Insights into chain-length distributions of amylopectin and amylose molecules on the gelatinization property of rice starches

Effects of different oil additives on water resistance of corn starch straws

To investigate the effect of oil additives on improving the water resistance of corn starch straws, corn oil (CO), soybean oil (SO), rapeseed oil (RO), peanut oil (PO), lard (LD) and coconut oil (CCO) were chosen and compared the structure and properties of starch straws with different oil additives. Corn starch straws (CS), and starch straws supplemented with CO, SO, RO, PO, LD and CCO were prepared by thermoplastic extrusion. The results showed that the incorporation of oils effectively enhanced the water resistance of starch straws such as water absorption, water solubility and water swelling performance. Meanwhile, the flexural strength of starch straws significantly increased. There was no significant linear relationship among starch chain length, oil unsaturation and straw performance. Among seven starch straws, S-SO had the strongest hydrogen bond interaction (3289 cm-1) and relaxation time (0.96 ms). The S-CO had the highest relative crystallinity (16.82 %) and degree of double helix (1.535), hence resulting in the lowest water absorption and solubility values, the highest flexural strength (23.43 MPa), the highest ΔT value (9.93 °C) and ΔH value (4.79 J/g). S-RO had the highest thermal transition temperatures.

Exploring the relationship between starch structure and physicochemical properties: The impact of extrusion on highland barley flour

Highland barley (HB) is an intriguing plateau cereal crop with high nutrition and health benefits. However, abundant dietary fiber and deficient gluten pose challenges to the processing and taste of whole HB products. Extrusion technology has been proved to be effective in overcoming these hurdles, but the association between the structure and physicochemical properties during extrusion remains inadequately unexplored. Therefore, this study aims to comprehensively understand the impact of extrusion conditions on the physicochemical properties of HB flour (HBF) and the multi-scale structure of starch. Results indicated that the nutritional value of HBF were significantly increased (soluble dietary fiber and β-glucan increased by 24.05%, 19.85% respectively) after extrusion. Typical underlying mechanisms based on starch structure were established. High temperature facilitated starch gelatinization, resulting in double helices unwinding, amylose leaching, and starch-lipid complexes forming. These alterations enhanced the water absorption capacity, cold thickening ability, and peak viscosity of HBF. More V-type complexes impeded amylose rearrangement, thus enhancing resistance to retrogradation and thermal stability. Extrusion at high temperature and moisture exhibited similarities to hydrothermal treatment, partly promoting amylose rearrangement and enhancing HBF peak viscosity. Conversely, under low temperature and high moisture, well-swelled starch granules were easily broken into shorter branch-chains by higher shear force, which enhanced the instant solubility and retrogradation resistance of HBF as well as reduced its pasting viscosity and the capacity to form gel networks. Importantly, starch degradation products during this condition were experimentally confirmed from various aspects. This study provided some reference for profiting from extrusion for further development of HB functional food and "clean label" food additives.

Morphological, Molecular Structural and Physicochemical Characterization of Starch Granules Formed in Endosperm of Rice with Ectopic Overexpression of α-Amylase

The objective of this study was to characterize the endosperm starch in rice that ectopically overexpressed the α-amylase. Transgenic rice plants, transformed with cauliflower mosaic virus 35S promoter driven AmyI-1 (35S::AmyI-1) and AmyII-4 (35S::AmyII-4), and 10 kDa prolamin promoter driven AmyI-1 (P10::AmyI-1), were cultivated under standard conditions (23 °C, 12 h in the dark/ 26 °C, 12 h in the light), and brown grains were subsequently harvested. Each grain displayed characteristic chalkiness, while electron microanalyzer (EPMA)-SEM images disclosed numerous small pits on the surface of the starch granules, attributable to α-amylase activity. Fluorescence labeling and capillary electrophoresis analysis of starch chain length distribution revealed no significant alterations in the starches of 35S::AmyI-1 and 35S::AmyII-4 transgenic rice compared to the wild-type. Conversely, the extremely short α-glucan chains (DP 2-8) exhibited a dramatic increase in the P10::AmyI-1 starch. Rapid visco-analyzer analysis also identified variations in the chain length distribution of P10::AmyI-1 starch, manifesting as changes in viscosity. Moreover, 1H-NMR analysis uncovered dynamic modifications in the molecular structure of starch in rice grain transformed with P10::AmyI-1, which was found to possess unprecedented structural characteristics.

The effects of adding various starches on the structures of restructured potato-based dough and the oil uptake of potato chips

BACKGROUND

The material composition significantly influences the oil absorption and quality characteristics of fried food products. The oil absorption of restructured potato chips is highly dependent on the structural properties of the restructured potato-based dough produced prior to frying. In this study, three types of starch were added to modify the structure of restructured potato-based dough, allowing the production of potato chips with less oil absorption.

RESULTS

Distinct differences were observed among the three types of starch in terms of amylose content, chain length distribution, swelling power, solubility, crystalline structure and pasting properties. The addition of wheat starch, corn starch and tapioca starch changed the rheological properties, water distribution and strength of the restructured dough. Importantly, adding wheat starch and corn starch significantly lowered the oil content of potato chips by 7.94% and 13.06%, respectively. The reduction in oil absorption by potato chips was attributed to the increased strength of the starchy gel network of the dough, a slower rate of water evaporation and a limitation of dough expansion during frying.

CONCLUSION

Adding wheat starch or corn starch to restructured potato-based dough resulted in a decrease in the oil absorption of potato chips by creating a stronger starchy gel network in the dough. This study could guide the development of suitable material compositions, which are important for producing fried food products with lower oil content. © 2024 Society of Chemical Industry.

