Lipase immobilization with support materials, preparation techniques, and applications: Present and future aspects

Enhanced catalytic performance of Candida rugosa lipase through immobilization on zirconium-2-methylimidazole: A novel biocatalyst approach

Immobilization of enzymes on suitable supports is a critical approach for enhancing enzyme stability, reusability, and overall catalytic efficiency. This study explores the immobilization of Candida rugosa lipase on zirconium-based 2-methylimidazole (ZrMI) nanoparticles, aiming to develop a stable and reusable biocatalyst. The ZrMI was produced via a solvothermal technique and analyzed using various characterization methods. Candida rugose lipase was immobilized using cross-linking agents, achieving an 87 % immobilization efficiency. The immobilized enzyme exhibited significantly enhanced thermal stability, broader pH tolerance, and increased catalytic efficiency compared to free C. rugose lipase. The ZrMI@lipase retained 69 % of its enzymatic activity following a 60-day storage period at 4 °C. Notably, it displayed significant reusability, maintaining 65 % of its original activity after undergoing 15 catalytic cycles. Examination of the kinetics revealed that the immobilized enzyme possessed a heightened substrate affinity (Km of 4.1 mM) and maximal reaction rate (Vmax of 85.7 μmol/ml/min) in comparison to the free enzyme (Km of 5.4 mM and Vmax of 69 μmol/ml/min), indicating enhanced catalytic efficiency. Validation through zeta potential and hydrodynamic size assessments verified the successful binding of the enzyme and the consistent colloidal characteristics. These results suggest that ZrMI is a promising support for C. rugose lipase immobilization, offering improved stability and reusability for various industrial applications. The study highlights the potential of ZrMI@lipase as an efficient and durable biocatalyst, contributing to advancements in enzyme immobilization technology and sustainable industrial processes.

In-situ stabilized lipase in calcium carbonate microparticles for activation in solvent-free transesterification for biodiesel production

Biodiesel serves as a crucial biofuel alternative to petroleum-based diesel fuels, achieved through enzymatic transesterification of oil substrates. This study aims to investigate stabilized lipase (LP) within calcium carbonate (CaCO3) microparticles as a catalyst for solvent-free transesterification in biodiesel synthesis. The specific hydrolysis activity of the in-situ immobilized LP was 66% of that of free LP. However, the specific transesterification activity of immobilized LP in the solvent-free phase for biodiesel production was 2.29 times higher than that of free LP. These results suggest that the interfacial activation of LP molecules is facilitated by the inorganic CaCO3 environment. The immobilized LP demonstrated higher biodiesel production levels with superior stability compared to free LP, particularly regarding methanol molar ratio and temperature. To the best of our knowledge, there are no previous reports on the in-situ immobilization of LP in a CaCO3 carrier without any crosslinker as an interfacial-activated biocatalyst for biodiesel production.

Amino-Alkyl Group Dual-Functional Modification Synergistically Regulated Lipase-Carrier Interactions and Enhanced Phytosterol Ester Synthesis Efficiency

Precisely controlling enzyme conformation to enhance catalytic performance is a highly sought-after yet challenging goal in the immobilization of biocatalysts. Excessively strong enzyme-carrier interactions can restrict enzyme dynamics and reduce catalytic efficiency, while excessively weak interactions may lead to enzyme leakage, thereby reducing reusability. In this study, we developed a novel strategy to finely regulate the interaction between the carrier and the enzyme through the adjustment of the ratio of amino and octadecyl functional groups. The expressed activity of the novel immobilized lipase, CRL@AOMR, was 1.32- and 2.34-fold higher than that of the monofunctional macroporous resin. Moreover, the synthesis of various phytosterol esters in solvent-free systems was conducted as a model reaction to investigate the utilization of CRL@AOMR in different reactions. Under optimized conditions, an impressive yield of 96.1% for phytosterol oleate was achieved and a yield of 76.2% was maintained even after six cycles of utilization (288 h). This study demonstrates the potential feasibility of developing immobilization strategies via dual modification of amino and alkyl groups, which is a potential general strategy for other enzymes with surface lysine.

Enhancement of thermostability and expression level of Rasamsonia emersonii lipase in Pichia pastoris and its application in biodiesel production in a continuous flow reactor

The acidic lipase from Rasamsonia emersonii named LIPR has great potential for biodiesel synthesis due to its strong methanol tolerance. Nonetheless, the limited thermostability of LIPR and low expression level in Escherichia coli remain major obstacles to its use in biodiesel synthesis. To enhance the thermostability, the mutant LIPR harboring mutations A126C-P238C for the formation of a new disulfide bond and amino acid substitution D214L was obtained through rational design. To our delight, the thermostability of LIPR mutant was greatly improved. Moreover, a comprehensive optimization strategy, such as employing the Mss signal peptide, co-expressing the molecular chaperone protein disulfide isomerase (PDI), knocking out the vacuolar sorting receptor gene VPS10-01, and overexpressing the dihydroxyacetone synthase gene DAS2, was adopted to obtain the combination-optimized mutant Pichia pastoris strain GS54. Furthermore, the biodiesel synthetic capability with the mutant GS54-LIPR was verified and the production yield was 52.2 % after 24 h in a shake flask. Subsequently, a continuous flow system was adopted to increase the biodiesel yield to 73.6 % within 3 h, demonstrating its efficacy in enhancing enzyme biocatalysis. The engineered GS54-LIPR mutant lipase is an efficient and reusable biocatalyst for the sustained production of biodiesel in a continuous flow reaction.

Hyperactivation of crosslinked lipases in elastic hydroxyapatite microgel and their properties

Effective enzyme stabilization through immobilization is essential for the functional usage of enzymatic reactions. We propose a new method for synthesizing elastic hydroxyapatite microgel (E-HAp-M) materials and immobilizing lipase using this mesoporous mineral via the ship-in-a-bottle-neck strategy. The physicochemical parameters of E-HAp-M were thoroughly studied, revealing that E-HAp-M provides efficient space for enzyme immobilization. As a model enzyme, lipase (LP) was entrapped and then cross-linked enzyme structure, preventing leaching from mesopores, resulting in highly active and stable LP/E-HAp-M composites. By comparing LP activity under different temperature and pH conditions, it was observed that the cross-linked LP exhibited improved thermal stability and pH resistance compared to the free enzyme. In addition, they demonstrated a 156% increase in catalytic activity compared with free LP in hydrolysis reactions at room temperature. The immobilized LP maintained 45% of its initial activity after 10 cycles of recycling and remained stable for over 160 days. This report presents the first demonstration of a stabilized cross-linked LP in E-HAp-M, suggesting its potential application in enzyme-catalyzed processes within biocatalysis technology.

