Adsorption of Cr(III) and Pb(II) by graphene oxide/alginate hydrogel membrane: Characterization, adsorption kinetics, isotherm and thermodynamics studies

Clay-polymer hybrid hydrogels in the vanguard of technological innovations for bioremediation, metal biorecovery, and diverse applications

Polymeric hydrogels are among the most studied materials due to their exceptional properties for many applications. In addition to organic and inorganic-based hydrogels, "hybrid hydrogels" have been gaining significant relevance in recent years due to their enhanced mechanical properties and a broader range of functionalities while maintaining good biocompatibility. In this sense, the addition of micro- and nanoscale clay particles seems promising for improving the physical, chemical, and biological properties of hydrogels. Nanoclays can contribute to the physical cross-linking of polymers, enhancing their mechanical strength and their swelling and biocompatibility properties. Nowadays, they are being investigated for their potential use in a wide range of applications, including medicine, industry, and environmental decontamination. The use of microorganisms for the decontamination of environments impacted by toxic compounds, known as bioremediation, represents one of the most promising approaches to address global pollution. The immobilization of microorganisms in polymeric hydrogel matrices is an attractive procedure that can offer several advantages, such as improving the preservation of cellular integrity, and facilitating cell separation, recovery, and transport. Cell immobilization also facilitates the biorecovery of critical materials from wastes within the framework of the circular economy. The present work aims to present an up-to-date overview on the different "hybrid hydrogels" used to date for bioremediation of toxic metals and recovery of critical materials, among other applications, highlighting possible drawbacks and gaps in research. This will provide the latest trends and advancements in the field and contribute to search for effective bioremediation strategies and critical materials recovery technologies.

Efficient removal of cationic dyes using lemon peel-chitosan hydrogel composite: RSM-CCD optimization and adsorption studies

The most prominent and easily identifiable factor of water purity is its colour, which may be both physically undesirable, and act as an alert towards potential environmental contamination. The current study describes the optimum synthesis technique for Lemon Peel-Chitosan hydrogel using the Response Surface Methodology integrated Central composite Design (RSM-CCD). This adsorbent is both environmentally friendly and cost-effective. The hydrogel exhibited a maximal dye removal capacity of 24.984, 24.788, 24.862, 23.483, 24.409, and 24.726 mg g-1, for 10 mg L-1 aqueous medium of Safranin O, Methylene blue, Basic fuchsin, Toluidine blue, Brilliant green and Crystal violet, respectively. The adsorption kinetics and isotherm data suggest that the Pseudo second-order kinetic and Freundlich adsorption isotherm models precisely represent the respective behaviour of all the dyes. The thermodynamic viability of the process is determined by the values of ΔG, ΔH, and ΔS. The probable mechanism of adsorption was the electrostatic interaction between the dye molecules and the hydrogel. The regenerated hydrogel had removal efficiencies of over 80 % even after enduring six cycles. Hence, the exceptional recyclability and utility of the adsorbent show their sustainability for wastewater treatment in textile factories.

Development of porous materials via protein/polysaccharides/polyphenols nanoparticles stabilized Pickering high internal phase emulsions for adsorption of Pb2+ and Cu2+ ions

The porous materials (PM) were prepared by the Pickering high internal phase emulsion (PHIPE) template. Firstly, the nanoparticles named as ZHMNPs or MZHMNPs were fabricated based on zein, Hohenbuehelia serotina polysaccharides and Malus baccata (Linn.) Borkh polyphenols without or with Maillard reaction, the average particle sizes and zeta potentials of which were distributed in a range of 718.1-979.4 nm and -21.6-25.2 mV. ZHMNPs possessed the relatively uniform spherical morphology, while MZHMNPs were irregular in shape. With ZHMNPs or MZHMNPs serving as the stabilizers, the PHIPEs were prepared, and exhibited the good viscoelasticity and excellent storage and freeze-thaw stabilities. Based on above PHIPEs template, the constructed PM possessed the large specific surface area and uniform pore structure. Through the investigations of adsorption performances, PM showed the outstanding adsorption capacities on Pb2+ and Cu2+ ions regardless of dissolving in deionized water or simulated gastrointestinal digestive fluid. Furthermore, the results also showed that the pH, temperature and adsorbent dosage had certain impacts on the adsorption performances of PM on Pb2+ and Cu2+ ions.

Exploring the sustainable elimination of dye using cellulose nanofibrils- vinyl resin based nanofiltration membranes

This study focuses on the development of a novel self-cleaning nanofiltration membrane for the efficient removal of the cationic dye methylene blue (MB) from industrial wastewater. The membrane is composed of vinyl resin (VR), cellulose nanofibrils (CNF), and titanium alpha aluminate (TAAL) nanoparticles.The TAAL loading ranged from 1 to 5 wt%, the pH varied from 5 to 10, and the initial MB concentration ranged from 10 to 50 ppm. Using a dead-end filtration system, the (VR/CNF@TAAL) membrane with 5 wt% TAAL at pH 10 demonstrated excellent performances. It achieved a remarkable 98.6% removal efficiency for 30 ppm MB dye, with a maximum adsorption capacity of 125.8 mg/g. The adsorption kinetics analysis revealed that the process followed the pseudo-second-order model, indicating a chemisorption mechanism. The rate constant was determined to be 1.2732 × 10-3 g mg-1 min-1. The Freundlich isotherm model provided a better fit (R2 = 0.996) than the Langmuir model, suggesting multilayer adsorption on the nanocomposite membrane surface. In addition to its high adsorption and filtration capabilities, the (VR/CNF@TAAL) nanocomposite membrane exhibited cost-effectiveness and environmental friendliness as an adsorbent for MB removal from industrial wastewater. The membrane's self-cleaning property further contributes to sustainability by reducing the need for additional chemical treatments.

Amino-modified upcycled biochar achieves selective chromium removal in complex aqueous matrices

Chromium pollution of groundwater sources is a growing global issue, which correlates with various anthropogenic activities. Remediation of both the Cr(VI) and Cr(III), via adsorption technologies, has been championed in recent years due to ease of use, minimal energy requirements, and the potential to serve as a highly sustainable remediation technology. In the present study, a biochar sorbent sourced from pineapple skins, allowed for the upcycling of agricultural waste into water purification technology. The biochar material was chemically modified, through a green amination method, to produce an efficient and selective adsorbent for the removal of both Cr(VI) and Cr(III) from complex aqueous matrices. From FTIR analysis it was evident that the chemical modification introduced new C-N and N-H bonds observed in the modified biochar along with a depletion of N-O and C-H bonds found in the pristine biochar. The amino modified biochar was found to spontaneously adsorb both forms of chromium at room temperature, with binding capacities of 46.5 mg/g of Cr(VI) and 27.1 mg/g of Cr(III). Interference studies, conducted in complex matrices, showed no change in adsorption capacity for Cr(VI) in matrices containing up to 3,000× the concentration of interfering ions. Finally, Cr(III) removal was synergized to 100% adsorption at interfering ions concentrations up to 330× of the analyte, which were suppressed at higher interference concentrations. Considering such performance, the amino modified biochar achieved selective removal for both forms of chromium, showing great potential for utilization in complex chromium pollution sources.

