Preparation and characterization of antibacterial poly(lactic acid) nanocomposites with N-halamine modified silica

Tough and antibacterial poly(l-lactic acid) composites prepared via blending with the bifunctional macromolecular ionomer

In order to expand the application of PLLA in the packaging field, improving its toughness and antibacterial activity has been widely concerned. However, seldom researches can simultaneously efficiently improve the toughness and antibacterial activity of PLLA by adding one kind of additions. To address above problems, the bifunctional branched poly(butylene adipate) ionomer additive (b-PBAUi) was synthesized. For b-PBAUi, its branched structure not only increased the plasticizing effect of additive, but also acted as reaction sites to introduce more antibacterial ionic salt. Due to the special structure of b-PBAUi, PLLA/b-PBAUi blends achieved excellent toughness and antibacterial efficiency. The elongation of blend reached 125 % even by adding 5 wt% b-PBAUi, which was 10 times higher than that of PLLA. From the analysis of phase morphology, it could be found that the microvoids promoting tensile yielding was the main tensile toughening mechanism for PLLA/b-PBAUi blends. In addition, the antibacterial activity of PLLA was significantly improved by adding b-PBAUi. For PLLA/b-PBAUi10 and PLLA/b-PBAUi15, the antibacterial efficiency against E. coli and S. aureus bacteria exceeded 99.0 %. By comprehensive consideration, the optimal blend ratio was achieved by PLLA/b-PBAUi10 due to its excellent toughness and antibacterial efficiency.

Effect of a Self-Assembled Nucleating Agent on the Crystallization Behavior and Spherulitic Morphology of Poly(lactic acid)

Herein, decanedioic acid dibenzoylhydrazide (DDBH) was used as a nucleating agent to improve the crystallization of poly(lactic acid) (PLA). The formation of DDBH assemblies in PLA melts at different concentrations was systematically investigated. The DDBH (0.5-0.9 wt %) recrystallized as dendrite-like structures during the isothermal crystallization process, and the crystal morphology of PLA underwent a morphological change from spherical form to a similar dendritic crystal form. Differential scanning calorimetry and in situ wide-angle X-ray diffraction analysis results showed that crystallizability and overall crystallization rate of PLA were enhanced by the addition of DDBH. The half-crystallization time at 120 °C reduced to 0.28 min compared to pure PLA (6.12 min), after adding 0.9 wt % DDBH. Moreover, the crystallinity and lamellar thickness of crystalline PLA increased, while the size of the microcrystal of PLA decreased with an increase in DDBH content. The heat deflection temperatures of PLA/DDBH blends increased and hence heat resistance improved.

Effect of Nano-Silica and Sorbitol on the Properties of Chitosan-Based Composite Films

Chitosan and its derivatives are widely used in food packaging, pharmaceutical, biotechnology, medical, textile, paper, agriculture, and environmental industries. However, the flexibility of chitosan films is extremely poor, which limits its relevant applications to a large extent. In this paper, chitosan/sorbitol/nano-silica (CS/sorbitol/SiO2) composite films were prepared by the casting film method using chitosan, sorbitol, Tween-80 and nano-SiO2 as raw materials. The structure of the films was characterized by infrared spectroscopy, electron scanning microscopy, and X-ray diffraction analysis. The effects of sorbitol and nano-silica dosage on the mechanical properties, thermal properties and water vapor barrier properties of the composite film were investigated. The results show that with the gradual increase in sorbitol (≤75 wt %), the elongation at the break of chitosan/sorbitol films significantly increased. When the addition of sorbitol was 75 wt %, the elongation at break of the chitosan/sorbitol composite film was 13 times higher than that of the chitosan film. Moreover, nano-SiO2 can further improve the mechanical properties and thermal stability of the chitosan/sorbitol composite films. When the amount of nano-silica was 4.5 wt %, the composite film became more flexible, with a maximum elongation of 90.8% (which is 14 times that of chitosan film), and its toughness increased to 10.52 MJm-3 (which is 6 times that of chitosan film). This study balances the tensile strength and elongation at break of the composite films by adding a plasticizer and nano-filler, providing a reference for the preparation of chitosan composites or their blending with other polymers, and has practical guiding significance for the industrial production of biomass plastics.

