Preparation of a porous graphene oxide/alkali lignin aerogel composite and its adsorption properties for methylene blue

Lignin: A valuable and promising bio-based absorbent for dye removal applications

The importance of environmental issues and the existence of humans have led to the recognition of environmental concerns as the main risk to modern life. Notably, one major concern for protecting and managing the environment and human health is the presence of dyes in wastewater. Therefore, before discharging wastewater into mainstream water, it is crucial to remove dyes. Among all lignocellulosic materials, lignin is a highly fragrant biopolymer. Its abundant availability, complex structure, and numerous functional moieties, including hydroxyl, carboxyl, and phenolic, are used in different chemicals and applications. Based on this, lignin is a very useful green material for adsorption, specifically in removing both heavy metals and organic pollutants from wastewater. This article describes the use of lignin-based adsorbents as a recent breakthrough in the removal of dye from aqueous solutions. On the other hand, the review intends to encourage readers to study both established and novel avenues in lignin-based dye removal materials.

One stone, two birds: An eco-friendly aerogel based on waste pomelo peel cellulose for the efficient adsorption of dyes and heavy metal ions

To achieve the objective of "waste control by waste", in this study, a green aerogel adsorbent comprised of pomelo-peel cellulose and sodium alginate (PCC/SA) was prepared through dual-network crosslinking. The resulting 3D hierarchical porous structured PCC/SA aerogel exhibited good structural stability, and kept the morphological integrity during 10 days in a wide pH range (2-10), suggesting its potential for recycling in diverse complex environments. Besides, the superior adsorption capacities for methylene blue (MB) and Cu(II) were observed, with the qm values and adsorption equilibrium times were recorded to be 1299.59 mg/g (300 min) and 287.55 mg/g (120 min), correspondingly. Furthermore, the favorable reusability of the PCC/SA aerogel was also demonstrated, with the removal efficiency for MB remaining almost unchanged (about 94 %) after 10 adsorption-desorption cycles, while there was a slight reduction for Cu(II) from 85.28 % to 72.47 %. XPS and FTIR analysis revealed that electrostatic attraction, hydrogen bonding, cation exchange and coordination were the major adsorption mechanisms. Importantly, the PCC/SA aerogel can be naturally degraded in soil within 10 weeks. Therefore, the as-prepared aerogel bead derived from pomelo peel shows great promise as an adsorbent for wastewater treatment containing dye and heavy metal ions.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Polyethylene glycol crosslinked modified chitosan/halloysite nanotube composite aerogel microspheres for efficient adsorption of melanoidin

Melanoidins are widely present in molasses wastewater and are dark-colored macromolecules that are hazardous to the environment. Currently, adsorption methods can effectively remove melanoidins from wastewater. However, existing adsorbents have shown unsatisfactory removal efficiency for melanoidins, making practical application challenging. Polyethylene glycol crosslinked modified chitosan/halloysite nanotube composite aerogel microspheres (PCAM@HNTs) were developed as a highly efficient adsorbent for melanoidins. The removal rate of PCAM@HNTs for melanoidins was 98.53 % at adsorbent dosage 0.4 mg/mL, pH 7, temperature 303 K and 450 mg/L initial melanoidins concentration, and the corresponding equilibrium adsorption capacity was 1108.49 mg/g. The analysis results indicate that the adsorption of melanoidins by PCAM@HNTs is a spontaneous and endothermic process. It fits well with pseudo-second-order kinetic models and the Freundlich isotherm equation. The adsorption of PCAM@HNT on melanoidins is primarily attributed to electrostatic and hydrogen bonding interactions. Furthermore, PCAM@HNTs exhibit excellent biocompatibility and are nonhazardous. Therefore, PCAM@HNTs proved to be an ideal adsorbent for the decolorization of molasses wastewater.

Porous lignin-based composites for oil/water separation: A review

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way.

