Antilisterial and physical properties of polysaccharide-collagen films embedded with cell-free supernatant of Lactococcus lactis

Ferulic acid-arabinoxylan conjugates: Synthesis, characterization and applications in antibacterial film formation

A novel antibacterial film based on arabinoxylan (AX) was prepared by introducing ferulic acid (FA) to AX through a laccase-catalyzed procedure. The ferulic acid-arabinoxylan conjugates (FA-AX conjugates) have been characterized. Results showed that FA was successfully grafted onto the AX chains by covalent linkages, likely through nucleophilic addition between O-Ph in the phenolic hydroxyl group of FA, or through Michael addition via O-quinone intermediates. FA-AX conjugates showed improved crystallinity, thermal stability, and rheological properties, as well as a distinct surface morphology, compared with those of native AX. Moreover, FA-AX conjugates exhibited enhanced antibacterial ability against Staphylococcus aureus, Escherichia coli, Shewanella sp., and Pseudomonas sp. Mechanistic studies revealed that the enhanced antibacterial ability was due to the penetration of bacterial membrane by the phenolic molecule and the steric effect of FA-AX conjugates. The study demonstrates that the laccase-induced grafting method was effective in producing FA-AX conjugates; we have demonstrated its antibacterial ability and great potential in prolonging the shelf life of fresh seafood products.

The physicochemical properties of Cassava Starch/Carboxymethyl cellulose sodium edible film incorporated of Bacillus and its application in salmon fillet packaging

Edible film is now a trend in the food packaging industry. In this study, edible films were prepared by adding two Bacillus spp. (Bacillus amyloliquefaciens Y11 and Bacillus velezensis Y12) to a cassava starch and carboxymethyl cellulose sodium matrix. The structural, physicochemical, and biological characteristics of the film were analyzed, and its application in salmon preservation was explored. The film had a dense structure and no pores, indicating that its polymeric components were compatible with each other. The addition of Bacillus spp. increased the antioxidant activity of the film and its ability to eliminate hydroxyl radicals (84.57% and 91.86%, respectively). The film also showed good antibacterial activity against several pathogens and underwent complete degradation in natural soil within 12 days. The film significantly reduced the total coliform count of salmon and extended its shelf life by 3 days, demonstrating its value as a food-packaging material.

Incorporation of Lactococcus lactis and Chia Mucilage for Improving the Physical and Biological Properties of Gelatin-Based Coating: Application for Strawberry Preservation

In this work, a gelatin/chia mucilage (GN/CM) composite coating material doped with Lactococcus lactis (LS) was developed for strawberry preservation applications. The results of the scanning electron microscope and Fourier transform infrared spectroscopy stated that the enhanced molecular interaction between the CM and GN matrix strengthened the density and compactness of the GN film. Antifungal results indicated that the addition of LS significantly (p < 0.05) improved the ability of the GN coating to inhibit the growth of Botrytis cinerea (inhibition percentage = 62.0 ± 4.6%). Adding CM significantly (p < 0.05) decreased the water vapour permeability and oxygen permeability of the GN coating by 32.7 ± 4.0% and 15.76 ± 1.89%, respectively. In addition, the incorporated CM also significantly (p < 0.05) improved the LS viability and elongation at break of the film by 13.11 ± 2.05% and 42.58 ± 1.21%, respectively. The GN/CM/LS composite coating material also exhibited an excellent washability. The results of this study indicated that the developed GN/CM/LS coating could be used as a novel active material for strawberry preservation.

Production of bacterial cellulose (BC)/nisin composite with enhanced antibacterial and mechanical properties through co-cultivation of Komagataeibacter xylinum and Lactococcus lactis subsp. lactis

By employing co-cultivation technique on Komagataeibacter xylinum and Lactococcus lactis subsp. lactis, bacterial cellulose (BC)/nisin films with improved antibacterial activity and mechanical properties were successfully produced. The findings demonstrated that increased nisin production is associated with an upregulation of gene expression. Furthermore, results from Scanning electronic microscopy (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Thermogravimetric analysis (TG) confirmed the integration of nisin within BC. While being biocompatible with human cells, the BC/nisin composites exhibited antimicrobial activity. Moreover, mechanical property analyses showed a noticeable improvement in Young's modulus, tensile strength, and elongation at break by 161, 271, and 195 %, respectively. Additionally, the nisin content in fermentation broth was improved by 170 % after co-culture, accompanied by an 8 % increase in pH as well as 10 % decrease in lactate concentration. Real-time reverse transcription PCR analysis revealed an upregulation of 11 nisin-related genes after co-cultivation, with the highest increase in nisA (5.76-fold). To our knowledge, this is the first study which demonstrates that an increase in secondary metabolites after co-culturing is modulated by gene expression. This research offers a cost-effective approach for BC composite production and presents a technique to enhance metabolite concentration through the regulation of relevant genes.