Effect of Styrene-Maleic Anhydride Copolymer on Properties of PBST/PLA Blends

Poly(butylene succinate-butylene terephthalate) (PBST) and polylactic acid (PLA) are both biodegradable polymeric materials. PBST has good ductility but low strength, while PLA exhibits high strength but poor toughness. Based on the complementary mechanical properties of the two polymers, PBST/PLA blends were prepared by melt blending in the mixing chamber of a torque rheometer using styrene-maleic anhydride copolymer (PSMA) as a compatibilizer. The effects of different contents of PSMA on the crystalline properties, thermal properties, mechanical properties, rheological behavior, and morphology of PBST/PLA blends were investigated. The results showed that the addition of PSMA improved the compatibility between PBST and PLA. When the amount of PSMA is 3-4 wt%, the comprehensive mechanical properties of the blends are optimal, and the tensile strength was increased by 61.7% compared with the binary blend without PSMA. Additionally, rheological tests illustrated that the blends exhibited a typical shear-thinning behavior and belonged to pseudoplastic non-Newtonian fluids.

Electrospinning of PLA Nanofibers: Recent Advances and Its Potential Application for Food Packaging

Poly(lactic acid), also abbreviated as PLA, is a promising biopolymer for food packaging owing to its environmental-friendly characteristic and desirable physical properties. Electrospinning technology makes the production of PLA-based nanomaterials available with expected structures and enhanced barrier, mechanical, and thermal properties; especially, the facile process produces a high encapsulation efficiency and controlled release of bioactive agents for the purpose of extending the shelf life and promoting the quality of foodstuffs. In this study, different types of electrospinning techniques used for the preparation of PLA-based nanofibers are summarized, and the enhanced properties of which are also described. Moreover, its application in active and intelligent packaging materials by introducing different components into nanofibers is highlighted. In all, the review establishes the promising prospects of PLA-based nanocomposites for food packaging application.

Development of multifunctional highly-efficient bio-based fire-retardant poly(lactic acid) composites for simultaneously improving thermal, crystallization and fire safety properties

Currently, it is still a huge challenge to prepare high performance eco-friendly poly(lactic acid) (PLA) with high thermal stability, good processability, excellent crystallization behavior, good transparency and highly-efficient fire safety. In this paper, a novel bio-based nucleation agent N-(furan-2-ylmethyl)-P,P-diphenylphosphinic amide (FPPA) was prepared and used for the fabrication of fire safety PLA/FPPA composites. The chemical structure of FPPA was measured by FTIR, NMR and MS. Further, the crystallization behavior, thermal stability, fire safety and mechanical properties of PLA/FPPA composites were performed by TGA, DSC, polarization microscope, LOI, UL94, cone calorimeter, DMA and, SEM, Raman, GC-MS, and TGA-FTIR. The results showed that the multifunctional FPPA not only had a high thermal stability and was a good nucleation agent for PLA. Moreover, only loading of 3 wt% FPPA increased the LOI of PLA from 19.0 to 33.8 % with UL-94 V-0 classification. Furthermore, the heat release rate and total heat release values of PLA/3%FPPA composite reduced by 6.3 % and 15.3 % in cone-calorimeter test. Such high fire safety was mainly attributed to specific fire safety radicals due to thermal degradation of FPPA to interrupt composites burning in gas phase. Besides, transparency and mechanical properties were almost not changed because of low loading of FPPA in PLA. This multifunctional bio-based fire-retardant for PLA with good comprehensive performance promises broad application in engineering electronics, automobiles, 3D printing and construction materials.

A Review on Synthesis, Properties, and Applications of Polylactic Acid/Silica Composites

Polylactic acid (PLA)/silica composites as multifunctional high-performance materials have been extensively examined in the past few years by virtue of their outstanding properties relative to neat PLA. The fabrication methods, such as melt-mixing, sol–gel, and in situ polymerization, as well as the surface functionalization of silica, used to improve the dispersion of silica in the polymer matrix are outlined. The rheological, thermal, mechanical, and biodegradation properties of PLA/silica nanocomposites are highlighted. The potential applications arising from the addition of silica nanoparticles into the PLA matrix are also described. Finally, we believe that a better understanding of the role of silica additive with current improvement strategies in the dispersion of this additive in the polymer matrix is the key for successful utilization of PLA/silica nanocomposites and to maximize their fit with industrial applications needs.

