Preparation and antibacterial properties of ε-polylysine-containing gelatin/chitosan nanofiber films

Fibrous membranes of poly(ethylene oxide)/Sesbania gum oxide/ε-poly(lysine): An influence on its structure

Hydrogen peroxide (H2O2) was used to modify a natural polymer, sesbania gum (SG), to prepare oxidized sesbania gum (OSG) with the aim of investigating the physicochemical properties, antimicrobial activity of polyethylene oxide (PEO), OSG, and ε-poly(lysine) (ε-PL) composite fibre membranes and their applications in fresh-cut mango preservation. The PEO/OSG/ε-PL composite fibre membranes were successfully prepared via solution blow spinning (SBS) technology. The results of a series of characterizations revealed that ε-PL was successfully loaded into the fibrous membranes, exhibited good biocompatibility, and ε-PL was better encapsulated, with the membranes. The hydrophilicity, thermal stability, mechanical properties, and flexibility of the fibrous membranes were improved, and the water vapour transmission rate was reduced with the ε-PL content. In vitro bacterial inhibition experiments revealed that PEO/OSG/ε-PL fibre membranes with more than 2 wt% added ε-PL effectively inhibited the growth of E. coli and S. aureus. Fruit preservation experiments showed that PEO/OSG/ε-PL fibre membrane could reduce weight loss, inhibit microbial growth, and delay quality deterioration of fresh-cut mango. In addition, the PEO/OSG/ε-PL fibre membrane showed high biodegradability. These results show that the PEO/OSG/ε-PL composite fibre membrane prepared by SBS has application potential as an active packaging material.

Tough, antibacterial, antioxidant, antifogging and washable chitosan/nanocellulose-based edible coatings for grape preservation

This study focused on extracting nanocellulose from food processing waste to create a multi-functional edible coating for preserving grapes. Nanocellulose, in the form of short rods with diameters ranging from 30 to 130 nm, was extracted from soy hulls. Edible coatings were then prepared through an ion cross-linking method. Results revealed that the film surfaces and cross-sections were smooth, flat and pore-free, with monomers cross-linked through hydrogen bonding, ester bonds and electrostatic interactions. Further, the incorporation of soy-hull nanocellulose (2 g) effectively improved the mechanical strength (elongation = 281.03 % and tensile strength = 114.88 MPa), barrier properties and antifogging and antibacterial properties (95.55 %) of SCT composite films. Moreover, compared with the control, the SCT-3 coating can extend the shelf life of grapes to 10 d at 25 °C. This study offers a new perspective on the high-value use of agricultural by-products and development of edible films.

Preparation, antioxidant, antibacterial, and in vivo evaluation of pomegranate flower extract nanofibers based on thiolated chitosan and thiolated gelatin for treating aphthous stomatitis

Recurrent aphthous stomatitis (RAS) is a common condition that manifests as ulcerative lesions in the oral mucosa. In this study, bilayer, mucoadhesive nanofibers loaded with pomegranate flower extract (PFE) were prepared using thiolated gelatin (TGel) and thiolated chitosan (TCS) as the active layer and drug-free polycaprolactone (PCL) as the backing layer. Gelatin (Gel) and chitosan (CS) were successfully thiolated (proven by Ellman's assay, solubility, 1H NMR, FTIR, Raman spectroscopy, and XRD) and electrospun into active nanofibrous layers with a diameter of 356.9 nm. The in vitro release assay showed extended release of PFE, reaching about 57 % drug release in 48 h, fitted to the Korsmeyer-Peppas kinetics. FTIR, Raman spectroscopy, and XRD also showed the characteristic peaks of the nanofibers and their components. The nanofibers also exhibited significant hydrophilicity (contact angle of 47-49°), mucoadhesion (432.7 Pa), antioxidant capabilities (93.3 ± 0.2 %), and antibacterial effects against Staphylococcus aureus and Pseudomonas aeruginosa. Furthermore, PFE-loaded thiolated nanofibers significantly accelerated wound healing and epithelial tissue regeneration in vivo, reducing the ulcer area from 187 ± 19 mm on the 1st day to 68 ± 6 on the 7th day. Overall, bilayer PFE-loaded nanofibers based on TCS and TGel showed promising potential for treating RAS.

A novel gelatin/chitosan-based "sandwich" antibacterial nanofiber film loaded with perillaldehyde for the preservation of chilled chicken

Quality deterioration caused by microorganisms is a crucial problem in food industry. Herein, to enhance the antibacterial effect and extend the storage life of chilled chicken, a gelatin/chitosan (GC)-based "sandwich" nanofiber film was prepared by sandwiching GP2 (gelatin nanofibers loaded with 2 % (v/v) perillaldehyde) between two layers of GC nanofibers. The diameter of GP nanofibers was positively correlated with perillaldehyde concentration. However, the thermal stability of GP nanofibers was negatively correlated. The thermal degradation temperature (Tm) of GP2 was the lowest. Fortunately, GC nanofibers improved Tm of GP2 from 98.91 °C to 111.60 °C. Besides, FTIR absorption bands at 1636 and 1442 cm-1 indicated that perillaldehyde was successfully embedded. Moreover, poor water resistance of gelatin nanofibers was also improved. Specifically, benefiting from the synergy between perillaldehyde and chitosan, the shelf-life of chilled chicken was efficiently prolonged (over 10 days). Thus, this "sandwich" nanofiber film shows promise for food packaging.

A high-strength collagen-based antimicrobial film grafted with ε-polylysine fabrication by riboflavin-mediated ultraviolet irradiation for pork preservation

In this study, a UV-cured collagen-based film (C-P-H film) with high mechanical strength and antimicrobial properties was developed by riboflavin-mediated ultraviolet irradiation of collagen solution containing histidine-modified ε-polylysine. Fourier transform infrared analysis indicated that covalent cross-linking was formed between the collagen molecule and the histidine-grafted ε-polylysine. Compared with the pure collagen film, the C-P-H film containing 5 wt% histidine-modified ε-polylysine showed higher tensile strength (145.98 MPa), higher thermal denaturation temperature (76.5 °C), lower water vapor permeability (5.54 × 10-11 g m-1 s-1 Pa) and excellent antimicrobial activities against Escherichia coli and Staphylococcus aureus. In addition, the wrapping of the C-P-H film effectively inhibited bacterial growth of pork during storage time, successfully prolonging the shelf-life of pork by approximately 4 days compared to that of plastic wrap. These results suggested that collagen-based film grafted with histidine-modified ε-polylysine via riboflavin-mediated ultraviolet irradiation process had a great potential for pork preservation.