Characterization and application of synthesized calcium alginate-graphene oxide for the removal of Cr3+, Cu2+ and Cd2+ ions from tannery effluents

Environmental sustainability has gained acceptance to achieving the goal of a secure ecosystem with a reliable management system. Heavy metal remediation of aqueous streams is of special concern due to the intractability and persistence in the environment. Adsorption is a potential alternative to the existing inefficient conventional technologies for the removal and recovery of metal ions from aqueous solutions and becomes vital to align with the Sustainable Development Goals (SDGs) and mitigate the adverse environmental and social impacts. Calcium Alginate-Graphene oxide (CA-GO) composite has been synthesized for the adsorption of heavy metals including Cr3+, Cu2+, and Cd2+ ions from tannery effluents. Graphene oxide is prepared from commercial graphite powder and reacted with sodium alginate and calcium chloride to form the beads of CA-GO composite. The developed composite was characterized by FTIR, elemental analysis, SEM, XRD analysis, and Raman spectroscopy. Moreover, the effect of pH, adsorbent dosage, contact time, and initial concentration of metal ions on the adsorption capacity were investigated through batch experiments. At a pH>3.0 (pHzpc), the carboxyl group of CA-GO was deprotonated to make the surface negatively charged and facilitate metal adsorption. The optimum pH and maximum adsorption capacity of CA-GO for removal of Cr(III), Cu(II), and Cd(II) were 4.5, 6.0, and 7.0, and 90.58, 108.57, and 134.77 mg g-1, respectively. The kinetics, adsorption isotherms, and thermodynamics were studied to determine the adsorption mechanism. The kinetic of adsorption adopted the second-order model. Thermodynamic parameter were calculated and the adsorption process was determined to be exothermic and spontaneous at room temperature. The developed composite has been efficaciously applied for the removal of metal ions and pollution from real tannery effluents.

Adsorption of Chromium (III) and Chromium (VI) Ions from Aqueous Solution Using Chitosan-Clay Composite Materials

In this work, biopolymer chitosan and natural clay were used to obtain composite materials. The overall aim of this study was to improve the properties (porosity, thermal stability and density) of pure chitosan beads by the addition of clay and to obtain a chitosan-based composite material for the adsorption of heavy metals from an aqueous solution, using Mongolian resources, and to study the adsorption mechanism. The natural clay was pre-treated with acid and heat to remove the impurities. The chitosan and pre-treated clay were mixed in different ratios (8:1, 8:2 and 8:3) for chemical processing to obtain a composite bead for the adsorption of chromium ions. The adsorption of Cr(III) and Cr(VI) was studied as a function of the solution pH, time, temperature, initial concentration of the chromium solution and mass of the composite bead. It was found that the composite bead obtained from the mixture of chitosan and treated clay with a mass ratio of 8:1 and 8:2 had the highest adsorption capacity (23.5 and 17.31 mg·g-1) for Cr(III) and Cr(VI), respectively, in the optimum conditions. The properties of the composite materials, prepared by mixing chitosan and clay with a ratio of 8:1 and 8:2, were investigated using XRD, SEM-EDS, BET and TG analysis. The adsorption mechanism was discussed based on the XPS analysis results. It was confirmed that the chromium ions were adsorbed in their original form, such as Cr(III) and Cr(VI), without undergoing oxidation or reduction reactions. Furthermore, Cr(III) and Cr(VI) were associated with the hydroxyl and amino groups of the composite beads during adsorption. The kinetic, thermodynamic and isothermal analysis of the adsorption process revealed that the interaction between the chitosan/clay composite bead and Cr(III) and Cr(VI) ions can be considered as a second-order endothermic reaction, as such the adsorption can be assessed using the Langmuir isotherm model. It was concluded that the composite bead could be used as an adsorbent for the removal of chromium ions.

Tetraethylenepentamine-Grafted Amino Terephthalic Acid-Modified Activated Carbon as a Novel Adsorbent for Efficient Removal of Toxic Pb(II) from Water

In this study, a new composite, tetraethylenepentamine (TEPA), was incorporated into amino terephthalic acid-modified activated carbon (ATA@AC) through a one-pot integration of TEPA with the COOH moiety of ATA@AC. This process resulted in the creation of a TEPA@ATA@AC composite for Pb(II) removal from an aquatic environment. Several techniques, including SEM, EDX, FT-IR, TGA, XRD, and Zeta potential, were employed to emphasize the chemical composition, morphology, and thermal durability of the as-synthesized TEPA@ATA@AC composite. The impact of experimental variables on the adsorption of Pb(II) ions was studied using batch adsorption. The uptake assessment suggested that the TEPA@ATA@AC composite exhibited superior Pb(II) removal performance with high removal efficiency (97.65%) at pH = 6.5, dosage = 0.02 g, equilibrium time = 300 min, and temperature = 298 K. The isotherm data exhibited good conformity with the Langmuir isotherm model, whereas the kinetics data displayed strong agreement with both pseudo-first-order and pseudo-second-order kinetics models. This reflected that the Pb((II) uptake by the TEPA@ATA@AC composite was caused by physisorption coupled with limited chemisorption. The greatest monolayer uptake capacity of the TEPA@ATA@AC composite was 432.8 mg/g. The thermodynamic findings indicated that the Pb(II) uptake on the TEPA@ATA@AC composite was an exothermic and feasible process. After five adsorption-desorption runs, the TEPA@ATA@AC composite maintained a superior uptake capacity (83.80%). In summary, the TEPA@ATA@AC composite shows promise as a potent adsorbent for effectively removing Cr(VI) from contaminated water, with impressive removal efficiency.

Alginate-encapsulated biochar as an effective soil ameliorant for reducing Pb phytoavailability to lettuce (Lactuca sativa L.)

The alginate-biochar formulation for metal removal from aquatic environments has been widely tried but its use for lowering phytoavailability of metals in the soil-crop continuum is limited. Biochar has been increasingly used as a soil amendment due to its potential for soil carbon sequestration and sorption capacity. Handling of powdery biochar as a soil top-dressing material is, however, cumbersome and vulnerable to loss by water and wind. In this experiment, biochar powder, which was pyrolyzed from oak trees, was encapsulated into beads with alginate, which is a naturally occurring polysaccharide found in brown algae. Both batch and pot experiments were conducted to examine the effects of the alginate-encapsulated biochar beads (BB), as compared to its original biochar powdery form (BP), on the Pb adsorption capacity and phytoavailability of soil Pb to lettuce (Lactuca sativa L.). The BB treatment improved reactivity about six times due to a higher surface area (287 m2 g-1) and five times due to a higher cation exchange capacity (50 cmolc kg-1) as compared to the BP treatment. The maximum sorption capacity of Pb was increased to 152 from 81 mg g-1 because of surface chemosorption. Adsorption of Pb onto BB followed multiple first-order kinetics and comprised fast and slow steps. More than 60% of the Pb was adsorbed in the fast step, i.e., within 3 h. Also, the BB treatment, up to the 5% level (w/w), increased soil pH from 5.4 to 6.5 and lowered the phytoavailable fraction of Pb in soil from 5.7 to 0.3 mg kg-1. The Pb concentrations in lettuce cultivated at 5% for the BP and BB treatments were similar but 63 and 66% lower, respectively, than those of the control soil. The results showed that the encapsulation of biochar with alginate enhanced adsorption by the biochar.

