Synthesis of a hydrogel by grafting of acrylamide-co-sodium methacrylate onto chitosan for effective adsorption of Fuchsin basic dye

Fabrication of carboxymethyl cellulose/graphene oxide/ZnO composite hydrogel for efficient removal of fuchsin dye from aqueous media

Hydrogels are hydrophilic, insoluble, and highly porous 3D networks capable of absorbing large amounts of water. This study aimed to develop a carboxymethyl cellulose/graphene oxide (CMC/GO) hydrogel, cross-linked with citric acid and modified with zinc oxide (ZnO) nanoparticles (CMC/GO/ZnO), synthesized via the sol-gel method. The formulated composite hydrogel samples were characterized by Fourier transmittance infrared spectroscopy (FTIR), scanning electron microscopy (SEM) analysis, X-ray diffraction (XRD), transmission electron microscopy (TEM), and thermo-gravimetric analysis (TGA). The hydrogels were tested for the adsorption of basic fuchsin (BF) dye from the aqueous medium under various conditions, such as adsorbent dosage, contact time, pH, and temperature, using batch adsorption. The adsorption data best fit the Langmuir and Temkin models, with maximum adsorption capacity (qmax) of 172.41 mg/g for CMC/GO and 303.03 mg/g for CMC/GO/ZnO. Optimal adsorption occurred at pH = 6 and within 30 min. The process followed a pseudo-second-order kinetic model, and thermodynamic results indicated that the adsorption process is physical, endothermic and spontaneous. The COOH groups in the hydrogels enhanced affinity for cationic dyes through hydrogen bonding and electrostatic interactions. Thus, CMC/GO and CMC/GO/ZnO hydrogels are efficient and promising adsorbents for environmental remediation.

Highly effective removal of basic fuchsin dye using carboxymethyl konjac glucomannan grafted acrylic acid-acrylamide/montmorillonite composite hydrogel

This study developed a nanocomposite hydrogel, CAM4-MMT, for efficiently removing basic fuchsin dye from water. The hydrogel was prepared by grafting a copolymer of acrylic acid (AA) and acrylamide (AM) onto carboxymethyl konjac glucomannan (CMKGM), and doped with montmorillonite (MMT), exhibited excellent thermal stability, a porous inner structure, large specific surface area (1.407 m2/g), and high swelling capacity (107.3 g/g). The hydrogel achieved a maximum adsorption capacity of 694.1 mg/g and a removal rate of 99.5 %. The Langmuir isotherm and pseudo-second-order kinetic model best described the adsorption process. Regeneration and reuse tests confirmed that the hydrogel has excellent recyclability. In conclusion, the CAM4-MMT composite hydrogel efficiently removed basic fuchsin from water solutions, offering a new scheme for eliminating basic fuchsin using natural polysaccharides with promising applications.

Natural Polysaccharide-Based Hydrogels Used for Dye Removal

Removal of contaminants from discharge water is vital and demands urgent assistance with the goal to keep clean water. Adsorption is one of the most common, efficient, and low-priced methods used in water treatment. Various polysaccharide-based gels have been used as efficient dye adsorbents from wastewater. This review summarizes cutting-edge research of the last decade of different hydrogels based on natural polysaccharides (chitin, chitosan, cellulose, starch, pullulan, and dextran) concerning their dye adsorption efficiency. Beyond their natural abundance, attributes of polysaccharides such as biocompatibility, biodegradability, and low cost make them not only efficient, but also environmentally sustainable candidates for water purification. The synthesis and dye removal performance together with the effect of diverse factors on gels retaining ability, kinetic, and isotherm models encountered in adsorption studies, are introduced. Thermodynamic parameters, sorbent recycling capacity along with conclusions and future prospects are also presented.