Exploring gelation properties and structural features on 3D printability of compound proteins emulsion gels: Emphasizing pH-regulated non-covalent interactions with xanthan gum

Rational regulation of pH and xanthan gum (XG) concentration has the potential to modulate interactions among macromolecules and enhance 3D printability. This study investigated non-covalent interactions between XG and other components within compound proteins emulsion gel systems across varying pH values (4.0-8.0) and XG concentrations (0-1 wt%) and systematically explored impacts of gelation properties and structural features on 3D printability. The results of rheological and structural features indicated that pH-regulated non-covalent interactions were crucial for maintaining structural stability of emulsion gels with the addition of XG. The 3D printability of emulsion gels would be significantly improved through moderate depletion flocculation produced when XG concentration was 0.75 wt% at the pH 6.0. Mechanical properties like viscosity exhibited a strongly negative correlation with 3D printability, whereas structural stability showed a significantly positive correlation. Overall, this study provided theoretical insights for the development of emulsion gels for 3D printing by regulating non-covalent interactions.

Water-soluble polysaccharides extracted from Enteromorpha prolifera/PVA composite film functionalized as ε-polylysine with improved mechanical and antibacterial properties

The issue of environmental protection has received sustained and widespread attention. In order to reduce environmental pollution related to traditional plastics, it is an incessant demand to design novel environment-friendly food packaging materials with excellent performance. Sulfated polysaccharide extracted from the "green tide" marine pollution Enteromorpha prolifera (SPE) has been innovatively transformed into a film-forming material for better utilization. The insufficient mechanical properties and limited functionalities, however, hinder its wide application. In this study, polyvinyl alcohol (PVA) was blended to enhance its mechanical properties and ε-polylysine (ε-PL) was incorporated to endow it with antimicrobial performance. A novel and biodegradable film composed of SPE, PVA, and ε-PL was fabricated by casting method. We further determined the physicochemical properties of composited films. Mechanical performance test revealed the tensile strength of SPE-PVA-PL films increased from 5.56 MPa to 6.65 MPa and the E% increased from 128.8 % to 246.9 % compared with that of SPE-PVA films. Antimicrobial tests showed the excellent antibacterial activity of SPE-PVA-PL films against representative microbial species, Staphylococcus aureus and Escherichia coli. The results of this study suggested that the SPE-based composite film has the potential to be used as a potential food packaging and wound dressing materials.

Preparation, characterization and properties of chitosan-coated Epsilon-poly-lysine nanoliposomes in apple juice

Epsilon-poly-lysine (EPL) is widely used in food preservatives. However, EPL can react with components in food substrates, resulting in the formation of precipitates that reduce its antimicrobial properties. Nanoencapsulation is a promising technique and represents a novel approach to enhance EPL activity. In this study, EPL nanoliposomes (EPLLP) were prepared by the thin film hydration method, and chitosan-coated nanoliposomes (CS-EPLLP) were developed by modifying EPLLP with 0.5 mg/mL chitosan. The obtained CS-EPLLP exhibited a spherical morphology with a particle size range of 85.27-89.77 nm, a polydispersity index (PDI) of 0.293-0.301, and an encapsulation efficiency of 83.01 ± 4.00 %. After 30 days of storage, no significant difference in particle size was observed and the PDI was <0.30. The release rate of EPLLP was up to 40 % in 1 h, while that of CS-EPLLP was <20 %. The physical and thermal stability of EPLLP could be effectively improved by chitosan. Moreover, CS-EPLLP could effectively eradicate A. acidocaldarius and A. acidoterrestris in apple juice at concentrations of 2.5 and 0.625 mg/L, respectively. The cytotoxicity test showed that CS-EPLLP exhibited excellent biocompatibility. Therefore, this study has developed a novel nanoliposome material that provides new insights into the control of bacterial contamination in fruit juices.

Fabrication and characterization of carvacrol encapsulated gelatin/chitosan composite nanofiber membrane as active packaging material

In this study, carvacrol was effectively encapsulated in gelatin/chitosan composite nanofiber membrane using the electrospinning method with the help of the cationic surfactant cetyltrimethylammonium bromide (CTAB). The effects of CTAB (0.0%, 1.0%, w/w) and bioactive carvacrol (0.0%, 1.0%, 3.0%, 5.0%, 7.0%, 10.0%, w/w) on the structural, physicomechanical, antibacterial, and antioxidant characteristics of the nanofiber membranes were investigated. The results demonstrated that the antibacterial and antioxidant characteristics of the gelatin/chitosan composite nanofiber membrane (GC) and GC-CAR membrane (with the addition of 1.0% carvacrol) were unsatisfactory. As carvacrol and CTAB were both added, the elongation at break, antibacterial, and antioxidant properties of the nanofiber membranes significantly improved (p < 0.05), while the water vapor permeability (WVP) significantly decreased (p < 0.05). When the added amount of carvacrol was 5.0% (w/w), the nanofiber membrane (GC-CAR5-CTAB) exhibited the best antioxidant and antibacterial performance. Finally, the GC-CAR5-CTAB membrane was applied to the preservation of strawberries and Erjingtiao chilies, and their shelf life was effectively extended. The above results indicate that the nanofiber membrane prepared in this study has great potential for application in food-active packaging.

Biocompatible film based on protein/polysaccharides combination for food packaging applications: A comprehensive review

Protein and polysaccharides are the mostly used biopolymers for developing packaging film and their combination-based composite produced better quality film compared to their single counterpart. The combination of protein and polysaccharides are superior owing to the better physical properties like water resistance, mechanical and barrier properties of the film. The protein/polysaccharide-based composite film showed promising result in active and smart food packaging regime. This work discussed the recent advances on the different types of protein/polysaccharide combinations used for making bio-based sustainable packaging film formulation and further utilized in food packaging applications. The fabrication and properties of various protein/polysaccharide combination are comprehensively discussed. This review also presents the use of the multifunctional composite film in meat, fish, fruits, vegetables, milk products, and bakery products, etc. Developing composite is a promising approach to improve physical properties and practical applicability of packaging film. The low water resistance properties, mechanical performance, and barrier properties limit the real-time use of biopolymer-based packaging film. The combination of protein/polysaccharide can be one of the promising solutions to the biopolymer-based packaging and thus recently many works has been published which is suitable to preserve the shelf life of food as well trace the food spoilage during food storage.

