Synthesis and characterization of dopamine-modified Ca-alginate/poly(N-isopropylacrylamide) microspheres for water retention and multi-responsive controlled release of agrochemicals

Physicochemical properties and fractal characterizations of the functionalized porous clinoptilolites for controlling alginate delivery in growing cauliflower and leaf mustard

Using natural clinoptilolite (NCP) as a carrier and alginate (Alg)-calcium as an active species, the porous silicon calcium alginate nanocomposite (Alg-Ca-NCP) was successfully fabricated via adsorption-covalence-hydrogen bond. Its structural features and physicochemical properties were detailed investigated by various characterizations. The results indicated that Alg-Ca-NCP presented the disordered lamellar structures with approximately uniform particles in size of 300-500 nm. Specially, their surface fractal evolutions between the irregular roughness and dense structures were demonstrated via the SAXS patterns. The results elucidated that the abundant micropores of NCP were beneficial for unrestricted diffusing of Alg-Ca, which was conducive to facilitate a higher loading and sustainable releasing. The Ca content of leaf mustard treated with Alg-Ca-NCP-0.5 was 484.5 mg/100g on the 21st day, higher than that by water (CK) and CaCl2 solution treatments, respectively. Meanwhile, the prepared Alg-Ca-NCPs presented the obvious anti-aging effects on peroxidase drought stress of mustard leaves. These demonstrations provided a simple and effective method to synthesize Alg-Ca-NCPs as delivery nanocomposites, which is useful to improve the weak absorption and low utilization of calcium alginate by plants.

Controllable Regulation of Diesel Oil-in-Water Pickering Emulsion Stability by Multiresponsive Recyclable Magnetic Polymer Brush Microvessels

To ensure safety and efficiency in the production and transportation of fuel oil, there is an urgent demand to develop intelligent emulsifiers to deal with this challenge. Fe3O4@PDA-P(NIPAM-b-MAA-b-LMA) (MNPDNML) microspheres were prepared by modifying polydopamine and the triblock polymer brush P(NIPAM-b-MAA-b-LMA) on the surface of Fe3O4 nanoparticles via oxidative autopolymerization and SI-RAFT polymerization. Therefore, the MNPDNML microspheres exhibited sensitive stimulus-responsive behavior to pH, temperature, near-infrared (NIR) laser radiation, and magnetic fields. The stability state of the emulsion could be modulated by changing pH, temperature, magnetic field, and NIR radiation, and the reversible switching of emulsification/breaking behavior could be reached at least 10 times. This "intelligent emulsifier" exhibited high emulsification efficiency, long-term stability, and on-demand emulsification/breaking properties. It was notable that MNPDNML microspheres showed excellent emulsification ability for olive oil, kerosene, gasoline, and crude oil, which allowed the material to be widely used in the controlled transportation and separation of fuel oil.

3D Temperature-Controlled Interchangeable Pattern for Size-Selective Nanoparticle Capture

Patterned surfaces with distinct regularity and structured arrangements have attracted great interest due to their extensive promising applications. Although colloidal patterning has conventionally been used to create such surfaces, herein, we introduce a novel 3D patterned poly(N-isopropylacrylamide) (PNIPAM) surface, synthesized by using a combination of colloidal templating and surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization. In order to investigate the temperature-driven 3D morphological variations at a lower critical solution temperature (LCST) of ∼32 °C, multifaceted characterization techniques were employed. Atomic force microscopy confirmed the morphological transformations at 20 and 40 °C, while water contact angle measurements, upon heating, revealed distinct trends, offering insights into the correlation between surface wettability and topography adaptations. Moreover, quartz crystal microbalance with dissipation monitoring and electrochemical measurements were employed to detect the topographical adjustments of the unique hollow capsule structure within the LCST. Tests using different sizes of PSNPs shed light on the size-selective capture-release potential of the patterned PNIPAM, accentuating its biomimetic open-close behavior. Notably, our approach negates the necessity for expensive proteins, harnessing temperature adjustments to facilitate the noninvasive and efficient reversible capture and release of nanostructures. This advancement hopes to pave the way for future innovative cellular analysis platforms.