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Lignosulfonate/polyaniline (LS/PANI) nanocomposite adsorbent materials were prepared by the chemical polymerization of lignosulfonate with an aniline monomer as a dopant and structure-directing agent, and the adsorption behavior of dyes as well as heavy metal ions was investigated. LS/PANI composites were used as dye adsorbents for the removal of different cationic dyes (malachite green, methylene blue, and crystal violet). The adsorption behavior of LS/PANI composites as dye adsorbents for malachite green was investigated by examining the effects of the adsorbent dosage, solution pH, initial concentration of dye, adsorption time, and temperature on the adsorption properties of this dye. The following conclusions were obtained. The optimum adsorption conditions for the removal of malachite green dye when LS/PANI composites were used as malachite green dye adsorbents were as follows: an adsorbent dosage of 20 mg, an initial concentration of the dye of 250 mg/L, an adsorption time of 300 min, and a temperature of 358 K. The LS/PANI composite adsorbed malachite green dye in accordance with the Langmuir adsorption model and pseudo-second-order kinetic model, which belongs to chemisorption-based monomolecular adsorption, and the equilibrium adsorption amount was 245.75 mg/g. In particular, the adsorption of heavy metal ion Pb2+ was investigated, and the removal performance was also favorable for Pb2+.

Preparation of DES lignin-chitosan aerogel and its adsorption performance for dyes, catechin and epicatechin

Herein, DES lignin was obtained by pretreatment of grapevine with a deep eutectic solvent (ChCl-LA). A novel chitosan-DES lignin composite aerogel material (CS-LIG aerogel) was prepared to adsorb methylene blue (MB), Congo red (CR), catechin (C), and epicatechin (EC). The CS-LIG aerogel was systematically characterized by modern technological instruments. It was demonstrated that the DES lignin was successfully incorporated and had an important effect on the morphological structure and adsorption of dyes and natural products in the aerogel. The adsorption kinetic models for both adsorbed CR and MB are pseudo-second-order models. Adsorption isotherms followed Langmuir for the adsorption of CR and Freundlich for the adsorption of MB. The π-π interaction and hydrogen bonding of DES lignin aromatic groups in CS-LIG aerogels were responsible for the adsorption of C and EC with 86.42 % and 90.85 % removal rates, respectively. This study opens a new avenue for the high-value utilization of DES lignin and the preparation of chitosan-based composites for the adsorption of dyes and purification of natural products.

3D porous N-doped lignosulfonate/graphene oxide aerogel for efficient solar steam generation and desalination

Solar-driven interfacial evaporation has been considered one of the most promising approaches to tackle the issue of water scarcity. The salt resistance and water transport capacity of solar evaporation materials are essential to evaluate desalination performance. Herein, a 3D-porous N-doped lignosulfonate/graphene oxide (GO) aerogel (NLGA) was facilely prepared by a one-step hydrothermal method. By introducing ethylenediamine (EDA) as a nitrogen source, the wettability and water transport capacity of the aerogel were enhanced; by introducing lignosulfonate (LS), its porous structure was regulated, and its light absorption capability was significantly improved. The obtained aerogel exhibited an outstanding evaporation rate (1.57 kg m^-2 h^-1) and efficiency (95.2 %) under 1 sun illumination, which is significantly better than some reported foam-based solar evaporators. In addition, NLGA maintained a stable evaporation rate over long-term cyclic evaporation without visible salt accumulation on the surface. The good salt rejection performance is due to the rich-pore structure and superhydrophilicity of NGLA, which provides sufficient water supply to dissolve the salts during water evaporation. NLGA has enormous potential as a solar evaporator based on its excellent performance in solar vapor generation.

Lignin microparticles-reinforced cellulose filter paper for simultaneous removal of emulsified oils and dyes

The presence of multiple pollutants in wastewater, often with complex interactions, poses a significant challenge for conventional membranes to effectively remove multiple pollutants simultaneously. Herein, a lignin microparticles-reinforced cellulose filter paper (FP@AL-LS-DA) was fabricated via an aldol condensation between lignin and cellulose filter paper and cross-linking with dopamine hydrochloride (DA), which showed desired rejection of oil-in-water emulsions and dyes. Characterizations revealed that the addition of lignin and DA effectively narrowed the pore size (from 4.45 μm to 2.01 μm) and enhanced the rigidity and stability of the cellulose filter paper, thus making it not easily damaged in the water environment and showing excellent tolerance to strong acid and high-salt environments. The oil-in-water emulsions removal efficiency was higher than 99 % even after ten times usage, and the oil flux was kept stable at 52.54 L·m^-2·h^-1, indicating that FP@AL-LS-DA had outstanding reusability and stability. Remarkably, FP@AL-LS-DA showed excellent removal efficiency (>99 %) for complex pollutants containing dyes and oil-in-water emulsions. In this work, we demonstrate a lignin microparticles-reinforced cellulose filter paper that is simple to prepare and can efficiently separate oil-in-water emulsions and remove dyes.

