Synergistic effects of branching enzyme and transglucosidase on the modification of potato starch granules

Retrogradation inhibition and intragranular distribution in cooked rice by addition of α-glucosidase (AG) and branching enzyme (BE)

The effect of inhibiting retrogradation and changes in chain length distribution by AG and BE, which are texture-modifying enzymes, has been clarified. To ascertain in which part of the rice grain retrogradation occurs and which enzymes is most effective, the degree of retrogradation in each part of the rice grain was measured from the surface to the core of the same rice grain using a synchrotron radiation X-ray beam with a beam size of 100 μm. Retrogradation was effectively suppressed at all measurement sites by enzyme addition, although the effect of enzymes was greater at the surface. Rice grain sections were stained with iodine and eosin. A starch layer that does not easily form a complex with iodine was observed inside the protein layer at the surface of cooked rice. A starch layer with a long molecular chain that forms complexes with iodine was observed inside the rice grain.

Comparative study on dynamic in vitro digestion characteristics of lotus seed starch-EGCG complex prepared by different processing methods

To study the effect of starch-polyphenol interaction induced by different processing methods on digestion characteristics, a dynamic in vitro human gastrointestinal system was employed to investigate the digestive characteristics of lotus seed starch-epigallocatechin gallate (EGCG) complex (LS-EGCG) prepared by different processing methods. Digestion altered crystal structure, particle size, morphology, pH, starch hydrolysis, and EGCG content. Processing broke physical barriers, reducing particle size by enzyme erosion. Enzymatic hydrolysis gradually exposed EGCG, indicated by green fluorescence. Heat and high pressure treatments enhanced starch dissolution, increasing sugar accumulation and hydrolysis. However, ultrasonic-microwave and high pressure microfluidization treatments formed dense structures, decreasing hydrolysis rates. Overall, the complex formed by high pressure microfluidization showed better enzyme resistance. The results provide a scientific basis for the development of food with quality and functional properties.

Enzymatic modification lowers syneresis in corn starch gels during freeze-thaw cycles through 1,4-α-glucan branching enzyme

The current research in the food industry regarding enzymatic modification to enhance the freeze-thaw (FT) stability of starch is limited. The present study aimed to investigate the FT stability of normal corn starch (NCS) modified using 1,4-α-glucan branching enzyme (GBE) derived from Geobacillus thermoglucosidans STB02. Comprehensive analyses, including syneresis, scanning electron microscopy, and low-field nuclear magnetic resonance, collectively demonstrated the enhanced FT stability of GBE-modified corn starch (GT-NCS-30) in comparison to its native form. Its syneresis was 66.4 % lower than that of NCS after three FT cycles. Notably, GBE treatment induced changes in the pasting properties and thermal resistance of corn starch, while simultaneously enhancing the mechanical strength of the starch gel. Moreover, X-ray diffractograms and microstructural assessments of freeze-thawed gels indicated that GBE treatment effectively hindered the association of corn starch molecules, particularly amylose retrogradation. The enhanced FT stability of GBE-modified starch can be attributed to alterations in the starch structure induced by GBE. This investigation establishes a foundation for further exploration into the influence of GBE treatment on the FT stability of starch and provides a theoretical basis for further research in this area.

Optimization of 4,6-α and 4,3-α-Glucanotransferase Production in Lactococcus lactis and Determination of Their Effects on Some Quality Characteristics of Bakery Products

In this study, the production of 4,6-α (4,6-α-GTase) and 4,3-α-glucanotransferase (4,3-α-GTase), expressed previously in Lactococcus lactis, was optimized and these enzymes were used to investigate glycemic index reduction and staling delay in bakery products. HP-SEC analysis showed that the relevant enzymes were able to produce oligosaccharides from potato starch or malto-oligosaccharides. Response Surface Methodology (RSM) was used to optimize enzyme synthesis and the highest enzyme activities of 15.63 ± 1.65 and 19.01 ± 1.75 U/mL were obtained at 1% glucose, pH 6, and 30 °C for 4,6-α-GTase and 4,3-α-GTase enzymes, respectively. SEM analysis showed that both enzymes reduced the size of the starch granules. These enzymes were purified by ultrafiltration and used to produce bread and bun at an enzyme activity of 4 U/g, resulting in a decrease in the specific volume of the bread. It was found that the estimated glycemic index (eGI) of bread formulated with 4,6-α-GTase decreased by 18.01%, and the eGI of bread prepared with 4,3-α-GTase decreased by 13.61%, indicating a potential delay in staling. No significant differences were observed in the sensory properties of the bakery products. This is the first study showing that 4,6-α-GTase and 4,3-α-GTase enzymes have potential in increasing health benefits and improving technological aspects regarding bakery products.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Starch Modification with Molecular Transformation, Physicochemical Characteristics, and Industrial Usability: A State-of-the-Art Review