Enzyme immobilization with nanomaterials for hydrolysis of lignocellulosic biomass: Challenges and future Perspectives

Enzyme immobilization has emerged as a prodigious strategy in the enzymatic hydrolysis of lignocellulosic biomass (LCB) promising enhanced efficacy and stability of the enzymes. Further, enzyme immobilization on magnetic nanoparticles (MNPs) facilitates the easy recovery and reuse of biocatalysts. This results in the development of a nanobiocatalytic system, that serves as an eco-friendly and inexpensive LCB deconstruction approach. This review provides an overview of nanomaterials used for immobilization with special emphasis on the nanomaterial-enzyme interactions and strategies of immobilization. After the succinct outline of the immobilization procedures and supporting materials, a comprehensive assessment of the catalysis enabled by nanomaterial-immobilized biocatalysts for the conversion and degradation of lignocellulosic biomasses is provided by gathering state-of-the-art examples. The challenges and future directions associated with this technique providing a potential solution in the present article. Insight on the recent advancements in the process of nanomaterial-based immobilization for the hydrolysis of lignocellulosic biomass has also been highlighted in the article.

Immobilization of Lipase from Thermomyces Lanuginosus and Its Glycerolysis Ability in Diacylglycerol Preparation

In the glycerolysis process for diacylglycerol (DAG) preparation, free lipases suffer from poor stability and the inability to be reused. To address this, a cost-effective immobilized lipase preparation was developed by cross-linking macroporous resin with poly (ethylene glycol) diglycidyl ether (PEGDGE) followed by lipase adsorption. The selected immobilization conditions were identified as pH 7.0, 35 °C, cross-linking agent concentration 2.0%, cross-linking time 4 h, lipase amount 5 mg/g of support, and adsorption time 4 h. Enzymatic properties of the immobilized lipase were analyzed, revealing enhanced pH stability, thermal stability, storage stability, and operational stability post-immobilization. The conditions for immobilized enzyme-catalyzed glycerolysis to produce DAG were selected, demonstrating the broad applicability of the immobilized lipase. The immobilized lipase catalyzed glycerolysis reactions using various oils as substrates, with DAG content in the products ranging between 35 and 45%, demonstrating broad applicability. Additionally, the changes during the repeated use of the immobilized lipase were characterized, showing that mechanical damage, lipase leakage, and alterations in the secondary structure of the lipase protein contributed to the decline in catalytic activity over time. These findings provide valuable insights for the industrial application of lipase.

Application of Hierarchically Porous Chitosan Monolith for Enzyme Immobilization

Enzyme immobilization is a crucial technique for improving the stability of enzymes. Compared with free enzymes, immobilized enzymes offer several advantages in industrial applications. Efficient enzyme immobilization requires a technique that integrates the advantages of physical absorption and covalent binding while addressing the limitations of conventional support materials. This study offers a practical approach for immobilizing α-amylase on a hierarchically porous chitosan (CS) monolith. An optimized CS monolith was fabricated using chemically modified chitin by thermally induced phase separation. By combining physical adsorption and covalent bonding, this technique leverages the amino and hydroxy groups present in CS to facilitate effective enzyme binding and stability. α-Amylase immobilized on the CS monolith demonstrated excellent stability, reusability, and increased activity compared to its soluble counterpart across various pH levels and temperatures. In addition, the CS monolith exhibited a significant potential to immobilize other enzymes, namely, lipase and catalase. Immobilized lipase and catalase exhibited higher loading capacities and enhanced activities than their soluble forms. This versatility highlights the broad applicability of CS monoliths as support materials for various enzymatic processes. This study provides guidelines for fabricating hierarchical porous monolith structures that can provide efficient enzyme utilization in flow systems and potentially enhance the cost-effectiveness of enzymes in industrial applications.

Advancements in enzyme immobilization on magnetic nanomaterials: toward sustainable industrial applications

Enzymes are widely used in biofuels, food, and pharmaceuticals. The immobilization of enzymes on solid supports, particularly magnetic nanomaterials, enhances their stability and catalytic activity. Magnetic nanomaterials are chosen for their versatility, large surface area, and superparamagnetic properties, which allow for easy separation and reuse in industrial processes. Researchers focus on the synthesis of appropriate nanomaterials tailored for specific purposes. Immobilization protocols are predefined and adapted to both enzymes and support requirements for optimal efficiency. This review provides a detailed exploration of the application of magnetic nanomaterials in enzyme immobilization protocols. It covers methods, challenges, advantages, and future perspectives, starting with general aspects of magnetic nanomaterials, their synthesis, and applications as matrices for solid enzyme stabilization. The discussion then delves into existing enzymatic immobilization methods on magnetic nanomaterials, highlighting advantages, challenges, and potential applications. Further sections explore the industrial use of various enzymes immobilized on these materials, the development of enzyme-based bioreactors, and prospects for these biocatalysts. In summary, this review provides a concise comparison of the use of magnetic nanomaterials for enzyme stabilization, highlighting potential industrial applications and contributing to manufacturing optimization.

Hydrophobic Clusters Regulate Surface Hydration Dynamics of Bacillus subtilis Lipase A

The surface hydration diffusivity of Bacillus subtilis Lipase A (BSLA) has been characterized by low-field Overhauser dynamic nuclear polarization (ODNP) relaxometry using a series of spin-labeled constructs. Sites for spin-label incorporation were previously designed via an atomistic computational approach that screened for surface exposure, reflective of the surface hydration comparable to other proteins studied by this method, as well as minimal impact on protein function, dynamics, and structure of BSLA by excluding any surface site that participated in greater than 30% occupancy of a hydrogen bonding network within BSLA. Experimental ODNP relaxometry coupling factor results verify the overall surface hydration behavior for these BSLA spin-labeled sites similar to other globular proteins. Here, by plotting the ODNP parameters of relative diffusive water versus the relative bound water, we introduce an effective "phase-space" analysis, which provides a facile visual comparison of the ODNP parameters of various biomolecular systems studied to date. We find notable differences when comparing BSLA to other systems, as well as when comparing different clusters on the surface of BSLA. Specifically, we find a grouping of sites that correspond to the spin-label surface location within the two main hydrophobic core clusters of the branched aliphatic amino acids isoleucine, leucine, and valine cores observed in the BSLA crystal structure. The results imply that hydrophobic clustering may dictate local surface hydration properties, perhaps through modulation of protein conformations and samplings of the unfolded states, providing insights into how the dynamics of the hydration shell is coupled to protein motion and fluctuations.

