Modification of cellulosic adsorbent via iron-based metal phenolic networks coating for efficient removal of chromium ion

Surface modification of durian rind cellulose (DCell) was done by utilizing the strong coordination effect of polyphenol-based metal phenolic networks (MPNs). MPNs from Fe(III)-tannic acid (FTN) and Fe(III)-gallic acid (FGN) were coated on DCell via a self-assembly reaction at pH 8, resulting in adsorbent composites of FTN@DCell and FGN@DCell for removal of Cr(VI). Batch adsorption experiments revealed that FTN coating resulted in an adsorbent composite with higher adsorption capacity than FGN coating, owing to the greater number of additional adsorption sites from phenolic hydroxyl groups of tannic acid. FTN@DCell exhibits an equilibrium adsorption capacity at 30°C of 110.9 mg/g for Cr(VI), significantly higher than FGN@DCell (73.63 mg/g); the adsorption capacity was increased at higher temperature (i.e., 155.8 and 116.8 mg/g at 50°C for FTN@DCell and FGN@DCell, respectively). Effects of pH, adsorbent dose, initial concentration, and coexisting ions on Cr(VI) removal were investigated. The kinetics fractal-based model Brouers-Sotolongo indicates the 1st and 2nd order reaction for Cr(VI) adsorption on FTN@DCell and FGN@DCell, respectively. The isotherm data can be described with a fractal-based model, which implies the heterogeneous nature of the adsorbent surface sites. The Cr(VI) adsorption via surface complexation with phenolic hydroxyl groups was confirmed by evaluating the functional groups shifting. FGN@DCell and FTN@DCell were found to have good reusability, maintaining over 50 % of their adsorption efficiency after four adsorption-desorption cycles. Environmental assessment with Arabidopsis thaliana demonstrated their potential in eliminating the Cr(VI) phytotoxic effect. Thus, this study has shown the efficient and economical conversion of durian waste into environmentally benign adsorbent for heavy metal treatment.

Enhanced exopolysaccharide production of Cordyceps militaris via mycelial cell immobilization on plastic composite support in repeated-batch fermentation

Repeated-batch fermentation with fungal mycelia immobilized in plastic composite support (PCS) eliminates the lag phase during fermentation and improves metabolite productivity. The strategy is implemented herein, and a novel modified PCS is developed to enhance exopolysaccharide (EPS) production from the medicinal fungus Cordyceps militaris. A modified PCS (SYE + PCS) was made by compositing polypropylene (PP) with a nutrient mixture containing soybean hull, peptone, yeast extract, and minerals (SYE+). The use of SYE + PCS has consistent cell productivity throughout the multiple fermentation cycles, which resulted in a more higher cell productivity after second batch compared to unmodified PCS. The cell grown on SYE + PCS also generates a higher yield of EPS (3.36, 6.93, and 5.72 g/L in the first, second, and third fermentation cycles, respectively) up to three-fold higher than the cell immobilized on unmodified PCS. It is also worth noting that the EPS from mycelium grown on SYE + PCS contains up to 2.3-fold higher cordycepin than those on unmodified PCS. The presence of nutrients in SYE + PCS also affects the hydrophobicity and surface roughness of the PC, improving mycelial cell adhesion. This study also provides a preliminary antioxidant activity assessment of EPS from immobilized C. militaris grown with SYE + PCS.

Preparation of MIL100/MIL101-alginate composite beads for selective phosphate removal from aqueous solution

Numerous studies have reported various approaches for synthesizing phosphate-capturing adsorbents to mitigate eutrophication. Despite the efforts, concerns about production cost, the complexity of synthesis steps, environmental friendliness, and applicability in industrial settings continue to be a problem. Herein, phosphate-selective composite adsorbents were prepared by incorporating alginate (Alg) with MIL100 and MIL101 to produce the MIL100/Alg and MIL101/Alg beads, where Fe³⁺ served as the crosslinker. The unsaturated coordination bond of MIL100 and MIL101 serves as a Lewis acid that can attract phosphate. The adsorption equilibrium isotherm, uptake kinetics, and effects of operating parameters were studied. The phosphate adsorption capacity of MIL100/Alg (103.3 mg P/g) and MIL101/Alg (109.5 mg P/g) outperformed their constituting components at pH 6 and 30 °C. Detailed evaluation of the adsorbent porosity using N₂ sorption reveals the formation of mesoporous structures on the Alg network upon incorporation of MIL100 and MIL101. The composite adsorbents have excellent selectivity toward anionic phosphate and can be easily regenerated. Phosphate adsorption by MIL100/Alg and MIL101/Alg was driven by electrostatic attraction and ligand exchange. Preliminary economic analysis on the synthesis of the adsorbents indicates that the composites, MIL100/Alg and MIL101/Alg, are economically viable adsorbents.

