Green and novel adsorbent from rice straw extracted cellulose for efficient adsorption of Hg (II) ions in an aqueous medium

A new insight into the straw decomposition associated with minerals: Promoting straw humification and Cd immobilization

Organic matter (OM) derived from the decomposition of crop residues plays a key role as a sorbent for cadmium (Cd) immobilization. Few studies have explored the straw decomposition processes with the presence of minerals, and the effect of newly generated organo-mineral complexes on heavy metal adsorption. In this study, we investigated the variations in structure and composition during the rice straw decomposition with or without minerals (goethite and kaolinite), as well as the adsorption behavior and mechanisms by which straw decomposition affects Cd immobilization. The degree of humification of extracted straw organic matter was assessed using excitation-emission matrix (EEM) fluorescence and Ultraviolet-visible spectroscopy (UV-vis), while employing FTIR spectroscopy and XPS to characterize the adsorption mechanisms. The spectra analysis revealed the enrichment of highly aromatic and hydrophobic components, indicating that the degree of straw decomposition and humification were further intensified during incubation. Additionally, the existence of goethite (SG) accelerated the humification of OM. Sorption experiments revealed that the straw humification increased Cd adsorption capacity. Notably, SG exhibited significantly higher adsorption performance compared to the organic matter without minerals (RS) and the existence of kaolinite (SK). Further analysis using FT-IR spectroscopy and XPS verified that the primary mechanisms involved in Cd immobilization were complexion with -OH and -COOH, as well as the formation of Cd-π binds with aromatic C=C on the surface of solid OMs. These findings will facilitate understanding the interactions of the rice straw decomposing with soil minerals and its remediation effect on Cd-contaminated farmland.

Tailoring of spherical nanocellulose via esterification with methionine followed by protonation to generate two different adsorbents for mercuric ions and Congo red

Herein, we report two different adsorbents from spherical nanocellulose (SNC) in successive steps, for the adsorption of Hg2+ ions and Congo red (CR). Cellulose extracted from pine needles was subsequently converted to SNC through mixed acidic hydrolysis. As-obtained SNC was esterified with methionine at C6 of the anhydroglucose unit of SNC to SNC-methionine ester (SNC-ME). The amino group of methionine residue in SNC-ME was protonated to SNC-PME with positive surface charge. The SNC-ME and SNC-PME were evaluated as Hg2+ ions and CR adsorbents, respectively. The SNC, SNC-ME, SNC-PME, Hg2+-loaded SNC-ME, and CR-loaded SNC-PME were characterized by FTIR, XRD, XPS, Zeta potential, BET, FESEM, EDS, and surface charge analysis. SNC-ME showed Hg2+ ions removal efficiency of 94.8 ± 1.9 % in 40 min, while SNC-PME showed CR removal efficiency of 96.1 ± 3.8 % in 90 min. The adsorption data of both the adsorbents fitted best into pseudo-second order kinetic and Langmuir isotherm. The maximum adsorption capacity of SNC-ME for Hg2+ ions was 211.5 ± 3.1 mg/g and that of SNC-PME for CR was 281.1 ± 7.1 mg/g. The astounding recyclability of the adsorbents for ten repeat cycles with significant cumulative adsorption capacity of 760.9 ± 12.8 mg/g for Hg2+ ions and 758.8 ± 12.7 mg/g for CR endorses their spectacular potentiality for wastewater treatment.

Cellulose-based adsorbent using in mercury detection and removal from water via an efficient grafting strategy of fluorometric sensors by click reaction

Mercury pollution in waters attracts lots of attention due to its serious toxicity and high bioenrichment and many efforts have been devoted in the development of adsorbents for mercury detection and removal. Herein, a cellulose-based adsorbent Cell-TriA-HQ is functionalized with quinoline fluorophore by covalent immobilization through "Click reaction" with high yield. In addition to the admirable adsorptive performance, the prepared adsorbent exhibits excellent selectivity and sensitivity towards Hg (II) in water that the detection limit for Hg (II) is determined to be as low as 1.92 × 10-7 M. The sensitive fluorescence enhancement response is considered to be resulted from the inhibition of photo-induced electron transfer between triazole and quinoline groups and the reinforcement of structural rigidity. The easy manipulation along with excellent performance of adsorption capacity, detective ability and reusability for the multifunctional adsorbent makes it potential in mercury monitoring and removal from aqueous solutions in the field of water treatment.

Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8

Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal-organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20-50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+‏.

Strategies for economic utilization of rice straw residues into value-added by-products and prevention of environmental pollution

Rice straw management, along with the prevalent practice of residue burning, poses multifaceted challenges with substantial environmental and human health implications. After harvest, a considerable amount of straw is left behind, often disposed of through burning, releasing several pollutants into the environment. Carbon dioxide (CO2) dominates at 70%, accompanied by methane (CH4) at 0.66%, carbon monoxide (CO) at 7%, and nitrous oxide (N2O) at 2.09%. This process further compounds issues by depleting soil nutrients like nitrogen and organic matter. This review focuses on strategies for residue management and using straw as value-added by-products. We address research gaps and offer potential recommendations for rice straw management using economically feasible and practical routes. We elaborate that to improve rice straw digestibility, utilization in mushroom cultivation, and other value-added products, low silica (Si) rice varieties must be developed using modern technologies including marker-assisted selection breeding or genome editing. Developing low Si rice could also reduce arsenic uptake by rice, as rice plants use the same transporters for the uptake of both elements. Conversely, silica is also indispensable for quality rice production; hence, optimizing silicon content in rice is worth investigating. More research is required to understand the extent of silicon's effect on the utilization of straw for various purposes. This review also discusses the importance of educating farmers about the straw burning issue and its environmental consequences. We highlight the significance of tailoring rice straw management methods to local suitability, moving away from a universal approach. More extension work is needed to encourage farmers to opt for environmentally and economically sound options for rice straw management. Policy intervention to incentivize farmers and develop technologies for the widespread use of rice straw for various industries and product development could help in the management of rice straw and will also create a circular economy.

