A synergistic combination of shrimp shell derived chitosan polysaccharide with Citrus sinensis peel extract for the development of colourful and bioactive cellulosic textile

Bio-mordants: a review

Due to the increasing pressure on environmentally friendly approaches and sustainable production processes, the textile dyeing industry has focused on natural colorants. Thus, the use of bio-mordants, which are biological materials, has become widespread as an alternative to metal salts, most of which are non-ecological, used in the application processes of natural colorants. In natural dyeing, dyers want to use mordant substances in the dyeing processes in order to both expand the color spectrum and improve the fastness properties. Conventional metal salts used in natural dyeing are made up of metallic ions, which, when released into the environment as wastewater effluent at the end of the dyeing process, cause major damage to the ecosystem. Many researchers have thought about using mordants derived from natural sources to address the environmental problem. This article is a review of the investigation of natural mordants used instead of metallic mordants in the process of coloring various textile materials with natural dyestuff sources. It has been determined that many substances, most of them herbal materials, are used as mordants. In this review, mordants, except for conventional metal salts, are examined under three main groups for a better understanding. These groups are as follows: (i) natural or bio-mordants, (ii) oil mordants, and (iii) new-generation and non-vegetable-based mordants. Here, researchers will find an overview of the most recent developments in green mordants as well as application techniques for a variety of mordants.

Production of PVA-chitosan films using green synthesized ZnO NPs enriched with dragon fruit extract envisaging food packaging applications

In this work, the PVA-chitosan composite packaging films doped with biomass-fabricated zinc oxide nanoparticles (ZnO NPs) and dragon fruit waste extract (DFE) were developed for potential use in food packaging applications. ZnO NPs were synthesized using a sustainable method employing C. sinensis waste extract as a reducing agent. Chitosan and PVA were blended in a specific ratio (1: 1 w/w) to obtain a film-forming solution, into which the ZnO NPs and dragon fruit waste extract were incorporated. The resulting solution was cast into films, which were characterized using various analytical techniques. Mechanical properties, water solubility, and thermal stability of the films were also evaluated. The results demonstrated that the incorporation of green ZnO NPs and dragon fruit waste extract enhanced the mechanical strength and thermal stability of the films while reducing water vapor permeability. Moreover, the films exhibited biocidal and excellent 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging properties, indicating their use in the food packaging sector. The production of these films offers a practical approach to produce bioactive food packaging materials. The use of plant extract and waste material as reducing agents can reduce the overall cost of production while providing added benefits, such as antioxidant and antibacterial properties.

Cleaner pathway for developing bioactive textile materials using natural dyes: a review

Bioactive textile materials are a promising field in the development of functional textiles. The integration of bioactive compounds, such as natural dyes, into textiles offers a range of benefits, including UV protection, anti-microbial properties, and insect repellency. Natural dyes have been shown to have bioactivity, and their integration into textiles has been extensively studied. The application of natural dyes on textile substrates will be an advantage for their inherent functional properties along with their non-toxic and eco-friendly nature. This review addresses the effect of natural dyes on surface modification of most used natural and synthetic fibers and its subsequent effects on their anti-microbial, UV protection and insect repellent properties with natural dyes. Natural dyes have proved to be environmentally friendly in an attempt to improve bioactive functions in textile materials. This review provides a clear view of sustainable resources for the dyeing and finishing of textiles to develop a cleaner pathway of bioactive textiles using natural dyes. Furthermore, the dye source, advantages and disadvantages of natural dye, main dye component, and chemical structure are listed. However, there is still a need for interdisciplinary research to further optimize the integration of natural dyes into textiles and to improve their bioactivity, biocompatibility, and sustainability. The development of bioactive textile materials using natural dyes has the potential to revolutionize the textile industry and to provide a range of benefits to consumers and society.

Host-Guest Complexes HP-β-CD/Citrus Antioxidants: Exploratory Evaluations of Enhanced Properties in Biodegradable Film Packaging

The aim of this work was to exploit the antioxidant potential of molecules recovered during the pectin purification process of citrus lemon waste and to encapsulate them in stable pectin films, with a view to a green and circular economy process. Antioxidant molecules were recovered during the pectin purification process, further recovering matter from the waste. Seven molecules were identified and quantified, and the antioxidant power of the mixture and its stability over time was evaluated. To improve the stability of the bioactive fraction, this was complexed with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD); indeed, this procedure increased their thermal stability from 120 °C up to 250 °C, as verified by thermogravimetry. Furthermore, the most promising complexes were studied under autoclave-like conditions (120 °C, 28 min) to simulate thermal sterilization. The antioxidants and HP-β-CD were combined in a pectin film, showing increased stability over time (up to three times) compared to uncomplexed antioxidants. This process represents a first step towards the development of applicable devices for the delivery of antioxidant molecules.

Microbiologically Pure Cotton Fabrics Treated with Tetrabutylammonium OXONE as Mild Disinfection Agent

The microbiological purity of textiles plays a pivotal role in the use of textiles, especially in hospitals and other medical facilities. Microbiological purity of cotton fabric was achieved by a new disinfection method using tetrabutyloammonium OXONE (TBA-OXONE) before washing. As a result of the disinfection, the cotton fabric became microbiologically pure, despite the markedly decreased washing time with respect to the widely used standard procedure. Shortening of the washing time allowed for significant energy savings. In addition, the effect of the number of disinfection and washing cycles on the tensile properties and tearing force of the fabric was examined. After 120 disinfection and washing cycles the mechanical properties of cotton fabric were only slightly worsened.

