Design of photodynamic chitosan hydrogels bearing phthalocyanine-colistin conjugate as an antibacterial agent

Recent progress in hydrogels combined with phototherapy for bacterial infection: A review

Phototherapy has become one of the most effective antibacterial methods due to its associated lack of drug resistance and its good antibacterial effect. For the purpose of avoiding the aggregation and premature release of photosensitive/photothermal agents during phototherapy, they can be mixed into three-dimensional hydrogels. The combination of hydrogels and phototherapy combines the merits of both hydrogels and phototherapy, overcomes the disadvantages of traditional antibacterial methodologies, and has broad application prospects. This review presents recent advancements in phototherapeutic antibacterial hydrogels including photodynamic antibacterial hydrogels, photothermal antibacterial hydrogels, photodynamic and photothermal synergistic antibacterial hydrogels, and other synergistic antibacterial hydrogels involving phototherapy.

Antitumor Immunity Mediated by Photodynamic Therapy Using Injectable Chitosan Hydrogels for Intratumoral and Sustained Drug Delivery

Photodynamic therapy (PDT) is an anticancer therapy with proven efficacy; however, its application is often limited by prolonged skin photosensitivity and solubility issues associated with the phototherapeutic agents. Injectable hydrogels which can effectively provide intratumoral delivery of photosensitizers with sustained release are attracting increased interest for photodynamic cancer therapies. However, most of the hydrogels for PDT applications are based on systems with high complexity, and often, preclinical validation is not provided. Herein, we provide a simple and reliable pH-sensitive hydrogel formulation that presents appropriate rheological properties for intratumoral injection. For this, Temoporfin (m-THPC), which is one of the most potent clinical photosensitizers, was chemically modified to introduce functional groups that act as cross-linkers in the formation of chitosan-based hydrogels. The introduction of -COOH groups resulted in a water-soluble derivative, named PS2, that was the most promising candidate. Although PS2 was not internalized by the target cells, its extracellular activation caused effective damage to the cancer cells, which was likely mediated by lipid peroxidation. The injection of the hydrogel containing PS2 in the tumors was monitored by high-frequency ultrasounds and in vivo fluorescence imaging which confirmed the sustained release of PS2 for at least 72 h. Following local administration, light exposure was conducted one (single irradiation protocol) or three (multiple irradiation protocols) times. The latter delivered the best therapeutic outcomes, which included complete tumor regression and systemic anticancer immune responses. Immunological memory was induced as ∼75% of the mice cured with our strategy rejected a second rechallenge with live cancer cells. Additionally, the failure of PDT to treat immunocompromised mice bearing tumors reinforces the relevance of the host immune system. Finally, our strategy promotes anticancer immune responses that lead to the abscopal protection against distant metastases.

Photodynamic therapy for the treatment of Pseudomonas aeruginosa infections: A scoping review

BACKGROUND

Pseudomonas aeruginosa is a Gram-negative bacillus that causes superficial and deep infections, which can be minor to life-threatening. Recently, P. aeruginosa has gained significant relevance due to the increased incidence of multidrug-resistant (MDR) strains that complicate antibiotic treatment. Due to MDR strains, alternative therapies, such as antimicrobial photodynamic therapy (PDT), are presented as a good option to treat nonsystemic infections. PDT combines a photosensitizer agent (PS), light, and oxygen to generate free radicals that destroy bacterial structures such as the envelope, matrix, and genetic material. This work aimed to identify the development stage of the PDT applied to P. aeruginosa to conclude which research stage should be emphasized more.

METHODS

Systematic bibliographic search in various public databases was performed. Related articles were identified using keywords, and relevant ones were selected using inclusion and exclusion criteria according to the PRISMA protocol.

RESULTS

We found 29 articles that meet the criteria, constituting a good body of evidence associated with using PDT against P. aeruginosa in vitro and less developed for in vivo research.

CONCLUSIONS

We conclude that PDT could become an effective adjunct to antimicrobial therapy against P. aeruginosa. This effectiveness depends on the PS used and the location of the infection. Many PS already demonstrated efficacy in PDT, but the evidence is supported significantly by in vitro and very few in vivo studies. Therefore, we conclude that further research efforts should focus on demonstrating the safety and efficacy of these PSs in vivo in animal infection models.