Bimetallic MOFs loaded cellulose as an environment friendly bioadsorbent for highly efficient tetracycline removal

Due to the increasingly serious antibiotic-related pollution, it is crucial to develop novel green bioadsorbents to effectively remove antibiotics from aqueous solutions. In this study, Fe doped zeolitic imidazolate frameworks-8 loaded cellulose (Fe/ZIF-8@cellulose) aerogels were prepared. The synthesized Fe/ZIF-8@cellulose aerogels were characterized experimentally including morphology observation and chemical compositions determination. The effects of bioadsorbent dosage, solution pH, adsorption time, initial TC concentration and adsorption temperature on the TC adsorption behaviors were systematically studied. Due to the introduction of Fe in the ZIF-8, the maximum adsorption capacity of Fe/ZIF-8@cellulose for TC could reach as high as 1359.2 mg/g, which is higher than the reported ZIF-8 loaded polysaccharide based adsorbents. The adsorption kinetics and isotherm of TC adsorption were also determined. With the cellulose as the matrix to load Fe/ZIF-8, the obtained Fe/ZIF-8@cellulose aerogels exhibited good reusability. Most importantly, the TC adsorption mechanism was proposed. The results of our finding suggest that the Fe doping into MOFs is an effective strategy to improve the antibiotics adsorption performance and the application of cellulose as the matrix is a valuable method to increase the cyclic utilization. This study highlights the potentials of applying the Fe/ZIF-8@cellulose aerogels in the antibiotics removal for practical wastewater.

Lignin nanoparticles-reduced graphene oxide based hydrogel: A novel strategy for environmental applications

In this work, facile fabrication of lignin nanoparticles (L_NP)-based three-dimensional reduced graphene oxide hydrogel (rGO@L_NP) has been demonstrated as a novel strategy for environmental applications. Herein, L_NP were facilely synthesized from walnut shell waste through a direct chemical route. These L_NP were incorporated into the continuous porous network of rGO network to fabricate rGO@L_NP hydrogel. Characterization studies were carried out using various analytical techniques viz. scanning electron microscopy, Fourier transform IR spectroscopy, X-ray diffraction and thermogravimetric analysis. The efficiency of rGO@L_NP hydrogel as adsorptive platform was evaluated by employing methylene blue and Pb²⁺ as model pollutants, whilst the effect of various experimental parameters was ascertained for optimal performance. Furthermore, Agar well diffusion method was used to check the antibacterial activities of the hydrogel using two bacterial pathogenic strains, i.e. Klebsiella pneumoniae (gram negative) and Enterococcus faecalis (gram positive). Results showed that after the inclusion of L_NP into rGO hydrogel, there was a marked improvement in pollutant's uptake ability and compared to bare L_NP and rGO, the composite hydrogel showed enhanced bactericidal effect. Overall, this approach is outstanding because of the synergy of functional properties of nano-lignin and rGO due to multi-interaction sites in the resulting hydrogel. The results presented herein support the application of rGO@L_NP as innovative water filter material for scavenging broad spectrum pollutants and bactericidal properties.

Conversion of foliar residues of Sansevieria trifasciata into adsorbents: dye adsorption in continuous and discontinuous systems

The study analyzed the potential of leaf powder prepared from the residual leaves of the species Sansevieria trifasciata, as a potential adsorbent for methylene blue (MB) removal. The equilibrium was reached fast for almost all concentrations after 60 min, obtaining the maximum capacity of 139.98 mg g^-1 for 200 mg L^-1. The increase in temperature disfavored the dye adsorption, with the maximum adsorption capacity of 225.8 mg g^-1, observed for 298 K. The thermodynamic parameters confirmed that the adsorption process is spontaneous and exothermic. A direct sloping curve was established for the fixed bed, with breakthrough time (t_b), column stoichiometric capacities (q_eq), and the mass transfer zone lengths (Z_m) were 1430, 1130, and 525 min; 60.48, 187.01, and 322.65 mg g^-1; and 8.81, 11.28, and 10.71 cm, for 100, 200, and 500 mg L^-1, respectively. Furthermore, in a mixture of several dyes, the adsorbent obtained the removal of 51% of the color.