Sustainable Dyeing and Functionalization of Different Fibers Using Orange Peel Extract’s Antioxidants

A diluted ethanol orange peel extract was used for sustainable dyeing and functionalization of different fabrics. The extract analysis was performed using UPLC-ESI-MS/MS; its total flavonoid (0.67 g RE/100 g d.w.) and antioxidant (2.81 g GAE/100 g d.w.) contents and antioxidant activity (IC50 of 65.5 µg/mL) were also determined. The extract dyeing performance at various dyebath pH values was evaluated using multifiber fabric. Among six fabrics, extract possessed the ability for dyeing wool, polyamide, and cellulose acetate (at pH 4.5), which color strength (K/S) values increased after washing (9.7–19.8 vs. 11.6–23.2). Extract:water ratio of 20:35 (v/v) was found to be sufficient for achieving satisfactory K/S values (i.e., 20.17, 12.56, and 10.38 for wool, polyamide, and cellulose acetate, respectively) that were slightly changed after washing. The optimal dyeing temperatures for wool, polyamide, and cellulose acetate are 55, 35, and 25 °C, while the equilibrium dye exhaustion at those temperatures was achieved after 45, 120, and 90 min, respectively. The color coordinate measurements revealed that wool and polyamide fabrics are yellower than cellulose acetate, while, compared to polyamide and cellulose acetate, wool is redder. Possible interactions between selected fabrics and extract compounds are suggested. All fabrics possessed excellent antioxidant activity (88.6–99.6%) both before and after washing. Cellulose acetate provided maximum bacterial reduction (99.99%) for Escherichia coli, and Staphylococcus aureus, which in the case of Staphylococcus aureus remained unchanged after washing. Orange peel extract could be used for simultaneous dyeing and functionalization of wool and polyamide (excellent antioxidant activity) and cellulose acetate (excellent antioxidant and antibacterial activity) fabrics.

Chemical elucidation and rheological properties of a pectic polysaccharide extracted from Citrus medica L. fruit residues by gradient ethanol precipitation

Citron (Citrus. medica L.) fruits are commonly utilized in the production of essential oil, therefore, the fruits residues turn out to be industrial byproducts. In the present study, a crude polysaccharide was extracted from citron fruit residues by hot water extraction and precipitation of ethanol (95%), after deproteinization, a major polysaccharide component (CMLP-2) was obtained by gradient ethanol precipitation (20%-80%). The physicochemical properties of CMLP-2 such as surface morphology, functional groups, and thermostability were examined by FT-IR spectroscopy, SEM, and thermogravimetric analysis. Moreover, the chemical structure of CMLP-2 was elucidated that CMLP-2 is an acidic pectic polysaccharide consisting of arabinose (Ara), galacturonic acid (GalA), and rhamnose (Rha) in a molar ratio of 4:2:1 with a molecular weight of 202.18 kDa. CMLP-2 is a novel pectic polysaccharide rich in rhamnogalacturonan I (RG-I). Moreover, rheological tests revealed that CMLP-2 solution is pseudoplastic and temperature resistant. The result could be a good basis for the utilization of Citrus medica L. fruits residues as plant-derived food additive.

Fabrication and characterization of an economical active packaging film based on chitosan incorporated with pomegranate peel

Antioxidant and antimicrobial chitosan (CS) films incorporated with different concentrations (0, 3, 6 and 9% w/w based on chitosan) of pomegranate peel powder (PPP) were prepared through a simple and low-cost process and characterized. The physicochemical property, antioxidant and antibacterial properties of the films were investigated. Results showed that incorporation with PPP increased the thickness, water solubility (WS), water vapor permeability (WVP), opacity and total phenolic content (TPC) of chitosan films, but decreased the moisture content (MC) and mechanical property. Fourier transform infrared (FTIR) spectroscopy indicated the formation of hydrogen bonds between chitosan and PPP. In addition, scanning electron microscopy (SEM) analysis presented that microstructural attributes of chitosan film changed by enriching with pomegranate peel. The films with concentrations of PPP at 6 and 9% presented great ultraviolet-visible light barrier properties. Moreover, the antioxidant ability of films with PPP was significantly increased compared to the chitosan film. The addition of PPP also promoted the antibacterial capacity of the control film. These results revealed that incorporation of PPP in chitosan film could fabricate an economical active film with antioxidant and antibacterial properties, and which had the potential for developing food-grade packaging material.

Highly efficient and durable antibacterial cotton fabrics finished with zwitterionic polysulfobetaine by one-step eco-friendly strategy

In this work, a novel formulation of polysulfobetaine, poly (sulfobetaine-acrylamide-allyl glycidyl ether) (PSPB-AM-AGE), was synthesized and grafted onto cotton. The synthesis of PSPB-AM-AGE and its grafting on the cotton fabrics were confirmed by FTIR, XPS and SEM. The PSPB-AM-AGE treated cotton fabrics exhibited a high level of antibacterial rate against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which are 95.18% and 98.74%, separately, as well as a good laundry durability. The mechanical tests showed that the essential cotton properties can be largely preserved in the treatment process. Moreover, the hydrophilicity, air and water permeability of the cotton were improved after treated with PSPB-AM-AGE, indicating a better wearing comfort performance. The whiteness of the cotton fabrics did not decrease significantly. The safety evaluation demonstrated that PSPB-AM-AGE had no cytotoxicity. The developed antibacterial finishing introduced a new method to apply polysulfobetaine interfaced on cellulose, providing great potential for biomedical fabric application.