Enhancing biocatalyst performance through immobilization of lipase (Eversa® Transform 2.0) on hybrid amine-epoxy core-shell magnetic nanoparticles

Magnetic nanoparticles were functionalized with polyethylenimine (PEI) and activated with epoxy. This support was used to immobilize Lipase (Eversa® Transform 2.0) (EVS), optimization using the Taguchi method. XRF, SEM, TEM, XRD, FTIR, TGA, and VSM performed the characterizations. The optimal conditions were immobilization yield (I.Y.) of 95.04 ± 0.79 %, time of 15 h, ionic load of 95 mM, protein load of 5 mg/g, and temperature of 25 °C. The maximum loading capacity was 25 mg/g, and its stability in 60 days of storage showed a negligible loss of only 9.53 % of its activity. The biocatalyst demonstrated better stability at varying temperatures than free EVS, maintaining 28 % of its activity at 70 °C. It was feasible to esterify free fatty acids (FFA) from babassu oil with the best reaction of 97.91 % and ten cycles having an efficiency above 50 %. The esterification of produced biolubricant was confirmed by NMR, and it displayed kinematic viscosity and density of 6.052 mm2/s and 0.832 g/cm3, respectively, at 40 °C. The in-silico study showed a binding affinity of -5.8 kcal/mol between EVS and oleic acid, suggesting a stable substrate-lipase combination suitable for esterification.

Improved lipase performance by covalent immobilization of Candida antarctica lipase B on amino acid modified microcrystalline cellulose as green renewable support

Development of immobilized lipase with excellent catalytic performance and low cost is the major challenge for large-scale industrial applications. In this study, green renewable microcrystalline cellulose (MCC) that was hydrophobically modified with D-alanine (Ala) or L-lysine (Lys) was used for immobilizing Candida antarctica lipase B (CALB). The improved catalytic properties were investigated by experimental and computational methods. CALB immobilized on MCC-Ala with higher hydrophobicity showed better catalytic activity than CALB@MCC-Lys because the increased flexibility of the lid region of CALB@MCC-Ala favored the formation of open conformation. Additionally, the low root mean square deviation and the high β-sheet and α-helix contents of CALB@MCC-Ala indicated that the structure became more stable, leading to a significantly enhanced stability (54.80% and 90.90% relative activity at 70 °C and pH 9.0, respectively) and good reusability (48.92% activity after 5 cycles). This study provides a promising avenue to develop immobilized lipase with high catalytic properties for industry applications.

Characterization of a recombinant Aspergillus niger GZUF36 lipase immobilized by ionic liquid modification strategy

Enzyme immobilized on magnetic nanomaterials is a promising biocatalyst with efficient recovery under applied magnets. In this study, a recombinant extracellular lipase from Aspergillus niger GZUF36 (PEXANL1) expressed in Pichia pastoris GS115 was immobilized on ionic liquid-modified magnetic nano ferric oxide (Fe3O4@SiO2@ILs) via electrostatic and hydrophobic interaction. The morphology, structure, and properties of Fe3O4@SiO2@ILs and immobilized PEXANL1 were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, x-ray diffraction, vibration sample magnetometer, and zeta potential analysis. Under optimized conditions, the immobilization efficiency and activity recovery of immobilized PEXANL1 were 52 ± 2% and 122 ± 2%, respectively. The enzymatic properties of immobilized PEXANL1 were also investigated. The results showed that immobilized PEXANL1 achieved the maximum activity at pH 5.0 and 45 °C, and the lipolytic activity of immobilized PEXANL1 was more than twice that of PEXANL1. Compared to PEXANL1, immobilized PEXANL1 exhibited enhanced tolerance to temperature, metal ions, surfactants, and organic solvents. The operation stability experiments revealed that immobilized PEXANL1 maintained 86 ± 3% of its activity after 6 reaction cycles. The enhanced catalytic performance in enzyme immobilization on Fe3O4@SiO2@ILs made nanobiocatalysts a compelling choice for bio-industrial applications. Furthermore, Fe3O4@SiO2@ILs could also benefit various industrial enzymes and their practical uses. KEY POINTS: • Immobilized PEXANL1 was confirmed by SEM, FT-IR, and XRD. • The specific activity of immobilized PEXANL1 was more than twice that of PEXANL1. • Immobilized PEXANL1 had improved properties with good operational stability.

Enzymatic production process of capric acid-rich structured lipids: Development of formulation as a new therapeutic approach

The present work reports an optimization of the synthesis of MLM-type (medium, long, medium) structured lipids (SL) through an acidolysis reaction of grape seed oil with capric acid catalyzed by Rhizopus oryzae lipase immobilized. At first, tests were carried out by preparing the biocatalysts using enzyme loadings (0.15 to 1 g of enzymatic powder) for each gram of support. Enzyme loading was used 0.3 g of enzymatic powder, and hydrolytic activity of 1860 ± 23.4 IU/g was reached. Optimized conditions determined by the Central Composite Rotatable Design (CCRD) revealed that the acidolysis reaction reached approximately 59 % incorporation degree (%ID) after 24 h, in addition to the fact that the biocatalyst could maintain the incorporation degree in five consecutive cycles. From this high incorporation degree, cell viability assays were performed with murine fibroblast cell lines and human cervical adenocarcinoma cell lines. Concerning the cytotoxicity assays, the concentration of MLM-SL to 1.75 and 2 % v/v were able to induce cell death in 56 % and 64 % of adenocarcinoma cells, respectively. Human cervical adenocarcinoma cells showed greater sensitivity to the induction of cell death when using emulsions with MLM-SL > 1.75 % v/v compared to emulsions with lower content indicating a potential for combating carcinogenic cells.

Resolution of N-acetyl-DL-methionine methyl ester by the lipase from Brucella thiophenivorans

In this study, lipase-catalyzed resolution of N-acetyl-DL-methionine methyl ester (N-Ac-DL-MetOMe) was evaluated. A lipase from Brucella thiophenivorans was prone to exhibit high activity and excellent enantioselectivity toward N-Ac-DL-MetOMe to produce the key chiral intermediate N-acetyl-L-methionine methyl ester (N-Ac-L-MetOMe). The results showed that the enzymatic reaction was carried out in 100 g/L racemic substrate for 2 h, the conversion reached 51.3%, the enantiomeric excess value N-Ac-L-MetOMe exceeded 99%, and the enantiomeric ratio value >200. Therefore, the lipase from B. thiophenivorans has potential prospects for the resolution of N-Ac-DL-MetOMe to produce the important intermediate N-Ac-L-MetOMe.

