A review on the synthesis of graft copolymers of chitosan and their potential applications

Flexible chitosan-graphene oxide-based biomacroporous cryogel via grafting cryopolymerization for selective recovery of myricetin from food sample

Myricetin has a significant role in pharmacology, specifically in traditional Chinese medicine. The most intriguing pharmacological action of myricetin consists of its multi-pathway anticancer effects. Therefore, rapid and selective isolation of myricetin from garlic and apple juices has notable pharmacological benefits. Chitosan-graphene oxide-based biomacroporous cryogel are highly efficient and environmentally friendly materials for adsorption. The current study involved the synthesis of chitosan-graphene oxide-based biomacroporous cryogel sorbent for the selective recovery of myricetin. The characterization investigation utilizing SEM, XRD, EDS and FTIR demonstrated the successful synthesis of a chitosan-graphene oxide-based biomacroporous cryogel. Additionally, XPS effectively revealed the interaction of functional groups on the biomacroporous cryogel sorbent with myricetin. The maximum adsorption capacity for myricetin, under optimized conditions, was 167 mg g-1 in 60 min. The equilibrium adsorption capacity was achieved at neutral pH with optimal parameters, and the Freundlich isotherm model was followed. The pseudo-second-order model presented better descriptions of the adsorption process. In addition, the chitosan-graphene oxide-based biomacroporous cryogel exhibited remarkable selectivity: due to involvement of two primary factors: the number of hydroxyl-groups and the fact that the extra hydroxyl group at position 5' in ring B allows for a more noticeable transfer of the unshared electron pair from oxygen to the π system of the B ring. The adsorption of myricetin decreases to 2 % after three consecutive cycles, indicating the significant reusability of chitosan-graphene oxide-based biomacroporous cryogel. Additionally, the chitosan-graphene oxide based-biomacroporous cryogel that was produced has been utilized after one month and shown a comprehensive shelf-life. Typical adsorption mechanisms include hydrogen bonding and demonstrates significant potential for the efficient and specific isolation of myricetin in complex mixtures. Furthermore, the chitosan-graphene oxide-based biomacroporous cryogel demonstrated a significant rise in recovery of myricetin flavonoid in real samples of garlic and apple juices, rising from 99.66 % to 114.29 %.

Design and theoretical calculation of chitosan derivatives: Amphiphilic chitosan micelles loaded with Chinese fir essential oil

The unique structure of chitosan-based micelles can be loaded with essential oil, so it is significant to study the modification of chitosan and the interactions between chitosan and essential oil, while molecular dynamics (MD) simulation and density functional theory (DFT) provide a solution. In this study, three kinds of amphiphilic chitosan derivatives (CSDs) were constructed by grafting of different hydrophilic and hydrophobic groups. Amphiphilic chitosan micelles loaded with Chinese fir essential oil (CFEO) were prepared by self-assembly. The aggregation behavior of CFEO component (cedrol and α-cedrene) in the solutions of chitosan and three CSDs were simulated using MD, and the mean square displacement was calculated. DFT analyzed the mechanism for regulating the molecular properties of CSDs by different modification methods, and explored the intensity and type of interaction force between cedrol/α-cedrene and three CSDs. The results show that cedrol and α-cedrene were more easily aggregated near the modified CSDs, with CS-g-PLA showing the strongest trapping ability. The grafting of polylactic acid on chitosan resulted in a significant decrease in HOMO-LUMO energy gap and an increase in reactivity activity. Widely distributed hydrogen bonding and van der Waals forces were confirmed to be the key to enhanced loading capacity.

Functionalization of chitosan and its application in flame retardant: A review

In recent years, bio-based flame retardants have gained significant attention as sustainable alternatives, achieving important breakthroughs in flame retardancy and becoming a key focus for future development. Derived from biomass, chitosan (CS) has been widely used in the field of advanced functional materials. However, in the field of flame retardancy, chitosan alone shows limited effectiveness, leading researchers to explore its reactive functional groups for creating multifunctional flame retardant chitosan composites (FRCC). This review examines FRCC modifications, focusing on how physical and chemical techniques enhance flame retardancy based on combustion mechanisms. Particular emphasis is placed on the impact of embedding flame-retardant elements. Additionally, this paper outlines FRCC performance characteristics, addressing operational requirements in varied environments, and discusses key challenges. This study offers researchers a comprehensive overview of FRCC, serving as a valuable resource for ongoing research and development.

Surface Hydrophilic Modification of Polypropylene by Nanosecond Pulsed Ar/O2 Dielectric Barrier Discharge

Polypropylene (PP) membranes have found diverse applications, such as in wastewater treatment, lithium-ion batteries, and pharmaceuticals, due to their low cost, excellent mechanical properties, thermal stability, and chemical resistance. However, the intrinsic hydrophobicity of PP materials leads to membrane fouling and filtration flux reduction, which greatly hinders the applications of PP membranes. Dielectric barrier discharge (DBD) is an effective technique for surface modification of materials because it generates a large area of low-temperature plasma at atmospheric pressure. In this study, O2 was added to nanosecond pulsed Ar DBD to increase its reactivity. Electrical and optical diagnostic techniques were used to study the discharge characteristics of the DBD at varying O2 contents. The uniformity of the discharge was quantitatively analyzed using the observed discharge images. Water contact angle measurements were used to assess the surface hydrophilicity of polypropylene. The surface morphology and chemical composition of the PP materials before and after treatment were analyzed using field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The results show that the moderate addition of O2 enhances surface hydrophilicity and the uniformity of the modification. By increasing the O2 addition from 0% to 0.1%, the average power increased from 4.19 W to 5.79 W, and the energy efficiency increased from 17.78% to 21.51%. The water contact angle of the DBD-treated PP showed a tendency to decrease and then increase with increasing O2 content, with the optimum O2 addition determined to be 0.1%. Under this condition, the water contact angle of the PP surface decreased by 31.88°, which is 52.31% lower than the untreated surface. O2 increases the number of oxygen-containing polar groups (-OH, C=O, and O-C=O) on the surface of the material, and deepens and densifies the grooves on the surface of the PP material, resulting in an increase in the hydrophilicity of the PP surface.

