Cellulose/chitosan pH-responsive indicator incorporated with carrot anthocyanins for intelligent food packaging

Anthocyanin modified by chondroitin sulphate and tannic acid improved the quality-indicating properties of gelatin-based intelligent film

A highly pH-responsive gelatin film incorporating purple cabbage anthocyanin (PCA) and chondroitin sulphate (CS)/tannic acid (TA) was developed. Co-pigmentation of PCA via CS/TA improved its photothermal stability and visibility of color change in gelatin film. The morphological and structural properties of CS-PCA and TA-PCA films revealed that a more stable network was formed as new hydrogen bonds were generated by the co-pigmentation. Meanwhile, the co-pigmentation improved film's mechanical and hydrophobic properties, expressed as higher tensile strength (16.65 and 17.97 Mpa) and lower water vapor permeability (1.45 and 1.41) in CS-PCA and TA-PCA films, compared to PCA film. CS-PCA and TA-PCA films showed distinct color transitions for chilled fish fillets during storage. Total color difference (ΔE) of CS-PCA and TA-PCA films correlated well with the deterioration indexes of total volatile base nitrogen (TVB-N). All the results provided a novel pH-sensitive intelligent packaging strategy by co-pigmenting CS/TA with PCA for freshness monitoring.

Fast and sustainable production of smart nanofiber mats by solution blow spinning for food quality monitoring: Potential of polycaprolactone and agri-food residue-derived anthocyanins

The shelf life of perishable foods is estimated through expensive and imprecise analyses that do not account for improper storage. Smart packaging, obtained by agile manufacturing of nanofibers functionalized with natural pigments from agri-food residues, presents promising potential for real-time food quality monitoring. This study employed the solution blow spinning (SBS) technique for the rapid production of smart nanofiber mats based on polycaprolactone (PCL), incorporating extracts of agricultural residues rich in anthocyanins from eggplant (EE) or purple cabbage (CE) for monitoring food quality. The addition of EE or CE to the PCL matrix increased the viscosity of the solution and the diameter of the nanofibers from 156 nm to 261-370 nm. The addition of extracts also improved the mechanical and water-related properties of the nanofibers, although it reduced the thermal stability. Attenuated total reflectance Fourier-transform infrared spectroscopy confirmed the incorporation of anthocyanins into PCL nanofibers. Nanofiber mats incorporated with EE or CE exhibited visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10), and ammonia vapor. Smart nanofibers have demonstrated the ability to monitor fish fillet spoilage through visible color changes (ΔE ≥ 3) during storage. Consequently, smart nanofibers produced by the SBS technique, using PCL and anthocyanins from agro-industrial waste, reveal potential as smart packaging materials for food.

Intelligent Packaging Systems with Anthocyanin: Influence of Different Polymers and Storage Conditions

With the aim of meeting the growing demand for safe food, intelligent packaging has emerged, which monitors the conditions of the food and informs the consumer about its quality directly at the time of purchase. Among intelligent packaging options, colorimetric indicator films, which change color in response to changes in the food, such as the release of volatile compounds, have been widely studied. Among them, pH indicator films composed of dyes sensitive to small variations in the pH value of the food surface have received greater attention in recent years. Anthocyanins, which are natural pigments, have stood out as one of the most commonly used sources of dyes in the production of these indicator films. In this context, the present review aims to present an updated overview of research employing anthocyanins in indicator films, including their stability under different storage conditions, the influence of different polymers used in their production, and alternative techniques for maintaining stability.

Eco-friendly methylcellulose/zinc alginate film with multi-function properties: thermal stability, flame retardancy and antibacterial activities

The purpose of this study was to synthesize crosslinked films from methylcellulose (MC) and sodium alginate (SA) using a straightforward ion exchange technique in a ZnCl2 coagulation bath. The resulting MC/ZA blend films exhibited significant improvements in thermal stability, with a measured increase of 191 °C in degradation temperature compared to MC film. The introduction of zinc ion (Zn2+) enhanced the flame retardancy of MC/ZA film, achieving a 92.4 % reduction in flammability. The microstructure of the MC/ZA blend film displayed a relatively smooth surface, indicating better biocompatibility between MC and ZA. Additionally, the barrier property of the MC/ZA film was improved, with a 35 % reduction in permeability to water vapor, and the mechanical properties were strengthened, showing a slightly reduction of 5 % in tensile strength. Furthermore, the MC/ZA blend film demonstrated enhanced antibacterial effectiveness, with a 99.99 % of S. aureus and E. coli, implying their suitability for packaging applications involving high oil content foods.

Chitosan/polyvinyl alcohol food packaging incorporated with purple potato anthocyanins and nano-ZnO: Application on the preservation of hairtail (Trichiurus haumela) during chilled storage

The objective of this work was to evaluate the potential application of chitosan/PVA food packaging films incorporating nano-ZnO and purple potato anthocyanins for preserving chilled hairtail pieces. The hairtail pieces were packaged with chitosan/PVA (CP) and chitosan/PVA/nano-ZnO/purple potato anthocyanins (CPZP), respectively, and Control named without any packaging. The changes in pH, total volatile basic nitrogen (TVB-N), total bacterial colony (TVC), thiobarbituric acid (TBA), color value, and sensory evaluation scores of hairtail pieces were periodically determined. Notably, pH, TVC, TVB-N and TBA values of CPZP group on day 15 were 11.67 %, 23.71 %, 80.73 %, and 35.07 %, respectively, lower than Control group. In addition, CPZP group also performed the best in color and sensory evaluation. These results indicated that CPZP, an active food packaging, could extend the shelf-life of hairtail at least 6 days. Overall, chitosan/PVA food films incorporated with nano-ZnO and purple potato anthocyanins (180 mg/100 mL) provides a potential application in food preservation.

