Efficient antibacterial dextran-montmorillonite composite sponge for rapid hemostasis with wound healing

Mechanism of action of montmorillonite powder on injury and repair factors in Stage II pressure ulcers in model mice

BACKGROUND

This study aims to elucidate the therapeutic effects and underlying mechanisms of montmorillonite powder on wound healing in mice with Stage II pressure ulcers, thereby providing a robust foundation for its clinical application in the treatment of such ulcers.

MATERIALS AND METHODS

Sixty 8-week-old specific pathogen-free male BALB/c mice were randomly allocated into three groups: a model group (where Stage II pressure ulcers were induced using the magnet pressure method and the wounds were dressed with gauze soaked in 0.9% sodium chloride solution), a treatment group (where, following the induction of Stage II pressure ulcer models, wounds were uniformly treated with montmorillonite powder), and a control group (where magnets were placed in the same location without exerting magnetic pressure). Skin histopathology was assessed via light microscopy. Wound healing progress over various intervals was quantified utilizing Image-Pro Plus software. Histopathological alterations in the wounds were examined through hematoxylin and eosin (H&E) staining. The expression of growth factor proteins within the wound tissue was analyzed using the streptavidin-peroxidase method. Furthermore, the levels of vascular endothelial growth factor (VEGF), collagen types I and III (COL-I, COL-III) proteins were quantified via Western blotting, serum concentrations of inflammatory mediators in mice were determined by enzyme-linked immunosorbent assay, and the levels of oxidative stress markers in wound tissues were measured using UV-visible spectrophotometry.

RESULTS

The treatment group exhibited significantly reduced serum levels of interleukin-1β, interleukin-6, and tumor necrosis factor-alpha, and elevated levels of interleukin-4 compared to the model group (p < 0.05). Additionally, the expression of transforming growth factor-beta1, basic fibroblast growth factor, epidermal growth factor, VEGF, COL-I, and COL-III proteins in wound tissues was significantly higher in the treatment group than in the model group (p < 0.05). Levels of superoxide dismutase and glutathione peroxidase in wound tissues were higher, and levels of malondialdehyde were lower in the treatment group compared to the model group (p < 0.05).

CONCLUSION

Montmorillonite powder facilitates wound healing and augments the healing rate of Stage II pressure ulcers in model mice. Its mechanism of action is likely associated with mitigating wound inflammation, reducing oxidative stress damage, promoting angiogenesis, and enhancing the synthesis of growth factors and collagen.

Emerging trends and challenges in polysaccharide derived materials for wound care applications: A review

Polysaccharides are favourable and promising biopolymers for wound care applications due to their abundant natural availability, low cost and excellent biocompatibility. They possess different functional groups, such as carboxylic, hydroxyl and amino, and can easily be modified to obtain the desirable properties and various forms. This review systematically analyses the recent progress in polysaccharides derived materials for wound care applications, emphasizing the most commonly used cellulose, chitosan, alginate, starch, dextran and hyaluronic acid derived materials. The distinctive attributes of each polysaccharide derived wound care material are discussed in detail, along with their different forms, i.e., films, membranes, sponges, nanoemulsions, nanofibers, scaffolds, nanocomposites and hydrogels. The processing methods to develop polysaccharides derived wound care materials are also summarized. In the end, challenges related to polysaccharides derived materials in wound care management are listed, and suggestions are given to expand their utilization in the future to compete with conventional wound healing materials.

Recent research advances in polysaccharide-based hemostatic materials: A review

Massive bleeding resulting from civil and martial accidents can often lead to shock or even death, highlighting the critical need for the development of rapid and efficient hemostatic materials. While various types of hemostatic materials are currently utilized in clinical practice, they often come with limitations such as poor biocompatibility, toxicity, and biodegradability. Polysaccharides, such as alginate (AG), chitosan (CS), cellulose, starch, hyaluronic acid (HA), and dextran, have exhibit excellent biocompatibility and in vivo biodegradability. Their degradation products are non-toxic to surrounding tissues and can be absorbed by the body. As a result, polysaccharides have been extensively utilized in the development of hemostatic materials and have gained significant attention in the field of in vivo hemostasis. This review offers an overview of the different forms, hemostatic mechanisms, and specific applications of polysaccharides. Additionally, it discusses the future opportunities and challenges associated with polysaccharide-based hemostats.