Chitosan and Its Derivatives: Preparation and Antibacterial Properties

This comprehensive review illuminates the various methods of chitosan extraction, its antibacterial properties, and its multifarious applications in diverse sectors. We delve into chemical, physical, biological, hybrid, and green extraction techniques, each of which presents unique advantages and disadvantages. The choice of method is dictated by multiple variables, including the desired properties of chitosan, resource availability, cost, and environmental footprint. We explore the intricate relationship between chitosan's antibacterial activity and its properties, such as cationic density, molecular weight, water solubility, and pH. Furthermore, we spotlight the burgeoning applications of chitosan-based materials like films, nanoparticles, nonwoven materials, and hydrogels across the food, biomedical, and agricultural sectors. The review concludes by highlighting the promising future of chitosan, underpinned by technological advancements and growing sustainability consciousness. However, the critical challenges of optimizing chitosan's production for sustainability and efficiency remain to be tackled.

Advances in preparation and application of antibacterial hydrogels

Bacterial infections, especially those caused by drug-resistant bacteria, have seriously threatened human life and health. There is urgent to develop new antibacterial agents to reduce the problem of antibiotics. Biomedical materials with good antimicrobial properties have been widely used in antibacterial applications. Among them, hydrogels have become the focus of research in the field of biomedical materials due to their unique three-dimensional network structure, high hydrophilicity, and good biocompatibility. In this review, the latest research progresses about hydrogels in recent years were summarized, mainly including the preparation methods of hydrogels and their antibacterial applications. According to their different antibacterial mechanisms, several representative antibacterial hydrogels were introduced, such as antibiotics loaded hydrogels, antibiotic-free hydrogels including metal-based hydrogels, antibacterial peptide and antibacterial polymers, stimuli-responsive smart hydrogels, and light-mediated hydrogels. In addition, we also discussed the applications and challenges of antibacterial hydrogels in biomedicine, which are expected to provide new directions and ideas for the application of hydrogels in clinical antibacterial therapy.

Abundant tannic acid modified gelatin/sodium alginate biocomposite hydrogels with high toughness, antifreezing, antioxidant and antibacterial properties

The acidity of high tannic acid (TA) content solution can destroy the structure of protein, such as gelatin (G). This causes a big challenge to introduce abundant TA into the G-based hydrogels. Here, the G-based hydrogel system with abundant TA as hydrogen bonds provider was constructed by a "protective film" strategy. The protective film around the composite hydrogel was first formed by the chelation of sodium alginate (SA) and Ca2+. Subsequently, abundant TA and Ca2+ were successively introduced into the hydrogel system by immersing method. This strategy effectively protected the structure of the designed hydrogel. After treatment with 0.3 w/v TA and 0.06 w/v Ca2+ solutions, the tensile modulus, elongation at break and toughness of G/SA hydrogel increased about 4-, 2-, and 6-fold, respectively. Besides, G/SA-TA/Ca2+ hydrogels exhibited good water retention, anti-freezing, antioxidant, antibacterial properties and low hemolysis ratio. Cell experiments showed that G/SA-TA/Ca2+ hydrogels possessed good biocompatibility and could promote cell migration. Therefore, G/SA-TA/Ca2+ hydrogels are expected to be used in the field of biomedical engineering. The strategy proposed in this work also provides a new idea for improving the properties of other protein-based hydrogels.

