Synthesis of Co3S4-SnO2/polyvinylpyrrolidone-cellulose heterojunction as highly performance catalyst for photocatalytic and antimicrobial properties under ultra-violet irradiation

A 2D nanoflower-like ordered mesoporous Bi12ZnO20 catalyst with excellent photocatalytic antibacterial properties

The ordered mesoporous ZnO was successfully synthesized using the template method in this article, and Bi ions were etched into ZnO to form two-dimensional nanoflower structures of Bi12ZnO20 with NA3SSA as a guiding agent. The crystal structure, morphology, and optical properties of the photocatalyst were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), energy-dispersive spectrometer(EDS), and ultraviolet-visible diffuse reflectance spectrum (UV-vis DRS). Under illumination conditions, the obtained materials exhibited excellent bactericidal ability against both gram-positive and gram-negative bacteria, as well as effective inhibition against fungi. Among them, the bactericidal effect of Pseudomonas aeruginosa was found to be the most rapid, achieving a sterilization rate of 100% within 30 min of light irradiation. Even after three cycles of antibacterial activity testing, the Bi12ZnO20 material still demonstrated good photocatalytic performance. The nanoflower-shaped materials provide an enhanced fluid adsorption capacity and more active centers for photocatalytic reactions while also improving light absorption capacity, photogenerated electron-hole separation efficiency, and electron transport efficiency. The cytotoxicity assessment of Bi12ZnO20 revealed no significant toxic effects. Therefore, this study presents a nanoflower-shaped material with highly efficient photocatalytic antibacterial properties for applications in production and daily life; it holds significant importance in eliminating harmful bacteria and plays a crucial role in environmental protection.

IMPORTANCE

The flower-shaped photocatalytic material Bi12ZnO20, consisting of nanoparticles, was successfully synthesized in this study. Rigorous antibacterial experiments were conducted on various fungi using the material, yielding excellent results. Furthermore, the application of this material for antibacterial treatment of livestock and poultry manure sewage in real-life scenarios demonstrated remarkable efficacy.

Recent Developments and Perspectives of Cobalt Sulfide-Based Composite Materials in Photocatalysis

Photocatalysis, as an inexpensive and safe technology to convert solar energy, is essential for the efficient utilization of sustainable renewable energy sources. Earth-abundant cobalt sulfide-based composites have generated great interest in the field of solar fuel conversion because of their cheap, diverse structures and facile preparation. Over the past 10 years, the number of reports on cobalt sulfide-based photocatalysts has increased year by year, and more than 500 publications on the application of cobalt sulfide groups in photocatalysis can be found in the last three years. In this review, we initially summarize the four common strategies for preparing cobalt sulfide-based composite materials. Then, the multiple roles of cobalt sulfide-based cocatalysts in photocatalysis have been discussed. After that, we present the latest progress of cobalt sulfide in four fields of photocatalysis application, including photocatalytic hydrogen production, carbon dioxide reduction, nitrogen fixation, and photocatalytic degradation of pollutants. Finally, the development prospects and challenges of cobalt sulfide-based photocatalysts are discussed. This review is expected to provide useful reference for the construction of high-performance cobalt sulfide-based composite photocatalytic materials for sustainable solar-chemical energy conversion.

Collagen and Silk Fibroin as Promising Candidates for Constructing Catalysts

A catalyst determines the mechanism of an organic chemical reaction, thus enabling the commercially viable formation of desired material products. Biopolymers offer new opportunities for the construction of catalysts by virtue of their biocompatibility, environmental benignity, and sustainability, as well as their low cost. Biopolymers are especially useful as carriers and precursors in catalysis application. The employment of biocompatible and biosustainable collagen and silk fibroin materials will revolutionize state-of-the-art electronic devices and systems that currently rely on conventional technologies. In this review, we first consider the ordered hierarchical structure, origin, and processing methods of collagen and silk fibroin. Then, the unique advantages and applicability of collagen and silk fibroin for constructing catalysts are summarized. Moreover, a summary of the state-of-the-art design, fabrication, and application of collagen- and silk fibroin-based catalysts, as well as the application of collagen- and silk-based catalysts, is presented by focusing on their roles as carriers and precursors, respectively. Finally, challenges and prospects are assessed for the construction and development of collagen and silk fibroin-based catalysts.