The important role of starch fine molecular structures in starch gelatinization property with addition of sugars/sugar alcohols

The relationship between the fine structure of starch and its gelatinization properties is not well studied, particularly in relation to the influence of sugar or sugar alcohol. In this study, seven starches with distinct molecular structures were investigated to determine how different sugars and sugar alcohols affect their gelatinization properties. The inclusion of sugars and sugar alcohols resulted in a significant elevation of starch gelatinization temperatures (∼ 8 °C), especially with sucrose, isomaltose and isomalt. Nevertheless, the influence of these sugars/ sugar alcohols on the gelatinization temperature range and enthalpy change varied depending on the particular starch varieties. According to the correlation analysis, sugars and sugar alcohols mainly exert their impact on the starch gelatinization temperature range and enthalpy change by possibly interacting with amylose chains possessing a degree of polymerization ranging from 100 to 1000 (p < 0.05) and inhibiting the amylose leaching during gelatinization. These findings help a better understanding of the complex relationship between starch fine structure and gelatinization properties under the influence of sugars and sugar alcohols.

Effects of Extrusion Technology on Physicochemical Properties and Microstructure of Rice Starch Added with Soy Protein Isolate and Whey Protein Isolate

In order to improve the retrogradation of rice starch (RS) and the quality of rice products, soy protein isolate (SPI), whey protein isolate (WPI), and rice flour were mixed and further extruded into mixed flour. The physicochemical properties and morphology of starch of extruded rice flour (ERS) and starch of extruded mixtures of SPI, WPI, and rice flour (SPI-WPI-ERS) were analyzed. The distribution of amylopectin chain length, molecular weight, microstructure, crystallinity, short-range ordered structure, pasting properties, and thermodynamic properties of RS, ERS, and SPI-WPI-ERS were measured. The results showed that, compared with rice starch, the proportion of long-chain starch, total starch content, and molecular weight were decreased in ERS and SPI-WPI-ERS, but the proportion of short-chain and amylose content was increased. The short-range order structure was destroyed. The water absorption of ERS and SPI-WPI-ERS was much higher than rice starch at 55 °C, 65 °C, and 75 °C, but lower than that of rice starch at 95 °C. Therefore, the retrogradation characteristics of SPI-WPI-ERS were improved. The setback of rice starch products was reduced and the setback of SPI-WPI-ERS was lower than that of ERS. Overall, the retrogradation of rice starch was delayed by adding exogenous protein and extrusion technology, and the application range of rice flour in staple food products was broadened.

Effect of starch and protein on eating quality of japonica rice in Yangtze River Delta

This study examined four types of japonica rice from Yangtze River Delta, categorized based on amylose content (AC) and protein content (PC): high AC with high PC, high AC with low PC, low AC with high PC, and low AC with low PC. It systematically explored the effect of starch, protein and their interactions on eating quality of japonica rice. Rheological analysis revealed that increased amylose, long chains amylopectin or protein levels during cooking strengthen starch-protein interactions (hydrogen bonding), forming a firm gel network. Scanning electron microscopy showed that increased amylose, long chains amylopectin or protein levels made protein and starch more stable in combination during cooking, limiting starch structure cleavage. Therefore, the eating quality of high AC in similar PC japonica rice and high PC in similar AC japonica rice were poor. Further, correlation and random-forest analysis (RFA) identified amylose as the most influential factor in starch-protein interactions affecting rice eating quality, followed by amylopectin and protein. RFA also revealed that in high AC japonica rice, the interactions of Fb3 and albumin with amylose were more conducive to forming good eating quality. In low AC japonica rice, the interactions of Fb2 and prolamin with amylose were more beneficial.

Impact of molecular structure of starch on the glutinous taste quality of cooked chestnut kernels

Chestnuts are a starchy food with a characteristic glutinous taste that is often used to assess their quality. In this study, our findings indicated that chestnuts with higher glutinous taste quality had lower amylose content and microcrystalline structures, as well as higher subcrystalline structures and relative crystallinity in both the raw and steamed starches. In the leached starch, chestnuts with higher glutinous taste quality had lower amylopectin B1 chains and microcrystalline structure, but higher amylopectin B2 chains, subcrystalline structure and relative crystallinity. These results suggest that amylose content, relative crystallinity, and amylopectin chain length distribution are important factors determining the glutinous taste quality of chestnuts. To further enhance our understanding of these factors, an sensory evaluation model was developed based on textural profile analysis parameters. This study provides valuable insights into the relationship between molecular structure of starch and the glutinous taste quality of starchy foods.

Preparation of cassava starch-gelatin yolk-shell microspheres by water-in-water emulsion method

This paper reports the preparation and characterization of gelatin-cassava starch microspheres using the water-in-water emulsion technique. The effects of different weight ratios (10: 0, 9: 1, 8: 2, 7: 3, 6: 4, 5: 5) of starch to gelatin on the morphology, structure, thermal properties, and stability of microspheres were investigated. The morphology results showed that most microspheres had spherical shapes and smooth surfaces. When the weight ratio of starch to gelatin was 5: 5, the prepared microspheres formed a stable yolk-shell structure. The swelling capacity of the microspheres increased with the proportion of gelatin, up to 682.3 %. The gelatin and starch in the microspheres were compatible but not miscible. Compared with the native starch, the crystalline structure of microspheres changed from A-type to a mixture of B-type and V-type, and the relative crystallinity decreased. Differential scanning calorimetry results showed that the melting of microspheres involved both gelatin dissolution and starch gelatinization. Due to the formation of composite microspheres, the starch content decreased, and the release of reducing sugars from the microspheres upon hydrolysis was reduced. The gelatin-cassava starch microspheres are simple to prepare, biocompatible, and can be used as a potential material for microencapsulation.