Silver and Antimicrobial Polymer Nanocomplexes to Enhance Biocidal Effects

Antimicrobial resistance has become a major problem over the years and threatens to remain in the future, at least until a solution is found. Silver nanoparticles (Ag-NPs) and antimicrobial polymers (APs) are known for their antimicrobial properties and can be considered an alternative approach to fighting resistant microorganisms. Hence, the main goal of this research is to shed some light on the antimicrobial properties of Ag-NPs and APs (chitosan (CH), poly-L-lysine (PLL), ε-poly-L-lysine (ε-PLL), and dopamine (DA)) when used alone and complexed to explore the potential enhancement of the antimicrobial effect of the combination Ag-NPs + Aps. The resultant nanocomplexes were chemically and morphologically characterized by UV-visible spectra, zeta potential, transmission electron microscopy, and Fourier-transform infrared spectroscopy. Moreover, the Ag-NPs, APs, and Ag-NPs + APs nanocomplexes were tested against Gram-positive Staphylococcus aureus (S. aureus) and the Gram-negative Escherichia coli (E. coli) bacteria, as well as the fungi Candida albicans (C. albicans). Overall, the antimicrobial results showed potentiation of the activity of the nanocomplexes with a focus on C. albicans. For the biofilm eradication ability, Ag-NPs and Ag-NPs + DA were able to significantly remove S. aureus preformed biofilm, and Ag-NPs + CH were able to significantly destroy C. albicans biofilm, with both performing better than Ag-NPs alone. Overall, we have proven the successful conjugation of Ag-NPs and APs, with some of these formulations showing potential to be further investigated for the treatment of microbial infections.

Evaluation of immobilized microspheres of Clonostachys rosea on Botrytis cinerea and tomato seedlings

Tomato (Solanum lycopersicum L.) is a popular vegetable crop which is widely cultivated around the world. However, the production of tomatoes is threatened by several phytopathogenic agents, including gray mold (Botrytis cinerea Pers.). Biological control using fungal agents such as Clonostachys rosea plays a pivotal role in managing gray mold. However, these biological agents can negatively be influenced by environmental factors. However, immobilization is a promising approach to tackle this issue. In this research, we used a nontoxic chemical material, sodium alginate as a carrier to immobilize C. rosea. For this, sodium alginate microspheres were prepared using sodium alginate prior to embedding C. rosea. The results showed that C. rosea was successfully embedded in sodium alginate microspheres, and immobilization enhanced the stability of the fungi. The embedded C. rosea was able to suppress the growth of gray mold efficiently. In addition, the activity of stress related enzymes, peroxidase superoxidase dismutase and polyphenol oxidation was promoted in tomatoes treated with the embedded C. rosea. By measuring photosynthetic efficiency, it was noted that the embedded C. rosea has positive impacts on tomato plants. Taken together, these results indicate that immobilization of C. rosea improved its stability without detrimentally affecting its efficiency on gray mold suppression and tomato growth. The results of this research can be used as a basis for research and development of new immobilized biocontrol agents.

Recent Development of Versatile Polyphenol Platforms in Fertilizers and Pesticides

The utilization of agrochemicals has been of significant importance in both the cultivation and disease control of crops. The development of advanced agrochemicals that are both effective and eco-friendly has been made possible through the use of slow delivery platforms and surface modification technology. Inspired by the nature of mussel adhesion, polyphenolic platforms with versatile properties have been extensively employed in various applications, including agro-food, owing to their ability to flexibly modulate chemical and surface characteristics. This mini-review highlights the development of polyphenols, such as polydopamine and tannic acid, in the field of agrochemicals, particularly in the design and production of novel fertilizers and pesticides. The synthetic approach, active ingredient release performance, foliar adhesion, and design of polyphenolic-based agrochemicals in recent years have been discussed to explore their potential applications and limitations. We believe that utilizing versatile polyphenolic materials and their characteristics for agro-food applications can provide innovative ideas and suggestions for developing novel agrochemicals suitable for modern and sustainable horticulture and agriculture.

Environmentally Friendly Zr-Based MOF for Pesticide Delivery: Ultrahigh Loading Capacity, pH-Responsive Release, Improved Leaf Affinity, and Enhanced Antipest Activity

The stimuli responsive pesticide delivery system (PDS) has drawn increasing attention in recent years, a system which can effectively improve the utilization of pesticides. In the current research, we report a pH responsive PDS by using carboxymethyl cellulose (CMC) modified Zr-based metal organic frameworks (UiO-66-NH₂) as the nanocarrier for acetamiprid (ATP). UiO-66-NH₂-CMC possesses a large surface area and abundant pores, which can effectively load ATP, and the loading rate is as high as 90.79%. Compared with free ATP, the ATP@UiO-66-NH₂-CMC nanopesticide exhibits pH responsive controlled release behavior, and the pesticide can sustained release to the medium. In addition, it also shows improved leaf affinity, which makes it easier to wet the leaf surface and improve the utilization of pesticide. Therefore, ATP@UiO-66-NH₂-CMC displays better antipest activity against aphids than free ATP does. Meanwhile, ATP@UiO-66-NH₂-CMC shows no negative effects on the germination and growth of maize, showing good biosafety. Moreover, the ATP@UiO-66-NH₂-CMC nanopesticide does not contain any toxic organic solvents or additives. Therefore, we hope that it can be a suitable candidate for plant protection and sustainable agriculture.