Biocompatible and biodegradable copper-protocatechuic metal-organic frameworks as rifampicin carrier

Tuberculosis (TB) is a disease caused by the M. tuberculosis bacteria infection and is listed as one of the deadliest diseases to date. Despite the development of antituberculosis drugs, the need for long-term drug consumption and low patient commitment are obstacles to the success of TB treatment. A continuous drug delivery system that has a long-term effect is needed to reduce routine drug consumption intervals, suppress infection, and prevent the emergence of drug-resistant strains of M. tuberculosis. For this reason, biomolecule metal-organic framework (BioMOF) with good biocompatibility, nontoxicity, bioactivity, and high stability are becoming potential drug carriers. This study used a bioactive protocatechuic acid (PCA) as organic linker to prepare copper-based BioMOF Cu-PCA under base-modulated conditions. Detailed crystal analysis by the powder X-ray diffraction demonstrated that the Cu-PCA, with a chemical formula of C₁₄H₁₆O₁₃Cu₃, crystalizes as triclinic in space group P1. Comprehensive physicochemical characterizations were provided using FTIR, SEM, XPS, TGA, EA, and N₂ sorption. As a drug carrier, Cu-PCA showed a high maximum rifampicin (RIF) drug loading of 443.01 mg/g. Upon resuspension in PBS, the RIF and linkers release profile exhibited two-stage release kinetic profiles, which are well described by the Biphasic Dose Response (BiDoseResp) model. A complete release of these compounds (RIF and PCA) was achieved after ~9 h of mixing in PBS. Cu-PCA and RIF@Cu-PCA possessed antibacterial activity against Escherichia coli, and good biocompatibility is evidenced by the high viability of MH-S mice alveolar macrophage cells upon supplementations.

Facile synthesis of superparamagnetic thiamine/Fe3O4 with enhanced adsorptivity toward divalent copper ions

The development of environmentally friendly adsorbents has been extensively carried out to overcome the detrimental effects of heavy metal accumulation, which has persistently become a global ecological problem. In pursuit of generating eco-friendly adsorbents, a green method for synthesizing thiamine functionalized-Fe₃O₄ (FT) was developed in this study. A one-step chemical oxidation and functionalization technique was used to prepare FT using the ammonia-containing solvent. A molar ratio of ammonia:Fe:thiamine of 15:1:1 was shown to produce FT15 with high yield, adsorptivity, and purity. XRD, XPS, FTIR, SEM, and SQUID characterization of FT15 revealed the formation of superparamagnetic thiamine functionalized Fe₃O₄ in their particles. This superparamagneticity facilitates the easy recovery of FT15 particles from the waste-containing solution by using an external magnetic force. The batch adsorption of Cu(II) onto FT15 showed the best fit with the Sips adsorption isotherm model with a maximum adsorption capacity of 426.076 mg g^-1, which is 5.69-fold higher capacity than the control unmodified Fe₃O₄ (F15). After five adsorption-desorption cycles, the FT15 can maintain up to 1.95-fold higher capacity than the freshly synthesized F15. Observation on the physicochemical properties of the post-adsorption materials showed the contribution of an amine group, pyrimidine ring, and the thiazolium group of thiamine in boosting its adsorption capacity. This study provides important findings to advance the adsorptivity of magnetic adsorbents with promising recoverability from aqueous solution by employing naturally available and environmentally friendly compounds such as thiamine.