Aminothiol supported dialdehyde cellulose for efficient and selective removal of Hg(II) from aquatic solutions

The increasingly serious problem of mercury pollution has caused wide concern, and exploring adsorbent materials with high adsorption capacity is a simple and effective approach to address this concern. In the recent study, dialdehyde cellulose (DAC), cyanoacetohydrazide (CAH), and carbon disulfide (CS2) are used as raw materials for the (DAC@CAH@SK2) preparation material through the three-steps method. By utilizing the following characterization techniques; thermogravimetric analysis (TGA), N2 adsorption-desorption isotherm (BET), elemental analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD), 1HNMR and Energy Dispersive X-ray Spectroscopy (EDS) of DAC@CAH@SK2 composite. The point of zero charge (pHPZC) for the prepared DAC@CAH@SK2 also was examined. From the batch experiments, the optimum conditions were found to be pH (5-8), an Hg2+ concentration of 150 mg/L, a DAC@CAH@SK2 dose of 0.01 g, and a contact time of 180 min with a maximum adsorption quantity of 139.6 mg/g. The process of Hg2+ adsorption on the DAC@CAH@SK2 material was spontaneous exothermic, monolayer chemisorption, and well-fitted to Langmuir and pseudo-2nd-order models. The DAC@CAH@SK2 selectivity towards the Hg2+ was examined by investigating the interfering metal ions effect. The DAC@CAH@SK2 was successfully applied for the Hg2+ removal from synthetic effluents and real wastewater samples with a recovery % exceeding 95%. The prepared DAC@CAH@SK2 was regenerated using a mixture of EDTA and thiourea. Also, FT-IR analysis indicates that the synergistic complexation of N and S atoms on DAC@CAH@SK2 with Hg(II) is an essential factor leading to the high adsorption capacity.

Study on the cyclic adsorption performance of biomass composite membrane for Hg(II)

Salix psammophila wood flour /polyvinyl alcohol hydrogel composite membrane (SPPM) with high adsorption capacity and good cycle adsorption performance was prepared by wet spinning technology. The SPPM was characterised by the scanning electron microscope (SEM), specific surface area test (BET), energy dispersive spectrum (EDS) thermal gravimetric analysis (TGA), fourier transform infrared spectroscopy (FT-IR), and x-ray photoelectron spectroscopy (XPS). The results showed that the surface of SPPM is rough and porous, with good pore structure and thermal stability, and mercury ions (Hg(II)) have been successfully adsorbed on SPPM. At the same time, the effects of adsorption conditions (Hg(II) initial concentration, pH, adsorption time, and temperature) on the adsorption performance of SPPM were studied. Results from the adsorption experiment showed that the adsorption capacity of SPPM for Hg(II) can reach 426 mg/g. After four adsorption and desorption experiments, the adsorption capacity can reach 375 mg/g, which indicates that SPPM has good cycle adsorption performance. The adsorption kinetics was better described by the Pseudo-second-order kinetic, and their adsorption isotherms were fitted for the Langmuir model. The obtained results showed that SPPM is an available, economical adsorbent and was found suitable for removing Hg(II) from an aqueous solution.

Advances in green materials derived from wood for detecting and removing mercury ions in water

The issue of mercury pollution in environmental remediation has garnered significant attention due to its severe health hazards to humans. Various strategies have been devised to mitigate the impact of toxic mercury ions, including coagulation, ion exchange, adsorption, membrane technology, and electrochemical treatment. Among these approaches, adsorption has emerged as an efficient and widely employed method for the uptake of low concentrations of mercury ions. It offers convenient operation, high removal efficiency, and facile regeneration of the adsorbent. Wood, being the most abundant renewable and sustainable bioresource, has garnered attention as a promising material for treating heavy metal wastewater. This is attributed to its unique physical and chemical characteristics, encompassing hierarchical pores, aligned channels, active functional groups, biodegradability, and cost-effectiveness. However, a comprehensive examination of the cutting-edge applications of wood and wood-derived biopolymers in the detection and removal of mercury ions from wastewater has yet to be undertaken. Consequently, this article presents a chronological overview of recent advancements in materials and structures derived from bulk wood and its constituents, including cellulose, lignin, hemicellulose, and tannin, with a specific focus on their utility in detecting and eliminating mercury from water sources. Subsequently, the most promising techniques and strategies involving wood and wood-derived biopolymers in addressing the predicament of mercury pollution are explored. Furthermore, this piece offers insights into the existing challenges and future prospects concerning environmentally friendly materials derived from wood, aiming to foster the development of cost-effective mercury adsorbents and detection devices.