Novel Hybrid Gel-Fiber Membranes as Carriers for Lipase Catalysis Based on Electrospinning and Gelation Technology

An excellent oil-water interface is one of the prerequisites for effective lipase catalysis. Therefore, this study aimed to improve lipase activity in terms of catalytic interface optimization. A novel approach for constructing oil-water interfaces was proposed. The structural similarity and the hydrophilic differences between polyvinyl pyrrolidone gel-fiber membranes (GFMs) and poly(lauryl methacrylate) (PLMA) organogel inspired us to hybridize the two to form PVP/PLMA hybrid gel-fiber membranes (HGFMs) based on electrospinning and gelation. The prepared PVP/PLMA-HGFMs were capable of being adopted as novel carriers for lipase catalysis due to their ability to swell both in the aqueous phase (swelling ratio = 187.5%) and the organic phase (swelling ratio = 40.5%). Additionally, Confocal laser scanning microscopy (CLSM) results showed that abundant network pores inside the carriers enabled numerous effective microscopic oil-water interfaces. The catalytic activity of Burkholderia cepacia lipase (BCL) in PVP/PLMA-HGFMs ranged between 1.21 and 8.70 times that of the control ("oil-up/water-down" system) under different experimental conditions. Meanwhile, PVP/PLMA-HGFMs increased lipase activity by about eight times at -20 °C and had good application characteristics at extreme pH conditions.

An Overview of Crosslinked Enzyme Aggregates: Concept of Development and Trends of Applications

Enzymes are commonly used as biocatalysts for various biological and chemical processes in industrial applications. However, their limited operational stability, catalytic efficiency, poor reusability, and high-cost hamper further industrial usage. Thus, crosslinked enzyme aggregates (CLEAs) are developed as a better enzyme immobilization tool to extend the enzymes' operational stability. This immobilization method is appealing because it is simpler due to the absence of ballast and permits the collective use of crude enzyme cocktails. CLEAs, so far, have been successfully developed using a variety of enzymes, viz., hydrolases, proteases, amidases, lipases, esterases, and oxidoreductase. Recent years have seen the emergence of novel strategies for preparing better CLEAs, which include the combi- and multi-CLEAs, magnetics CLEAs, and porous CLEAs for various industrial applications, viz., laundry detergents, organic synthesis, food industries, pharmaceutical applications, oils, and biodiesel production. To better understand the different strategies for CLEAs' development, this review explores these strategies and highlights the relevant concerns in designing innovative CLEAs. This article also details the challenges faced during CLEAs preparation and solutions for overcoming them. Finally, the trending strategies to improve the preparation of CLEAs alongside their industrial application trends are also discussed.

Recent applications and future prospects of magnetic biocatalysts

Magnetic biocatalysts combine magnetic properties with the catalytic activity of enzymes, achieving easy recovery and reuse in biotechnological processes. Lipases immobilized by magnetic nanoparticles dominate. This review covers an advanced bibliometric analysis and an overview of the area, elucidating research advances. Using WoS, 34,949 publications were analyzed and refined to 450. The prominent journals, countries, institutions, and authors that published the most were identified. The most cited articles showed research hotspots. The analysis of the themes and keywords identified five clusters and showed that the main field of research is associated with obtaining biofuels derived from different types of sustainable vegetable oils. The overview of magnetic biocatalysts showed that these materials are also employed in biosensors, photothermal therapy, environmental remediation, and medical applications. The industry shows a significant interest, with the number of patents increasing. Future studies should focus on immobilizing new lipases in unique materials with magnetic profiles, aiming to improve the efficiency for various biotechnological applications.

Isolation of Fatty Acids from the Enzymatic Hydrolysis of Capsaicinoids and Their Use in Enzymatic Acidolysis of Coconut Oil

Herein we report the optimization of enzymatic hydrolysis of a mixture of capsaicinoids, capsaicin and dihydrocapsaicin obtained from chili peppers, and the utilization of the isolated fatty acids for the modification of coconut oil using enzyme catalyzed acidolysis. This work was carried out as the fatty acids that can be isolated from capsaicinoid hydrolysis have been shown to possess interesting biological properties. These biological properties could be better exploited by incorporating the fatty acids into a suitable delivery vehicle. The enzymatic hydrolysis of the mixture of capsaicin and dihydrocapsaicin was carried out using Novozym® 435 in phosphate buffer (pH 7.0) at 50℃. The enzyme catalyst could be reused in multiple cycles of the hydrolysis reaction. The desired 8-methyl-6-trans-nonenoic acid and 8-methylnonanoic acid were isolated from the hydrolysis reaction mixture using a simple extraction procedure with a 47.8% yield. This was carried out by first extracting the reaction mixture at pH 10 with ethyl acetate to remove any dissolved capsaicinoids and vanillyl amine side product. The fatty acids were isolated after adjustment of the pH of the reaction mixture to 5 and second extraction with ethyl acetate. The acidolysis of coconut oil with the obtained fatty acids was performed using Lipozyme® TL IM. The performance of the acidolysis reaction was evaluated using 1H-NMR spectroscopy and verified in selected cases using gas chromatography. The best performing conditions involved carrying out the acidolysis reaction at 60℃ with a 1.2 w/w ratio of the fatty acids to coconut oil and 10% enzyme loading for 72 h. This resulted in the incorporation of 26.61% and 9.86% of 8-methyl-6-trans-nonenoic acid and 8-methylnonanoic acid, respectively, into the modified coconut oil product. This product can act as a potential delivery vehicle for these interesting compounds.

Can vitamin E ester derivatives be excellent alternatives of vitamin E: state of art

Vitamin E (VE) is a natural antioxidant which is widely used in the food fields, while the shortcomings of easy oxidative inactivation and poor water solubility limit its application. Vitamin E esters' (VEEs) derivatives, such as vitamin E acetate (VEA), are more stable and easier to be absorbed while have similar biological activities and physiological functions compared with VE. In this systematic review, the digestion, absorption and physiological function of VEEs were summarized. To promote their further industrial applications, the synthesis strategies of VEEs were also summarized in-depth. In particular, as a new generation of green solvents, ionic liquids (ILs) have been widely used in enzymatic reactions due to the stabilization and activation of enzymes. Their applications in enzymatic synthesis of VEEs were summarized and discussed. Finally, several future perspectives for developing more efficiency strategies of VEEs synthesis, such as enzyme engineering and design of novel ILs, were also discussed.

COF-300-AR@CRL as a two-in-one nanocatalyst for one-step chemiluminescent detection of diphenyl ether herbicide residues in vegetable and fruit samples

A sensitive and accurate chemiluminescence (CL) method was developed for one-step determination of diphenyl ether herbicides at trace level with nitrofen (2,4-dichlorophenyl-p-nitrophenyl ether) as a model analyte. Candida rugosa lipase (CRL) was immobilized on a nanocarrier of amine-linked covalent organic framework (named as COF-300-AR) through a self-assembly strategy. The formed nanocomposite of COF-300-AR@CRL owns dual enzymatic catalytic activities. It can directly catalyze luminol-dissolved oxygen reaction to produce an intense CL emission by virtue of oxidase mimic activity of COF-300-AR but also effectively decompose nitrofen to release phenolic compounds by the immobilized CRL. The released phenolic compounds own strong reducing capacity and in turn decrease the CL signal sharply. Under the optimal conditions, the decreased CL intensity presents a good linear response to nitrofen concentration in the 0.02-50.0 μM range. The limit of detection (LOD, 3sb/S) is 11 nM and the precision is 2.0% for replicate measurements of 50.0 nM nitrofen solution (n = 11). This method has the advantages of rapid analytical efficiency, good selectivity, satisfactory stability, and recyclability. Recovery experiments were conducted on spiked vegetable and fruit samples with the recoveries falling in the range 90.0-107.0%.