Synthesis of Poly(GG-co-AAm-co-MAA), a Terpolymer Hydrogel for the Removal of Methyl Violet and Fuchsin Basic Dyes from Aqueous Solution

A novel adsorbent designated as terpolymer hydrogel (gellan gum-co-acrylamide-co-methacrylic acid) was prepared by free radical polymerization of gellan gum (GG), methacrylic acid (MAA), and acrylamide (AAm) using N,N-methylene bis-acrylamide (MBA) as cross-linker and ammonium per sulfate (APS) as the initiator of the reaction. The synthesized gel was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and thermogravimetric analysis (TGA) and was used for the adsorptive removal of methyl violet (MV) and Fuchsin Basic (FB) dyes from aqueous solution. The effect of temperature, contact time, pH, and concentration on them under the study adsorption process was evaluated. Freundlich isotherm and pseudo-second-order kinetic models were found to be best in fitting the isothermal and kinetics data. The water diffusion and % swelling of hydrogel were studied at various pH in distilled water and at neutral pH in tap water. The diffusion was found to be of Fickian type with a maximum swelling of 5132%. The maximum adsorption capacity was 233 mg/g against MV and 200 mg/g against FB dyes. The swelling and adsorption were pH dependent and increased with increase in pH. The enthalpy, Gibbs free energy, and entropy changes of adsorption for both the dyes indicated the adsorption process to be exothermic, feasible, and spontaneous. The hydrogel was successfully regenerated using acetone and distilled water for five cycles and still, its dye removal efficiency was 80% of its original value. The poly(GG-co-AAm-co-MAA) hydrogel successfully removed the selected dyes from water and could thus be used as an efficient alternative sorbent for cationic dye removal from aqueous solutions.

Sustainable aerogels based on biobased poly (itaconic acid) for adsorption of cationic dyes

This work reports the synthesis of poly (itaconic acid) by thermal polymerization mediated by 2,2'-Azobis(2-methylpropionamidine) dihydrochloride. Furthermore, physical hydrogels were prepared by using high molecular weight poly (itaconic acid) characterized by low dispersity and laponite RD. The hydrogels presented porous 3D network structures, with a high-water penetration of almost 2000 g/g of swelling ratio, which can allow the adsorption sites of both poly (itaconic acid) and laponite RD to be easily exposed and facilitate the adsorption of dyes. The water adsorption followed Schott's pseudo-second-order model. The mechanism of the adsorption process was investigated using 1H and 31P NMR. The hydrogel is able to fast adsorb by a combination of electrostatic interactions and hydrogen bonding by the synergic effect of the clay and poly (itaconic acid). Moreover, the prepared aerogels exhibited a fast removal of Basic Fuchsin, with an adsorption capacity of 67.56 mg/g and a high removal efficiency (~99 %). The adsorption followed the pseudo-second-order kinetic model and Langmuir isotherm model. Furthermore, the thermodynamic parameters showed that the BF process of adsorption was spontaneous and feasible, endothermic, and followed physisorption. These results indicated that the PIA/laponite-based aerogel can be considered a promising adsorbent material in textile wastewater treatment.

Targeted elimination of molybdenum ions from a leaching solution with the ability of radiated grafting GMA-PAN nanofibers

In this study, electrospun polyacrylonitrile nanofibers were effectively functionalized for enhanced molybdenum ion adsorption through a multi-step approach. Initially, glycidyl methacrylate was grafted onto the nanofibers via irradiation-induced grafting polymerization, followed by chemical modification with various amino groups, with triethylamine identified as the optimal modifier. The impacts of key synthesis parameters and reaction conditions on grafting level and adsorption capacity were thoroughly investigated, with a focus on achieving maximum efficiency. The resulting nanofibers were characterized using FTIR, SEM, and BET techniques, confirming the successful modification and structural features conducive to adsorption. Furthermore, a comprehensive experimental design, incorporating a central composite design, yielded optimal conditions for molybdenum adsorption, with key parameters including monomer concentration, irradiation dose, adsorbent mass, initial concentration, time, pH, temperature, and amine concentration. The adsorption kinetics were effectively described by the pseudo-second-order model, while the Langmuir isotherm model provided valuable insight into the adsorption behavior. Impressively, the adsorbent exhibited exceptional adsorption efficiency, surpassing 98% even after six adsorption-desorption cycles using 0.5 M HCl. Thermodynamic analysis revealed the exothermic nature of the adsorption process, along with decreased entropy and overall spontaneity, underlining the favorable conditions for molybdenum adsorption. Notably, the synthesized adsorbent demonstrated notable selectivity for molybdenum and achieved an impressive adsorption capacity of 109.79 mg/g, highlighting its potential for practical applications in molybdenum removal from aqueous solutions.