Dual cross-linked self-healing hydrogel enhanced by dopamine nanoparticles and raffinose for wound healing

A series of intricate and dynamic physiological healing processes are involved in the healing of skin wounds. Herein, a multifunctional hydrogel is firstly designed and constructed by L-arginine-grafted O-carboxymethyl chitosan (CMCA), catechol-modified oxidized hyaluronic acid (DOHA), and dopamine nanoparticles (pDA-NPs). pDA-NPs were loaded in hydrogel for inherently powerful antimicrobial properties and could be as a cross-linking agent to construct hydrogels. Raffinose (Raf) was further incorporated to obtain CMCA-DOHA-pDA2@Raf hydrogel for its function of modulating epidermal differentiation. The hydrogel has good physicochemical properties and could promote cell proliferation and migration, which shows superior hemostatic capabilities in animal models of hemorrhage. The hydrogel significantly promoted wound healing on rat skin defect models by upregulating VEGF and CD31 and decreasing IL-6 and TNF-α, stimulating neovascularization and collagen deposition in epithelial structures. This multifunctional hydrogel implies the potential to be a dynamic wound dressing.

Recent Advances in Topical Hemostatic Materials

Untimely or improper treatment of traumatic bleeding may cause secondary injuries and even death. The traditional hemostatic modes can no longer meet requirements of coping with complicated bleeding emergencies. With scientific and technological advancements, a variety of topical hemostatic materials have been investigated involving inorganic, biological, polysaccharide, and carbon-based hemostatic materials. These materials have their respective merits and defects. In this work, the application and mechanism of the major hemostatic materials, especially some hemostatic nanomaterials with excellent adhesion, good biocompatibility, low toxicity, and high adsorption capacity, are summarized. In the future, it is the prospect to develop multifunctional hemostatic materials with hemostasis and antibacterial and anti-inflammatory properties for promoting wound healing.

Multifunctional Nanoclay-Based Hemostatic Materials for Wound Healing: A Review

Bleeding to death accounts for around 30-40% of all trauma-related fatalities. Current hemostatic materials are mainly mono-functional or have insufficient hemostatic capacity. Nanoclay has been recently shown to accelerate hemostasis, improve wound healing, and provide the resulting multifunctional hemostatic materials antibacterial, anti-inflammatory, and healing-promoting due to its distinctive morphological structure and physicochemical properties. Herein, the chemical design and action mechanism of nanoclay-based hemostatic, antibacterial, and pro-wound healing materials in the context of wound healing are discussed. The physiological processes of hemostasis and wound healing to elucidate the significance of nanoclay for functional wound hemostatic dressing design are outlined. A summary of the features of various nanoclay and product types used in wound hemostatic dressings is provided. Nanoclay can be antimicrobial due to the slow release of metal ions and has an abundant surface charge allowing for high affinity for proteins and cells, which can activate the coagulation reaction or facilitate tissue repair. Nanoclay with a microporous structure can be used as drug carriers to create composites critical for inhibiting bacterial growth on wounds or promoting the regeneration of vascular, muscle, and skin tissues. Directions for further research and innovation of nanoclay-based multifunctional materials for hemostasis and tissue regeneration are explored.

Recent advances in the application of clay-containing hydrogels for hemostasis and wound healing

INTRODUCTION

Immediate control of bleeding and anti-infection play important roles in wound management. Multiple organ dysfunction syndrome and death may occur if persistent bleeding, hemodynamic instability, and hypoxemia are not addressed. The combination of clay and hydrogel provides a new outlet for wound hemostasis. In this review, the current research progress of hydrogel/clay composite hemostatic agents was reviewed.

AREAS COVERED

This paper summarizes the characteristics of several kinds of clay including kaolinite, montmorillonite, laponite, sepiolite, and palygorskite. The advantages and disadvantages of its application in hemostasis were also summarized. Future directions for the application of hydrogel/clay composite hemostatic agents are presented.

EXPERT OPINION

Clay can activate the endogenous hemostatic pathway by increasing blood cell concentration and promoting plasma absorption to accelerate the hemostasis. Clay is antimicrobial due to the slow release of metal ions and has a rich surface charge with a high affinity for proteins and cells to promote tissue repair. Hydrogels have some properties such as good biocompatibility, strong adhesion, high stretchability, and good self-healing. Despite promising advances, hydrogel/clay composite hemostasis remains a limitation. Therefore, more evidence is needed to further elucidate the risk factors and therapeutic effects of hydrogel/clay in hemostasis and wound healing.

Mussel-inspired "all-in-one" sodium alginate/carboxymethyl chitosan hydrogel patch promotes healing of infected wound

Hydrogels have been widely used as wound dressings to accelerate wound healing. However, due to the impaired skin barrier at the wound site, external bacteria can easily invade the wound and cause infection. In this study, we designed a dopamine-modified sodium alginate/carboxymethyl chitosan/polyvinylpyrrolidone (CPD) hydrogel, which was able to promote wound healing while preventing wound infection. Due to the high content of catechol groups, the CPD hydrogel exhibited good tissue adhesion ability and a significant scavenging ability for DPPH• and PTIO• radicals. Under near-infrared laser irradiation, the temperature of CPD hydrogel increased significantly, which significantly killed the Staphylococcus aureus and Escherichia coli. The cell migration test confirmed that CPD hydrogel could promote the cell migration ratio. In the in vivo wound healing test for infected full-thickness skin defect, CPD hydrogel significantly inhibited bacterial proliferation and enhanced wound healing rate. Therefore, the multifunctional hydrogel is expected to be applied to wound healing.