Separation of the heme protein cytochrome C using a 3D structured graphene oxide bionanocomposite as an adsorbent

Proteins are of great importance for medicine and the pharmaceutical and food industries. However, proteins need to be purified prior to their application. This work investigated the application of a hydrogel bionanocomposite based on agar and graphene oxide (GO) for capturing cytochrome C (Cyto C) heme protein by adsorption from aqueous solutions with other proteins. Although applications of GO-based materials in adsorption are widely studied, the focus on semi-continuous processes remains limited. Adsorption experiments were carried out in batch and fixed bed columns. The effect of pH and ionic strength on adsorption was investigated, and there is evidence that electrostatic interactions between Cyto C and the nanocomposite were favoured at pH = 7; the adsorption capacity decreased as NaCl and KCl concentrations increased, ascribed to the weak electrostatic interaction between the protein and GO active sites in the bionanocomposite. All adsorption isotherm models (Langmuir, Freundlich, Sips) used gave suitable adjustments to the equilibrium experimental data and the kinetic models applied. The maximum adsorption capacity predicted by the Langmuir isotherm was ∼400 mgCytoC gadsorbent,dry-1, and the adsorption thermodynamics indicated a physisorption process. Tests were performed to evaluate the co-adsorption in batch, and the composite was effective in adsorbing Cyto C in solution with bovine serum albumin (BSA) and L-phenylalanine. Fixed bed tests were performed, and although protein adsorption onto nanoparticles can be challenging, the Cyto C adsorbed could be successfully recovered after desorption. Overall, the GO-based hydrogel was an effective method for cytochrome C adsorption, exhibiting a notorious potential for applications in protein separation processes.

Sustainable removal of hexavalent chromium using graphene oxide - Iron oxide reinforced pectin/polyvinyl alcohol magnetic gel beads

The study investigated removal of hexavalent chromium Cr (VI) from aqueous solution using graphene oxide‑iron oxide reinforced pectin/polyvinyl alcohol magnetic gel beads prepared through co-precipitation and freeze-drying technique. Scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer, N2 adsorption-desorption isotherm, and zeta potential are used for characterization. The surface area of magnetic gel beads calculated by BET method was determined to be 100.95 m2/g, significantly higher than that of GO and GO-Fe3O4. The optimum removal efficiency of GO-Fe3O4/Pec/PVA was assessed by batch method at variables such as pH(1-6), adsorption time(0-180 min), and temperature(25-35 °C). Accordingly, 0.2 g GO-Fe3O4/Pec/PVA dose, pH 2, contact time: 120 min at 25 °C were found to be the optimal conditions, and maximum adsorption capacity of GO, GO-Fe3O4 and GO-Fe3O4/Pec/PVA toward Cr(VI) removal was found to be 39.5, 62.5 and 78.55 mg g-1, respectively. Kinetic and isotherm studies indicate adsorption data follow pseudo-second-order kinetic and Langmuir isotherm models. Thermodynamic studies showed adsorption capacities of adsorbents decreased when temperature increased which indicated adsorption for Cr (VI) was an exothermic process. The activation energies were found to be 34.92, 26.57, and 35.23 KJ mol-1 for GO, GO-Fe3O4, and GO-Fe3O4/Pec/PVA, respectively, which illustrated adsorption of Cr(VI) onto the surface of adsorbents was a physical process. The beads exhibit excellent recoverability and reusability over five cycles. Overall, GO-Fe3O4/Pec/PVA demonstrates exceptional adsorption properties and can serve as an efficient, stable, less toxic, and magnetically separable adsorbent for removal of Cr(VI) from aqueous solution.

The use of banana peel as a low-cost adsorption material for removing hexavalent chromium from tannery wastewater: optimization, kinetic and isotherm study, and regeneration aspects

When the concentration of hexavalent chromium (Cr(vi)) in the environment is greater than a certain limit, it becomes a global concern. Thus, the aim of this study was to use banana peel as an adsorbent to remove heavy metals, specifically Cr(vi) ions from wastewater. Banana peel (BP) was activated in a furnace for 2 h (h) at 450 °C and 50% humidity. Subsequently, the activated BP was characterized by proximate analysis, elemental analysis, scanning-electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer Emmett Teller (BET) analysis, and thermogravimetric analysis (TGA). According to the characterization results, the activated BP possessed a porous surface and high surface area of 200 m2 g-1, which are important adsorption parameters. Additionally, the removal efficiency for Cr(vi) was evaluated in terms of pH, contact time, initial concentration, and adsorbent dose. Consequently, the optimal operating conditions for removing 94% of Cr(vi) were found to be an adsorption time of 92 min, adsorbent dose of 1.5 g L-1, pH of 3, and initial Cr(vi) concentration of 38 mg L-1. In addition, the adsorption kinetics and isotherms were examined. The pseudo-first-order model with an R2 of 0.996 and the Langmuir isotherm with an R2 of 0.997 were found to be the most effective mathematical representations of the rate and nature of Cr(vi) adsorption on the surface of the activated BP, respectively. Furthermore, it was discovered that the activated BP could be reused six times before its removal efficiency was reduced to less than 70%.

Fluorescent starch-based hydrogel with cellulose nanofibrils and carbon dots for simultaneous adsorption and detection of Pb(II)

The adsorption removal of lead (Pb) ions has become a crucial area of research due to the potential health hazards associated with Pb contamination. Developing cost-effective adsorbents for the removal of Pb(II) ions is significantly important. Hence, a novel fluorescent starch-based hydrogel (FSH) using starch (ST), cellulose nanofibrils (CN), and carbon dots (CD) was fabricated for simultaneous adsorption and detection of Pb(II). A comprehensive characterization of FSH, including its morphological features, chemical composition, and fluorescence characteristics, was conducted. Notably, FSH exhibited a maximum theoretical adsorption capacity of 265.9 mg/g, which was 13.0 times higher than that of pure ST. Moreover, FSH was employed as a fluorescent sensor for Pb(II) determination, achieving a limit of detection (LOD) of 0.06 μg/L. An analysis was further performed to investigate the adsorption and detection mechanisms of Pb(II) utilizing FSH. This study provides valuable insights into the production of a novel cost-effective ST-based adsorbent for the removal of Pb(II) ions.

Recent advances in cellulose- and alginate-based hydrogels for water and wastewater treatment: A review

From the environmental perspective, it is essential to develop cheap, eco-friendly, and highly efficient materials for water and wastewater treatment. In this regard, hydrogels and hydrogel-based composites have been widely employed to mitigate global water pollution as this methodology is simple and free from harmful by-products. Notably, alginate and cellulose, which are natural carbohydrate polymers, have gained great attention for their availability, price competitiveness, excellent biodegradability, biocompatibility, hydrophilicity, and superior physicochemical performance in water treatment. This review outlined the recent progress in developing and applying alginate- and cellulose-based hydrogels to remove various pollutants such as dyes, heavy metals, oils, pharmaceutical contaminants, and pesticides from wastewater streams. This review also highlighted the effects of various physical or chemical methods, such as crosslinking, grafting, the addition of fillers, nanoparticle incorporation, and polymer blending, on the physiochemical and adsorption properties of hydrogels. In addition, this review covered the alginate- and cellulose-based hydrogels' current limitations such as low mechanical performance and poor stability, while presenting strategies to improve the drawbacks of the hydrogels. Lastly, we discussed the prospects and future directions of alginate- and cellulose-based hydrogels. We hope this review provides valuable insights into the efficient preparations and applications of hydrogels.

