Bacterial cellulose as support for biopolymer stabilized catalytic cobalt nanoparticles

Schiff Base Functionalized Cellulose: Towards Strong Support-Cobalt Nanoparticles Interactions for High Catalytic Performances

A new hybrid catalyst consisting of cobalt nanoparticles immobilized onto cellulose was developed. The cellulosic matrix is derived from date palm biomass waste, which was oxidized by sodium periodate to yield dialdehyde and was further derivatized by grafting orthoaminophenol as a metal ion complexing agent. The new hybrid catalyst was characterized by FT-IR, solid-state NMR, XRD, SEM, TEM, ICP, and XPS. The catalytic potential of the nanocatalyst was then evaluated in the catalytic hydrogenation of 4-nitrophenol to 4-aminophenol under mild experimental conditions in aqueous medium in the presence of NaBH4 at room temperature. The reaction achieved complete conversion within a short period of 7 min. The rate constant was calculated to be K = 8.7 × 10-3 s-1. The catalyst was recycled for eight cycles. Furthermore, we explored the application of the same catalyst for the hydrogenation of cinnamaldehyde using dihydrogen under different reaction conditions. The results obtained were highly promising, exhibiting both high conversion and excellent selectivity in cinnamyl alcohol.

Algae-Based Biopolymers for Batteries and Biofuel Applications in Comparison with Bacterial Biopolymers-A Review

Algae-based biopolymers can be used in diverse energy-related applications, such as separators and polymer electrolytes in batteries and fuel cells and also as microalgal biofuel, which is regarded as a highly renewable energy source. For these purposes, different physical, thermochemical, and biochemical properties are necessary, which are discussed within this review, such as porosity, high temperature resistance, or good mechanical properties for batteries and high energy density and abundance of the base materials in case of biofuel, along with the environmental aspects of using algae-based biopolymers in these applications. On the other hand, bacterial biopolymers are also often used in batteries as bacterial cellulose separators or as biopolymer network binders, besides their potential use as polymer electrolytes. In addition, they are also regarded as potential sustainable biofuel producers and converters. This review aims at comparing biopolymers from both aforementioned sources for energy conversion and storage. Challenges regarding the production of algal biopolymers include low scalability and low cost-effectiveness, and for bacterial polymers, slow growth rates and non-optimal fermentation processes often cause challenges. On the other hand, environmental benefits in comparison with conventional polymers and the better biodegradability are large advantages of these biopolymers, which suggest further research to make their production more economical.

Chitosan hydrogel anchored phthalocyanine supported metal nanoparticles: Bifunctional catalysts for pollutants reduction and hydrogen production

Metal nanoparticles possess high catalytic activity in various organic transformation reactions. A catalyst must be recovered and re-used effectively and economically to lower the overall reaction cost. The recovery of a catalyst remains a challenge due to their extreme small size. In this research work, catalytic metal nanoparticles were synthesized on Zn-phthalocyanine (ZnPc) and chitosan hydrogel (CH) composite which acts as catalyst support. The ZnPc-CH support facilitate the easy recovery of the loaded metal nanoparticles. Metal nanoparticles (M⁰) based on Cu⁰, Ag⁰, Ni⁰, Co⁰ and Fe⁰ were decorated inside and on ZnPc-CH hydrogel surface. The developed M⁰@ZnPc-CH were utilized for the enhanced selective reduction of toxins and hydrogen production by methanolysis and hydrolysis of NaBH₄. Effective catalytic reduction and hydrogen generation was successfully achieved with Co⁰@ZnPc-CH and ZnPc-CH. Under optimized conditions, Co⁰@ZnPc-CH showed complete reduction of 4-nitrophenol (4-NP) in 8.0 min with the fast 4-NP reduction kinetics (K = 0.611 min^-1). Among the developed catalysts, ZnPc-CH showed fast H₂ generation with high H₂ generation rate (HGR = 4100 mLg^-1min^-1) under optimized conditions. Metal leaching from Co⁰@ZnPc-CH was negligible during recycling of the catalyst, suggesting that it could be implemented to 4-NP treatment from real water samples. Similarly, ZnPc-CH could produce same quantity of H₂ throughout 4 continuous cycles of durability testing without any deactivation and leaching and ZnPc-CH showed high stability, indicating the effectiveness of the catalyst to be applied for H₂ production on large scale.

Chitosan-supported metal nanocatalysts for the reduction of nitroaromatics

The second most abundant natural polymer in the earth's crust is chitosan (CS). The unique physical, chemical, structural, and mechanical features of this natural polymer have led to its increased application in a variety of fields such as medicine, catalysis, removal of pollutants, etc. To eliminate various pollutants, it is preferable to employ natural compounds as their use aids the removal of contaminants from the environment. Consequently, employing CS to eliminate contaminants is a viable choice. For this aim, CS can be applied as a template and support for metal nanoparticles (MNPs) and prevent the accumulation of MNPs as well as a reducing and stabilizing agent for the fabrication of MNPs. Among the pollutants present in nature, nitro compounds are an important and wide category of biological pollutants. 4-Nitrophenol (4-NP) is one of the nitro pollutants. There are different ways for the removal of 4-NP, but the best and most effective method for this purpose is the application of a metallic catalyst and a reducing agent. In this review, we report the recent developments regarding CS-supported metallic (nano)catalysts for the reduction of nitroaromatics such as nitrophenols, nitroaniline compounds, nitrobenzene, etc. in the presence of reducing agents. The metals investigated in this study include Ag, Au, Ni, Cu, Ru, Pt, Pd, etc.