Metal-Organic Framework (UiO-66)-Based Temperature-Responsive Pesticide Delivery System for Controlled Release and Enhanced Insecticidal Performance against Spodoptera frugiperda

Spodoptera frugiperda is a global pest that brings about great disasters to crops. Conventional pesticide formulations often suffer from poor water solubility, low stability, burst release, weak leaf adhesion, and low efficiency. To improve the insecticidal activity of pesticides, a stimuli-responsive controlled release pesticide delivery system (PDS) has attracted extensive attention in recent years. This paper reports a temperature-responsive controlled release PDS based on poly(N-isopropyl acrylamide) (PNIPAm)-modified indoxacarb (IDC)-loaded UiO-66-(COOH)₂ (IDC@UiO-66-(COOH)₂-PNIPAm) and studies its insecticidal activities against S. frugiperda. The UiO-66-(COOH)₂ nanocarrier has an excellent pesticide loading performance, and the loading rate for IDC is 78.69%. The as-prepared PDS has good stability, temperature-responsive controllable release performance, and enhanced leaf affinity, so it can effectively improve the utilization rate of IDC. The insecticidal experiment indicates that the PDS has an enhanced control effect against S. frugiperda. In addition, biosafety analysis further verifies that the PDS exhibits no obvious negative effects on the germination of maize seeds and the growth of maize seedlings. In view of this, we believe that this PDS will have a broad application in the field of pesticide formulation innovation, pest management, and sustainable agricultural development.

Swelling and glyphosate-controlled release behavior of multi-responsive alginate-g-P(NIPAm-co-NDEAm)-based hydrogel

Intelligent controlled release systems (ICRS) displayed great achievement in agriculture by enhancing the utilization efficiency of agrochemicals. In this work, an intelligent graft copolymer (Alg-g-P(NIPAm-co-NDEAm)) with alginate (Alg) backbone and thermo-responsive poly(N-isopropyl acrylamide-co-N,N-diethylacrylamide) (P(NIPAm-co-NDEAm)) side chain was constructed as the matrix of ICRS through redox copolymerization, and its thermo-induced responsive property was studied. Then, the copolymer was mixed with a promising photothermal material semi-coke (SC) to form hydrogel beads (Ca-Alg-g-P(NIPAm-co-NDEAm)/SC) by ion crosslinking. The water absorbency of beads under different stimuli (pH, temperature, and light) presented outstanding responsive performance and the swelling mechanism was analyzed through coupling theory. Furthermore, the release of glyphosate (Gly) from Ca-Alg-g-P(NIPAm-co-NDEAm)/SC under environmental stimuli displayed regulatable behaviors. This multi-responsive hydrogel bead shows bright prospect in the sustainable advancement of crop production.

Stimuli-responsive Ca-alginate-based photothermal system with enhanced foliar adhesion for controlled pesticide release

For minimizing volatilization and leaching of pesticides, and enhancing their residence time on crop surfaces, we synthesized and characterized a novel intelligent pesticide delivery system. Therein, imidacloprid (IMI) was adsorbed by polydopamine modified kaolin (PK) with high adsorption property through hydrogen bonds. Ca-alginate was used as a structural matrix of the system and a protective shell to hinder the pesticide burst release from PK, and endowed the system with unique pH-sensitive property for IMI release. The amino silicone oil (ASO) coating could bind with the waxy layer of crop leaves by the theory of "similarity-intermiscibility", which increased the adhesion of composite on crop leaves. Moreover, by the excellent light-sensitive property of detonation nanodiamond (DND) and temperature-responsive performance of poly(N-isopropylacrylamide) (PNIPAm), the release of IMI from the functional system could be adjusted by sunlight. Besides, the composite displayed high control efficacy. This novel composite can promote the targeting ability and utilization efficiency of pesticides, thus having a huge potential application prospect in agriculture.

