized.Lipase hNFs [lipase-(Cu/Co)3(PO4)2] and lipase@GQDs hNFs [lipase@GQDs-(Cu/Co)3(PO4)2] were straightforwardly prepared through mixing with metal ion (Cu2+or Co2+) aqueous solutions with or without GQDs. The ET@GQDs-(Cu)3(PO4)2 hNFs demonstrated 687 % higher activity than ET-(Cu)3(PO4)2 hNFs and 650 % higher activity than the free ET. Similar results were also observed with other lipase hybrid nanoflowers. For example, TLL@GQDs-(Cu)3(PO4)2 hNFs exhibited a 557 % higher activity than TLL-(Cu)3(PO4)2 hNFs and a 463 % higher activity than free TLL. Additionally, TLL@GQDs-(Co)3(PO4)2 hNFs showed a 141 % higher activity than TLL-(Co)3(PO4)2 hNFs and a 304 % higher activity than free TLL. Upon examining pH and thermal stability, it was revealed that lipase@GQDs hNFs exhibited higher activity compared to free lipase and other hNFs without GQDs. The effect of metal ions, enzyme concentrations and amount of GQDs on the morphology and enzyme activity of the lipase-hNFs was examined.

Immobilized laccase: an effective biocatalyst for industrial dye degradation from wastewater

Environmental concerns due to the release of industrial wastewater contaminated with dyes are becoming more and more intense with the increasing industrialization. Decolorization of industrial effluents has become the top priority due to the continuous demand for color-free discharge into the receiving water bodies. Different dye removal techniques have been developed, among which biodegradation by laccase enzyme is competitive. Laccase, as a green catalyst, has a high catalytic activity, generates less toxic by-products, and has been extensively researched in the field of remediation of dyes. However, laccase's significant catalytic activity could only be achieved after an effective immobilization step. Immobilization helps strengthen and stabilize the protein structure of laccase, thus enhancing its functional properties. Additionally, the reusability of immobilized laccase makes it an attractive alternative to traditional dye degradation technologies and in the realistic applications of water treatment, compared with free laccase. This review has elucidated different methods and the carriers used to immobilize laccase. Furthermore, the role of immobilized laccase in dye remediation and the prospects have been discussed.

Elimination of tetracyclines in seawater by laccase-mediator system

Long-term exposure of antibiotics at low level leads to the accumulation of antibiotics in environmental media and organisms, inducing the formation of antibiotic resistance genes. Seawater is an important sink for many contaminants. Here, laccase from Aspergillus sp. And mediators that follow different oxidation mechanisms were combined to degrade tetracyclines (TCs) at environmentally relevant levels (ng·L^-1-μg·L^-1) in coastal seawater. The high salinity and alkaline of seawater changed the enzymatic structure of laccase, resulting in a reduced affinity of laccase to the substrate in seawater (K_m of 0.0556 mmol L^-1) than that in buffer (K_m of 0.0181 mmol L^-1). Although the stability and activity of the laccase decreased in seawater, laccase at a concentration of 200 U·L^-1 with a laccase/syringaldehyde (SA) ratio of 1 U: 1 μmol could completely degrade TCs in seawater at initial concentrations of less than 2 μg L^-1 in 2 h. Molecular docking simulation showed that the interaction between TCs and laccase mainly includes hydrogen bond interaction and hydrophobic interaction. TCs were degraded into small molecular products through a series of reactions: demethylation, deamination, deamidation, dehydration, hydroxylation, oxidation, and ring-opening. Prediction of the toxicity of intermediates showed that the majority of TCs can be degraded into low-toxic or non-toxic, small-molecule products within 1 h, indicating that the degradation process of TCs by a laccase-SA system has good ecological safety. The successful removal of TCs by the laccase-SA system demonstrates its potential for the elimination of pollutants in marine environment.

Biocatalytic stereoselective synthesis of pyrrolidine-2,3-diones containing all-carbon quaternary stereocenters

Highly functionalized pyrrolidine-2,3-diones can be synthesized efficiently and stereoselectively under mild conditions using a biocatalytic approach. The reaction led to the formation of new all-carbon quaternary stereocenters from Myceliophthora thermophila laccase (Novozym 51003) catalyzed oxidation of catechols to ortho-quinones and subsequent 1,4-addition with 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones. The reaction was conducted with various substituents on both reactants, resulting in 13 products in moderate to good yields (42-91%). The same 15 reactions were also tested with K₃Fe(CN)₆ as a catalyst, but here only one reaction resulted in a product (60% yield).

