Adsorption behavior of hexavalent chromium in aqueous solution by polyvinylimidazole modified cellulose

Cross-Linked Polyvinylimidazole Complexed with Heteropolyacid Clusters for Deep Oxidative Desulfurization

The combustion of fuel with high sulfur concentrations produces a large number of sulfur oxides (SOx), which have a range of negative effects on human health and life. The preparation of catalysts with excellent performance in the oxidative desulfurization (ODS) process is highly effective for reducing SOx production. In this paper, cross-linked polyvinylimidazole (VE) was successfully created using a simple ontology aggregation method, after which a catalyst of polyvinylimidazolyl heteropolyacid clusters (VE-HPA) was prepared by adding heteropolyacid clusters. Polyvinylimidazolyl-phosphotungstic acid (VE-HPW) showed an outstanding desulfurization performance, and the desulfurization efficiency reached 99.68% in 60 min at 50 °C with H2O2 as an oxidant. Additionally, the catalyst exhibited recyclability nine consecutive times and remained stable, with a removal rate of 98.60%. The reaction mechanism was eventually proposed with the assistance of the free radical capture experiment and GC-MS analysis.

Enhancement of Mass Transfer Process for Photocatalytic Reduction in Cr(VI) by Electric Field Assistance

The removal of Cr(VI), a highly-toxic heavy metal, from industrial wastewater is a critical issue in water treatment research. Photocatalysis, a promising technology to solve the Cr(VI) pollution problem, requires urgent and continuous improvement to enhance its performance. To address this need, an electric field-assisted photocatalytic system (PCS) was proposed to meet the growing demand for industrial wastewater treatment. Firstly, we selected PAF-54, a nitrogen-rich porous organic polymer, as the PCS's catalytic material. PAF-54 exhibits a large adsorption capacity (189 mg/g) for Cr(VI) oxyanions through hydrogen bonding and electrostatic interaction. It was then coated on carbon paper (CP) and used as the photocatalytic electrode. The synergy between capacitive deionization (CDI) and photocatalysis significantly promotes the photoreduction of Cr(VI). The photocatalytic performance was enhanced due to the electric field's influence on the mass transfer process, which could strengthen the enrichment of Cr(VI) oxyanions and the repulsion of Cr(III) cations on the surface of PAF-54/CP electrode. In addition, the PCS system demonstrates excellent recyclability and stability, making it a promising candidate for chromium wastewater treatment.

Modification of cellulosic adsorbent via iron-based metal phenolic networks coating for efficient removal of chromium ion

Surface modification of durian rind cellulose (DCell) was done by utilizing the strong coordination effect of polyphenol-based metal phenolic networks (MPNs). MPNs from Fe(III)-tannic acid (FTN) and Fe(III)-gallic acid (FGN) were coated on DCell via a self-assembly reaction at pH 8, resulting in adsorbent composites of FTN@DCell and FGN@DCell for removal of Cr(VI). Batch adsorption experiments revealed that FTN coating resulted in an adsorbent composite with higher adsorption capacity than FGN coating, owing to the greater number of additional adsorption sites from phenolic hydroxyl groups of tannic acid. FTN@DCell exhibits an equilibrium adsorption capacity at 30°C of 110.9 mg/g for Cr(VI), significantly higher than FGN@DCell (73.63 mg/g); the adsorption capacity was increased at higher temperature (i.e., 155.8 and 116.8 mg/g at 50°C for FTN@DCell and FGN@DCell, respectively). Effects of pH, adsorbent dose, initial concentration, and coexisting ions on Cr(VI) removal were investigated. The kinetics fractal-based model Brouers-Sotolongo indicates the 1st and 2nd order reaction for Cr(VI) adsorption on FTN@DCell and FGN@DCell, respectively. The isotherm data can be described with a fractal-based model, which implies the heterogeneous nature of the adsorbent surface sites. The Cr(VI) adsorption via surface complexation with phenolic hydroxyl groups was confirmed by evaluating the functional groups shifting. FGN@DCell and FTN@DCell were found to have good reusability, maintaining over 50 % of their adsorption efficiency after four adsorption-desorption cycles. Environmental assessment with Arabidopsis thaliana demonstrated their potential in eliminating the Cr(VI) phytotoxic effect. Thus, this study has shown the efficient and economical conversion of durian waste into environmentally benign adsorbent for heavy metal treatment.