Starch is a readily available and abundant source of biological raw materials and is widely used in the food, medical, and textile industries. However, native starch with insufficient functionality limits its utilization in the above applications; therefore, it is modified through various physical, chemical, enzymatic, genetic and multiple modifications. This review summarized the relationship between structural changes and functional properties of starch subjected to different modified methods, including hydrothermal treatment, microwave, pre-gelatinization, ball milling, ultrasonication, radiation, high hydrostatic pressure, supercritical CO₂, oxidation, etherification, esterification, acid hydrolysis, enzymatic modification, genetic modification, and their combined modifications. A better understanding of these features has the potential to lead to starch-based products with targeted structures and optimized properties for specific applications.

Debranching facilitates malate esterification of waxy maize starch and decreases the digestibility

In this study, the debranching followed by malate esterification was employed to prepare malate debranched waxy maize starch (MA-DBS) with a high degree of substitution (DS) and low digestibility using malate waxy maize starch (MA-WMS) as the control. The optimal esterification conditions were obtained using an orthogonal experiment. Under this condition, the DS of MA-DBS (0.866) was much higher than that of MA-WMS (0.523). A new absorption peak was generated at 1757 cm^-1 in the infrared spectra, indicating the occurrence of malate esterification. Compared with MA-WMS, MA-DBS had more particle aggregation, resulting in an increase in the average particle size from scanning electron microscopy and particle size analysis. The X-ray diffraction results showed that the relative crystallinity decreased after malate esterification, in which the crystalline structure of MA-DBS almost disappeared, which was consistent with the decrease of decomposition temperature by thermogravimetric analysis and the disappearance of the endothermic peak by differential scanning calorimeter. In vitro digestibility tests showed an order: WMS > DBS > MA-WMS > MA-DBS. The MA-DBS showed the highest content of resistant starch (RS) of 95.77 % and the lowest estimated glycemic index of 42.27. In a word, pullulanase debranching could produce more short amylose, promoting malate esterification and improving the DS. The presence of more malate groups inhibited the formation of starch crystals, increased particle aggregation, and enhanced resistance to enzymolysis. The present study provides a novel protocol for producing modified starch with higher RS content, which has potential application in functional foods with a low glycemic index.

Structural characterization of potato starch modified by a 4,6-α-glucanotransferase B from Lactobacillus reuteri E81

The recent reports have revealed that increase in amount of α-1,6 linkages by modification of potato starch with enzyme (glycosyltransferases) treatment gains slowly digestible properties to the starch; however, the formation of new α-1,6-glycosidic linkages diminish the thermal resistance of the starch granules. In this study, a putative GtfB-E81, (a 4,6-α-glucanotransferase-4,6-αGT) from L. reuteri E81 was firstly used to produce a short length of α-1,6 linkages. NMR results revealed that external short chains mostly comprised of 1-6 glucosyl units were newly produced in potato starch, and the α-1,6 linkage ratio was significantly increased from 2.9 % to 36.8 %, suggesting that this novel GtfB-E81 might have potentially an efficient transferase activity. In our study, native and GtfB-E81 modified starches showed fundamental similarities with respect to their molecular properties and treatment of native potato starch with GtfB-E81 did not remarkably change thermal stability of the potato starch, which seems to be very prominent for the food industry given the significantly decreased thermal stability results obtained for the enzyme modified starches reported in the literature. Therefore, the results of this study should open up emerging perspectives for regulating slowly digestible characteristics of potato starch in future studies without a significant change in the molecular, thermal, and crystallographic properties.