Isocyanide-based multi-component reactions for carrier-free and carrier-bound covalent immobilization of enzymes

Strategies for the covalent immobilization of enzymes depend on the type of functional group selected to perform the coupling reaction, and on the relative importance of selectivity, loading capacity, immobilization time and activity/stability of the resulting immobilized preparation. However, no single strategy is applicable for all covalent immobilization methods or can meet all these criteria, exemplifying the challenge of introducing a versatile process broadly compatible with the residues on the surface of proteins and the functional groups of common linkers. Here, we describe the use of isocyanide-based multi-component reactions for the carrier-bound and carrier-free covalent immobilization of enzymes. Isocyanide-based multi-component reactions can accept a wide variety of functional groups such as epoxy, acid, amine and aldehyde, as well as many commercially available bi-functional linkers, and are therefore suitable for either covalent coupling of enzymes on a solid support or intermolecular cross-linking of enzymes. In this strategy, an isocyanide is directly added to the reaction medium, the enzyme supplies either the exposed amine or carboxylic acid groups, and the support (in carrier-bound immobilization) or the bi-functional cross-linking agent (in carrier-free immobilization) provides another reactive functional group. The protocol offers operational simplicity, high efficiency and a notable reduction in time over alternative strategies, and can be performed by users with expertise in chemistry or biology. The immobilization reactions typically require 1-24 h.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Impact of textile dyes on health and ecosystem: a review of structure, causes, and potential solutions

The rapid growth of population and industrialization have intensified the problem of water pollution globally. To meet the challenge of industrialization, the use of synthetic dyes in the textile industry, dyeing and printing industry, tannery and paint industry, paper and pulp industry, cosmetic and food industry, dye manufacturing industry, and pharmaceutical industry has increased exponentially. Among these industries, the textile industry is prominent for the water pollution due to the hefty consumption of water and discharge of coloring materials in the effluent. The discharge of this effluent into the aquatic reservoir affects its biochemical oxygen demand (BOD), chemical oxygen demand (COD), total dissolved solids (TDS), total suspended solids (TSS), and pH. The release of the effluents without any remedial treatment will generate a gigantic peril to the aquatic ecosystem and human health. The ecological-friendly treatment of the dye-containing wastewater to minimize the detrimental effect on human health and the environment is the need of the hour. The purpose of this review is to evaluate the catastrophic effects of textile dyes on human health and the environment. This review provides a comprehensive insight into the dyes and chemicals used in the textile industry, focusing on the typical treatment processes for their removal from industrial wastewaters, including chemical, biological, physical, and hybrid techniques.

Diarylation of thiazolopyrimidines by laccase and their in vitro evaluation as antitumor agents

A mild and efficient method was developed for the synthesis of new derivatives of thiazolo[3,2-a] pyrimidin-3(2H)-ones from available starting materials based on the oxidation of catechols to ortho-quinone by Myceliophthora thermophila laccase (Novozym 51,003) and 1,4-addition of active methylene carbon to these in situ generated intermediates in moderate to good yields (35-93%). The structure of the products was confirmed through ¹H NMR, ¹³C NMR, HMBC, HSQC, DEPT-135, and mass spectroscopy techniques. These novel compounds were evaluated as active antitumor agents against human colorectal adenocarcinoma and liver adenocarcinoma cell lines. All compounds displayed potent inhibition activities against the HT-29 cell line with IC₅₀ values of 9.8-35.9 µM, superior to the positive control doxorubicin, and most showed potent anticancer activities against the HepG2 cell line.