Advanced Hydrogel-Based Strategies for Enhanced Bone and Cartilage Regeneration: A Comprehensive Review

Bone and cartilage tissue play multiple roles in the organism, including kinematic support, protection of organs, and hematopoiesis. Bone and, above all, cartilaginous tissues present an inherently limited capacity for self-regeneration. The increasing prevalence of disorders affecting these crucial tissues, such as bone fractures, bone metastases, osteoporosis, or osteoarthritis, underscores the urgent imperative to investigate therapeutic strategies capable of effectively addressing the challenges associated with their degeneration and damage. In this context, the emerging field of tissue engineering and regenerative medicine (TERM) has made important contributions through the development of advanced hydrogels. These crosslinked three-dimensional networks can retain substantial amounts of water, thus mimicking the natural extracellular matrix (ECM). Hydrogels exhibit exceptional biocompatibility, customizable mechanical properties, and the ability to encapsulate bioactive molecules and cells. In addition, they can be meticulously tailored to the specific needs of each patient, providing a promising alternative to conventional surgical procedures and reducing the risk of subsequent adverse reactions. However, some issues need to be addressed, such as lack of mechanical strength, inconsistent properties, and low-cell viability. This review describes the structure and regeneration of bone and cartilage tissue. Then, we present an overview of hydrogels, including their classification, synthesis, and biomedical applications. Following this, we review the most relevant and recent advanced hydrogels in TERM for bone and cartilage tissue regeneration.

Removal of crystal violet dye using a three-dimensional network of date pits powder/sodium alginate hydrogel beads: Experimental optimization and DFT calculation

Biodegradable and very low-cost adsorbent beads were prepared from date pits powder (DP) and sodium alginate (SA). DP to SA ratios was varied (1/2, 1/4 and 1/6) and used to eliminate Crystal violet (CV) a cationic dye. Adsorbents were characterized by FTIR, SEM-EDS, UV-vis DR, TGA and the point of zero charge (pHPZC). The optimal composite beads SA@6DP show high adsorption capacities of 83.565 mg/g toward CV than SA@2DP and SA@4DP. The kinetics investigation showed that the adsorption is well described by the pseudo-second-order kinetic (R2 = 0.998). The thermodynamics and isotherms studies exhibit that the adsorption phenomenon for SA@6DP adsorbent is endothermic and significantly fitted with the Redlich-Peterson model. The experimental adsorption tests were optimized by the Box-Behnken design (BBD) which led to conclude the maximal CV removal efficiency achieved by SA@6DP was 99.873 % using [CV] = 50 mg/L, adsorbent mass = 20 mg and 48 h of contact time. The theoretical calculation proved that the CV molecules favor the mode of attack due to their electrophilic character and can accept the SA@6DP adsorbent electrons more easily to form an anti-bonding orbital. SA@6DP hydrogel beads are therefore an exceptional bio-adsorbent that offers excellent adsorption performance.

The study of the removal of penconazole fungicide from surface water using carboxymethyl tragacanth-based hydrogel grafted with poly (acrylic acid-co-acrylamide)

In this study, a polymeric adsorbent based on carboxymethyl tragacanth (CMT) grafted by poly acrylic acid-co-acrylamide (AAc-co-AAm) synthesized by radical polymerization for the first time was used to remove the fungicide penconazole (PEN) or Topas 20% from surface water. The parameters of solution pH, adsorption isotherm, and adsorption kinetics of PEN were studied by the synthetic adsorbent. The surface morphology and functional groups of CMT-g-poly (AAc-co-AAm) were confirmed by XRD, SEM and FT-IR techniques. Adsorption of PEN on CMT-g-poly (AAc-co-AAm) follows the Freundlich and pseudo-second-order models. The significant maximum adsorption capacity of the synthesized polymer was found to be 196.08 mg/g. The synthetic adsorbent had good reproducibility in PEN removal for up to 5 cycles. CMT-g-poly (AAc-co-AAm) is a cost-effective and non-toxic adsorbent for the decontamination of surface water from pesticides.