Development and investigation of a polysaccharide ternary nanocomposite based on basil seed gum/graphene oxide/anthocyanin for intelligent food packaging

A new pH-sensitive intelligent packaging system was developed composed of extracted and purified basil seed gum (BG) containing aqueous malva sylvestris extract (MS) and varying amounts of synthesized graphene oxide (GO). In the following, the characteristics of prepared films including spectroscopic, physio-mechanical, thermogravimetry, fracture-surface morphology, anthocyanin release, and pH and TVB-N sensitivity, were investigated. Our results revealed that the addition of 0.5 wt % MS into the BG matrix induced pH sensitivity to the film and resulted in a visible color change from pH 2.0 to 14.0; however, it reduced the thermal and physio-mechanical properties. In this regard, the effective presence of the optimum concentration of GO (0.25 wt%) in enhancing the mechanical and thermal properties of the BG-MS films was shown. Moreover, inspecting the release kinetics demonstrated a controllable release for BG-MS-GO film compared to the BG-MS film in 48 h. Furthermore, the total volatile basic nitrogen (TVB-N) content and pH value were shown to be highly correlated with the color changes of the freshness indicator film during the storage of salmon fillets at 25 °C for 36 h. Therefore, it was shown that BG-MS-GO film can be used as a highly effective freshness/spoilage indicator of proteinic products.

The Biosynthesis of Bacterial Cellulose Composites Accompanied by Spray Feeding of Biomasses

Bacterial cellulose (BC) is a broadly utilized natural nanofiber produced by microbial fermentation, but its high-cost and low-yield production and limited function still hinder its application. Here, we used the spraying-assisted biosynthesis method to introduce biomass nanofibers along with the nutrient media to the fermenting BC. Biomass nanofibers could be cellulose, chitosan, and others. They entangled with BC nanofibers via intermolecular interactions, including hydrogen binding and electrostatic adsorption, to form uniform BC composites. The BC composites achieved an enhanced yield of ~140 wt% compared with pure BC and displayed similar excellent mechanical properties (Young's moduli = 0.9-1.4 MPa for wet films and =~6500 MPa for dried films). BC composites also had similar high crystallinity and thermal stability to pure BC. The functional groups of biomasses endowed BC composite additional functions such as antibacterial and dye-adsorption capabilities. Moreover, a high yield and functionalization could be realized simultaneously by feeding functional cellulose nanofibers. This method provides a facile way to produce BC composites with low cost, high yield, and multiple functions.

Preparation and characterization of intelligent and active bi-layer film based on carrageenan/pectin for monitoring freshness of salmon

This work aimed to develop and characterize a novel bi-layer film (BIF) for monitoring the freshness of salmon. The indicator layer consists of carrageenan (Car), pectin (PEC) and purple sweet potato anthocyanin (PSPA), and the antibacterial layer consists of Car and magnolol (Mag). The results showed that the Car/Mag2 had the optimal water resistance: the static water contact angle of 80.36 ± 0.92 °, moisture content of 31.38 ± 0.86 %, swelling degree of 92.96 ± 0.46 %, and water solubility of 40.08 ± 1.17 %, and showed excellent antibacterial properties against E. coli and S. aureus with antibacterial rate of 86.13 % ± 0.10 % and 97.53 % ± 0.02 %, respectively. Then BIFs with different PSPA concentration were tested. The morphology, mechanical and water vapor properties (WVP) of the BIFs were studied, and its application in salmon preservation was evaluated. The mechanical properties and WVP test results showed that the BIF0.2 had the optimal Tensile strength (TS) and WVP values. The BIFs showed distinguishable color changes between the pH ranges of 3-10. The shelf life of salmon packaged by BIF0.2 was prolonged by 2 days. Moreover, the BIF0.2 was able to effectively monitor salmon freshness. In conclusion, the BIF has great potential for monitoring salmon meat freshness.

Edible colorimetric label based on immobilized purple sweet potato anthocyanins onto edible film for packaged mushrooms freshness monitoring

An edible colorimetric label has been developed to determine the freshness level of mushrooms, i.e. white oyster mushrooms (Pleurotus ostreatus). The edible indicator label has been fabricated based on purple sweet potato (Ipomoea batatas L.) anthocyanins (PSPA) immobilized onto an edible film made of chitosan and cornstarch with added PVA. The freshness parameters of the mushrooms were pH, weight loss, texture, and sensory evaluation. The results showed that the colorimetric label was dark purple when the mushroom was fresh, and turn to light purple when the mushroom was still fresh, and finally green when the mushroom was no longer fresh. The color value (mean Red) of the label was measured using the ImageJ program, where its color value (mean Red) increased with decreasing freshness level of the mushrooms. The edible label can distinguish fresh mushrooms from spoilage, making it suitable to be used in a packaged mushroom as a freshness indicator.

Biopolymer-based intelligent packaging integrated with natural colourimetric sensors for food safety and sustainability

Increasing concerns about global food safety and security demands innovative solutions, particularly in food packaging technologies. This review paper investigates the advanced integration of natural colourimetric sensors with biopolymer-based packaging materials, with a focus on developments over the past 5 years. These sensors change colour in response to environmental stimuli such as oxygen, temperature, pH and relative humidity, intuitively indicating food freshness and safety. The paper emphasizes the recent advancements in using natural colourants, such as alizarin, anthocyanins, betacyanins, chlorophyll, curcumin and shikonin. When combined with either natural or synthetic biopolymers, these colourants contribute to a sustainable and eco-friendly approach to food packaging. Such technological advances could notably decrease the incidence of foodborne illnesses by signaling potential spoilage or contamination, while also addressing food wastage by providing clear indications of edibility. Although challenges remain in sensor longevity and widespread adoption, the prospects for biopolymer-based food packaging with embedded natural colourimetric sensors are promising.