Value addition of rice straw cellulose fibers as a reinforcer in packaging applications

The potential use of agro-waste in food packaging applications is receiving remarkable attention due to its sustainable approach and biodegradable properties. As typical lignocellulosic biomass, rice straw (RS) is widely produced but is usually abandoned and burned, causing tremendous environmental concerns. The exploration of using RS as the source of biodegradable packaging materials is promising for economically converting this agricultural waste into packaging material, thereby providing a considerable solution for RS disposal and an alternative solution to synthetic plastic waste. Polymers have been infused with nanoparticles, fibers, and whiskers, along with plasticizers and cross-linkers, and fillers like nanoparticles and fibers. They have also been blended with natural extracts, essential oils, and other synthetic and natural polymers to improve RS properties. There is still much research to be done before this biopolymer can be applied at an industrial level in food packaging. In this respect, RS can be valued for packaging to add value to these underutilized residues. This review article focuses on the extraction methods and functionality of cellulose fibers and their nanostructured forms from RS and their utilization in packaging applications.

Adsorptive performance and mechanism exploration of l-lysine functionalized celluloses for enhanced removal of Pb(II) from aqueous medium

In this study, two novel biosorbents of l-lysine grafted cellulose (L-PCM, L-TCF) were prepared for Pb(II) removal from aqueous solutions. Various adsorption parameters were surveyed, such as adsorbent dosages, initial concentration of Pb(II), temperature and pH, using adsorption techniques. At normal temperature, less adsorbent can achieve better adsorption capacity (89.71 ± 0.27 mg g^-1 with 0.5 g L^-1 of L-PCM, 16.84 ± 0.02 mg g^-1 with 3.0 g L^-1 of L-TCF). The pH range of application for L-PCM was 4-12 and that of L-TCF was 4-13. The adsorption of Pb(II) by biosorbents went through the boundary layer diffusion stage and void diffusion stage. The adsorption mechanism was chemisorption based on multilayer heterogeneous adsorption. The pseudo-second-order model fitted the adsorption kinetics perfectly. The Freundlich isotherm model adequately described Multimolecular equilibrium relationship between Pb(II) and biosorbents; the predicted maximum adsorption capacities of the two adsorbents were 904.12 and 46.74 mg g^-1, respectively. The results showed that the adsorption mechanism was the electrostatic attraction between Pb(II) and -COOH and the complexation between Pb(II) and -NH₂. This work demonstrated that l-lysine modified cellulose-based biosorbents have great potential in the field of Pb(II) removal from aqueous solutions.

Flax fiber based semicarbazide biosorbent for removal of Cr(VI) and Alizarin Red S dye from wastewater

In the present study, flax fiber based semicarbazide biosorbent was prepared in two successive steps. In the first step, flax fibers were oxidized using potassium periodate (KIO4) to yield diadehyde cellulose (DAC). Dialdehyde cellulose was, then, refluxed with semicarbazide.HCl to produce the semicarbazide functionalized dialdehyde cellulose (DAC@SC). The prepared DAC@SC biosorbent was characterized using Brunauer, Emmett and Teller (BET) and N2 adsorption isotherm, point of zero charge (pHPZC), elemental analysis (C:H:N), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses. The DAC@SC biosorbent was applied for the removal of the hexavalent chromium (Cr(VI)) ions and the alizarin red S (ARS) anionic dye (individually and in mixture). Experimental variables such as temperature, pH, and concentrations were optimized in detail. The monolayer adsorption capacities from the Langmuir isotherm model were 97.4 mg/g and 18.84 for Cr(VI) and ARS, respectively. The adsorption kinetics of DAC@SC indicated that the adsorption process fit PSO kinetic model. The obtained negative values of ΔG and ΔH indicated that the adsorption of Cr(VI) and ARS onto DAC@SC is a spontaneous and exothermic process. The DAC@SC biocomposite was successfully applied for the removal of Cr(VI) and ARS from synthetic effluents and real wastewater samples with a recovery (R, %) more than 90%. The prepared DAC@SC was regenerated using 0.1 M K2CO3 eluent. The plausible adsorption mechanism of Cr(VI) and ARS onto the surface of DAC@SC biocomposite was elucidated.

Adsorption of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose beads: Characterization, toxicity tests, and adsorption experiments