Valorization of fishery industry waste: Chitosan extraction and its application in the industry

Waste from the fishing industry is disposed of in soils and oceans, causing environmental damage. However, it is also a source of valuable compounds such as chitin. Although chitin is the second most abundant polymer in nature, its use in industry is limited due to the lack of standardized and scalable extraction methods and its poor solubility. The deacetylation process increases its potential applications by enabling the recovery of chitosan, which is soluble in dilute acidic solutions. Chitosan is a polymer of great importance due to its biocompatible and bioactive properties, which include antimicrobial and antioxidant capabilities. Chitin extraction and its deacetylation to obtain chitosan are typically performed using chemical processes that involve large amounts of strongly acidic and alkaline solutions. To reduce the environmental impact of this process, extraction methods based on biotechnological tools, such as fermentation and chitin deacetylase, as well as emerging technologies, have been proposed. These extraction methods have demonstrated the potential to reduce or even avoid using strong solvents and shorten extraction time, thereby reducing costs. Nevertheless, it is important to address existing gaps in this area, such as the requirements for large-scale implementation and the determination of the stoichiometric ratios for each process. This review highlights the use of biotechnological tools and emerging technologies for chitin extraction and chitosan production. These approaches truly minimize environmental impact, reduce the use of strong solvents, and shorten extraction time. They are a reliable alternative to fishery waste valorization, lowering costs; however, addressing the critical gaps for their large-scale implementation remains challenging.

Improving the physicochemical quality and oxidative stability of deep-fried pork meatballs by coating with chitosan grafted gallic acid

The objective of this research was to examine the effectiveness of chitosan (CH)-gallic acid (GA) conjugate (CH-g-GA) as an edible coating in improving the physicochemical properties and oxidative stability of deep-fat fried pork meatballs. The meatballs were coated with either CH alone, a combination of CH and GA, or CH-g-GA before being fried at 180 °C for 5 min. The viscosity of the coating solutions influenced the amount of coating picked up by the meatballs, with higher viscosity coatings showing increased pickup. The application of chitosan-based coatings in deep-fried meatballs resulted in a decrease in moisture loss and oil uptake, as well as decreased b* values and hardness, while maintaining consistent cooking yield. Furthermore, compared to the control group, the chitosan-based coatings treatment significantly increased the ratio of immobilized water and decreased the ratio of free water (P < 0.05), as well as effectively inhibited lipid oxidation in deep-fried meatballs (P < 0.05). Among the different coatings tested, CH-g-GA coating exhibited the highest effectiveness. The research findings suggest that the CH-g-GA edible coating has significant potential in enhancing the overall quality of deep-fried meatballs.

Gamma irradiation green synthesis of (polyacrylamide/chitosan/silver nanoparticles) hydrogel nanocomposites and their using as antifungal against Candida albicans and anti-cancer modulator

Silver nanoparticles-loaded hydrogel nanocomposites are exploited for medicinal and pharmaceutical applications. Hydrogel nanocomposites were prepared from acrylamide (Am), chitosan (CS) and AgNO3 utilizing gamma rays. Diverse variables were applied in preparation of silver nanoparticles-laoded hydrogel nanocomposites of (PAm/CS)-AgNPs such as influence of radiation dose and influnece of CS concentration. Diverse techniques were utilized to characterize hydrogel nanocomposites; Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) and scanning electron microscopy (SEM). Results confirmed formation of silver nanoparticles-loaded hydrogel nanocomposites of (PAm/CS)-AgNPs. Antifungal activity of (PAm/CS)-AgNPs hydrogel nanocomposites on viability of C. albicans was esitmated. Results displayed the efficient microbial inhibition activity of treatment against C. albicans compared to control. Furthermore, (PAm/CS)-AgNPs hydrogel nanocomposite against cervical cancer HeLa cell line was investigated. Cytotoxicity of (PAm/CS)-AgNPs hydrogel nanocomposites on prior cancer cell line empolyed to prohibition of cell growth assesssed by MTT test. HeLa cancer cell is treated by (PAm/CS)-AgNPs for 48 h exposed a potential apoptotic activity by noticeable up-regulation of p53 gene expression. Moreover, anticancer activity was investigated by down-regulation of platelet-based growth variable receptor beta (PDGFR-β), Bcl2, Cathepsine, and MMP-2 gene expression. antioxidant activity was investigated and results showed antioxidant activity of (PAm/CS) hydrogel and (PAm/CS)-AgNPs hydrogel nanocomposite are 87.8% and 62.9%, respectively.