Carboxymethyl Cellulose/Copper Oxide–Titanium Oxide Based Nanocatalyst Beads for the Reduction of Organic and Inorganic Pollutants

In this work, we have developed novel beads based on carboxymethyl cellulose (CMC) encapsulated copper oxide-titanium oxide (CuO-TiO2) nanocomposite (CMC/CuO-TiO2) via Al+3 cross-linking agent. The developed CMC/CuO-TiO2 beads were applied as a promising catalyst for the catalytic reduction of organic and inorganic contaminants; nitrophenols (NP), methyl orange (MO), eosin yellow (EY) and potassium hexacyanoferrate (K3[Fe(CN)6]) in the presence of reducing agent (NaBH4). CMC/CuO-TiO2 nanocatalyst beads exhibited excellent catalytic activity in the reduction of all selected pollutants (4-NP, 2-NP, 2,6-DNP, MO, EY and K3[Fe(CN)6]). Further, the catalytic activity of beads was optimized toward 4-nitrophenol with varying its concentrations and testing different concentrations of NaBH4. Beads stability, reusability, and loss in catalytic activity were investigated using the recyclability method, in which the CMC/CuO-TiO2 nanocomposite beads were tested several times for the reduction of 4-NP. As a result, the designed CMC/CuO-TiO2 nanocomposite beads are strong, stable, and their catalytic activity has been proven.

The versatility of nanocellulose, modification strategies, and its current progress in wastewater treatment and environmental remediation

Deterioration in the environmental ecosystems through the depletion of nonrenewable resources and the burden of deleterious contaminants is considered a global concern. To this end, great interest has been shown in the use of renewable and environmentally-friendly reactive materials dually to promote environmental sustainability and cope with harmful contaminants. Among the different available options, the use of nanocellulose (NC) as an environmentally benign and renewable natural nanomaterial is an attractive candidate for environmental remediation owing to its miraculous physicochemical characteristics. This review discusses the intrinsic properties and the structural aspects of different types of NC, including cellulose nanofibrils (CNFs), cellulose nanocrystals (CNCs), and bacterial cellulose (BC) or bacterial nanocellulose (BNC). Also, the different modification strategies involving the functionalization or hybridization of NC by using different functional and reactive materials aimed at wastewater remediation have been elaborated. The modified or hybridized NC has been explored for its applications in the removal or degradation of aquatic contaminants through adsorption, filtration, coagulation, catalysis, photocatalysis, and pollutant sensing. This review highlights the role of NC in the modified composites and describes the underlying mechanisms involved in the removal of contaminants. The life-cycle assessment (LCA) of NC is discussed to unveil the hidden risks associated with its production to the final disposal. Moreover, the contribution of NC in the promotion of waste management at different stages has been described in the form of the five-Rs strategy. In summary, this review provides rational insights to develop NC-based environmentally-friendly reactive materials for the removal and degradation of hazardous aquatic contaminants.

Trimesic acid-modified magnetic gum as a highly efficient and recyclable biocatalyst for the one-pot green synthesis of condensation reactions

In this work, a novel and efficient magnetic biocatalyst was designed, prepared and identified using cherry tree gum as a biopolymer functionalized with 1,3,5-benzenetricarboxylic acid (gum@Fe₃O₄@BTA). The obtained biocatalyst was prepared using available and cheap materials in an easy process. This biocatalyst was used as an efficient catalyst with high catalytic activity for the synthesis of a three-component one-pot protocol and four-component one-pot protocol of tetrahydro-4H-chromene derivatives and polyhydroquinoline derivatives in EtOH green solvent under reflux conditions, respectively. The synthesized heterogeneous biocatalysts were identified and analyzed by FT-IR, EDS, FESEM, TGA and XRD techniques. The synthesis of tetrahydro-4H-chromene and polyhydroquinoline derivatives by using this biocatalyst has advantages such as high efficiency, short reaction time, simple work method, absence of dangerous solvents, environmentally friendly conditions, easy separation of the biocatalyst by an external magnet, and the ability reuse for five periods without significant decrease in catalytic activity.

Copper Nanoparticles Decorated Alginate/Cobalt-Doped Cerium Oxide Composite Beads for Catalytic Reduction and Photodegradation of Organic Dyes

Cobalt-doped cerium oxide (Co-CeO₂) was synthesized and wrapped inside alginate (Alg) hydrogel beads (Alg/Co-CeO₂). Further, copper nanoparticles (Cu) were grown on Alg/Co-CeO₂ beads. Cu decorated Alg/Co-CeO₂ composite beads (Cu@Alg/Co-CeO₂) were tested as a catalyst for the solar-assisted photodegradation and NaBH₄-assisted reduction of organic pollutants. Among different dyes, Cu@Alg/Co-CeO₂ was found to be the best catalyst for the photodegradation of acridine orange (ArO) under solar light and efficient in reducing methyl orange (MO) with the aid of NaBH₄. Cu@Alg/Co-CeO₂ decolorized ArO up to 75% in 5 h under solar light, while 97% of MO was reduced in 11 min. The decolorization efficiency of Cu@Alg/Co-CeO₂ was further optimized by varying different parameters. Thus, the designed catalyst provides a promising way for efficient oxidation and reduction of pollutants from industrial effluents.