Mercury (Hg) is widely used in many industrial processes and is released into the environment. Therefore, efficient removal of Hg from water is of vital importance worldwide. Here, we explored the adsorption characteristics of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose (PEI-CMC) beads and studied the toxicity of the beads toward Daphnia magna and Pseudokirchneriella subcapitata. The PEI-CMC beads had an average particle size of 2.04 ± 0.25 mm, a point of zero charge (pH_pzc) of 5.8, and a swelling ratio of 2.45. Acute toxicity tests demonstrated that the PEI-CMC beads had no toxic effects on D. magna. The growth inhibition tests revealed that growth inhibition of P. subcapitata could be attributed to adsorption of trace elements in growth media on the PEI-CMC beads. The adsorption experiments exhibited that the Matthews and Weber model best described the kinetic data, whereas the Redlich-Peterson model was well fitted to the isotherm data. The theoretical maximum Hg(II) adsorption capacity of the PEI-CMC beads was 313.1 mg/g. The thermodynamic experiments showed endothermic nature of the Hg(II) adsorption on the PEI-CMC beads at 10-40 °C. The adsorption experiments exhibited that the Hg(II) adsorption capacity decreased gradually as pH increased from 2 to 12. The adsorption of Hg(II) on the PEI-CMC beads can occur through chelation and electrostatic attraction. The FTIR and XPS spectra before and after Hg(II) adsorption confirmed that chelation of neutral Hg(II) species (HgCl₂, HgClOH, and Hg(OH)₂) can occur with amino and oxygen-containing functional groups on the PEI-CMC beads. Considering species distribution of Hg(II) and the pH_pzc of the PEI-CMC beads, electrostatic attraction between the positively-charged beads and anionic Hg(II) species (HgCl₃^- and HgCl₄^2-) can take place in highly acidic solutions. The PEI-CMC beads were regenerated and reused for Hg(II) adsorption using 0.1 M HCl.

Highly fluorescent composite of boron nitride quantum dots decorated on cellulose nanofibers for detection and removal of Hg(II) ions from waste water

To address the challenge of heavy-metal ions in wastewater, boron nitride quantum dots (BNQDs) were synthesized in-situ on rice straw derived cellulose nanofibers (CNFs) as substrate. The composite system exhibited strong hydrophilic-hydrophobic interactions, as corroborated by FTIR, integrated the extraordinary fluorescence properties of BNQDs with fibrous-network of CNFs (BNQD@CNFs) yielding a surface of 35.147 m² g^-1 of luminescent fibers. Morphological studies revealed uniform distribution of BNQDs on CNFs due to hydrogen bonding, according high thermal stability with peak degradation occurring at 347.7 °C and quantum yield of 0.45. The nitrogen-rich surface of BNQD@CNFs exhibited strong affinity for Hg(II), quenching the fluorescence intensity due to combined inner-filter effect and photo-induced electron transfer. The limit of detection (LOD) and limit of quantification (LOQ) were 4.889 nM and 11.1 5 nM, respectively. BNQD@CNFs concomitantly exhibited adsorption of Hg(II) owing to strong electrostatic interactions, confirmed by X-ray photon spectroscopy. Presence of polar BN bonds favoured 96 % removal of Hg(II) at 10 mg L^-1 with maximum adsorption capacity of 314.5 mg/ g. Parametric studies corresponded to pseudo-second order kinetics and Langmuir isotherm with R² ≈ 0.99. BNQD@CNFs exhibited recovery rate between 101.3 %-111 % for real water samples and recyclability upto 5 cycles, demonstrating high potential in wastewater remediation.

Bioremediation of multifarious pollutants using laccase immobilized on magnetized and carbonyldiimidazole-functionalized cellulose nanofibers

An easily recyclable biocatalyst (Lac@CDI-MCNFs) was synthesized by immobilizing laccase on rice straw-derived carbonyldiimidazole mediated magnetized cellulose nanofibers (MCNFs). Lac@CDI-MCNFs were utilized for bioremediation of cefixime antibiotic (CT), carbofuran pesticide (CF) and safranin O dye (SO) via oxidation-reduction reactions in wastewater. MCNFs provided enhanced pH, temperature and storage stability to laccase and allowed reusability for up to 25 cycles with mere 20 % decline in efficacy. The Lac@CDI-MCNFs effectively degraded 98.2 % CT and 96.8 % CF into benign metabolites within 20 h and completely degraded SO in just 7 h. Response surface modelling (RSM) was employed based on the Box Behnken Design to evaluate the effect of various parameters i.e. pH, catalyst dosage and the pollutants concentration which was further validated with experimental studies. The degradation products were identified using LCMS, which allowed the degradation pathway of the pollutants to be determined. The degradation of all pollutants followed first- order kinetics with rate constants of 0.1775, 0.0832 and 0.958 h^-1 and half-life of 3.9, 5.0 and 0.723 h for CT, CF and SO, respectively. Lac@CDI-MCNFs was demonstrated to be an effective catalyst for the degradation of multifarious pollutants.

Selective mercury adsorption and enrichment enabled by phenylic carboxyl functionalized poly(pyrrole methane)s chelating polymers

Mercury decontamination from water requires highly effective and efficient methods for maintaining public health and environmental protection. Herein, based on the coordination theory between functional groups and metal ions, we proposed phenylic carboxyl group-based poly(pyrrole methane)s (PPDCBAs) as highly efficient mercury removal materials for environmental remediation applications. It was found that PPDCBAs can efficiently adsorb and remove mercury(II) from aqueous solutions by functionalizing the molecular structure with phenylic carboxyl groups. Among the as-prepared PPDCBAs, poly[pyrrole-2, 5-diyl (4-carboxybenzylidane)] (PPD4CBA) with the carboxyl group at the para position can not only adsorb mercury over 1400 mg⋅g^-1 but also achieve a 92.5 % mercury(II) uptake within 100 min by a very low dosage of 0.1 g⋅L^-1. In addition, PPDCBAs exhibited excellent adsorption selectivity for mercury(II) compared with copper(II), cadmium(II), zinc(II) and lead(II). Furthermore, as determined by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and the density functional theory (DFT) calculation, the mercury removal was found to be mainly dependent on the high density of chelating sites, the phenylic carboxyl moieties, which helped us to realize an ultra-trace amount mercury removal (from 10.8 μg⋅L^-1 to 0.6-0.8 μg⋅L^-1) for meeting drinking water standard requirements (1.0 μg⋅L^-1).