Importance of Inactivation Methodology in Enzymatic Processing of Raw Potato Starch: NaOCl as Efficient α-Amylase Inactivation Agent

Efficient inactivation of microbial α-amylases (EC 3.2.1.1) can be a challenge in starch systems as the presence of starch has been shown to enhance the stability of the enzymes. In this study, commonly used inactivation methods, including multistep washing and pH adjustment, were assessed for their efficiency in inactivating different α-amylases in presence of raw potato starch. Furthermore, an effective approach for irreversible α-amylase inactivation using sodium hypochlorite (NaOCl) is demonstrated. Regarding inactivation by extreme pH, the activity of five different α-amylases was either eliminated or significantly reduced at pH 1.5 and 12. However, treatment at extreme pH for 5 min, followed by incubation at pH 6.5, resulted in hydrolysis yields of 42–816% relative to controls that had not been subjected to extreme pH. “Inactivation” by multistep washing with water, ethanol, and acetone followed by gelatinization as preparation for analysis gave significant starch hydrolysis compared to samples inactivated with NaOCl before the wash. This indicates that the further starch degradation observed in samples subjected to washing only took place during the subsequent gelatinization. The current study demonstrates the importance of inactivation methodology in α-amylase-mediated raw starch depolymerization and provides a method for efficient α-amylase inactivation in starch systems.

Effect of modification by maltogenic amylase and branching enzyme on the structural and physicochemical properties of sweet potato starch

Sweet potato starch (SPSt) was treated sequentially with the combination of maltogenic amylase (MA) and branching enzyme (BE) (MA → BE) or BE and MA (BE→MA) to modify its structural and physicochemical properties. Following the MA → BE and BE→MA modifications, the degree of branching was increased from 12.02 % to 44.06 %; whereas, the average chain length decreased from 18.02 to 12.32. Fourier-transform infrared spectroscopy and digestive performance analysis indicated that the modifications reduced hydrogen bonds and increased resistant starch in SPSt. Rheological analysis revealed that the storage and loss moduli of the modified samples were lower than those of the control samples, except for starch treated with MA alone. X-ray diffraction measurements suggested that the re-crystallisation peak intensities of the enzyme-modified starches were lower than those of the untreated sample. The retrogradation resistance ability of the analysed samples followed the order: BE→MA-starches > MA → BE-starches > untreated starch. The relationship between the crystallisation rate constant and short branched chains (DP_6-9) was well described by linear regression. This study provides a theoretical foundation for retarding the retrogradation of starch, which can improve food quality and extend the shelf-life of enzymatically modified starchy foods.

Biochemical characteristics and potential application of a thermostable starch branching enzyme from Bacillus licheniformis

Slowly digestible starch (SDS) has attracted increasing attention for its function of preventing metabolic diseases. Based on transglycosylation, starch branching enzymes (1,4-α-glucan branching enzymes, GBEs, EC 2.4.1.18) can be used to regulate the digestibility of starch. In this study, a GBE gene from Bacillus licheniformis (bl-GBE) was cloned, expressed, purified, and characterized. Sequence analysis and structural modeling showed that bl-GBE belong to the glycoside hydrolase 13 (GH13) family, with which its active site residues were conserved. The bl-GBE was highly active at 80 °C and a pH range of 7.5-9.0, and retained 90% of enzyme activity at 70 °C for 16 h. bl-GBE also showed high substrate specificity (80.88 U/mg) on potato starch. The stability and the changes of the secondary structure of bl-GBE at different temperature were determined by circular dichroism (CD) spectroscopy. The CD data showed a loss of 20% of the enzyme activity at high temperatures (80 °C), due to the decreased content of the α -helix in the secondary structure. Furthermore, potato starch treated with bl-GBE (300 U/g starch) showed remarkable increase in stability, solubility, and significant reduction viscosity. Meanwhile, the slowly digestible starch content of bl-GBE modified potato starch increased by 53.03% compared with native potato starch. Our results demonstrated the potential applications of thermophilic bl-GBE in food industries.

Exogenous 6-benzylaminopurine enhances waterlogging and shading tolerance after anthesis by improving grain starch accumulation and grain filling