Fabrication of 3D Gelatin Hydrogel Nanocomposite Impregnated Co-Doped SnO2 Nanomaterial for the Catalytic Reduction of Environmental Pollutants

In the catalytic reduction of various environment pollutants, cobalt-doped tin oxide, i.e., Co-SnO₂ intercalated gelatin (GL) hydrogel nanocomposite was prepared via direct mixing of Co-SnO₂ doped with GL. Then, it was crosslinked internally using formaldehyde within a viscous solution of gelatin polymer, which led to the formation of GL/Co-SnO₂ hydrogel nanocomposite. GL/Co-SnO₂ hydrogel nanocomposite was fully characterized by using field-emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), powder X-ray diffraction (XRD), and attenuated total reflection–Fourier transform infrared spectroscopy (ATR-FTIR). The FESEM images indicate that the Co-SnO₂ composite has a spherical structure on the GL matrix while EDX elucidates the elemental composition of each atom in the crosslinked GL/Co-SnO₂ hydrogel nanocomposite. The GL/Co-SnO₂ nanocomposite was checked for the reduction of various pollutants, including 2-nitro-phenol (2-NP), 2,6-dinitro-phenol (2,6-DNP), 4-nitro-phenol (4-NP), Congo red (CR), and methyl orange (MO) dyes with a strong sodium borohydride (NaBH₄) reducing agent. The GL/Co-SnO₂ nanocomposite synergistically reduced the MO in the presence of the reducing agent with greater reduction rate of 1.036 min⁻¹ compared to other dyes. The reduction condition was optimized by changing various parameters, such as the catalyst amount, dye concentration, and the NaBH₄ amount. Moreover, the GL/Co-SnO₂ nanocomposite catalyst can be easily recovered, is recyclable, and revealed minimal loss of nanomaterials.

Role of silver nanoparticles in fluorimetric determination of urea in urine samples

Herein, an economical, analytical and sensitive method was established for the fluorometric determination of urea using freshly prepared silver nanoparticles (Ag-NPs) in real urine samples. The standard addition and second-order derivative methods were selected for the ongoing research work to eliminate the possible effect of interferences in a real environment. In this work, Ag-NPs were prepared by reducing silver nitrate salt in the presence of 1,3-di-(1H-imidazole-1-yl) -2-propanol (DIPO) in an aqueous medium. Urea in the urine samples was successfully determined through the complexation of Ag-NPs with urea molecules. The results revealed high percent recovery with ± RSD of urea in the three different urine samples, where percent recoveries by spectrofluorometric standard addition were 99.77 ± 3.4, 100.24 ± 5.1, 100.93 ± 2.8 and that is by the spectrofluorometric second-order derivative method were 103.57 ± 2.4, 101.8 ± 1.3, 98 ± 3.2, respectively. The successful application of these analytical methods in the spectrofluorometric determination of urea in urine samples can accumulate further addition in the effects and possible role of Ag-NPs in the determination of biological molecules in biological and non-biological samples in the scientific as well as clinical fields.

Efficient fabrication, antibacterial and catalytic performance of Ag-NiO loaded bacterial cellulose paper

This study reports the synthesis of bacterial cellulose (BC) hydrogel sheets and their utilization as a support for silver‑nickel oxide nanocomposites (Ag/NiO). A two-step facile hydrothermal method was employed for the preparation of Ag/NiO, followed by impregnation into BC hydrogel sheets. A 20% Ag/NiO composition was revealed by dry weight analysis. The stability of nanocomposites-Hydrogel was confirmed by Ag⁺ and Ni²⁺ ion release study. The catalytic activity of the BC-Ag/NiO was evaluated against chemical reduction of congo red, methyl orange and methylene blue. The reduction reaction followed pseudo first order kinetics and k_app values of 0.1147 min^-1, 0.1323 min^-1 and 0.12989 min^-1 were obtained for CR, MO, and MB dyes, respectively. The BC-Ag/NiO catalyst could be easily recovered and re-used in another reaction without centrifugation. The synthesized nanocomposites hydrogel was also tested for its antibacterial activity against Gram-negative bacteria, Escherichia coli (E.coli) and Gram-positive bacteria, Staphylococcus aureus (S.aureus).

Nanoarchitectured Cu based catalysts supported on alginate/glycyl leucine hybrid beads for tainted water treatment

Water pollution reached worrying point due to different dye pollutants which demands an instant solution. One of the best ways to manage water pollutants is their reduction and decolorization to less-toxic and useful compounds. However, reduction process requires an effective, stable, and recyclable catalyst to reduce such pollutants more effectively. Metal nanoparticles (M⁰) are highly effective catalysts but separation of nanoparticles after reaction is difficult and requires a high-speed centrifugation. If loaded on polymer-beads, they can be easily separated from the reaction-mixture. Hearin, alginate/glycyl leucine (AGL) hybrid-beads were prepared, and copper nanoparticles (Cu⁰) were grown on it by simple process. M⁰/AGL bead catalysts were tested toward reducing various toxic compounds. Among all developed composite-beads, the catalytic performance of Cu⁰/AGL was highest in terms of reduction kinetics. After initial screening for different pollutants, Cu⁰/AGL was much more effective for MO reduction, thus, all optimized different parameters i.e., catalyst dosage, stability, amount of reducing-agent and recyclability were experimentally determined. The Cu⁰/AGL showed high-rate constants (k_app) of 0.7566 and 2.9506 min^-1 depending on beads content. The reusability of the Cu⁰/AGL catalysts up to the 7^th cycle has been checked. With the use of AGL as support for the Cu nanoparticles, not only the catalytic activity was retained for longer times during reusability, but it helped in their easy separation.