Trends in the Use of Lipases: A Systematic Review and Bibliometric Analysis

Scientific mapping using bibliometric data network analysis was applied to analyze research works related to lipases and their industrial applications, evaluating the current state of research, challenges, and opportunities in the use of these biocatalysts, based on the evaluation of a large number of publications on the topic, allowing a comprehensive systematic data analysis, which had not yet been conducted in relation to studies specifically covering lipases and their industrial applications. Thus, studies involving lipase enzymes published from 2018 to 2022 were accessed from the Web of Science database. The extracted records result in the analysis of terms of bibliographic compatibility among the articles, co-occurrence of keywords, and co-citation of journals using the VOSviewer algorithm in the construction of bibliometric maps. This systematic review analysis of 357 documents, including original and review articles, revealed studies inspired by lipase enzymes in the research period, showing that the development of research, together with different areas of knowledge, presents good results related to the applications of lipases, due to information synchronization. Furthermore, this review showed the main challenges in lipase applications regarding increased production and operational stability; establishing well-defined evaluation criteria, such as cultivation conditions, activity, biocatalyst stability, type of support and reactor; thermodynamic studies; reuse cycles; and it can assist in defining goals for the development of successful large-scale applications, showing several points for improvement of future studies on lipase enzymes.

Molecular Modeling Insights into Metal-Organic Frameworks (MOFs) as a Potential Matrix for Immobilization of Lipase: An In Silico Study

CRL is a highly versatile enzyme that finds extensive utility in numerous industries, which is attributed to its selectivity and catalytic efficiency, which have been impeded by the impracticality of its implementation, leading to a loss of native catalytic activity and non-reusability. Enzyme immobilization is a necessary step for enabling its reuse, and it provides methods for regulating the biocatalyst's functional efficacy in a synthetic setting. MOFs represent a novel category of porous materials possessing distinct superlative features that make MOFs an optimal host matrix for developing enzyme-MOF composites. In this study, we employed molecular modeling approaches, for instance, molecular docking and MD simulation, to explore the interactions between CRL and a specific MOF, ZIF-8. The present study involved conducting secondary structural analysis and homology modeling of CRL, followed by docking ZIF-8 with CRL. The results of the molecular docking analysis indicate that ZIF-8 was situated within the active site pocket of CRL, where it formed hydrogen bonds with Val-81, Phe-87, Ser-91, Asp-231, Thr-132, Lue-297, Phe-296, Phe-344, Thr-347, and Ser-450. The MD simulation analysis revealed that the CRL and ZIF-8 docked complex exhibited stability over the entire simulation period, and all interactions presented in the initial docked complex were maintained throughout the simulation. The findings derived from this investigation could promote comprehension of the molecular mechanisms underlying the interaction between CRL and ZIF-8 as well as the development of immobilized CRL for diverse industrial purposes.

Immobilization of Lipase B from Candida antarctica on Magnetic Nanoparticles Enhances Its Selectivity in Kinetic Resolutions of Chiral Amines with Several Acylating Agents

In lipase-catalyzed kinetic resolutions (KRs), the choice of immobilization support and acylating agents (AAs) is crucial. Lipase B from Candida antarctica immobilized onto magnetic nanoparticles (CaLB-MNPs) has been successfully used for diverse KRs of racemic compounds, but there is a lack of studies of the utilization of this potent biocatalyst in the KR of chiral amines, important pharmaceutical building blocks. Therefore, in this work, several racemic amines (heptane-2-amine, 1-methoxypropan-2-amine, 1-phenylethan-1-amine, and 4-phenylbutan-2-amine, (±)-1a-d, respectively) were studied in batch and continuous-flow mode utilizing different AAs, such as diisopropyl malonate 2A, isopropyl 2-cyanoacetate 2B, and isopropyl 2-ethoxyacetate 2C. The reactions performed with CaLB-MNPs were compared with Novozym 435 (N435) and the results in the literature. CaLB-MNPs were less active than N435, leading to lower conversion, but demonstrated a higher enantiomer selectivity, proving to be a good alternative to the commercial form. Compound 2C resulted in the best balance between conversion and enantiomer selectivity among the acylating agents. CaLB-MNPs proved to be efficient in the KR of chiral amines, having comparable or superior properties to other CaLB forms utilizing porous matrices for immobilization. An additional advantage of using CaLB-MNPs is that the purification and reuse processes are facilitated via magnetic retention/separation. In the continuous-flow mode, the usability and operational stability of CaLB-MNPs were reaffirmed, corroborating with previous studies, and the results overall improve our understanding of this potent biocatalyst and the convenient U-shape reactor used.

Towards further understanding the applications of endophytes: enriched source of bioactive compounds and bio factories for nanoparticles

The most significant issues that humans face today include a growing population, an altering climate, an growing reliance on pesticides, the appearance of novel infectious agents, and an accumulation of industrial waste. The production of agricultural goods has also been subject to a great number of significant shifts, often known as agricultural revolutions, which have been influenced by the progression of civilization, technology, and general human advancement. Sustainable measures that can be applied in agriculture, the environment, medicine, and industry are needed to lessen the harmful effects of the aforementioned problems. Endophytes, which might be bacterial or fungal, could be a successful solution. They protect plants and promote growth by producing phytohormones and by providing biotic and abiotic stress tolerance. Endophytes produce the diverse type of bioactive compounds such as alkaloids, saponins, flavonoids, tannins, terpenoids, quinones, chinones, phenolic acids etc. and are known for various therapeutic advantages such as anticancer, antitumor, antidiabetic, antifungal, antiviral, antimicrobial, antimalarial, antioxidant activity. Proteases, pectinases, amylases, cellulases, xylanases, laccases, lipases, and other types of enzymes that are vital for many different industries can also be produced by endophytes. Due to the presence of all these bioactive compounds in endophytes, they have preferred sources for the green synthesis of nanoparticles. This review aims to comprehend the contributions and uses of endophytes in agriculture, medicinal, industrial sectors and bio-nanotechnology with their mechanism of action.