A facile approach to cellulose/multi-walled carbon nanotube gels-Structure, formation process and adsorption to methylene blue

In view of the deficiencies in the preparation of cellulose gels, such as, cumbersome process, harsh conditions, high consumption of chemicals, secondary pollution caused by side reactions, this work reports a facile approach to make cellulose/multi-walled carbon nanotube (MWCNTs) hydrogels and aerogels via mixing cellulose with N,N'-methylene bisacrylamide (MBA) and MWCNTs in NaOH/urea/H₂O aqueous solution. The gels were revealed to be formed by an addition reaction between the double bonds of MBA and the hydroxyl groups of cellulose and the intermolecular interactions between cellulose and MWCNTs. The preparation process can be realized at room temperature and atmospheric pressure without the intervention of ultrasonic dispersion, catalyst and initiator. The gelation time, puncture strength and water retention ability of the hydrogels were investigated. Results showed that, compared with pure cellulose hydrogel, cellulose/MWNCTs hydrogels have obviously shorter sol-gel transition time (124-129.2 min), higher puncture strength (29.6022-34.2854 KPa) and water retention ability (274.2619-301.7291 g/g). Cellulose/MWCNTs aerogels possessed three dimensional network with macroporous structure (about 500 μm), low density (0.00546-0.00557 g/cm³), high porosity (99.6360-99.6426 %), good thermal stability (242 °C) and certain absorbency to methylene blue (233.2901-242.1122 mg/g).

Recyclable & highly porous organo-aerogel adsorbents from biowaste for organic contaminants' removal

Selective aerogel has become an attractive adsorbent for removing oil and organic contaminants due to its low density and excellent adsorption capacity. However, aerogels usually use non-sustainable or expensive nanomaterials and require complicated fabrication processes. Herein, using low-cost lignin reclaimed from the biorefinery waste stream as the starting material, we fabricated a highly porous, mechanically strong, and stable aerogel via a simple and one-step method under mild conditions. This aerogel exhibits a controllable micropore structure and achieves quick and efficient adsorption for oil (435% g/g), as well as toxic solvents such as THF (365% g/g). The selective and stable adsorbent can be reused multiple times and the oil adsorption capacity after 5 cycles remained at 89%. This highly efficient, mechanically strong, stable, and regenerable aerogel is a potential candidate for multiple applications such as cleaning up organic contaminants, oil remediation, and oil/water separation. Meanwhile, it also employs a "waste-treat-waste" concept by adding extra value to the biorefinery process for high-efficiency circular bioeconomy.

Magnetic graphene oxide–lignin nanobiocomposite: a novel, eco-friendly and stable nanostructure suitable for hyperthermia in cancer therapy

A novel nanobiocomposite was designed and synthesized under mild conditions to evaluate its potential in hyperthermia therapy.

Facile fabrication of robust, versatile, and recyclable biochar-graphene oxide composite monoliths for efficient removal of different contaminants in water

Water pollution produced by various contaminants is presently a major worldwide issue, posing a significant challenge to the development of novel materials for water treatment. Herein, robust and recyclable biochar-graphene oxide (BC-GO) composite monoliths were prepared utilizing lignin precursor as a carbon source in a one-pot hydrothermal process free of hazardous chemicals. Characterization results indicated the BC-GO composite monolith had abundant microchannels, nanopores, and a large specific surface area, thereby exhibiting a high adsorption capacity of 796.8 mg g^-1 to doxycycline in water, which was superior to conventional adsorbents. Furthermore, by annealing the BC-GO composite monolith, it could be transformed to hydrophobic (CA = 140°). The annealed BC-GO composite monolith retained a pronounced porous structure with a larger surface area and showed exceptional absorption capabilities of 55-130 g g^-1 toward various oils and solvents, which were higher/comparable to previously reported graphene-based materials. In addition, both BC-GO composite monoliths were highly stable and could be reused for a number of cycles of pollutants removal. The simplicity, environmental friendliness, and effectiveness of our approach to building BC-GO composite monoliths may pave the way for their future applications in the field of water purification.