Physicochemical, thermal, pasting, morphological, functional and bioactive binding characteristics of starches of different oat varieties of North-Western Himalayas

Starches were isolated from five oat varieties (SFO-1, SFO-3, Sabzar, SKO-20 and SKO-96) grown in North-Western Himalayas of India. Moisture content of the varieties ranged from 9.25 ± 0.09 to 13.21 ± 0.11 %, indicating their shelf-stability. Results suggested >90 % purity of starches as was evident from values of ash, proteins, and lipids. Amylose content results showed that all starches fall within category of intermediate-amylose starches. Lambdamax, blue value and OD620/550 were found significantly (p ≤ 0.05) higher in SKO-20. Sabzar exhibited higher starch hydrolysis percentage of 85.16 % whereas, lowest was observed in SKO-20 (78.12 %). Degree of syneresis was higher in SKO-20 however, its freeze-thaw stability was lesser. Wide peak in FTIR spectra at 3320 cm-1 confirms nature of starches. SKO-20 exhibited significantly higher onset gelatinization temperature (65.19 ± 1.06 °C) and enthalpy (15.78 ± 0.15 J/g) whereas, Sabzar exhibited lowest enthalpy. Pasting characteristics indicated lowest and highest final viscosity in SKO-20 (341.30 ± 2.11 mPas) and SKO-96 (1470 ± 4.56 mPas), respectively. SEM results indicated irregular and polygonal shape of starches with size <10 μm. SKO-20 exhibited lowest disintegration time of 2.08 ± 0.01 min and Sabzar showed highest (3.31 ± 0.07 min). SKO-20 released more curcumin (71.28 %) whereas, Sabzar released less. This suggests that SKO-20 could be used as better excipient for delivery of curcumin at target site.

Application of a Chitosan-based Active Packaging Film Prepared with Cell-free Supernatant of Lacticaseibacillus paracasei ALAC-4 in Mongolian Cheese Preservation

Fungal spoilage of food is a worldwide concern prompting the development of many antimicrobial agents and applications. In this study, the cell-free supernatant (CFS) of Lacticaseibacillus paracasei ALAC-4 had a significant inhibition effect on fungi. The CFS with antifungal activities were combined with chitosan (CS) matrix to prepare an active packaging CS-CFS films by using a solvent casting method and used for the packaging of Mongolian cheese for 15 days during storage at 4 ± 1℃. The optimized formulation of the film were 1.25% (w/v) chitosan, 1.75% (w/v) gelatin, 0.3% (v/v) glycerol, and 9.6% (w/v) CFS. It was found that CS-CFS films exhibited strong antifungal activities against molds and yeasts, especially Candida albicans, and also had excellent mechanical properties. Additionally, FTIR spectroscopy indicated that hydrogen bonds between the CFS and CS formed, and there was a smooth surface, compact cross-section observed in SEM morphologies of CS-CFS films. Furthermore, CS-CFS film also displayed a strong antifungal effect against molds and yeasts on cheese surface. These results suggest that the chitosan-based CS-CFS film has a promising application for Mongolian cheese and food preservation.

The potential of postbiotics as a novel approach in food packaging and biopreservation: a systematic review of the latest developments

Metabolic by-products are part of the so-called postbiotics of probiotics and other beneficial microorganisms, particularly lactic acid bacteria, which have gained popularity as a feasible alternative to improving food quality and safety. Postbiotics in dry and liquid forms can be easily integrated into food formulations and packaging materials, exhibiting antimicrobial and antioxidant effects owing to the presence of multiple antimicrobials, such as organic acids, bacteriocins, exopolysaccharides and bioactive peptides. Postbiotics can thus control the growth of pathogens and spoilage microorganisms, thereby extending the shelf life of food products. Because of their ability to be easily manufactured without requiring extensive processing, postbiotics are regarded as a safer and more sustainable alternative to synthetic preservatives, which can have negative environmental consequences. Additionally, food manufacturers can readily adopt postbiotics in food formulations without significant modifications. This systematic review provides an in-depth analysis of studies on the use of postbiotics in the biopreservation and packaging of a wide range of food products. The review evaluates and discusses the types of microorganisms, postbiotics preparation and modification techniques, methods of usage in dairy products, meat, poultry, seafood, fruits, vegetables, bread, and egg, and their effects on food quality and safety.