Cellulose based composite sponges with oriented porous structure and superabsorptive capacity for quick hemostasis

Excessive bleeding is the leading cause of death in accidents and operations. Ca2+ crosslinked carboxyl nanocellulose (CN)/montmorillonite (MMT) composite (CaCNMMT) sponges were prepared by uniform mixing and directional freeze-drying methods which was inspired by the coordination mechanism of blood clot formation and coagulation cascade activation in natural hemostasis process. Carboxyl nanocellulose (CaCN) sponge has instantaneous water absorption capacity, and CaCNMMT sponges could further activate clotting factors. Therefore, CaCNMMT sponges achieved quick hemostasis by efficient concentrating blood, inducing hemocyte aggregation and stimulating coagulation cascade activation based on the synergistic effects of CN and MMT. Blood clotting index of CaCNMMT (15.90 ± 0.52 %) was significantly lower than CaCN (59.3 ± 1.43 %), and APTT time (22 ± 2 s) was almost equivalent to MMT (20 ± 2 s). CaCNMMT sponge showed good quick hemostatic effect on massive hemorrhage in both tail-breaking and liver injury model which provided a new strategy for the application of MMT in hemostatic and trauma treatment fields.

Progress and future prospects of hemostatic materials based on nanostructured clay minerals

The occurrence of uncontrolled hemorrhage is a significant threat to human life and health. Although hemostatic materials have made remarkable advances in the biomaterials field, it remains a challenge to develop safe and effective hemostatic materials for global medical use. Natural clay minerals (CMs) have long been used as traditional inorganic hemostatic agents due to their good hemostatic capability, biocompatibility and easy availability. With the advancement of science, technology and ideology, CM-based hemostatic materials have undergone continuous innovations by integrating new inspirations with conventional concepts. This review systematically summarizes the hemostatic mechanisms of different natural CMs based on their nanostructures. Moreover, it also comprehensively reviews the latest research progress for CM-based hemostatic hybrid and nanocomposite materials, and discusses the challenges and developments in this field.

Advances in haemostatic sponges: Characteristics and the underlying mechanisms for rapid haemostasis

In traumatized patients, the primary cause of mortality is uncontrollable continuous bleeding and unexpected intraoperative bleeding which is likely to increase the risk of complications and surgical failure. High expansion sponges are effective clinical practice for the treatment of wound bleeding (irregular/deep/narrow) that are caused by capillaries, veins and even arterioles as they possess a high liquid absorption ratio so can absorb blood platelets easily in comparison with traditional haemostasis treatments, which involve compression, ligation, or electrical coagulation etc. When in contact with blood, haemostatic sponges can cause platelet adhesion, aggregation, and thrombosis, preventing blood from flowing out from wounds, triggering the release of coagulation factors, causing the blood to form a stable polymerized fibre protein, forming blood clots, and achieving the goal of wound bleeding control. Haemostatic sponges are found in a variety of shapes and sizes. The aim of this review is to facilitate an overview of recent research around haemostatic sponge materials, products, and technology. This paper reviews the synthesis, properties, and characteristics of haemostatic sponges, together with the haemostasis mechanisms of haemostatic sponges (composite materials), such as chitosan, cellulose, gelatin, starch, graphene oxide, hyaluronic acid, alginate, polyethylene glycol, silk fibroin, synthetic polymers silver nanoparticles, zinc oxide nanoparticles, mesoporous silica nanoparticles, and silica nanoparticles. Also, this paper reviews commercial sponges and their properties. In addition to this, we discuss various in-vitro/in-vivo approaches for the evaluation of the effect of sponges on haemostasis.

Unusual Surface Coagulation Activation Patterns of Crystalline and Amorphous Silicate-Based Biominerals

Activation of coagulation cascades, especially FX and prothrombin, prevents blood loss and reduces mortality from hemorrhagic shock. Inorganic salts are efficient but cannot stop bleeding completely in hemorrhagic events, and rebleeding carries a significant mortality risk. The coagulation mechanism of biominerals has been oversimplified in the past two decades, limiting the creation of novel hemostats. Herein, at the interface, the affinity of proteins, the protease activity, fibrinolysis, hydration shell, and dynamic microenvironment are monitored at the protein level. Proteomic analysis reveals that fibrinogen and antithrombin III's affinity for kaolin's interface causes a weak thrombus and rebleeding during hemostasis. Inspiringly, amorphous bioactive glass (BG) with a transient-dynamic ion microenvironment breaches the hydration layer barrier and selectively and slightly captures procoagulant components of kiniogen-1, plasma kallikrein, FXII, and FXI proteins on its interface, concurrently generating a continuous biocatalytic interface to rapidly activate both intrinsic and extrinsic coagulation pathways. Thus, prothrombin complexes are successfully hydrolyzed to thrombin without platelet membrane involvement, speeding production of high-strength clots. This study investigates how the interface of inorganic salts assists in coagulation cascades from a more comprehensive micro-perspective that may help elucidate the clinical application issues of kaolin-gauze and pave the way to new materials for managing hemorrhage.

