Effect of Smilax china L. starch on the gel properties and interactions of calcium sulfate-induced soy protein isolate gel

Creating and characteristics of a novel biomacromolecules complex of pea protein isolated-tannic acid-magnesium ion

Pea protein isolate (PPI) was used as a carrier matrix to load tannic acid (TA) due to its multiple cavity structures and reaction sites, after that, magnesium ion (M) was further added to form more stable carrier structures. PPI was covalently bound with TA to form TA-PPI complexes in alkaline conditions, then M induced the aggregation of TA-PPI to produce M-TA-PPI complexes. TA mainly interacted with free amino groups and sulfhydryl groups of PPI, thereby decreasing their content in complexes. TA further decreased the α-helix content and increased the β-sheet and β-turn content in TA-PPI complexes correspondingly, nevertheless the M would decline these changes in M-TA-PPI complexes. As a result of binding, TA and M jointly increased the average molecular size of complexes. The higher TA addition amount (10-20 mg/g PPI) was conducive to the stronger intramolecular interactions (more hydrophobic interactions and disulfide bonds), gel structure (higher hardness value) and storage modulus in M-TA-PPI gels. Compared with TA-PPI complexes, M-TA-PPI complexes showed higher stability in gastric digestion and higher TA releasement and antioxidant capacity of its digesta in intestinal digestion. This kind of metal-phenolics-protein complexes may have potentials to be a stable and efficient carrier for loading gastric sensitive polyphenols.

Establishing a novel ternary complex of soybean protein isolated-tannic acid-magnesium ion and its properties

A ternary complex composed of soybean protein isolated (SPI), tannic acid (TA) and magnesium ion (M) was established to enhance the capability of protein carriers for TA delivery. SPI was firstly covalently bind with TA (TA-SPI) and then M was employed to form the ternary complex (M-TA-SPI). Their structures, gel and digestion properties were further investigated. TA was observed to covalently bind with SPI. TA-SPI and M-TA-SPI complexes showed different molecule size and spatial structures after binding with M and TA. The increasing of TA amount changed the intramolecular interactions, microstructure and texture properties of M-TA-SPI gels. Compared with TA-SPI, M retarded the gastric digestion of M-TA-SPI and caused higher TA release amount in intestinal tract. In this study, M-TA-SPI was determined to be a good carrier to protect and release TA in gastrointestinal digestion. This kind of complex may have potential applications for loading polyphenols in nutraceuticals.

Investigation into the fabrication of plant-based simulant connective tissue utilizing algae polysaccharide-derived hydrogel

Connective tissue is an important component of meat products that provides support to animal muscles. Hydrogels are considered a promising alternative to connective tissues and simulate actual products by adjusting the gel texture and mouthfeel. This study used soybean protein isolate (SPI), corn starch (CS), konjac glucomannan (KGM), and seaweed powder (SP) as raw materials to examine the effect of different added SP and KGM concentrations on the gel texture. The G' of the gel increased five-fold when the SP and KGM concentration was increased from 1 % to 3 %. The results of mechanical property tests showed that with the addition of SP, the gel hardness increased from 316.00 g to 1827.23 g and the tensile strength increased from 0.027 MPa to 0.089 MPa. Sensory evaluation showed that the samples with 2 % SP and KGM presented the highest overall acceptability score and the most significant similarity to real connective tissue. The connective tissue simulants exhibited excellent water-holding capacity (>90 %), significantly increasing their juiciness. SEM indicated that 2 % KGM addition improved gel network structure stability. The results demonstrate the potential of seaweed polysaccharide-derived hydrogels as connective tissue mimics. This provides a new strategy for the preparation of high mechanical strength hydrogels and lays the foundation for structural diversification of plant-based meat.