Due to the frequent occurrence of extreme weather events, the area of wheat affected by continuous cloudy rainfall is increasing, with waterlogging becoming a major limiting factor of wheat yield. To alleviate the effect, spraying exogenous plant growth regulators is often used. In this study, two wheat cultivars, waterlogging-tolerant Yangmai 18 and waterlogging-sensitive Sumai 188, were selected for waterlogging and shading (WS) after anthesis for 7, 11, and 15 days respectively. Three concentrations of 6-benzylaminoadenine (6-BA) solution (15, 25, and 35 mg·L^-1) were sprayed after WS treatment and water was sprayed as the control. Then, the effect of spraying 6-BA on photosynthetic characteristics, starch content, grain filling characteristics, and yield was explored under artificially stimulated continuous cloudy rainfall during anthesis. Compared with the control, the application of 6-BA caused a significant increase in grain plumpness throughout grain filling, as well as increases in the net photosynthetic rate (P _n), stomatal conductance (G _s), and transpiration rate (T _r), and a significant decrease in the intercellular CO₂ concentration (C _i) of the flag leaves, all of which enhanced the photosynthetic capacity. The content of total starch, amylose, and amylopectin in the grains also increased significantly compared with the control. After WS for 15 days, the starch content increased by 3.81%-11.41% compared with the control. Spraying 6-BA also prolonged grain filling, increased the average grain filling rate, and significantly increased the 1000-grain weight and yield. The thousand-grain weight increased by 5.06%-43.28%, and wheat yield increased by 8.93%-64.27% after spraying 25 mg·L^-1 of the 6-BA solution. These findings suggest that the application of 6-BA after WS stress could significantly improve the photosynthetic performance, which is propitious to the accumulation and transport of photosynthetic products after anthesis. Besides, spraying 6-BA can also increase the duration and rate of grain filling and starch accumulation content and improve grain weight, thereby alleviating the adverse effects of WS on wheat yield. Overall, spraying 25 mg·L^-1 of the 6-BA solution had an optimal effect. These findings provide a theoretical basis for the exploration of cultivation techniques and measures aimed at alleviating damage caused by continuous rainfall during wheat anthesis.

Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review

Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.

Glycogen Branching Enzyme with a Novel Chain Transfer Mode Derived from Corallococcus sp. Strain EGB and Its Potential Applications

Dietary starch with an increased content of resistant starch (RS) has the potential to reduce the prevalence of diabetes, obesity, and cardiovascular diseases. Here, an efficient glycogen branching enzyme, CcGBE, from Corallococcus sp. strain EGB was identified, and its relevant properties, including potential application in the preparation of modified starch, were evaluated. The purified CcGBE exhibited a maximal specific activity of approximately 20,000 U/mg using cassava starch as the optimal substrate. The content of α-1,6-glucosidic bonds in CcGBE-modified cassava starch increased from 2.9 to 13.2%. Meanwhile, both the average chain length (CL) of CcGBE-modified starch and the blue value of the color complex formed by starch and iodine initially increased and then decreased, indicating that a new CL transfer mode was reported. Perforated small starch granules were released after CcGBE treatment, and a time-dependent decrease in the retrogradation enthalpy (ΔH_r) of cassava starch indicated that CcGBE inhibited the long-term retrogradation of starch. Moreover, the RS content and cold water solubility (CWS) of CcGBE-modified starch increased from 3.3 to 12.8% and from 23.1 to 93.8%, respectively. These findings indicate the application potential of CcGBE for the preparation of modified starch with increased RS and CWS.

Crystalline polysaccharides: A review

The biodegradability and mechanical properties of polysaccharides are dependent on their architecture (linear or branched) as well as their crystallinity (size of crystals and crystallinity percent). The amount of crystalline zones in the polysaccharide significantly governs their ultimate properties and applications (from packaging to biomedicine). Although synthesis, characterization, and properties of polysaccharides have been the subject of several review papers, the effects of crystallization kinetics and crystalline domains on the properties and application have not been comprehensively addressed. This review places focus on different aspects of crystallization of polysaccharides as well as applications of crystalline polysaccharides. Crystallization of cellulose, chitin, chitosan, and starch, as the main members of this family, were discussed. Then, application of the aforementioned crystalline polysaccharides and nano-polysaccharides as well as their physical and chemical interactions were overviewed. This review attempts to provide a complete picture of crystallization-property relationship in polysaccharides.

Potato starch modified by Streptococcus thermophilus GtfB enzyme has low viscoelastic and slowly digestible properties

Potato starch with high viscosity and digestibility cannot be added into some foods. To address this issue, a novel starch-acting enzyme 4,6-α-glucosyltransferase from Streptococcus thermophilus (StGtfB) was used. StGtfB decreased the iodine affinity and the molecular weight, but increased the degree of branching of starch at a mode quite different from glycogen 1,4-α-glucan branching enzyme (GBE). StGtfB at 5 U/g substrate mainly introduced DP 1-7 into amylose (AMY) or DP 1-12 branches into amylopectin (AMP), and increased the ratio of short- to long-branches from 0.32 to 2.22 or from 0.41 to 2.50. The DP 3 branch chain was the most abundant in both StGtfB-modified AMY and StGtfB-modified AMP. The DP < 6 branch chain contents in StGtfB-modified AMY were 42.68%, much higher than those of GBE-modified AMY. StGtfB significantly decreased viscoelasticity but still kept pseudoplasticity of starch. The modifications also slowed down the glucose generation rate of products at the mammalian mucosal α-glucosidase level. The slowly digestible fraction in potato starch increased from 34.29% to 53.22% using StGtfB of 5 U/g starch. This low viscoelastic and slowly digestible potato starch had great potential with respect to low and stable postprandial blood glucose.