Thermally activated persulfate oxidation of ampicillin: Kinetics, transformation products and ecotoxicity

The heat-activated persulfate system showed encouraging results for the destruction of the widely used antibiotic Ampicillin (AMP). AMP removal follows exponential decay, and the observed kinetic constant was enhanced with persulfate (PS) dosage at the range 50-500 mg L^-1 and temperature (40-60 °C), while AMP thermolysis at 60 °C was almost negligible. The apparent activation energy was estimated to 124.7 kJ mol^-1_. Alkaline conditions, water matrix constituents like bicarbonates, humic acid, and real water matrices retarded AMP oxidation. Experiments performed with tert-butanol and methanol as scavengers demonstrated the contribution of sulfate radicals as the dominant reactive species. Seven transformation products (TPs) of AMP have been identified from AMP destruction. An EC₅₀ value equal to 187 mg L^-1 was calculated for 72 h of exposure of the microalgae Chlorella sorokiniana to AMP. According to the ecotoxicity experiments that conducted after treatment of AMP with PS for different reaction times, no important inhibition of microalgae was noticed for contact time of 72 h and 10 d. These results indicate the formation of no toxic AMP by-products for the applied experimental conditions.

In-silico identification of lysine residue for α-Amylase immobilization on dialdehyde cellulose

Enzymes are the precious gift of nature to humans. The wise utilization of enzymes may reduce energy needs of humans and the Immobilization technique can help a lot in this regard. This aspect overcomes limitations of the enzymes, therefore providing an opportunity to explore enzymatic chemistry further. In the present context, it is quite cumbersome & costly to identify the amino acid of enzymes involved in the covalent mode of Immobilization. In the present study, molecular modeling techniques were used to do this difficult task. The present work used molecular modeling methods to extract information about the immobilization of α-Amylase (E.C.3.2.1.1) on Dialdehyde Cellulose. The Lysine residue is the most probable residue to interact with Dialdehyde Cellulose. In the present work, a total of 23 lysine residues were used to study covalent binding behavior with α-Amylase. It was found that if Lys142 is involved in binding with Dialdehyde Cellulose then binding affinity (-6.1 & -5.9 kcal mol-1), as well as the involvement of amino acids of both free α-Amylase and Lys142 immobilized α-Amylase with the starch substrate, were found to be similar. The technique reported here is used for the identification of amino acid residue for the Immobilization of enzymes.

Fabrication of Cu2MoS4 decorated WO3 nano heterojunction embedded on chitosan: Robust photocatalytic efficiency, antibacterial performance, and bacteria detection by peroxidase activity

In this study, the Cu2MoS4/WO3 supported on chitosan was prepared by precipitation method, and applied to photocatalyst, antibacterial agent and biosensor. The presence of WO3 and Cu2MoS4 crystals were confirmed by XRD analysis. The elemental information was investigated by EDS. FTIR spectra shows the presence of chitosan in nanocomposites. The as-synthesized Cu2MoS4/WO3/Chitosan nanocomposites has a bandgap of 2.18 eV and it is effective for visible light condition. The average particle size of the Cu2MoS4/WO3/Chitosan is 71 nm. The photocatalysis activity Cu2MoS4/WO3/Chitosan was higher than Cu2MoS4 or WO3.The Cu2MoS4/WO3/Chitosan nanocomposites shows the highest efficiency (100%) in photocatalysis degradation of dye under visible light irradiation in 80 min. The •O2- plays a main role in degradation process. The as-synthesized Cu2MoS4/WO3/Chitosan nanocomposites depicted the antibacterial activity toward G+/- bacteria. Determination of enterococcus faecalis is important for human health. The DNA template was used to the Cu2MoS4/WO3/Chitosan nanocomposites and applied in detection of enterococcus faecalis by H2O2 and 3,3',5,5' -tetramethylbenzidine in peroxidase like activity. The detection limit of enterococcus faecalis by DNA-Cu2MoS4/WO3/Chitosan in peroxidase-like catalysis was about 55 CFU/mL. Therefore, the Cu2MoS4/WO3/Chitosan can be applied in the photocatalysis, bactericidal and peroxidase process.