Preparation, characterization, antimicrobial evaluation, and grape preservation applications of polyvinyl alcohol/gelatin composite films containing zinc oxide@quaternized chitosan nanoparticles

This study employed a precipitation method to synthesize zinc oxide@quaternised chitosan nanoparticles (ZnO@QAC NPs) containing different concentrations of zinc oxide, namely ZnO@QAC-2, ZnO@QAC-4, and ZnO@QAC-6. Subsequently, these nanoparticles were incorporated into matrices consisting of gelatine (Gn) and polyvinyl alcohol (PVA) separately, which were prepared by casting to form a biodegradable film. We assessed the physicochemical properties of ZnO@QAC NPs and physicochemical characteristics, antioxidant properties, antimicrobial activity and grape preservation efficacy of the film. Compared to the control group, the films showed a reduction in water vapor permeability by >9.38 %, an increase in tensile strength by over 51.95 %, over 70 % scavenging of ABTS free radicals, and good biocompatibility. Additionally, the antimicrobial activity of the films containing ZnO@QAC-6 increased by 37.6 %. In the grape preservation experiment, the weight loss of grapes wrapped in ZnO@QAC-2 film was reduced by 40.13 % on day 15 compared to unwrapped grapes. These results demonstrate that ZnO@QAC/PVA/Gn films have considerable potential for food packaging applications.

Development of Innovative Composite Nanofiber: Enhancing Polyamide-6 with ε-Poly-L-Lysine for Medical and Protective Textiles

Polyamide-6 (PA) is a popular textile polymer having desirable mechanical and thermal properties, chemical stability, and biocompatibility. However, PA nanofibers are prone to bacterial growth and user discomfort. ε-Poly-L-lysine (PL) is non-toxic, antimicrobial, and hydrophilic but lacks spinnability due to its low molecular weight. Given its similar backbone structure to PA, with an additional amino side chain, PL was integrated with PA to develop multifunctional nanofibers. This study explores a simple, scalable method by which to obtain PL nanofibers by utilizing the structurally similar PA as the base. The goal was to enhance the functionality of PA by addressing its drawbacks. The study demonstrates spinnability of varying concentrations of PL with base PA while exploring compositions with higher PL concentrations than previously reported. Electrospinning parameters were studied to optimize the nanofiber properties. The effects of PL addition on morphology, hydrophilicity, thermal stability, mechanical performance, and long-term antimicrobial activity of nanofibers were evaluated. The maximum spinnable concentration of PL in PA-based nanofibers resulted in super hydrophilicity (0° static water contact angle within 10 s), increased tensile strength (1.02 MPa from 0.36 MPa of control), and efficient antimicrobial properties with long-term stability. These enhanced characteristics hold promise for the composite nanofiber's application in medical and protective textiles.

Biopolymer-based packaging films/edible coatings functionalized with ε-polylysine: New options for food preservation

In light of the commendable advantages inherent in natural polymers such as biocompatibility, biodegradability, and cost-effectiveness, researchers are actively engaged in the development of biopolymer-based biodegradable food packaging films (BFPF). However, a notable limitation is that most biopolymers lack intrinsic antimicrobial activity, thereby restricting their efficacy in food preservation. To address this challenge, various active substances with antibacterial properties have been explored as additives to BFPF. Among these, ε-polylysine has garnered significant attention in BFPF applications owing to its outstanding antibacterial properties. This study provides a brief overview of the synthesis method and chemical properties of ε-polylysine, and comprehensively examines its impact as an additive on the properties of BFPF derived from diverse biopolymers, including polysaccharides, proteins, aliphatic polyesters, etc. Furthermore, the practical applications of various BFPF functionalized with ε-polylysine in different food preservation scenarios are summarized. The findings underscore that ε-polylysine, functioning as an antibacterial agent, not only directly enhances the antimicrobial activity of BFPF but also serves as a cross-linking agent, interacting with biopolymer molecules to influence the physical and mechanical properties of BFPF, thereby enhancing their efficacy in food preservation.

Fabrication and characterization of a multi-functional GBR membrane of gelatin-chitosan for osteogenesis and angiogenesis

Guided bone regeneration (GBR) membranes are widely used to treat bone defects. In this study, sequential electrospinning and electrospraying techniques were used to prepare a dual-layer GBR membrane composed of gelatin (Gel) and chitosan (CS) containing simvastatin (Sim)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (Sim@PLGA/Gel-CS). As a GBR membrane, Sim@PLGA/Gel-CS could act as a barrier to prevent soft tissue from occupying regions of bone tissue. Furthermore, compared with traditional GBR membranes, Sim@PLGA/Gel-CS played an active role on stimulating osteogenesis and angiogenesis. Determination of the physical, chemical, and biological properties of Sim@PLGA/Gel-CS membranes revealed uniform sizes of the nanofibers and microspheres and appropriate morphologies. Fourier-transform infrared spectroscopy was used to characterize the interactions between Sim@PLGA/Gel-CS molecules and the increase in the number of amide groups in crosslinked membranes. The thermal stability and tensile strength of the membranes increased after N-(3-dimethylaminopropyl)-N9- ethylcarbodiimide/N-hydroxysuccinimide crosslinking. The increased fiber density of the barrier layer decreased fibroblast migration compared with that in the osteogenic layer. Osteogenic function was indicated by the increased alkaline phosphatase activity, calcium deposition, and neovascularization. In conclusion, the multifunctional effects of Sim@PLGA/Gel-CS on the barrier and bone microenvironment were achieved via its dual-layer structure and simvastatin coating. Sim@PLGA/Gel-CS has potential applications in bone tissue regeneration.