Composite hydrogels formed from okara cellulose nanofibers and carrageenan: Fabrication and characterization

Currently, there is great interest in converting edible agro-waste, such as okara from soybean production, into value-added products. For this study, we focus on fabricating composite hydrogels from okara cellulose nanofibers (CNFs) and carrageenan (CA). We also examined the effects of TEMPO oxidation of the okara CNFs, as well as CA concentration, on the microstructure and physicochemical properties of the composite hydrogels. The water holding capacity, oil holding capacity, surface tension, gel strength, and viscoelasticity of the composite microgels increased with increasing CA concentration, and it was found that the highest values were obtained for TC-CA2 hydrogel: contact angle = 43.6° and surface tension = 45.12 mN/m, which was attributed to the formation of a more regular and dense three-dimensional gel network. All the CNF-CA microgels had highly anionic ζ-potential values (-38.8 to -50.1 mV), with the magnitude of the negative charge increasing with TEMPO oxidation and carrageenan concentration. These results suggest there would be strong electrostatic repulsion between the composite hydrogels. The composite microgels produced in our work may be useful functional materials for utilization within the food industry, thereby converting a waste product into a valuable commodity.

Selective recovery of Re(VII) by nucleobases functionalized cellulose microspheres from the simulated uranium ore leaching solution

From a practical standpoint, it is still challenging to develop adsorbents with high adsorption capacity and outstanding selectivity for rhenium in uranium ore leaching solution. In this study, in order to explore the structure-property relationship, four nucleobases (Adenine, Guanine, Hypoxanthine and Xanthine) were used as functionalization reagents to modify cellulose (MCC-g-GMA-A, MCC-g-GMA-G, MCC-g-GMA-H and MCC-g-GMA-X) via radiation method. The effect of the type of nucleobases on the adsorption performance was evaluated by batch and dynamic experiments. The order of maximum adsorption capacity was MCC-g-GMA-A (194.0 mg g-1) > MCC-g-GMA-G (123.4 mg g-1) > MCC-g-GMA-H (45.59 mg g-1) > MCC-g-GMA-X (23.43 mg g-1), which was associated with the category of nitrogen-functional groups. Different nitrogen-containing functional groups have different degrees of protonation, which leads to differences in the interaction of the adsorbent with Re(VII). Notably, the adsorbents were able to selectively capture trace Re(VII) from the simulated uranium ore leaching solution. The FT-IR, XPS analyses, DFT theoretical calculations exhibited that the adsorption mechanism of nucleobases functionalized cellulose microspheres and Re(VII) was electrostatic interaction. MCC-g-GMA-A and MCC-g-GMA-G exhibited excellent selectivity towards Re(VII), which are potential adsorbents for Re(VII) recovery in uranium ore leaching solutions.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Selective Removal of Hexavalent Chromium by Novel Nitrogen and Sulfur Containing Cellulose Composite: Role of Counter Anions

Exploiting an adsorbent with superb selectivity is of utmost importance for the remediation of Cr (VI)-laden wastewater. In this work, a novel nitrogen and sulfur functionalized 3D macroporous cellulose material (MPS) was prepared by homogeneous cross-link cellulose and polyvinylimidazole, followed by ion exchange with MoS₄^2-. MPS exhibited high removal efficiency at a broad pH range (1.0-8.0) and large adsorption capacity (379.78 mg/g) toward Cr (VI). Particularly, outstanding selectivity with an enormous partition coefficient (1.01 × 10⁷ mL/g) was achieved on MPS. Replacing MoS₄^2- with Cl^- and MoO₄^2- led to a sharp decline in adsorption selectivity, demonstrating that MoS₄^2- contributed substantially to the selectivity. Results of FTIR, XPS, and apparent kinetic analysis revealed that Cr (VI) was first pre-enriched on the MPS surface via electrostatic and dispersion forces, and then reacted with MoS₄^2- to generate Cr (III), which deposited on MPS by forming Cr(OH)₃ and chromium(III) sulfide. This study provides a new idea for designing adsorbents with a superior selectivity for removing Cr (VI) from sewage.

Hexavalent Chromium Removal from Industrial Wastewater by Adsorption and Reduction onto Cationic Cellulose Nanocrystals

Cationic cellulose nanocrystals (CCNC) are lignocellulosic bio-nanomaterials that present large, specific areas rich with active surface cationic groups. This study shows the adsorption removal of hexavalent chromium (Cr(VI)) from industrial wastewaters by the CCNC. The CCNC were synthetized through periodate oxidation and Girard's reagent-T cationization. The high value of CCNCs cationic groups and anionic demand reveal probable nanocrystal-Cr(VI) attraction. Adsorption was performed with synthetic Cr(VI) water at different pH, dosage, Cr(VI) concentration and temperature. Fast removal of Cr(VI) was found while operating at pH 3 and 100 mg·L^-1 of dosage. Nevertheless, a first slower complete removal of chromium was achieved by a lower CCNC dosage (40 mg·L^-1). Cr(VI) was fully converted by CCNC into less-toxic trivalent species, kept mainly attached to the material surface. The maximum adsorption capacity was 44 mg·g^-1. Two mechanisms were found for low chromium concentrations (Pseudo-first and pseudo-second kinetic models and continuous growth multi-step intraparticle) and for high concentrations (Elovich model and sequential fast growth-plateau-slow growth intraparticle steps). The Sips model was the best-fitting isotherm. Isotherm thermodynamic analysis indicated a dominant physical sorption. The Arrhenius equation revealed an activation energy between physical and chemical adsorption. CCNC application at selected conditions in industrial wastewater achieved a legal discharge limit of 40 min.