The Effect of Whey Protein Isolate Hydrolysate on Digestive Properties of Phytosterol

Phytosterol (PS) is a steroid, and its bioavailability can be enhanced by interacting with protein in the C-24 hydroxyl group. The interaction between sterols and amino acid residues in proteins can be enhanced by enzymatic hydrolysis. Phytosterol and whey insulation hydrolysates (WPH1-4) fabricated by the Alcalase enzyme at different enzymatic hydrolysis times were selected as delivery systems to simulate sterol C-24 hydroxyl group interaction with protein. Increasing hydrolysis time can promote the production of β-Lg, which raises the ratio of β-turn in the secondary structure and promotes the formation of interaction between WPH and PS. The correlation coefficient between hydrogen bonds and encapsulation efficiency (EE) and bioaccessibility is 0.91 and 0.88 (P < 0.05), respectively, indicating that hydrogen bonds of two components significantly influenced the combination by concealing the hydrophobic amino acids and some residues, which improved PS EE and bioavailability by 3.03 and 2.84 times after PS was combined with the WPI hydrolysate. These findings are expected to enhance the absorption of PS and other macromolecules by protein enzymatic hydrolysis to broaden their applications for food.

Salt ions improve soybean protein isolate/curdlan complex fat substitutes: Effect of molecular interactions on freeze-thaw stability

Although emulsion gels show significant potential as fat substitutes, they are vulnerable to degreasing, delamination, and other undesirable processes during freezing, storage, and thawing, leading to commercial value loss in terms of juiciness, flavor, and texture. This study investigated the gel strength and freeze-thaw stability of soybean protein isolate (SPI)/curdlan (CL) composite emulsion gels after adding sodium chloride (NaCl). Analysis revealed that adding low salt ion concentrations promoted the hardness and water-holding capacity (WHC) of fat substitutes, while high levels displayed an inhibitory effect. With 40 mM NaCl as the optimum concentration, the hardness increased from 259.33 g (0 mM) to 418.67 g, the WHC increased from 90.59 % to 93.18 %, exhibiting good freeze-thaw stability. Confocal laser scanning microscopy (CLSM) and particle size distribution were used to examine the impact of salt ion concentrations on protein particle aggregation and the damaging effect of freezing and thawing on the proteoglycan complex network structure. Fourier-transform infrared spectroscopy (FTIR) and protein solubility evaluation indicated that the composite gel network structure consisted of covalent contacts between the proteoglycan molecules and hydrogen bonds, playing a predominant role in non-covalent interaction. This study showed that the salt ion concentration in the emulsion gel affected its molecular interactions.

Characterization of feruloylated arabinoxylan - acorn starch double network gel composite film and its application in postharvest preservation of Agaricus bisporus

To obtain efficient natural food packaging materials, we utilized acorn starch (AS)-based film strengthened by feruloylated arabinoxylan (FAX) gel and additional retrogradation treatment to extend the shelf life of Agaricus bisporus (A. bisporus). Fourier transform infrared spectroscopy (FT-IR), confocal laser scanning microscopy (CLSM), and scanning electron microscopy (SEM) analyses showed that due to the strong hydrogen bonding between FAX and starch molecules, physical crosslinking occurred between FAX and starch molecules in the composite film, and the microstructure became more compact. Thermogravimetric, tensile strength and swelling degree analyses indicate that the composite film exhibits better thermal stability, mechanical properties, and waterproofing compared to the pure AS film. Consequently, after five days of storage, the moisture content of the A. bisporus packaged with our composite film was 7.53 times and 5.73 times higher than that of the control group and the commercially available PEF group, respectively. Moreover, it delayed the respiration or transpiration of A. bisporus (lower weight loss, relative conductivity, MDA content). This packaging film developed with the objective of eco-friendly and biodegradability has considerable application potential in food and other industries.