Construction of chitosan-based thermosensitive composite hydrogels for recognizing and combined chemo-photodynamic elimination of Gram-negative bacterial infections

Recently, rapid acquisition of bacterial resistance and consequent slow healing of infected wounds threaten human life and health. In this study, chitosan-based hydrogels and nanocomplexes ZnPc(COOH)₈:PMB composed of photosensitizer ZnPc(COOH)₈ and antibiotic polymyxin B (PMB) were integrated into a thermosensitive antibacterial platform ZnPc(COOH)₈:PMB@gel. Interestingly, fluorescence and reactive oxygen species (ROS) of ZnPc(COOH)₈:PMB@gel can be triggered by E. coli bacteria at 37 °C, but not by S. aureus bacteria, which gave the potential to simultaneously detect and treat Gram-negative bacteria. The survival rate for a certain amount of E. coli bacteria treated with ZnPc(COOH)₈:PMB (ZnPc(COOH)₈ 2 μM) was decreased by approximately fivefold than that with either ZnPc(COOH)₈ or PMB alone, indicating combined antibacterial efficacy. ZnPc(COOH)₈:PMB@gel facilitated the complete healing of wounds infected with E. coli bacteria in about seven days, while over 10 % wounds treated with ZnPc(COOH)₈ or PMB remained unhealed on the 9th day. ZnPc(COOH)₈:PMB resulted in a threefold increase of ZnPc(COOH)₈ fluorescence in E. coli bacteria suggesting enhanced uptake of ZnPc(COOH)₈ for the intervention of PMB on membrane permeability. The construction principle of the thermosensitive antibacterial platform and the combined antimicrobial strategy can be applied to other photosensitizers and antibiotics for detection and treatment of wound infections.

Photosensitive Chitosan-Based Injectable Hydrogel Chemically Cross-Linked by Perylene Bisimide Dopamine with Robust Antioxidant and Cytotoxicity Enhancer Properties for In Vitro Photodynamic Therapy of Breast Cancer

Here, we report the fabrication of an antioxidant photosensitizing hydrogel system based on chitosan (CS-Cy/PBI-DOPA) covalently cross-linked with perylene bisimide dopamine (PBI-DOPA) as a photosensitizer. The severe insolubility and low tumor selectivity limitations of perylene were overcome by conjugation with dopamine and then to the chitosan hydrogel. The mechanical and rheological study of CS-Cy/PBI-DOPA photodynamic antioxidant hydrogels illustrated interconnected microporous morphologies with high elasticity, swelling ability, and suitable shear-thinning behavior. Bio-friendly properties, such as biodegradability and biocompatibility, excellent singlet oxygen production abilities, and antioxidant properties were also delivered. The antioxidant effects of the hydrogels control the physiological levels of reactive oxygen species (ROS) generated by photochemical reactions in photodynamic therapy (PDT), which are responsible for oxidative damage to tumor cells while protecting normal cells and tissues from ROS damage, including blood and endothelial cells. In vitro, PDT tests of hydrogels were conducted on two human breast cancer cell lines, MDA-MB-231 and MCF-7. These hydrogels offered more than 90% cell viability in the dark and good photocytotoxicity performance with 53 and 43% cell death for MCF-7 and MDA-MB-231 cells, which confirmed their promising potential for cancer therapeutic applications.

Recent advances in engineered polymeric materials for efficient photodynamic inactivation of bacterial pathogens

Nowadays, infectious diseases persist as a global crisis by causing significant destruction to public health and the economic stability of countries worldwide. Especially bacterial infections remain a most severe concern due to the prevalence and emergence of multi-drug resistance (MDR) and limitations with existing therapeutic options. Antibacterial photodynamic therapy (APDT) is a potential therapeutic modality that involves the systematic administration of photosensitizers (PSs), light, and molecular oxygen (O₂) for coping with bacterial infections. Although the existing porphyrin and non-porphyrin PSs were effective in APDT, the poor solubility, limited efficacy against Gram-negative bacteria, and non-specific distribution hinder their clinical applications. Accordingly, to promote the efficiency of conventional PSs, various polymer-driven modification and functionalization strategies have been adopted to engineer multifunctional hybrid phototherapeutics. This review assesses recent advancements and state-of-the-art research in polymer-PSs hybrid materials developed for APDT applications. Further, the key research findings of the following aspects are considered in-depth with constructive discussions: i) PSs-integrated/functionalized polymeric composites through various molecular interactions; ii) PSs-deposited coatings on different substrates and devices to eliminate healthcare-associated infections; and iii) PSs-embedded films, scaffolds, and hydrogels for regenerative medicine applications.