Expression and characterization of 1,4-α-glucan branching enzyme from Microvirga sp. MC18 and its application in the preparation of slowly digestible starch

Nutraceuticals containing modified starch with increased content of slowly-digestible starch (SDS) may reduce the prevalence of obesity, diabetes and cardiovascular diseases due to its slow digestion rate. Enzymatic methods for the preparation of modified starch have attracted increasing attention because of their low environmental impact, safety and specificity. In this study, the efficient glucan branching enzyme McGBE from Microvirga sp. MC18 was identified, and its relevant properties as well as its potential for industrial starch modification were evaluated. The purified McGBE exhibited the highest specificity for potato starch, with a maximal specific activity of 791.21 U/mg. A time-dependent increase in the content of α-1,6 linkages from 3.0 to 6.0% was observed in McGBE-modified potato starch. The proportion of shorter chains (degree of polymerization, DP < 13) increased from 29.2 to 63.29% after McGBE treatment, accompanied by a reduction of the medium length chains (DP 13-24) from 52.30 to 35.99% and longer chains (DP > 25) from 18.51 to 0.72%. The reduction of the storage modulus (G') and retrogradation enthalpy (ΔHr) of potato starch with increasing treatment time demonstrated that McGBE could inhibit the short- and long-term retrogradation of starch. Under the optimal conditions, the SDS content of McGBE-modified potato starch increased by 65.8% compared to native potato starch. These results suggest that McGBE has great application potential for the preparation of modified starch with higher SDS content that is resistant to retrogradation.

Comparison of functional properties of porous starches produced with different enzyme combinations

To obtain porous starch granules with higher absorption capacities, three types of enzyme combinations were adopted to modify wheat and maize starches: (1) sequential α-amylase (AA) → glucoamylase (GA); (2) sequential branching enzyme (BE) → GA; and (3) sequential AA→BE→GA. The results indicated that AA→BE→GA treatment had a most optimal influence on porous starches. Compared to AA→GA and BE→GA, the mesopores in wheat starch granules treated with AA→BE→GA decreased by 52.82 and 48.70%, respectively. Conversely, the macropores increased by 216.68 and 138.18%, respectively. While for maize starch, the percentages of mesopores and macropores hardly changed after three enzyme combinations. Comparing the three enzyme treatments showed that pore volume (0.005 and 0.007 cm³/g) and pore size (36.35 and 26.54 nm) were largest in the AA→BE→GA treated wheat and maize starches, respectively. Compared to the AA→GA and BE→GA, the adsorption capacities for oil, dye and heavy metal ions, wheat starch treated with AA→BE→GA increased by 46.61 and 242.33%, and 44.52 and 134.41%, and 28.83 and 271.72%, respectively. Correspondingly, that of maize starch increased by 29.71 and 133.29%, and 42.92 and 79.93%, and 28.16 and 161.43%, respectively. These results may provide a new and valuable enzyme combination for optimising porous starch granules with higher absorption capacities.

Preparation of rutin-loaded microparticles by debranched lentil starch-based wall materials: Structure, morphology and in vitro release behavior

Different treatments of autoclaving, pullulanase debranching and/or ultrasound were applied to prepare debranched lentil starch (DBLS). Their fine structures can affect the retrogradation patterns of DBLSs, which consequently could affect their potential use as delivery carrier of sensitive bioactive compounds. An attempt was made to use these DBLSs as wall materials to encapsulate rutin, aiming to improve the bioaccessibility, meanwhile to enhance the aqueous solubility and stability of rutin molecules. Their encapsulation efficiency, structural characteristics, thermal stability, morphological features, antioxidant activity and in vitro release behavior under simulated upper gastrointestinal tract environment were evaluated. The results suggested that rutin was dispersed in the DBLS polymer matrix, showing the amorphous nature that further authenticates the encapsulation and entrapment of rutin. The structural analyses of microparticles revealed that rutin could interacted with DBLS biopolymer chains by hydrogen bonds, making the starch molecular chains less susceptible to interact with themselves for reordering. The encapsulation efficiency was found to be in an opposite trend with those values obtained for relative crystallinity, melting enthalpy, degree of order/double helices of DBLS wall materials before encapsulation. The release rate results indicated that DBLS carrier with lower M_w, DP_n and higher molecular order was beneficial for the slower release of rutin encapsulated in the microparticles.