Starch multiscale structure and physicochemical property alterations in high-quality indica rice quality and cooked rice texture under different nitrogen panicle fertilizer applications

The starch multiscale structure, physiochemical properties, grain quality and cooked rice texture of high-quality early and late indica were analyzed under nitrogen panicle fertilizer (low panicle fertilizer, LPF; middle panicle fertilizer, MPF; high panicle fertilizer, HPF) treatments and their internal relations were investigated. Compared to the MPF treatment, the starch granules in HPF and LPF had more surface-proteins and irregular voids for high-quality early and late indica rice cultivars, respectively. Nitrogen panicle fertilization application increased amylopectin medium and long chains as well as protein content, resulting in higher relative crystallinity and gelatinization temperatures. Moderate changes in starch multistructures and physicochemical properties such as branching degree, amylopectin medium chain, and pasting viscosities derived from MPF treatment significantly improved processing, appearance qualities and cooked rice texture. Additionally, the decrease in starch branching, gelatinization temperatures, and granule uniformity along with an increase in large granules, breakdown, and △Hgel under MPF treatment were the main reasons for improving rice textural properties.

Improvement of cooking and textural properties of rice flour-soy protein isolate noodles stabilised with microbial transglutaminase and glucono-δ-lactone and dried using superheated steam

In a bid to produce rice flour noodles with improved texture and reduced cooking time, rice flour-soy protein isolate noodles (RNS) were structurally enhanced by a combined treatment (COM) of microbial transglutaminase (MTG) with glucono-δ-lactone (GDL). The RNS-COM was either dried using superheated steam (SHS) to yield RNS-COM-SHS or steamed for 10 min (S10) before air drying to produce RNS-COM-S10 noodles. Control samples were SHS-dried rice flour (RN-SHS) and air-dried RN-S10 noodles. In general, textural and microstructural properties indicated higher textural properties and a more robust network in RNS-COM-SHS and RNS-COM-S10 than in other noodles. However, optimum cooking time (P < 0.5) was in the order; RN-SHS, RNS-COM-SHS < RN-S10 < RNS-COM-S10. As a result of the COM treatment, structurally enhanced noodles were more resistant to cooking. As applied in RNS-COM-SHS noodles, SHS was able to improve cooking quality, probably through the formation of bigger and evenly spread pores that had promoted faster gelatinisation of starch, with a high order of relative starch crystallinity.

Starch chain-length distributions determine cooked foxtail millet texture and starch physicochemical properties

Starch chain-length distributions play an important role in controlling cereal product texture and starch physicochemical properties. Cooked foxtail millet texture and starch physicochemical properties were investigated and correlated with starch chain-length distributions in eight foxtail millet varieties. The average chain lengths of amylopectin and amylose were in the range of DP 24-25 and DP 878-1128, respectively. The percentage of short amylopectin chains (Ap1) was negatively correlated with hardness but positively correlated with adhesiveness and cohesion. Conversely, the amount of amylose intermediate chains was positively correlated with hardness but negatively correlated with adhesiveness and cohesion. Additionally, the amount of amylose long chains was negatively correlated with adhesiveness and chewiness. The relative crystallinity (RC) of starch decreased with reductions in the length of amylopectin short chains in foxtail millet. Pasting properties were mainly influenced by the relative length of amylopectin side chains and the percentage of long amylopectin branches (Ap2). Longer amylopectin long chains resulted in lower gelatinization temperature and enthalpy (ΔH). The amount of starch branched chains had important effects on the gelatinization temperature range (ΔT). These results can provide guidance for breeders and food scientists in the selection of foxtail millet with improved quality properties.

Effects of postponing nitrogen topdressing on starch structural properties of superior and inferior grains in hybrid indica rice cultivars with different taste values

Introduction

Nitrogen (N) fertilizer management, especially postponing N topdressing can affect rice eating quality by regulating starch quality of superior and inferior grains, but the details are unclear. This study aimed to evaluate the effects of N topdressing on starch structure and properties of superior and inferior grains in hybrid indica rice with different tastes and to clarify the relationship between starch structure, properties, and taste quality.

Methods

Two hybrid indica rice varieties, namely the low-taste Fyou 498 and high-taste Shuangyou 573, were used as experimental materials. Based on 150 kg·N hm-2, three N fertilizer treatments were established: zero N (N0), local farmer practice (basal fertilizer: tillering fertilizer: panicle fertilizer=7:3:0) (N1), postponing N topdressing (basal fertilizer: tillering fertilizer: panicle fertilizer=3:1:6) (N2).

Results

The starch granules of superior grains were more complete, and the decrease in small granules content and the stability of starch crystals were a certain extent less than those of inferior grains. Compared with N1, under N2, low-taste and high-taste varieties large starch granules content were significantly reduced by 6.89%, 0.74% in superior grains and 4.26%, 2.71% in inferior grains, the (B2 + B3) chains was significantly reduced by 1.61%, 0.98% in superior grains, and 1.18%, 0.97% in inferior grains, both reduced the relative crystallinity and 1045/1022 cm-1, thereby decreasing the stability of the starch crystalline region and the orderliness of starch granules. N2 treatment reduced the ΔHgel of two varieties. These changes ultimately contributed to the enhancement of the taste values in superior and inferior grains in both varieties, especially the inferior grains. Correlation analysis showed that the average starch volume diameter (D[4,3]) and relative crystallinity were significantly positively correlated with the taste value of superior and inferior sgrains, suggesting their potential use as an evaluation index for the simultaneous enhancement of the taste value of rice with superior and inferior grains.