Effects of Extrusion Technology on Physicochemical Properties and Microstructure of Rice Starch Added with Soy Protein Isolate and Whey Protein Isolate

In order to improve the retrogradation of rice starch (RS) and the quality of rice products, soy protein isolate (SPI), whey protein isolate (WPI), and rice flour were mixed and further extruded into mixed flour. The physicochemical properties and morphology of starch of extruded rice flour (ERS) and starch of extruded mixtures of SPI, WPI, and rice flour (SPI-WPI-ERS) were analyzed. The distribution of amylopectin chain length, molecular weight, microstructure, crystallinity, short-range ordered structure, pasting properties, and thermodynamic properties of RS, ERS, and SPI-WPI-ERS were measured. The results showed that, compared with rice starch, the proportion of long-chain starch, total starch content, and molecular weight were decreased in ERS and SPI-WPI-ERS, but the proportion of short-chain and amylose content was increased. The short-range order structure was destroyed. The water absorption of ERS and SPI-WPI-ERS was much higher than rice starch at 55 °C, 65 °C, and 75 °C, but lower than that of rice starch at 95 °C. Therefore, the retrogradation characteristics of SPI-WPI-ERS were improved. The setback of rice starch products was reduced and the setback of SPI-WPI-ERS was lower than that of ERS. Overall, the retrogradation of rice starch was delayed by adding exogenous protein and extrusion technology, and the application range of rice flour in staple food products was broadened.

Assembly of soy protein-corn starch composite gels by thermal induction: Structure, and properties

The effect of different corn starch (CS) concentrations on the gel formation of soybean isolate protein (SPI) was investigated. Moreover, the texture, rheological properties of the gel were determined, and the spatial structure and interactions of the composite gel system were analyzed. The composite system transitioned from liquid to solid-like with an increase in the CS concentration and did not backflow when inverted for 24 h. With the addition of CS, the gel strength, water holding capacity (WHC), G', and G'' increased significantly. The maximum was reached at 10 % starch concentration with gel strength of (228.96 ± 29.86) g and WHC of (98.93 ± 2.02)  %. According to low-field 1H nuclear magnetic resonance (LF-NMR) results, CS has a high water absorption capacity, which improved the WHC. The scanning electron microscopy results revealed that composite gels with a high CS concentration had a more dense and small void network structure. According to the results of molecular force interaction, infrared spectroscopy, Raman spectroscopy, and free sulfhydryl group analysis, the added starch promoted the unfolding of SPI molecules, exposure of hydrophobic groups, transformation of free sulfhydryl groups into disulfide bonds, and hydrogen bond formation. Hydrophobic interactions, disulfide bonding, and hydrogen bonding function together to form the SPI-CS composite gel system. The study results provide the basis for applying soy protein and CS gels.

Effect and characterization of konjac glucomannan on xanthan gum/κ-carrageenan/agar system

A mixed polysaccharide system is an important strategy to improve the performance of a single polysaccharide. Herein, quaternary polysaccharide gels were prepared by konjac glucomannan (KGM), xanthan gum (XG), κ-carrageenan (κ-CA), and agar (AR). The effects of KGM were evaluated by combining water holding capacity (WHC), rheological analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and texture profile analysis (TPA). More KGM gradually increased the springiness of the compounded gels. WHC increased and then decreased with the addition of KGM, performing best at KGM4 (KGM: κ-CA:XG:AR = 2:2:1:2). Rheological analysis showed that the compounded gels exhibited a pseudoplastic characteristic of shear thinning, KGM endowed the gel with a stronger shear thinning behavior and improved the solid-like nature of the gels at high temperatures. The thermal stability of the composite gel was improved by the participation of KGM. FTIR analysis showed that the interactions were mainly related to intermolecular hydrogen bonds and acetyl groups. The microscopic morphology of KGM4 was significantly continuous, smooth, and compact, exhibiting the best practical performance and taking the maximum advantage.

Smilax china L.: A review of its botany, ethnopharmacology, phytochemistry, pharmacological activities, actual and potential applications

ETHNOPHARMACOLOGICAL RELEVANCE

Smilax china L., an extensively used traditional Chinese medicine, is known as Baqia in China. It has been used to treat various inflammatory disorders, particularly pelvic inflammation.

AIM OF THE REVIEW

The present paper aims to provide an up-to-date review at the advancements of the investigations on the ethnopharmacology, phytochemistry, pharmacological effect and actual and potential applications of S. china. Besides, the possible tendency and perspective for future research of this plant are discussed, as well.