A Review of Chitosan and Chitosan Nanofiber: Preparation, Characterization, and Its Potential Applications

Chitosan is produced by deacetylating the abundant natural chitin polymer. It has been employed in a variety of applications due to its unique solubility as well as its chemical and biological properties. In addition to being biodegradable and biocompatible, it also possesses a lot of reactive amino side groups that allow for chemical modification and the creation of a wide range of useful derivatives. The physical and chemical characteristics of chitosan, as well as how it is used in the food, environmental, and medical industries, have all been covered in a number of academic publications. Chitosan offers a wide range of possibilities in environmentally friendly textile processes because of its superior absorption and biological characteristics. Chitosan has the ability to give textile fibers and fabrics antibacterial, antiviral, anti-odor, and other biological functions. One of the most well-known and frequently used methods to create nanofibers is electrospinning. This technique is adaptable and effective for creating continuous nanofibers. In the field of biomaterials, new materials include nanofibers made of chitosan. Numerous medications, including antibiotics, chemotherapeutic agents, proteins, and analgesics for inflammatory pain, have been successfully loaded onto electro-spun nanofibers, according to recent investigations. Chitosan nanofibers have several exceptional qualities that make them ideal for use in important pharmaceutical applications, such as tissue engineering, drug delivery systems, wound dressing, and enzyme immobilization. The preparation of chitosan nanofibers, followed by a discussion of the biocompatibility and degradation of chitosan nanofibers, followed by a description of how to load the drug into the nanofibers, are the first issues highlighted by this review of chitosan nanofibers in drug delivery applications. The main uses of chitosan nanofibers in drug delivery systems will be discussed last.

Renewable, sustainable, and natural lignocellulosic carriers for lipase immobilization: A review

It is well-known that enzymes are molecules particularly susceptible to pH and temperature variations. Immobilization techniques may overcome this weakness besides improving the reusability of the biocatalysts. Given the strong push toward a circular economy, the use of natural lignocellulosic wastes as supports for enzyme immobilization has been increasingly attractive in recent years. This fact is mainly due to their high availability, low costs, and the possibility of reducing the environmental impact that can occur when they are improperly stored. In addition, they have physical and chemical characteristics suitable for enzyme immobilization (large surface area, high rigidity, porosity, reactive functional groups, etc.). This review aims to guide readers and provide them with the tools necessary to select the most suitable methodology for lipase immobilization on lignocellulosic wastes. The importance and the characteristics of an increasingly interesting enzyme, such as lipase, and the advantages and disadvantages of the different immobilization methods will be discussed. The various kinds of lignocellulosic wastes and the processing required to make them suitable as carriers will be also reported.

Climatic Chamber Stability Tests of Lipase-Catalytic Octyl-Sepharose Systems

The application of the climatic chamber presented in this paper to assess the storage stability of immobilized lipases is a new approach characterized by the potential of unifying the study conditions of biocatalysts created in various laboratories. The data achieved from storing lipases in the climatic chambers may be crucial for the chemical and pharmaceutical industry. Our paper describes the developed protocols for immobilization via interfacial activation of lipase B from Candida antarctica (CALB) and lipase OF from Candida rugosa (CRL-OF) on the Octyl-Sepharose CL-4B support. Optimization included buffers with different pH values of 4–9 and a wide range of ionic strength from 5 mM to 700 mM. It has been shown that the optimal medium for the CALB immobilization process on the tested support is a citrate buffer at pH 4 and high ionic strength of 500 mM. Implementing new optimal procedures enabled the hyperactivation of immobilized CALB (recovery activity 116.10 ± 1.70%) under the applicable reaction conditions using olive oil as a substrate. Importantly, CALB storage stability tests performed in a climatic chamber under drastic temperature and humidity conditions proved good stability of the developed biocatalyst (residual activity 218 ± 7.3% of dry form, after 7 days). At the same time, the low storage stability of CRL OF in a climatic chamber was demonstrated. It should be emphasized that the use of a climatic chamber to test the storage stability of a dry form of the studied lipases immobilized on Octyl-Sepharose CL-4B is, to our knowledge, described for the first time in the literature.

Bio-Based Materials versus Synthetic Polymers as a Support in Lipase Immobilization: Impact on Versatile Enzyme Activity

To improve enzyme stability, the immobilization process is often applied. The choice of a support on which the enzymes are adsorbed plays a major role in enhancing biocatalysts’ properties. In this study, bio-based (i.e., chitosan, coffee grounds) and synthetic (i.e., Lewatit VP OC 1600) supports were used in the immobilization of lipases of various microbial origins (yeast (Yarrowia lipolytica) and mold (Aspergillus oryzae)). The results confirmed that the enzyme proteins had been adsorbed on the surface of the selected carriers, but not all of them revealed comparably high catalytic activity. Immobilized CALB (Novozym 435) was used as a commercial reference biocatalyst. The best hydrolytic activity (higher than that of CALB) was observed for Novozym 51032 (lipase solution of A. oryzae) immobilized on Lewatit VP OC 1600. In terms of synthetic activity, there were only slight differences between the applied carriers for A. oryzae lipase, and the highest measures were obtained for coffee grounds. All of the biocatalysts had significantly lower activity in the synthesis reactions than the reference catalyst.

Synthesis and Characterization of Aminoamidine-Based Polyacrylonitrile Fibers for Lipase Immobilization with Effective Reusability and Storage Stability

Lipases are extensively utilized industrial biocatalysts that play an important role in various industrial and biotechnological applications. Herein, polyacrylonitrile (PAN) was treated with hexamethylene diamine (HMDA) and activated by glutaraldehyde, then utilized as a carrier support for Candida rugosa lipase. In this regard, the morphological structure of modified PAN before and after the immobilization process was evaluated using FTIR and SEM analyses. The immobilized lipase exhibited the highest activity at pH 8.0, with an immobilization yield of 81% and an activity of 91%. The optimal pH and temperature for free lipase were 7.5 and 40 °C, while the immobilized lipase exhibited its optimal activity at a pH of 8.0 and a temperature of 50 °C. After recycling 10 times, the immobilized lipase maintained 76% of its activity and, after 15 reuses, it preserved 61% of its activity. The lipase stability was significantly improved after immobilization, as it maintained 76% of its initial activity after 60 days of storage. The calculated Km values were 4.07 and 6.16 mM for free and immobilized lipase, and the Vmax values were 74 and 77 μmol/mL/min, respectively. These results demonstrated that synthetically modified PAN is appropriate for immobilizing enzymes and has the potential for commercial applications.

Construction of a Novel Lipase Catalytic System Based on Hybrid Membranes with Interwoven Electrospun Polyacrylic Acid and Polyvinyl Pyrrolidone Gel Fibers

Efficient lipase catalysis requires sufficient oil-water interface engineered through structural design. Inspired by the architectural features of fabrics, a novel lipase-membrane catalytic system with interwoven polyacrylic acid (PAA) gel fibers and polyvinyl pyrrolidone (PVP) gel fibers was developed in this study by using double-needle electrospinning and gelation. It has been demonstrated that PAA/PVP hybrid gel fiber membranes (HGFMs) have a high swelling capacity for both water and oil phases, which created numerous discontinuous oil-water contact surface units in limited space of HGFMs, consequently forming effective interfacial catalytic systems. Volume competition between the water and oil phases suggests that balancing the proportions of these phases is very important for effective construction of oil-water interfaces and conditioning catalysis. Regulation of multiple factors of PAA/PVP HGFMs resulted in a catalytic efficiency of up to 2.1 times that of a macroscopic "oil-up/water-down" system (room temperature, pH = 7), and 2.9 times when three membranes are superimposed, as well as excellent pH and temperature stability. HGFMs were stacked to build a high-performing catalytic performance reactor. We expect that this study will be a beneficial exploration for expanding the lipase catalytic system.