Synthesis of Activated Carbon from Trachycarpus fortunei Seeds for the Removal of Cationic and Anionic Dyes

The removal of dyes from industrial effluents is one of the most important industrial processes that is currently on academic demand. In this project, for the first time, Trachycarpus fortunei seeds are used as biosources for the synthesis of activated carbon (AC) using physical as well as acid–base chemical methods. The synthesized AC was initially characterized by different instrumental techniques, such as FTIR, BET isotherm, SEM, EDX and XRD. Then, the prepared activated carbon was used as an economical adsorbent for the removal of xylenol orange and thymol blue from an aqueous solution. Furthermore, the effect of different parameters, i.e., concentration of dye, contact time, pH, adsorbent amount, temperature, adsorbent size and agitation speed, were investigated in batch experiments at room temperature. The analysis of different techniques concluded that the pyrolysis method created a significant change in the chemical composition of the prepared AC and the acid-treated AC offered a high carbon/oxygen composite, which is graphitic in nature. The removal of both dyes (xylenol orange and thymol blue) was increased with the increase in the dye’s initial concentration. Isothermal data suggested that the adsorption of both dyes follows the Langmuir model compared to the Freundlich model. The equilibrium time for AC biomass to achieve the removal of xylenol orange and thymol blue dyes was determined to be 60 min, and the kinetic data suggested that the adsorption of both dyes obeyed the pseudo-second order model. The optimal pH for thymol blue adsorption was pH 6, while it was pH 2 for xylenol orange. The adsorption of both dyes increased with the increase in the temperature. The influence of the adsorbent amount indicated that the adsorption capacity (mg/g) of both dyes reduced with the rise in the adsorbent amount. Thus, the current study suggests that AC prepared by an acid treatment from Trachycarpus fortunei seeds is a good, alternative, cost effective, and eco-friendly adsorbent for the effective removal of dyes from polluted water.

Chitosan@Carboxymethylcellulose/CuO-Co2O3 Nanoadsorbent as a Super Catalyst for the Removal of Water Pollutants

In this work, an efficient nanocatalyst was developed based on nanoadsorbent beads. Herein, carboxymethyl cellulose–copper oxide-cobalt oxide nanocomposite beads (CMC/CuO-Co2O3) crosslinked by using AlCl3 were successfully prepared. The beads were then coated with chitosan (Cs), Cs@CMC/CuO-Co2O3. The prepared beads, CMC/CuO-Co2O3 and Cs@CMC/CuO-Co2O3, were utilized as adsorbents for heavy metal ions (Ni, Fe, Ag and Zn). By using CMC/CuO-Co2O3 and Cs@CMC/CuO-Co2O3, the distribution coefficients (Kd) for Ni, Fe, Ag and Zn were (41.166 and 6173.6 mLg−1), (136.3 and 1500 mLg−1), (20,739.1 and 1941.1 mLg−1) and (86.9 and 2333.3 mLg−1), respectively. Thus, Ni was highly adsorbed by Cs@CMC/CuO-Co2O3 beads. The metal ion adsorbed on the beads were converted into nanoparticles by treating with reducing agent (NaBH4) and named Ni/Cs@CMC/CuO-Co2O3. Further, the prepared nanoparticles-decorated beads (Ni/Cs@CMC/CuO-Co2O3) were utilized as nanocatalysts for the reduction of organic and inorganic pollutants (4-nitophenol, MO, EY dyes and potassium ferricyanide K3[Fe(CN)6]) in the presence of NaBH4. Among all catalysts, Ni/Cs@CMC/CuO-Co2O3 had the highest catalytic activity toward MO, EY and K3[Fe(CN)6], removing up to 98% in 2.0 min, 90 % in 6.0 min and 91% in 6.0 min, respectively. The reduction rate constants of MO, EY, 4-NP and K3[Fe(CN)6] were 1.06 × 10−1, 4.58 × 10−3, 4.26 × 10−3 and 5.1 × 10−3 s−1, respectively. Additionally, the catalytic activity of the Ni/Cs@CMC/CuO-Co2O3 beads was effectively optimized. The stability and recyclability of the beads were tested up to five times for the catalytic reduction of MO, EY and K3[Fe(CN)6]. It was confirmed that the designed nanocomposite beads are ecofriendly and efficient with high strength and stability as catalysts for the reduction of organic and inorganic pollutants.

Catalytic Reduction of Environmental Pollutants with Biopolymer Hydrogel Cross-Linked Gelatin Conjugated Tin-Doped Gadolinium Oxide Nanocomposites

In the present study, a biopolymer nanocomposite hydrogel based on gelatin and tin-doped gadolinium oxide (Sn-Gd₂O₃@GH) was prepared for the efficient reduction of water pollutants. The method of Sn-Gd₂O₃@GH preparation consisted of two steps. A Sn-Gd₂O₃ nanomaterial was synthesized by a hydrothermal method and mixed with a hot aqueous solution (T > 60 °C) of gelatin polymer, followed by cross-linking. Due to the presence of abundant functional groups on the skeleton of gelatin, such as carboxylic acid (–COOH) and hydroxyl (–OH), it was easily cross-linked with formaldehyde. The structure, morphology, and composition of Sn-Gd₂O₃@GH were further characterized by the FESEM, XRD, EDX, and FTIR techniques. The FESEM images located the distribution of the Sn-Gd₂O₃ nanomaterial in a GH matrix of 30.06 nm. The XRD patterns confirmed the cubic crystalline structure of Gd₂O₃ in a nanocomposite hydrogel, while EDS elucidated the elemental composition of pure Sn-Gd₂O₃ powder and cross-linked the Sn-Gd₂O₃@GH samples. The synthesized Sn-Gd₂O₃@GH nanocomposite was used for the removal of different azo dyes and nitrophenols (NPs). It exhibited an efficient catalytic reduction of Congo red (CR) with a reaction rate of 9.15 × 10⁻¹ min⁻¹ with a strong NaBH₄-reducing agent. Moreover, the Sn-Gd₂O₃@GH could be easily recovered by discharging the reduced (colourless) dye, and it could be reused for a fresh cycle.