Development and characterization of a novel sodium alginate based active film supplemented with Lactiplantibacillus plantarum postbiotic

In this study, sodium alginate based biodegradable films were prepared by the supplementation with postbiotics of Lactiplantibacillus plantarum subsp. plantarum (L. plantarum) W2 strain and the effect of probiotics (probiotic-SA film) and postbiotics (postbiotic-SA film) incorporation on physical, mechanical (tensile strength and elongation at break), barrier (oxygen and water vapor permeability), thermal and antimicrobial properties of the films were investigated. The pH, titratable acidity and brix of the postbiotic was 4.02, 1.24 % and 8.37, respectively while gallic acid, protocatechuic acid, myricetin and catechin were the major phenolic compounds. Mechanical and barrier properties of the alginate-based films were improved by probiotic or postbiotic supplementation while postbiotic showed a more pronounced (P < 0.05) effect. Thermal analysis showed that postbiotics supplementation increased thermal stability of the films. In FTIR spectra, the absorption peaks at 2341 and 2317 cm^-1 for probiotic-SA and postbiotic-SA edible films confirmed the incorporation of probiotics/postbiotics of L. plantarum W2 strain. Postbiotic supplemented films showed strong antibacterial activity against gram-positive (L. monocytogenes, S. aureus and B. cereus) and one gram-negative bacterial strain (E. coli O157:H7) while probiotic incorporation did not add an antibacterial effect to the films. SEM images revealed that the supplementation of postbiotics provided a rougher and rigid film surface. Overall, this paper brought a new perspective for development of novel active biodegradable films by incorporation of postbiotics with improved performance.

A rethinking of collagen as tough biomaterials in meat packaging: assembly from native to synthetic

Due to the high moisture-associated typical rheology and the changeable and harsh processing conditions in the production process, packaging materials for meat products have higher requirements including a sufficient mechanical strength and proper ductility. Collagen, a highly conserved structural protein consisting of a triple helix of Gly-X-Y repeats, has been proved to be suitable packaging material for meat products. The treated animal digestive tract (i.e. the casing) is the perfect natural packaging material for wrapping meat into sausage. Its thin walls, strong toughness and impact resistance make it the oldest and best edible meat packaging. Collagen casing is another wisdom of meat packaging, which is made by collagen fibers from hide skin, presenting a rapid growth in casing market. To strengthen mechanical strength and barrier behaviors of collagen-based packaging materials, different physical, chemical, and biological cross-linking methods are springing up exuberantly, as well as a variety of reinforcement approaches including nanotechnology. In addition, the rapid development of biomimetic technology also provides a good research idea and means for the promotion of collagen's assembly and relevant mechanical properties. This review can offer some reference on fundamental theory and practical application of collagenous materials in meat products.

Potential application of postbiotics metabolites from bioprotective culture to fabricate bacterial nanocellulose based antimicrobial packaging material

Postbiotics (P) of FreshQ, a food protective culture, was prepared and used to develop an antimicrobial membrane by bacterial nanocellulose (BNC). Postbiotics were prepared in de Man, Rogosa and Sharpe medium and freeze-dried. The chemical composition was investigated by GC-MS and the antibacterial activity of postbiotics on different bacterial and fungal strains was investigated. Finally, postbiotics were included in wet and lyophilized BNC by ex-situ method, and their antibacterial activity and FTIR specifications were studied. The GC-MS analysis of postbiotics revealed the presence of fatty acids, alkanes, aldehydes, hydrocarbones fatty acid esters, propionic acid, and certain antibacterial and antifungal compounds such as 2,4-Di-tert-butyl phenol and dotriacontane. Postbiotics revealed antibacterial activity on all investigated strains in a concentration-dependent manner and as the concentation decreased, there was a significant reduction in antimicrobial effects. The zone of inhibition for all bacterial pathogens exceeded 20 mm, then they were classified as "extremely sensitive microorganisms" to the postbiotics at 50 % concentration, while fungal strains revealed a lower zone of inhibition (<17 mm). The order of antimicrobial susceptibility was as follows: Listeria monocytogenes > Staphylococcus aureus > Escherichia coli > Salmonella Typhimurium > Aspergillus flavus > Penicillium citrinum. We also recognized that P-BNC in wet form has significant antimicrobial activity than lyophilized form due to the high adsorption capacity and open 3D structure of BNC in wet form. The fabricated material can serve as an antimicrobial membrane for food applications.