Discussion

Based on 150 kg·N hm-2, postponing N topdressing (basal fertilizer: tillering fertilizer: panicle fertilizer=3:1:6) promotes the enhancement of the overall taste value and provides theoretical information for the production of rice with high quality.

Biochar and Nitrogen Fertilizer Change the Quality of Waxy and Non-Waxy Broomcorn Millet (Panicum miliaceum L.) Starch

The overuse of nitrogen fertilizers has led to environmental pollution, which has prompted the widespread adoption of biochar as a soil conditioner in agricultural production. To date, there has been a lack of research on the effects of biochar and its combination with nitrogen fertilizer on the quality of broomcorn millet (Panicum miliaceum L.) starch. Thus, this study examined the physicochemical characteristics of starch in two types of broomcorn millet (waxy and non-waxy) under four different conditions, including a control group (N0), nitrogen fertilizer treatment alone (N150), biochar treatment alone (N0+B), and a combination of biochar and nitrogen fertilizer treatments (N150+B). The results showed that, in comparison to the control, all the treatments, particularly N150+B, decreased the content of amylose and gelatinization temperature and enhanced the starch transparency gel consistency and swelling power. In addition, biochar can improve the water solubility of starch and the gelatinization enthalpy. Importantly, the combination of biochar and nitrogen fertilizer increased the proportion of A-granules, final viscosity, starch content, and the average degree of amylopectin in polymerization. Thus, this research indicates that the combinations of biochar and nitrogen fertilizer result in the most significant improvement in the quality of starch produced from broomcorn millet.

Structural and physicochemical properties of bracken fern (Pteridium aquilinum) starch

Introduction

Bracken fern (Pteridium aquilinum) starch is a non-mainstream, litter-researched starch, thus the starch characteristics remain largely unknown.

Methods

The structural and physicochemical properties of two bracken starches were systematically investigated, by use of various techniques that routinely applied in starch analysis.

Results and Discussion

The starches had amylose contents of 22.6 and 24.7%, respectively. The starch granules possessed C-type polymorph with D (4,3) ranging from 18.6 to 24.5 μm. During gelatinization event, the bracken starches showed lower viscosity than typical for rice starch, and lower gelatinization temperature than typical for cereal starches. After gelatinization event, bracken starches formed much softer and sticky gel than rice and potato starch. The molecular weight and branching degree (indexed by Mw, Mn and Rz values) of bracken starches were much higher than starches of many other sources. The branch chain length distributions showed that the bracken starches were structurally similar to some rice varieties (e. g. BP033, Beihan 1#), as reflected by proportions of A, B1, B2, and B3 chains. Notable differences in some starch traits between the two bracken starches were recorded, e. g. amylose content, gel hardness, gelatinization temperature and traits of structural properties. This study provides useful information on the utilization of bracken starch in both food and non-food industries.

Characterization of starch extracted from seeds of Cycas revoluta

Introduction

Starch is major component in the big seeds of Cycas revoluta, however the characteristics of Cycas revoluta remain unknown.

Methods

In this study, the physicochemical and structural properties of two starch samples extracted from Cycad revoluta seeds were systematically investigated, using various techniques.

Results

The amylose contents of the two samples were 34.3 % and 35.5%, respectively. The spherical-truncated shaped starch granules possessed A-type crystallinity, and had an average diameter less than 15 μm. Compared to most commonly consumed cereal and potato starch, Cycad revoluta starch showed distinctive characteristics. For physicochemical properties, in the process of gelatinization, the Cycad revoluta starch showed similar viscosity profile to starches of some potato varieties, but Cycad revoluta starch had higher gelatinization temperature. Upon cooling, Cycad revoluta starch formed harder gels than rice starch. For structure, the molecular weight (indexed by Mw, Mn and Rz values), branching degree and the branch chain length distribution were determined.

Discussion

The results suggested that Cycad revoluta starch were different in structure from the main-stream starches. Notable differences in some starch traits between the two samples were recorded, which could be attributed to environmental factors. In general, this study provides useful information on the utilization of Cycad revoluta starch in both food and non-food industries.

Importance of amylose chain-length distribution in determining starch gelatinization and retrogradation property of wheat flour in the presence of different salts

Although starch gelatinization and retrogradation properties of wheat flour have been studied with respect to their relations to starch structures, it remains less understood how starch structure and salt (a common food additive) together determine these properties. Gelatinization and retrogradation properties of seven wheat flours with distinct starch structures were thus investigated after adding different salts. NaCl most efficiently increased starch gelatinization temperatures, while KCl showed highest efficiency in retarding the retrogradation degree. Both gelatinization and retrogradation parameters were significantly affected by amylose structural parameters and types of salts. E.g., wheat flours with longer amylose long chains had more heterogeneous amylopectin double helices during gelatinization, while this relationship disappeared after adding NaCl. More amylose short chains increased the heterogeneity of retrograded short-range starch double helices, while the relationship was opposite after adding NaCl. These results help a better understanding of the complex relationship between starch structure and physicochemical property.