Catalytic reduction of 4-nitrophenol and methylene blue pollutants in water by copper and nickel nanoparticles decorated polymer sponges

In the present study, two catalysts based-on copper and nickel nanoparticles anchored on agarose-coated sponge (Cu-AG-sponge and Ni-AG-sponge) were prepared, respectively. Both catalysts were characterized by analytical techniques of thermogravimetric analysis energy dispersive X-ray spectroscopy (EDX) and scanning electron microscopy (SEM). Spherical Cu and Ni nanoparticles on struts of AG-coated sponge were observed by FESEM and the samples' elemental composition was confirmed by EDX technique. After characterization, the Cu-AG-sponge and Ni-AG-sponge catalysts were tested in 4-nitrophenol (4-NP) and methylene blue dye (MB) reduction in an aqueous medium. The reduction of the 4-NP to 4-aminophenol (4-AP) was achieved up to 95% using the NaBH₄ reductant and Cu-AG-sponge and Ni-AG-sponge catalysts, respectively. Similarly, the rate of reduction of MB was faster for the Cu-AG-sponge as compared to the Ni-AG-sponge which was discussed based-on the catalyst morphology and other factors. The high rate of reactions for the 4-NP and MB reduction suggests that the Cu-AG-sponge and Ni-AG-sponge catalyst possess high catalytic efficiency, low cost and good reusability having the potential to be used in similar other reactions.

Facile synthesis, physiochemical characterization and bio evaluation of sulfadimidine capped cobalt nanoparticles

Due to their less expensive, environment friendly nature, and their natural abundance of cobalt have attained more significant attention for the synthesis of cobalt nanoparticles. In the present study, we report the facile synthesis of cobalt nanoparticles using a straight forward chemical reduction approach of cobalt chloride with sodium borohydride and capping of sulfadimidine. sulfadimidine has strong capping eligibility on the surface of nanoparticles due to its chemical stability and is an applicable as stabilizer due to the existence of an amine bond. The as-synthesized sulfadimidine stabilized cobalt nanoparticles (Co-SD NPs) were characterized by using various spectroscopic and microscopic analysis like UV-Visible spectroscopy (UV-Vis), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), High-Resolution Transmission electron microscopy (HR-TEM), and Fourier-transform infrared spectroscopy (FT-IR). The XRD analysis exhibited the triclinic crystal structure of the as-synthesized cobalt nanoparticles and FT-IR analysis confirmed the capping of sulfadimidine via monodentate interaction. The HR-TEM analysis displayed the size of the cobalt nanoparticles approximately 3-5 nm. The antibacterial properties of the sulfadimidine stabilized cobalt nanoparticles (Co-SD NPs) were tested against various bacterial strains such as Klebsiella pneumonia (KP), Escherichia coli (EC) and Pseudomonas syringae (PS) by using agar disc diffusion approach. The results of sulfadimidine capped cobalt nanoparticles displayed the enhanced biological properties against the tested gram-negative bacteria.

Highly Active Cellulose-Supported Poly(hydroxamic acid)-Cu(II) Complex for Ullmann Etherification

Highly active natural pandanus-extracted cellulose-supported poly(hydroxamic acid)-Cu(II) complex 4 was synthesized. The surface of pandanus cellulose was modified through graft copolymerization using purified methyl acrylate as a monomer. Then, copolymer methyl acrylate was converted into a bidentate chelating ligand poly(hydroxamic acid) via a Loosen rearrangement in the presence of an aqueous solution of hydroxylamine. Finally, copper species were incorporated into poly(hydroxamic acid) via the adsorption process. Cu(II) complex 4 was fully characterized by Fourier transform infrared (FTIR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray (EDX), transmission electron microscopy (TEM), inductively coupled plasma optical emission spectrometry (ICP-OES), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses. The cellulose-supported Cu(II) complex 4 was successfully applied (0.005 mol %) to the Ullmann etherification of aryl, benzyl halides, and phenacyl bromide with a number of aromatic phenols to provide the corresponding ethers with excellent yield [benzyl halide (70-99%); aryl halide (20-90%)]. Cu(II) complex 4 showed high stability and was easily recovered from the reaction mixture. It could be reused up to seven times without loss of its original catalytic activity. Therefore, Cu(II) complex 4 can be commercially utilized for the preparation of various ethers, and this synthetic technique could be a part in the synthesis of natural products and medicinal compounds.

Chronicle of Nanocelluloses (NCs) for Catalytic Applications: Key Advances

Nanocellulose (NC) is a biomaterial with growing interest in the field of nanocomposites and sustainable materials. NC has various applications including biodegradable materials, reinforcing agents, packaging films, transpiring membranes and medical devices. Among the many applications, the use of NC functionalized with organic and inorganic groups has found wide use as a catalyst in chemical transformations. The goal of this review is to collect the current knowledge on its catalytic applications for chemical groups conversion. We have chosen to organize the manuscript according to subdivision of NC into Bacterial Nanocellulose (BNC), Cellulose Nanocrystals (CNCs), and Cellulose Nanofibers (CNFs) and their role as inorganic- and organic-functionalized NC-catalysts in organic synthesis. However, in consideration of the fact that the literature on this field is very extensive, we have decided to focus our attention on the scientific productions of the last five years.