Microwave assisted green synthesis of silver nanoparticles for optical, catalytic, biological and electrochemical applications

Plant-derived nanoparticles have multi-functionalities owing to their ecological origin and biocompatible nature. A novel and stable silver nanoparticle (AgNP) was reported here using Cyanthillium cinereum (C. cinereum) as a reducing as well as capping agent by rapid microwave-assisted green method. The synthesized nanoparticles revealed their crystalline and spherical nature with an average size of 19.25 ± 0.44 nm in HR-TEM analysis. The excitation of electrons from occupied d-bands to states above the Fermi level while employing photoluminescence studies of AgNP indicated their awesome optical properties. Rapid decomposition of dangerous organic dyes like methylene blue and fuchsine in the catalytic presence of AgNP was evidenced from simple UV-visible spectral analysis. In vitro antioxidant potential assessed by DPPH assay indicated an IC50 value of 40.80 ± 0.14 μg/mL for the new AgNP. A substantial control on the growth of pathogenic bacteria such as Staphylococcus aureus and Klebsiella pneumonia can be achieved by synthesized nanoparticles as demonstrated by the well diffusion method. AgNP was also functioned as a non-enzymatic electrochemical sensor with a sharp oxidation peak with peak potentials at 0.366 V and it has a wide application as a bio sensor in neurobiology especially in the detection of neurotransmitters like dopamine with high sensitivity.

Cellulose-deconstruction potential of nano-biocatalytic systems: A strategic drive from designing to sustainable applications of immobilized cellulases

Nanostructured materials along with an added value of polymers-based support carriers have gained high interest and considered ideal for enzyme immobilization. The recently emerged nanoscience interface in the form of nanostructured materials combined with immobilized-enzyme-based bio-catalysis has now become research and development frontiers in advance and applied bio-catalysis engineering. With the involvement of nanoscience, various polymers have been thoroughly developed and exploited to nanostructured engineer constructs as ideal support carriers/matrices. Such nanotechnologically engineered support carriers/matrix possesses unique structural, physicochemical, and functional attributes which equilibrate principal factors and strengthen the biocatalysts efficacy for multipurpose applications. In addition, nano-supported catalysts are potential alternatives that can outstrip several limitations of conventional biocatalysts, such as reduced catalytic efficacy and turnover, low mass transfer efficiency, instability during the reaction, and most importantly, partial, or complete inhibition/deactivation. In this context, engineering robust and highly efficient biocatalysts is an industrially relevant prerequisite. This review comprehensively covered various biopolymers and nanostructured materials, including silica, hybrid nanoflower, nanotubes or nanofibers, nanomembranes, graphene oxide nanoparticles, metal-oxide frameworks, and magnetic nanoparticles as robust matrices for cellulase immobilization. The work is further enriched by spotlighting applied and industrially relevant considerations of nano-immobilized cellulases. For instance, owing to the cellulose-deconstruction features of nano-immobilized cellulases, the applications like lignocellulosic biomass conversion into industrially useful products or biofuels, improved paper sheet density and pulp beat in paper and pulp industry, fruit juice clarification in food industry are evident examples of cellulases, thereof are discussed in this work.

Lignin peroxidase in focus for catalytic elimination of contaminants - A critical review on recent progress and perspectives

Lignin peroxidase (LiP) seems to be a catalyst for cleaving high-redox potential non-phenolic compounds with an oxidative cleavage of CC and COC bonds. LiP has been picked to seek a practical and cost-effective alternative to the sustainable mitigation of diverse environmental contaminants. LiP has been an outstanding tool for catalytic cleaning and efficient mitigation of environmental pollutants, including lignin, lignin derivatives, dyes, endocrine-disrupting compounds (EDCs), and persistent organic pollutants (POPs) for the past couple of decades. The extended deployment of LiP has proved to be a promising method for catalyzing these environmentally related hazardous pollutants of supreme interest. The advantageous potential and capabilities to act at different pH and thermostability offer its working tendencies in extended environmental engineering applications. Such advantages led to the emerging demand for LiP and increasing requirements in industrial and biotechnological sectors. The multitude of the ability attributed to LiP is triggered by its stability in xenobiotic and non-phenolic compound degradation. However, over the decades, the catalytic activity of LiP has been continuing in focus enormously towards catalytic functionalities over the available physiochemical, conventional, catalyst mediated technology for catalyzing such molecules. To cover this literature gap, this became much more evident to consider the catalytic attributes of LiP. In this review, the existing capabilities of LiP and other competencies have been described with recent updates. Furthermore, numerous recently emerged applications, such as textile effluent treatment, dye decolorization, catalytic elimination of pharmaceutical and EDCs compounds, have been discussed with suitable examples.