Rapidly degrading and mussel-inspired multifunctional carboxymethyl chitosan/montmorillonite hydrogel for wound hemostasis

The conventional method of using montmorillonite hemostatic materials affects the hemostatic effect due to easy dislodgement on the wound surface. In this paper, a multifunctional bio-hemostatic hydrogel (CODM) was prepared based on hydrogen bonding and Schiff base bonding using modified alginate, polyvinylpyrrolidone (PVP), and carboxymethyl chitosan. The amino group-modified montmorillonite was uniformly dispersed in the hydrogel by its amido bond formation with the carboxyl groups of carboxymethyl chitosan and oxidized alginate. The catechol group, -CHO, and PVP can form hydrogen bonds with the tissue surface to afford the firm tissue adhesion to afford the wound hemostatic. The addition of montmorillonite-NH₂ further improves the hemostatic ability, making it even better than commercial hemostatic materials. Moreover, the photothermal conversion ability (derived from the polydopamine) was synergized with the phenolic hydroxyl group, quinone group, and the protonated amino group to effectively kill the bacteria in vitro and in vivo. Based on its in vitro and in vivo biosafety and satisfactory degradation ratio anti-inflammatory, antibacterial, and hemostatic properties, the CODM hydrogel holds promising potential for emergency hemostasis and intelligent wound management.

A kaolin/calcium incorporated shape memory and antimicrobial chitosan-dextran based cryogel as an efficient haemostatic dressing for uncontrolled hemorrhagic wounds

Increased mortalities associated with uncontrolled and excessive bleeding is still of paramount concern in the clinics, caregivers and military medics. Herein, we designed a shape memory cryogel based on chitosan (C) and functionalized-dextran (D), incorporated with Kaolin (K) and calcium (Ca²⁺) as haemostatic agents. The developed cryogel (CDKCa) exhibits a uniform interconnected porous architecture with profound fluid absorption ability, rapid blood clotting, stable clot formation and good antibacterial activity. The CDKCa elucidates significantly less clotting time (~30 s; in-vitro) and increased aggregation and activation of platelets/red blood cells in comparison to the control groups and commercial dressings (Axiostat and QuikClot). The developed CDKCa also significantly reduced the aPTT and PT values by ~58 % and 31 % respectively, leading to the activation of intrinsic and extrinsic coagulation cascades. The CDKCa cryogel displays enhanced mechanical stability, flexibility and a good shape memory, a property quintessential to cease uncontrolled bleeding in irregular and non-compressible wounds. Further, the Kaolin and Ca²⁺ incorporated shape memory CDKCa cryogel demonstrates a rapid blood coagulation and stable clot formation in different compressible and non-compressible rat liver and femur hemorrhagic models. In summary, the endorsed results of CDKCa suggest that the design, fabrication and excellent clotting ability may attribute to high haemostatic efficiency of CDKCa dressing and have a great potential to prevent uncontrollable hemorrhages.

Engineering design of asymmetric halloysite/chitosan/collagen sponge with hydrophobic coating for high-performance hemostasis dressing

Uncontrolled massive hemorrhage is a crucial cause of death, and developing efficient hemostatic materials are of great medical importance. Herein, we prepared a halloysite-chitosan-collagen composite sponge by directional freeze-drying method and coating the sponge by hydrophobic polydimethylsiloxane coating for rapid and effective hemostasis. The aligned channel structure of the sponge with a pore size of ~30 μm was beneficial for the transport of blood. Morphology and spectrum results suggested that chitosan and collagen are capable of adsorbing on the outer surface of HNTs due to the hydrogen bonding and electrostatic attractions. The directional freeze-dried sponge absorbed the majority of the blood within 10 s, and that process essentially completed in 30 s, which are faster than its non-directional counterpart. The composite sponges exhibited high antibacterial properties towards E. coli and S. aureus, and they are non-cytotoxic towards mouse fibroblasts and have high hemocompatibility. The hemostatic dressing avoided unnecessary blood loss because of excessive blood absorption. In vivo experiments of rats also confirmed the ability of the asymmetric sponges to rapidly clot and reduce reducing blood loss. This work developed a high-performance and hemostatic dressing by material design and processing technique, which shows a promising application in wound healing.