Functionalization of biopolymer fibers with magnetic nanoparticles

Hybrid fibers consisting of biopolymers and inorganic nanoparticles are receiving increasing attention due to their unique properties. Commonly, the nanoparticles are chosen for their intrinsic properties such as magnetic, thermal, or electrical conductivity. The biopolymer component of the hybrid fiber is chosen for its mechanical properties and ability to act as a scaffold or matrix for the nanoparticles. While there are many fiber-forming synthetic polymers, there has been a recent interest in replacing these systems with biopolymers due to their sustainability, biocompatibility, nontoxicity, and biodegradability. Fibers made from biopolymers have one additional benefit over synthetic polymers as they make good scaffolds for embedding nanoparticles without the need of any additional bonding agents. In particular, naturally occurring biopolymers such as proteins exhibit a myriad of interactions with nanoparticles, including ionic, H-bonding, covalent, Van der Waals, and electrostatic interactions. The diverse range of interactions between magnetic nanoparticles and biopolymers makes resulting hybrid fibers of particular interest as magnetic-responsive materials. Magnetically responsive hybrid biopolymer fibers have many features, including enhanced thermal stabilities, strong mechanical toughness, and perhaps most interestingly multifunctionality, allowing for a wide range of applications. These applications range from biosensing, filtration, UV shielding, antimicrobial, and medical applications, to name a few. Here, we review established hybrid fibers consisting of biopolymers and nanoparticles with a primary focus on biopolymers doped with magnetic nanoparticles and their various putative applications.

Carboxymethyl cellulose nanocomposite beads as super-efficient catalyst for the reduction of organic and inorganic pollutants

Carboxymethyl cellulose/copper oxide-nickel oxide (CMC/CuO-NiO) nanocomposite beads were prepared by facile, simple and environmentally friendly method. Initially, CuO-NiO was prepared and applied for the catalytic reduction of 4-nitrophenol (4-NP). The results showed that CuO-NiO demonstrate high catalytic activity toward the reduction of 4-NP to 4-aminophenol (4-AP) with a rate constant of 2.97 × 10^-2 s^-1. Further, CuO-NiO were well-dispersed in the polymeric matrix of carboxymethyl cellulose to prepare CMC/CuO-NiO beads. CMC/CuO-NiO nanocomposite beads were also applied to catalyze the reduction of potassium ferrocyanide (K₃Fe (CN)₆), 4-NP, Congo red (CR) and Eosin yellow (EY) in the presence of sodium borohydride. Experimental data indicated that CMC/CuO-NiO nanocomposite has higher catalytic activity and high rate constant compared to CuO-NiO. The rate constant found to be 6.88 × 10^-2, 6.27 × 10^-2, 1.89 × 10^-2 and 2.43 × 10^-2 for K₃Fe(CN)₆, 4-NP, CR and EY, respectively, using 5 mg CMC/CuO-NiO beads. FE-SEM, EDX, FTER, XRD and XPS were used to characterize the nanocomposites. CMC/CuO-NiO beads catalytically reduced up to 95-99% of K₃Fe(CN)₆, 4-NP, CR and EY within 40, 60, 120 and 120 s. CMC/CuO-NiO beads were found more selective for the reduction of 4-NP. The catalytic reduction performance of CMC/CuO-NiO beads was optimized by studying the influence of different parameters on the catalytic reduction of 4-NP. Hence, the effective and super catalytic performance toward the reduction of different organic and inorganic pollutants makes CMC/CuO-NiO beads a smart material and suitable for numerous scientific and industrial applications and may be used as an alternative to high-cost commercial catalysts.

A template of cellulose acetate polymer-ZnAl/C layered double hydroxide composite fabricated with Ni NPs: Applications in the hydrogenation of nitrophenols and dyes degradation

In this work, cellulose acetate polymer (CA) sheet and 2% ZnAl grafted on activated carbon grown in the form of layered double hydroxide (ZnAl/C-LDH) incorporated into CA polymer (CA-ZA2) 5 wt% (CA-ZA5) and 10 wt% of ZnAl/C-LDH (CA-ZA10) sheets were synthesized by simple casting method. All the stated sheets were fabricated with zero-valent Ni nanoparticles by adsorption of Ni⁺² ions followed by subsequent reduction with NaBH₄ and named as CA@Ni, CA-ZA2@Ni, CA-ZA5@Ni, and CA-ZA10@Ni NPs. The synthesized Ni NPs were investigated through FESEM, FTIR, XRD and EDS techniques. These supported and stabilized Ni NPs were largely used for the reduction of 4-nitrophenol (PNP), and 2-nitrophenol (ONP) in the presence of NaBH₄ which act as a reducing agent. Similarly, the catalytic efficiency was also assessed against the removal of dyes. The linear relationship and K_app were obtained from pseudo-first-order kinetics. The rate constant K_app of CA@Ni NPs for the reduction of PNP is 1.5 × 10^-1 and CA-ZA2@Ni (K_app = 2.6 × 10^-1), CA-ZA5@Ni (K_app = 3.2 × 10^-1), and CA-ZA10@Ni is 5.7 × 10^-1 min^-1. The highest rate constant for PNP reduction was observed with CA-ZA10@Ni NPs. The rate of CR removal with ZA10@Ni NPs is 2.05 × 10^-1 while the adjacent R² is 0.9013. Similarly, the rate constant and adjacent R² values were calculated for the degradation of other dyes and nitrophenols.

In-situ stabilization of silver nanoparticles in polymer hydrogels for enhanced catalytic reduction of macro and micro pollutants

The in-situ stabilization of Ag nanoparticles is carried out by the use of reducing agent and synthesized three different types of hydrogen (anionic, cationic, and neutral) template. The morphology, constitution and thermal stability of the synthesized pure and Ag-entrapped hybrid hydrogels were efficiently confirmed using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and thermo gravimetric analysis (TGA). The prepared hybrid hydrogels were used in the decolorization of methylene blue (MB) and azo dyes congo red (CR), methyl Orange (MO), and reduction of 4-nitrophenol (4-NP) and nitrobenzene (NB) by an electron donor NaBH4. The kinetics of the reduction reaction was also assessed to determine the activation parameters. The hybrid hydrogen catalysts were recovered by filtration and used continuously up to six times with 98% conversion of pollutants without substantial loss in catalytic activity. It was observed that these types of hydrogel systems can be used for the conversion of pollutants from waste water into useful products.