MATERIALS AND METHODS

This article uses "Smilax china L." "S. china" as the keyword and collects relevant information on Smilax china L. plants through electronic searches (Elsevier, PubMed, ACS, CNKI, Google Scholar, Baidu Scholar, Web of Science), relevant books, and classic literature about Chinese herb.

RESULTS

134 chemical constituents, among which steroid saponins and flavonoids are the predominant groups, have been isolated and identified from S. china. S. china with its active compounds is possessed of wide-reaching biological activities, including anti-inflammatory, anti-cancer, anti-oxidant, detoxify nicotine, anti-diabetes, anti-obesity, anti-hyperuricaemia, anti-hypertension, promoting skin wound and barrier repair and anti-bacterial activity. Besides, S. china is also applied to other fields, such as food industry and detection technology.

CONCLUSIONS

Based on the review of the existing phytochemical studies on Smilax china L., the structural characterization of Smilax china L. extract can continue to be the focus of future research. Pharmacological studies in vitro and in vivo have demonstrated some of the traditional uses of Smilax china L. extract, while other traditional uses still need to be confirmed by research.

Effect and Mechanism of Soluble Starch on Bovine Serum Albumin Cold-Set Gel Induced by Microbial Transglutaminase: A Significantly Improved Carrier for Active Substances

Soluble starch (SS) could significantly accelerate the process of bovine serum albumin (BSA) cold-set gelation by glucono-δ-lactone (GDL) and microbial transglutaminase (MTGase) coupling inducers, and enhance the mechanical properties. Hardness, WHC, loss modulus (G″) and storage modulus (G') of the gel increased significantly, along with the addition of SS, and gelation time was also shortened from 41 min (SS free) to 9 min (containing 4.0% SS); the microstructure also became more and more dense. The results from FTIR, fluorescence quenching and circular dichroism (CD) suggested that SS could bind to BSA to form their composites, and the hydrogen bond was probably the dominant force. Moreover, the ability of SS to bind the original free water in BSA gel was relatively strong, thereby indirectly increasing the concentration of BSA and improving the texture properties of the gel. The acceleration of gelling could also be attributed to the fact that SS reduced the negative charge of BSA aggregates and further promoted the rapid formation of the gel. The embedding efficiency (EE) of quercetin in BSA-SS cold-set gel increased from 68.3% (SS free) to 87.45% (containing 4.0% SS), and a controlled-released effect was detected by simulated gastrointestinal digestion tests. The work could put forward new insights into protein gelation accelerated by polysaccharide, and provide a candidate for the structural design of new products in the food and pharmaceutical fields.

Comprehensive quality evaluation of plant-based cheese analogues

BACKGROUND

In recent years, there has been an increasing demand for plant-based cheese analogues, however, the protein content of plant-based cheeses currently on the market is generally low and cannot meet the nutritional needs of consumers.

RESULTS

Based on the ideal value similarity method (TOPSIS) analysis the best recipe for plant-based cheese was 15% tapioca starch, 20% soy protein isolate, 7% gelatine as a quality enhancer and 15% coconut oil. The protein content of this plant-based cheese was170.1 g kg-1 , which was close to commercial dairy-based cheese and significantly higher than commercial plant-based cheese, The fat content was 114.7 g kg-1 , lower than that of commercial dairy-based cheese. The rheology properties show that the viscoelasticity of the plant-based cheese is higher than that of dairy-based cheese and commercial plant-based. The microstructure results show that the type and content of protein has a significant impact on its microstructure. The Fourier-transform infrared (FTIR) spectrum of the microstructure shows a characteristic value at 1700 cm-1 , because the starch was heated and leached to form a complex with lauric acid under the action of hydrogen bond. It can be inferred that in the interaction between plant-based cheese raw materials, fatty acids serve as a bridge between starch and protein.

COUCLUSION

This study described the formula of plant-based cheese and the interaction mechanism between the ingredients, providing a basis for the development of subsequent plant-based cheese related products. © 2023 Society of Chemical Industry.