•

Synthetic strategies of engineered polymer-based hybrid materials integrated with photosensitizers for APDT.

•

Utilization of photosensitizer-incorporated polymeric materials in health care applications.

•

Challenges and opportunities in the future development of polymeric biomaterials with improved photo-bactericidal properties.

Hydrogel Combined with Phototherapy in Wound Healing

Wound healing is a complex biological process that involves tissue regeneration. Traditional wound dressings are dry, cannot provide a moist environment for wound healing, and do not have high antibacterial properties. Hydrogels, which are capable of retaining large amounts of water, can create a moist healing environment. Currently, phototherapies have exhibited a high potential for the treatment of bacterial infections. Therefore, combining hydrogels with phototherapy can adequately overcome the shortcomings of traditional wound treatment methods and show great potential for wound healing owing to their high efficiency, low irritation, and good antibacterial performance. In this review, the application of hydrogels combined with phototherapy in wound healing is summarized. First, the basic principles of photodynamic therapy and photothermal therapy are briefly introduced. In addition, the progress of the application of hydrogel combined with phototherapy in wound healing is systematically investigated. Finally, the challenges and prospects of combining hydrogel with phototherapy in wound healing are discussed.

Antibacterial Photodynamic Therapy in the Near-Infrared Region with a Targeting Antimicrobial Peptide Connected to a π-Extended Porphyrin

The increase of antimicrobial resistance to conventional antibiotics is worldwide a major health problem that requires the development of new bactericidal strategies. Antimicrobial photodynamic therapy (a-PDT) that generates reactive oxygen species acting on multiple cellular targets is unlikely to induce bacterial resistance. This localized treatment requires, for safe and efficient treatment of nonsuperficial infections, a targeting photosensitizer excited in the near IR. To this end, a new conjugate consisting of an antimicrobial peptide linked to a π-extended porphyrin photosensitizer was designed for a-PDT. Upon irradiation at 720 nm, the conjugate has shown at micromolar concentration strong bactericidal action on both Gram-positive and Gram-negative bacteria. Moreover, this conjugate allows one to reach a low minimum bactericidal concentration with near IR excitation without inducing toxicity to skin cells.

Colistimethate sodium-chitosan hydrogel for treating Gram-negative bacterial wound infections

The drug resistance is higher among Gram-negative bacteria and demands the usage of strong antibiotics which can in turn result in systemic toxicity. In the treatment of the chronic wounds harboring pathogenic Gram-negative bacteria, the demand for an antimicrobial product that can be topically administered has been on the rise. In an effort to address the above issue, we have developed Colistimethate sodium (a high-end antibiotic) loaded chitosan hydrogel and characterized. The prepared hydrogel is very stable and observed to be bio- and hemo-compatible in nature. The antibacterial activity of the prepared hydrogel was studied against both ATCC (American Type Culture Collection) strains and clinical isolates of Escherichia coli, Pseudomonas aeruginosa and Klebsiella pneumoniae. The CMS incorporated hydrogel is also capable of inhibiting the biofilm formation. The developed hydrogel can be potentially being used for the treatment of Gram-negative bacterial infected wounds.

Latest trends on photodynamic disinfection of Gram-negative bacteria: photosensitizer's structure and delivery systems

Antimicrobial resistance is threatening to overshadow last century's medical advances. Etiological agents of previously eradicated infectious diseases are now resurgent as multidrug-resistant strains, especially for Gram-negative strains. Finding new therapeutic solutions is a real challenge for our society. In this framework, Photodynamic Antimicrobial ChemoTherapy relies on the generation of toxic reactive oxygen species in the presence of light, oxygen, and a photosensitizer molecule. The use of reactive oxygen species is common for disinfection processes, using chemical agents, such as chlorine and hydrogen peroxide, and as they do not have a specific molecular target, it decreases the potential of tolerance to the antimicrobial treatment. However, light-driven generated reactive species result in an interesting alternative, as reactive species generation can be easily tuned with light irradiation and several PSs are known for their low environmental impact. Over the past few years, this topic has been thoroughly studied, exploring strategies based on single-molecule PSs (tetrapyrrolic compounds, dipyrrinate derivatives, metal complexes, etc.) or on conjunction with delivery systems. The present work describes some of the most relevant advances of the last 6 years, focusing on photosensitizers design, formulation, and potentiation, aiming for the disinfection of Gram-negative bacteria.