Catalytic potential of cobalt oxide and agar nanocomposite hydrogel for the chemical reduction of organic pollutants

In this study, cobalt oxide nanoparticles (Co₃O₄ NPs) were synthesized by precipitation method from cobalt sulphate solution with basic pH, followed by calcination. The ex-situ synthesized Co₃O₄ NPs were mixed with hot agar (AG) aqueous solution. The preparation of AG- Co₃O₄ nanocomposite hydrogel was carried out by self-association method promoted by thermal denaturation. The quenching of hot suspension from 80 °C to room temperature resulted in the formation of AG-Co₃O₄ nanocomposite hydrogel. The as-synthesized AG-Co₃O₄ was characterized by FTIR, XRD and SEM techniques. In order to test the catalytic activity, AG-Co₃O₄ was used as a heterogeneous catalyst for the reduction of methylene blue (MB), congo red (CR) and 4-nitrophenol (4-NP). The excellent performance of the AG-Co₃O₄ was shown by the reaction rate constant (k_app) values of 0.3623, 0.2114 and 0.2893 for MB, 4-NP and CR, respectively. All these results were obtained with R² above 94 and utilization of an AG-Co₃O₄ catalyst. Furthermore, the catalytic reduction was studied with varying dye concentration and catalyst dose. This study showed that AG-Co₃O₄ catalyst has high potential for remediation of environmental pollutants in wastewaters.

Switching from Conventional to Nano-natural Phytochemicals to Prevent and Treat Cancers: Special Emphasis on Resveratrol

BACKGROUND

Natural phytochemicals and their derivatives have been used in medicine since prehistoric times. Natural phytochemicals have potential uses against various disorders, including cancers. However, due to low bioavailability, their success in clinical trials has not been reproduced. Nanotechnology has played a vital role in providing new directions for diagnosis, prevention, and treatment of different disorders, and of cancer in particular. Nanotechnology has demonstrated the capability to deliver conventional natural products with poor solubility or a short half-life to target specific sites in the body and regulate the release of drugs. Among the natural products, the phytoalexin resveratrol has demonstrated therapeutic effects, including antioxidant, antiinflammatory, and anti-proliferative effects, as well as the potential to inhibit the initiation and promotion of cancer. However, low water solubility and extensive first-pass metabolism lead to poor bioavailability of resveratrol, hindering its potential. Conventional dosage forms of resveratrol, such as tablets, capsules, dry powder, and injections, have met with limited success. Nanoformulations are now being investigated to improve the pharmacokinetic characteristics, as well as to enhance the bioavailability and targetability of resveratrol.

OBJECTIVES

This review details the therapeutic effectiveness, mode of action, and pharmacokinetic limitations of resveratrol, as well as discusses the successes and challenges of resveratrol nanoformulations. Modern nanotechnology techniques to enhance the encapsulation of resveratrol within nanoparticles and thereby enhance its therapeutic effects are emphasized.

CONCLUSION

To date, no resveratrol-based nanosystems are in clinical use, and this review would provide a new direction for further investigations on innovative nanodevices that could consolidate the anticancer potential of resveratrol.

Pollution, Toxicity and Carcinogenicity of Organic Dyes and their Catalytic Bio-Remediation

Water pollution due to waste effluents of the textile industry is seriously causing various health problems in humans. Water pollution with pathogenic bacteria, especially Escherichia coli (E. coli) and other microbes is due to the mixing of fecal material with drinking water, industrial and domestic sewage, pasture and agricultural runoff. Among the chemical pollutants, organic dyes due to toxic nature, are one of the major contaminants of industrial wastewater. Adequate sanitation services and drinking quality water would eliminate 200 million cases of diarrhea, which results in 2.1 million less deaths caused by diarrheal disease due to E. coli each year. Nanotechnology is an excellent platform as compared to conventional treatment methods of water treatment and remediation from microorganisms and organic dyes. In the current study, toxicity and carcinogenicity of the organic dyes have been studied as well as the remediation/inactivation of dyes and microorganism has been discussed. Remediation by biological, physical and chemical methods has been reviewed critically. A physical process like adsorption is cost-effective, but can't degrade dyes. Biological methods were considered to be ecofriendly and cost-effective. Microbiological degradation of dyes is cost-effective, eco-friendly and alternative to the chemical reduction. Besides, certain enzymes especially horseradish peroxidase are used as versatile catalysts in a number of industrial processes. Moreover, this document has been prepared by gathering recent research works related to the dyes and microbial pollution elimination from water sources by using heterogeneous photocatalysts, metal nanoparticles catalysts, metal oxides and enzymes.

Photodegradation of 4-nitrophenol over B-doped TiO2 nanostructure: effect of dopant concentration, kinetics, and mechanism

The 4-nitrophenol (4-NP) is one of the carcinogenic pollutants listed by US EPA and has been detected in industrial wastewater. This study investigates the photocatalytic degradation of 4-NP with TiO₂ and boron (B)-doped TiO₂ nanostructures. The degradation on undoped and B-doped TiO₂ with various boron loadings (1-7%) was studied to establish a relationship between structure, interface, and photo-catalytic properties. The results of XRD, micro Raman, FTIR, and HRTEM show that the B doping has improved the crystallinity and induces rutile phase along with anatase (major phase). The N₂ adsorption-desorption, SEM-EDX, and XPS indicated that the B induced the formation of mesoporous nanostructures in TiO₂ and occupies interstitial sites by forming Ti-O-B type linkage. The surface area of pure TiO₂ was decreased from 235.4 to 63.3 m²/g in B-TiO₂. The photo-physical properties were characterized by UV-Vis DRS, which showed decrease in the optical band-gap of pure TiO₂ (2.98 eV) to B-TiO₂ (2.95 eV). The degradation results demonstrated that the B doping improved the photocatalytic activity of TiO₂; however, this improvement depends on the B concentration in doped TiO₂. B-doped TiO₂ (> 5% B) showed 90 % degradation of 4-NP, whereas the undoped TiO₂ can degrade only 79 % of 4-NP. The degradation followed pseudo-first-order kinetics with rate constant values of 0.006 min^-1 and 0.0322 min^-1 for pure TiO₂ and B-TiO₂ respectively. The existence of a reduced form of Ti³⁺ on the surface of TiO₂ (as evidence from XPS) was found responsible for enhancement in photocatalytic activity.