Scavenging of hexavalent chromium from aqueous solution by Macadamia nutshell biomass modified with diethylenetriamine and maleic anhydride

Based on the premise that aqueous anions of hexavalent chromium (Cr(VI)) are capable of electrostatic interaction with cationic and polar active sites, acid-washed Madacamia nutshell biomass was sequentially treated with diethylenetriamine (DETA) and maleic anhydride (MA) to graft poly(diethylenetriamine-co-maleic anhydride). By displaying a new peak at 1685 cm^-1 ascribed to amide CO stretching vibrations, Fourier transform infrared spectroscopy highlighted the formation of amide groups through reaction of DETA with carboxyl groups on the biomass surface. Scanning electron microscopic images of the MA-modified biomass displayed polymeric growths attributed to copolymerization of DETA with MA. The polar and ionizable amide and amine groups of the grafted copolymer endowed the adsorbent with Cr(VI) removal capabilities over a wide pH range demonstrated by removal efficiencies between 70.9% and 81.7% in the pH 1.6 to pH 10.0 range for the treatment of 20 mL solutions containing 100 mg L^-1 Cr(VI) with 200 mg of adsorbent. Conformity of the adsorption isotherm data to the Freundlich model revealed the heterogeneous nature of the adsorbent surface, which comprised a variety of functional groups capable of interaction with Cr(VI) species in solution. The Sips isotherm model provided the best fit to the equilibrium experimental data, and the adsorption capacity was 779.1 mg g^-1 at pH 1.6, room temperature and an adsorbent dosage of 5.0 g L^-1. The findings indicate that Cr(VI) adsorption onto diethylenetriamine and maleic anhydride modified Madacamia nutshell biomass is a promising option for Cr(VI) removal from aqueous solutions.

Highly efficient Cr(VI) remediation by cationic functionalized nanocellulose beads

Applications of nanocellulose as a water treatment material are being actively pursued based on its interesting properties, such as renewability, large specific surface area, hydrophilic surface chemistry, and biodegradability. This study used carboxymethyl cellulose nanofibrils (CMCNFs) to prepare a typical bead-type adsorbent with improved structural stability as an actual water treatment restoration material. In addition, a cationized nanocellulose adsorbent was prepared by introducing polyethyleneimine (PEI) on the surface of the CMCNF (P/CMCNF), the removal efficiency of Cr(VI) was evaluated, and its mechanism was elucidated. As a result, the P/CMCNF beads showed an excellent Cr(VI) removal capacity of 1302.3 mg/g, the best result among cellulose-based adsorption materials. Cr(VI) was effectively removed by electrostatic attractions combined with chemical reduction and chelation mechanisms. Furthermore, the macrobead fabrication and PEI surface modification process improved the underwater stability of the P/CMCNF, and it showed excellent reuse efficiency.

iTRAQ-based quantitative proteomic reveals proteomic changes in Serratia sp. CM01 and mechanism of Cr(Ⅵ) resistance

OBJECTIVE

Serratia sp. CM01 is a wild strain with the resistance and reduction ability of chromium(Ⅵ). The aim of this study it to investigate the underlying mechanisms of the Cr(Ⅵ) tolerance and reduction of strain CM01, and to explore its response to environmental pollution pressure at the molecular level.

METHODS

The iTRAQ technique was utilized to investigate the differentially expressed protein patterns related to the Cr(Ⅵ)-resistance in wild-type strain CM01 and domesticated CM01. RT-qPCR was used to verify the expression levels of several functional genes. The cell surface hydrophobicity and autoaggregation, the intracellular glucose content, and the total superoxide dismutase (SOD) activity were determined.

RESULTS

In total, 2750 proteins were detected and identified in WT CM01 and domesticated CM01. Compared with WT CM01, the iTRAQ results of 646 proteins were found to be significantly differentially expressed in domesticated CM01. There were 343 up-regulated and 303 down-regulated proteins, which mainly related to carbohydrate metabolism, stress responses, amino acid metabolism and some other systems. RT-qPCR results showed that the expression level of seven genes in domesticated CM01 were consistent with the iTRAQ proteomic profiles. The cell surface hydrophobicity, self-aggregation, intracellular glucose content and total SOD activity of domesticated CM01 with Cr(Ⅵ) treatment were significantly higher than without Cr(Ⅵ) treatment.