TiO2/guar gum hydrogel composite for adsorption and photodegradation of methylene blue

The development of porous adsorbent materials from renewable resources for water and wastewater treatment has received considerable interest from academia and industry. This work aims to synthesize composite hydrogel from the combination of guar gum (a neutral galactomannan polysaccharide) and TiO₂. The TiO₂-embedded guar gum hydrogel (TiO₂@GGH) was utilized to remove methylene blue through adsorption and photodegradation. The presence of TiO₂ particles in the hydrogel matrix (TiO₂@GGH) was confirmed by scanning electron microscopy-energy dispersive X-ray and X-ray photoelectron spectroscopy analysis. The mercury intrusion and N₂ sorption isotherm indicate the macroporous structure of the TiO₂@GGH composite, showing the presence of pore sizes ~420 μm. The dye removal efficiency of the GGH and TiO₂@GGH was evaluated in batch mode at ambient temperature under varying pH. The effect of UV radiation on the dye removal efficiency was also assessed. The results demonstrated that the highest dye removal was recorded at pH 10, with the equilibrium condition achieved within 5 h. UV radiation was shown to enhance dye removal. The maximum adsorption capacity of TiO₂@GGH is 198.61 mg g^-1, while GGH sorbent is 188.53 mg g^-1. The results imply that UV radiation gives rise to the photodegradation effect.

Studies on the performance of bentonite and its composite as phosphate adsorbent and phosphate supplementation for plant

Organo-bentonite (OrB) was prepared by modifying bentonite with chitosan, and natural surfactant extracted from Sapindus rarak fruit. The physical alteration post-modification, performance of phosphates (Pi) adsorption, and possibility as a Pi-supplementation for plants of OrB were assessed and compared to acid-activated bentonite (AAB). The physical alteration due to modification of bentonite was characterized. SEM images were not indicating significant morphology differences between OrB and AAB. Existence of chitosan layers in OrB causes a decrease in basal spacing as characterized using XRD. The BET surface area of OrB was decreased compared to AAB due to pore coverage by chitosan. Adsorption studies reveal that OrB has a higher adsorption capacity towards Pi than AAB, which is 97.608 and 131.685 mg/g at 323 K for AAB and OrB, respectively. The H-shape isotherm curve indicates that chemisorption is dominantly controlling the adsorption. The isotherm and kinetics adsorption were well fitted to Langmuir and Pseudo-second order models, respectively. Performance of AAB and OrB as Pi-supplementation was assessed based on growth phenotypes of Arabidopsis thaliana; seedlings show that supplementation of Pi@AAB and Pi@OrB (at half doses) can promote primary root extension. These results also demonstrate the safety of direct disposal of the materials into the soil.

Aqueous synthesis of highly adsorptive copper-gallic acid metal-organic framework

A greener route to synthesize mesoporous copper-gallic acid metal-organic framework (CuGA MOF) than the conventional method using harmful DMF solvent was proposed in this study. Various synthesis attempts were conducted by modifying the synthesis conditions to produce CuGA MOF with comparable physical properties to a reference material (DMF-synthesized CuGA NMOF). The independent variables investigated include the molar ratio of NaOH to GA (1.1 to 4.4) and the synthesis temperature (30, 60, 90 °C). It was found that proper NaOH addition was crucial for suppressing the generation of copper oxide while maximizing the formation of CuGA MOF. On the other hand, the reaction temperature mainly affected the stability and adsorption potential of CuGA MOF. Reacting Cu, GA, and NaOH at a molar ratio of 1:1:2.2 and a temperature of 90 °C, produced mesoporous MOF (CuGA 90-2.2) with a surface area of 198.22 m2/g, a pore diameter of 8.6 nm, and a thermal stability of 219 °C. This MOF exhibited an excellent adsorption capacity for the removal of methylene blue (124.64 mg/g) and congo red (344.54 mg/g). The potential usage of CuGA 90-2.2 as a reusable adsorbent was demonstrated by its high adsorption efficiency (> 90%) after 5 adsorption-desorption cycles.

Transesterification of activated sludge in subcritical solvent mixture

Most previous studies reported in literature on biodiesel production from sludge were performed by acid catalyzed transesterification that required long reaction time (about 24h) and high methanol loading. The objective of this study was to investigate the in situ transesterification of sludge in subcritical mixture of methanol and acetic acid. At 250°C and a solvent (85% methanol and 15% acetic acid) to sludge ratio of 5 (mLg(-1)), a FAME yield of 30.11% can be achieved in 30min, compared to the yield of 35% obtained by the acid-catalyzed (4% H2SO4) transesterification which required 24h at 55°C and a methanol to sludge ratio of 25 (mLg(-1)). The method developed in this study avoided using mineral acid, significantly reduced reaction time and methanol loading to achieve comparable FAME yield.

Catalyst free production of partial glycerides: acetone as solvent

Acetone as solvent glycerolysis of oil and simultaneous production of solketal. Reactor loading and quality of stirring are important factors for efficient glycerolysis.