White-light crosslinkable milk protein bioadhesive with ultrafast gelation for first-aid wound treatment

BACKGROUND

Post-traumatic massive hemorrhage demands immediately available first-aid supplies with reduced operation time and good surgical compliance. In-situ crosslinking gels that are flexibly adapting to the wound shape have a promising potential, but it is still hard to achieve fast gelation, on-demand adhesion, and wide feasibility at the same time.

METHODS

A white-light crosslinkable natural milk-derived casein hydrogel bioadhesive is presented for the first time. Benefiting from abundant tyrosine residues, casein hydrogel bioadhesive was synthesized by forming di-tyrosine bonds under white light with a ruthenium-based catalyst. We firstly optimized the concentration of proteins and initiators to achieve faster gelation and higher mechanical strength. Then, we examined the degradation, cytotoxicity, tissue adhesion, hemostasis, and wound healing ability of the casein hydrogels to study their potential to be used as bioadhesives.

RESULT

Rapid gelation of casein hydrogel is initiated with an outdoor flashlight, a cellphone flashlight, or an endoscopy lamp, which facilitates its usage during first-aid and minimally invasive operations. The rapid gelation enables 3D printing of the casein hydrogel and excellent hemostasis even during liver hemorrhage due to section injury. The covalent binding between casein and tissue enables robust adhesion which can withstand more than 180 mmHg blood pressure. Moreover, the casein-based hydrogel can facilitate post-traumatic wound healing caused by trauma due to its biocompatibility.

CONCLUSION

Casein-based bioadhesives developed in this study pave a way for broad and practical application in emergency wound management.

Inorganic-based biomaterials for rapid hemostasis and wound healing

The challenge for the treatment of severe traumas poses an urgent clinical need for the development of biomaterials to achieve rapid hemostasis and wound healing. In the past few decades, active inorganic components and their derived composites have become potential clinical products owing to their excellent performances in the process of hemorrhage control and tissue repair. In this review, we provide a current overview of the development of inorganic-based biomaterials used for hemostasis and wound healing. We highlight the methods and strategies for the design of inorganic-based biomaterials, including 3D printing, freeze-drying, electrospinning and vacuum filtration. Importantly, inorganic-based biomaterials for rapid hemostasis and wound healing are presented, and we divide them into several categories according to different chemistry and forms and further discuss their properties, therapeutic mechanisms and applications. Finally, the conclusions and future prospects are suggested for the development of novel inorganic-based biomaterials in the field of rapid hemostasis and wound healing.

Bioactive inorganic particles-based biomaterials for skin tissue engineering

The challenge for treatment of severe cutaneous wound poses an urgent clinical need for the development of biomaterials to promote skin regeneration. In the past few decades, introduction of inorganic components into material system has become a promising strategy for improving performances of biomaterials in the process of tissue repair. In this review, we provide a current overview of the development of bioactive inorganic particles-based biomaterials used for skin tissue engineering. We highlight the three stages in the evolution of the bioactive inorganic biomaterials applied to wound management, including single inorganic materials, inorganic/organic composite materials, and inorganic particles-based cell-encapsulated living systems. At every stage, the primary types of bioactive inorganic biomaterials are described, followed by citation of the related representative studies completed in recent years. Then we offer a brief exposition of typical approaches to construct the composite material systems with incorporation of inorganic components for wound healing. Finally, the conclusions and future directions are suggested for the development of novel bioactive inorganic particles-based biomaterials in the field of skin regeneration.

Recent advances in biopolymer-based hemostatic materials

Hemorrhage is the leading cause of trauma-related deaths, in hospital and pre-hospital settings. Hemostasis is a complex mechanism that involves a cascade of clotting factors and proteins that result in the formation of a strong clot. In certain surgical and emergency situations, hemostatic agents are needed to achieve faster blood coagulation to prevent the patient from experiencing a severe hemorrhagic shock. Therefore, it is critical to consider appropriate materials and designs for hemostatic agents. Many materials have been fabricated as hemostatic agents, including synthetic and naturally derived polymers. However, compared to synthetic polymers, natural polymers or biopolymers, which include polysaccharides and polypeptides, have greater biocompatibility, biodegradability, and processibility. Thus, in this review, we focus on biopolymer-based hemostatic agents of different forms, such as powder, particles, sponges, and hydrogels. Finally, we discuss biopolymer-based hemostats currently in clinical trials and offer insight into next-generation hemostats for clinical translation.