Facile, Mild-Temperature Synthesis of Metal-Free Phthalocyanines

It is important for the synthesis and research of phthalocyanine compounds for these compounds to be easily obtained at low temperature. We observed that metal-free phthalocyanine was sometimes found in a simple system used to synthesize phthalocyanine precursors at room temperature, and further studies showed that the key to the effective formation of phthalocyanines at low temperature lay in the presence of equal volumes of alcohol and amine, in addition to substrate phthalonitriles and solvents, in the reaction system. A synthetic mechanism was proposed and facile syntheses have been realized, such as the synthesis of tetra-α(β)-nitrophthalocyanines and tetra-α(β)-(4-tert-butylphenoxy)phthalocyanines from the corresponding substituted phthalonitriles at mild temperature (37 °C). The results are significant for the design and synthesis of new phthalocyanine derivatives, and the method is convenient and easy to adopt for general use in standard laboratories.

Emerging hybrid biomaterials for oxidative stress induced photodynamic therapy

Cancer therapy has undergone tremendous advancements in the past few years. The drawbacks of most of these therapies have encouraged researchers to obtain further insight into the complex chemical, biochemical and biological processes ongoing in the evolving cancer cells. These studies have led to an advent of reactive oxygen species mediated therapies to target and disrupt the cancer pathology. Photodynamic therapy (PDT) has emerged as a potent candidate for oxidative stress mediated non-invasive technique for rapid diagnosis and treatment of cancer. Towards this, biomacromolecules derived hybrid nanomaterials have contributed largely in the development of various therapeutics and theranostics for efficacious cancer management that can assist PDT. This review summarizes various hybrid biomaterials and advanced techniques that have been explored widely in the past few years for PDT application. The article also mentions some of the important in-vitro and in-vivo developments and observations explored by employing these materials for PDT application. The article also describes the interactions of these materials at the biological interface and the probable mechanism that assist in generation of oxidative stress and subsequent cell death.

Light and Hydrogels: A New Generation of Antimicrobial Materials

Nosocomial diseases are becoming a scourge in hospitals worldwide, and new multidrug-resistant microorganisms are appearing at the forefront, significantly increasing the number of deaths. Innovative solutions must emerge to prevent the imminent health crisis risk, and antibacterial hydrogels are one of them. In addition to this, for the past ten years, photochemistry has become an appealing green process attracting continuous attention from scientists in the scope of sustainable development, as it exhibits many advantages over other methods used in polymer chemistry. Therefore, the combination of antimicrobial hydrogels and light has become a matter of course to design innovative antimicrobial materials. In the present review, we focus on the use of photochemistry to highlight two categories of hydrogels: (a) antibacterial hydrogels synthesized via a free-radical photochemical crosslinking process and (b) chemical hydrogels with light-triggered antibacterial properties. Numerous examples of these new types of hydrogels are described, and some notions of photochemistry are introduced.

Turning Photons into Drugs: Phthalocyanine-Based Photosensitizers as Efficient Photoantimicrobials

One of the most promising alternatives for treating bacterial infections is antimicrobial photodynamic therapy (aPDT), making the synthesis and application of new photoactive compounds called photosensitizers (PS) a dynamic research field. In this regard, phthalocyanine (Pc) derivatives offer great opportunities due to their extraordinary light-harvesting and tunable electronic properties, structural versatility, and stability. This Review, rather than focusing on synthetic strategies, intends to overview current progress in the structural design strategies for Pcs that could achieve effective photoinactivation of microorganisms. In addition, the Review provides a concise look into the recent developments and applications of nanocarrier-based Pc delivery systems.