Structure and physicochemical properties of a new variety of purple rice (Oryza sativa L. indica) starch

The investigation of the structure and physicochemical properties of starch extracted from a new variety of purple rice was the aim of this study. Starch extracted from a new variety of purple rice named Tianzi No. 1 (PRS) is different in structure and physicochemical properties compared with waxy rice starch (WRS), japonica rice starch (JRS), and indica rice starch (IRS). PRS granules were diversified in shape, and the birefringence of starch particles were clearly observed. Fourier-transform infrared (FT-IR) spectroscopy exhibited the degree of double helix and low short-range order structure of PRS differed from IRS, JRS and WRS. X-ray diffraction analysis shows that PRS presented a typical A-type XRD pattern and possessed lower crystallinity. Based on rheological experiment results, PRS had the highest apparent viscosity, storage modulus (G') and loss modulus (G″). According to textural experiments, PRS gels had higher textural paraments before and after retrogradation.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01205-w.

Efficient identification of palatability-related genes using QTL mapping in rice breeding

The gelatinization temperature of rice is an important factor in determining the eating and cooking quality, and it affects consumer preference. The alkali digestion value (ADV) is one of the main methods used to test the quality of rice and has a high correlation with the gelatinization temperature. For the development of high-quality rice, it is important to understand the genetic basis of palatability-related traits, and QTL analysis is a statistical method linking phenotypic data and genotype data and is an effective method to explain the genetic basis of variation in complex traits. QTL mapping related to the ADV of brown and milled rice was performed using the 120 Cheongcheong/Nagdong double haploid (CNDH) line. As a result, 12 QTLs related to ADV were detected, and 20 candidate genes were selected from the RM588-RM1163 region of chromosome 6 through screening by gene function analysis. The comparison of the relative expression level of candidate genes showed that OsSS1q6 is highly expressed in CNDH lines with high ADV in both brown rice and milled rice. In addition, OsSS1q6 has high homology with the starch synthase 1 protein and interacts with various starch biosynthesis-related proteins, such as GBSSII, SBE, and APL. Therefore, we suggest that OsSS1q6 identified through QTL mapping could be one of the various genes involved in the gelatinization temperature of rice by regulating starch biosynthesis. This study can be used as basic data for breeding high-quality rice and provides a new genetic resource that can increase the palatability of rice.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11032-023-01392-2.

A procedure for determining the number and pattern of digestible starch fractions in multiphasic food digestograms

BACKGROUND

Plant-based foods are frequently heterogenous systems, containing multiple starch fractions with distinct digestion rate constants. An unbiased determination of the number and digestion pattern of these fractions is a prerequisite for understanding the digestive characteristics of food.

RESULTS

A non-linear least-squares procedure based on a conditional selection of simple first-order kinetics or a combination of parallel and sequential kinetics models was developed. The procedure gave robust results fitting manually generated data, and was applied to in vitro experimental digestion data of retrograded rice starches. By correlating fitting parameters with starch structural parameters, it showed that rice starches with a lower amylose content, longer amylose chains, and amylopectin intermediate chains had more digestible starch fractions after long-term retrogradation.

CONCLUSION

This procedure enables the structural basis of starch digestibility and the development of food products with slow starch digestibility to be better understood. © 2022 Society of Chemical Industry.

Influences of high hydrostatic pressure on structures and properties of mung bean starch and quality of cationic starch

It is difficult to improve the quality of chemical-modified starch by traditional technology. Hence, in this study, mung bean starch with poor chemical activity was used as raw material, the native starch was treated and the cationic starch was prepared under high hydrostatic pressure (HHP) at 500 MPa and 40 °C. By studying the changes in the structure and properties of native starch after HHP treatment, the influence mechanism of HHP on improving the quality of cationic starch was analyzed. Results showed high pressure could make water and etherifying agent enter the starch granules through pores, and HHP made the structure of starch undergone three stages similar to mechanochemical effect. After HHP treated for 5 and 20 min, the degree of substitution, reaction efficiency and other qualities of cationic starch increased remarkably. Hence, proper HHP treatment could help to improve the chemical activity of starch and quality of cationic starch.

Exploring the mechanism of high hydrostatic pressure on the chemical activity of starch based on its structure and properties changes

High hydrostatic pressure (HHP) could induce changes in the structure and properties of starch. Native corn starch was treated and octenyl succinic anhydride (OSA)-modified corn starch was prepared under different pressures (200, 350, 500 and 600 MPa) at 40℃ for 20 min. The mechanism of HHP on the chemical activity of starch was elucidated by analyzing the relationship between the changes of native starch structure and properties and the quality of OSA-modified starch. Results showed that HHP not only helped water and OSA to penetrate the starch granules but also made the structure of starch granules undergone three changes similar to mechanochemical effects. The starch granules treated by 200 MPa were in the stress stage, and the starch granules treated by 500 MPa were in the transition stage from aggregation to agglomeration. Proper pressure treatment could significantly improve chemical activity of starch and quality of OSA-modified starch.