Synthesis of Ibuprofen Monoglyceride Using Novozym®435: Biocatalyst Activation and Stabilization in Multiphasic Systems

This work was focused on the enzymatic esterification of glycerol and ibuprofen at high concentrations in two triphasic systems composed of toluene+ibuprofene (apolar) and glycerol or glycerol–water (polar) liquid phases, and a solid phase with the industrial immobilized lipase B from Candida antarctica named Novozym®435 (N435) acting as the biocatalyst. Based on a preliminary study, the concentration of the enzyme was set at 30 g·L−1 and the stirring speed at 720 r.p.m to reduce external mass transfer limitations. To obtain more information on the reaction system, it was conducted at a wide range of temperatures (50 to 80 °C) and initial concentrations of ibuprofen (20–100 g·L−1, that is, 97 to 483 mM). Under these experimental conditions, the external mass transfer, according to the Mears criterion (Me = 1.47–3.33·10−4 << 0.15), was fast, presenting no limitation to the system productivity, regardless of the presence of water and from 50 to 80 °C. Considering that the enzyme is immobilized in a porous ion-exchange resin, limitations due to internal mass transfer can exist, depending on the values of the effectiveness factor (η). It varied from 0.14 to 0.23 at 50 to 80 °C and 0.32–1 mm particle diameter range in the absence of water, and in the same ranges, from 0.40 to 0.66 in the presence of 7.4% w/w water in the glycerol phase. Thus, it is evident that some limitation occurs due to mass transfer inside the pores, while the presence of water in the polar phase increases the productivity 3–4 fold. During the kinetic study, several kinetic models were proposed for both triphasic reacting systems, with and without first-order biocatalyst deactivation, and their fit to all relevant experimental data led to the observation that the best kinetic model was a reversible hyperbolic model with first-order deactivation in the anhydrous reaction system and a similar model, but without deactivation, for the system with added water at zero time. This fact is in sharp contrast to the use of N435 in a water-glycerol monophasic system, where progressive dissolution of ibuprofen in the reacting media, together with a notable enzyme deactivation, is observed.

Oriented multivalent silaffin-affinity immobilization of recombinant lipase on diatom surface: Reliable loading and high performance of biocatalyst

Microbial lipases are widely used biocatalysts; however, their functional surface immobilization should be designed for successful industrial applications. One of the unmet challenges is to develop a practical surface immobilization to achieve both high stability and activity of lipases upon the large loading. Herein, we present a silaffin-based multivalent design as a simple and oriented approach for Bacillus subtilis lipase A (LipA) immobilization on economic diatom biosilica matrix to yield highly-stable activity with reliable loading. Specifically, silaffin peptides Sil3H, Sil3K, and Sil3R, as monovalent or divalent genetic fusion tags, selectively immobilized LipA on biosilica surfaces. Sil3K peptide fusion to LipA termini most efficiently produced high catalytic activity upon immobilization. The activity was 70-fold greater than that of immobilized wild-type LipA. Compared to single fusion, the double Sil3K fusion displayed 1.7 higher enzymatic loading combined with high catalytic performances of LipA on biosilica surfaces. The multivalent immobilized LipA was distributed uniformly on biosilica surfaces. The biocatalyst was stable over a wide pH range with 98% retention activity after 10 reuses. The stabilized lipase fusion was compatible with laundry detergents, making it an attractive biocatalyst for detergent formulations. These findings demonstrate that multivalent surface immobilization is a plausible method for developing high-performance biocatalysts suitable for industrial biotechnological applications.

Improved catalytic properties of Candida antarctica lipase B immobilized on cetyl chloroformate-modified cellulose nanocrystals

The catalytic activity of Candida antarctica lipase B (CALB) immobilized on modified cellulose nanocrystals (CNC) with different hydrophobicity was investigated using experimental and theoretical approaches. Firstly, the modified CNC were characterized by multi-spectroscopic methods, water contact angle, scanning electron microscopy and thermogravimetric analysis. Moderately hydrophobic CNC were found to be an optimal support for CALB immobilization. Secondly, model systems contained a CALB molecule and different numbers of modified CNC molecules (CALB@3CNC-C16, CALB@10CNC-C16 and CALB@15CNC-C16) were prepared for molecular dynamics (MD) simulation. Root-mean-square fluctuation values (0.61-2.61 Å) of lid region were relatively high in CALB@10CNC-C16, indicating that modified CNC with moderate hydrophobicity favored forming a lid-open conformation of CALB. Finally, the esterification of oleic acid catalyzed by the immobilized CALB showed higher conversion (54.68 %) than free CALB (12.98 %). Insights into modified CNC with tunable properties provided by this study may be a potential support for improving the catalytic performance of lipases.

The Chemistry and Applications of Metal-Organic Frameworks (MOFs) as Industrial Enzyme Immobilization Systems

Enzymatic biocatalysis is a sustainable technology. Enzymes are versatile and highly efficient biocatalysts, and have been widely employed due to their biodegradable nature. However, because the three-dimensional structure of these enzymes is predominantly maintained by weaker non-covalent interactions, external conditions, such as temperature and pH variations, as well as the presence of chemical compounds, can modify or even neutralize their biological activity. The enablement of this category of processes is the result of the several advances in the areas of molecular biology and biotechnology achieved over the past two decades. In this scenario, metal–organic frameworks (MOFs) are highlighted as efficient supports for enzyme immobilization. They can be used to ‘house’ a specific enzyme, providing it with protection from environmental influences. This review discusses MOFs as structures; emphasizes their synthesis strategies, properties, and applications; explores the existing methods of using immobilization processes of various enzymes; and lists their possible chemical modifications and combinations with other compounds to formulate the ideal supports for a given application.