Stretchable, antifatigue, and intelligent nanocellulose hydrogel colorimetric film for real-time visual detection of beef freshness

The use of biopolymers as matrices and anthocyanins as pH-sensing indicators has generated increasing interest in freshness detection. Nevertheless, the weak mechanical properties and color stability of biopolymer-based smart packaging systems restrict their practicality. In this study, a nanocellulose hydrogel colorimetric film with enhanced stretchability, antifatigue properties, and color stability was prepared using soy hull nanocellulose (SHNC), polyvinyl alcohol (PVA), sodium alginate (SA), and anthocyanin (Anth) as raw materials. This hydrogel colorimetric film was used to detect beef freshness. The structure and properties (e.g., mechanical, thermal stability and hydrophobicity) of these hydrogel colorimetric films were characterized using different techniques. Fourier-transform infrared spectroscopy revealed the presence of hydrogen and ester bonds in the hydrogel colorimetric films, whereas scanning electron microscopy revealed the fish scale-like and honeycomb network structure of the hydrogel colorimetric films. Mechanical testing demonstrated that the SHNC/PVA/SA/Anth-2 hydrogel colorimetric film exhibited excellent tensile properties (elongation = 261 %), viscoelasticity (storage modulus of 11.25 kPa), and mechanical strength (tensile strength = 154 kPa), and the hydrogel colorimetric film exhibited excellent mechanical properties after repeated tensile tests. Moreover, the hydrogel colorimetric film had high transparency, excellent anti-UV linearity, thermal stability and hydrophobicity, and had displayed visually discernible color response to pH buffer solution and volatile NH3 by naked eyes, which was highly correlated with the TVB-N and pH values. Notably, the release of anthocyanin in distilled water decreased from 81.23 % to 19.87 %. The designed SHNC/PVA/SA/Anth hydrogel colorimetric films exhibited potential application as smart packaging film or gas-sensing labels in monitoring the freshness of meat products.

An Anthocyanin-Based Eco-Friendly Triboelectric Nanogenerator for pH Monitoring and Energy Harvesting

In recent years, renewable and sustainable triboelectric nanogenerators have attracted attention due to their high energy conversion rate, and enhancing their functionality further contributes to their applicability across various fields. A pH-sensitive triboelectric nanogenerator (pH-TENG) has been prepared by electrostatic spinning technology, with anthocyanin as the pH indicator and environmentally friendly polyvinyl alcohol (PVA) as the substrate. Among many friction-negative materials, the pH-TENG exhibits the best combination with fluorinated ethylene propylene (FEP) and yields an open-circuit voltage of 62 V, a short-circuit current of 370 nA, and a transferred charge of 21.8 nC. At a frequency of 3 Hz, it can charge a 4.7 μF capacitor to 2 V within 45 s, effectively powering a thermometer. Furthermore, the presence of anthocyanin does not affect the pH-TENG's power generation performance and enables the monitoring of a wide range of environmental pH changes, with an ΔE change of 28.8 ± 7.6. Therefore, pH-TENG prepared with environmentally friendly materials can bring new available materials to the biological and medical fields.

Active cellulose acetate/purple sweet potato anthocyanins@cyclodextrin metal-organic framework/eugenol colorimetric film for pork preservation

As a natural pH-sensing colorant, purple sweet potato anthocyanins (PSPAs) have demonstrated great potential in colorimetric film for freshness monitoring. However, the photothermal instability of PSPAs is still a challengeable issue. Herein, γ-cyclodextrin metal-organic framework (CD-MOF) loaded with PSPAs (PSPAs@CD-MOF, i.e., PM) and eugenol (EUG) were incorporated in cellulose acetate (CA) matrix for developing a smart active colorimetric film of CA/PM/EUG, where PM and EUG were hydrogen-bonded with CA. Attentions were focused on the photothermal colorimetric stability, colorimetric response, and antibacterial activity of the films. The presence of PM and EUG endowed the film outstanding UV-blocking performance and enhanced the barrier against water vapor and oxygen. Target film of CA/PM15/EUG10 had good photothermal colorimetric stability due to the protection of CD-MOF on PSPAs and the color changes with pH-stimuli were sensitive and reversible. In addition to antioxidant activity, CA/PM15/EUG10 had antibacterial activity against Escherichia coli and Staphylococcus aureus. The application trial results indicated that the CA/PM15/EUG10 was valid to indicate pork freshness and extended the shelf-life by 100 % at 25 °C, which has demonstrated a good perspective on smart active packaging for freshness monitoring and shelf-life extension.

Development of smart packaging film incorporated with sodium alginate-chitosan quaternary ammonium salt nanocomplexes encapsulating anthocyanins for monitoring milk freshness

This study focused on the preparation, functionality, and application of smart food packaging films based on polyvinyl alcohol (PVA) and anthocyanins (ACNs) -loaded sodium alginate-chitosan quaternary ammonium salt (HACC-SA) nanocomplexes. The average encapsulation rate of anthocyanins-loaded nanocomplexes reached 62.51 %, which improved the hydrophobicity and water vapor barrier of the PVA film. FTIR confirmed that the nanocomplexes were immobilized in the PVA film matrix by hydrogen bonding, which improved the mechanical properties of the film. The SEM and XRD results demonstrated that the HACC-SA-ACNs nanocomplexes were uniformly distributed in the film matrix and the crystallinity of PVA was decreased. The P/HACC-SA-ACNs film showed a significant response to buffers of pH 2-13 and high color stability after 21 days of storage compared to the P/ACNs film. Furthermore, the color of the composite film changed from purple to red as the milk freshness decreased during 72 h of milk freshness monitoring, indicating that the P/HACC-SA-ACNs films were suitable and promising for application as smart packaging materials.