Recent Progress in Electrospun Polyacrylonitrile Nanofiber-Based Wound Dressing

Bleeding control plays a very important role in worldwide healthcare, which also promotes research and development of wound dressings. The wound healing process involves four stages of hemostasis, inflammation, proliferation and remodeling, which is a complex process, and wound dressings play a huge role in it. Electrospinning technology is simple to operate. Electrospun nanofibers have a high specific surface area, high porosity, high oxygen permeability, and excellent mechanical properties, which show great utilization value in the manufacture of wound dressings. As one of the most popular reactive and functional synthetic polymers, polyacrylonitrile (PAN) is frequently explored to create nanofibers for a wide variety of applications. In recent years, researchers have invested in the application of PAN nanofibers in wound dressings. Research on spun nanofibers is reviewed, and future development directions and prospects of electrospun PAN nanofibers for wound dressings are proposed.

Multi-functional wound dressings based on silicate bioactive materials

Most traditional wound dressings passively offer a protective barrier for the wounds, which lacks the initiative in stimulating tissue regeneration. In addition, cutaneous wound healing is usually accompanied by various complicated conditions, including bacterial infection, skin cancer, and damaged skin appendages, bringing further challenges for wound management in clinic. Therefore, an ideal wound dressing should not only actively stimulate wound healing but also hold multi-functions for solving problems associated with different specific wound conditions. Recent studies have demonstrated that silicate bioceramics and bioglasses are one type of promising materials for the development of wound dressings, as they can actively accelerate wound healing by regulating endothelial cells, dermal fibroblasts, macrophages, and epidermal cells. In particular, silicate-based biomaterials can be further functionalized by specific structural design or doping with functional components, which endow materials with enhanced bioactivities or expanded physicochemical properties such as photothermal, photodynamic, chemodynamic, or imaging properties. The functionalized materials can be used to address wound healing with different demands including but not limited to antibacterial, anticancer, skin appendages regeneration, and wound monitoring. In this review, we summarized the current research on the development of silicate-based multi-functional wound dressings and prospected the development of advanced wound dressings in the future.

Oxidized dextran crosslinked polysaccharide/protein/polydopamine composite cryogels with multiple hemostatic efficacies for noncompressible hemorrhage and wound healing

Noncompressible hemorrhage caused by gunshots and sharp objects leads to higher trauma mortality, and cryogels have great potential in controlling noncompressible hemorrhage applications owing to their shape-memory properties. However, the use of non-toxic crosslinkers to prepare cryogels for noncompressible hemorrhage remains a challenge. In this study, a series of cryogels were prepared using oxidized dextran (ODex) as a biocompatible crosslinker, combined with the good hemostatic properties of chitosan (CS) and human-like collagen (HLC), and polydopamine nanoparticles (PDA-NPs) were also introduced to strengthen the shape recovery speed of the cryogels and further enhance their hemostatic performance. The CS/HLC/ODex/PDA-NPs (CHOP) cryogels presented a highly interconnected macroporous structure, powerful water/blood absorption capacity, robust mechanical performance, and rapid water/blood-triggered shape recovery. In vitro coagulation and coagulation mechanism tests showed that CHOP exhibited strong procoagulant ability, high adhesion to blood cells and fibrinogen, and the capacity to activate platelets and intrinsic pathways. In vivo hemostatic tests indicated that CHOP could effectively shorten the bleeding time and reduce the bleeding volume of liver incision bleeding and liver noncompressible hemorrhage. Meanwhile, CHOP exhibited good biocompatibility and biodegradability, and could promote wound healing. These results suggest that CHOP cryogels will be a promising hemostatic dressing.

Investigation of construction and characterization of carboxymethyl chitosan - sodium alginate nanoparticles to stabilize Pickering emulsion hydrogels for curcumin encapsulation and accelerating wound healing

Limitations in compatibility and effectiveness in delivering bioactive compounds often make it prohibitively difficult to apply Pickering emulsions in wound dressing. In this research, we prepared Pickering emulsion composite hydrogels based on carboxymethyl chitosan - sodium alginate (CMCS-SA) nanoparticles (NPs) stabilized Pickering emulsions, poloxamer 407 (PLX), and curcumin (CUR). CMCS-SA NPs were prepared and used to stabilize Pickering emulsion. The stability of Pickering emulsion improved with the increase of the concentration of NPs, and was highly sensitive to ionic strength change. This Pickering emulsion remained stable at various temperatures. After curcumin were introduced into the emulsion, 0.6% CMCS-SA NPs Pickering emulsion showed controlled release of curcumin in vitro. The CMCS-SA-PLX-CUR hydrogels also exhibited smooth surface and dense structure. This composite hydrogels has antibacterial properties against Escherichia coli and Staphylococcus aureus. Moreover, the CMCS-SA-PLX-CUR hydrogels improved wound healing and increased expression of Ki67 and CD31. RT-qPCR results indicated that the mRNA levels of α-SMA and TGF-β1 in the CMCS-SA-PLX-CUR group were downregulated, while the mRNA levels of TGF-β3 increased. The present study suggests that the potentials of CMCS-SA-PLX-CUR hydrogels are promising in protecting bioactive components and wound care management.