Untangling the effect of solids content on thermal-alkali pre-treatment and anaerobic digestion of sludge

Total solids (TS) content is critical for thermal hydrolysis and anaerobic digestion (AD) performance, but its role in thermal-alkaline pre-treatment (TAP) is unclear. Therefore, this study aimed to reveal the key role of TS content in TAP and AD of waste activated sludge. The results showed that the optimum TS content of TAP (at 90 °C for 1 h, pH = 10) was 8 %. Sludge disintegration and methane production increased from 19.7 ± 2.2 % to 34.3 ± 2.9 % and from 167.4 ± 4.2 to 246.0 ± 6.2 mL/g volatile solids, respectively, when TS content were increased from 2 % to 8 %. A high TS content will likely promote sludge disintegration since it will reduce heat loss and improve heating efficiency. Additionally, increasing TS content from 2 % to 10 % minimized the production of intracellular reactive oxygen species by 30.4 ± 0.7 % and increased cell viability by 11.5 ± 2.6 %. In contrast, excessive TS content (i.e., ≥10 %) deteriorated the fluidity of sludge, which prevents it from disintegration. Once TS reached 10 %, the accumulation of ammonia nitrogen and volatile fatty acids reached 812.7 ± 27.4 and 1932.0 ± 5.3 mg/L, respectively, which reduced the activity of acidulase and coenzyme F420 and shifted the archaeal community from acetylotrophic to hydrogenotrophic methanogens. This article provides new insights into the TS content in TAP and AD technology.

A Novel Starch from Talisia floresii Standl Seeds: Characterization of Its Physicochemical, Structural and Thermal Properties

Colok seed (Talisia floresii Standl) represents 80% of the total fruit weight and is obtained from trees that grow mainly in Yucatan Peninsula. The aim of this work was the physicochemical characterization from colok starch seeds as an alternative to conventional sources and to identify its characteristics for potential applications in different industrial sectors. Starch yield was 42.1% with low levels of lipids, ashes and fibers. The amylose content was 33.6 ± 1.15%. The gelatinization temperature was 85 ± 0.25 °C. Color analysis resulted in a starch with an intermediate luminosity, reflecting a dark color. Finally, in morphology, starch granule exhibited an average size of 18.7 μm, spherical, uniform and without fractures. Overall results demonstrated that isolated colok starch can be used in food products that require high processing temperatures, such as sauces, cookies, noodles, bread and food packages.

The Effects of Starch Molecular Fine Structure on Thermal and Digestion Properties of Rice Starch

Whole white rice is a major staple food for human consumption, with its starch digestion rate and location in the gastrointestinal tract having a critical role for human health. Starch has a multi-scale structure, which undergoes order-disorder transitions during rice cooking, and this structure is a major determinant of its digestibility. The length distributions of amylose and amylopectin chains are important determinants of rice starch gelatinization properties. Starch chain-length and molecular-size distributions are important determinants of nucleation and crystal growth rates, as well as of intra- and intermolecular interactions during retrogradation. A number of first-order kinetics models have been developed to fit starch digestograms, producing new information on the structural basis for starch digestive characteristics of cooked whole rice. Different starch digestible fractions with distinct digestion patterns have been found for the digestion of rice starch in fully gelatinized and retrograded states, the digestion kinetics of which are largely determined by starch fine molecular structures. Current insights and future directions to better understand digestibility of starch in whole cooked rice are summarized, pointing to ways of developing whole rice into a healthier food by way of having slower starch digestibility.

Ion-Modified Starch Film Enables Rapid Detection of Spoiled Fruit Juices

Juice, as a liquid foodstuff, is subject to spoilage and damage due to complications during transport and storage. The appearance of intact outer packaging often makes spoilage and damage difficult to detect. Therefore, it of particular importance to develop a fast, real-time material to evaluate liquid foodstuffs. In this paper, starch films with pH response characteristics are successfully prepared by inorganic ion modification by utilizing whole starch and amylopectin as raw materials. The mechanical properties, stability properties, hydrophilic properties and pH electrical signal response indices of the films are analyzed and measured. The films exhibit good electrical conductivity values with 1.0 mL of ion addition (10 mmol/L), causing the composite film to respond sensitively to solutions with varying pH values. In the test of spoiled orange juice, the full-component corn starch (CS) film has more sensitive resistance and current responses, which is more conducive for applications in the quality monitoring of juice. The results indicate that modified starch films can potentially be applied in the real-time monitoring of the safety of liquid foodstuffs.

Relationship between starch fine structure and simulated oral processing of cooked japonica rice

Background

Simulated oral processing can be used to evaluate the palatability of cooked rice. Previously, we established a simulated oral processing method using a texture analyzer equipped with a multiple extrusion cell probe (TA/MEC). However, the relationship between oral processing and starch fine structure remains unknown.

Methods

In this study, we analyzed the oral processing properties using TA/MEC and characterized the starch fine structure of japonica rice by size-exclusion chromatography (SEC) and fluorophore-assisted capillary electrophoresis (FACE). The relationship between starch fine structure and oral processing of cooked japonica rice was further investigated.

Results

Cooked rice structure contains fast-breakdown (Type I structure), slow-breakdown (Type II structure) and unbreakable structures (Type III structure). Fast-breakdown and slow-breakdown structure were positively correlated with the content of amylose and shorter amylopectin branches. The content of longer amylopectin branches was positively correlated with the contribution of unbreakable structure.

Conclusion

The results indicated that cooked japonica rice varieties with more amylose and shorter amylopectin branches tend to form a harder texture and need more work to break down the fast and slow breakdown structures related to rice kernel fragmentation. Meanwhile, cooked japonica rice varieties possess stronger molecular entanglements due to their longer amylopectin branches and contribute more to the breakdown of unbreakable structures. These results can guide breeders to select rice varieties with desirable eating qualities for cultivation.