Lignocellulosic biomass supported metal nanoparticles for the catalytic reduction of organic pollutants

Lignocellulosic biomass waste is a cheap, eco-friendly, and sustainable raw material for a wide array of applications. In the present study, an easy, fast, and economically feasible route has been proposed for the preparation of different zero-valent metal nanoparticles (ZV-MNPs) based on Cu, Co, Ag, and Ni NPs using empty fruit bunch (EFB) biomass residue as support material. The catalytic efficiency of ZV-MNPs/EFB catalyst was investigated against five model pollutants, such as methyl orange (MO), congo red (CR), methylene blue (MB), acridine orange (AO), and 4-nitrophenol (4-NP) using NaBH₄ as a source of hydrogen and electron. Comparative study revealed that among as-prepared ZV-MNPs/EFB catalysts, Cu-NPs immobilized onto EFB (Cu/EFB) exhibited maximum catalytic efficiency towards pollutant abasement. Degradation reactions were highly efficient, and were completed within a short time (4 min) in case of MO, CR, and MB, whilst AO and 4-NP were reduced in less than 15 min. Kinetic investigation revealed that the degradation rate of model pollutants accorded with pseudo-first order model. Furthermore, supported catalysts were easily recovered after the completion of experiment by simply pulling the catalyst from reaction system. Recyclability tests performed on Cu/EFB revealed that more than 97% of the reduction was achieved in case of MO dye for four successive cycles of reuse. The as-prepared heterostructure showed multifunctional properties, such as enhanced uptake of contaminants, high catalytic efficiency, and easy recovery, hence, offers great prospects in wastewater purification.

Comparative Synthesis and Characterization of Bio-Cellulose from Local Waste and Cheap Resources

Background:

Bacterial cellulose (BC) has been extensively utilized in a wide range of applications specifically in the biomedical field thanks to its excellent physico-chemical and biological features. The major limitation restricting its application in certain areas is its high production cost. Its widespread applications demand exploration of alternative production media compared to the existing expensive ones. Herein, an effort has been made to utilize waste and cheaply available local resources including; waste (expired) orange juice (WOJ), sugarcane juice (SC) and coconut water (CW) as alternative media for BC production in comparison to the synthetic media (control).

Methods:

Waste and cheap resources were collected from the local market, screened filtered and optimized for the development of BC culture media. BC production from all media was observed under static cultivation for 10 days. The results indicated 2.75, 2.56, 3.32 and 1.68 g/L BC production that corresponded to 27.5%, 21.7 %, 20.1 % and 31.6 % sugar to BC conversion from control, WOJ, SC and CW media, respectively. Morphology and crystalline features of produced BC samples were observed through FE-SEM and XRD analysis. It was noteworthy that BC produced from all alternative sources indicated high water holding capabilities (WHC) and water retention time (WRT) that augment their applicability in drug delivery and wound healing applications.

Conclusion:

The BC production from cheap resources and its high physical, mechanical and biological properties can be of high interest for scaling up and commercialization of BC production processes. Furthermore, its liquidabsorbing capabilities and retention time can help in drug carrying and medical application.

Functionalized Bacterial Cellulose Microparticles for Drug Delivery in Biomedical Applications

Background:

Bacterial cellulose (BC) has recently attained greater interest in various research fields, including drug delivery for biomedical applications. BC has been studied in the field of drug delivery, such as tablet coating, controlled release systems and prodrug design.

Objective:

In the current work, we tested the feasibility of BC as a drug carrier in microparticulate form for potential pharmaceutical and biomedical applications.

Method :

For this purpose, drug-loaded BC microparticles were prepared by simple grinding and injection moulding method through regeneration. Model drugs, i.e., cloxacillin (CLX) and cefuroxime (CEF) sodium salts were loaded in these microparticles to assess their drug loading and release properties. The prepared microparticles were evaluated in terms of particle shapes, drug loading efficiency, physical state of the loaded drug, drug release behaviour and antibacterial properties.

Results:

The BC microparticles were converted to partially amorphous state after regeneration. Moreover, the loaded drug was transformed into the amorphous state. The results of scanning electron microscopy (SEM) showed that microparticles had almost spherical shape with a size of ca. 350-400 μm. The microparticles treated with higher drug concentration (3%) exhibited higher drug loading. Keeping drug concertation constant, i.e., 1%, the regenerated BC (RBC) microparticles showed higher drug loading (i.e., 37.57±0.22% for CEF and 33.36±3.03% for CLX) as compared to as-synthesized BC (ABC) microparticles (i.e., 9.46±1.30% for CEF and 9.84±1.26% for CLX). All formulations showed immediate drug release, wherein more than 85% drug was released in the initial 30 min. Moreover, such microparticles exhibited good antibacterial activity with larger zones of inhibition for drug loaded RBC microparticles as compared to corresponding ABC microparticles.

Conclusion :

Drug loaded BC microparticles with immediate release behaviour and antibacterial activity were fabricated. Such functionalized microparticles may find potential biomedical and pharmaceutical applications.