Preparation of Chitosan/Clay Composites for Safe and Effective Hemorrhage Control

Uncontrolled hemorrhage from trauma or surgery can lead to death. In this study, chitosan/kaolin (CSK) and chitosan/montmorillonite (CSMMT) composites were prepared from chitosan (CS), kaolin (K), and montmorillonite (MMT) as raw materials to control bleeding. The physiochemical properties and surface morphology of CSK and CSMMT composites were analyzed by Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), zeta potentials, and X-ray fluorescence (XRF). The hemostatic mechanism was measured in vitro by activated partial thromboplastin time (APTT), prothrombin time (PT), in vitro clotting time, erythrocyte aggregation, and thromboelastogram (TEG). The hemostasis ability was further verified by using tail amputation and arteriovenous injury models in rats. The biocompatibility of CSK and CSMMT was evaluated by in vitro hemolysis, cytotoxicity assays, as well as acute toxicity test and skin irritation tests. The results show that CSK and CSMMT are promising composite materials with excellent biocompatibility and hemostatic properties that can effectively control bleeding.

Dextran, as a biological macromolecule for the development of bioactive wound dressing materials: A review of recent progress and future perspectives

Skin is the largest organ in the body which plays different roles in maintaining hemostasis. Although this tissue has a high healing potential, severe skin wounds cannot heal without external interventions. Among various treatment strategies, tissue-engineered wound dressings have gained significant attention. In this regard, tremendous progress has been made in the field of tissue engineering to develop constructs with higher healing activities. Material selection and optimization are key factors in development of such dressings. Among different candidates, dextran-based wound dressings have been extensively studied. Dextran is a branched biological macromolecule which is composed of anhydroglucose monomers. Due to its excellent biocompatibility, biodegradability, non-toxicity, modifiable functional groups, and proven clinical safety, dextran has found application in wound healing research. In the current review, applications, challenges, and future perspectives of dextran-based wound dressings will be discussed.

In Vitro Antimicrobial Activity Of Layered Silicate Materials

Objective — to assess the presence of a direct antimicrobial effect of natural minerals (ammonite; montmorillonite of the Azerbaijani deposit; calcium montmorillonite, or light clay, and sodium montmorillonite, or dark clay, of the Gerpegezh deposit in Kabardino-Balkaria; serpentinite) against strains of Staphylococcus aureus, Escherichia coli and yeast-like Candida fungi. Material and Methods — The antimicrobial activity was investigated by qualitative and quantitative methods; the methods of X-ray diffraction and X-ray fluorescence analysis were used to assess the chemical composition of samples of natural minerals. The results were statistically processed. Results — We established that ammonite, montmorillonite of Azerbaijani origin and serpentinite did not have a direct antimicrobial effect against the studied cultures of bacteria and fungi (S. aureus, E. coli, Candida albicans). The growth of S. aureus was suppressed by calcium and sodium montmorillonite from the Gerpegezh deposit. Sodium montmorillonite had the strongest antibacterial effect, and its dose-dependent effect was revealed. According to the data of X-ray fluorescence analysis, in the structure of, trivalent iron and oxides of manganese and titanium predominated in the samples of dark Gerpegezh clay with a more pronounced anti-staphylococcal effect. Conclusion — Our study demonstrated the possibilities and limitations of using various samples of layered silicate minerals for antibacterial solutions. The spectrum of antimicrobial activity largely depends on the unique composition of mineral complexes. Samples with a high content of iron(III) can be considered promising in the development of natural antimicrobial preparations.

Cationic, anionic and neutral polysaccharides for skin tissue engineering and wound healing applications

Today, chronic wound care and management can be regarded as a clinically critical issue. However, the limitations of current approaches for wound healing have encouraged researchers and physicians to develop more efficient alternative approaches. Advances in tissue engineering and regenerative medicine have resulted in the development of promising approaches that can accelerate wound healing and improve the skin regeneration rate and quality. The design and fabrication of scaffolds that can address the multifactorial nature of chronic wound occurrence and provide support for the healing process can be considered an important area requiring improvement. In this regard, polysaccharide-based scaffolds have distinctive properties such as biocompatibility, biodegradability, high water retention capacity and nontoxicity, making them ideal for wound healing applications. Their tunable structure and networked morphology could facilitate a number of functions, such as controlling their diffusion, maintaining wound moisture, absorbing a large amount of exudates and facilitating gas exchange. In this review, the wound healing process and the influential factors, structure and properties of carbohydrate polymers, physical and chemical crosslinking of polysaccharides, scaffold fabrication techniques, and the use of polysaccharide-based scaffolds in skin tissue engineering and wound healing applications are discussed.