Competitive adsorption of nitrate, phosphate, and sulfate on amine-modified wheat straw: In-situ infrared spectroscopic and density functional theory study

Amine-modified wheat straw (AMWS) has already been reported as a promising adsorbent for nitrate (NO₃) removal due to its cost-effectiveness and high efficiency. However, the NO₃ removal mechanism has not been well understood, especially in the presence of co-existing ions. Here, the effect of co-existing anions on NO₃ removal by AMWS was investigated and the underlying mechanisms were revealed using a combination of in-situ infrared (IR) spectroscopy and computational modeling. The in-situ IR results indicated that NO₃, sulfate (SO₄), and phosphate (PO₄) are all adsorbed as outer-sphere complexes on AMWS. The two-dimensional-correlation spectroscopy analysis implied the adsorption sequence of SO₄ > PO₄ > NO₃. The adsorption energies obtained from density functional theory calculation range from -0.24 to 0.51 eV (-23.2 to 49.2 kJ/mol), confirming that these anions adsorb on AMWS as outer-sphere complexes. For the first time, this study provides direct spectroscopic evidence of the outer-sphere adsorption of NO₃ on AMWS, as well as identifies the adsorption sequence, confirmed by computational modeling. The competitive mechanism of NO_3, SO₄, and PO₄ revealed in this study is helpful to understand and predict the applications of AMWS.

Unravelling the role of hemp straw derived cellulose in CMC/PVA hydrogel for sustained release of fluoroquinolone antibiotic

Cellulose fibres derived from hemp stalks, a prevalent biowaste in Northern India, were effectively converted into carboxymethyl cellulose (HS-CMC). Novel environmentally benign hydrogels were synthesized from HS-CMC and polyvinyl alcohol (PVA) using citric acid, a green crosslinker employing freeze-drying method. The HS-CMC/PVA hydrogels were successfully used for sustained release of fluoroquinolone antibiotic, norfloxacin. The hydrogels were characterized using FTIR, XRD, FE-SEM, EDS and thermal stability and evaluated for their carbonyl content, swelling ratio, in-vitro drug release behaviour and bactericidal properties. Successful isolation of cellulose from hemp stalks and its conversion into hydrogel with the presence of ester and carbonyl linkages was confirmed by FTIR. Thermal stability was impaired when cellulose fibres were converted into HS-CMC via carboxymethylation, as the crystalline structure was utterly disrupted. For the hydrogel, the equilibrium swelling ratios at pH -1.2 and 7.4 were assessed as 378.4 % and 538.7 %, respectively, higher than reported CMC hydrogels. The norfloxacin (NFX) encapsulated hydrogels exhibited good bactericidal properties with zone of inhibition of 19.2 ± 0.3 mm against E. coli and 16.4 ± 0.4 mm against S. aureus. The in-vitro release of NFX at pH 1.2 was 91 %, higher than pH 7.4 at 82 % with strong adherence to Higuchi kinetics model signifying that the release of NFX is via dissolution and diffusion. The release kinetics at different pH revealed Fickian behaviour establishing the potential of HS-CMC hydrogel for sustained release of norfloxacin.

Valorization of sugarcane bagasse for sugar extraction and residue as an adsorbent for pollutant removal

Following juice crushing for sugar or bioethanol production from sugarcane, bagasse (SCB) is generated as the main lignocellulosic by-product. This study utilized SCB generated by a hydraulic press as feedstock to evaluate sugar extraction as well as adsorption potential. Total soluble sugar (sucrose, glucose, and fructose) of 0.4 g/g SCB was recovered with H2O extraction in this case. Insoluble sugar, that is, cellulose in SCB, was further hydrolyzed into glucose (2%–31%) with cellulase enzyme, generating a new bagasse residue (SCBE). Persulfate pretreatment of SCB slightly enhanced saccharification. Both SCB and SCBE showed great potential as adsorbents with 98% of methylene blue (MB) removed by SCB or SCBE and 75% of Cu2+ by SCBE and 80% by SCB in 60 min. The maximum adsorption amount (qm) was 85.8 mg/g (MB by SCB), 77.5 mg/g (MB by SCBE), 3.4 mg/g (Cu2+ by SCB), and 1.2 mg/g (Cu2+ by SCBE). The thermodynamics indicated that the adsorption process is spontaneous, endothermic, and more random in nature. The experimental results offer an alternative to better reutilize SCB.