Development and evaluation of Bauhinia Kockiana extract-incorporated sago starch intelligent film strips for real-time freshness monitoring of coconut milk

The aim of this work was to fabricate an intelligent film using sago starch incorporated with the natural source of anthocyanins from the Bauhinia Kockiana flower and use it to monitor the freshness of coconut milk. The films were developed using the casting method that included the addition of the different concentrations (0, 5, 10, 15 mg) of Bauhinia Kockiana extract (BKE) obtained using a solvent. The anthocyanin content of Bauhinia Kockiana was 262.17 ± 9.28 mg/100 g of fresh flowers. The spectral characteristics of BKE solutions, cross-section morphology, physiochemical, barrier, and mechanical properties, and the colour variations of films in different pH buffers were investigated. Films having the highest BKE concentration demonstrated the roughest structure and highest thickness (0.16 mm), moisture content (9.72 %), swelling index (435.83 %), water solubility (31.20 %), and elongation at break (262.32 %) compared to the other films. While monitoring the freshness of coconut milk for 16 h, BKE15 showed remarkable visible colour changes (from beige to dark brown), and the pH of coconut milk dropped from 6.21 to 4.56. Therefore, sago starch film incorporated with BKE has excellent potential to act as an intelligent pH film in monitoring the freshness of coconut milk.

Anthocyanin-Loaded Polymers as Promising Nature-Based, Responsive, and Bioactive Materials

Anthocyanins are a specific group of molecules found in nature that have recently received increasing attention due to their interesting biological and colorimetric properties that have been successfully applied in several fields such as food preservation and biomedicine. Consequently, reviews devoted to a general overview of these flavonoids have proliferated in recent years. Meanwhile, the incorporation of anthocyanins into polymeric systems has become an interesting strategy to widen the applicability of these molecules and develop new smart and functional polymers in the above cited areas. However, anthocyanin-based polymers have been scarcely reviewed in the literature. Accordingly, this review aims to be a systematic summary of the most recent approaches for the incorporation of anthocyanins into macro-, micro-, or nanostructured polymers. Moreover, this work describes the fundamentals of the applicability of smart anthocyanin-based polymers and offers an updated review of their most interesting applications as sensors, biological regulators, and active materials.

Material Breakthroughs in Smart Food Monitoring: Intelligent Packaging and On-Site Testing Technologies for Spoilage and Contamination Detection

Despite extensive commercial and regulatory interventions, food spoilage and contamination continue to impose massive ramifications on human health and the global economy. Recognizing that such issues will be significantly eliminated by the accurate and timely monitoring of food quality markers, smart food sensors have garnered significant interest as platforms for both real-time, in-package food monitoring and on-site commercial testing. In both cases, the sensitivity, stability, and efficiency of the developed sensors are largely informed by underlying material design, driving focus toward the creation of advanced materials optimized for such applications. Herein, a comprehensive review of emerging intelligent materials and sensors developed in this space is provided, through the lens of three key food quality markers - biogenic amines, pH, and pathogenic microbes. Each sensing platform is presented with targeted consideration toward the contributions of the underlying metallic or polymeric substrate to the sensing mechanism and detection performance. Further, the real-world applicability of presented works is considered with respect to their capabilities, regulatory adherence, and commercial potential. Finally, a situational assessment of the current state of intelligent food monitoring technologies is provided, discussing material-centric strategies to address their existing limitations, regulatory concerns, and commercial considerations.

Recent advances in biomacromolecule-based nanocomposite films for intelligent food packaging- A review

In food packaging, biopolymer films are biodegradable films made from biomacromolecule-based natural materials, while biocomposite films are hybrids of two or more materials, with at least one being biodegradable. Bionanocomposites are different than the earlier ones, as they consist of various nanofillers (both natural and inorganic) in combination with biomacromolecule-based biodegradable materials to make good compostable bionanocomposites. In this regard, a new type of material known as bionanocomposite has been recently introduced to improve the properties and performance of biocomposite films. Bionanocomposites are primarily developed for active packaging, but their use in intelligent packaging is also noteworthy. For example, bionanocomposites developed using a hybrid of anthocyanin and carbon dots as intelligent materials have shown their high pH-sensing properties. The natural nanofillers (like nanocellulose, nanochitosan, nanoliposome, cellulose nanocrystals, cellulose nanofibers, etc.) are being employed to promote the sustainability, degradability and safety of bionanocomposites. Overall, this article comprehensively reviews the latest innovations in bionanocomposite films for intelligent food packaging over the past five years. In addition to packaging aspects, the role of nanofillers, the importance of life cycle assessment (LCA) and risk assessment, associated challenges, and future perspectives of bionanocomposite intelligent films are also discussed.

Recent Studies and Applications of Hydrogel-Based Biosensors in Food Safety

Food safety has increasingly become a human health issue that concerns all countries in the world. Some substances in food that can pose a significant threat to human health include, but are not limited to, pesticides, biotoxins, antibiotics, pathogenic bacteria, food quality indicators, heavy metals, and illegal additives. The traditional methods of food contaminant detection have practical limitations or analytical defects, restricting their on-site application. Hydrogels with the merits of a large surface area, highly porous structure, good shape-adaptability, excellent biocompatibility, and mechanical stability have been widely studied in the field of food safety sensing. The classification, response mechanism, and recent application of hydrogel-based biosensors in food safety are reviewed in this paper. Furthermore, the challenges and future trends of hydrogel biosensors are also discussed.