Evaluation of Poly(vinyl alcohol)-Xanthan Gum Hydrogels Loaded with Neomycin Sulfate as Systems for Drug Delivery

In recent years, multidrug-resistant bacteria have developed the ability to resist multiple antibiotics, limiting the available options for effective treatment. Raising awareness and providing education on the appropriate use of antibiotics, as well as improving infection control measures in healthcare facilities, are crucial steps to address the healthcare crisis. Further, innovative approaches must be adopted to develop novel drug delivery systems using polymeric matrices as carriers and support to efficiently combat such multidrug-resistant bacteria and thus promote wound healing. In this context, the current work describes the use of two biocompatible and non-toxic polymers, poly(vinyl alcohol) (PVA) and xanthan gum (XG), to achieve hydrogel networks through cross-linking by oxalic acid following the freezing/thawing procedure. PVA/XG-80/20 hydrogels were loaded with different quantities of neomycin sulfate to create promising low-class topical antibacterial formulations with enhanced antimicrobial effects. The inclusion of neomycin sulfate in the hydrogels is intended to impart them with powerful antimicrobial properties, thereby facilitating the development of exceptionally efficient topical antibacterial formulations. Thus, incorporating higher quantities of neomycin sulfate in the PVA/XG-80/20-2 and PVA/XG-80/20-3 formulations yielded promising cycling characteristics. These formulations exhibited outstanding removal efficiency, exceeding 80% even after five cycles, indicating remarkable and consistent adsorption performance with repeated use. Furthermore, both PVA/XG-80/20-2 and PVA/XG-80/20-3 formulations outperformed the drug-free sample, PVA/XG-80/20, demonstrating a significant enhancement in maximum compressive stress.

Removal of dyes from water using Citrullus lanatus seed powder in continuous and discontinuous systems

The objective of this study is to develop a low-cost biosorbent using residual seeds of the Citrullus lanatus fruit for the removal of cationic dyes. Physicochemical parameters such as pH, adsorbent mass, contact time, and temperature were evaluated for their effects on dye removal. The biosorbent is composed of lignin and cellulose, exhibiting a highly heterogeneous surface with randomly distributed cavities and bulges. The adsorption of both dyes was most effective at natural pH with a dosage of 0.8 g L-1. Equilibrium was reached within 120 min, regardless of concentration, indicating rapid kinetics. The Elovich model and pseudo-second-order kinetics were observed for crystal violet and basic fuchsin dye, respectively. The Langmuir model fitted well with the equilibrium data of both dyes. However, the increased temperature had a negative impact on dye adsorption. The biosorbent also demonstrated satisfactory performance (R = 43%) against a synthetic mixture of dyes and inorganic salts, with a small mass transfer zone. The adsorption capacities for crystal violet and basic fuchsin dye were 48.13 mg g-1 and 44.26 mg g-1, respectively. Thermodynamic studies confirmed an exothermic nature of adsorption. Overall, this low-cost biosorbent showed potential for the removal of dyes from aqueous solutions.

Fabrication, Characterization, and Antioxidant Potential of Sodium Alginate/Acacia Gum Hydrogel-Based Films Loaded with Cinnamon Essential Oil

Several studies have reported the advantages of incorporating essential oils in hydrogel-based films for improving their physiochemical and antioxidant attributes. Cinnamon essential oil (CEO) has great potential in industrial and medicinal applications as an antimicrobial and antioxidant agent. The present study aimed to develop sodium alginate (SA) and acacia gum (AG) hydrogel-based films loaded with CEO. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), and texture analysis (TA) were performed to analyze the structural, crystalline, chemical, thermal, and mechanical behaviour of the edible films that were loaded with CEO. Moreover, the transparency, thickness, barrier, thermal, and color parameters of the prepared hydrogel-based films loaded with CEO were also assessed. The study revealed that as the concentration of oil in the films was raised, the thickness and elongation at break (EAB) increased, while transparency, tensile strength (TS), water vapor permeability (WVP), and moisture content (MC) decreased. As the concentration of CEO increased, the hydrogel-based films demonstrated a significant improvement in their antioxidant properties. Incorporating CEO into the SA-AG composite edible films presents a promising strategy for producing hydrogel-based films with the potential to serve as food packaging materials.