Resource utilization of pig hair to prepare low-cost adsorbents with high density of sulfhydryl for enhanced and trace level removal of aqueous Hg(II)

Pig hair (PH), a keratinous waste, was modified by ammonium thioglycolate in a ball milling to promote its performance of Hg(II) sequestration. The ball milling broke the hydrophobic cuticle sheath and enhanced the reduction of disulfide bond, which increased the sulfydryl content of the modified PH (BTPH) from 0.07 to 11.05 μmol/g. BTPH exhibited a significantly higher capture capacity of Hg(II) (415.4 mg/g) than PH (3.1 mg/g), as well as the commercial activated carbon (219.7 mg/g), and persisted its performance over a wide range of solution pH. Meanwhile, BTPH with a distribution coefficient of 5.703 × 10⁵ mL/g could selectively capture Hg(II) from the water with the coexisting metal ions such as Mg(II), Cd(II) and Pb(II). Moreover, the low-cost BTPH could reduce the Hg(II) from 1.0 mg/L to well below the limit of drinkable water (2 μg/L) in real-world samples. Density functional theory (DFT) calculations and state-of-the-art characterizations illustrated that the binding of Hg(II) to sulfydryl groups was the main adsorption mechanism. Notably, BTPH decreased the mercury content of water spinaches from 24.1 to 0.50 mg/kg and thereby significantly reduced the phytotoxicity of Hg(II). This work therefore provides a sustainable way to utilize keratinous wastes for the remediation of aqueous Hg(II).

Cement-Based Solidification/Stabilization as a Pathway for Encapsulating Palm Oil Residual Biomass Post Heavy Metal Adsorption

Heavy metal pollution is a serious issue currently affecting the environment and public health, which has been faced by applying several alternatives such as adsorption. In this work, the adsorption technique was employed to remove nickel and lead ions from an aqueous solution using palm oil residual biomass as a biosorbent. Desorption experiments were also conducted to evaluate the desorption capacity of this biomass over sorption-desorption cycles. The polluted biomass was used to prepare bricks (5 and 10% biomass content) to encapsulate heavy metal ions into the cement matrix. Both mechanical resistance and leaching testing were performed to determine the suitability of these bricks for construction applications. The experimental results revealed a good biosorbent dosage of 0.1 g/L. The highest desorption yields were calculated in 11 and 83.13% for nickel and lead, respectively. The compression resistance when 10% biomass was incorporated into the bricks was reported to be below the acceptable limit. Leaching testing suggested a successful immobilization of heavy metal ions onto the cement matrix. These results indicate that the application of this immobilization technique allows solving disposal problems of biomass loaded with heavy metal ions.

A Review on Nanocellulose and Superhydrophobic Features for Advanced Water Treatment

Globally, developing countries require access to safe drinking water to support human health and facilitate long-term sustainable development, in which waste management and control are critical tasks. As the most plentiful, renewable biopolymer on earth, cellulose has significant utility in the delivery of potable water for human consumption. Herein, recent developments in the application of nanoscale cellulose and cellulose derivatives for water treatment are reviewed, with reference to the properties and structure of the material. The potential application of nanocellulose as a primary component for water treatment is linked to its high aspect ratio, high surface area, and the high number of hydroxyl groups available for molecular interaction with heavy metals, dyes, oil-water separation, and other chemical impurities. The ability of superhydrophobic nanocellulose-based textiles as functional fabrics is particularly acknowledged as designed structures for advanced water treatment systems. This review covers the adsorption of heavy metals and chemical impurities like dyes, oil-water separation, as well as nanocellulose and nanostructured derivative membranes, and superhydrophobic coatings, suitable for adsorbing chemical and biological pollutants, including microorganisms.

Multifunctional Cellulose and Cellulose-Based (Nano) Composite Adsorbents

In recent years, faced with the improvement of environmental quality problems, cellulose and cellulose-based (nano) composites have attracted great attention as adsorbents. In this review article, we first report the recent progress of modification and functionalization of cellulose adsorbents. In addition, the adsorbents produced by the modification and functionalization of carboxymehyl cellulose are also introduced. Moreover, the cellulose-based (nano) composites as adsorbents are reviewed in detail. Finally, the development prospect of cellulose and cellulose-based (nano) composites is studied in the field of the environment. In this review article, a critical comment is given based on our knowledge. It is believed that these biomass adsorbents will play an increasingly important role in the field of the environment.

Prospects of titanium carbide-based MXene in heavy metal ion and radionuclide adsorption for wastewater remediation: A review

Contamination of water sources with various organic and inorganic non-biodegradable pollutants is becoming a growing concern due to industrialization, urbanization, and the inefficiency of traditional wastewater treatment processes. Transition Metal Carbides/Nitrides (MXenes) are emerging as advanced nanomaterials of choice for treating contaminated water owing to their excellent conductivity, mechanical flexibility, high specific surface area, scalable production, rich surface functionalities, and layered morphology. MXenes have demonstrated enhanced ability to adsorb various organic and inorganic contaminants depending upon their surface terminal groups (-OH, -F, and -O) and interlayer spacing. Titanium carbide (Ti₃C₂T_x) is most researched to date due to its ease of processing and stability. Ti₃C₂T_x has shown excellent performance in absorbing heavy metal ions and radioactive heavy metals. This review summarizes state-of-the-art Ti₃C₂T_x synthesis, including selective etching techniques, optimization of the desired adsorption features (controlling surface functional groups, intercalation, sonication, and functionalization), and regeneration and adsorption mechanism to remove contaminants. Furthermore, the review also compares the adsorption performance of Ti₃C₂T_x with other commercial adsorbents (including chitosan, cellulose, biomass, and zeolites). Ti₃C₂T_x has been found to have an adsorption efficiency of more than 90% in most studies due to its layered structure, which makes the functional groups easily accessible, unique and novel compared to other conventional nanomaterials and adsorbents. The challenges, potential solutions, and prospects associated with the commercial development of Ti₃C₂T_x as adsorbents are also discussed. The review establishes a framework for future wastewater treatment research using MXenes to address the global problem of water scarcity.