Reswellable alginate/activated carbon/carboxymethyl cellulose hydrogel beads for ibuprofen adsorption from aqueous solutions

In this study, alginate (Alg) composite beads were prepared by blending with activated carbon (AC) to enhance adsorption capacity for ibuprofen and carboxymethyl cellulose (CMC) to create a reswellable hydrogel. The dried Alg/AC/CMC composite beads could be recovered to sizes and morphologies similar to the initial hydrogel states via a simple reswelling process; however, the dried Alg/AC composite beads without CMC could not be recovered to the initial hydrogel state. Following the reswelling process, the dried Alg/AC/CMC beads demonstrated an 86 % recovery (qe = 34.0 mg/g) in the adsorption capacity for ibuprofen compared to the initial hydrogel beads (qe = 39.6). In contrast, the reswelled Alg/AC beads exhibited only 18 % (qe = 8.6) of the initial adsorption capacity (qe = 48.1). We elucidated the effects of the substitution degree of CMC, AC content, and solution pH on the reswelling property and ibuprofen adsorption capacity of the Alg/AC/CMC composite beads. The adsorption kinetics and isotherms of the prepared composite beads in the hydrogel and reswelled states fit the pseudo-second-order and Langmuir models, respectively. Furthermore, the reswelled Alg composite beads exhibited high adsorption capacity (>93 %) after 10 cycles. Taken together, our findings indicate that the Alg/AC/CMC composite beads can be used as adsorbents without a considerable decrease in adsorption performance by reswelling the beads with distilled water after long-term storage in a dry state.

Lead-imprinted polyvinylidene fluoride membrane for selective removal of lead from contaminated water: material fabrication, filtration application, and mechanism study

The drinking water has become contaminated with lead in many countries across the world. In this study, a novel lead-imprinted polyvinylidene fluoride (PVDF) membrane was successfully fabricated for selective decontamination of lead from water. First of all, the membrane fabrication process was explored and optimized. The physical and chemical properties were then studied for a better understanding of the features of the membrane. The performance of lead removal by the adsorptive membrane was evaluated by systematic batch adsorption experiments, including pH effect, kinetics, isotherm, selectivity, and regeneration studies. The results indicated that the adsorptive membrane showed a high adsorption capacity of 40.59 mg Pb/g at the optimal pH of 5.5, fast kinetics of 2 h, high selectivity towards lead, and outstanding regeneration performance. The Langmuir equation fitted the isotherm better than the Freundlich equation, while the pseudo-second-order model and pore diffusion model well described the kinetics. The adsorptive membrane showed high selectivity towards lead in the lead/zinc binary solution. In the continuous filtration study, a small piece of adsorptive membrane could treat 3.75 L of lead solution. The XPS studies revealed that the lead uptake was mainly due to the complex reaction between lead and carboxyl and hydroxyl in the membrane.

Adsorption of ibuprofen using waste coffee derived carbon architecture: Experimental, kinetic modeling, statistical and bio-inspired optimization

Pharmaceuticals in water are a growing environmental concern, as they can harm aquatic life and human health. To address this issue, an adsorbent made from coffee waste that effectively removes ibuprofen (a common pharmaceutical pollutant) from wastewater was developed. The experimental adsorption phase was planned using a Design of Experiments approach with Box-Behnken strategy. The relation between the ibuprofen removal efficiency and various independent variables, including adsorbent weight (0.01-0.1 g) and pH (3-9), was evaluated via a regression model with 3-level and 4-factors using the Response surface methodology (RSM) . The optimal ibuprofen removal was achieved after 15 min using 0.1 g adsorbent at 32.4 °C and pH = 6.9. Moreover, the process was optimized using two powerful bio-inspired metaheuristics (Bacterial Foraging Optimization and Virus Optimization Algorithm). The adsorption kinetics, equilibrium, and thermodynamics of ibuprofen onto waste coffee-derived activated carbon were modeled at the identified optimal conditions. The Langmuir and Freundlich adsorption isotherms were implemented to investigate adsorption equilibrium, and thermodynamic parameters were also calculated. According to the Langmuir isotherm model, the adsorbent's maximum adsorption capacity was 350.00 mg g-1 at 35 °C. The findings revealed that the ibuprofen adsorption was well-matched with the Freundlich isotherm model, indicating multilayer adsorption on heterogeneous sites. The computed positive enthalpy value showed the endothermic nature of ibuprofen adsorption at the adsorbate interface.

Polymeric hydrogels-based materials for wastewater treatment

Low-cost and reliable wastewater treatment is a relevant issue worldwide to reduce the concentration of environmental pollutants. Industrial effluents containing dyes, heavy metals, and other inorganic and organic compounds can pollute water resources; therefore, novel technologies are required to mitigate and control their release into the environment. Adsorption is one of the simplest methods for treating contaminated water in which a wide spectrum of adsorbents can be used to remove emerging compounds. Hydrogels are interesting materials with high adsorption capacities that can be synthesized via green routes. These adsorbents are promising for large-scale industrial wastewater treatment applications; however, gaps still exist in achieving sustainable commercial implementation. This review focuses on the discussion and analysis of preparation, characterization, and adsorption properties of hydrogels for water purification. The advantages of these polymeric materials for water treatment were analyzed, including their performance in the removal of different organic and inorganic contaminants. Recent advances in the functionalization of hydrogels and the synthesis of novel composites have also been described. The adsorption capacities of hydrogel-based adsorbents are higher than 500 mg/g for different organic and inorganic pollutants, and can reach values of up to >2000 mg/g for organic compounds, significantly outperforming other materials reported for water cleaning. The main interactions involved in the adsorption of water pollutants using hydrogel-based adsorbents were described and explained to allow the interpretation of their removal mechanisms. The current challenges in the implementation of hydrogels for water purification in real-life operations are also highlighted. This review provides an updated picture of hydrogels as interesting materials to address water depollution worldwide.

Efficient removal of Cr from aqueous solution by catechol/m-phenylenediamine nanospheres combined with Fe(II)

The discharge of chromium-containing wastewater in industrial production causes resource loss and damage to the ecological environment. Currently, various phenolamine materials have been used to remove chromium, but their harsh adsorption conditions bring many difficulties. For example, ideal chromium removal is only achieved at low pH. In this study, we synthesized catechol/m-phenylenediamine nanospheres (CMN) and combined CMN with Fe(II) for Cr removal from aqueous solutions, and Fe(II) comes from FeSO4·7H2O. CMN was characterized and analyzed by field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), Fourier transformed infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron (XPS). The adsorption performance was studied through a series of adsorption experiments. When C0 = 900 mg/L and pH = 6, the maximum adsorption capacity obtained in the experiment was 977.1 mg/g. It maintains excellent adsorption properties in acidic, neutral and alkaline environments. The results of the adsorption mechanism showed that the ultra-high adsorption capacity of CMN and Fe(II) for Cr was the result of the synergistic effect of adsorption and reduction, including electrostatic attraction, reduction and coprecipitation. CMN is expected to be an ideal adsorbent for Cr removal in aqueous solution due to its low cost, high biocompatibility and high efficiency in Cr removal.