Development of a chitosan derivative bearing the thiadiazole moiety and evaluation of its antifungal and larvicidal efficacy

A new chitosan derivative bearing a new thiadiazole compound was developed, and its antifungal and larvicidal activities were investigated. The chitosan derivative (coded here as PTDz-Cs) was synthesized by the reaction between the carboxylic derivative of the thiadiazole moiety and chitosan. Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H/13C-NMR), gas chromatography–mass spectrometry (GC–MS), elemental analysis, X-Ray diffraction (XRD), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS) were used to characterize the developed derivatives. Compared to chitosan, the PTDz-Cs derivative has a less crystalline structure and less thermal stability. The antifungal results revealed that PTDz-Cs exhibited potential activity against Rhizopus microspores, Mucor racemosus, Lichtheimia corymbifera, and Syncephalastrum racemosum where inhibition zones were 17.76, 20.1, 38.2, and 18.3 mm, respectively. The larvicidal efficacy of the PTDz-Cs derivative against A. stephensi larvae was tested, and the results exposed that the LC50 and LC90 values (first instar) were 5.432 and 10.398 ppm, respectively, indicating the high susceptibility of early instar mosquito larvae to PTDz-Cs. These results emphasize that this study provided a new chitosan derivative that could be potentially used in the biomedical fields.

Polymeric DNA Hydrogels and Their Applications in Drug Delivery for Cancer Therapy

The biomolecule deoxyribonucleic acid (DNA), which acts as the carrier of genetic information, is also regarded as a block copolymer for the construction of biomaterials. DNA hydrogels, composed of three-dimensional networks of DNA chains, have received considerable attention as a promising biomaterial due to their good biocompatibility and biodegradability. DNA hydrogels with specific functions can be prepared via assembly of various functional sequences containing DNA modules. In recent years, DNA hydrogels have been widely used for drug delivery, particularly in cancer therapy. Benefiting from the sequence programmability and molecular recognition ability of DNA molecules, DNA hydrogels prepared using functional DNA modules can achieve efficient loading of anti-cancer drugs and integration of specific DNA sequences with cancer therapeutic effects, thus achieving targeted drug delivery and controlled drug release, which are conducive to cancer therapy. In this review, we summarized the assembly strategies for the preparation of DNA hydrogels on the basis of branched DNA modules, hybrid chain reaction (HCR)-synthesized DNA networks and rolling circle amplification (RCA)-produced DNA chains, respectively. The application of DNA hydrogels as drug delivery carriers in cancer therapy has been discussed. Finally, the future development directions of DNA hydrogels in cancer therapy are prospected.

Polysaccharide-Based Composite Hydrogels as Sustainable Materials for Removal of Pollutants from Wastewater

Nowadays, pollution has become the main bottleneck towards sustainable technological development due to its detrimental implications in human and ecosystem health. Removal of pollutants from the surrounding environment is a hot research area worldwide; diverse technologies and materials are being continuously developed. To this end, bio-based composite hydrogels as sorbents have received extensive attention in recent years because of advantages such as high adsorptive capacity, controllable mechanical properties, cost effectiveness, and potential for upscaling in continuous flow installations. In this review, we aim to provide an up-to-date analysis of the literature on recent accomplishments in the design of polysaccharide-based composite hydrogels for removal of heavy metal ions, dyes, and oxyanions from wastewater. The correlation between the constituent polysaccharides (chitosan, cellulose, alginate, starch, pectin, pullulan, xanthan, salecan, etc.), engineered composition (presence of other organic and/or inorganic components), and sorption conditions on the removal performance of addressed pollutants will be carefully scrutinized. Particular attention will be paid to the sustainability aspects in the selected studies, particularly to composite selectivity and reusability, as well as to their use in fixed-bed columns and real wastewater applications.