Ecofriendly green biosynthesis and characterization of novel bacteriocin-loaded bacterial cellulose nanofiber from Gluconobacter cerinus HDX-1

A new strain of bacterial cellulose (BC)-producing Gluconobacter cerinus HDX-1 was isolated and identified, and a simple, low-cost complexation method was used to biosynthesis Lactobacillus paracasei 1∙7 bacteriocin BC (BC-B) nanofiber. The structure and antibacterial properties of the nanofibers were evaluated. Solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR) and x-ray diffraction (XRD) analysis showed that BC and BC-B nanofibers had typical crystalline form of the cellulose I. X-ray photoelectron spectrometer (XPS), scanning electron microscope (SEM) and atomic force microscopy (AFM) revealed that the bacteriocin and BC were successfully compounded, and the structure of BC-B nanofiber was tighter than BC nanofiber, with lower porosity, swelling ratio and water vapor transmission rate (WVTR). The tensile strength and Young's modulus of BC-B nanofibers were 13.28 ± 1.26 MPa and 132.10 ± 4.92 MPa, respectively, higher than that of BC nanofiber (6.12 ± 0.87 MPa and 101.59 ± 5.87 MPa), indicating that bacteriocin enhance the mechanical properties of BC nanofiber. Furthermore, the BC-B nanofibers exhibited significant thermal stability, antioxidant capacity and antibacterial activity than BC nanofiber. Therefore, bacteriocin-loaded BC nanofiber may be used as antimicrobial agents in active food packaging and medical material.

The impacts of antimicrobial and antifungal activity of cell-free supernatants from lactic acid bacteria in vitro and foods

Lactic acid bacteria (LAB) are distinguished by their ability to produce lactic acid, among other interesting metabolites with antimicrobial activity. A cell-free supernatant (CFS) is a liquid containing the metabolites resulting from microbial growth and the residual nutrients of the medium used. CFS from LAB can have antimicrobial activity due to organic acids, fatty acids, and proteinaceous compounds, among other compounds. This review aims to summarize the information about CFS production, CFS composition, and the antimicrobial (antibacterial and antifungal) activity of CFS from LAB in vitro, on foods, and in active packaging. In addition, the mechanisms of action of CFS on cells, the stability of CFS during storage, CFS cytotoxicity, and the safety of CFS are reviewed. The main findings are that CFS's antibacterial and antifungal activity in vitro has been widely studied, particularly in members of the genus Lactobacillus. CFS has produced strong inhibition of bacteria and molds on foods when applied directly or in active packaging. In most studies, the compounds responsible for antimicrobial activity are identified. A few studies indicate that CFSs are stable for 1 to 5 months at temperatures ranging from 4 to 35°C. The cytotoxicity of CFS on human cells has not been well studied. However, the studies that have been performed reported no toxicity of CFS. Therefore, it is necessary to investigate novel growth mediums for CFS preparation that are compatible with food sensory properties. More studies into CFS stability and cytotoxic effects are also needed.

Natural Antimicrobials as Additives for Edible Food Packaging Applications: A Review

Edible packaging is a swiftly emerging art of science in which edible biopolymers like lipids, polysaccharides, proteins, resins, etc., and other consumable constituents extracted from various non-conventional sources are used alone or imbibed together. Edible packaging with antimicrobial components had led to the development of the hypothesis of active packaging which safeguards the quality of foods as well as health of consumers. Natural antimicrobial agents (NAMAs) like essential oils from spices, bioactive compounds derived from vegetables and fruits, animal and microorganism derived compounds having antimicrobial properties can be potentially used in edible films as superior replcement for synthetic compounds, thus serving the purpose of quality and heath. Most of the natural antimicrobial agents enjoy GRAS status and are safer than their synthetic counterparts. This review focuses on updated literature on the sources, properties and potential applications of NAMAs in the food industry. This review also analyzes the biodegradability and biocompatibility and edibility properties of NAMAs enriched films and it can be concluded that NAMAs are better substitutes but affect the organoleptic as well as the mechanical properties of the films. Despite many advantages, the inclusion of NAMAs into the films needs to be investigated more to quantify the inhibitory concentration without affecting the properties of films and exerting potential antimicrobial action to ensure food safety.