Electrospun molecularly imprinted sodium alginate/polyethylene oxide nanofibrous membranes for selective adsorption of methylene blue

Molecular imprinting technique is an efficient method to improve the selective adsorption capacity for the target pollutant. In this study, sodium alginate/polyethylene oxide molecularly imprinted nanofibrous membrane (SA/PEO-MINM) with average diameter of 185 ± 20 nm was successfully synthesized by electrospinning for selective adsorption of methylene blue (MB). Benefiting from the molecular imprinted technology, the adsorption amount of SA/PEO-MINM for MB was increased by about 65%, significantly higher than the non-imprinted membrane. Results showed that the adsorption equilibrium could be well fitted with Langmuir isotherm model and the maximum adsorption capacity towards MB was 3186.7 mg/g. Kinetic experiments well complied with the Pseudo second order model. Reusability studies indicated that the removal efficiency of MB could maintain 93% of the original adsorption capacity after four consecutive adsorption/desorption cycles. More importantly, the SA/PEO-MINM with high surface area and specific adsorption recognition sites showed excellent selective adsorption capacity in the adsorption experiment of MB and methylene orange mixed dye solution. In general, the SA/PEO-MINM can be successfully applied for the selective removal of MB from dye wastewater.

Preparation and adsorption performance of cellulose nanofibrils/polyvinyl alcohol composite gel spheres with millimeter size

Wastewater treatment is a huge problem facing human beings. The development of recyclable and efficient adsorption materials is of great benefit to solve the problem. Based on the biodegradable cellulose nanofibers (CNFs) derived from biomass resources, the large sized CNFs/PVA composite hydrogel spheres (CV-HSs, 1-3 mm) were successfully prepared by the inverse suspension pellet-forming technology using the polymers as raw materials, and another hydrophobic CNFs/PVA composite aerogel spheres (HCV-ASs) were also obtained by lyophilization and followed silylation of as-prepared CV-HSs. The CV-HSs showed excellent adsorption properties for simulated pollutants, including Cu²⁺, phenol and aniline in water. The maximum absorption capacity of CV-HSs was 17.22 mmol/g for Cu²⁺, 176.72 mg/g for phenol and 341.93 mg/g for aniline respectively. The HCV-ASs exhibited good absorption properties for weak polar organic solvents, such as petroleum ether, ethyl acetate and toluene. In summary, two kinds of large-sized CNFs/PVA composite gel spheres were successfully fabricated, and exhibited good adsorption properties for organic pollutants and heavy metal ions, indicating their potential for wastewater treatment.

Highly effective removal of Hg(ii) solution using corn bract@MoS2 as a new biomass adsorbent

As known, mercury contamination is one of the current environmental issues due to the high toxicity of mercury.

Coupling Adsorption-Photocatalytic Degradation of Methylene Blue and Maxilon Red

The MB and MR removal process by two mechanisms of adsorption using rice straw (absence of UV light) and photodegradation on TiO₂ surfaces was investigated. MB and MR removal efficiency were further intensified upon the sequential operation of adsorption followed by photocatalytic degradation over TiO₂ under visible light irradiation. The TiO₂ was used to remove methylene blue (MB) and Maxilon Red (MR) dye from aqueous media by continuous mode at 25 ± 2 °C, at pH 6.8 ± 0.2. Photo-illumination study revealed 75.81 and 65.51% MB and MR removal with the dose of 1 g/L TiO₂ with an initial concentration of 5 mg/L within 120 min. This study can be deemed of potential applications for the removal of MB and MR dyes on an industrial level using the synergistic adsorption-photocatalytic oxidation approach. A probable photodegradation mechanism was proposed.

The Effect of Dicarboxymethyl Cellulose on the Prevention of Protein Haze Formation on White Wine

Wine clarity is a critical aspect in the commercialization of white wines. The formation of wine haze can be attributed to the aggregation and precipitation of heat-unstable wine proteins. Bentonite fining is the commonly used method in winemaking for protein removal, but it is responsible for loss of wine volume and quality. Dicarboxymethyl cellulose (DCMC) was developed as a potential alternative to bentonite. Water-insoluble DCMC was prepared via catalyzed heterogeneous etherification using sodium chloromalonate and potassium iodide. White wine fining trials were benchmarked with different dosages of DCMC against a bentonite. A high-performance liquid chromatography method was optimized for protein quantification. The samples underwent heat stability tests to evaluate wine turbidity before and after fining. Results show that DCMC successfully reduced the wine protein content and turbidity. DCMC produced heat-stable wines with dosages higher than 0.25 g/L. The innovative application of DCMC in the wine sector shows potential due to its ability to stabilize white wines while overcoming problems associated with bentonite, such as lees production and loss of wine, contributing to a more sustainable process.