Development of alginate-based film incorporated with anthocyanins of red cabbage and zinc oxide nanoparticles as freshness indicator for prawns

The objective of this study was to develop pH-sensitive film indicators for intelligent food packaging by incorporating red cabbage anthocyanins (RCA) and zinc oxide nanoparticles (ZnO NPs) into an alginate (Alg) film, aiming to mitigate the risk of foodborne illnesses. The films were fabricated using a solvent-casting method and crosslinked with a calcium chloride (CaCl2) solution. Thorough evaluations of the films' physical, mechanical, and structural properties demonstrated significant improvements in elastic modulus and UV/vis light barrier characteristics, reduced water vapor permeability (WVP), and moisture content attributed to integrating RCA and ZnO NPs. The resulting film displayed discernible color changes when exposed to various pH buffer solutions and ammonia vapor, indicating heightened sensitivity to pH fluctuations due to the presence of ZnO NPs. Visual assessment using prawns as test specimens revealed a color shift from violet (indicating satisfactory condition) to blue-greenish (indicating spoilage), corroborated by colorimetric analysis. Moreover, the Alg/ZnO/RCA film exhibited antioxidant and antibacterial properties, demonstrated biodegradation activity, and showed no toxic effects on RSC96 cells, further underscoring its potential as an effective freshness indicator for food products.

Chitosan Film Sensor for Ammonia Detection in Microdiffusion Analytical Devices

Chitosan films have attracted increased attention in the field of sensors because of chitosan's unique chemico-physical properties, including high adsorption capacity, filmability and transparency. A chitosan film sensor was developed through the dispersion of an ammonia specific reagent (Nessler's reagent) into a chitosan film matrix. The chitosan film sensor was characterized to assess the film's properties by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). A gas diffusion device was prepared with the chitosan film sensor, enabling the collection and detection of ammonia vapor from biological samples. The chitosan film sensor color change was correlated with the ammonia concentration in samples of human serum and artificial urine. This method enabled facile ammonia detection and concentration measurement, making the sensor useful not only in clinical laboratories, but also for point-of-care devices and wherever there is limited access to modern laboratory facilities.

Colorimetric pH indicators based on well-defined amylose and amylopectin matrices enriched with anthocyanins from red cabbage

This study aimed to prepare a novel colorimetric indicator film from virtually pure (99 %) amylose (AM) and anthocyanins extracted from red cabbage (RCA). The AM used was a unique engineered bulk material extracted from transgenic barley grains. Films produced by solution casting were compared to normal barely starch (NB) and pure barley amylopectin (AP), with amylose contents of 30 % and 0 %, respectively. The pH-indicator films were produced by incorporation of RCA into the different starch support matrices with different amylose contents. Barrier, thermal, and mechanical properties, photo degradation stability, and release behavior data revealed that RCA interact differently through the glucan matrices. Microstructural observations showed that RCA were evenly dispersed in the glucan matrix, and AM+RCA indicator films showed high UV-barrier and mechanical performance over normal starch. FTIR revealed that RCA was properly affected by the AM matrix. Moreover, the AM+RCA films showed sensitive color changes in the pH range (2-11) and a predominant Fickian diffusion release mechanism for RCA. This study provides for the first time data regarding AM films with RCA and their promising potential for application as support matrices in responsive food and other industrial biodegradable packaging materials.

Fabrication, performance, and potential environmental impacts of polysaccharide-based food packaging materials incorporated with phytochemicals: A review

Although food packaging preserves food's quality, it unfortunately contributes to global climate change since the considerable carbon emissions associated with its entire life cycle. Polysaccharide-based packaging materials (PPMs) are promising options to preserve foods, potentially helping the food industry reduce its carbon footprint. PPMs incorporated with phytochemicals hold promise to address this critical issue, keep food fresh and prolong the shelf life. However, phytochemicals' health benefits are impacted by their distinct chemical structures thus the phytochemicals-incorporated PPMs generally exhibit differential performances. PPMs must be thoughtfully formulated to possess adequate physicochemical properties to meet commercial standards. Given this, this review first-time provides a comprehensive review of recent advances in the fabrication of phytochemicals incorporated PPMs. The application performances of phytochemicals-incorporated PPMs for preserving foods, as well as the intelligent monitoring of food quality, are thoroughly introduced. The possible associated environmental impacts and scalability challenges for the commercial application of these PPMs are also methodically assessed. This review seeks to provide comprehensive insights into exploring new avenues to achieve a greener and safer food industry via innovative food packaging materials. This is paramount to preserve not only food shelf life but also the environment, facilitating the eco-friendly development of the food industry.

Ammonia-sensitive cellulose acetate-based films incorporated with Co-BIT microcrystals for smart packaging application

Nowadays, there is an increasing demand for smart packaging materials capable of effectively monitoring the food freshness. In this study, new Co-based MOF (Co-BIT) microcrystals with ammonia-sensitivity and antibacterial function were constructed and then loaded within cellulose acetate (CA) matrix to create smart active packaging materials. The influences of Co-BIT loading upon structure, physical, and functional properties of the CA films were then thoroughly explored. It was observed that microcrystalline Co-BIT was uniformly integrated inside CA matrix, which caused significant promotions in mechanical strength (from 24.12 to 39.76 MPa), water barrier (from 9.32 × 10^-6 to 2.73 × 10^-6 g/m·h·Pa) and ultraviolet light protection performances of CA film. Additionally, the created CA/Co-BIT films displayed striking antibacterial efficacy (>95.0 % for both Escherichia coli and Staphylococcus aureus), favorable ammonia-sensitivity function as well as color stability. Finally, the CA/Co-BIT films were successfully applied for indicating the spoilage of shrimp through discernible color changes. These findings suggest that Co-BIT loaded CA composite films have great potential for use as smart active packaging.