Legume protein/polysaccharide food hydrogels: Preparation methods, improvement strategies and applications

For the development of innovative foods and nutritional fortification, research into food gel is essential. As two types of rich natural gel material, both legume proteins and polysaccharides have high nutritional value and excellent application potential, attracting wide attention worldwide. Research has focused on combining legume proteins with polysaccharides to form hybrid hydrogels as their combinations show improved texture and water retention compared to single legume protein or single polysaccharide gels, and these properties can be tailored for specific applications. This article reviews hydrogels of common legume proteins and discusses heat induction, pH induction, salt ion induction, and enzyme-induced assembly of legume protein/polysaccharide mixtures. The applications of these hydrogels in fat replacement, satiety enhancement, and delivery of bioactive ingredients are discussed. Challenges for future work are also highlighted.

Mechanical Properties, Microstructure, and In Vitro Digestion of Transglutaminase-Crosslinked Whey Protein and Potato Protein Hydrolysate Composite Gels

The production of animal protein usually leads to higher carbon emissions than that of plant protein. To reduce carbon emissions, the partial replacement of animal protein with plant protein has attracted extensive attention; however, little is known about using plant protein hydrolysates as a substitute. The potential application of 2 h-alcalase hydrolyzed potato protein hydrolysate (PPH) to displace whey protein isolate (WPI) during gel formation was demonstrated in this study. The effect of the ratios (8/5, 9/4, 10/3, 11/2, 12/1, and 13/0) of WPI to PPH on the mechanical properties, microstructure, and digestibility of composite WPI/PPH gels was investigated. Increasing the WPI ratio could improve the storage modulus (G') and loss modulus (G″) of composite gels. The springiness of gels with the WPH/PPH ratio of 10/3 and 8/5 was 0.82 and 0.36 times higher than that of the control (WPH/PPH ratio of 13/0) (p < 0.05). In contrast, the hardness of the control samples was 1.82 and 2.38 times higher than that of gels with the WPH/PPH ratio of 10/3 and 8/5 (p < 0.05). According to the International Organization for Standardization of Dysphagia Diet (IDDSI) testing, the composite gels belonged to food level 4 in the IDDSI framework. This suggested that composite gels could be acceptable to people with swallowing difficulties. Confocal laser scanning microscopy and scanning electron microscopy images illustrated that composite gels with a higher ratio of PPH displayed thicker gel skeletons and porous networks in the matrix. The water-holding capacity and swelling ratio of gels with the WPH/PPH ratio of 8/5 decreased by 12.4% and 40.8% when compared with the control (p < 0.05). Analysis of the swelling rate with the power law model indicated that water diffusion in composite gels belonged to non-Fickian transport. The results of amino acid release suggested that PPH improved the digestion of composite gels during the intestinal stage. The free amino group content of gels with the WPH/PPH ratio of 8/5 increased by 29.5% compared with the control (p < 0.05). Our results suggested that replacing WPI with PPH at the ratio of 8/5 could be the optimal selection for composite gels. The findings indicated that PPH could be used as a substitute for whey protein to develop new products for different consumers. Composite gels could deliver nutrients such as vitamins and minerals to develop snack foods for elders and children.

Role of conformation transition of high acyl gellan in the design of double network hydrogels

Double network hydrogels (DNs) with excellent strength and toughness have been preliminarily applied in the preparation of artificial foods. To evaluate the effect of conformation transition of ductile polymers on the physicochemical properties of DNs, we firstly prepared agarose (AR)/high acyl gellan (HAG) DNs and investigated their mechanical properties, and then calcium ion (Ca²⁺) was introduced into optimized AR/HAG DNs to regulate the conformation of ductile chains (HAG) for further increasing their mechanical properties. The mechanical strength of the optimized AR/HAG gel is 5 times and 2 times that of AR and HAG gel, respectively. Compared with adding Ca²⁺ method, immersing Ca²⁺ solution endowed optimized DNs with 5-fold increase in mechanical strength, outstanding textural properties and lower swelling ratio, which was attributed to the extended conformation of ductile chains. Furthermore, the obtained DNs were reminiscent of beef omasum based on their physicochemical properties. Optimized AR/HAG DNs after immersing in 2 wt% CaCl₂ solution exhibited comparable texture properties with beef omasum by three correlation analysis methods and sensory evaluation, providing a new strategy to fabricate biomimetic food with high chewiness by regulating the conformation of ductile polymers in DNs.