Preparation of a rice straw-based green separation layer for efficient and persistent oil-in-water emulsion separation

Inefficiency, high cost, and complex operation have emerged as shackles for large-scale separate oil-in-water emulsion. Herein, a low-cost and eco-friendly separation layer with a rough structure and rich anionic groups was fabricated from rice straw (RS) via a simple acid-base treatment and slight squeeze process. The separation layer's morphology, composition, and wettability were investigated. It was then employed to separate oil-in-water emulsion. The RS after acid and alkali treatment (A₁A₂-RS) exhibited a clear fiber structure and abundant humps, which made the separation layer superwettable and highly electronegative (-26.55 mV). The overlapped and intertwined A₁A₂-RS layer structure owned a superior performance for hexadecyl-trimethyl-ammonium-bromide (CTAB) adsorption and tiny oil interception. As a result, the separation layer had stable fluxes (>500 LMH) for multiple CTAB-stabilized emulsions and the obtained filtrates performed low total organic carbon (TOC) contents (<30 mg/L). In addition, the A₁A₂-RS layer had excellent renewability (10 cycles/ 200 mL) and the flux could be substantially recovered merely by aqueous wash. Moreover, filtrate analysis showed that the A₁A₂-RS layer had a good effect on actual emulsion treatment with a TOC removal rate of 89.56%.

Isolation and Characterization of Magnetic Oil Palm Empty Fruits Bunch Cellulose Nanofiber Composite as a Bio-Sorbent for Cu(II) and Cr(VI) Removal

In the present study, magnetic oil palm empty fruits bunch cellulose nanofiber (M-OPEFB-CNF) composite was isolated by sol-gel method using cellulose nanofiber (CNF) obtained from oil palm empty fruits bunch (OPEFB) and Fe₃O₄ as magnetite. Several analytical methods were utilized to characterize the mechanical, chemical, thermal, and morphological properties of the isolated CNF and M-OPEFB-CNF. Subsequently, the isolated M-OPEFB-CNF composite was utilized for the adsorption of Cr(VI) and Cu(II) from aqueous solution with varying parameters, such as pH, adsorbent doses, treatment time, and temperature. Results showed that the M-OPEFB-CNF as an effective bio-sorbent for the removal of Cu(II) and Cr(VI) from aqueous solution. The adsorption isotherm modeling revealed that the Freundlich equation better describes the adsorption of Cu(II) and Cr(VI) on M-OPEFB-CNF composite. The kinetics studies revealed the pseudo-second-order kinetics model was a better-described kinetics model for the removal of Cu(II) and Cr(VI) using M-OPEFB-CNF composite as bio-sorbent. The findings of the present study showed that the M-OPEFB-CNF composite has the potential to be utilized as a bio-sorbent for heavy metals removal.

Fabrication of Highly Porous Polymeric Nanocomposite for the Removal of Radioactive U(VI) and Eu(III) Ions from Aqueous Solution

In the present study, a polymeric nanocomposite, CoFe2O4@DHBF, was fabricated using 2,4 dihydroxybenzaldehyde and formaldehyde in basic medium with CoFe2O4 nanoparticles. The fabricated nanocomposite was characterized using FTIR, TGA, XRD, SEM, TEM, and XPS analyses. The analytical results revealed that the magnetic nanocomposite was fabricated successfully with high surface area 370.24 m2/g. The fabricated CoFe2O4@DHBF was used as an efficient adsorbent for the adsorption of U(VI) and Eu(III) ions from contaminated water. pH, initial concentration, adsorption time, and the temperature of the contaminated water solution affecting the adsorption ability of the nanocomposites were studied. The batch adsorption results exposed that the adsorption capacity for the removal of U(VI) and Eu(III) was found to be 237.5 and 225.5 mg/g. The adsorption kinetics support that both the metal ions follow second order adsorption kinetics. The adsorption isotherm well fits with the Langmuir adsorption isotherm and the correlation coefficient (R2) values were found to be 0.9920 and 0.9913 for the adsorption of U(VI) and Eu(III), respectively. It was noticed that the fabricated nanocomposites show excellent regeneration ability and about 220.1 and 211.3 mg/g adsorption capacity remains with U(VI) and Eu(III) under optimum conditions.

Preparation of a Novel Zn(II)-Imidazole Framework as an Efficient and Regenerative Adsorbent for Pb, Hg, and As Ion Removal From Water

An outstanding metal-organic framework sorbent (Zn-MOF) was prepared using Zn²⁺ and 3-amino-5-mercapto-1,2,4-triazole to eliminate toxic metal ions from water. Zn-MOF was detected via using Fourier-transform infrared (FTIR) spectroscopy, field-emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET) analysis, and X-ray photoelectron spectroscopy (XPS). Zn-MOF is stable and has a very large surface area. The uptake properties of Zn-MOF were investigated. The maximum uptake capacity of Zn-MOF for Pb, Hg, and As ions was 1097, 32, and 718 mg/g, respectively. This was obtained at pH = 4, 5, and 6, respectively. The adsorption data is in good agreement with the Langmuir and pseudo-second-order rate models, indicating that the uptake process of Zn-MOF for toxic metal ions was a single layer uptake on a uniform surface via exchange of valence electrons. Thermodynamics shows that the uptake process is autogenic and endothermic. Zn-MOF can be reused at least 6 times. Mercury and lead strongly coordinated with Zn-MOF. The interaction between arsenic and Zn-MOF is weak chemical coordination and ion exchange. Zn-MOF has wide application prospects for toxic metal ion elimination.