Biodegradable Packaging Materials from Animal Processing Co-Products and Wastes: An Overview

Biodegradable polymers are non-toxic, environmentally friendly biopolymers with considerable mechanical and barrier properties that can be degraded in industrial or home composting conditions. These biopolymers can be generated from sustainable natural sources or from the agricultural and animal processing co-products and wastes. Animals processing co-products are low value, underutilized, non-meat components that are generally generated from meat processing or slaughterhouse such as hide, blood, some offal etc. These are often converted into low-value products such as animal feed or in some cases disposed of as waste. Collagen, gelatin, keratin, myofibrillar proteins, and chitosan are the major value-added biopolymers obtained from the processing of animal's products. While these have many applications in food and pharmaceutical industries, a significant amount is underutilized and therefore hold potential for use in the generation of bioplastics. This review summarizes the research progress on the utilization of meat processing co-products to fabricate biodegradable polymers with the main focus on food industry applications. In addition, the factors affecting the application of biodegradable polymers in the packaging sector, their current industrial status, and regulations are also discussed.

Health-Promoting Properties of Lactobacilli in Fermented Dairy Products

Bacteria of the genus Lactobacillus have been employed in food fermentation for decades. Fermented dairy products, such as cheese and yogurt, are products of high value known as functional food and widely consumed due to their positive health impact. Fermentation was originally based on conversion of carbohydrate into organic acids, mostly lactic acid, intended to preserve nutrient in milk, but then it develops in other disclosure of capabilities associates with health benefit. It is expected that during the manufacture of fermented dairy products, some bioactive peptides from milk protein are released through proteolysis. Lactobacilli have been recognized and received increasing attention as probiotics by balancing gut microbial population. Information of molecular mechanisms of genome sequence focusing on the microbial that normally inhabit gut may explain as to how these bacteria positively give impact on improving host health. Recent post-biotics concept revealed that health benefit can also be associated after bacterial lysis. This mini review focuses on the contribution of lactobacilli in dairy fermentation with health-promoting properties on human health.

Physical and antibacterial properties of bacterial cellulose films supplemented with cell-free supernatant enterocin-producing Enterococcus faecium TJUQ1

In this study, a composite film was prepared with bacterial cellulose (BC) of Gluconacetobacter xylinus and cell-free supernatant (CFS) of Enterococcus faecium TJUQ1, which was named BC-E. The optimum conditions for the preparation of the composite film with a minimal antibacterial activity were the soak of BC in 80 AU/mL CFS for 6 h. By scanning electron microscope observation, the surface network structure of BC-E was denser than that of BC. The tensile strength of BC and BC-E was 4.65 ± 0.88 MPa and 16.30 ± 0.92 MPa, the elongation at break of BC and BC-E was 3.33 ± 0.89% and 31.60 ± 1.15%, respectively, indicating the mechanical properties of BC-E were significantly higher than that of BC (P < 0.05). The swelling ratio of BC-E (456.67 ± 7.20%) was lower than that of BC (1377.78 ± 9.07%), demonstrating BC-E films presented better water resistance. BC-E films were soaked with 320 AU/mL CFS, and then used to pack the ground meat with 6.55 log₁₀ CFU/g of Listeria monocytogenes. After 8 days of storage, the number of bacteria decreased by 3.16 log₁₀ CFU/g. Similarly, total mesophilic bacterial levels in the ground meat decreased by 2.41 log₁₀ CFU/g compared to control groups.