Investigation on novel chitin and chitosan from dung beetle Heteronitis castelnaui (Harold, 1865) and its potential application for organic dyes removal from aqueous solution

Chitosan, a natural polysaccharide, has attracted considerable attention as an environmentally friendly and highly efficient adsorbent for dye removal. It is usually produced by deacetylation or partial deacetylation of chitin. However, conventional sources of chitin and chitosan are limited, prompting the need for alternative sources with improved adsorption capabilities. Herein, this study focuses on exploring a novel chitin and chitosan source derived from the dung beetle and evaluates its potential for organic dye removal from aqueous solutions. The research involves the extraction and characterization of chitin and chitosan from dung beetle Heteronitis castelnaui (Harold, 1865) using various analytical techniques, including SEM, FT-IR, TGA, XRD, NMR, deacetylation degree and elemental analysis. The chitosan obtained was used for the formation of hydrogels with sodium alginate via cross-linking with calcium chloride. And then the prepared hydrogels were evaluated for its adsorption capacity through batch adsorption experiments using methylene blue as a model pollutant. The adsorption capacity for methylene blue was 1294.3 mg/g at room temperature with solution pH = 12, MB concentration of 1800 mg/L. Furthermore, the kinetics of the adsorption process were analyzed using pseudo-first-order and pseudo-second-order models to understand the rate of adsorption. The maximum adsorption capacities were determined using Langmuir and Freundlich isotherm models. This study provides valuable insights for the development of sustainable dye adsorption technologies, specifically investigating a novel chitosan source derived from the dung beetle.

Dynamic Cross-Linking, Self-Healing, Antibacterial Hydrogel for Regenerating Irregular Cranial Bone Defects

Given the widespread clinical demand, addressing irregular cranial bone defects poses a significant challenge following surgical procedures and traumatic events. In situ-formed injectable hydrogels are attractive for irregular bone defects due to their ease of administration and the ability to incorporate ceramics, ions, and proteins into the hydrogel. In this study, a multifunctional hydrogel composed of oxidized sodium alginate (OSA)-grafted dopamine (DO), carboxymethyl chitosan (CMCS), calcium ions (Ca2+), nanohydroxyapatite (nHA), and magnesium oxide (MgO) (DOCMCHM) was prepared to address irregular cranial bone defects via dynamic Schiff base and chelation reactions. DOCMCHM hydrogel exhibits strong adhesion to wet tissues, self-healing properties, and antibacterial characteristics. Biological evaluations indicate that DOCMCHM hydrogel has good biocompatibility, in vivo degradability, and the ability to promote cell proliferation. Importantly, DOCMCHM hydrogel, containing MgO, promotes the expression of osteogenic protein markers COL-1, OCN, and RUNX2, and stimulates the formation of new blood vessels by upregulating CD31. This study could provide meaningful insights into ion therapy for the repair of cranial bone defects.

Preparation of graft copolymer of chitosan-poly ortho-toluidine for antibacterial properties

The combination polymers or copolymers have new and combined properties and increase the efficiency of the new polymer. Biopolymers are biodegradable and can play the role of biocompatible and biodegradable in composite polymers. Therefore, poly ortho-toluidine was grafted on chitosan (Cs-g-POT) by chemical and electrochemical polymerization methods. Cs-g-POT was characterized by FTIR, UV-visible, and 1H NMR spectroscopy techniques. The thermal behaviors of the copolymer were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The images of the surface of the copolymer obtained from imaging SEM confirm the successful attachment of POT on chitosan and indicate that the graft polymerization has been successfully performed with both methods. The percentage and efficiency of engraftment were carefully measured and reported. The electrical conductivity of Cs-g-POT was measured by the four-point method and the conductivity was 9.1 × 10-4 S/cm. The copolymer's antibacterial property was studied on Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa as a common bacterium in skin wounds. These studies were investigated using the disk diffusion and minimum inhibitory concentration (MIC) methods. In all tested concentrations the polymer could inhibit the growth of E. coli and P. aeruginosa significantly. However, it inhibited the growth of S. aureus in concentrations above 1 μg. Bacteria are adsorbed on the surface of the polymer by polar-polar and Van Der Waals interactions, where they undergo cell lysis by dopant and electron transfer, and eventually bacterial cell death. Due to its scaffolding properties, this polymer will have a very good use in tissue and bone repair as well as anti-cancer drugs.

Citrus flavonoids-loaded chitosan derivatives-route nanofilm as drug delivery systems for cutaneous wound healing

This study focuses on creating new forms of biomimetic nanofiber composites by combining copolymerizing and electrospinning approaches in the field of nanomedicine. The process involved utilizing the melt polymerization of proline (Pr) and hydroxyl proline (Hyp) to synthesize polymers based on Pr (PPE) and Hyp (PHPE). These polymers were then used in a grafting copolymerization process with chitosan (CS) to produce PHPC (1560 ± 81.08 KDa). A novel electrospun nanofiber scaffold was then produced using PHPC and/or CS, hyaluronic acid, polyvinyl alcohol, and naringenin (NR) as a loading drug. Finally, Mouse Dermal Fibroblast (MDF) cells were introduced to the wound dressing and assessed their therapeutic potential for wound healing in rats. The scaffolds were characterized by FTIR, NMR, DSC, and SEM analysis, which confirmed the amino acid grafting, loading drug, and porous and nanofibrous structures (>225 nm). The results showed that the PHPC-based scaffolds were more effective for swelling/absorption of wound secretions, had more elasticity/elongation, faster drug release, more MDF-cytocompatibility, and antibacterial activity against multidrug-resistant S. aureus compared to CS-based scaffolds. The in vivo studies showed that NR in combination with MDF can accelerate cell migration/proliferation, and remodeling phases of wound healing in both PHPC/CS-based scaffolds. Moreover, PHPC-based scaffolds promote collagen content, and better wound contraction, epithelialization, and neovascularization than CS-based, showing potential as wound-dressing.