Pre-treatment of granular rice starch to enhance branching enzyme catalysis

Effects of different pre-treatments of granular rice starch using ethanol (ET) and maltogenic α-amylase (MA), separately or combined sequentially ET→MA, were performed to enable efficient subsequent modification with branching enzyme (BE). The pre-treated samples were characterized with respect to morphology, molecular structure, physicochemical properties and the rate of digestion to amylolytic enzymes. MA produced pores and also eroded the granular surface whereas ET caused coapted granules, noticeable swelling but no pores. Crystallinity and enthalpy of gelatinization dramatically decreased with ET and ET→MA. Subsequent BE catalysis increased the specific surface area, crystallinity, α-1,6-glucosidic linkage ratio and enthalpy. BE catalyzed branching resulted in more intact granules, less swelling capacity, solubility and granular separation as compared to their control. These effects were related to reduced amylolytic susceptibility. Pre-treatment prior to BE catalysis offers an efficient alternative way to modify granular starch with different structure and properties depending on the pre-treatment protocol.

Dual modification of various starches: Synthesis, properties and applications

The problems associated with native starches (NSs) and single modified starches were stated in order to justify dual modification of various starches. Broadly, there are two types of dual modification, i.e., homogeneous dual modification and heterogeneous dual modification. The combination of two physical modifications, e.g., (extrusion/annealing); two chemical modifications, e.g., (succinylation/cross-linking) and two enzymes modification (α-amylase/pullulanase) falls under the former classification and the latter classification is the combination of two of each of the differently stated modifications, e.g., acetylation/annealing, extrusion/succinylation, and microwave-assisted phosphorylation, etc. The classification, synthesis, properties and applications of dually modified starches were discussed. There is an attempt to elucidate the problems of each of the single modification in order to justify dual modifications. In dual modifications, the order of reactions, the reaction conditions, the medium of reaction, and the botanical sources of the various starches are very important parameters.

The functionality of laccase- or peroxidase-treated potato flour: Role of interactions between protein and protein/starch

Potato flour is used in bakery products, extruded products and snacks. However, it displays weaker gel strengths and thus the wholesome utility is curtailed significantly. To improve viscoelastic properties and stability of potato gels, herein potato flour was treated with laccase and peroxidase to create a protein network structure leading to stable gels. The results revealed that the secondary structure of potato proteins altered upon the enzyme treatment. The gels of peroxidase-treated potato flour (PPF) and laccase-treated potato flour (LPF) displayed larger anti-shear ability, thermal stability and stronger three-dimensional network structure compared to the native potato gel. The PPF and LPF gels exhibited stronger viscoelastic properties and structural stability compared to peroxidase-treated potato protein and laccase-treated potato protein gels. The outcome serves as a theoretical basis to improve the properties of potato gels and to promote the designing and the development of novel potato flour based functional food.

How starch-g-poly(acrylamide) molecular structure effect sizing properties

The effect of starch-g-poly(acrylamide) (S-g-PAM) molecular structure on sizing properties has been investigated. S-g-PAMs were synthesized with the catalysis of horseradish peroxidase (HRP) and Fourier transform infrared (FT-IR) confirmed the acrylamide (AM) units had been successfully grafted on starch chains. Structural parameters, including degree of branching (DB), degree of substitution (DS) and grafting ratio (GR) were characterized by ¹H nuclear magnetic resonance (¹H NMR), and were correlated with sizing properties of apparent viscosity, adhesion to cotton yarns and film mechanical properties. The apparent viscosity of S-g-PAMs has no obvious correlation with DB and DS (or GR), as the amylose content of the native starch might have more influence on the viscosity of grafted starches. DS (or GR) values of grafted starches have a positive relationship with the tensile strength of sized cotton yarns and are negatively related with tensile strength of starch film. These results can provide guidance in the section of starch with improved sizing properties.