Green Synthesis of the Effectively Environmentally Safe Metakaolin-Based Geopolymer for the Removal of Hazardous Industrial Wastes Using Two Different Methods

Untreated wastewater pollution causes environmental degradation, health issues, and ecosystem disruption. Geopolymers offer sustainable, eco-friendly alternatives to traditional cement-based materials for wastewater solidification and removal. In this study, we investigate how wastewater containing organic and inorganic pollutants can be removed using geopolymer mixes based on metakaolin incorporation with cement kiln dust as an eco-friendly material. The present investigation compares the efficacy of two different techniques (solidification and adsorption) for reducing dye contaminants and heavy metals from wastewater using a geopolymer based on metakaolin incorporation with cement kiln dust. This study investigated the adsorption capacity of a geopolymer based on metakaolin incorporating two different ratios (20% and 40% by weight) of cement kiln dust (MC1 and MC2) for the reactive black 5 dyeing bath effluent (RBD) only and in a combination of 1200 mg/L of Pb²⁺ and Cd²⁺, each separately, in aqueous solutions under different adsorption parameters. The results of the adsorption technique for the two prepared geopolymer mixes, MC1 and MC2, show that MC1 has a higher adsorption activity than MC2 toward the reactive black 5 dyeing bath effluent both alone and in combination with Pb²⁺ and Cd²⁺ ions separately. The study also looked at using MC1 mix to stabilize and solidify both the dyeing bath effluent alone and its combination with 1200 mg/L of each heavy metal individually inside the geopolymer matrix for different time intervals up to 60 days of water curing at room temperature. The geopolymer matrix formed during the process was analyzed using FTIR, SEM, and XRD techniques to examine the phases of hydration products formed. The results showed that MC1 effectively adsorbs, stabilizes, and solidifies the dying bath effluent for up to 60 days, even with high heavy metal concentrations. On the other hand, geopolymer mixes showed an increase in mechanical properties when hydration time was increased to 60 days. According to our findings, the type of geopolymer developed from metakaolin and 20 wt.% cement kiln dust has the potential to be employed in the treatment of wastewater because it has good adsorption and solidification activity for the reactive black 5 dye effluent alone and for a mixture of dye pollutants with both Pb²⁺ and Cd²⁺ ions separately. Our results have significant implications for wastewater treatment and environmental remediation efforts, as they offer a sustainable solution for managing hazardous waste materials.

The Development of Alginate/Ag NPs/Caffeic Acid Composite Membranes as Adsorbents for Water Purification

Since the water pollution problem still affects the environmental system and human health, the need to develop innovative membranes has become imperious. Lately, researchers have focused on developing novel materials to help diminish the contamination problem. The aim of present research was to obtain innovative adsorbent composite membranes based on a biodegradable polymer, alginate, to remove toxic pollutants. Of all pollutants, lead was chosen due to its high toxicity. The composite membranes were successfully obtained through a direct casting method. The silver nanoparticles (Ag NPs) and caffeic acid (CA) from the composite membranes were kept at low concentrations, which proved enough to bestow antimicrobial activity to the alginate membrane. The obtained composite membranes were characterised by Fourier transform infrared spectroscopy and microscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TG-DSC). Swelling behaviour, lead ion (Pb²⁺) removal capacity, regeneration and reusability were also determined. Further, the antimicrobial activity was tested against selected pathogenic strains (S. aureus, E. faecalis sp., P. aeruginosa, E. coli and C. albicans). The presence of Ag NPs and CA improves the antimicrobial activity of the newly developed membranes. Overall, the composite membranes are suitable for complex water treatment (removal of heavy metal ions and antimicrobial treatment).

A review on hybrid membrane-adsorption systems for intensified water and wastewater treatment: Process configurations, separation targets, and materials applied

In the era of rapid and conspicuous progress of water treatment technologies, combined adsorption and membrane filtration systems have gained great attention as a novel and efficient method for contaminant removal from aqueous phase. Further development of these techniques for water/wastewater treatment applications will be promising for the recovery of water resources as well as reducing the water tension throughout the world. This review introduces the state-of-the-art on the capabilities of the combined adsorption-membrane filtration systems for water and wastewater treatment applications. Technical information including employed materials, superiorities, operational limitations, process sustainability and upgradeing strategies for two general configurations i.e. hybrid (pre-adsorption and post-adsorption) and integrated (film adsorbents, low pressure membrane-adsorption coupling and membrane-adsorption bioreactors) systems has been surveyed and presented. Having a systematic look at the fundamentals of hybridization/integration of the two well-established and efficient separation methods as well as spotlighting the current status and prospectives of the combination strategies, this work will be valuable to all the interested researchers working on design and development of cutting-edge wastewater/water treatment techniques. This review also draws a clear roadmap for either decision making and choosing the best alternative for a specific target in water treatment or making a plan for further enhancement and scale-up of an available strategy.

Facile degradation of chitosan-sodium alginate-chromium (III) gel in relation to leather re-tanning and filling

Natural polysaccharide hydrogel, exemplified by chitosan‑sodium alginate (CS-SA), has been prevailing in adsorption of chromium (III) (Cr(III)) containing contaminant. However, the traditional desorption of CS-SA-Cr(III) to recycle the adsorbent faces the problems including chemical desorbents secondary pollution, resource waste of the terminal CS-SA adsorbents, and tedious work of reusing the desorbed Cr(III). Herein, the adsorption product, CS-SA-Cr(III) gel, was degraded to CS/SA/Cr(III) sol and applied in leather re-tanning and filling processes directly. To achieve this goal, three degradation methods were used to transform the gel to sol. Due to the excellent overall performance of the CS/SA/Cr(III)-HMD₄ sol (obtained by the hydrothermal-mechanical degradation method for 4 h (HMD₄)), including wide size and distribution range, moderate viscosity (54 ± 3.1 mPa·s), high electronegativity (-38.6 ± 5.8 mV), and good stability, the resultant leather after re-tanning and filling by the sol achieved fascinating properties such as good thermal stability (T_s, 116.8 ± 1.8 °C; T_d, 94.2 ± 1.7 °C), mechanical performance (tensile strength, 6.9 ± 0.52 MPa; elongation at break, 95 ± 3.0 %), and superduper thickening rate (31.8 %). Moreover, the mechanism of good re-tanning and filling effects was deciphered. Therefore, this work intends to overcome the limitation of traditional desorption technology and further realizes the high-valued application of the exhausted CS-SA-Cr(III) in leather re-tanning and filling processes.

Synthesis of Graphene Nanoplatelet-Alginate Composite Beads and Removal of Methylene Blue from Aqueous Solutions

The discharge of various types of wastewater into natural streams leads to significant problems by increasing the toxicity of the wastewater. For this reason, methods and materials are being developed by researchers in line with effective, economic, and environmental principles. In this study, the removal of methylene blue, a toxic dyestuff, from aqueous solutions was investigated by synthesizing sodium alginate (SA) and graphene nanoplatelet-sodium alginate composite (SA-GNP) beads. The structural characteristics of the materials were analyzed using FTIR, TGA, optical microscope, and SEM methods. All parameters determining the efficiency of the methylene blue adsorption system were optimized in a batch system. The effects of various factors, such as adsorbent amount, contact time, adsorption temperature, dye concentration, solution pH, pHzpc values of SA and SA-GNP beads, presence of different ions, and beads swelling, on the adsorption process, were investigated. To investigate the mechanism of the adsorption system, the adsorption data were fitted to a non-linear form of the Langmuir, Freundlich, and Temkin equilibrium isotherm models, as well as the Pseudo-first-order (PFO), Pseudo-second-order (PSO), and Bangham kinetic models. High regression coefficients were achieved in the studied kinetic and isotherm models (0.86 ≤ R2 ≤ 0.99), and the experimental data were found to be compatible with the model parameters. Maximum adsorption capacities (qm) of 167.52 mg/g and 290.36 mg/g were obtained for the SA and SA-GNP adsorbents, respectively, at 308 K. The optimum temperature for both adsorption systems was found to be 308 K. The efficiency of methylene blue dyestuff removal was improved with graphene nanoplatelet-based adsorbents.