Synthesis of Thermoresponsive Chitosan-graft-Poly(N-isopropylacrylamide) Hybrid Copolymer and Its Complexation with DNA

A hybrid synthetic-natural, thermoresponsive graft copolymer composed of poly(N-isopropyl acrylamide) (PNIPAM) side chains, prepared via RAFT polymerization, and a chitosan (Chit) polysaccharide backbone, was synthesized via radical addition-fragmentation reactions using the "grafting to" technique, in aqueous solution. ATR-FTIR, TGA, polyelectrolyte titrations and 1H NMR spectroscopy were employed in order to validate the Chit-g-PNIPAM copolymer chemical structure. Additionally, 1H NMR spectra and back conductometric titration were utilized to quantify the content of grafted PNIPAM side chains. The resulting graft copolymer contains dual functionality, namely both pH responsive free amino groups, with electrostatic complexation/coordination properties, and thermoresponsive PNIPAM side chains. Particle size measurements via dynamic light scattering (DLS) were used to study the thermoresponsive behavior of the Chit-g-PNIPAM copolymer. Thermal properties examined by TGA showed that, by the grafting modification with PNIPAM, the Chit structure became more thermally stable. The lower critical solution temperature (LCST) of the copolymer solution was determined by DLS measurements at 25-45 °C. Furthermore, dynamic and electrophoretic light scattering measurements demonstrated that the Chit-g-PNIPAM thermoresponsive copolymer is suitable of binding DNA molecules and forms nanosized polyplexes at different amino to phosphate groups ratios, with potential application as gene delivery systems.

Synthesis and characterization of pH-sensitive nanocarrier based chitosan-g-poly(itaconic acid) for ciprofloxacin delivery for anti-bacterial application

This study aims to develop pH-sensitive and controlled release of ciprofloxacin from ciprofloxacin-loaded grafted chitosan-coated zinc oxide nanoparticles (Cip@Gchit/Zn-NPs) for the treatment of bacterial infections in the human colon. For this aim, first, the chitosan-g-poly(itaconic acid) [Chit-g-poly (Itac)] was synthesized via grafting of itaconic acid onto chitosan in the presence of cerium ammonium nitrate (CAN) under an inert atmosphere using conventional methods, while zinc oxide nanoparticles (Zn-NPs) were prepared via sol-gel technique. Characterization of the synthesized Cip@Gchit/Zn-NPs was analyzed using XRD, FT-IR, SEM, TGA, and zeta potential analysis. The antibacterial efficacy of Cip@Gchit/Zn-NPs against three pathogenic bacteria, namely Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus, was superior to that of tetracycline reference drugs, as evidenced by larger inhibition zones. Cytotoxicity assessment of Cip@Gchit/Zn-NPs on the human chondrocyte cell line C28/I2 via MTT assay revealed 100 % cell viability at a concentration of 500 μg/mL. The loading efficiency of ciprofloxacin into Gchit/Zn-NPs was evaluated at various ratios, demonstrating lower loading efficiency; however, sustained release of ciprofloxacin from Cip@Gchit/Zn-NPs was excellent, with 98.13 % release observed at pH 7.2 over 10 h. Kinetic analysis of ciprofloxacin release followed the first-order kinetic models.

Advanced Triboelectric Applications of Biomass-Derived Materials: A Comprehensive Review

The utilization of triboelectric materials has gained considerable attention in recent years, offering a sustainable approach to energy harvesting and sensing technologies. Biomass-derived materials, owing to their abundance, renewability, and biocompatibility, offer promising avenues for enhancing the performance and versatility of triboelectric devices. This paper explores the synthesis and characterization of biomass-derived materials, their integration into triboelectric nanogenerators (TENGs), and their applications in energy harvesting, self-powered sensors, and environmental monitoring. This review presents an overview of the emerging field of advanced triboelectric applications that utilize the unique properties of biomass-derived materials. Additionally, it addresses the challenges and opportunities in employing biomass-derived materials for triboelectric applications, emphasizing the potential for sustainable and eco-friendly energy solutions.

Using RAFT Polymerization Methodologies to Create Branched and Nanogel-Type Copolymers

This review aims to highlight the most recent advances in the field of the synthesis of branched copolymers and nanogels using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is a reversible deactivation radical polymerization technique (RDRP) that has gained tremendous attention due to its versatility, compatibility with a plethora of functional monomers, and mild polymerization conditions. These parameters lead to final polymers with good control over the molar mass and narrow molar mass distributions. Branched polymers can be defined as the incorporation of secondary polymer chains to a primary backbone, resulting in a wide range of complex macromolecular architectures, like star-shaped, graft, and hyperbranched polymers and nanogels. These subcategories will be discussed in detail in this review in terms of synthesis routes and properties, mainly in solutions.