Interactions of soy protein isolate with common and waxy corn starches and their effects on acid-induced cold gelation properties of complexes

Soy protein isolate (SPI) was mixed with different concentrations of common starch (CS) and waxy starch (WS) from corn. The interactions of SPI with CS or WS and their effects on the acid-induced cold gelation properties of complexes were investigated. Compared with WS, SPI could bind to CS more strongly and formed a tighter SPI-CS non-covalent complex, which resulted in the increased β-sheet and a more ordered secondary structure. The gel strength, water holding capacity (WHC), viscoelasticity, hydrophobic interactions and thermal stability of SPI-CS complex gels were enhanced as increasing CS concentration, and the complex with 2% of CS had the best gelation properties. Although adding WS reduced the gel strength, rheological properties and hydrophobic interactions of SPI-WS complex gels, it improved the WHC and thermal stability of the complex gels. Therefore, CS had a broader effect on improving acid-induced cold gelation properties of SPI than WS.

Textural characterization of calcium salts-induced mung bean starch-flaxseed protein composite gels as dysphagia food

Effects of calcium gluconate (CG), calcium lactate (CL) and calcium dihydrogen phosphate (CDP) on the structural and functional properties of mung bean starch (MBS)-flaxseed protein (FP) composite gels were investigated to explore the feasibility of developing dysphagia food. The water-immobilizing, rheological and structural properties of MBS-FP composite gels adding different calcium salts (10, 30, and 50 mmol/L) were analyzed by low-field nuclear magnetic resonance measurement, rheological and textural analyses, fourier transform infrared spectroscopy, scanning electron microscopy and confocal laser scanning microscopy. Results showed that calcium salts imparted various soft gel properties to the composite gels by influencing the interactions between MBS and FP. Calcium salts could affect the conformation of amylose chains, accelerate the aggregation of FP molecules, and increase the cross-linking between starch and protein aggregates, resulting in the formation of large aggregates and a weak gel network. Consequently, calcium salts-induced composite gels showed lower viscoelastic moduli and gel strength than the control gel. In particular, different calcium salts had various impacts on the gel properties due to their diverse ability forming hydrogen bonds. Compared with CL and CDP, the gels containing CG presented the higher viscoelastic moduli and hardness, and possessed an irregular cellular network with the increased pore number and the decreased wall thickness. The gel containing 50 mmol/L CL had the highest water-holding capacity, in all the gels tested, by retaining more immobilized and mobile water in the compact gel network with larger cavities. The gels adding CDP presented lower hardness and gumminess due to the obvious lamellar structure within the network. International dysphagia diet standardization initiative (IDDSI) tests indicated that the gels adding CG and CL could be categorized into level 6 (soft and bite-sized) dysphagia diet, while the samples adding CDP could be classified into level 5 (minced and moist). These findings provide insights for the development of the novel soft gel-type dysphagia food.

Walnut Protein Isolate-κ-Carrageenan Composite Gels Improved with Synergetic Ultrasound-Transglutaminase: Gelation Properties and Structure

Walnut protein is a kind of natural, high-quality plant protein resource. However, its high content of gluten, strong hydrophobicity and poor gelation ability have greatly limited its development and utilization in gel products. It was found in this experiment that ultrasonic power combined with transglutaminase (TGase) had a significant effect on the gel properties of the walnut protein isolate (WNPI)-κ-carrageenan (KC) complex. The results showed that the gel strength of the WNPI-KC complex first increased and then decreased with the increase in ultrasonic power (0-400 W). WNPI-KC composite gel had the best texture properties, rheological properties, water-holding capacity (99.41 ± 0.76%), swelling ratio (2.31 ± 0.29%) and thermal stability (83.22 °C) following 200 W ultrasonic pretreatment. At this time, the gel network was more uniform and much denser, and the water molecules were more tightly bound. Further, 200 W ultrasonic pretreatment could promote the transformation of α-helices to β-folds in protein molecules, improve the fluorescence intensity, increase the content of free sulfhydryl groups and enhance the intermolecular forces. The experimental results could provide technical support for the development of walnut protein gel food.