Design, synthesis and biological evaluation of water soluble and non-aggregated silicon phthalocyanines, naphthalocyanines against A549, SNU-398, SK-MEL128, DU-145, BT-20 and HFC cell lines as potential anticancer agents

Cancer has become an important public problem in worldwide since cancer incidence and mortality are growing rapidly. In this study, water soluble and non-aggregated silicon (IV) phthalocyanines and naphthalocyanines containing (3,5-bis{3-[3-(diethylamino)phenoxy]propoxy}phenyl)methoxy groups have been synthesized and characterized to investigate their anticancer potential. Their DNA binding/nuclease, topoisomerases inhibition were investigated using UV-Vis absorption, thermal denaturation and agarose gel electrophoresis. The in vitro cytotoxic properties of the compounds on human lung (A549), breast (BT-20), liver (SNU-398), prostate (DU-145), melanoma (SK-Mel 128) carcinoma and human fibroblast (HFC) normal cell lines were evaluated by using MTT assay. In order to determine the mechanism of cancer cell growth suppression, cell cycle analysis was carried out using flow cytometer on A549 cell line. The K_b values of SiPc1a and SiNc2a were 6.85 ± (0.35) × 10⁶ and 1.72 ± (0.16) × 10⁴ M^-1 and T_m values of ct-DNA were calculated as 82.02 °C and 78.07 °C, respectively in the presence of both compounds. The Δ_Tm values of SiPc1a and SiNc2a were calculated as 6.45 and 2.50 °C, respectively. The nuclease effects of SiPc1a and SiNc2a with supercoiled plasmid pBR322 DNA demonstrated that both compounds did not trigger any DNA nuclease effects at the lowest concentrations without irradiation whereas both compounds in the presence of activating agent (H₂O₂) showed significant plasmid DNA nuclease actions under irradiation (22.5 J/cm²). SiPc1a and SiNc2a inhibited to topoisomerase I on increasing concentrations whilst they had lower inhibition action toward topoisomerase II that of topoisomerase I. The in vitro cytotoxicity studies displayed that SiPc1a had the highest cytotoxic effects among the tested compounds against A549, SNU-398, SK-MEL128, DU-145, BT-20 and HFC cell lines with CC₅₀ values ranged from 0.49 to 2.99 µM. Furthermore, SiPc1a inhibited cell proliferation by cell cycle arrest in G₀/G₁ phase. All of these results suggested that SiPc1a is a promising candidate as an anticancer agent.

Enhanced Antimicrobial and Antibiofilm Effect of New Colistin-Loaded Human Albumin Nanoparticles

Multidrug-resistant (MDR) Gram-negative bacteria (GNB), such as Acinetobacter and Klebsiella, are responsible for severe hospital-acquired infections. Colistin, despite its toxicity and low tissue penetration, is considered the last resort antibiotic against these microorganisms. Of concern, the use of Colistin has recently been compromised by the emergence of Colistin resistance. Herein, we developed a new formulation consisting of multifunctional chitosan-coated human albumin nanoparticles for the delivery of Colistin (Col/haNPs). Col/haNPs were in vitro characterized for encapsulation efficiency, drug release, stability and cytotoxicity and were evaluated for antibacterial activity against MDR GNB (Acinetobacter baumannii and Klebsiella pneumoniae). Col/haNPs showed sizes lower than 200 nm, high encapsulation efficiency (98.65%) and prolonged in vitro release of Colistin. The safety of the nanoformulation was demonstrated by a negligible cytotoxicity on human fibroblasts and hemolytic activity. Col/haNPs evidenced a high antibacterial effect with a significant decrease in MIC values compared to free Colistin, in particular against Col-resistant strains with a pronounced decline of bacterial growth over time. Moreover, Col/haNPs exhibited an inhibitory effect on biofilm formation that was 4 and 60 fold higher compared to free Colistin, respectively for Colistin susceptible and resistant A. baumannii. Our findings suggest that Col/haNPs could represent a promising Colistin nanocarrier with high antimicrobial activity on MDR GNB.