Synthesis and characterization of hydrogel-based magnetite nanocomposite adsorbents for the potential removal of Acid Orange 10 dye and Cr(VI) ions from aqueous solution

Magnetic responsive hydrogels (CMX-cl-P4VP/M-NPs) were successfully synthesized through in situ co-precipitation procedure and investigated using various techniques. The surface morphology analysis revealed that the M-NPs were uniformly distributed within the hydrogel matrix and had average sizes ranging from 4.98 to 15.02 nm. The graft copolymer containing nanoparticles exhibited a sensitive magnetic response, and their recovery could be facilitated by applying a magnetic field. The purpose of this research is to study the ability of the prepared magnetic hydrogel to remove AO-10 dye and hexavalent chromium ions (Cr(VI)) from the aqueous solution under various factors, namely contact time, pH, amount of adsorbent, coexisting ions and AO-10 and Cr(VI) concentrations. The outcomes of the batch adsorption demonstrated that the adsorbent hydrogel incorporated with a low percentage (10 %) of M-NPs had a strong affinity for the removal of AO-10 dye and Cr(VI) ions at an optimum pH = 3, and the removal percentage reached 99.3 and 97.4 % for 500 mg L^-1 and 300 mg L^-1 of AO-10 dye and Cr(VI) ions within 90, 50 min, respectively. The data were well-fitted by pseudo-first-order kinetics. The maximum adsorption capacities of AO-10 dye and Cr(VI) ions onto adsorbent were 2448 and 574.7 mg g^-1 at 298 K, calculated from the Langmuir model.

Spirulina platensis Immobilized Alginate Beads for Removal of Pb(II) from Aqueous Solutions

Microalgae contain a diversity of functional groups that can be used as environmental adsorbents. Spirulina platensis is a blue-green microalga that comprises protein-N, which is advantageous for use in nitrogen-containing biomass as adsorbents. This study aimed to enhance the adsorption properties of alginate hydrogels by employing Spirulina platensis. Spirulina platensis was immobilized on sodium alginate (S.P@Ca-SA) via crosslinking. The results of field-emission scanning electron microscopy, Fourier-transform infrared, and X-ray photoelectron spectroscopy analyses of the N-containing functional groups indicated that Spirulina platensis was successfully immobilized on the alginate matrix. We evaluated the effects of pH, concentration, and contact time on Pb(II) adsorption by S.P@Ca-SA. The results demonstrated that S.P@Ca-SA could effectively eliminate Pb(II) at pH 5, reaching equilibrium within 6 h, and the maximum Pb(II) sorption capacity of S.P@Ca-SA was 87.9 mg/g. Our results indicated that S.P@Ca-SA fits well with the pseudo-second-order and Freundlich models. Compared with Spirulina platensis and blank alginate beads, S.P@Ca-SA exhibited an enhanced Pb(II) adsorption efficiency. The correlation implies that the amino groups act as adsorption sites facilitating the elimination of Pb(II).

Functionalized maghemite nanoparticles for enhanced adsorption of uranium from simulated wastewater and magnetic harvesting

Maghemite (γ-Fe₂O₃) nanoparticles (MNPs) were functionalized with 3-aminopropyltriethoxysilane (APTES) to give APTES@Fe₂O₃ (AMNP) which was then reacted with diethylenetriamine-pentaacetic acid (DTPA) to give a nanohybrid DTPA-APTES@Fe₂O₃ (DAMNP). Nano-isothermal titration calorimetry shows that DTPA complexation with uranyl ions in water is exothermic and has a stoichiometry of two DTPA to three uranyl ions. Density functional theory calculations indicate the possibility of several complexes between DTPA and UO₂²⁺ with different stoichiometries. Interactions between uranyl ions and DAMNP functional groups are revealed by X-photoelectron and Fourier transform infrared spectroscopies. Spherical aberration-corrected Scanning Transmission Electron Microscopy visualizes uranium on the particle surface. Adsorbent performance metrics were evaluated by batch adsorption studies under different conditions of pH, initial uranium concentration and contact time, and the results expressed in terms of equilibrium adsorption capacities (q_e) and partition coefficients (PC). By either criterion, performance increases from MNP to AMNP to DAMNP, with the maximum uptake at pH 5.5 in all cases: MNP, q_e = 63 mg g^-1, PC = 127 mg g^-1 mM^-1; AMNP, q_e = 165 mg g^-1, PC = 584 mg g^-1 mM^-1; DAMNP, q_e = 249 mg g^-1, PC = 2318 mg g^-1 mM^-1 (at 25 °C; initial U concentration 0.63 mM; 5 mg adsorbent in 10 mL of solution; contact time, 3 h). The pH maximum is related to the predominance of mono- and di-cationic uranium species. Uptake by DAMNPs follows a pseudo-first-order or pseudo-second-order kinetic model and fits a variety of adsorption models. The maximum adsorption capacity for DAMNPs is higher than for other functionalized magnetic nanohybrids. This adsorbent can be regenerated and recycled for at least 10 cycles with less than 10% loss in activity, and shows high selectivity. These findings suggest that DAMNP could be a promising adsorbent for the recovery of uranium from nuclear wastewaters.

Polyvinyl alcohol and sodium alginate hydrogel coating with different crosslinking procedures on a PSf support for fabricating high-flux NF membranes

Polyvinyl alcohol (PVA) and sodium alginate (SA) hydrogel-coated nanofiltration (NF) membranes with high-flux and permselectivity were prepared. The coating of PVA and SA hydrogel selective layer on a porous polysulfone (PSf)/non-woven fabric ultrafiltration substrate membrane was conducted through different three procedures including pre-crosslinking, in-situ crosslinking, and immersing crosslinking and the use of glutaraldehyde as a crosslinking agent. The properties and performances of all types of the prepared membranes were evaluated through ATR-FTIR spectroscopy, AFM, SEM, zeta potential, contact angle, and cross-flow permeation tests. The immersing technique resulted in the formation of TFC membranes with higher hydrophilicity, smoother surface layer, higher negative charge, higher permeation flux, higher salt rejection and better anti-fouling performance. Also, the higher negative surface charge of the immersing coated TFC membranes due to dissociation of hydrophilic functional groups of the PVA and SA hydrogel selective layer resulted in higher As(III) rejection. SA coated NF membrane through immersing method exhibited a higher pure water permeability of 11.2 L m^-2 h^-1 bar^-1, NaCl, MgSO₄, and Na₂SO₄ rejection of 38.2%, 55.1%, and 70.4%, respectively with As(III) rejection of 60.6%. All types of the PVA and SA hydrogel-coated PSf membranes possessed improved fouling resistance to BSA aqueous solution, superior anti-fouling performance was obtained with SA hydrogel coating through immersing method. Such optimum membranes indicated high stability in the long-term experiments. This study showed that the coating of the SA hydrogel layer on a PSf support through immersing method could be a promising candidate for fabricating high-flux NF membranes.