Fabrication, Structure, Performance, and Application of Graphene-Based Composite Aerogel

Graphene-based composite aerogel (GCA) refers to a solid porous substance formed by graphene or its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), with inorganic materials and polymers. Because GCA has super-high adsorption, separation, electrical properties, and sensitivity, it has great potential for application in super-strong adsorption and separation materials, long-life fast-charging batteries, and flexible sensing materials. GCA has become a research hotspot, and many research papers and achievements have emerged in recent years. Therefore, the fabrication, structure, performance, and application prospects of GCA are summarized and discussed in this review. Meanwhile, the existing problems and development trends of GCA are also introduced so that more will know about it and be interested in researching it.

Efficient and selective removal of Pb(ii) from aqueous solution by a thioether-functionalized lignin-based magnetic adsorbent

The effective and selective removal of heavy metal ions from sewage is a major challenge and is of great significance to the treatment and recovery of metal waste. Herein, a novel magnetic lignin-based adsorbent L@MNP was synthesized by a thiol-ene click reaction under ultraviolet (UV) light irradiation. Multiple characterization techniques, including Fourier transform infrared (FT-IR) spectrometry, X-ray diffraction (XRD), elemental analysis, vibrating sample magnetometry (VSM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), confirmed the formed nano-morphology and structure of L@MNP. The effects of pH, contact time, initial metal concentration and temperature on the batch adsorption of Pb(ii) by L@MNP were investigated. Due to the existence of sulfur and oxygen-containing sites, the maximum adsorption capacity of L@MNP for Pb(ii) could reach 97.38 mg g^-1, while the adsorption equilibrium was achieved within 30 min. The adsorption kinetics and isotherms were well described by the pseudo-second-order model and Langmuir model, respectively, suggesting a chemical and monolayer adsorption process. In addition, L@MNP showed a high adsorption selectivity (k _Pb = 0.903) toward Pb(ii) in the presence of other co-existing metal ions. The experimental results also revealed that L@MNP displayed structural stability, ease of recovery under an external magnetic field, and acceptable recyclability after the fifth cycle. Considering its facile preparation, low cost and high adsorption efficiency, the developed L@MNP adsorbent demonstrated great potential in removing heavy metal ions from wastewater.

Sorptive removal of methylene blue from water by magnetic multi-walled carbon nanotube composites

In the present study, five magnetic multi-walled carbon nanotubes (MMWCNTs) with different diameters were prepared and their performance on the sorptive removal of methylene blue (MB) from water was investigated. Transmission electron microscope, scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction, and vibrating sample magnetometer confirm that the surface of these MMWCNTs has been decorated by Fe₃O₄ nanoparticles, which renders the MMWCNTs superparamagnetic. Thus, these MMWCNTs can be easily separated from water after the adsorption. During the adsorption process, pH slightly affected the removal efficiency of MB and the adsorption performed better under weak alkaline conditions. Adsorption kinetics followed the pseudo-second-order kinetic model well, and the Dubinin-Radushkevich model fitted the isotherms best. The maximum adsorption capacity for MB reached 204.2 mg/g, and the values decreased with increasing diameters of MMWCNTs due to decreasing specific surface areas. The thermodynamics parameters indicated the spontaneous and exothermic nature of the adsorption. The reusability test showed that MMWCNTs could be used for 6 cycles without significant loss of the adsorption capacity. And common ions (K⁺, Na⁺, Ca²⁺ and Al³⁺) and SDS in water did not show greatly effects on the removal efficiency of MB. Hence, MMWCNTs prepared in this study could be promising adsorbents for dyes removal from wastewater.