Food applications of bioactive biomaterials based on gelatin and chitosan

Food packaging must guarantee the products' quality during the different operations including packing and maintenance throughout transportation and storage until to consumption. Thus, it should satisfy, both, food freshness and quality preservation and consumers health safety. Natural bio-sourced polymers have been explored as safe edible materials for several packaging applications, being interestingly carrier of bioactive substances, once added to improve films' properties. Gelatin and chitosan are among the most studied biomaterials for the preparation of edible packaging films due to their excellent characteristics including biodegradability, compatibility and film-forming property. These polymers could be used alone or in combination with other polymers to produce composite films with the desired physicochemical and mechanical properties. When incorporated with bioactive substances (natural extracts, polyphenolic compounds, essential oils), chitosan/gelatin-based films acquired various biological properties, including antioxidant and antimicrobial activities. The emerging bioactive composite films with excellent physical attributes represent excellent packaging alternative to preserve different types of foodstuffs (fruits, meat, fish, dairy products, …) and have shown great achievements. This chapter provides the main techniques used to prepare gelatin- and chitosan- based films, showing some examples of bioactive compounds incorporated into the films' matrix. Also, it illustrates the outstanding advantages given by these biomaterials for food preservation, when used as coating and wrapping agents.

Strong, tough, high-release, and antibacterial nanocellulose hydrogel for refrigerated chicken preservation

Enormous amounts of food resources are annually wasted because of microbial contamination, highlighting the critical role of effective food packaging in preventing such losses. However, traditional food packaging faces several limitations, such as low mechanical strength, poor fatigue resistance, and low water retention. In this study, we aimed to prepare nanocellulose hydrogels with enhanced stretchability, fatigue resistance, high water retention, and antibacterial properties using soy hull nanocellulose (SHNC), polyvinyl alcohol (PVA), sodium alginate (SA), and tannic acid (TA) as raw materials. These hydrogels were applied in food packaging to extend the shelf life of refrigerated chicken. The structure and properties (e.g., mechanical, antibacterial, and barrier properties) of these hydrogels were characterized using different techniques. Fourier-transform infrared spectroscopy revealed the presence of hydrogen and ester bonds in the hydrogels, whereas scanning electron microscopy revealed the three-dimensional network structure of the hydrogels. Mechanical testing demonstrated that the SHNC/PVA/SA/TA-2 hydrogel exhibited excellent tensile properties (elongation = 160 %), viscoelasticity (storage modulus of 1000 Pa), and mechanical strength (compressive strength = 10 kPa; tensile strength = 0.35 MPa). Moreover, under weak acidic and alkaline conditions, the ester bonds of the hydrogel broke down with an increase in pH, improving its swelling and release properties. The SHNC/PVA/SA/TA-2 hydrogel displayed an equilibrium swelling ratio exceeding 300 %, with a release rate of >80 % for the bioactive substance TA. Notably, antibacterial testing showed that the SHNC/PVA/SA/TA-2 hydrogel effectively deactivated Staphylococcus aureus and Escherichia coli, prolonging the shelf life of refrigerated chicken to 10 d. Therefore, the SHNC/PVA/SA/TA hydrogels can be used in food packaging to extend the shelf life of refrigerated meat products. Their cost-effectiveness and simple preparation make them suitable for various applications in the food industry.

Preparation and characterization of zein/gelatin electrospun film loaded with ε-polylysine and gallic acid as tuna packaging system

BACKGROUND

Composite nanofiber films loaded with ε-polylysine (PL) and gallic acid (GA) were prepared using a zein/gelatin (ZG) electrospinning method to develop effective active packaging films for tuna preservation. The morphology, structure, thermal stability, hydrophobicity, antibacterial, and antioxidant properties of the films, and their application for tuna during a period of storage of 4 °C were investigated.

RESULTS

PL reduced the average diameter of ZG fibers, whereas GA increased it. The PL/GA/ZG film possessed a well distributed fiber morphology with an average diameter of 810 ± 150 nm. Fourier-transform infrared spectroscopy and X-ray diffraction results showed the physical loading of PL and GA in ZG film with the main chemical bonds and crystal structure unchanged. The addition of both PL and GA reduced hydrophobicity of the ZG film while the PL/GA/ZG film was still hydrophobic. GA enhanced its thermal stability and contributed to its antioxidant activity. PL and GA synergetically enhanced the antibacterial activity of ZG film against Shewanella putrefaciens. PL combined with GA is more suitable for modifying ZG film than GA alone. The PL/GA/ZG film effectively inhibited total viable counts, total volatile base nitrogen, fat oxidation, and texture deterioration of tuna fillets at 4 °C storage, and could extend the shelf life by 3 days.

CONCLUSIONS

The PL/GA/ZG nanofiber film demonstrated promising potential for application in the preservation of aquatic products as a new antibacterial and antioxidant food packaging. © 2023 Society of Chemical Industry.

Ag Nanoparticle Incorporated Guar Gum-Sodium Alginate-I-Carrageenan Tribiopolymer Blended Cloth Waste Lint Extracted Cellulose Nanocrystal Antimicrobial Composite Film

A biopolymer-based formulation for robust and active food packaging material was developed. This material consisted of a blend of three biopolymers (guar gum-sodium alginate-i-carrageenan) reinforced by cellulose nanocrystals (CNC) alongside the integration of silver nanoparticles (AgNPs) with varying sizes. The CNC utilized in this process was derived from cloth waste lint (CWL) generated from a household cloth dryer machine. This CNC synthesis underwent a series of solvent treatments to yield the CNC used in the composite. CNC and AgNPs were incorporated into the tribiopolymeric blend matrix to construct a nanocomposite film that showed excellent tensile strength (∼90 MPa). The nanocomposite film also exhibited antimicrobial activity against Escherichia coli ATCC 25922 and Bacillus cereus MTCC 1272. In this report, it was demonstrated that the zone of inhibition against E. coli and B. cereus depends on the variation of size and amount of AgNPs inside the polymeric matrix. The practical applicability of such a film was also demonstrated by applying it to sliced bread and the enhancement of the shelf life of the raped bread was compared with a control. Thus, the guar gum-sodium alginate-i-carrageenan tribiopolymer blend with a cloth waste lint extracted cellulose nanocrystal composite film is antimicrobial, hence, an excellent candidate as an active packaging film.