Safranin-O cationic dye removal from wastewater using carboxymethyl cellulose-grafted-poly(acrylic acid-co-itaconic acid) nanocomposite hydrogel

Copolymer of acrylic acid (AA) and itaconic acid (IA) grafted onto sodium carboxymethyl cellulose hydrogel (CMC-g-poly (AA-co-IA)) was successfully synthesized as an adsorbent to remove safranin-O from wastewater. The swelling and removal efficiencies of CMC-g-poly (AA-co-IA) were enhanced by increasing IA/AA molar ratio as well as by incorporation of montmorillonite clay nano-sheets (MMT). The surface area of MMT, CMC-g-poly (AA-co-IA), and CMC-g-poly (AA-co-IA) samples was 15.632, 0.61452, and 0.66584 m²/g, respectively, indicating the effectiveness of MMT nano-sheets in improving hydrogel surface area. The maximum removal efficiency of CMC-g-poly (AA-co-IA)/MMT under optimum conditions i.e., pH of 8, initial concentration of 10 mg/L, adsorbent dose of 2 g/L, and contact time of 40 min was ascertained 99.78% using a response surface methodology-central composite design (RSM-CCD). Pseudo-second-order and Langmuir models giving the maximum monolayer adsorption capacity of 18.5185 mg/g and 19.1205 mg/g for CMC-g-poly (AA-co-IA) and CMC-g-poly (AA-co-IA)/MMT samples, respectively are the best-fitted models for kinetic and equilibrium data. Thermodynamically, safranin-O decontamination was spontaneous, exothermic, and entropy decreasing. Moreover, ad (de)sorption behavior study showed that CMC-g-poly (AA-co-IA)/MMT performance was not changed after multiple recovery steps. Therefore, CMC-g-poly (AA-co-IA)/MMT was considered as a highly potential adsorbent for safranin-O removal from wastewater.

Adsorption of basic fuchsin using soybean straw hydrolyzed by subcritical water

The valorization of agro-industrial residues can be improved through their full use, making the production of second-generation ethanol viable. In this scenario, hydrolyzed soybean straw generated from a subcritical water process was applied to the basic fuchsin adsorption. At pH eight, a high adsorption capacity was obtained. The mass test results showed that basic fuchsin's removal and adsorption capacity could be maximized with an adsorbent dosage of 0.9 g L-1. The linear driving force model was suitable for predicting the kinetic profile, and the kinetic curves showed that equilibrium was reached with only 30 min of contact time. Besides, the Langmuir model was the best to predict the adsorption isotherms. The thermodynamic parameters revealed a spontaneous and endothermic process. At 328 K, there is maximum adsorption capacity (72.9 mg g-1). Therefore, it can be stated that this material could be competitive in terms of adsorption capacity coupled with the idea of full use of waste.

Preparation and characterization of starch-cellulose interpenetrating network hydrogels based on sequential Diels-Alder click reaction and photopolymerization

Herein, starch-cellulose interpenetrating network (IPN) hydrogels were fabricated by sequential Diels-Alder click reaction and photopolymerization in water. Moreover, β-cyclodextrin, a commonly used host molecule in supramolecular chemistry, was also introduced to improve the performance of the IPN hydrogel. Firstly, the starch-based dienes were synthesized by modifying starch with N-maleoyl-β-alanine, and the cellulose-based dienophiles were obtained by the reaction of cellulose and furfurylamide succinate; Secondly, the as-synthesized starch-based dienes, cellulose-based dienophiles, polymerizable β-cyclodextrin, crosslinker, and acrylamide were dissolved in water and obtained a transparent solution. The solution was maintained in a water bath of 50 °C for 3 h, forming the first network via catalyst-free click Diels-Alder reaction, subsequently, the second network was formed by photopolymerization. Their preparation conditions were optimized via one-factor experiments and their properties and structures were characterized. Finally, 5- fluorouracil (5-Fu) was used as a model drug to study the sustained release behavior of the drug-loaded hydrogels. Release profile was found to fit in Ritger-Peppas kinetic model and polymer relaxation and drug diffusion made a valuable contribution to drug release. Taking into account the virtues of easily controllable photopolymerization and catalyst-free Diels-Alder reaction, the strategy described here has a potential application in the preparation of IPN hydrogels.