CONCLUSION

Domesticated CM01 displayed a complex biological network to exhibit the tolerance of Cr(Ⅵ), which may be attributed to the following aspects: (a) CM01 reduced the consumption of glucose by inhibiting the metabolism of carbohydrates, which was an energy-saving survival mode. (b) The inositol phosphate metabolism pathway played an important role. (c) Oxidative stress proteins enhanced the adaptability. (d) CM01 enhanced biosynthesis of hydrophobic amino acids to resistance to Cr(Ⅵ). (e) Several key systems and proteins, such as UvrABC system, Lon protease, porin OmpC, also may play an important role.

Synthesis of calcium-aluminum-layered double hydroxide and a polypyrrole decorated product for efficient removal of high concentrations of aqueous hexavalent chromium

To efficiently remove high concentrations of hexavalent chromium (Cr(VI)), calcium-aluminum-layered double hydroxide (CaAl-LDH, denoted as CAL), and polypyrrole-modified CAL (CAL-PPy) were prepared by hydrothermal and in situ polymerization methods, respectively. The chemical structure, morphology, and elemental results indicated that the chain-like polypyrrole was decorated with hexagonal CAL. The specific surface area of CAL-PPy increased from 8.746 m²/g to 24.24 m²/g. The adsorption performances of CAL and CAL-PPy for aqueous Cr(VI) were investigated using batch equilibrium experiments. The decontamination process of aqueous Cr(VI) (100 mg/L) reached the equilibrium state within 50 min, and the kinetic data met the pseudo-second-order kinetic equation. The Langmuir model described the isothermal data properly, and the obtained theoretical adsorption capacity of CAL for Cr(VI) at 318 K was 34.06 mg/g, while that of CAL-PPy was 66.14 mg/g. The removal mechanisms involved electrostatic attraction, surface complexation, anion exchange, and reduction to low-toxicity Cr(III). Therefore, CAL and CAL-PPy have underlying applications in treating real wastewater containing Cr(VI).

Biosorption of Cr(VI) using coconut fibers from agro-industrial waste magnetized using magnetite nanoparticles

Herein, the biosorption of Cr(VI) by magnetized coconut fibres obtained from agricultural waste has been described. Magnetization was achieved by incorporating magnetite nanoparticles into the fibres by a coprecipitation reaction in alkaline media. The biosorption capacity of the fibres was evaluated by two series of experiments. In the first series, 500 mg L^-1 of the biosorbent was added to a 50 mg L^-1 K₂Cr₂O₇ solution at 28 °C and stirred at 200 rpm and the pH was varied from 1 to 13 to determine the optimum pH value. The second series of experiments evaluated the sorption capacity of the fibres at the optimum pH, under the same agitation speed and temperature but with an adsorbate concentration of 100 mg L^-1. The biosorbents were characterized using Fourier transform-infrared spectroscopy, inductively coupled plasma-atomic emission spectroscopy, scanning electron microscopy, dispersive X-ray fluorescence, and X-ray powder diffraction. The biosorption experiments demonstrated that the magnetization process increased the biosorption capacity of the material. Optimum biosorption occurred at pH 2, and at optimal conditions, the best adsorptive efficiency exceeded 90%, reaching a biosorption capacity of 87.38 mg g^-1 for the magnetized fibre and 23.87 mg g^-1 for the natural fibre, with an equilibrium time of less than 20 min.

Insight into the adsorption of Cr(vi) on functionalized carboxymethyl cellulose-based sponge via experimental and theoretical calculations

PEI–PAM–CM with a sponge-like structure can effectively remove Cr(vi) at low concentration by electrostatic attraction and chemical binding.

Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption: a review

Abstract

Chromium is widely used in industry, and improper disposal of wastewater and industrial residues containing excessive chromium can contaminate water and soil, endangering both environmental and human health. Natural biopolymers and their derivatives have been investigated for removal of chromium (Cr) from wastewater. Cellulose, lignin, tannin, chitin, chitosan, and polypeptides are abundant in nature, and have high potential as adsorbents due to their easy access, low cost, and the recyclability of the captured heavy metals. In order to improve their mechanical strength, recyclability, specific surface area, binding site number, and adsorption rate as adsorbents, native materials have also been modified. This review discusses the source of chromium contamination and the main species of interest, as well as their toxicity. The structures of the aforementioned biopolymers were analyzed, and the adsorption mechanism of chromium and the main influencing factors on this process are discussed. The modification methods of various adsorbents and their adsorption effects on chromium are also detailed, and the developmental direction of research on the use of biopolymer adsorption remediation to control chromium contamination is discussed.

Graphical abstract