Four Decades of Laccase Research for Wastewater Treatment: Insights from Bibliometric Analysis

Increasing trends of environmental pollution and emerging contaminants from anthropogenic activities have urged researchers to develop innovative strategies in wastewater management, including those using the biocatalyst laccase (EC 1.10.3.2). Laccase works effectively against a variety of substrates ranging from phenolic to non-phenolic compounds which only require molecular oxygen to be later reduced to H2O as the final product. In this study, we performed a bibliometric analysis on the metadata of literature acquired through the Scopus database (24 October 2022) with keyword combination "Laccase" AND "Pollutant" OR "Wastewater". The included publications were filtered based on year of publication (1978-2022), types of articles (original research articles and review articles) and language (English). The metadata was then exported in a CSV (.csv) file and visualized on VosViewer software. A total of 1865 publications were identified, 90.9% of which were original research articles and the remaining 9.1% were review articles. Most of the authors were from China (n = 416; 22.3%) and India (n = 276; 14.79%). In the case of subject area, 'Environmental Science' emerged with the highest published documents (n = 1053; 56.46%). The identified papers mostly cover laccase activity in degrading pollutants, and chitosan, which can be exploited for the immobilization. We encourage more research on laccase-assisted wastewater treatment, especially in terms of collaborations among organizations.

Design of laccase-metal-organic framework hybrid constructs for biocatalytic removal of textile dyes

This study aims to present a simple and effective carrier matrix to immobilize laccase as opposed to complex and tedious immobilization processes and also to use it in the removal of textile dyes. For this purpose, Cobalt (Co) and Copper (Cu) based metal-organic frameworks (MOFs) were prepared and laccase was immobilized on two different MOFs via encapsulation. The characterization outcomes showed that laccase was well immobilized into MOF supports. Optimum pH and temperature were found for Lac/Co-MOF (pH 4.5 at 50 °C) and Lac/Cu-MOF (pH 5.0 at 50 °C). The Km (0.03 mM) and Vmax (97.4 μmol/min) values of Lac/Cu-MOF were lower than those of Lac/Co-MOF (Km = 0.13 mM, Vmax = 230.7 μmol/min). The immobilized laccases showed good reusability as well as improved resistance to temperature denaturation and high storage stability. For instance, the Lac/Co-MOF and Lac/Cu-MOF retained more than 58% activity after 4 weeks of storage at room temperature. Meanwhile, Lac/Co-MOF and Lac/Cu-MOF maintained 56.5% and 55.8% of their initial activity, respectively, after 12 reuse cycles. Moreover, thermal deactivation kinetic studies of immobilized laccases displayed lower k value, higher t_1/2, and enhancement of thermodynamic parameters, which means better thermostability. Finally, the decolorization activities for the Lac/Co-MOF were 78% and 61% at the 5th cycle for Reactive Blue 171 and Reactive Blue 198, respectively. In conclusion, it can be inferred that the MOFs are more sustainable and beneficial support for laccase immobilization and they can be efficient for removing textile dyes from industrial wastes.

Immobilized fungal enzymes: Innovations and potential applications in biodegradation and biosynthesis

Microbial enzymes catalyze various reactions inside and outside living cells. Among the widely studied enzymes, fungal enzymes have been used for some of the most diverse purposes, especially in bioremediation, biosynthesis, and many nature-inspired commercial applications. To improve their stability and catalytic ability, fungal enzymes are often immobilized on assorted materials, conventional as well as nanoscale. Recent advances in fungal enzyme immobilization provide effective and sustainable approaches to achieve improved environmental and commercial outcomes. This review aims to provide a comprehensive overview of commonly studied fungal enzymes and immobilization technologies. It also summarizes recent advances involving immobilized fungal enzymes for the degradation or assembly of compounds used in the manufacture of products, such as detergents, food additives, and fossil fuel alternatives. Furthermore, challenges and future directions are highlighted to offer new perspectives on improving existing technologies and addressing unexplored fields of applications.

Immobilization of Trametes versicolor laccase on chitosan/halloysite as a biocatalyst in the Remazol Red RR dye