Structural, Thermal and Pasting Properties of Heat-Treated Lotus Seed Starch–Protein Mixtures

The interactions between starch and protein, the essential components of lotus seed, strongly influence the quality of lotus seed processing by-products. This study investigated the effects of lotus seed starch–protein (LS-LP) interactions on the structural, thermal and gelatinization properties of LS-LP mixtures, using LS/LP ratios of 6:1, 6:2, 6:3, 6:4, 6:5, or 1:1, after heat treatment (95 °C, 30 min). Fourier transform infrared peaks at 1540 cm⁻¹ and 3000–3600 cm⁻¹ revealed the major interactions (electrostatic and hydrogen bonding) between LS and LP. The UV–visible absorption intensities (200–240 nm) of LS-LP mixtures increased with increased protein content. X-ray diffraction and electron microscopy revealed that LS-LP consists of crystalline starch granules encapsulated by protein aggregates. Increasing the addition of protein to the mixtures restricted the swelling of the starch granules, based on their solubility, swelling properties and thermal properties. Viscometric analysis indicated that the formation of LS-LP mixtures improved structural and storage stability. These findings provide a practicable way to control the thermal and gelatinization properties of lotus seed starch–protein mixtures, by changing the proportions of the two components, and provide a theoretical basis for developing novel and functional lotus-seed-based foods.

Fabrication of agarose/fish gelatin double-network hydrogels with high strength and toughness for the development of artificial beef tendons

Agarose/fish gelatin (AR/FGA) double-network hydrogels (DNs) were fabricated via a one-step heating-cooling method. The structure, mechanical and textural properties, water-holding capacity, swelling behavior and sensory characteristics of the DNs were analyzed and compared with the corresponding single-network hydrogels (SNs) and beef tendons. An increase in FGA concentration (10-40 wt%) significantly enhanced the mechanical strength and toughness of DNs, while a moderate increase in AR concentration (0.5-1.5 wt%) only improved their mechanical strength. The 1.5 wt% AR/40 wt% FGA DNs attained excellent fracture stress and strain compared with the single AR and single FGA gels. This can be attributed to the energy dissipation effect, intermolecular hydrogen bond interactions and higher entanglement density of molecule chains. Furthermore, AR/FGA DNs attained a higher hardness, water holding capacity and lower swelling rate compared with SNs. The principal component analysis and correlation analysis showed that the 1.5 wt% AR/30 wt% FGA DNs displayed the most comparable correlation with beef tendons, which was consistent with the results of the sensory evaluation, showing great potential as artificial beef tendons. Our findings provide guidance for the modulation of gel properties and development of artificial foods.

Ions-regulated aggregation kinetics for egg white protein: A promising formulation with controlled gelation and rheological properties

This study aims to evaluate the structure of ions-regulated gelation of egg white protein (EWP) via aggregation kinetics model, which was built by monitoring turbidity. Results showed that compared with NaCl and KCl, the addition of Na2SO4 increased free sulfhydryl content, surface hydrophobicity and particle size of EWP significantly, while weakened the order of secondary structure. Hence, strengthened gel network structure was observed with higher porosity, which improved the texture profiles and rheological properties of EWP gels. Based on these phenomena above, the relationship between aggregation behavior and gelling properties with ions was further investigated by aggregation kinetics model and principal component analysis. Because of the enhancement of protein interactions, the aggregation growth rate with Na2SO4 was much faster than the samples with NaCl, which reflected over-aggregation due to the accelerated nucleation process and resulted in firmed gel network structure.