Impact of Cassava Starch Varieties on the Physiochemical Change during Enzymatic Hydrolysis

The enzymatic modification of starch extends its industrial use to flavor delivery and probiotic encapsulants, among other uses. However, it is not known how starch from different cassava varieties responds to enzymatic hydrolysis. Starches from two Ecuadorian cassava varieties (INIAP 650, an edible starch, and INIAP 651, an industrial starch) were partially modified at three enzymatic hydrolysis degrees (0%, 30%, and 50%), and their physicochemical properties were assessed. The structural analysis revealed that both varieties showed progressive structural damage as hydrolysis increases, probably due to exo-hydrolysis. However, deeper pores were observed in INIAP 651 with the SEM analysis. The crystallinity percentage obtained by XRD analyses remained constant in INIAP 651 and decreased (by 26%) in INIAP 650 (p < 0.05). In addition, the amylose−lipid complex index in INIAP 650 remained constant, while INIAP 651 increased (p < 0.05) at 30% hydrolysis (by 93%). In both varieties, hydrolysis increased (p < 0.05) the water holding capacity (WHC) (by 10−14%) and the water binding capacity (WBC) (by 16%), but 50% hydrolysis of INIAP 650 was needed to significantly affect these properties. No differences were observed in the varieties’ thermal properties. Regarding the rheological properties, the variety did not influence the changes in the storage module (G′) and the loss modulus (G″) with the hydrolysis (p > 0.05). However, the phase angle decreased significantly (p < 0.05) with the hydrolysis, being higher in the INIAP 650 variety than in the INIAP 651 variety. In general, the results indicate that the variety affects the response of the starch granule to enzymatic hydrolysis (noticeable in the principal component analysis, PCA) and opens up the possibility to modulate starch properties.

The Starch Physicochemical Properties between Superior and Inferior Grains of Japonica Rice under Panicle Nitrogen Fertilizer Determine the Difference in Eating Quality

Nitrogen fertilizer is essential for rice growth and development, and topdressing nitrogen fertilizer at panicle stage has a huge impact on rice grain quality. However, the effect of panicle nitrogen fertilizer (PNF) on starch physicochemical properties and fine structure remain unclear. In this study, four PNF levels (0, 60, 120, 180 kg N ha−1) were grown with the same basal and tiller fertilizer (150 kg N ha−1). The starch physicochemical properties, fine structure, texture properties and eating quality of two japonica rice were determined. We found that the content of total protein, crude fat and amylose between superior and inferior grains were significantly different. Compared with inferior grains, superior grains had low relative crystallinity, good pasting characteristics and outstanding eating quality. With the increase of nitrogen application rates, the starch volume mean diameter was lower; the average chain length of amylopectin was longer; and the relative crystallinity of starch was higher. The changes above in starch structure resulted in an increase in starch solubility, swelling power and gelatinization enthalpy, and led to a decrease in retrogradation enthalpy, retrogradation percentage and pasting viscosity, consequently contributing to the increase in hardness and stickiness of rice and the deterioration of taste value. These results indicated that topdressing PNF lengthened the amylopectin chain, decreased starch granule size, enhanced crystallization stability and increased gelatinization enthalpy, which were the direct reasons for the deterioration of cooking and eating quality.

Combined effects of starch fine molecular structures and water content on starch digestibility of cooked white rice

Although the starch digestibility of cooked white rice has been investigated with regard to its relation to starch structure, it is not yet clear how starch molecular structure and water content affect its digestion rate. To investigate this, the in vitro starch digestibility and molecular structure of 10 rice varieties with a range of rice-to-water cooking ratios were investigated. As expected, starch digestibility varied with different conditions. Typically, a higher amylose content resulted in a lower maximum digestion extent for a given water content. Having relatively more and longer amylopectin intermediate chains caused a slower starch digestion rate, but only with rice-to-water ratios between 1:1 and 1:1.2. These results could prove useful to find combinations of starch fine molecular structures and water contents to produce cooked rice with low glycemic index.

Testing the Linearity Assumption for Starch Structure-Property Relationships in Rices

Many properties of starch-containing foods are significantly statistically correlated with various structural parameters. The significance of a correlation is judged by the p-value, and this evaluation is based on the assumption of linear relationships between structural parameters and properties. We here examined the linearity assumption to see if it can be used to predict properties at conditions that are not close to those under which they were measured. For this we used both common domesticated rices (DRs) and Australian wild rices (AWRs), the latter having significantly different structural parameters and properties compared to DRs. The results showed that (1) the properties were controlled by more than just the amylopectin or amylose chain-length distributions or amylose content, other structural features also being important, (2) the linear model can predict the enthalpy ΔHg of both AWRs and DRs from the structural parameters to some extent but is often not accurate; it can predict the ΔHg of indica rices with acceptable accuracy from the chain length distribution and the amount of longer amylose chains (degree of polymerization > 500), and (3) the linear model can predict the stickiness of both AWRs and DRs to acceptable accuracy in terms of the amount of longer amylose chains. Thus, the commonly used linearity assumption for structure-property correlations needs to be regarded circumspectly if also used for quantitative prediction.

Combined effects of starch fine molecular structures and storage temperatures on long-term rice amylopectin retrogradation property

Though the retrogradation property as affected by starch fine molecular structures has been widely investigated, it remains largely unexplored how concurrent starch structures and storage conditions e.g. temperature tailor the starch retrogradation property. The amylopectin long-term retrogradation for 8 different rice starches with a broad range of amylose content was thus investigated under different storage temperatures. Results showed that gelatinized starch stored at -20 °C generally had a narrower melting temperature range from differential scanning calorimetry, while larger cells and thicker cell walls in the gel matrix than that stored at 4 °C. Different linear correlations were found between starch fine molecular structures and amylopectin retrogradation parameters when starch was stored under different temperatures. For example, the melting enthalpy of retrograded starch double helices was negatively correlated with the amount of amylose intermediate chains at 4 °C, while positively correlated with the relative length of amylopectin short chains at -20 °C. Under both temperatures, rice starch R250 had the highest retrogradation enthalpy. These results could help the rice industry improve both the nutritional and textural attributes of cooked rice by selecting starch with desirable molecular structures and optimizing the storage conditions for rice after cooking.