Porous Aerogels and Adsorption of Pollutants from Water and Air: A Review

Aerogels are open, three-dimensional, porous materials characterized by outstanding properties, such as low density, high porosity, and high surface area. They have been used in various fields as adsorbents, catalysts, materials for thermal insulation, or matrices for drug delivery. Aerogels have been successfully used for environmental applications to eliminate toxic and harmful substances-such as metal ions or organic dyes-contained in wastewater, and pollutants-including aromatic or oxygenated volatile organic compounds (VOCs)-contained in the air. This updated review on the use of different aerogels-for instance, graphene oxide-, cellulose-, chitosan-, and silica-based aerogels-provides information on their various applications in removing pollutants, the results obtained, and potential future developments.

Synthesis of a Lignin-Fe/Mn Binary Oxide Blend Nanocomposite and Its Adsorption Capacity for Methylene Blue

A high-performance modified lignin adsorbent was prepared through coprecipitation of ferrous, ferric, and permanganate with lignin in sodium hydroxide solution. The structural characteristics of the synthesized lignin-Fe/Mn binary oxide blend nanocomposite (L-F/M) and its performance on the methylene blue (MB) removal from aqueous solution were evaluated. Influence factors of adsorption effects were analyzed including pH, contact time, dye concentration, temperature, and thermodynamics. The pseudo-second-order kinetic model well described the adsorption kinetics, and the adsorption isotherms best fitted the Langmuir model with a maximum adsorption capacity of 252.05 mg g-1 at 298 K. The adsorption mechanism showed that the L-F/M introduced the metallic element and negative charges to the lignin surface, which improved the adherence of MB via hydrogen bonding, electrostatic interaction, and coordination. Moreover, the removal ratio of MB maintained 81.2% after being used in five adsorption-desorption cycles. Results indicated that the L-F/M obtained was an efficient candidate for dye wastewater treatment.

Wood-Derived Functional Polymeric Materials

In recent years, tremendous efforts have been dedicated to developing wood-derived functional polymeric materials due to their distinctive properties, including environmental friendliness, renewability, and biodegradability. Thus, the uniqueness of the main components in wood (cellulose and lignin) has attracted enormous interest for both fundamental research and practical applications. Herein, the emerging field of wood-derived functional polymeric materials fabricated by means of macromolecular engineering is reviewed, covering the basic structures and properties of the main components, the design principle to utilize these main components, and the resulting wood-derived functional polymeric materials in terms of elastomers, hydrogels, aerogels, and nanoparticles. In detail, the natural features of wood components and their significant roles in the fabrication of materials are emphasized. Furthermore, the utilization of controlled/living polymerization, click chemistry, dynamic bonds chemistry, etc., for the modification is specifically discussed from the perspective of molecular design, together with their sequential assembly into different morphologies. The functionalities of wood-derived polymeric materials are mainly focused on self-healing and shape-memory abilities, adsorption, conduction, etc. Finally, the main challenges of wood-derived functional polymeric materials fabricated by macromolecular engineering are presented, as well as the potential solutions or directions to develop green and scalable wood-derived functional polymeric materials.

Adsorptive removal of dye in wastewater by metal ferrite-enabled graphene oxide nanocomposites

Dyes are hazardous compounds commonly found in industrial wastewaters. Efficient and inexpensive removal of dye molecules from the water matrix has been demonstrated by adsorption processes. Magnetic nano-adsorbents, such as metal ferrites, can be efficiently recovered from the reaction mixture after treating the pollutant. Herein, MFe₂O₄@GO (M = Cu, Co or Ni) was synthesized via solution combustion method for the removal of dye molecules from aqueous solutions. The characteristics of the MFe₂O₄@GO, including surface area and pore diameter, surface functional groups, and elemental composition, were examined. Methylene blue was used as representative dye pollutant. Batch adsorption results conformed to the Langmuir isotherm. Maximum adsorption capacities of the MFe₂O₄@GO (M = Cu, Co or Ni) were 25.81, 50.15 and 76.34 mg g^-1, respectively. Kinetics of methylene blue adsorption fitted the pseudo-second-order model. Overall, NiFe₂O₄@GO exhibited the highest adsorbent performance among the graphene-metal ferrites investigated, primarily because of its high specific surface area and presence of mesopores.