Removal of carbol fuchsin from aqueous solution by using three-dimensional porous, economic, and eco-friendly polymer

In this study, a three-dimensional (3D) porous polydimethylsiloxane (PDMS) was prepared using a cheap material with a highly simple and different method. PDMS was firstly applied for the removal of carbol fuchsin (CF) cationic organic dye pollution in this study. Besides, the adsorption capacity of 3D PDMS for removal of the CF was found quite high compared to other materials in already published results. The synthesized PDMS was characterized using several spectroscopic and imaging techniques such as FTIR, Raman, SEM, stereomicroscope, EDX, UV/Vis, and TGA. The optimal conditions were found as 10 mg L^-1 initial concentration, 20 mg of adsorbent dose, 2 h contact time, pH 10, and 25°C temperature. The removal % of CF and the maximum adsorption capacity were calculated at approximately 89% and 88.8 mg g^-1 , respectively. Furthermore, the equilibrium studies showed that the Langmuir isotherm model fitted well with the removal of CF. Moreover, according to the kinetic results, the second-order kinetic model was found suitable (q_e,cal 89.3 mg g^-1 and q_e,exp 88.8 mg g^-1 close to each other) for the adsorption of CF. Also, the thermodynamic studies indicated that adsorption occurs spontaneously, and the adsorption process was physical adsorption. Besides, the reusability of the adsorbent was studied. PRACTITIONER POINTS: Water treatment technology should be low cost, economically viable and in the meantime, eco-friendly. The 3D porous PDMS was prepared by using cheap material with a highly simple method and eco-friendly This unique material was firstly applied for the removal of organic dye in water in this study.

Methylene blue uptake by gum arabic/acrylic amide/3-allyloxy-2-hydroxy-1-propanesulfonic acid sodium salt semi-IPN hydrogel

In this study, the capacity of methylene blue (MB) uptake from aqueous solution was investigated using acrylic amide-co-3-Allyloxy-2-hydroxy-1-propanesulfonic acid sodium salt/Gum Arabic semi-IPN hydrogel. The semi-IPN hydrogels were prepared by the classical free radical solution technique. The swelling experiments were carried out gravimetrically and the swelling kinetics parameters were calculated. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) confirmed the semi-IPN hydrogel formation. The MB uptake was studied by the batch technique and the impact of different conditions was investigated. It was found that the obtained semi-IPN hydrogels gave adsorption capacity for the dye within a range of 101-187 mg g^-1 at the initial dye concentration of 100 mg/L. The adsorption kinetics (pseudo-first-order and pseudo-second-order) and the adsorption isotherms (Langmuir, Freundlich, and Temkin equations) were tested and the adsorption data was well described by the pseudo-second-order and Freundlich models, respectively. The maximum adsorption capacity calculated by the Langmuir model (R² = 0.8718) was 655.2 mg g^-1. The thermodynamic study indicated the spontaneity and the endothermic nature of MB adsorption. Furthermore, the usability study showed that the prepared adsorbents could be employed repeatedly for successive 5 cycles of adsorption and desorption.