Dressing Blood-Contacting Materials by a Stable Hydrogel Coating with Embedded Antimicrobial Peptides for Robust Antibacterial and Antithrombus Properties

Although dressing blood-contacting devices with robust and synergistic antibacterial and antithrombus properties has been explored for several decades, it still remains a great challenge. In order to endow materials with remarkable antibacterial and antithrombus abilities, a stable and antifouling hydrogel coating was developed via surface-initiated polymerization of sulfobetaine methacrylate and acrylic acid on a polymeric substrate followed by embedding of antimicrobial peptides (AMPs), including WR (sequence: WRWRWR-NH₂) or Bac2A (sequence: RLARIVVIRVAR-NH₂) AMPs. The chemical composition of the AMP-embedded hydrogel coating was determined through XPS, zeta potential, and SEM-EDS measurements. The AMP-embedded antifouling hydrogel coating showed not only good hemocompatibility but also excellent bactericidal and antiadhesion properties against Gram-positive and Gram-negative bacteria. Moreover, the hydrogel coating could protect the AMPs with long-term bioactivity and cover the positive charge of the dotted distributed AMPs, which in turn well retained the hemocompatibility and antifouling capacity of the bulk hydrogels. Furthermore, the microbiological results of animal experiments also verified the anti-infection performance in vivo. Histological and immunological data further indicated that the hydrogel coating had an excellent anti-inflammatory function. Therefore, the present study might provide a promising approach to prevent bacterial infections and thrombosis in clinical applications of blood-contacting devices and related implants.

Antimicrobial Properties of Food Nanopackaging: A New Focus on Foodborne Pathogens

Food products contaminated by foodborne pathogens (bacteria, parasites, and viruses) cause foodborne diseases. Today, great efforts are being allocated to the development of novel and effective agents against food pathogenic microorganisms. These efforts even might have a possible future effect in coronavirus disease 2019 (COVID-19) pandemic. Nanotechnology introduces a novel food packaging technology that creates and uses nanomaterials with novel physiochemical and antimicrobial properties. It could utilize preservatives and antimicrobials to extend the food shelf life within the package. Utilizing the antimicrobial nanomaterials into food packaging compounds typically involves incorporation of antimicrobial inorganic nanoparticles such as metals [Silver (Ag), Copper (Cu), Gold (Au)], and metal oxides [Titanium dioxide (TiO2), Silicon oxide (SiO2), Zinc oxide (ZnO)]. Alternatively, intelligent food packaging has been explored for recognition of spoilage and pathogenic microorganisms. This review paper focused on antimicrobial aspects of nanopackaging and presented an overview of antibacterial properties of inorganic nanoparticles. This article also provides information on food safety during COVID-19 pandemic.

Crystallization, Mechanical, and Antimicrobial Properties of Diallyl Cyanuric Derivative-Grafted Polypropylene

A functional N-halamine precursor with double bonds, 1-3-diallyl-s-triazine-2,4,6-trione (DTT), was synthesized and grafted onto polypropylene using dicumyl peroxide (DCP) as an initiator via melt blending at 200 °C. The DTT content grafted onto the polypropylene (PP) backbone was depended on both DTT and DCP concentrations in feed. The crystallization temperature of PP increased from 116 °C (neat PP) to 123 °C (10% DTT) with the increasing DTT content. Meanwhile, the crystallization rate and relative crystallinity of PP were significantly increased after introduction of the N-halamine precursor. Moreover, the incorporation of DTT had partial compensation for the decreasing mechanical properties of polypropylene, which resulted from degradation. When the amount of added DTT reached up to 5%, the chlorinated DTT-modified PP sheets were able to kill 105-6 cfu/mL Escherichia coli (CMCC 44103) and Staphylococcus aureus (ATCC 6538) within 10 min. The DTT-modified PP with the regenerating antibacterial property may have great potential for application in packaging, filters, and hygienic products.