Biosorption of Cr (VI) by acid-modified based-waste fungal biomass from Calocybe indica fruiting bodies production

The world is going through a colossal drinking water scarcity. Unchecked discharge (even at trace levels) of Cr (VI) from industries into water bodies is a serious environmental concern. Here, we report waste fungal biomass (WFB) for the detoxification and removal of chromium ions. Biomass understudy was collected from Calocybe indica fruiting bodies. WFB was used after drying and pretreatment with two distinctive chemical methods, which improved the remediation effectiveness of Cr (VI). Light microscope and Field emission Scanning microscope (FESEM) were employed to elucidate the surface morphology of waste fungal biomass. While Fourier-Transform Infrared-Spectroscopy (FTIR) and Energy Dispersive X-Ray analysis (EDAX) were deployed to explore the mechanism of interaction between Cr (VI) anion and waste fungal biomass. X-ray Photoelectron Spectroscopy (XPS) analyses demonstrated considerable conversion of Cr (VI) into nontoxic Cr (III) species. The most favorable condition for optimum Cr (VI) remediation of 99.66% by treated waste fungal biomass (TWFB) occurred at pH 3, contact time 10 min, adsorbent dosage 3 gL^-1, Cr (VI) concentration 4 mgL^-1, stirring speed 140 rpm, and temperature 320 K, where for untreated waste fungal biomass (UWFB) the optimum of 85% remediation occurred at a contact time 15 min, and adsorbent dosage 2 gL^-1 whereas other experimental conditions remained identical as TWFB biosorbent. Pseudo-second-order kinetics (R² > 0.99) model matched the adsorption rate. And, the Freundlich isotherm model (R² > 0.99) is shown to be a better match for the experimental data. The optimum amount of Cr (VI) adsorbed by the TWFB and UWFB were 205.8 ± 10.1 and 72.85 ± 2.36 mgg^-1, respectively. Thermodynamic parameters revealed that the adsorption was spontaneous (ΔG ˂ 0), endothermic (ΔH > 0), and entropy-driven (ΔS > 0). The generated WFB adsorbent also has significant recycling potential. After five cycles of regeneration and adsorption. It can still keep up good remediation effectiveness of Cr (VI) ions to 85.5.

Innovative progress in graphene derivative-based composite hybrid membranes for the removal of contaminants in wastewater: A review

Graphene derivatives (graphene oxide) are proved as an innovative carbon materials that are getting more attraction in membrane separation technology because of its unique properties and capability to attain layer-to-layer stacking, existence of high oxygen-based functional groups, and generation of nanochannels that successively enhance the selective pollutants removal performance. The review focused on the recent innovations in the development of graphene derivative-based composite hybrid membranes (GDHMs) for the removal of multiple contaminants from wastewater treatment. To design GDHMs, it was observed that at first GO layers undergo chemical treatments with either different polymers, plasma, or sulfonyl. After that, the chemically treated GO layers were decorated with various active functional materials (either with nanoparticles, magnetite, or nanorods, etc.). By preparing GDHMs, properties such as permeability, porosity, hydrophilicity, water flux, stability, feasibility, mechanical strength, regeneration ability, and antifouling tendency were excessively improved as compared to pristine GO membranes. Different types of novel GDHMs were able to remove toxic dyes (77-100%), heavy metals/ions (66-100%), phenols (40-100%), and pharmaceuticals (74-100%) from wastewater with high efficiency. Some of GDHMs were capable to show dual contaminant removal efficacy and antibacterial activity. In this study, it was observed that the most involved mechanisms for pollutants removal are size exclusion, transport, electrostatic interactions, adsorption, and donnan exclusion. In addition to this, interaction mechanism during membrane separation technology has also been elaborated by density functional theory. At last, in this review the discussion related to challenges, limitations, and future outlook for the applications of GDHMs has also been provided.

Bioaerogels, the emerging technology for wastewater treatment: A comprehensive review on synthesis, properties and applications

Over the past decade use of aerogels has received much attention as an emerging technology for wastewater treatment. However, production of aerogels is not environment-friendly. Owing to its excellent properties such as porosity, three-dimensional structure, being amenable to chemical modifications, it is imperative to devise strategies for their improved production and use. Bioaerogels are non-toxic and most of their precursor compounds are biomass-derived. This review aims to present a comprehensive report on survey of existing literature published on the use of bioaerogels for removal of all major categories of water contaminants, namely, heavy metals, industrial dyes, oil, organic compounds and pharmaceuticals. It also gives critical analysis of the lacunae in the existing knowledge such as lack of studies on domestic sewage, emerging pollutants, toxicity of raw materials and adequate disposal of used adsorbents. Proposals of overcoming the limitations in the applicability of bioaerogels, like combining constructed wetlands with use of bioaerogels, among others have been discussed. In this review, emphasis has been given on production of bioaerogels, with an aim to underscore the potential of valorization of biomass waste to develop novel materials for wastewater treatment in an effort towards creating a circular and green economy.

Carbon-based nanocomposite materials with multifunctional attributes for environmental remediation of emerging pollutants

Carbon-based materials are among the most biosynthesized nanocomposites with excellent tunability and multifunctionality features, that other materials fail to demonstrate. Naturally occurring materials, such as alginate (Alg), can be combined and modified by linking the active moieties of various carbon-based materials of interest, such as graphene oxide (GO), carbon nanotubes (CNTs), and mesoporous silica nanocomposite (MSN), among others. Thus, several types of robust nanocomposites have been fabricated and deployed for environmental remediation of emerging pollutants, such as pharmaceutical compounds, toxic dyes, and other environmentally hazardous contaminants of emerging concern. Considering the above critiques and added features of carbon-based nanocomposites, herein, an effort has been made to spotlight the synergies of GO, CNTs, and MSN with Alg and their role in mitigating emerging pollutants. From the information presented in this work, it can be concluded that Alg is a material that has excellent potential. However, its use still requires further tests in different areas and other materials to carry out a holistic investigation that exploits its versatility for environmental remediation purposes.

Pb (II) Recovery by Modified Tuffite: Adsorption, Desorption, and Kinetic Study

In this study, Pb (II) removal from wastewater was investigated using a modified vitric crystal tuffite with a BET surface area of 11.7 m2/g. For this purpose, tuffite was used in its natural and modified form with ethylenediaminetetraacetic acid (EDTA). Batch adsorption experiment was performed. The effects of contact time (0–90 min), adsorbent dosage (1–10 g/L), initial concentration (10–200 mg/L), and pH (2–12) on the removal of Pb (II) were investigated. The isotherm data were fitted to Langmuir, Freundlich, Temkin, and Redlich-Peterson isotherm models. Kinetic models such as pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were used. In order to optimize the adsorption system and investigate the kinetic behaviour of adsorption, nonlinear isotherm and kinetic models were used as well as linearized models. Error analyses were made in order to express the obtained results more accurately. pH 5 was the optimum value for adsorption. According to nonlinear isotherm model calculations, Bayburt stone (BS) and its modified form (MBS) had $q_{\max }$ values of 335 and 584 mg/g, respectively. The Freundlich model, with its high correlation coefficients of about 1.00, was found to be more suitable for the adsorption of Pb (II) to MBS. The pseudo-second-order kinetic model with mean $R^2$ and $k_2$ values of 0.997 and 0.0116 1/min, respectively, was found to be more appropriate. According to the regeneration studies, the maximum desorption efficiency was 97.8%. The thermodynamic equilibrium coefficients obtained at different temperatures and $\Delta G^{\text{o}}$ , $\Delta H^{\text{o}}$ , and $\Delta S^{\text{o}}$ values were observed as -21.4, 46.4, and 163 kJ/mol, respectively. These values indicate that the adsorption of Pb (II) on to MBS was endothermic and spontaneous process. BS and MBS were characterized by different instrumental analyses such as SEM, EDS, FTIR, and zeta potential measurements.