Cationic zinc (II) phthalocyanine nanoemulsions for photodynamic inactivation of resistant bacterial strains

BACKGROUND

The growing emergence of microbial resistance to antibiotics represents a worldwide challenge. Antimicrobial photodynamic inactivation (aPDI) has been introduced as an alternative technique, especially when combined with nanotechnology. Therefore, this study was designed to investigate the therapeutic merits of combined aPDI and nanoemulsion in infections caused by resistant bacterial strains.

METHODS

Cationic zinc (II) phthalocyanine nanoemulsions (ZnPc-NE) were prepared using isopropyl myristate (IPM) as oil phase, egg phosphatidylcholine (egg PC) as emulsifier, and N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB). Nanoemulsions were characterized for particle size, polydispersity, zeta potential, viscosity, and skin deposition. The in-vitro aPDI was investigated on human resistant pathogens; gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and gram-negative Multidrug-resistant strain of Escherichia coli (MDR E. coli), under different experimental conditions. In addition, in-vivo model of abrasion wound infected by MDR E. coli was induced in rats to investigate the therapeutic potential of the selected formulation.

RESULTS

It was evident that the selected ZnPc formulation (20 % IPM, 2 % egg PC and 0.5 % CTAB) displayed a particle size of 209.9 nm, zeta potential +73.1 mV, and 23.66 % deposition of ZnPc in skin layers. Furthermore, the selected formulation combined with light achieved almost 100 % eradication of the two bacterial strains, with superior bacterial load reduction and wound healing propertiesin-vivo, compared to either the nanoemulsion formulation or laser alone.

CONCLUSION

ZnPc nanoemulsion improved antimicrobial photodynamic therapy in inactivating resistant bacterial infections and provided a promising therapeutic means of treating serious infections, and hence could be applied in diseases caused by other bacterial strains.

Triphenylphosphonium-functionalized nanocomposites as carriers of a platinum diimine complex for photodynamic therapy

The photodamage induced by PDT usually occurs at the site where the photosensitizers accumulate in the tumor cells, thus the modulation of intrinsic apoptosis by mitochondria-targeting PDT drugs might be a promising way to enhance the therapeutic efficacy of PDT drugs against tumor cells. Novel triphenylphosphonium-functionalized nanocomposites employed as carriers of a photoactive platinum diimine complex have been fabricated and characterized. Upon irradiation, the IC₅₀ value of photosensitizer-loaded triphenylphosphonium-functionalized nanocomposites was found to be 17.4 or 14.4 times lower than that of the photosensitizer studied alone against HCT116 cells or A549 cells, respectively. The results suggested that the triphenylphosphonium- functionalized nanocomposites as drug delivery vehicles could significantly enhance the photodynamic efficacy of the photosensitizer.

Kinetic and thermodynamic studies of novel acid phosphates extracted from Cichorium intybus seedlings

Herein for the first time a novel acid phosphatase from the seedlings of Cichorium intybus was purified to homogeneity by using various chromatographic techniques (salt precipitation, ion exchange, size exclusion and affinity chromatography) and thermodynamically characterized. The molecular mass of purified enzyme (66 kDa) was determined by SDS-PAGE under denaturing and non-denaturing conditions and by gel-filtration confirmed as dimer of molecular mass 130 kDa. The Michaelis-Menten (Km) constant for -p-NPP (0.3 mM) and (7.6 μmol/min/mg) Vmax. The enzyme was competitively inhibited by phosphate, molybdate and vanadate. Phenyl phosphate, ɑ and β-glycero-phosphate and-p-NPP were found to be good substrate. When temperature increased from (55 °C to 75 °C), the deactivation rate constant (kd) was increased (0.1 to 4.6 min-1) and half- life was decreased from 630 min to 15 min. Various thermal denaturation parameters; change in enthalpy (ΔH°), change in entropy (ΔS°) and change in free energy (ΔG°) were found 121.93 KJ·mol-1, 72.45 KJ·mol-1 and 98.08 KJ·mol-1 respectively, confirming that acid phosphatase undergoes a significant process of unfolding during deactivation. The biochemical properties of acid phosphatase from C. intybus on the behalf of biological activity and its relationship to pH variations, thermal deactivation and kinetics parameters provide an insight into its novel features.