Design and preparation of novel antioxidant and antibacterial films containing procyanidins and phycocyanin for food packaging

The purpose of this study was to design a novel antioxidant and antibacterial film for food packaging using food-grade raw materials. The films were designed and fabricated based on carboxymethyl chitosan and pectin incorporated with procyanidins (PCs) and phycocyanin (Phy) by the tape casting method. The effects of different proportions of PCs and Phy on the properties and functions of the prepared films were studied. The results showed that the thickness of films could range from 55 to 70 μm, with dense network structure and uniform distribution of elements. Compared with C-Film group, the film loaded with PCs and Phy had lower water solubility and swelling rate, and higher tensile strength and elongation at break. FITR and XRD spectra revealed the molecular interaction mechanism among carboxymethyl chitosan, pectin, PCs and Phy, which could effectively endow the films with ultraviolet barrier properties. Moreover, the addition of PCs and Phy could effectively improve the antioxidant capacity and antibacterial effect of films, for example, the free radical scavenging abilities of most films were above 80% when the concentration of PCs was 40 μg mL-1. In view of these functional properties, the prepared film containing PCs and Phy have been successfully used in food packaging, which was proved by the preservation experiment of grapes. This study can provide theoretical and technical guidance for the preparation of biodegradable antibacterial films, and their application in the food packaging field.

Research on topological effect of natural small molecule and high-performance antibacterial air filtration application by electrospinning

The application of natural small molecule (NSM) in electrospun fibers is the key to achieving powerful functionality and sustainable development. However, the lack of understanding regarding the mechanism for loading NSM hinders the advancement of high-performance functional fibers. This work clarified the loading mechanism of NSM in polymer solution by comparing the different behaviors of curcumin (Cur), phloretin (PL), and tea polyphenols (TP) blended ethyl cellulose (EC) solutions. We found that TP may lead to the folding of polymer chains due to its strongest hydrogen bond, which in turn promoted the dispersion of TP along the polymer chain. Therefore, TP could achieve good electrospinnability at the highest loading capacity (16 times the Cur and 4 times the PL). Finally, chitosan was introduced into EC/TP to prepare tree-like nanofibers, achieving high-performance antibacterial air filtration. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.991 %, 85.5 Pa, and 0.1089 Pa-1, respectively. The bacteriostatic rates against Escherichia coli and Staphylococcus aureus were all 99.99 %. This work will promote the application of NSM and the developments of multifunctional electrospun fibers and high-performance air filters.

Physicochemical, antibacterial and food preservation properties of active packaging films based on chitosan/ε-polylysine-grafted bacterial cellulose

To address the environmental and food contamination issues caused by plastics and microorganisms, antimicrobial films using natural polymers has attracted enormous attention. In this work, we proposed a green, convenient and fast approach to prepare antimicrobial films from chitosan (CS), bacterial cellulose (BC) and ε-polylysine (ε-PL). The effects of different concentrations of ε-PL (0 %, 0.25 %, 0.5 %, 0.75 %, 1 %, w/v) on the physicochemical properties and antibacterial activity of composite films (CS-DABC-x%PL) were systematically investigated. Furthermore, a comprehensive comparison with purely physically mixed CS-BC-x%PL films provides a deeper understanding of the subject matter. Characterization tests of the films were conducted using scanning electron microscope (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The results suggested that the incorporation of 0.5 % ε-PL reduced the water solubility of the composite film by 19.82 %, along with improved the tensile strength and thermal stability by 37.31 % and 28.54 %. As ε-PL concentration increased to 1 %, the antibacterial performance of the films gradually enhanced. Additionally, the CS-DABC-0.5%PL film demonstrated effectiveness in delaying the deterioration of tilapia. These findings imply that this novel green packaging material holds significant potential in food preservation due to its promising antibacterial properties.

A novel high water-soluble antibacterial films-based guar gum incorporated with Aloe vera gel and ε-polylysine

The high water-soluble films are commonly used in food coating and food encapsulation. In this study, the effect of Aloe vera gel (AV) and ε-polylysine (ε-PL) on the comprehensive properties of films based on guar gum (GG) were investigated. When GG to AV was 8:2, the GG:AV:ε-PL composite films (water solubility = 68.50%) had an 82.42% higher water solubility than pure guar gum (PGG) films (water solubility = 37.55%). Compared with PGG films, the composite films more transparent, better thermal stability and elongation at break. X-ray diffraction and SEM analysis showed the composite films were amorphous structures and the AV and ε-PL did not change the structure of PGG. FITR analysis confirmed the formation of hydrogen bonds within the composite films. Antibacterial properties showed the composite films had a good antibacterial effect against Escherichia coli and Staphylococcus aureus. Therefore, the composite films can be a new option of high water-soluble antibacterial food packaging materials.

Packaging films based on biopolymers from seafood processing wastes: Preparation, properties, and their applications for shelf-life extension of seafoods-A comprehensive review

Biopolymers derived from seafood processing byproducts are used to prepare active and biodegradable films as the packaging of food products. These films possess bioactivities to enhance the shelf life of packed foods by proactively releasing antimicrobial/antioxidative agents into the foods and providing sufficient barrier properties. Seafood processing byproducts are an eminent source of valuable compounds, including biopolymers and bioactive compounds. These biopolymers, including collagen, gelatin, chitosan, and muscle proteins, could be used to prepare robust and sustainable food packaging with some antimicrobial agents or antioxidants, for example, plant extracts rich in polyphenols or essential oils. These active packaging are not only biodegradable but also prevent the deterioration of packed foods caused by spoilage microorganisms as well as chemical deterioration. Seafood discards have a promising benefit for the development of environmentally friendly food packaging systems via the appropriate preparation methods or techniques. Therefore, the green packaging from seafood leftover can be better exploited and replace the synthetic counterpart.

Fabrication of ɛ-Polylysine-Loaded Electrospun Nanofiber Mats from Persian Gum-Poly (Ethylene Oxide) and Evaluation of Their Physicochemical and Antimicrobial Properties

In the present study, electrospun nanofiber mats were fabricated by mixing different ratios (96:4, 95:5, 94:6, 93:7, and 92:8) of Persian gum (PG) and poly (ethylene oxide) (PEO). The SEM micrographs revealed that the nanofibers obtained from 93% PG and 7% PEO were bead-free and uniform. Therefore, it was selected as the optimized ratio of PG:PEO for the development of antimicrobial nanofibers loaded with ɛ-Polylysine (ɛ-PL). All of the spinning solutions showed pseudoplastic behavior and the viscosity decreased by increasing the shear rate. Additionally, the apparent viscosity, G', and G″ of the spinning solutions increased as a function of PEO concentration, and the incorporation of ɛ-PL did not affect these parameters. The electrical conductivity of the solutions decreased when increasing the PEO ratio and with the incorporation of ɛ-PL. The X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectra showed the compatibility of polymers. The antimicrobial activity of nanofibers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was investigated, and the samples loaded with ɛ-PL demonstrated stronger antimicrobial activity against S. aureus.