Heparin modified photosensitizer-loaded liposomes for tumor treatment and alleviating metastasis in phototherapy

Phototherapy holds promise in cancer treatment for its prominent antitumor efficacy and low systematic toxicity compared with traditional chemotherapy. However, the higher risk of tumor metastasis caused by the severe hypoxic state during phototherapy is a threat in practical use. Here, in order to tackle this challenge, we developed a delivery system via loading the photosensitizer indocyanine green (ICG) into the low molecular weight heparin (LMWH) modified liposomes (LMWH-ICG-Lip) to realize the synergistic effects between photosensitizer and drug vehicle, achieving better phototherapeutic efficacy and meanwhile alleviating the potential risk of tumor metastasis caused by phototherapy. In this system, besides elongating the photosensitizers' circulation time and enhancing their accumulating efficacy to tumor tissues, LMWH itself also exhibited anti-metastasis efficacy via inhibiting adhesion of platelets to tumor cells and decreasing migration and invasion capability of tumor cells. In vivo efficacy evaluation was conducted on orthotopic 4T1 breast cancer model, and the system of LMWH-ICG-Lip could alleviate metastasis potential of residual tumor cells after irradiation, and elicit optimistic antitumor and anti-metastasis efficacy for phototherapy.

Antibacterial Photoactivity and Thermal Stability of Tetra-cationic Porphyrins Immobilized on Cellulosic Fabrics

The thermal stability and photo-bactericidal effect of several tetra-cationic porphyrins and their zinc ion compounds immobilized onto cellulosic fabrics against S. aureus, P. aeruginosa, and E. coli were investigated and compared using a 100 W tungsten lamp. Immobilization of various concentrations of these photosensitizers onto cellulosic fabrics was carried out and characterized by ATR-FT-IR, DRS, TGA, and SEM. Applied cellulosic fabrics with the photosensitizers exhibited remarkable photo-stability, thermal stability, and antimicrobial activity against these studied strains.

Design of Photosensitizing Agents for Targeted Antimicrobial Photodynamic Therapy

Photodynamic inactivation of microorganisms has gained substantial attention due to its unique mode of action, in which pathogens are unable to generate resistance, and due to the fact that it can be applied in a minimally invasive manner. In photodynamic therapy (PDT), a non-toxic photosensitizer (PS) is activated by a specific wavelength of light and generates highly cytotoxic reactive oxygen species (ROS) such as superoxide (O2-, type-I mechanism) or singlet oxygen (1O2*, type-II mechanism). Although it offers many advantages over conventional treatment methods, ROS-mediated microbial killing is often faced with the issues of accessibility, poor selectivity and off-target damage. Thus, several strategies have been employed to develop target-specific antimicrobial PDT (aPDT). This includes conjugation of known PS building-blocks to either non-specific cationic moieties or target-specific antibiotics and antimicrobial peptides, or combining them with targeting nanomaterials. In this review, we summarise these general strategies and related challenges, and highlight recent developments in targeted aPDT.

Design of nanostructure chitosan hydrogels for carrying zinc phthalocyanine as a photosensitizer and difloxacin as an antibacterial agent

Here, we develop homogeneous hydrogel networks containing zinc tetraamino-phthalocyanine (ZnTAPc) as photosensitizer cross-linked with glutaraldehyde. The cross-linking process occurs via imine bond formation by reaction of NH₂ groups of ZnTAPc and chitosan with aldehyde groups of the glutaraldehyde. Insertion of ZnTAPc interestingly increases its solubility in water medium. 2.0% and 4% w/w of the ZnTAPc were used with respect to chitosan polymer to generate hydrogel photosensitizer. FT-IR and UV-Vis spectroscopy, scanning electron microscopy, and rheological measurements were applied to evaluate the properties of the prepared hydrogels. Finally, difloxacin HCl was selected as a fluoroquinolone drug for the assessment of the drug release features of the made hydrogels. The difloxacin release was affected by the amount of ZnTAPc and pH medium. The activity of the hydrogels in photosensitizing process was considered by computing the rate of 1,3-diphenylisobenzofuran adsorption reduction as a singlet oxygen chemical quencher.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