Haemostatic materials for wound healing applications

Wounds are one of the most common health issues, and the cost of wound care and healing has continued to increase over the past decade. The first step in wound healing is haemostasis, and the development of haemostatic materials that aid wound healing has accelerated in the past 5 years. Numerous haemostatic materials have been fabricated, composed of different active components (including natural polymers, synthetic polymers, silicon-based materials and metal-containing materials) and in various forms (including sponges, hydrogels, nanofibres and particles). In this Review, we provide an overview of haemostatic materials in wound healing, focusing on their chemical design and operation. We describe the physiological process of haemostasis to elucidate the principles that underpin the design of haemostatic wound dressings. We also highlight the advantages and limitations of the different active components and forms of haemostatic materials. The main challenges and future directions in the development of haemostatic materials for wound healing are proposed.

Functional Hydrogels as Wound Dressing to Enhance Wound Healing

Hydrogels, due to their excellent biochemical and mechnical property, have shown attractive advantages in the field of wound dressings. However, a comprehensive review of the functional hydrogel as a wound dressing is still lacking. This work first summarizes the skin wound healing process and relates evaluation parameters and then reviews the advanced functions of hydrogel dressings such as antimicrobial property, adhesion and hemostasis, anti-inflammatory and anti-oxidation, substance delivery, self-healing, stimulus response, conductivity, and the recently emerged wound monitoring feature, and the strategies adopted to achieve these functions are all classified and discussed. Furthermore, applications of hydrogel wound dressing for the treatment of different types of wounds such as incisional wound and the excisional wound are summarized. Chronic wounds are also mentioned, and the focus of attention on infected wounds, burn wounds, and diabetic wounds is discussed. Finally, the future directions of hydrogel wound dressings for wound healing are further proposed.

Mussel-inspired adhesive antioxidant antibacterial hemostatic composite hydrogel wound dressing via photo-polymerization for infected skin wound healing

With the increasing prevalence of drug-resistant bacterial infections and the slow healing of chronically infected wounds, the development of new antibacterial and accelerated wound healing dressings has become a serious challenge. In order to solve this problem, we developed photo-crosslinked multifunctional antibacterial adhesive anti-oxidant hemostatic hydrogel dressings based on polyethylene glycol monomethyl ether modified glycidyl methacrylate functionalized chitosan (CSG-PEG), methacrylamide dopamine (DMA) and zinc ion for disinfection of drug-resistant bacteria and promoting wound healing. The mechanical properties, rheological properties and morphology of hydrogels were characterized, and the biocompatibility of these hydrogels was studied through cell compatibility and blood compatibility tests. These hydrogels were tested for the in vitro blood-clotting ability of whole blood and showed good hemostatic ability in the mouse liver hemorrhage model and the mouse-tail amputation model. In addition, it has been confirmed that the multifunctional hydrogels have good inherent antibacterial properties against Methicillin-resistant Staphylococcus aureus (MRSA). In the full-thickness skin defect model infected with MRSA, the wound closure ratio, thickness of granulation tissue, number of collagen deposition, regeneration of blood vessels and hair follicles were measured. The inflammation-related cytokines (CD68) and angiogenesis-related cytokines (CD31) expressed during skin regeneration were studied. All results indicate that these multifunctional antibacterial adhesive hemostatic hydrogels have better healing effects than commercially available Tegaderm™ Film, revealing that they have become promising alternative in the healing of infected wounds.

•

Antibacterial antioxidant adhesion hydrogel was obtained by photopolymerization.

•

These hydrogels exhibited good hemostatic property and cell compatibility.

•

The hydrogels showed good antibacterial property against MRSA.

•

The hydrogels significantly enhanced wound healing of infected skin wound.

Montmorillonite nanosheets with enhanced photodynamic performance for synergistic bacterial ablation

Montmorillonite (MMT), as a naturally sourced and FDA-approved biomaterial, has attracted considerable attention due to its extensive application in biomedical areas, such as intestinal ailments, drug delivery, and additive manufacturing. In this work, two-dimensional montmorillonite (2D-MMT) ultrathin nanosheets were successfully prepared from sodium montmorillonite (Na-MMT) by utilizing a freeze-drying assisted method. Possessing a large specific surface area and increased number of exposed hydroxyl groups, 2D-MMT nanosheets exhibited better antibacterial ability than the original Na-MMT. More strikingly, we found that both 2D-MMT nanosheets and Na-MMT could generate reactive oxygen species (ROS) upon visible light illumination, which could promote their antibacterial efficiency. As a result, 2D-MMT nanosheets showed efficient antibacterial performance in the presence of light towards Escherichia coli with a simultaneous enhancement of surface adsorption and photodynamic ablation. What's more, a possible mechanism for ROS generation by MMT upon light illumination was first proposed in this work. The combination of the increased physical adsorption capacity and ROS generation ability of 2D-MMT nanosheets would help inspire the development of MMT as a promising antimicrobial candidate in the future.