Relations between starch fine molecular structures with gelatinization property under different moisture content

Although gelatinization property has been intensively investigated with its relation to starch structures, how a combination of starch molecular structures and moisture content affect the gelatinization remains unclear. The gelatinization of six rice starches with a wide range of amylose content was investigated under different moisture content in this study. Results showed that starch gelatinization temperatures increased and biphasic endothermic peaks appeared over the decreased moisture content. For the first time, amylose content was shown to have a parabolic relationship with gelatinization temperatures. Distinct linear relations among starch fine molecular structures with gelatinization parameters were observed under different moisture contents, which suggested that amylose short chains were involved in the first endothermic peak, while interactions among amylose intermediate chains and relatively shorter amylopectin trans-lamellar chains dominantly contributed to the second endothermic peak when gelatinized under limited moisture content. These results help in better understanding of starch structure-gelatinization relation.

Heat-induced conversion of multiscale molecular structure of natural food nutrients: A review

Thermal process is the most important way of treating foods. Heat energy inputted into the natural food system induces the depolymerization of multi-scale structures of matrix, and causes the intramolecular and intermolecular interactions of different nutrients. It attacks and breaks the original polymeric molecule structures and the functional properties of macronutrients such as carbohydrates, proteins and lipids. Micronutrients such as vitamins and other novel functional ingredients are also thermally converted. The heat-induced conversions of nutrients are slightly or totally with discrepancy in simple-, simulated- and real-food systems, respectively. Thus, this review aims to extensively summarize the heat-induced structural characteristics, thermal conversion pathways and pyrolysis mechanism of nutrients both in simple and complex food matrices. The structural change of each nutrient and its thermal reaction kinetics depend on the molecule structure and polymeric characteristic of the unit substances in the system.

High Resistant Starch Rice: Variation in Starch Related SNPs, and Functional, and Sensory Properties

Human diets containing greater resistant starch (RS) are associated with superior glycemic control. Although high amylose rice has higher RS (29 g/kg to 44 g/kg) than lower amylose content varieties, sensory and processing properties associated with RS have not been evaluated. This study used variants of Waxy and starch synthase II a (SSIIa) genes to divide high amylose (256 g/kg to 284 g/kg) varieties into three haplotypes to examine their effects on RS, RVA parameters, and 14 cooked rice texture properties. RVA characteristics were influenced by both genes with peak and hotpaste viscosity differentiating the three haplotypes. Setback from hotpaste viscosity was the only RVA parameter correlated with RS content across three haplotypes (r = −0.76 to −0.93). Cooked rice texture attributes were impacted more by Waxy than by SSIIa with initial starch coating, roughness, and intact particles differentiating the three haplotypes. Pairwise correlation (r = 0.46) and PCA analyses suggested that roughness was the only texture attribute associated with RS content; while protein content influenced roughness (r = 0.49) and stickiness between grains (r = 0.45). In conclusion, variation exists among genetic haplotypes with high RS for sensory traits that will appeal to diverse consumers across the globe with limited concern for negatively affecting grain processing quality.

Align resistant starch structures from plant-based foods with human gut microbiome for personalized health promotion

Resistant starch (RS) is beneficial for human health through its interactions with gut microbiota. However, the alignment between RS structures with gut microbiota profile and consequentially health benefits remain elusive. This review summarizes current understanding of RS complex structures and their interactions with the gut microbiota, aiming to highlight the possibility of manipulating RS structures for a targeted and predictable gut microbiota shift for human health in a personalized way. Current definition of RS types is strongly associated with starch digestion behaviors in small intestine, which does not precisely reflect their interactions with human gut microbiota. Distinct alterations of gut microbiota could be associated with the same RS type. The principles to describe the specificity of different RS structural characteristics in terms of aligning with human gut microbiota shift was proposed in this review, which could result in new definitions of RS types from the microbial perspectives. To consider the highly variable personal features, a machine-learning algorithm to integrate different personalized factors and better understand the complex interaction between RS and gut microbiota and its effects on individual health was explained. This review contains important information to bring interactions between RS and gut microbiota to translational practice.

Effects of different moisture contents on the structure and properties of corn starch during extrusion

Herein, corn starch samples with different moisture contents (native corn starch, 30, 35, 40, 45, and 50%) were prepared by twin-screw extrusion, and the structural and physical properties were analyzed and correlated. Scanning electron microscopy observed the morphology, attenuated total reflection-Fourier transform infrared spectroscopy investigated the double helix structure, X-ray diffraction analyzed the crystal region, ion chromatography observed the chain length distribution, and rapid viscosity analyzer measured the viscosity of corn starch samples. We found that the corn starch crystallinity, degree of order, and double helix degree decreased with increasing moisture content. The moisture content has a crucial role in the peak viscosity, breakdown, final viscosity, and setback in pasting property experiments. With the increase in moisture content, the longer chain was transformed into a shorter chain, and the dispersion of molecular weight distribution continuously increased. This study provides a theoretical basis for the production of extruded corn starch.