In this study, the laccase obtained from Trametes versicolor was immobilized onto the chitosan(CTS)/halloysite (HNT) beads. In the immobilization step, the effects of chitosan (1-3% w/v), halloysite (0-2% w/v), glutaraldehyde (0.5-1.5% v/v) and enzyme concentrations (1-3%) on loading and immobilization efficiency were investigated. SEM, FT-IR, XRD, TGA and XPS analyses were performed to examine the structure of beads. In addition, the effects of parameters such as pH (4-10), temperature (25-55 °C), storage life on the activity of free and immobilized laccase were also investigated. The activities of free and immobilized laccase preserved 23% and 56% of its initial activity at the end of 59 days of storage. The effects of mediators such as 2.2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS), 1-Hydroxybenzotriazole hydrate (HBT), 2,2,6,6-Tetramethyl-1-piperidinyloxy (TEMPO) and violuric acid (VLA) on the dye removal efficiency were investigated. Reusability of the CTS/HNT/Lac in the presence of HBT and VLA mediators, which enable the highest dye removal, was tested. After 15 cycles, 42% and 54% dye removal were achieved with the CTS/HNT/Lac in the medium containing HBT and VLA, and 42% and 49% of the activity is preserved, respectively. This study showed that CTS/HNT/Lac can be used repeatedly for Remazol Red RR dye removal.

Purification and Characterization of a Thermo- and pH-Stable Laccase From the Litter-Decomposing Fungus Gymnopus luxurians and Laccase Mediator Systems for Dye Decolorization

An extracellular laccase (GLL) was purified from fermentation broth of the litter-decomposing fungus Gymnopus luxurians by four chromatography steps, which resulted in a high specific activity of 118.82 U/mg, purification fold of 41.22, and recovery rate of 42.05%. It is a monomeric protein with a molecular weight of 64 kDa and N-terminal amino acid sequence of AIGPV TDLHI, suggesting that GLL is a typical fungal laccase. GLL demonstrated an optimum temperature range of 55°C-65°C and an optimum pH 2.2 toward 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). It displayed considerably high thermostability and pH stability with about 63% activity retained after 24 h at 50°C, and 86% activity retained after 24 h at pH 2.2, respectively. GLL was significantly enhanced in the presence of K+, Na+, and Mg2+ ions. It demonstrated K m of 539 μM and k cat /K m of 140 mM-1⋅s-1 toward ABTS at pH 2.2 and 37°C. Acetosyringone (AS) and syringaldehyde (SA) were the optimal mediators of GLL (0.4 U/ml) for dye decolorization with decolorization rates of about 60%-90% toward 11 of the 14 synthetic dyes. The optimum reaction conditions were determined to be mediator concentration of 0.1 mM, temperature range of 25°C -60°C, and pH 4.0. The purified laccase was the first laccase isolated from genus Gymnopus with high thermostability, pH stability, and effective decolorization toward dyes, suggesting that it has potentials for textile and environmental applications.

Rational engineering of the lccβ T. versicolor laccase for the mediator-less oxidation of large polycyclic aromatic hydrocarbons

•

Computational-assisted protein engineering of the binding pocket of laccases.

•

Mutants have activity increased up to ~ 300% in a broader pH range compared to the WT.

•

Enhanced activity towards bulky PAHs in comparison to the WT enzyme.

•

Ability to oxidize harmful PAH model compounds (dyes) that the WT enzyme cannot modify.

•

Higher oxidation levels without mediators compared to the WT laccase with mediators.

Laccases are among the most sought-after biocatalyst for many green applications, from biosensors to pollution remedial, because they simply need oxygen from the air to oxidize and degrade a broad range of substrates. However, natural laccases cannot process large and toxic polycyclic aromatic hydrocarbons (PAHs) except in the presence of small molecules, called mediators, which facilitate the reaction but are inconvenient for practical on-field applications. Here we exploited structure-based protein engineering to generate rationally modified fungal laccases with increased ability to process bulky PAHs even in a mediator-less reaction. Computational simulations were used to estimate the impact of mutations in the enzymatic binding pocket on the ability to bind and oxidize a selected set of organic compounds. The most promising mutants were produced and their activity was evaluated by biochemical assays with phenolic and non-phenolic substrates. Mutant laccases engineered with a larger binding pocket showed enhanced activity (up to ~ 300% at pH 3.0) in a wider range of pH values (3.0–8.0) in comparison to the wild type enzyme. In contrast to the natural laccase, these mutants efficiently degraded bulky and harmful triphenylmethane dyes such as Ethyl Green (up to 91.64% after 24 h), even in the absence of mediators, with positive implications for the use of such modified laccases in many green chemistry processes (e.g. wastewater treatment).