Exopolysaccharide riclin and anthocyanin-based composite colorimetric indicator film for food freshness monitoring

Food freshness monitoring is vital to ensure food safety. Recently, packaging materials incorporating pH-sensitive films have been employed to monitor the freshness of food products in real time. The film-forming matrix of the pH-sensitive film is essential to maintain the desired physicochemical functions of the packaging. Conventional film-forming matrices, such as polyvinyl alcohol (PVA), have drawbacks of low water resistance, poor mechanical properties, and weak antioxidant ability. In this study, we successfully synthesise PVA/riclin (P/R) biodegradable polymer films to overcome these limitations. The films feature riclin, an agrobacterium-derived exopolysaccharide. The uniformly dispersed riclin conferred outstanding antioxidant activity to the PVA film and significantly improved its tensile strength and barrier properties by forming hydrogen bonds. Purple sweet potato anthocyanin (PSPA) was used as a pH indicator. The intelligent film with added PSPA provided robust surveillance of volatile ammonia and changed its color within 30 s in the pH range of 2-12. This multifunctional colorimetric film also engendered discernible color changes when the quality of shrimp deteriorated, demonstrating its great potential as an intelligent packaging material to monitor food freshness.

Novel “all-in-one” multifunctional gelatin-based film for beef freshness maintaining and monitoring

In this study, a novel multifunctional food packaging was developed by incorporating alizarin (AL) and oregano essential oil Pickering emulsion (OEOP) into a gelatin film matrix. The incorporation of OEOP and alizarin improved the UV-vis resistance property of the film, blocking almost all UV-vis light (decreasing 71.80% to 0.06% at 400 nm). The elongation-at-break (EBA) was 4.02 times of that of gelatin film, indicating the improved mechanical properties of the films. This film showed a significant color change from yellow to purple in the pH range of 3-11 and a considerable sensitivity to ammonia vapor within 4 min, which was attributed to the deprotonation of the alizarin molecule. The film's antioxidant and dynamic antimicrobial capacity was significantly improved owing to the sustained release effect of OEOP. Furthermore, the multifunctional film effectively slowed down the beef spoilage rate and provided real-time visual monitoring of freshness through color changes. Additionally, the color change of the beef quality was linked to the RGB values of the film through a smartphone APP. Overall, this work broadens the possibilities of applications in the food packaging industry for multifunctional food packaging film with preservation and monitoring functions.

Chitosan-Based Composites: Development and Perspective in Food Preservation and Biomedical Applications

Chitin, which may be the second-most common polymer after cellulose, is the raw material of chitosan. Chitosan has been infused with various plant extracts and subsidiary polymers to improve its biological and physiological properties. Chitosan's physicochemical properties are enhanced by blending, making them potential candidates that can be utilized in multifunctional areas, including food processing, nutraceuticals, food quality monitoring, food packaging, and storage. Chitosan-based biomaterials are biocompatible, biodegradable, low toxic, mucoadhesive, and regulate chemical release. Therefore, they are used in the biomedical field. The present manuscript highlights the application of chitosan-based composites in the food and biomedical industries.

Development of a pH-sensing indicator for shrimp freshness monitoring: Curcumin and anthocyanin-loaded gelatin films

An intelligent pH-sensing indicator containing Roselle (Hibiseus sabdariffa L.) (RS) anthocyanin and curcumin (CR) was developed and characterized as on-package indicator tags to check the freshness of shrimp during the storage at 4°C. FE-SEM and FT-IR analysis showed that RS and CR were successfully immobilized in the gelatin-glycerol film-forming substrate. The addition of various natural dyes increased the thickness and antioxidant action of the colorimetric film. To assess the response to changes in the pH, the colorimetric film was immersed in different buffers. Based on volatile amines secreted by shrimp, a test application of a colorimetric film containing natural dyes at a ratio of CR:RS = 1:4 (v/v) was conducted in shrimp at 4°C. The total volatile basic nitrogen (TVB-N) and the pH of shrimp were monitored during refrigerated storage for 10 days, and the color changes of the indicator were recorded simultaneously. The results indicated that the designed colorimetric film could produce various colors, which are thought to be indicative of the freshness and spoilage of packaged shrimp. Therefore, the target film can be utilized as a promising smart packaging material for monitoring the freshness of shrimp and aquatic products in real time.

Capillary-Assisted Monitoring of Milk Freshness via a Porous Cellulose-Based Label with High pH Sensitivity

A cellulose-based matrix for monitoring milk freshness (MF) was produced from rice straw particles (RSPs) in a 0.125-0.150 mm that was bis-quaternized to attach bromocresol purple (BP) as a sensor. Under alkali conditions, the obstinate structure of the rice straw had opened, thereby improving the accessibility of the cellulose. Bis-quaternization created more adsorption sites for BP. The maximum adsorption capacity was 97.68 mg/g. The sensors were interwoven with cellulosic fibers to form the cellulose-based label with a relatively loose three-dimensional structure via hydrogen bonds. As the proportion of BP-BCRPs was increased from 10% to 40%, the air permeability of the label increased from 3.76 to 15.01 mm/s, which increased the response to the tested gases (10.12 s for 1 mL of acetic acid). The intelligent label exhibited excellent sensitivity at pH values of 3-9 with highly saturated color changes. During the storage period, the label color shifted from blue-purple to yellow as acidity was increased from 17.24 to 19.8 °T due to capillarity action, providing a timely warning to consumers. The prepared colorimetric porous intelligent cellulose-based label is suitable for monitoring of MF.

The production of pH indicator Ca and Cu alginate ((1,4)- β -d-mannuronic acid and α -l-guluronic acid) cryogels containing anthocyanin obtained via red cabbage extraction for monitoring chicken fillet freshness