Pharmaceutical Applications of Biomass Polymers: Review of Current Research and Perspectives

Polymers derived from natural biomass have emerged as a valuable resource in the field of biomedicine due to their versatility. Polysaccharides, peptides, proteins, and lignin have demonstrated promising results in various applications, including drug delivery design. However, several challenges need to be addressed to realize the full potential of these polymers. The current paper provides a comprehensive overview of the latest research and perspectives in this area, with a particular focus on developing effective methods and efficient drug delivery systems. This review aims to offer insights into the opportunities and challenges associated with the use of natural polymers in biomedicine and to provide a roadmap for future research in this field.

Bactericidal Chitosan Derivatives and Their Superabsorbent Blends with ĸ-Carrageenan

The aim of this work is research dedicated to the search for new bactericidal systems for use in cosmetic formulations, dermocosmetics, or the production of wound dressings. Over the last two decades, chitosan, due to its special biological activity, has become a highly indispensable biopolymer with very wide application possibilities. Reports in the literature on the antibacterial effects of chitosan are very diverse, but our research has shown that they can be successfully improved through chemical modification. Therefore, in this study, results on the synthesis of new chitosan-based Schiff bases, dCsSB-SFD and dCsSB-PCA, are obtained using two aldehydes: sodium 4-formylbenzene-1,3-disulfonate (SFD) and 2-pyridine carboxaldehyde (PCA), respectively. Chitosan derivatives synthesized in this way demonstrate stronger antimicrobial activity. Carrying out the procedure of grafting chitosan with a caproyl chain allowed obtaining compatible blends of chitosan derivatives with κ-carrageenan, which are stable hydrogels with a high swelling coefficient. Furthermore, the covalently bounded poly(ε-caprolactone) (PCL) chain improved the solubility of obtained polymers in organic solvents. In this respect, the Schiff base-containing polymers obtained in this study, with special hydrogel and antimicrobial properties, are very promising materials for potential use as a controlled-release formulation of both hydrophilic and hydrophobic drugs in cosmetic products for skin health.

Natural Polysaccharide-Based Hydrogels Used for Dye Removal

Removal of contaminants from discharge water is vital and demands urgent assistance with the goal to keep clean water. Adsorption is one of the most common, efficient, and low-priced methods used in water treatment. Various polysaccharide-based gels have been used as efficient dye adsorbents from wastewater. This review summarizes cutting-edge research of the last decade of different hydrogels based on natural polysaccharides (chitin, chitosan, cellulose, starch, pullulan, and dextran) concerning their dye adsorption efficiency. Beyond their natural abundance, attributes of polysaccharides such as biocompatibility, biodegradability, and low cost make them not only efficient, but also environmentally sustainable candidates for water purification. The synthesis and dye removal performance together with the effect of diverse factors on gels retaining ability, kinetic, and isotherm models encountered in adsorption studies, are introduced. Thermodynamic parameters, sorbent recycling capacity along with conclusions and future prospects are also presented.

Construction of phenolic acids grafted chitosan bioactive microspheres to reduce oxidation and iron absorption in meat digestion

Although iron in meat is an important trace element for human diet, its presence also induces postprandial oxidative stress and aggravates the condition of patients with iron overload. To overcome this situation, a type of new tunable Fe-absorption bioactive materials was constructed in this study. First, four phenolic acids (Caffeic acid, Gallic acid, Protocatechuic acid, Chlorogenic acid) were grafted onto chitosan. Then, the copolymers were prepared into micron-level microspheres by emulsification method, which were characterized in adsorption isotherms (Langmuir model), swelling behavior and digestion characteristics. In order to verify the practical application effect of microspheres, Protocatechuic acid grafted chitosan microspheres as the representative were used in sirloin powder to observe their effects in vitro digestion and rat experiment. In the present study, microspheres were innovatively applied in meat consumption, which significantly inhibited the oxidation of meat in the process of digestion and effectively controlled the iron absorption. These results are expected to play an important role in promoting the healthy consumption of meat around the world, improving gastrointestinal redox status through dietary assistance, and treating diseases related to iron overload.

Review on emerging trends and challenges in the modification of xanthan gum for various applications

This review explores the realm of structural modifications and broad spectrum of their potential applications, with a special focus on the synthesis of xanthan gum derivatives through graft copolymerization methods. It delves into the creation of these derivatives by attaching functional groups (-OH and -COOH) to xanthan gum, utilizing a variety of initiators for grafting, and examining their diverse applications, especially in the areas of food packaging, pharmaceuticals, wastewater treatment, and antimicrobial activities. Xanthan gum is a biocompatible, biodegradable, less toxic, bioactive, and cost-effective natural polymer derived from Xanthomonas species. The native properties of xanthan gum can be improved by cross-linking, grafting, curing, blending, and various modification techniques. Grafted xanthan gum has excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing ability. Owing to its remarkable properties, such as biocompatibility and its ability to form gels resembling the extracellular matrix of tissues, modified xanthan gum finds extensive utility across biomedicine, engineering, and the food industry. Furthermore, the review also covers various modified derivatives of xanthan gum that exhibit excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing abilities. These applications could serve as important resources for a wide range of industries in future product development.