Graphene-Based Materials Immobilized within Chitosan: Applications as Adsorbents for the Removal of Aquatic Pollutants

Graphene and its derivatives, especially graphene oxide (GO), are attracting considerable interest in the fabrication of new adsorbents that have the potential to remove various pollutants that have escaped into the aquatic environment. Herein, the development of GO/chitosan (GO/CS) composites as adsorbent materials is described and reviewed. This combination is interesting as the addition of graphene to chitosan enhances its mechanical properties, while the chitosan hydrogel serves as an immobilization matrix for graphene. Following a brief description of both graphene and chitosan as independent adsorbent materials, the emerging GO/CS composites are introduced. The additional materials that have been added to the GO/CS composites, including magnetic iron oxides, chelating agents, cyclodextrins, additional adsorbents and polymeric blends, are then described and discussed. The performance of these materials in the removal of heavy metal ions, dyes and other organic molecules are discussed followed by the introduction of strategies employed in the regeneration of the GO/CS adsorbents. It is clear that, while some challenges exist, including cost, regeneration and selectivity in the adsorption process, the GO/CS composites are emerging as promising adsorbent materials.

Fast one-step preparation of porous carbon with hierarchical oxygen-enriched structure from waste lignin for chloramphenicol removal

This work explored the use of porous carbon (PC) materials converted from waste lignin as raw materials for the removal of chloramphenicol (CAP) in water. The PC with controllable pores was prepared through a facile, cost-effective one-step method. The physical and chemical properties of the material were characterized by BET, SEM, FT-IR, and XRD, and the best conditions for preparation were selected based on the results of adsorption experiments. The PC, which was prepared at reaction temperature of 800 °C and the K₂CO₃/sodium lignosulfonate mass ratio of 4, namely PC-800-4, had a high specific surface area (1305.5 m² g^-1) and pore volume (0.758 cm³ g^-1). At a lower initial concentration of CAP (C₀ = 120 mg L^-1), the maximum adsorption capacity of this adsorbent was 534.0 mg g^-1 at 303 K. In addition, PC-800-4 maintained good adsorption performance in a wide pH range and strongly resisted the interference of ions and humic acid. The results showed that the adsorption removal CAP was based on physical adsorption and chemical adsorption as a process supplement. The advantages of wide sources, high efficiency and speed, wide application, and rich oxygen-containing functional groups made the adsorbent have great application potential for removal chloramphenicol from water.

Lignin-derived (nano)materials for environmental pollution remediation: Current challenges and future perspectives

The supply of affordable drinking and sufficiently clean water for human consumption is one of the world's foremost environmental problems and a large number of scientific research works are addressing this issue Various hazardous/toxic environmental contaminants in water bodies, both inorganic and organic (specifically heavy metals and dyes), have become a serious global problem. Nowadays, extensive efforts have been made to search for novel, cost effective and practical biosorbents derived from biomass resources with special attention to value added, biomass-based renewable materials. Lignin and (nano)material adorned lignin derived entities can proficiently and cost effectively remove organic/inorganic contaminants from aqueous media. As low cost of preparation is crucial for their wide applications in water/wastewater treatment (particularly industrial water), future investigations must be devoted to refining and processing the economic viability of low cost, green lignin-derived (nano)materials. Production of functionalized lignin, lignin supported metal/metal oxide nanocomposites or hydrogels is one of the effective approaches in (nano)technology. This review outlines recent research progresses, trends/challenges and future prospects about lignin-derived (nano)materials and their sustainable applications in wastewater treatment/purification, specifically focusing on adsorption and/or catalytic reduction/(photo)degradation of a variety of pollutants.

A Double cross-linked strategy to construct graphene aerogels with highly efficient methylene blue adsorption performance

A novel lysine and EDA double cross-linked graphene aerogel (LEGA) was constructed. The prepared LEGA was utilized as a methylene blue (MB) adsorbent in the wastewater treatment. It exhibits a three-dimensional interconnected porous structure benefiting dye adsorption. Its compression property is highly enhanced with the addition of lysine. Adsorption isotherm and kinetics of MB onto LEGA were discussed. Their results show that MB adsorption onto LEGA was fitted to follow Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. LEGA has an excellent adsorption capacity towards MB as high as 332.23 mg/g and its MB adsorption process is proved to be an exothermic process. The mechanism for MB adsorption onto LEGA was proposed as the ion exchange, electrostatic interaction, π-π stacking interaction and hydrogen bonding. Thus, LEGA is confirmed to be a sustainable and green MB adsorbent with highly removal efficiency in the treatment of wastewater.