In recent days, intelligent food packaging has gained attention due to consumers' needs and monitoring of the freshness of food. Biopolymers are used to produce matrix parts and dye chemicals, because of their unique properties, such as biodegradability and biocompatibility. In this study, alginate molecules and anthocyanins were used to produce to monitor chicken fillet freshness via pH response characteristics. Anthocyanins' color and UV characteristics at different pHs were investigated. The obtained anthocyanin solution showed visible color response at different pH level. In the red cabbage extract, the anthocyanin concentration was as 0.65 ± 0.03 mg/g. Alginate and extracted anthocyanins from red cabbage were mixed at the solution phase, then metal alginate hydrogels were synthesized via crosslinking Ca²⁺ and Cu²⁺ with alginate molecules. Due to the porous structure of the cryogels, hydrogels were freeze dried at -80 °C for 24 h at vacuum atmosphere. The obtained cryogel indicated significant color changes from pH 4 to pH 10, and at a basic environment, the color change was observed with the naked eye. The porosity amounts and sizes of the produced cryogels were examined, the average pore amount of cryogels was found to be 85.46 ± 4.36 %, and the average pore size 97.98 ± 26.20 μm. Furthermore, it was seen that the color change was not directly related to the porosity, but the interaction of anthocyanin and metal alginate matrix effected color changes degree of cryogels. Due to the electronegativity of Cu²⁺ ions, and the use of a low amount of anthocyanin was found to be more suitable for color change. The color was changed to blue-purple while total volatile basic nitrogen content increased to 46.67 mg/100 g from 14.00 mg/100 g. As a result, prepared cryogels should be a better candidates for use as a freshness indicator and intelligent packaging.

Reflections on food security and smart packaging

Estimating the number of COVID-19 cases in 2020 exacerbated the food contamination and food supply issues. These problems make consumers more concerned about food and the need to access accurate information on food quality. One of the main methods for preserving the quality of food commodities for export, storage, and finished products is food packaging itself. In the food industry, food packaging has a significant role in the food supply which acts as a barrier against unwanted substances and preserves the quality of the food. Meanwhile, packaging waste can also harm the environment; namely, it can become waste in waterways or become garbage that accumulates because it is nonrenewable and nonbiodegradable. The problem of contaminated food caused by product packaging is also severe. Therefore, to overcome these challenges of safety, environmental impact, and sustainability, the role of food packaging becomes very important and urgent. In this review, the authors will discuss in more detail about new technologies applied in the food industry related to packaging issues to advance the utilization of Smart Packaging and Active Packaging.

Development of a Halochromic, Antimicrobial, and Antioxidant Starch-Based Film Containing Phenolic Extract from Jaboticaba Peel

In this study, the antioxidant, antimicrobial, mechanical, optical, and barrier attributes of Solanum lycocarpum starch bio-based edible films incorporated with a phenolic extract from jaboticaba peel were investigated. Aiming to determine the effect of the polymers and the phenolic extract on the properties of the films, a three-factor simplex-lattice design was employed, and the formulation optimization was based on the produced films' antioxidant potential. The optimized formulation of the starch-PEJP film showed a reddish-pink color with no cracks or bubbles and 91% antioxidant activity against DPPH radical. The optimized starch-PEJP film showed good transparency properties and a potent UV-blocking action, presenting color variation as a function of the pH values. The optimized film was also considerably resistant and highly flexible, showing a water vapor permeability of 3.28 × 10-6 g m-1 h-1 Pa-1. The microbial permeation test and antimicrobial evaluation demonstrated that the optimized starch-PEJP film avoided microbial contamination and was potent in reducing the growth of Escherichia coli, Staphylococcus aureus, and Salmonella spp. In summary, the active starch-PEJP film showed great potential as an environmentally friendly and halochromic material, presenting antioxidant and antimicrobial properties and high UV-protecting activity.

Innovative processes in smart packaging. A systematic review

Smart packaging provides one possible solution that could reduce greenhouse gas emissions. In comparison with traditional packaging, which aims to extend the product's useful life and to facilitate transport and marketing, smart packaging allows increased efficiency, for example by ensuring authenticity and traceability from the product's origin, preventing fraud and theft, and improving security. Consequently, it may help to reduce pollution, food losses, and waste associated with the food supply chain. However, some questions must be answered to fully understand the advantages and limitations of its use. What are the most suitable smart packaging technologies for use in agro-industrial subsectors such as meat, dairy, fruits, and vegetables, bakery, and pastry? What are the opportunities from a perspective of life extension, process optimization, traceability, product quality, and safety? What are the future challenges? An up-to-date, systematic review was conducted of literature relevant to the application of indicator technologies, sensors, and data carriers in smart packaging, to answer these questions. © 2022 Society of Chemical Industry.

Biopolymer Food Packaging Films Incorporated with Essential Oils

Petroleum-based packaging materials are typically nonbiodegradable, which leads to significant adverse environmental and health issues. Therefore, developing novel efficient, biodegradable, and nontoxic food packaging film materials has attracted increasing attention from researchers. Due to significant research and advanced technology, synthetic additives in packaging materials are progressively replaced with natural substances such as essential oils (EOs). EOs demonstrate favorable antioxidant and antibacterial properties, which would be an economical and effective alternative to synthetic additives. This review summarized the possible antioxidant and antimicrobial mechanisms of various EOs. We analyzed the properties and performance of food packaging films based on various biopolymers incorporated with EOs. The progress in intelligent packaging materials has been discussed as a prospect of food packaging materials. Finally, the current challenges regarding the practical application of EOs-containing biopolymer films in food packaging and areas of future research have been summarized.

pH-Responsive strips integrated with resazurin and carbon dots for monitoring shrimp freshness

Carbon dots (CDs) were synthesized via a one-step hydrothermal approach using tangerine peel (Tan) and resazurin (Res) to fabricate biocompatible indicators for food freshness. The CDs' pH-responsive mechanism, morphology, zeta potential, XPS, and optical and fluorescence analysis were investigated. The as-prepared tangerine peel/resazurin carbon dots (Tan/Res CDs) exhibited pH-responsive emission that changed from yellow to orange as the pH value increased. The Tan/Res CDs showed the sensing ability of ammonia with a detection limit of 0.84 μM by proportionally losing fluorescence intensity as the concentration increased from 1 to 100 μM. The CDs were coated onto paper strips to impart biogenic amine (BAs) detection for pH-responsive intelligent monitoring of packaged foods. The Tan/Res CDs paper-based indicator exhibited an impressive color change from yellow to brown during the detection of ammonia vapor. The indicator also showed the ability to detect BAs through a color change, demonstrating the ability to monitor the freshness of shrimp in situ. Additionally, the efficacy of the Tan/Res CDs indicator is validated by total volatile basic nitrogen (TVB-N), providing customers and suppliers with a simple, inexpensive, and portable tool to monitor the freshness of seafood in real-time.