Physicochemical, structural and adhesion properties of walnut protein isolate-xanthan gum composite adhesives using walnut protein modified by ethanol

Low-sugar and high-protein adhesives have broad market application prospects, while natural plant proteins have confronted technical bottlenecks due to their poor adhesion. In this study, the effects of ethanol with different concentrations (0-80%) on the adhesion properties of walnut protein isolate-xanthan gum (WNPI-XG) composite adhesives were investigated. Results showed the bonding strength of WNPI-XG treated with 40% ethanol reached 12.55 MPa, the denaturation temperature and the surface hydrophobicity increased to 87.91 and 185.07 respectively, displaying the best rheological and texture properties. It also indicated appropriate concentration of ethanol (40%) didn't change the molecular weight of WNPI-XG, but greatly strengthened the fluorescence intensity, leading changes in contents of reactive sulfhydryl groups, electrostatic forces, hydrophobic interactions, hydrogen bonds and disulfide bonds. Furthermore, the treatment also facilitated a conformation conversion of the secondary structures from β-sheet to α-helix, promoting the full unfolding of protein molecules. The microstructure analysis showed after 40% ethanol treatment, the WNPI structure was uniform, the surface of WNPI-XG adhesive was flat and smooth, combined more closely with water molecules. By analyzing the influence of ethanol treatment on adhesion of WNPI-XG, the research laid a theoretical foundation for protein modification, providing good technical references for its development and utilization.

Acid/alkali shifting of Mesona chinensis polysaccharide-whey protein isolate gels: Characterization and formation mechanism

In this study, structural characteristics and formation mechanism of Mesona chinensis polysaccharide (MCP)-whey protein isolate (WPI) gels including group and molecular changes, intermolecular forces, crystallinity, and moisture migration were investigated under pH shifting conditions. Results showed that MCP and WPI formed a stable gel at pH 10. The free sulfhydryl groups and surface hydrophobicity of the MCP-WPI gels increased with the increasing pH. Hydrophobic and hydrogen bond interactions were the main molecular forces involved in the MCP-WPI gels, and electrostatic interactions and disulfide bonds played a complementary role. The pH conditions evidently influenced the secondary conformational structure of MCP-WPI gels. Molecular weight and X-ray diffraction (XRD) analysis indicated the formation of a hypocrystalline complex with molecular interaction. In addition, low-field magnetometry (LF-NMR) results showed that the T₂ values decreased with increasing pH, indicating that water and gel matrix had the highest interactions at pH 10.

Enzyme-catalyzed acylation improves gel properties of rapeseed protein isolate

BACKGROUND

Although rapeseed protein isolate (RPI) possessed some good functional properties, the use of RPI as an ingredient in the food industry is restricted mainly due to its inferior gelation. The purpose of this study was to improve the heat-induced gel properties of RPI using double processes of acylation and additional transglutaminase catalysis.

RESULTS

Scanning electron microscopy showed that the gel formed by native RPI exhibited randomly aggregated particulate network structures whereas transglutaminase (TG)-assisted RPI gels significantly improved gelation properties. More importantly, the combined modifications of RPI using TG-assisted acylation can form a gel with unique percolating and small porous structure. Furthermore, TG-catalyzed 5% acylated RPI gel (100 U g^-1 , protein basis) exhibited excellent gel properties in terms of gel strength, thermal stability, surface roughness and apparent viscosity compared to non-treated or single modification of RPI gel as determined by texture analyzer, atomic force microscopy and rheometer. Mechanistically, Fourier-transform infrared spectra and gel dissociation test revealed that TG-catalyzed acylation extensively unfolded the hydrophobic and sulfhydryl residues of RPI, in turn, reinforced re-assembly of protein molecules via hydrophobic interactions and disulfide bonds during gel formation.

CONCLUSION

Combined processes of acylation and additional TG catalysis improved the thermal gelation properties by altering inter- and intra-protein structures. Such sequential processes will provide a promising approach to improve the protein gelation that could be potentially applied in the food industry. © 2020 Society of Chemical Industry.