Self-assembly preparation of lignin-graphene oxide composite nanospheres for highly efficient Cr(vi) removal

Recently, research interest in the application of lignin is growing, especially as adsorbent material. However, single lignin shows unsatisfactory adsorption performance, and thus, construction of lignin-based nanocomposites is worth considering. Herein, we introduced graphene oxide (GO) into lignin to form lignin/GO (LGNs) composite nanospheres by a self-assembly method. FTIR and 1H NMR spectroscopy illustrated that lignin and GO are tightly connected by hydrogen bonds. The LGNs as an environmental friendly material, also exhibit excellent performance for Cr(vi) removal. The maximum sorption capacity of LGNs is 368.78 mg g-1, and the sorption efficiency is 1.5 times than that of lignin nanospheres (LNs). The removal process of Cr(vi) via LGNs mainly relies on electrostatic interaction, and it also involves the reduction of Cr(vi) to Cr(iii). Moreover, LGNs still have high adsorption performance after repeating five times with the sorption capacity of 150.4 mg g-1 in 200 mg g-1 Cr(vi) solution. Therefore, the prepared lignin-GO composite nanospheres have enormous potential as a low-cost, high-absorbent and recyclable adsorbent, and can be used in wastewater treatment.

Preparation of a ZIF-67-modified magnetic solid phase extraction material and its application in the detection of pyridine ring insecticides

An advanced and reliable m-SPE material of a water-stable ZIF was developed for the determination of trace praziquantel and pymetrozine in spinach and broccoli.

Green and plant-based adsorbent from tragacanth gum and carboxyl-functionalized carbon nanotube hydrogel bionanocomposite for the super removal of methylene blue dye

This study aims to prepare a hydrogel bionanocomposite (HBNC) as an efficient adsorbent and introduce it as a suitable replacement for petroleum-based adsorbents. Thus, tragacanth gum (TG), and carboxyl-functionalized carbon nanotube (CFCNT) were used as raw materials. HBNCs were prepared with the aid of ultrasonication, and different methods were employed to characterize them. The surface structures of the HBNCs were altered after the addition CFCNT into TG and exposure to ultrasound, as well. Transmission electron microscopy images showed CFCNTs were well dispersed in TG. Then, the adsorption of methylene blue (MB) was performed using these HBNCs. The removal efficiency was over 80% at optimized conditions. Nonlinear and linear forms of Langmuir, Freundlich, Dubinin-Radushkevich, Sips, and Redlich-Peterson (R-P) were applied to find the proper arrangement of MB onto the adsorbent. Using statistical equations, it was revealed that the process obeyed the linear R-P model, indicating a mixture of mono- and multilayer adsorption (but mostly monolayer). Also, pseudo-second-order was the appropriate kinetic model and suggested chemical adsorption. According to the thermodynamic calculations, this process was exothermic and spontaneous, and the type of interactions between HBNC and MB was physicochemical. Also, the diffusion study indicated that film diffusion is the primary mechanism.

A Low-Cost Biomimetic Heterostructured Multilayer Membrane with Geopolymer Microparticles for Broad-Spectrum Water Purification

Membranes have received wide interest in water purification. However, the development of a low-cost and eco-friendly membrane with the desired structure for broad-spectrum water purification still remains a great challenge. Inspired by the hierarchical structure and functions of wood, a heterostructured multilayer membrane fabricated through a facile and "green" layer-by-layer self-assembly method was reported in this study. Specifically, the hydrophilic geopolymer microparticles were doped into sodium alginate matrix to construct "xylem" layers with numerous microchannels, and chitosan was used to build "phloem" layers with dense structures. The resultant biomimetic multilayer membrane displayed a distinct heterostructure and provided the desired rejection to different kinds of pollutants including nanoparticles, soluble dyes, and heavy metal ions, as well as emulsified oil droplets. Furthermore, the biomimetic membrane exhibited a superior stability in a long-term operation and an excellent recyclability for multiple usages for oil droplets removal. The proposed biomimetic membrane prepared in a completely "green" way possesses great potential in practical application for water purification and separation.