Polymyxin Delivery Systems: Recent Advances and Challenges

Polymyxins are vital antibiotics for the treatment of multiresistant Gram-negative ESKAPE pathogen infections. However, their clinical value is limited by their high nephrotoxicity and neurotoxicity, as well as their poor permeability and absorption in the gastrointestinal tract. This review focuses on various polymyxin delivery systems that improve polymyxin bioavailability and reduce drug toxicity through targeted and controlled release. Currently, the most suitable systems for improving oral, inhalation, and parenteral polymyxin delivery are polymer particles, liposomes, and conjugates, while gels, polymer fibers, and membranes are attractive materials for topical administration of polymyxin for the treatment of infected wounds and burns. In general, the application of these systems protects polymyxin molecules from the negative effects of both physiological and pathological factors while achieving higher concentrations at the target site and reducing dosage and toxicity. Improving the properties of polymyxin will be of great interest to researchers who are focused on developing antimicrobial drugs that show increased efficacy and safety.

Conjugate of chitosan nanoparticles with chloroaluminium phthalocyanine: Synthesis, characterization and photoinactivation of Streptococcus mutans biofilm

BACKGROUND

Antimicrobial photodynamic therapy (aPDT) using chloroaluminium phthalocyanine (ClAlPc) has high oxidative power allowing for the control of biofilms, especially when the photosensitizer is administered in an appropriate release vehicle. This study aimed to develop/characterize the ClAlPc encapsulated in chitosan nanoparticles (CSNPs), and evaluate its antimicrobial properties against S. mutans biofilms.

METHODS

CSNPs were prepared by ion gelation, and characterization studies included particle size, polydispersion index (IPd), zeta potential, accelerated stability, absorption spectrum and ClAlPc quantification. The S. mutans biofilms were formed in bovine dentin blocks at 37 °C for 48 h under microaerophilic conditions. 8 μM ClAlPc was combined with a diode laser (InGaAlP) at 660 nm and 100 J/cm². The aPDT toxicity was verified by dark phototoxicity. The antimicrobial activity was verified by CFU/mL and biofilm was analyzed by scanning electron microscopy (SEM). The number of viable bacteria was analyzed by ANOVA and Tukey HSD tests (α = 0.05).

RESULTS

The characterization revealed that the ClAlPc nanoparticles were found in nanometer-scale with adequate photophysical and photochemical properties. The aPDT mediated by ClAlPc + CSNPs nanoconjugate showed a significant reduction in the viability of S. mutans (1log10 CFU/mL) compared to the negative control (PBS, p < 0.05). The aPDT mediated by ClAlPc was similar to PBS (p > 0.05). SEM revealed change in biofilm morphology following the treatment of bacteria with aPDT ClAlPc + CSNPs. Cells were arranged as single or in shorted chains. Irregular shapes of S. mutans were found.

CONCLUSION

ClAlPc nanoparticles are considered stable and aPDT mediated by ClAlPc + CSNPs nanoconjugate was effective against S. mutans biofilm.

Light-Activated Zirconium(IV) Phthalocyanine Derivatives Linked to Graphite Oxide Flakes and Discussion on Their Antibacterial Activity

In search of an effective antibacterial agent that is useful in photodynamic therapy, new derivatives of zirconium(IV) phthalocyanine (ZrPc) complexes were obtained and linked to graphite oxide flakes. In the syntheses of ZrPc derivatives, two bis-axially substituted ligands with terminal amino group and different lengths of linear carbon chain (C4 in 4-aminobutyric acid or C11 in 11-aminoundecanoic acid) were used. The optical properties (absorption and photoluminescence spectra) of ZrPcs and the composites were examined. Broadband red–near-infrared lamp was tested as an external stimulus to activate ZrPcs and the composites. Optical techniques were used to show generation of singlet oxygen during irradiation. Considering the application of graphite oxide-based materials as bacteriostatic photosensitive additives for endodontic treatment of periapical tissue inflammation, the antibacterial activity was determined on one Escherichia coli strain isolated directly from an infected root canal of a human tooth and one strain with silver and antibiotic resistance. Looking at the obtained results, modified levels of activity toward different bacterial strains are discussed.