Tyrosine kinase inhibitors and their unique therapeutic potentialities to combat cancer

Cancer is one of the leading causes of death with a mortality rate of 12%. Although significant progress has been achieved in cancer research, the effective treatment of cancer remains the greatest global challenge in medicine. Dysregulation of tyrosine kinases (TK) is one of the characteristics of several types of cancers. Thus, drugs that target and inhibit these enzymes, known as TK inhibitors (TKIs), are considered vital chemotherapeutics to combat various types of cancer. The oral bioavailability of available TKIs and their targeted therapy are their potential benefits. Based on these characteristics, most TKIs are included in first/second-line therapy for the treatment of different cancers. This review aims to shed light on orally-active TKIs (natural and synthetic molecules) and their promising implication in the therapy of numerous types of tumors along with their mechanisms of action. Further, recent progress in the development of synthetic and isolation of natural TKIs is reviewed. A significant growth in research regarding the development of new-generation TKIs is made with time (23 FDA-approved TKIs from 2018) due to their better therapeutic response. Oral bioavailability should be considered as an important parameter while developing of new-generation TKIs; however, drug delivery systems can also be used to address issue of poor bioavailability to a certain extent. Moreover, clinical trials should be designed in consideration of the development of resistance and tumor heterogeneity.

Enzymatic degradation of ginkgolic acids by laccase immobilized on core/shell Fe3O4/nylon composite nanoparticles using novel coaxial electrospraying process

Enzyme immobilization can increase enzyme reusability to reduce cost of industrial production. Ginkgo biloba leaf extract is commonly used for medical purposes, but it contains ginkgolic acid, which has negative effects on human health. Here, we report a novel approach to solve the problem by degrading the ginkgolic acid with immobilized-laccase, where core/shell composite nanoparticles prepared by coaxial electrospraying might be first applied to enzyme immobilization. The core/shell Fe₃O₄/nylon 6,6 composite nanoparticles (FNCNs) were prepared using one-step coaxial electrospraying and can be simply recovered by magnetic force. The glutaraldehyde-treated FNCNs (FNGCNs) were used to immobilize laccase. As a result, thermal stability of the free laccase was significantly improved in the range of 60-90 °C after immobilization. The laccase-immobilized FNGCNs (L-FNGCNs) were applied to degrade the ginkgolic acids, and the rate constants (k) and times (τ₅₀) were ~0.02 min^-1 and lower than 39 min, respectively, showing good catalytic performance. Furthermore, the L-FNGCNs exhibited a relative activity higher than 0.5 after being stored for 21 days or reused for 5 cycles, showing good storage stability and reusability. Therefore, the FNGCNs carrier was a promising enzyme immobilization system and its further development and applications were of interest.

Tyrosinase-mediated melanogenesis in melanoma cells: Array comparative genome hybridization integrating proteomics and bioinformatics studies

We investigated the tyrosinase-associated melanogenesis in melanoma cells by using OMICS techniques. We characterized the chromosome copy numbers, including Chr 11q21 where the tyrosinase gene is located, from several melanoma cell lines (TXM13, G361, and SK-MEL-28) by using array CGH. We revealed that 11q21 is stable in TXM13 cells, which is directly related to a spontaneous high melanin pigment production. Meanwhile, significant loss of copy number of 11q21 was found in G361 and SK-MEL-28. We further profiled the proteome of TXM13 cells by LC-ESI-MSMS and detected more than 900 proteins, then predicted 11 hub proteins (YWHAZ; HSP90AA1; HSPA5; HSPA1L; HSPA9; HSP90B1; HSPA1A; HSPA8; FKSG30; ACTB; DKFZp686DQ972) by using an interactomic algorithm. YWHAZ (25% interaction in the network) is thought to be a most important protein as a linking factor between tyrosinase-triggered melanogenesis and melanoma growth. Bioinformatic tools were further applied for revealing various physiologic mechanisms and functional classification. The results revealed clues for the spontaneous pigmentation capability of TXM13 cells, contrary to G361 and SK-MEL-28 cells, which commonly have depigmentation properties during subculture. Our study comparatively conducted the genome-wide screening and proteomic profiling integrated interactomics prediction for TXM13 cells and suggests new insights for studying both melanogenesis and melanoma.