Co-immobilization of laccase and ABTS onto amino-functionalized ionic liquid-modified magnetic chitosan nanoparticles for pollutants removal

This work aims to achieve the co-immobilization of laccase and 2,2-binamine-di-3-ethylbenzothiazolin-6-sulfonic acid (ABTS) to improve removal capability of the biocatalyst for pollutants while avoiding potential pollution caused by ABTS. The laccase was immobilized on magnetic chitosan nanoparticles modified with amino-functionalized ionic liquid containing ABTS (MACS-NIL) based on Cu ion chelation (MACS-NIL-Cu-lac). The carrier was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, x-ray diffraction and etc., and electron paramagnetic resonance confirmed the mediator molecule ABTS on the carrier could also play the role of electron transmission. MACS-NIL-Cu-lac presented relatively high immobilization capacity, enhanced activity (1.7-fold that of free laccase), improved pH and temperature adaptability, and increased thermal and storage stability. The removal performance assay found that MACS-NIL-Cu-lac had a good removal efficiency with 100.0 % for 2,4-dichlorophenol in water at 25 °C, even when the concentration reached 50 mg/L. Reusability study showed that after six catalytic runs, the removal efficiency of 2,4-dichlorophenol by MACS-NIL-Cu-lac could still reach 93.2 %. Additionally, MACS-NIL-Cu-lac exhibited higher catalytic efficiencies with 100.0 %, 70.5 % and 93.3 % for bisphenol A, indole, and anthracene, respectively. The high catalytic performance in pure water system obtained by the novel biocatalyst co-immobilizing laccase and electron mediator ABTS showed greater practical application value.

A novel approach to efficient degradation of indole using co-immobilized horseradish peroxidase-syringaldehyde as biocatalyst

Biocatalytic degradation technology has received a great deal of attention in water treatment because of its advantages of high efficiency, environmental friendliness, and no secondary pollution. Herein, for the first time, horseradish peroxidase and mediator syringaldehyde were co-immobilized into functionalized calcium alginate composite beads grafted with glycidyl methacrylate and dopamine. The resultant biocatalyst of the co-immobilized horseradish peroxidase-syringaldehyde system has displayed excellent catalytic performance to degrade indole in water. The degradation rate of 100% was achieved in the presence of hydrogen peroxide even if the indole concentration was changing from 25 mg/L to 500 mg/L. If only the free enzyme was used under the identical water treatment conditions, the degradation of indole could hardly be observed even when the concentration of indole is low at 25 mg/L. This was attributed to the effective co-immobilization of the enzyme and the mediator so that the catalytic activity of horseradish peroxidase and the synergistic catalytic action of syringaldehyde could be fully developed. Furthermore, while the spherical catalyst was operated in succession and reused for four cycles in 50 mg/L indole solution, the degradation rate remained 91.8% due to its considerable reusability. This research demonstrated and provided a novel biocatalytic approach to degrade indole in water by the co-immobilized horseradish peroxidase-syringaldehyde system as biocatalyst.

Improvement of biodiesel production from palm oil by co-immobilization of Thermomyces lanuginosa lipase and Candida antarctica lipase B: Optimization using response surface methodology

Candida antarctica lipase B (CALB) and Thermomyces lanuginose lipase (TLL) were co-immobilized on epoxy functionalized silica gel via an isocyanide-based multicomponent reaction. The immobilization process was carried out in water (pH 7) at 25 °C, rapidly (3 h) resulting in high immobilization yields (100%) with a loading of 10 mg enzyme/g support. The immobilized preparations were used to produce biodiesel by transesterification of palm oil. In an optimization study, response surface methodology (RSM) and central composite rotatable design (CCRD) methods were used to study the effect of five independent factors including temperature, methanol to oil ratio, t-butanol concentration and CALB:TLL ratio on the yield of biodiesel production. The optimum combinations for the reaction were CALB:TLL ratio (2.1:1), t-butanol (45 wt%), temperature (47 °C), methanol: oil ratio (2.3). This resulted in a FAME yield of 94%, very close to the predicted value of 98%.