Improving nisin production by encapsulated Lactococcus lactis with starch/carboxymethyl cellulose edible films

In this study, Lactococcus lactis was embedded in a film of corn starch (NS) and carboxymethyl cellulose (CMC) prepared using a casting method. At a CMC:NS ratio of 5:5, the composite film had the best comprehensive properties. Scanning electron microscopy images clearly showed that L. lactis was effectively embedded. The film with 1.5 % L. lactis showed the best performance and the lowest water vapor transmission rate (5.54 × 10^-11 g/m s Pa. In addition, the edible film retained a viable count of 5.64 log CFU/g of L. lactis when stored at 4 °C for 30 days. The composite film with 1.5 % L. lactis showed the highest release of nisin (3.35 mg/mL) and good antibacterial activity against Staphylococcus aureus (53.53 %) after 8 days. Therefore, this edible film is a viable alternative antimicrobial strategy for the active packaging of foods containing low moisture content.

Postbiotics produced by lactic acid bacteria: The next frontier in food safety

There are many critical challenges in the use of primary and secondary cultures and their biological compounds in food commodities. An alternative is the application of postbiotics from the starter and protective lactic acid bacteria (LAB). The concept of postbiotics is relatively new and there is still not a recognized definition for this term. The word "postbiotics" is currently used to refer to bioactive compounds, which did not fit to the traditional definitions of probiotics, prebiotics, and paraprobiotics. Therefore, the postbiotics may be presently defined as bioactive soluble factors (products or metabolic byproducts), produced by some food-grade microorganisms during the growth and fermentation in complex microbiological culture (in this case named cell-free supernatant), food, or gut, which exert some benefits to the food or the consumer. Many LAB are considered probiotic and their postbiotic compounds present similar or additional health benefits to the consumer; however, this review aimed to address the most recent applications of the postbiotics with food safety purposes. The potential applications of postbiotics in food biopreservation, food packaging, and biofilm control were reviewed. The current uses of postbiotics in the reduction and biodegradation of some food safety-related chemical contaminants (e.g., biogenic amines) were considered. We also discussed the safety aspects, the obstacles, and future perspectives of using postbiotics in the food industry. This work will open up new insights for food applications of postbiotics prepared from LAB.

Functionalizing and bio-preserving processed food products via probiotic and synbiotic edible films and coatings

Edible films and coatings constitute an appealing concept of innovative, cost-effective, sustainable and eco-friendly packaging solution for food industry applications. Edible packaging needs to comply with several technological pre-requisites such as mechanical durability, low permeability to water vapor and gases, good optical properties, low susceptibility to chemical or microbiological alterations and neutral sensory profile. Over the past few years, functionalization of edible films and coatings via the inclusion of bioactive compounds (antioxidants, micronutrients, antimicrobials, natural coloring and pigmentation agents) and beneficial living microorganisms has received much attention. As for living microorganisms, probiotic bacterial cells, primarily belonging to the Lactobacilli or Bifidobacteria genera, have been exploited to impart bespoke health and biopreservation benefits to processed food. Given that the health benefit conferring and biopreservation potential of probiotics is dependent on several extrinsic and intrinsic parameters, the development of probiotic and synbiotic edible packaging concepts is a quite challenging task. In the present chapter, we aimed at a timely overview of the technological advances in the field of probiotic, symbiotic and synbiotic edible films and coatings. The individual or combined effects of intrinsic (matrix composition and physical state, pH, dissolved oxygen, water activity, presence of growth stimulants or inhibitors) and extrinsic (film forming method, food processing, storage time and conditions, exposure to gastrointestinal conditions) factors on maintaining the biological activity of probiotic cells were addressed. Moreover, the impact of living cells inclusion on the mechanical, physicochemical and barrier properties of the edible packaging material as well as on the shelf-life and quality of the coated or wrapped food products, were duly discussed.

Structure-properties relationship of chitosan/collagen films with potential for biomedical applications

Chitosan/collagen films were developed and characterized in order to assess the suitability of these films for biomedical applications. Hence, physicochemical, thermal, barrier and mechanical properties were analyzed and related to the film structure, which showed the prevalence of the triple helix of native collagen after the addition of chitosan. Furthermore, collagen fiber diameter changed from 3.9 ± 0.6 μm, for collagen films without chitosan, to 1.8 ± 0.5 μm, for collagen films with low molecular weight chitosan. These results suggested interactions between collagen and chitosan molecules, as observed by Fourier transform infrared (FTIR) analysis. Regarding film barrier properties, chitosan/collagen films showed a water vapor transmission rate around 1174 g m^-2 day^-1, suitable for biomedical applications such as wound healing. Additionally, biological tests confirmed that the chitosan/collagen films developed are suitable for biomedical applications.