Immobilized Lipase in Resolution of Ketoprofen Enantiomers: Examination of Biocatalysts Properties and Process Characterization

In this study, lipase from Aspergillus niger immobilized by physical immobilization by the adsorption interactions and partially interfacial activation and mixed physical immobilization via interfacial activation and ion exchange was used in the kinetic resolution of the ketoprofen racemic mixture. The FTIR spectra of samples after immobilization of enzyme-characteristic signals can be seen, and an increase in particle size diameters upon immobilization is observed, indicating efficient immobilization. The immobilization yield was on the level of 93% and 86% for immobilization unmodified and modified support, respectively, whereas activity recovery reached around 90% for both systems. The highest activity of immobilized biocatalysts was observed at pH 7 and temperature 40 °C and pH 8 and 20 °C for lipase immobilized by physical immobilization by the adsorption interactions and partially interfacial activation and mixed physical immobilization via interfacial activation and ion exchange, respectively. It was also shown that over a wide range of pH (from 7 to 10) and temperature (from 20 to 60 °C) both immobilized lipases retained over 80% of their relative activity, indicating improvement of enzyme stability. The best solvent during kinetic resolution of enantiomers was found to be phosphate buffer at pH 7, which obtained the highest efficiency of racemic ketoprofen methyl ester resolution at the level of over 51%, followed by enantiomeric excess 99.85% in the presence of biocatalyst obtained by physical immobilization by the adsorption interactions and partially interfacial activation.

Advances in the application of immobilized enzyme for the remediation of hazardous pollutant: A review

Nowadays, ecofriendly, low-cost, and sustainable alternatives techniques have been focused on the effective removal of hazardous pollutants from the water streams. In this context, enzyme immobilization seems to be of specific interest to several researchers to develop novel, effective, greener, and hybrid strategies for the removal of toxic contaminants. Immobilization is a biotechnological tool, anchoring the enzymes on support material to enhance the stability and retain the structural conformation of enzymes for catalysis. Recyclability and reusability are the main merits of immobilized enzymes over free enzymes. Studies showed that immobilized enzyme laccase can be used up to 7 cycles with 66% efficiency, peroxidase can be recycled to 2 cycles with 50% efficiency, and also cellulase to 3 cycles with 91% efficiency. In this review, basic concepts of immobilization, different immobilization techniques, and carriers used for immobilization are summarized. In addition to that, the potential of immobilized enzymes as the bioremediation agents for the effective degradation of pollutants from the contaminated zone and the impact of different operating parameters are summarized in-depth. Further, this review provides future trends and challenges that have to be solved shortly for enhancing the potential of immobilized systems for large-scale industrial wastewater treatment.

Producing Natural Flavours from Isoamyl Alcohol and Fusel Oil by Using Immobilised Rhizopus oryzae Lipase

Enzymatic synthesis of short-chain esters (flavours) might enable their labelling as natural, increasing their value. Covalently immobilised Rhizopus oryzae lipase (EO-proROL) was used to synthesise isoamyl butyrate and acetate. In cyclohexane, the best performer reaction solvent, 1.8 times higher yield of isoamyl butyrate (ca. 100%) than isoamyl acetate (ca. 55%) was obtained. Optimum initial acid concentration (410 mM) and acid:alcohol mole ratio (0.5) were established by a central composite rotatable design to maximise isoamyl butyrate single-batch and cumulative production with reused enzyme. These conditions were used to scale up the esterification (150 mL) and to assess yield, initial esterification rate, productivity and enzyme operational stability. Commercial isoamyl alcohol and fusel oil results were found to be similar as regards yield (91% vs. 84%), initial reaction rate (5.4 µM min−1 with both substrates), operational stability (40% activity loss after five runs with both) and productivity (31.09 vs. 28.7 mM h−1). EO-proROL specificity for the structural isomers of isoamyl alcohol was also evaluated. Thus, a successful biocatalyst and product conditions ready to be used for isoamyl ester industrial production are here proposed.

Decyl esters production from soybean-based oils catalyzed by lipase immobilized on differently functionalized rice husk silica and their characterization as potential biolubricants

This study aimed the enzymatic decyl esters production by hydroesterification, a two-step process consisting of hydrolysis of refined soybean (RSBO) or used soybean cooking (USCO) oils to produce free fatty acids (FFA) and further esterification of purified FFA. Using free lipase from Candida rugosa (CRL), about 98% hydrolyses for both oils have been observed after 180 min of reaction using a CRL loading of 50 U g-1 of reaction mixture, 40 °C, and a mechanical stirring of 1500 rpm. FFA esterification with decanol in solvent-free systems was performed using lipase from Thermomyces lanuginosus (TLL) immobilized by physical adsorption on silica particles extracted from rice husk, an agricultural waste. For such purpose, non-functionalized (SiO2) or functionalized rice husk silica bearing octyl (Octyl-SiO2) or phenyl (Phe-SiO2) groups have been used as immobilization supports. Protein amounts between 22 and 28 mg g-1 of support were observed. When used in the esterification, they enabled a FFA conversion of 81.3-87.6% after 90-300 min of reaction. Lipozyme TL IM, a commercial immobilized TLL, exhibited similar performance compared to TLL-Octyl-SiO2 (FFA conversion ≈90% after 90-120 min of reaction). However, high operational stability after fifteen successive esterification batches was observed only for TLL immobilized on Octyl-SiO2 (activity retention of ≈90% using both FFA sources). The produced decyl esters presented good characteristics as potential biolubricants according to standard methods (ASTM) and thermal analysis.

Chemical modification of lipases: A powerful tool for activity improvement

The demand for adequate and ecologically acceptable procedures to produce the most differentiated products has been growing in recent decades, with enzymes being excellent examples of the advances achieved so far. Lipases are astonishing catalysts with a vast range of applications including the synthesis of esters, flavours, biodiesel, and polymers. The broad specificity of the substrates, as well as the regio-, stereo-, and enantioselectivity, are the differentiating factors of these enzymes. Structural modification is a current approach to enhance the activity of lipases. Chemical modification of lipases to improve catalytic performance is of great interest considering the increasingly broad fields of application. Together with the physical immobilization onto solid supports, different strategies have been developed to produce catalysts with higher activity and stability. In this review, practical insights into the different strategies developed in recent years regarding the modification of lipases are described. For the first time, the impact of the modifications on the activity and stability of lipases, as well as on the biotechnological applications, is fully compiled. This article is protected by copyright. All rights reserved.

Current Trends in Acetins Production: Green versus Non-Green Synthesis

To utilize excess glycerol produced from the biodiesel industry, researchers are developing innovative methods of transforming glycerol into value-added chemicals. One strategy adopted is the conversion of glycerol into acetins, which are esters of glycerol that have wide applications in cosmetics, pharmaceuticals, food and fuel additives, and plasticizers and serve as precursors for other chemical compounds. Acetins are synthesized either by traditional chemical methods or by biological processes. Although the chemical methods are efficient, productive, and commercialized, they are "non-green", meaning that they are unsafe for the environment and consumers. On the other hand, the biological process is "green" in the sense that it protects both the environment and consumers. It is, however, less productive and requires further effort to achieve commercialization. Thus, both methodologies have benefits and drawbacks, and this study aims to present and discuss these. In addition, we briefly discuss general strategies for optimizing biological processes that could apply to acetins production on an industrial scale.