Enhancement of laccase immobilization onto wet chitosan microspheres using an iterative protocol and its potential to remove micropollutants

This study was focused on creating a new and effective immobilization method for Trametes versicolor laccase (Lc) by using chitosan (CS) microspheres activated with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride. The activation of the support alternated with immobilization of the enzyme, in repetitive procedures, led to obtaining three different products. Also, the physicochemical properties of the new products were investigated and compared with those of free laccase. The discoloration and reusability properties of the immobilized Lc were evaluated using indigo carmine (IC) as a model micropollutant. The ESEM and FT-IR methods demonstrated that the Lc was successfully immobilized. The relative reaction rate and the total amount of immobilized Lc were tripled using the iterative protocol as proved by specific and Bradford assays. The maximum amount of immobilized Lc was 8.4 mg Lc/g CS corresponding to the third immobilization procedure. Compared to the free Lc, the operational stability of the immobilized Lc was significantly improved, presenting a maximum activity plateau over a pH range of 3-5 and a temperature range of 25-50 °C. The thermal inactivation study at 55 °C proved that the immobilized enzyme is three times more stable than the free Lc. The isoconversional and Michaelis-Menten methods showed that the immobilization did not affect the enzyme catalytic properties. After 32 days of storage, the residual activities are 85% for the immobilized laccase and 40% for the free one. In similar conditions, the free and immobilized Lc (2.12 x 10^-6 M) completely decolorized IC (7.15 x 10^-5 M) within 14 min. The immobilized Lc activity remained almost constant (80%) during 10 reusability cycles. All these results highlight the substantial advantages of the new immobilization protocol and demonstrate that immobilized Lc can be used as a promising micropollutant removal from real wastewater.

Current Development in Decolorization of Synthetic Dyes by Immobilized Laccases

The world today is in a quest for new means of environmental remediation as the methods currently used are not sufficient to halt the damage. Mostly, a global direction is headed toward a shift from traditional chemical-based methods to a more ecofriendly alternative. In this context, biocatalysis is seen as a cost-effective, energy saving, and clean alternative. It is meant to catalyze degradation of recalcitrant chemicals in an easy, rapid, green, and sustainable manner. One already established application of biocatalysis is the removal of dyes from natural water bodies using enzymes, notably oxidoreductases like laccases, due to their wide range of substrate specificity. In order to boost their catalytic activity, various methods of enhancements have been pursued including immobilization of the enzyme on different support materials. Aside from increased catalysis, immobilized laccases have the advantages of higher stability, better durability against harsh environment conditions, longer half-lives, resistance against protease enzymes, and the ability to be recovered for reuse. This review briefly outlines the current methods used for detoxification and decolorization of dye effluents stressing on the importance of laccases as a revolutionary biocatalytic solution to this environmental problem. This work highlights the significance of laccase immobilization and also points out some of the challenges and opportunities of this technology.

Hyperstabilization of a thermophile bacterial laccase and its application for industrial dyes degradation

In the present study, a novel extracellular laccase isolated from Geobacillus stearothermophilus ATCC 10149 was entrapped in a bionanocomposite matrix consisting of copper alginate (Cu-alginate) supplemented with the nanoclay bentonite. After optimization, this nanobiocatalyst was able to degrade up to 90% of Remazol Brilliant Blue R (RBBR) without the addition of redox mediators and retained 70% of its initial activity for at least 1440 h, equivalent to more than 288 uses. The incorporation of nanoclay allowed alginate beads to be used in alkaline pH and strengthened its mechanical properties. Besides, this thermophilic laccase was able to decolorize other structurally different synthetic dyes such as Methyl Orange, Malachite Green and Indigo Carmine. These preliminary results suggested that the nanobiocatalyst could be a suitable option for dye decolorization and be further developed for large scale bioremediation of toxic dyes.

A synergistic combination of shrimp shell derived chitosan polysaccharide with Citrus sinensis peel extract for the development of colourful and bioactive cellulosic textile

Green finishing formulations have established an important place in textile dyeing and finishing industry. The use of plant extracts along with chemical metallic mordants is reported to increase colour values and improve fastness properties. However, metal salts as mordants constantly pose environmental and human health risks. The purpose of this work is to examine and extend the knowledge of natural dyeing technology considering the use of biological macromolecule chitosan (CS) to increase dye uptake, fastness and impart functional properties. The cotton was pre-coated with chitosan using pad-dry method and optimal chitosan concentrations were selected by evaluating the colour spectrometry data in term of CIEL*a*b* values. The chemical nature of the extract was characterized by UV-Vis, Fourier-transform infrared spectroscopy (FT-IR) and Thermogravimetric analysis (TGA) whereas dyed samples were analysed by Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) with mapping analysis, FT-IR, and TGA. Results showed that the aqueous extract of Citrus sinensis peel yielded interestingly shades all lying in yellow- red quadrant of CIELa*b* colour space with acceptable grades of wash and dry-wet fastness properties. This study reveals important information to understand synergism between two natural products in imparting semi durable antioxidant and antibacterial activity against E. coli and S. aureus, and thus offers full potential to be used in natural dyeing technology.