Chitosan-based hybrid materials for adsorptive removal of dyes and underlying interaction mechanisms

Environmental pollution by dyes molecules has become a subject of intensive research in recent years due to their hazardous effects on human health, organisms, and animals. Effective treatment and removal of dye molecules from the environmental matrices and water sources are of supreme concern. The deployment of cheap, safe, green, sustainable, and eco-friendly materials to remove these pollutants from water is the main challenge during the last decades. Chitosan and its derivatives/composites, as a cheap, easily available, and environmentally friendly sorbent, have attracted increasing attention for the removal of dye molecules. This review article focuses on the application of chitosan and chitosan-based smart adsorbents for the removal of dyes. Recent methods for the preparation of chitosan-based composites and their application in the removal of dyes are discussed. Moreover, the possible mechanisms for the interaction of chitosan and chitosan-based adsorbents with dyes molecules were evaluated. Finally, future prospects of using chitosan as an adsorbent for the removal of dye molecules are directed.

Hybrid Silica Materials Applied for Fuchsine B Color Removal from Wastewaters

Hybrid materials, with applications in fuchsine B color removal from wastewaters, were obtained by in situ incorporation of platinum nanoparticles and/or Pt-porphyrin derivatives into silica matrices. The inorganic silica matrices were synthesized by the sol-gel method, conducted in acid-base catalysis in two steps and further characterized by Nitrogen porosimetry, Small Angle Neutron Scattering (SANS), Scanning electron microscopy, Atomic force microscopy and UV-vis spectroscopy. All of the investigated silica hybrid materials were 100% efficient in removing fuchsine B if concentrations were lower than 1 × 10^-5 M. For higher concentrations, the silica matrices containing platinum, either modified with Pt-metalloporphyrin or with platinum nanoparticles (PtNPs), are the most efficient materials for fuchsine B adsorption from wastewaters. It can be concluded that the presence of the platinum facilitates chemical interactions with the dye molecule through its amine functional groups. An excellent performance of 197.28 mg fuchsine B/g adsorbent material, in good agreement with the best values mentioned in literature, was achieved by PtNPs-silica material, capable of removing the dye from solutions of 5 × 10^-4 M, even in still conditions.

Recyclable magnetic chitosan microspheres with good ability of removing cationic dyes from aqueous solutions

Sr_3.8Fe_25.7O_70.4-chitosan magnetic microparticles (Sr_3.8Fe_25.7O_70.4-CMNs) with a core-shell structure were synthesized, characterized and applied for the removal of two model cationic dyes. The results showed that these magnetic microparticles possess fast adsorption rate and high adsorption efficiency for both crystal violet (CV) and basic red 9 (BR9) at a temperature ranging 30 °C to 40 °C and suitable pH range (pH ≥ 7). The maximum removal efficiency for CV and BR9 attained to 94.5% and 97.5% in 30 min, which was significantly faster and higher than that of chitosan (<50% in 60 min) (P<0.01). And its maximum adsorption capacity for CV and BR9 reached 29.46 mg/g and 32.16 mg/g, respectively. The adsorption process of Sr_3.8Fe_25.7O_70.4-CMNs follows the Langmuir isotherm with a high correlation coefficient (R² > 0.97) and the pseudo-second-order model. Additionally, the synthesized Sr_3.8Fe_25.7O_70.4-CMNs were easy to regeneration and reuse, and the removal rate remained above 90% after 5 recycle times. This study would provide a new more environmental friendly material and method for the treatment of wastewater containing toxic dyes.

A review on the synthesis of graft copolymers of chitosan and their potential applications

Chitosan is an antimicrobial, biodegradable and biocompatible natural polymer, commercially derived from the partial deacetylation of chitin. Currently modified chitosan has occupied a major part of scientific research. Modified chitosan has excellent biotic characteristics like biodegradation, antibacterial, immunological, metal-binding and metal adsorption capacity and wound-healing ability. Chitosan is an excellent candidate for drug delivery, food packaging and wastewater treatment and is also used as a supporting object for cell culture, gene delivery and tissue engineering. Modification of pure chitosan via grafting improves the native properties of chitosan. Chitosan grafted copolymers exhibit high significance and are extensively used in numerous fields. In this review, modifications of chitosan through several graft copolymerization techniques such as free radical, radiation, and enzymatic were reported and the properties of grafted chitosan were discussed. This review also discussed the applications of grafted chitosan in the fields of drug delivery, food packaging, antimicrobial, and metal adsorption as well as dye removal.