A post-functional Ti-based MOFs composite for selective removal of Pb (II) from water

Lead ions in water have notorious effects on humans and environment. It is important to design an adsorbent with high adsorption capacity and reproducibility for efficiently removing Pb (II)ions from polluted water. Here, a novel Ti-based MOFs material (BDB-MIL-125(Ti)@Fe₃O₄) was prepared by modifying NH₂-MIL-125(Ti) with sulfhydryl and amino groups. Due to the large number of active sites, the maximum Pb (II) adsorption capacity of BDB-MIL-125(Ti)@Fe₃O₄ was 710.79 mg/g at 25 °C and pH = 6 within 120 min corresponding to a maximum removal rate of 95.68%. The adsorbent also has extremely high selectivity and good cycling adsorption performance. The adsorption isotherms and kinetics agree with the Langmuir and the pseudo-second-order models, indicating that the process was chemisorption. Thermodynamic studies prove that spontaneous processes enhance Pb (II) adsorption at higher temperatures. DFT and FMOs calculations were used to discuss the adsorption mechanism. The sulfhydryl groups on the surface of organic ligands have a stronger affinity for Pb (II).

Enhanced adsorptive removal of Cr(III) from the complex solution by NTA-modified magnetic mesoporous microspheres

The Fe₃O₄@nSiO₂@mSiO₂/NTA (FNMs-NTA) was prepared by grafting magnetic mesoporous microspheres with nitrilotriacetic acid (NTA) and applied as an adsorbent for the removal of Cr(III) from complex solutions. Some characterization techniques including Brunauer-Emmett-Teller (BET), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD), small-angle X-ray diffraction (SAXS), vibrating sample magnetometer (VSM), and thermal gravimetric analysis (TGA) were used to characterize functional groups and pore structure of FNMs-NTA, which proved that NTA was successfully decorated onto the magnetic Fe₃O₄@nSiO₂@mSiO₂ (FNMs) and FNMs-NTA featured a regular mesoporous structure. The batch adsorption of Cr(III) by FNMs-NTA exhibited high adsorption capacity (16.0 mg·g^-1 at pH 3.0, and 25 °C). Adsorption data followed Freundlich isotherm and adsorption process was a spontaneous adsorption process. Moreover, the kinetics of adsorption were well explained by pseudo-second-order kinetic model. FNMs-NTA showed resistance to interfering inorganic cations (Na⁺, Ca²⁺) and complexing agents (EDTA). Furthermore, FNMs-NTA exhibited remarkable regeneration performance and easy separation under external magnetic field. X-ray photoelectron spectroscopy (XPS) analysis showed the FNMs-NTA had excellent adsorption ability for Cr(III) because of the ion exchange and surface complexation.

Accumulation of chromium in plants and its repercussion in animals and humans

The untreated effluents released from industrial operations have adverse impacts on human health, environment and socio-economic aspects. Environmental pollution due to chromium is adversely affecting our natural resources and ecosystem. Chromium is hazardous carcinogenic element released from spontaneous activities and industrial procedures. Chromium toxicity, mobility and bioavailability depend mainly on its speciation. Chromium mainly exists in two forms, first as an immobile, less soluble trivalent chromium [Cr(III)] species under reducing conditions whereas hexavalent chromium [Cr(VI)] as a mobile, toxic and bioavailable species under oxidizing conditions. Hexavalent chromium is more pernicious in comparison to trivalent form. Chromium negatively affects crop growth, total yield and grain quality. Exposure of chromium even at low concentration enhances its accretion in cells of human-beings and animals which may show detrimental health effects. Many techniques have been utilized for the elimination of chromium. The selection of the green and cost-efficient technology for treatment of industrial effluent is an arduous task. The present review highlights the problems associated with chromium pollution and need of its immediate elimination by suitable remediation strategies. Further, investigations are required to fill the gaps to overcome the problem of chromium contamination and implementation of sustainable remediation strategies with their real-time applicability on the contaminated sites.

Yeast β-glucan with different degrees of oxidation: Capability of adsorbing lead ions and protective effect against lead-induced PC12 cytotoxicity

This study investigated the adsorption behavior of Pb²⁺ by three different oxidized yeast β-glucans (OYG) and their effect on lead-induced PC12 cytotoxicity. The analysis revealed that the adsorption kinetics conformed to pseudo-first-order model and the adsorption capacities for Pb²⁺ (36.50, 41.61 and 50.31 μg/mg for OYG1-3) showed a positive correlation with oxidation degree (15.2%, 47.3% and 71.2% for OYG1-3). Additionally, the lead adsorption by OYGs showed an endothermic process and the adsorption capacity increased with the increasing Pb²⁺ concentration in the aqueous phase. Then, it was found that OYGs were biocompatible and could increase cell viability from 60% to 80% during lead stress. Nuclear staining revealed an inhibitory effect of OYGs on cell apoptosis, with the best performance for OYG3. Furthermore, OYGs could significantly suppress lead-induced production of reactive oxygen species (ROS) and nitric oxide (NO) in PC12 cells. Specifically, when being supplemented with 20 μg/mL OYG3, the increase of fluorescence intensity caused by the production of ROS and NO in PC12 cells were significantly alleviated from 2.65 and 2.6 to 1.23 and 1.35-fold, respectively. Our findings indicate that OYGs could adsorb lead effectively and protect PC12 cells from lead-induced cytotoxicity.

Synthesis and application of graphene oxide as a nanoadsorbent to remove Cd (II) and Pb (II) from water: adsorption equilibrium, kinetics, and regeneration

In this work, graphene oxide (GO) was synthesized by the modified Hummers method. The nanomaterial was characterized by FTIR and Raman spectroscopy, SEM, and pH at the point of zero charge. GO exhibited typical characteristics of graphene-based materials, indicating that graphite oxidation and exfoliation occurred successfully. Cd (II) and Pb (II) adsorption onto GO was carried out in batch systems, in which the effect of adsorbent dosage, contact time, and initial adsorbate concentration were evaluated. Langmuir, Freundlich, and Sips isotherm models, as well as pseudo order models and Elovich kinetic equation were applied to adsorption experimental data. Results indicated that increasing adsorbent mass, the removal efficiency of Cd (II) and Pb (II) increased. Freundlich isotherm better described Pb (II) adsorption (R² = 0.96), while Cd (II) isotherm showed linear behavior. From the Akaike's AIC parameter, kinetic data were satisfactorily described by pseudo-first order (Cd (II)) and pseudo-n order (Pb (II)) models. GO was successfully subjected to five regeneration cycles, maintaining high efficiency (> 90%) in all cycles. GO showed high potential for the adsorption of Cd (II) and Pb (II) from aqueous solution, due to its high adsorption capacity, rapid Cd (II) and Pb (II) intakes, and great regeneration performance.