A novel electrochemiluminescence aptasensor for sensitive detection of kanamycin based on the synergistic enhancement effects between black phosphorus quantum dots and silver-decorated high-luminescence polydopamine nanospheres

Black phosphorus quantum dots (BPQDs), as a new type of nanomaterial, have excellent electrical and optical properties. In this work, an efficient monitoring method for kanamycin (KAN) was developed based on a sensitive and selective electrochemiluminescence (ECL) aptasensor. The construction of the ECL illuminant was based on BPQDs loaded on silver-nanoparticle modified high-luminescence polydopamine nanospheres (HLPNs@Ag). HLPNs possessed a large specific surface area and strong adhesion, which could support a great deal of BPQDs. Meanwhile, Ag NPs could accelerate the electron-transfer (ET) rate of the sensor and amplify the ECL signal of the BPQDs. Based on the synergistic enhancement effects between the above materials, the as-fabricated nanocomposites exhibited superior ECL performance. With the assistance of a KAN aptamer, the sensor can detect KAN sensitively and selectively. Under optimal conditions, the aptasensor could detect KAN in a wide linear range from 1 × 10^-12 to 1.0 × 10^-7 M with a detection limit of 1.7 × 10^-13 M (S/N = 3). More importantly, this ultra-sensitive and rapid ECL aptasensor-based KAN detection system provided excellent applicability for the monitoring of environmental safety.

Photo/thermal response of polypyrrole-modified calcium alginate/gelatin microspheres based on helix-coil structural transition and the controlled release of agrochemicals

Responsive controlled-release systems can not only improve the efficiency of agrochemical utilization but also increase crop yield and reduce environmental pollution caused by excessive use of agrochemicals. In this paper, the helix-coil structural transition of gelatin was adopted to construct a novel stimuli-responsive controlled-release system called polypyrrole/Ca-alginate/gelatin (PPy/Ca-alginate/Gel). In PPy/Ca-alginate/Gel, Ca-alginate and gelatin form a semi-interpenetrating network in which uncross-linked gelatin can undergo a free helix-coil structural transition due to the photothermal effect of PPy. The structural transition of gelatin will lead to changes in the functional groups and microstructure of semi-interpenetrating hydrogels and furthermore achieve the release of template agrochemical molecules embedded in hydrogels. By using carbendazim as a template molecule, the photothermal conversion and controlled release of PPy/Ca-alginate/Gel were systematically studied. After 600 s of light irradiation, its temperature could be increased by 17 ℃. The release of carbendazim in microspheres reached 91.8 % after 8 h of light irradiation, while it was only 13.3 % in the dark. The results indicated that PPy/Ca-alginate/Gel have excellent controlled-release and sustained-release properties and broad application potential in agriculture.

Polydopamine-modified collagen sponge scaffold as a novel dermal regeneration template with sustained release of platelet-rich plasma to accelerate skin repair: A one-step strategy

Although employed to release growth factors (GFs) for regenerative medicine, platelet-rich plasma (PRP) has been hindered by issues like burst effect. Based on collagen sponge scaffolds (CSSs) modified with polydopamine (pDA), a novel dermal regeneration template (DRT) was designed. However, whether it could efficiently deliver PRP and even foster wound healing remained unclear. In this work, after PRP was prepared and pDA-modified CSSs (pDA-CSSs) were fabricated, microscopic observation, GFs release assay and in-vitro biological evaluations of pDA-CSSs with PRP (pDA-CSS@PRP) were performed, followed by BALA-C/nu mice full-thickness skin defects implanted with pDA-CSS@PRP covered by grafted skins (termed as a One-step strategy). As a result, scanning electron microscope demonstrated more immobilized platelets on pDA-CSS' surface with GFs' controlled release via enzyme-linked immunosorbent assay, compared with CSSs. In line with enhanced in-vitro proliferation, adhesion and migration of keratinocytes & endothelial cells, pDA-CSS@PRP were histologically revealed to accelerate wound healing with less scar via rapid angiogenesis, arrangement of more mature collagen, guiding cells to spread, etc. In conclusion, pDA-CSSs have potential to serve as a novel DRT capable of delivering PRP, which may foster full-thickness skin defect healing by means of a One-step strategy.

Polydopamine-based nanomaterials and their potentials in advanced drug delivery and therapy

Polydopamine (PDA) has shown great potentials in biomedical fields due largely to its unique physicochemical properties, including high photothermal transfer efficiency, excellent drug binding capacity, versatile adhesion ability, sensitive pH responsibility and great biocompatibility and biodegradability. These properties confer PDA-based nanoparticles the potentials either as the drug carriers for advanced drug delivery or as the bioactive agents for photothermal therapy, imaging and biosensing. This review aims to provide a comprehensive understanding of PDA, its polymerization mechanisms and the potentials of PDA-based nano-systems in treating various diseases, including cancer, diabetes, inflammation, bacterial infection and Parkinson's disease. In addition, the concerns of PDA in biomedical use are also discussed.