The status of isocyanide-based multi-component reactions in Iran (2010-2018)

Isocyanides as key intermediates and magic reactants have been widely applied in organic reactions for direct access to a broad spectrum of remarkable organic compounds. Although the history of these magical compounds dates back more than 100 years, it still has been drawing widespread attention of chemists who confirmed their versatility and effectiveness. Because of their wide spectrum of pharmacological, industrial and synthetic applications, many reactions with the utilization of isocyanides are reported in the literature. In this context, Iranian scientist played a significant role in the growth of isocyanides chemistry. The present review article covers literature from the period starting from 2010 onward and encompasses new synthetic routes and organic transformation involving isocyanides by Iranian researchers. During this period, a diverse range of isocyanide-based multi-component reactions (I-MCRs) has been reported such as a new modification of Ugi, post-Ugi, Passerini and Groebke-Blackburn-Bienayme condensation reactions, isocyanide-based [1 + 4] cycloaddition reactions, isocyanide-acetylene-based MCRs, isocyanide and Meldrum's acid-based MCRs, several unexpected reactions besides green mediums and novel catalytic systems for the synthesis of diverse kinds of pharmaceutically and industrially remarkable heterocyclic and linear organic compounds. This review also emphasizes the neoteric applications of I-MCR for the synthesis of valuable peptide and pseudopeptide scaffolds, enzyme immobilization and functionalization of materials with tailorable properties that can play important roles in the plethora of applications.

Soluble enzyme cross-linking via multi-component reactions: a new generation of cross-linked enzymes

Production of CLEs using a multi-component reaction.

Applications of Microbial Laccases: Patent Review of the Past Decade (2009–2019)

There is a high number of well characterized, commercially available laccases with different redox potentials and low substrate specificity, which in turn makes them attractive for a vast array of biotechnological applications. Laccases operate as batteries, storing electrons from individual substrate oxidation reactions to reduce molecular oxygen, releasing water as the only by-product. Due to society’s increasing environmental awareness and the global intensification of bio-based economies, the biotechnological industry is also expanding. Enzymes such as laccases are seen as a better alternative for use in the wood, paper, textile, and food industries, and they are being applied as biocatalysts, biosensors, and biofuel cells. Almost 140 years from the first description of laccase, industrial implementations of these enzymes still remain scarce in comparison to their potential, which is mostly due to high production costs and the limited control of the enzymatic reaction side product(s). This review summarizes the laccase applications in the last decade, focusing on the published patents during this period.

Hazardous contaminants in the environment and their laccase-assisted degradation - A review

In recent years, owing to the serious ecological risks and human health-related adverse effects, the wide occurrence of hazardous contaminants along with their potential to enter the environment have gained great public concerns. In this context, significant actions are urgently required to tackle the ignorance and inefficient monitoring/removal of emerging/(re)-emerging contaminants (ECs) in the environment from different routes of concerns, i.e., industrial waste, pharmaceutical, personal care products (PCPs), toxic effluents, etc. Laccases are multinuclear copper-containing oxidoreductases and can carry out one electron oxidation of a broad spectrum of environmentally related contaminants. In biotechnology, this group of versatile enzymes is known as a green catalyst/green tool with enormous potentialities to tackle ECs of high concern. In this review, we endeavored to present up-to-date literature concerning the potential use of immobilized laccases for the degradation and remediation of various types of environmental pollutants present in the environment. Both, pristine and immobilized, laccases have shown great capacity to oxidative degradation and mineralization of endocrine disrupting chemicals (EDs) in batch treatment processes as well as in large-scale continuous reactors. These properties make laccase as particularly attractive biocatalysts in environmental remediation processes, and their use might be advantageous over the conventional treatments. This review summarizes the most significant recent advances in the use of laccases and their future perspectives in environmental biotechnology.