Preparation and characterization of an intelligent film based on fish gelatin and Coleus scutellarioides anthocyanin to monitor the freshness of rainbow trout fish fillet

In this study, a pH-sensitive indicator based on fish gelatin and Coleus scutellarioides anthocyanin extract (CSAE) was prepared and characterized. Films were prepared using the solvent casting method and different levels of CSAE, including 10 ml (CSG1), 20 ml (CSG2), and 30 ml (CSG3), and 0 ml (CSG0) as a control sample. The mechanical, optical, and pH sensing of active films and the release of anthocyanins from the films were investigated. The relationship between the total volatile basic nitrogen (TVB-N) of fish fillets and a* color index of films was studied. By incorporation of CSAE, the flexibility of films increased, while the tensile strength and UV-Vis light transmittance through the films decreased (p < .05). The films containing the CSAE had a darker, yellowish, and reddish color than the control film. There was a significant relationship between the pH variation and the film color. The films had a purple color at acidic pH, and their color changed to green at an alkaline pH, indicating the sensitivity of the produced films to pH changes. There was a significant relationship between the TVB-N value of fish fillets and the a* index of the film during the 16 h storage time. The results showed that by increasing TVB-N values of the fillets, the a* color index decreased, and the films' color changed from purple to colorless. In summary, the active films prepared with fish gelatin and CSAE could be used as pH-sensitive intelligent packaging to display the freshness of fishery products.

Bilayer pH-sensitive colorimetric indicator films based on zein/gellan gum containing black rice (Oryza sativa L.) extracts for monitoring of largemouth bass (Micropterus salmoides) fillets freshness

Anthocyanins as natural pH-sensitive material can be used to determine the freshness of largemouth bass (Micropterus salmoides) fillets. However, it is easily degraded. Using zein as the protective layer to improve the light blocking ability of the film, gellan gum (GG) and black rice extracts (BRE) as the sensing layer, a bilayer colorimetric indicator film for monitoring fish spoilage was developed. The functionality and stability of bilayer film and GG single film were compared. As compared to GG single film, Zein/GG bilayer film had stronger intermolecular interactions, higher mechanical properties, and higher optical barrier properties. Notably, Zein/GG-8 % BRE bilayer film exhibited higher stability than GG-8 % BRE film when the films were exposed to room temperature for 30 days. Zein/GG-8 % BRE bilayer film were further used to monitor freshness of largemouth bass fillets during storage. Zein/GG-8 % BRE bilayer film demonstrated a noticeable color change from red to brown when largemouth bass fillets spoiled. Moreover, the ∆E of films showed a good correlation with TVB-N of largemouth bass fillets (R² = 0.985). Our research results show that the Zein/GG-BRE bilayer indicator film has great potential application prospects in monitoring fish freshness.

Intelligent pH indicator composite film based on pectin/chitosan incorporated with black rice anthocyanins for meat freshness monitoring

With the improvement of consumer awareness of food safety and the increasing concern about plastic pollution, the development of novel intelligent packaging film is imminent. This project aims to develop an environmentally friendly pH-sensitive intelligent food packaging film for meat freshness monitoring. In this study, anthocyanin-rich extract from black rice (AEBR) was added to composite film formed by the co-polymerisation of pectin and chitosan. AEBR showed strong antioxidant activity, and different colour responses to different conditions. The mechanical properties of the composite film remarkably improved when AEBR was incorporated into. Besides, the introduction of anthocyanins enables the colour of composite film to change from red to blue with the degree of meat spoilage increased which shows the indicative effect of composite films on meat putrification. Therefore, the AEBR-loaded pectin/chitosan film could be used as an indicator to monitor meat freshness in real-time.

On-package indicator films based on natural pigments and polysaccharides for monitoring food quality: a review

Deterioration of food quality and freshness is mainly due to microbial growth and enzyme activity. Chilled fresh food, especially meat and seafood, as well as pasteurized products, rapidly lose quality and freshness during packing, distribution and storage. Real-time food quality monitoring using on-package indicator films can help consumers make informed purchasing decisions. Interest in the use of intelligent packaging systems for monitoring safety and food quality has increased in recent years. Polysaccharide-based films can be developed into on-package indicator films due to their excellent film-forming properties and biodegradability. Another important component is the use of colorants with visible color changes at various pH levels. Currently, natural pigments are receiving increased attention because of their safety and environmental friendliness. This review highlights the recent findings regarding the role of natural pigments, the effects of incorporating natural pigments and polysaccharides on properties of indicator film, current application and limitations of on-package indicator films based on polysaccharides in some foods, problems and improvement of physical properties and color conversion of indicator film containing natural pigments, and development of polysaccharide-based pH-responsive films. © 2022 Society of Chemical Industry.

Colorimetric Indicators Based on Anthocyanin Polymer Composites: A Review

This review explores the colorimetric indicators based on anthocyanin polymer composites fabricated in the last decade, in order to provide a comprehensive overview of their morphological and compositional characteristics and their efficacy in their various application fields. Notably, the structural properties of the developed materials and the effect on their performance will be thoroughly and critically discussed in order to highlight their important role. Finally, yet importantly, the current challenges and the future perspectives of the use of anthocyanins as components of colorimetric indicator platforms will be highlighted, in order to stimulate the exploration of new anthocyanin sources and the in-depth investigation of all the possibilities that they can offer. This can pave the way for the development of high-end materials and the expansion of their use to new application fields.