Pyrogallol loaded chitosan-based polymeric hydrogel for controlling Acinetobacter baumannii wound infections: Synthesis, characterization, and topical application

Antibacterial hydrogels have emerged as a promising approach for wound healing, owing to their ability to integrate antibacterial agents into the hydrogel matrix. Benefiting from its remarkable antibacterial and wound-healing attributes, pyrogallol has been introduced into chitosan-gelatin for the inaugural development of an innovative antibacterial polymeric hydrogel tailored for applications in wound healing. Hence, we observed the effectiveness of pyrogallol in inhibiting the growth of A. baumannii, disrupting mature biofilms, and showcasing robust antioxidant activity both in vitro and in vivo. In addition, pyrogallol promoted the migration of human epidermal keratinocytes and exhibited wound healing activity in zebrafish. These findings suggest that pyrogallol holds promise as a therapeutic agent for wound healing. Interestingly, the pyrogallol-loaded chitosan-gelatin (Pyro-CG) hydrogel exhibited enhanced mechanical strength, stability, controlled drug release, biodegradability, antibacterial activity, and biocompatibility. In vivo results established that Pyro-CG hydrogel promotes wound closure and re-epithelialization in A. baumannii-induced wounds in molly fish. Therefore, the prepared Pyro-CG polymeric hydrogel stands poised as a potent and promising agent for wound healing with antibacterial properties. This holds considerable promise for the development of effective therapeutic interventions to address the increasing menace of A. baumannii-induced wound infections.

Harnessing the Potential of Chitosan and Its Derivatives for Enhanced Functionalities in Food Applications

As one of the most abundant natural polysaccharides that possess good biological activity, chitosan is extracted from chitin. Its application in the food field is being increasingly valued. However, chitosan extraction is difficult, and its poor solubility limits its application. At present, the extraction methods include the acid-base method, new chemical methods, and biological methods. The extraction rates of chitin/chitosan are 4-55%, 13-14%, and 15-28%, respectively. Different chemical modifications have different effects on chitosan, making it applicable in different fields. This article reviews and compares the extraction and chemical modification methods of chitosan, emphasizing the importance of green extraction methods. Finally, the application prospects of chitosan in the food industry are discussed. This will promote the understanding of the advantages and disadvantages of different extraction methods for chitosan as well as the relationship between modification and application, providing valuable insights for the future development of chitosan.

An effective method for fabricating crosslinked multilayer biomembranes with excellent stability and methanol resistance

To develop the proton exchange membranes with excellent comprehensive performance, especially high methanol resistance, the multilayer biomembranes were first prepared by alternately depositing chitosan and self-made functionalized organosilane on the surface of crosslinked chitosan via layer-by-layer self-assembly and were further treated via immersing in sulfuric acid and then heating at high temperature. SEM and FTIR spectra confirmed the presence of thin self-assemble layers with good adhesion on the substrate due to the interactions and the condensation reaction. The introduction of self-assemble layers and crosslinked structure significantly improved the stability and methanol resistance of biomembrane. The methanol diffusion coefficient of 15 bilayers modified biomembrane was only 2.6 × 10-8 cm2 S-1 in 12 M methanol, which was very favorable for its application in direct methanol fuel cell with high methanol concentration. Furthermore, the crosslinked multilayer biomembranes exhibited enhanced stability and the functionalized organosilane with high conductive groups ensured the biomembranes with better proton conductivity. The biomembrane with 15 bilayers showed extremely high selectivity value (1.05 × 106 Sscm-3), indicating its attractive potential as proton exchange membrane in direct methanol fuel cell.

Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates

Degradable polymers (both biomacromolecules and several synthetic polymers) for biomedical applications have been promising very much in the recent past due to their low cost, biocompatibility, flexibility, and minimal side effects. Here, we present an overview with updated information on natural and synthetic degradable polymers where a brief account on different polysaccharides, proteins, and synthetic polymers viz. polyesters/polyamino acids/polyanhydrides/polyphosphazenes/polyurethanes relevant to biomedical applications has been provided. The various approaches for the transformation of these polymers by physical/chemical means viz. cross-linking, as polyblends, nanocomposites/hybrid composites, interpenetrating complexes, interpolymer/polyion complexes, functionalization, polymer conjugates, and block and graft copolymers, are described. The degradation mechanism, drug loading profiles, and toxicological aspects of polymeric nanoparticles formed are also defined. Biomedical applications of these degradable polymer-based biomaterials in and as wound dressing/healing, biosensors, drug delivery systems, tissue engineering, and regenerative medicine, etc., are highlighted. In addition, the use of such nano systems to solve current drug delivery problems is briefly reviewed.

Synthesis of flaxseed gum/melanin-based scaffold: A novel approach for nano-encapsulation of doxorubicin with enhanced anticancer activity

Doxorubicin is a powerful chemotherapy medicine that is frequently used to treat cancer, but because of its extremely destructive side effects on other healthy cells, its applications have been severely constrained. With the aim of using lower therapeutic doses of doxorubicin while maintaining the same anti-cancerous activity as those of higher doses, the present study designs nano-encapsulation of doxorubicin by acrylamide grafted melanin as core and acrylic acid grafted flax seed gum as shell (DOX@AAM-g-ML/AA-g-FSG-NPs) for studies in-vivo and in-vitro anticancer activity. For biological studies, the cytotoxicity of DOX@AAM-g-ML/AA-g-FSG-NPs was examined on a cancerous human cell line (HCT-15) and it was observed that DOX@AAM-g-ML/AA-g-FSG-NPs exhibited very high toxicity towards HCT-15. In-vivo investigation in colon cancer-inflicted rat model also showed that DOX@AAM-g-ML/AA-g-FSG-NPs showed better anticancer activity against cancerous cells as compared to free doxorubicin. The drug release behavior of DOX@GML-GFS-NPs was studied at several pH and maximum drug release (95 %) was recorded at pH -7.2, and kinetic data of drug release was follows the Higuchi (R2 = 0.9706) kinetic model. Our study is focussed on reducing the side effects of doxorubicin by its nano-encapsulation in acrylamide grafted melanin as core and acrylic acid grafted flax seed gum that will also enhance its efficiency.