Development of chitosan/konjac glucomannan/tragacanth gum tri-layer food packaging films incorporated with tannic acid and ε-polylysine based on mussel-inspired strategy

Constructing biodegradable food packaging with good mechanics, gas barrier and antibacterial properties to maintain food quality is still challenge. In this work, mussel-inspired bio-interface emerged as a tool for constructing functional multilayer films. Konjac glucomannan (KGM) and tragacanth gum (TG) with physical entangled network are introduced in the core layer. Cationic polypeptide ε-polylysine (ε-PLL) and chitosan (CS) producing cationic-π interaction with adjacent aromatic residues in tannic acid (TA) are introduced in the two-sided outer layer. The triple-layer film mimics the mussel adhesive bio-interface, where cationic residues in outer layers interact with negatively charged TG in the core layer. Furthermore, a series of physical tests showed excellent performance of triple-layer film with great mechanical properties (tensile strength (TS): 21.4 MPa, elongation at break (EAB): 7.9 %), UV-shielding (almost 0 % UV transmittance), thermal stability, water, and oxygen barrier (oxygen permeability (OP): 1.14 × 10^-3 g/m s Pa and water vapor permeability (WVP): 2.15 g mm/m² day kPa). In addition, the triple-layer film demonstrated advanced degradability, antimicrobial functions, and presented good moisture-proof performance for crackers, which can be potentially applied as dry food packaging.

Nanocomposites of cellulose nanofibers incorporated with carvacrol via stabilizing octenyl succinic anhydride-modified ɛ-polylysine

Food packaging plays an extremely important role in the global food chain, allowing for products to be shipped across long distances without spoiling. However, there is an increased need to both reduce plastic waste caused by traditional single-use plastic packaging and improve the overall functionality of packaging materials to extend shelf-life even further. Herein, we investigate composite mixtures based on cellulose nanofibers and carvacrol via stabilizing octenyl-succinic anhydride-modified epsilon polylysine (MɛPL-CNF) for active food packaging applications. The effects of epsilon polylysine (εPL) concentration and modification with octenyl-succinic anhydride (OSA) and carvacrol are evaluated with respect to composites morphology, mechanical, optical, antioxidant, and antimicrobial properties. We find that both increased εPL concentration and modification with OSA and carvacrol lead to films with increased antioxidant and antimicrobial properties, albeit at the expense of reduced mechanical performance. Importantly, when sprayed onto the surface of sliced apples, MεPL-CNF-mixtures are able to successfully delay/hinder enzymatic browning, suggesting the potential of such materials for a range of active food packaging applications.

Preparation, Properties and Application in Electrospinning of Tremella Polysaccharide-Protein Complex

In this paper, the effects of different proteins (soybean protein isolate, wheat protein hydrolysate, tremella protein) on the activity of tremella polysaccharide under different conditions were studied. The optimal protein-polysaccharide complex was determined by grafting degree and activity screening, and the microstructure and rheological properties were studied. The results showed that when the ratio of soybean protein isolate to tremella polysaccharide was 2:1 and the solution pH was 7, the optimal complex was obtained by heating at 90 °C for 4 h, and its grafting degree and antioxidant activity were the best. Studies have shown that tremella polysaccharide and soybean protein isolate complex (TFP-SPI) solution is pseudoplastic fluids. At the same time, tremella polysaccharide (TFP) and TFP-SPI were used for electrospinning to observe its spinnability. When the ratio of PVA/TFP-SPI/PL was 8:1:1, nanofibers with uniform diameter and good morphology were obtained. This paper provides a theoretical basis for the comprehensive utilization of tremella polysaccharide and its electrospun fiber can be used as active film for food packaging.

A comprehensive approach to chitosan-gelatine edible coating with β-cyclodextrin/lemongrass essential oil inclusion complex - Characterization and food application

Biopolymer-based films present an ideal matrix for the incorporation of active substances such as antimicrobial agents, giving active packaging a framework of green chemistry and a step forward in food packaging technology. The chitosan-gelatine active coating has been prepared using lemongrass oil as an antimicrobial compound applying a different approach. Instead of surfactants, to achieve compatibilization of compounds, β-cyclodextrin was used to encapsulate lemongrass oil. The antimicrobial effect was assessed using the dip-coating method on freshly harvested cherry tomatoes artificially contaminated by Penicillium aurantiogriseum during 20 days of cold storage. According to the evaluation of the antimicrobial effect of coating formulation on cherry tomato samples, which was mathematically assessed by predictive kinetic models and digital imaging, the applied coating formulation was found to be very effective since the development of fungal contamination for active-coated samples was observed for 20 days.

Application of Poultry Gelatin to Enhance the Physicochemical, Mechanical, and Rheological Properties of Fish Gelatin as Alternative Mammalian Gelatin Films for Food Packaging

This study aimed to describe the properties of cold water fish gelatin (FG) blended with poultry gelatin (PG) for a production of a sachet containing olive oil. To find a desirable film, the different ratio of FG-PG-based films were characterized in terms of mechanical properties. As the proportion of PG in PG-FG-based increased, the tensile strength and Young's modulus were increased, and the elongation at break and heat seal strength of the films were decreased. The 50-50 film had favorable characteristics to use as a sachet. The amount of acid index and peroxide of the oil stored in the sachets after 14 days showed that there is a significant difference (p < 0.05) between the films. The barrier properties of the films including the water vapor permeability and oxygen permeability of films were increased from 1.21 to 4.95 × 10^-11 g m^-1 Pa^-1 s^-1 and 48 to 97 cm³ mµ/m² d kPa, respectively. Dark, red, yellow, and opaque films were realized with increasing PG. Fourier transform infrared (FTIR) spectra approved a wide peak of approximately 2500 cm^-1. The rheological analysis indicated that, by adding PG, viscosity, elastic modulus (G') and loss modulus (G'') were increased significantly (p < 0.05) about 9.5, 9.32 and 18 times, respectively. Therefore, an easy modification of FG with PG will make it suitable for oil sachet packaging applications for the food industry.