Utilization of the common functional groups in bioactive molecules: Exploring dual inhibitory potential and computational analysis of keto esters against α-glucosidase and carbonic anhydrase-II enzymes

Diabetes mellitus, a progressive chronic disease, characterized by the abnormal carbohydrate metabolism is associated with severe health complications including long term dysfunction or failure of several organs, cardiovascular and micro-angiopathic problems (neuropathy, nephropathy, retinopathy). Despite the existence of diverse chemical structural libraries of α-glucosidase inhibitors, the limited diabetic treatment due to the adverse side effects such as abdominal distention, flatulence, diarrhoea, and liver damage associated with these inhibitors encourage the medicinal research community to design and develop new and potent inhibitors of α-glucosidase with better pharmacokinetic properties. In this perspective, we demonstrate the successful integration of common functional groups (ketone & ester) in one combined pharmacophore which is favorable for the formation of hydrogen bonds and other weaker interactions with the target proteins. These keto ester derivatives were screened for their α-glucosidase inhibition potential and the in vitro results revealed compound 3c as the highly active inhibitor with an IC₅₀ value of 12.4 ± 0.16 μM compared to acarbose (IC₅₀ = 942 ± 0.74 μM). This inhibition potency was ~76-fold higher than acarbose. Other potent compounds were 3f (IC₅₀ = 28.0 ± 0.28 μM), 3h (IC₅₀ = 33.9 ± 0.09 μM), 3g (IC₅₀ = 34.1 ± 0.04 μM), and 3d (IC₅₀ = 76.5 ± 2.0 μM). In addition, the emerging use of carbonic anhydrase inhibitors for the treatment of diabetic retinopathy (a leading cause of vision loss) prompted us to screen the keto ester derivatives for the inhibition of carbonic anhydrase-II. Compound 3b was found significantly active against carbonic anhydrase-II with an IC₅₀ of 16.5 ± 0.92 μM (acetazolamide; IC₅₀ = 18.2 ± 1.23 μM). Compound 3a also exhibited comparable potency with an IC₅₀ value of 18.9 ± 1.08 μM. Several structure-activity relationship analyses depicted the influence of the substitution pattern on both the aromatic rings. Molecular docking analysis revealed the formation of several H-bonding interactions through the ester carbonyl and the nitro oxygens of 3c with the side chains of His348, Arg212 and His279 in the active pocket of α-glucosidase whereas 3b interacted with His95, -OH of Thr197, Thr198 and WAT462 in the active site of carbonic anhydrase-II. Furthermore, evaluation of ADME properties suggests the safer pharmacological profile of the tested derivatives.

An upgraded and universal strategy to reinforce chitosan/polyvinylpyrrolidone film by incorporating active silica nanorods derived from natural palygorskite

Active silica nanorod (OPal) was prepared from natural palygorskite (RPal) using an updated acid leaching route, and then the effect of RPal and OPal as nano-filler on the network structure, mechanical, thermal and anti-aging properties of chitosan/polyvinylpyrrolidone (CS/PVP) films was studied comparatively. It was revealed that OPal had a better dispersibility than RPal in CS/PVP substrate, and its incorporation improved the mechanical properties and thermal stability of the films significantly. The optimal composite film containing OPal shows the maximum tensile strength of 27.53 MPa (only 14.87 MPa and 22.47 MPa for CS/PVP and CS/PVP/RPal films, respectively), resulting from the more uniform dispersion of OPal in polymer substrate and its stronger interaction with 3D polymer network. By a controllable acid-leaching process, the metal ions in octahedral sheets of RPal were dissolved out continuously, which is favorable to alleviate the adverse effects of variable metal ions on the film under UV light irradiation, and thus improve the aging-resistant ability of films. This study provides new ideas for improving the reinforcing ability of natural clay minerals towards biopolymer-based material, finds a new way to resolve the aging problem of polymer composites caused by incorporation of natural clay minerals.