Performance and multi-scale investigation on the phase miscibility of poly(lactic acid)/amided silica nanocomposites

In this work, amino-functionalized nano-SiO₂ (m@g-SiO₂) was synthesized through coupling reaction on the surface of nano-SiO₂. Moreover, the optimum preparation conditions of m@g-SiO₂ were selected via orthogonal experiments as follows: reaction temperature of 80 °C, reaction time of 8 h, the mass ratio of stearic acid, N,N'‑carbonyldiimidazole, imidazole hydrochloride and g-SiO₂ of 0.5:0.7:0.7:1. Fourier transform infrared spectroscopy, static angle measurement and X-ray photoelectron spectroscopy unanimously confirmed the formation of m@g-SiO₂. Furthermore, poly(lactic acid)(PLA)/m@g-SiO₂ nanocomposites was prepared with m@g-SiO₂ as fillers to improve the comprehensive performance of PLA. Then, the mechanical properties and crystallization behavior of PLA/m@g-SiO₂ nanocomposites were studied, which showed that the impact strength and elongation-at-break of PLA/m@g-SiO₂ (0.3 wt%) nanocomposites were increased by 78.05% and 1148%, respectively, and its crystallinity was increased by 26.46%. Simultaneously, thermal gravimetric analysis indicated that the thermal stability of PLA/m@g-SiO₂ nanocomposites was improved. Eventually, the multi-scale investigation on the phase miscibility of PLA/m@g-SiO₂ nanocomposites was probed by rheological behaviors analysis and the molecular dynamics simulations, which confirmed that surface modification of SiO₂ greatly enhanced the interaction energy and miscibility between the filler and PLA bulk.

Highly Antibacterial Efficacy of a Cotton Fabric Treated with Piperazinyl Schiff Base

Due to the structure of hierarchical aligned cellulose fibrils, cotton fabric used in clothing possesses excellent moisture and thermal managements. Such structure yet may retain metabolic excrements and sebum secretions discharged from the human skin, which reproduce microorganisms harmful for human health. However, incorporating the antimicrobial coating into the cotton fabric can sufficiently resist the microorganism growth. In this work, a water-soluble antibacterial coating named N-(4-(allyloxy) benzylidene)-2-(piperazin-1-yl) ethanamine (NABPE) was synthesized to produce a rechargeable and fast sterilization cotton fiber fabric (M-cotton/NABPE). M-cotton/NABPE exhibited a high effective antibacterial activity, and the inhibition ratios against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were 94 % and 93 %, respectively. Chlorination was performed with sodium hypochlorite solution to form N-Cl bond on the M-cotton/NABPE fabrics, resulting in a high biocidal efficacy of up to 100 % via contact killing for a duration of 5 min. After 25 washing cycles, the antibacterial fabric still maintained an antibacterial rate of 91.95 % and 92.15 % against E. coli and S. aureus, respectively. Furthermore, the fabrics showed integrated properties of excellent UV stability, long-term stability, robust rechargeable biocidal activity (chlorine recharging >5000 ppm) and washing durability. This research provides fundamental insights into the synthesis of the NABPE and prolonged biocidal efficacy of the M-cotton/NABPE, and thereby pave a pathway to incorporate an economic and environmental-friendly antibacterial coating suitable for finishing cotton fabric.

Contact/Release Coordinated Antibacterial Cotton Fabrics Coated with N-Halamine and Cationic Antibacterial Agent for Durable Bacteria-Killing Application

Coating a cationic antibacterial layer on the surface of cotton fabric is an effective strategy to provide it with excellent antibacterial properties and to protect humans from bacterial cross-infection. However, washing with anionic detergent will inactivate the cationic antibacterial coating. Although this problem can be solved by increasing the amount of cationic antibacterial coating, excessive cationic antibacterial coating reduces the drapability of cotton fabric and affects the comfort of wearing it. In this study, a coordinated antibacterial coating strategy based on quaternary ammonium salt and a halogenated amine compound was designed. The results show that the antibacterial effect of the modified cotton fabric was significantly improved. In addition, after mechanically washing the fabric 50 times in the presence of anionic detergent, the antibacterial effect against Staphylococcus aureus and Escherichia coli was still more than 95%. Furthermore, the softness of the obtained cotton fabric showed little change compared with the untreated cotton fabric. This easy-to-implement and cost-effective approach, combined with the cationic contact and the release effect of antibacterial agents, can endow cotton textiles with durable antibacterial properties and excellent wearability.