PVDF/PLA electrospun fiber membrane impregnated with metal nanoparticles for emulsion separation, surface antimicrobial, and antifouling activities

Although many superwetting materials have been designed for the treatment of oil-containing wastewater, separation strategies for oil-in-water systems containing bacteria have rarely been reported. Herein, poly(vinylidene difluoride)- and poly(lactic acid)-blended fibrous membranes loaded with silver and copper oxide nanoparticles were successfully prepared by a two-step method of electrostatic spinning and liquid-phase synthesis. The product membrane showed excellent super-oleophilic properties in air and hydrophobicity under oil. It could separate water-in-oil emulsion systems containing surfactants with an efficiency above 90%. More importantly, the nanoparticle-loaded fibers were characterized by material degradability and slowly released ions. The fibers exhibited excellent antibacterial activities against both gram-positive and -negative bacteria. This work provides a feasible strategy for water-in-oil emulsion separation and bacterial treatment of wastewater.

Sterilising effect of high power pulse microwave on Listeria monocytogenes

In the present work, Listeria monocytogenes was used as the target strain to investigate the sterilising potential and mechanism of high power pulse microwave (HPPM). Results showed that the inactivation was positively correlated with the pulse frequencies and operating times. The count of Listeria monocytogenes was decreased by 5.09 log CFU/mL under 200 Hz for 9 min, which was used as the optimised condition to further explore the sterilisation mechanism. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that the L. monocytogenes cells of untreated group presented intact surfaces, clear boundary, and its intracellular contents distributed uniformly in the cytoplasm. Following treatment, the cell wall surfaces began to deform in small areas, and cell membranes were severely ruptured, thus resulting in the appearance of electron transmission areas. Extracellular protein and nucleic acid contents, represented by OD260 nm and OD280 nm, increased with the increase in operating time significantly. After treatment, SDS-PAGE profiles of whole-cell proteins displayed that the protein bands became lighter or even disappeared. Na+ K+-ATPase activities and intracellular ATP content decreased by 72.97 and 79.09%, respectively. This was consistent with the cell viability of L. monocytogenes observed by confocal laser scanning microscopy. Overall, the sterilisation mechanism of HPPM on L. monocytogenes may be caused by membrane damage, intracellular component leakage, and energy metabolism hindrance.

Polycaprolactone/Gelatin/Hydroxyapatite Electrospun Nanomembrane Materials Incorporated with Different Proportions of Attapulgite Synergistically Promote Bone Formation

Purpose

To enhance the osteoinductive effect of Hydroxyapatite (HA) in bone tissue engineering, this study manufactured polycaprolactone (PCL)/gelatin (GEL)/HA nanofibrous scaffolds incorporated with different ratios of attapulgite (ATP): HA (0:3, 0:0, 1:1, 2:1 and 3:0) by high-voltage electrospinning. The synergistic effect exerted by ATP and HA on bone formation was explored both in vivo and in vitro.

Methods and Results

First, we determined the group composition and crystal structure of the nanosheets by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses. Then, the physical properties of the scaffolds, including the modulus of elasticity, porosity and water absorption were evaluated. Moreover, the surface microstructure of the nanofibrous scaffolds was captured by Scanning electron microscopy (SEM) and Transmission Electron Microscope (TEM). The biocompatibility of the fabricated scaffolds represented by cell counting kit 8 (CCK-8) and phalloidin staining was also assessed. Next, in vitro osteogenesis was evaluated. Real-time PCR, alkaline phosphatase (ALP) staining and Alizarin red S (ARS) staining results showed that the materials incorporated with HA and ATP at a ratio of 2:1 synergistically promoted more osteoblastic differentiation and extracellular mineralization than scaffolds doped with HA and ATP alone. Last, in vivo, Hematoxylin-Eosin staining (HE staining) and Masson staining showed that groups treated with HA and ATP acquired optimal patterns of bone regeneration.

Conclusion

This study clarified for the first time that the combination of HA and ATP orchestrated biomaterial-induced osseointegration, and the synergistic effect was more significant when the ratio of ATP/HA was 2:1. This conclusion also provides new ideas and a scientific basis for the development of functionalized nanomaterials in bone tissue engineering.

Polylactic Acid Film Coated with Electrospun Gelatin/Chitosan Nanofibers Containing Betel Leaf Ethanolic Extract: Properties, Bioactivities, and Use for Shelf-Life Extension of Tilapia Slices

Gelatin/chitosan solutions incorporated with betel leaf ethanolic extract (BLEE) at varying concentrations were electrospun on polylactic acid (PLA) films. Nanofibers with different morphologies, as indicated by scanning electron microscopy (SEM), were formed after solutions of gelatin/chitosan with and without BLEE were electrospun on PLA films at a constant voltage (25 kV) and a feed rate of 0.4 mL/h. Beaded gelatin/chitosan nanofibers (GC/NF) were found, particularly when high concentrations of BLEE were encapsulated. PLA films coated with GC/NF, and with BLEE added, showed antioxidant and antibacterial activities, which were augmented by increasing BLEE concentrations. Lower water vapor permeability and enhanced mechanical properties were achieved for GC/NF-coated PLA film (p < 0.05). Microbial growth and lipid oxidation of Nile tilapia slices packaged in PLA film coated with GC/NF containing 2% BLEE were more retarded than those packaged in low-density polyethylene (LDPE) bags over refrigerated storage of 12 days. Based on microbial limits, the shelf-life was escalated to 9 days, while the control had a shelf-life of 3 days. Therefore, such a novel film/bag could be a promising active packaging for foods.

Polysaccharide-based nanosystems: a review

Polysaccharide-based nanosystem is an umbrella term for many areas within research and technology dealing with polysaccharides that have at least one of their dimensions in the realm of a few hundreds of nanometers. Nanoparticles, nanocrystals, nanofibers, nanofilms, and nanonetworks can be fabricated from many different polysaccharide resources. Abundance in nature, cellulose, starch, chitosan, and pectin of different molecular structures are widely used to fabricate nanosystems for versatile industrial applications. This review presents the dissolution and modification of polysaccharides, which are influenced by their different molecular structures and applications. The dissolution ways include conventional organic solvents, ionic liquids, inorganic strong alkali and acids, enzymes, and hydrothermal treatment. Rheological properties of polysaccharide-based nano slurries are tailored for the purpose functions of the final products, e.g., imparting electrostatic functions of nanofibers to reduce viscosity by using lithium chloride and octenyl succinic acid to increase the hydrophobicity. Nowadays, synergistic effects of polysaccharide blends are increasingly highlighted. In particular, the reinforcing effect of nanoparticles, nanocrystals, nanowhiskers, and nanofibers to hydrogels, aerogels, and scaffolds, and the double network hydrogels of a rigid skeleton and a ductile substance have been developed for many emerging issues.

Physicochemical characteristics of ginger essential oil nanoemulsion encapsulated by zein/NaCas and antimicrobial control on chilled chicken

An efficient antibacterial nanoemulsion was prepared using zein and NaCas to encapsulate ginger essential oil (GEO). Physical, optical, and mechanical properties as well as the antibacterial activities of GEO nanoemulsion were investigated. At 1:1 mass ratio of zein/NaCas, the GEO nanoemulsion possessed the highest solubility, entrapment efficiency and stability. The GEO/zein/NaCas complex was confirmed by ultraviolet and fluorescence spectroscopy. The addition of GEO led to more amorphous structure formation and the secondary structure changes of zein/NaCas improved the solubility and stability of GEO. GEO nanoemulsion inactivated two common foodborne bacteria, namely, Staphylococcus aureus and Pseudomonas aeruginosa, by destroying the cell membrane. Meanwhile, the GEO nanoemulsion exhibited better preservation effects on chilled chicken breasts than non-emulsified GEO and could effectively prolong the shelf life of chicken breasts for 6 days. This research provides a green and low-cost method for preparing GEO nanoemulsion to control the risk of foodborne pathogens.

Development and characterization of levan/pullulan/chitosan edible films enriched with ε-polylysine for active food packaging

The levan/pullulan/chitosan edible films, enriched with ε-polylysine, as an antimicrobial agent, were successfully fabricated by the casting method, and their applicability for food packaging was systematically evaluated by several analytical techniques. An increase in the levan/pullulan ratios (ranged from 0:6 to 3:3) in the films showed a decreased water solubility (from 72.21% to 26.64%) and oxygen permeability (from 48.75 × 10^-2 g·mm·m^-2·d^-1·kPa^-1 to 4.45 × 10^-2 g·mm·m^-2·d^-1·kPa^-1), and increased elongation at break (from 10.92% to 46.61%). All the films showed a strong inhibitory effect on two typical food-borne pathogens and good biodegradability in the soil. These films were employed as edible coatings on strawberries, and the storage stability was investigated by means of physical and biochemical parameters. Compared to control, the weight loss, firmness, and total soluble solids of the coated strawberries showed a downward trend. Overall, these findings suggest that the developed edible films could be a potential approach for sustainable active food packaging.

Preparation and characterization of gelatin/zein nanofiber films loaded with perillaldehyde, thymol, or ɛ-polylysine and evaluation of their effects on the preservation of chilled chicken breast

Three edible food packaging films loaded with perillaldehyde (P), thymol (T), or ɛ-polylysine (ɛ-PL) in gelatin/zein (G/Z) nanofibers were prepared and characterized. Their effects on the preservation of chilled chicken breast were evaluated. Results showed that the addition of perillaldehyde, thymol, and ɛ-polylysine improved the morphology and diameter of the G/Z. Loading with perillaldehyde improved the elongation and tensile strength of the G/Z/P by 18% and 55%, respectively. The water vapor permeability and oxygen permeability of the G/Z/P were lower than those of the G/Z/T and G/Z/ɛ-PL. X-ray diffraction, differential scanning calorimetry suggested that perillaldehyde enhanced the thermal stability of the G/Z/P. Measurements of 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), total volatile basic nitrogen, and total viable bacterial counts demonstrated that the G/Z/P had good bio-compatibility and effectively prolonged the shelf life of chilled chicken breasts by over 6 days. Therefore, the G/Z/P developed herein has potential application in chilled meat packaging.

Low temperature extrusion blown ε-polylysine hydrochloride-loaded starch/gelatin edible antimicrobial films

Edible antimicrobial films made from starch/gelatin (S/G) incorporated with different ε-polylysine hydrochloride (ε-PL) contents were developed by low-temperature extrusion blowing process. ε-PL addition reduced the complex viscosity and storage modulus of blends, while promoted the formation of hydrogen bonding among film components. The control film had an A-type crystalline structure, while increasing the ε-PL content promoted its transformation to B-shaped structure. Without ε-PL and under the processing temperature used, the starch granules were not sufficiently gelatinized. However, ε-PL addition significantly enhanced the gelatinization degree. Increasing ε-PL content in S/G films increased film flexibility, water contact angle value, swelling degree, antimicrobial effect, and storage period of fresh bread, but decreased water vapor permeability and tensile strength. S/G film with 4 wt% ε-PL had the highest water contact angle (94°) and elongation at break (149%). This research demonstrates the plasticizing effects of ε-PL and potential of S/G films containing ε-PL for food preservation/packaging.

Electrospun Nanofibers: Current Progress and Applications in Food Systems

Electrospinning has the advantages of simple manufacturing equipment, a low spinning cost, wide range of spinnable materials, and a controllable mild process, which can continuously fabricate submicron or nanoscale ultrafine polymer fibers without high temperature or high pressure. The obtained nanofibrous films may have a large specific surface area, unique pore structure, and easy-to-modify surface characteristics. This review briefly introduces the types and fiber structures of electrospinning and summarizes the applications of electrospinning for food production (e.g., delivery systems for functional food, filtration of beverages), food packaging (e.g., intelligent packaging, antibacterial packaging, antioxidant packaging), and food analysis (e.g., pathogen detection, antibiotic detection, pesticide residue detection, food compositions analysis), focusing on the advantages of electrospinning applications in food systems. Furthermore, the limitations and future research directions of the technique are discussed.