Mechanisms of hydrogel-based microRNA delivery systems and its application strategies in targeting inflammatory diseases

Hydrogels, composed of three-dimensional polymer networks, are excellent delivery carriers and have been extensively employed in the biomedical field. Inflammation acts as a protective mechanism to prevent harmful substances from entering living organisms, but chronic, long-lasting inflammation can cause oxidative stress, which damages tissue and organs and adversely affects patients' quality of life. The aberrant expression of microRNAs (miRNAs) has been found to play a significant part in the etiology and progression of inflammatory diseases, as suggested by growing evidence. Numerous hydrogels that can act as gene carriers for the intracellular delivery of miRNA have been described during ongoing research into innovative hydrogel materials. MiRNA hydrogel delivery systems, which are loaded with exogenous miRNA inhibitors or mimics, enable targeted miRNA intervention in inflammatory diseases and effectively prevent environmental stressors from degrading or inactivating miRNA. In this review, we summarize the classification of miRNA hydrogel delivery systems, the basic strategies and mechanisms for loading miRNAs into hydrogels, highlight the biomedical applications of miRNA hydrogel delivery systems in inflammatory diseases, and share our viewpoints on potential opportunities and challenges in the promising region of miRNA delivery systems. These findings may provide a new theoretical basis for the prevention and treatment of inflammation-related diseases and lay the foundation for clinical translation.

Introducing the grafted poly(acrylic acid-co-butyl acrylate) branches onto biological corn starch macromolecule for imparting it with superior sizing properties

The objective of this study was to survey the influence of poly(acrylic acid-co-butyl acrylate) [P(AA-co-BA)] branches on the sizing properties (i.e., paste stability, adhesion, properties of film and sized warps) of biological macromolecule (corn starch) for further promoting the properties of bromoisobutyryl esterified starch (BBES) and developing a new biobased sizing agent [BBES-g-P(AA-co-BA)]. The sizing properties of BBES-g-P(AA-co-BA) were estimated in comparison with acid-hydrolyzed starch (AHS) and BBES. Compared with the two starches, BBES-g-P(AA-co-BA) displayed higher paste stability, bonding forces to both polyester and polyester/cotton roving, film elongation and water solubility, as well as lower film strength. And the increased grafting ratio exhibited positive effects on these properties of BBES-g-P(AA-co-BA). The properties containing increase in strength, loss in extension, abrasion resistance and hairiness of polyester and polyester/cotton blended yarns sized with BBES-g-P(AA-co-BA), were superior to those sized with AHS and BBES, respectively, indicating that the incorporation of P(AA-co-BA) branches onto BBES could further promote the sizing qualities of both yarns. The BBES-g-P(AA-co-BA) with a grafting ratio of 16.51 % was concluded to size both yarns for improvement of yarn quality.

Recent Advances in the Carotenoids Added to Food Packaging Films: A Review

Food spoilage is one of the key concerns in the food industry. One approach is the improvement of the shelf life of the food by introducing active packaging, and another is intelligent packaging. Detecting packed food spoilage in real-time is key to stopping outbreaks caused by food-borne diseases. Using active materials in packaging can improve shelf life, while the nonharmful color indicator can be useful to trace the quality of the food through simple color detection. Recently, bio-derived active and intelligent packaging has gained a lot of interest from researchers and consumers. For this, the biopolymers and the bioactive natural ingredient are used as indicators to fabricate active packaging material and color-changing sensors that can improve the shelf life and detect the freshness of food in real-time, respectively. Among natural bioactive components, carotenoids are known for their good antimicrobial, antioxidant, and pH-responsive color-indicating properties. Carotenoids are rich in fruits and vegetables and fat-soluble pigments. Including carotenoids in the packaging system improves the film's physical and functional performance. The recent progress on carotenoid pigment-based packaging (active and intelligent) is discussed in this review. The sources and biological activity of the carotenoids are briefly discussed, and then the fabrication and application of carotenoid-activated packaging film are reviewed. The carotenoids-based packaging film can enhance packaged food's shelf life and indicate the freshness of meat and vegetables in real-time. Therefore, incorporating carotenoid-based pigment into the polymer matrix could be promising for developing novel packaging materials.

Polyphenols and polyphenols-based biopolymer materials: Regulating iron absorption and availability from spontaneous to controllable

Iron is an important trace element in the body, and it will seriously affect the body's normal operation if it is taken too much or too little. A large number of patients around the world are suffering from iron disorders. However, there are many problems using drugs to treat iron overload and causing prolonged and unbearable suffering for patients. Controlling iron absorption and utilization through diet is becoming the acceptable, safe and healthy method. At present, many literatures have reported that polyphenols can interact with iron ions and can be expected to chelate iron ions, depending on their types and structures. Besides, polyphenols often interact with other macromolecules in the diet, which may complicate this phenols-Fe behavior and give rise to the necessity of building phenolic based biopolymer materials. The biopolymer materials, constructed by self-assembly (non-covalent) or chemical modification (covalent), show excellent properties such as good permeability, targeting, biocompatibility, and high chelation ability. It is believed that this review can greatly facilitate the development of polyphenols-based biopolymer materials construction for regulating iron and improving the well-being of patients.

Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review

Functionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.

Research progress on chitin/chitosan-based emulsion delivery systems and their application in lipid digestion regulation

Excessive lipid intake is linked to an elevated risk of health problems. However, reducing lipid contents may influence food structure and flavor. Some alternatives are needed to control the lipid absorption. Emulsions are common carriers for lipids, which can control the hydrolysis and absorption of lipids. Chitin (Ch) and chitosan (CS) are natural polysaccharides with good biodegradability, biocompatibility, and unique cationic properties. They have been reported to be able to delay lipolysis, which can be regarded as one of the most promising agents that regulates lipid digestion (LiD). The application of Ch/CS and their derivatives in emulsions are summarized in this review with a focus on their performances and mechanisms for LiD regulation, aiming to provide theoretical guidance for the development of novel Ch/CS emulsions, and the regulation of LiD. A reasonable design of emulsion interface can provide its resistance to the external environment and then control LiD. The properties of emulsion interface are the key factors affecting LiD. Therefore, systematic study on the relationship between Ch/CS-based emulsion structure and LiD can not only instruct the reasonable design of emulsion interface to accurately regulate LiD, but also provide scientific guidelines for applying Ch/CS in functional food, medicine and other fields.

Adsorption of Methyl Orange from Water Using Chitosan Bead-like Materials

Natural product waste treatment and the removal of harmful dyes from water by adsorption are two of the crucial environmental issues at present. Traditional adsorbents are often not capable in removing detrimental dyes from wastewater due to their hydrophilic nature and because they form strong bonds with water molecules, and therefore they remain in the dissolved state in water. Consequently, new and effective sorbents are required to reduce the cost of wastewater treatment as well as to mitigate the health problems caused by water pollution contaminants. In this study, the adsorption behaviour of methyl orange, MO, dye on chitosan bead-like materials was investigated as a function of shaking time, contact time, adsorbent dosage, initial MO concentration, temperature and solution pH. The structural and chemical properties of chitosan bead-like materials were studied using several techniques including SEM, BET, XRD and FTIR. The adsorption process of methyl orange by chitosan bead materials was well described by the Langmuir isotherm model for the uptake capacity and followed by the pseudo-second-order kinetic model to describe the rate processes. Under the optimal conditions, the maximum removal rate (98.9%) and adsorption capacity (12.46 mg/g) of chitosan bead-like materials were higher than those of other previous reports; their removal rate for methyl orange was still up to 87.2% after three regenerative cycles. Hence, this chitosan bead-like materials are very promising materials for wastewater treatment.

Polysaccharide‑platinum complexes for cancer theranostics

Platinum anticancer drugs have been explored and developed in recent years to reduce systematic toxicities and resist drug resistance. Polysaccharides derived from nature have abundant structures as well as pharmacological activities. The review provides insights on the design, synthesis, characterization and associating therapeutic application of platinum complexes with polysaccharides that are classified by electronic charge. The complexes give birth to multifunctional properties with enhanced drug accumulation, improved tumor selectivity and achieved synergistic antitumor effect in cancer therapy. Several techniques developing polysaccharides-based carriers newly are also discussed. Moreover, the lasted immunoregulatory activities of innate immune reactions triggered by polysaccharides are summarized. Finally, we discuss the current shortcomings and outline potential strategies for improving platinum-based personalized cancer treatment. Using platinum-polysaccharides complexes for improving the immunotherapy efficiency represents a promising framework in future.

Enhance the oral insulin delivery route using a modified chitosan-based formulation fabricated by microwave

Chitosan (Cs) was subjected to ball milling and subsequently functionalized with Dinitro salicylic acid (Cs-DNS) to enhance the efficacy of oral insulin delivery. The hydrodynamic spherical particle sizes exhibited 33.29 ± 5.08 nm for modified Cs-DNS NPs. Irrespective of insulin entrapment, zeta potential measurements revealed positively charged Cs-DNS NPs (+ 35 ± 3.5 mV). The entrapment performance (EP%) was evaluated in vitro, and insulin release patterns at various pH levels. The EP% for Cs-DNS NPs was 99.3 ± 1.6. Cs- DNS NPs retained a considerable amount of insulin (92 %) in an acidic medium, and significant quantities were released at increasing pH values over time. In vivo investigations, the diabetic rats which taken insulin-incorporated NPs had lower serum glucose levels (SGL) after 3 h to (39.4 ± 0.6 %) for Cs- DNS NPs. For insulin-incorporated Cs- DNS NPs, the bioavailability (BA%) and pharmacological availability (PA%) were 17.5 ± 0.31 % and 8.6 ± 0.8 %, respectively. The assertion above highlights the significance and effectiveness of modified chitosan in promoting insulin delivery, decreasing SGL levels, and guaranteeing safety.

Chitosan-Based Hydrogel in the Management of Dermal Infections: A Review

The main objective of this review is to provide a comprehensive overview of the current evidence regarding the use of chitosan-based hydrogels to manage skin infections. Chitosan, a naturally occurring polysaccharide derived from chitin, possesses inherent antimicrobial properties, making it a promising candidate for treating various dermal infections. This review follows a systematic approach to analyze relevant studies that have investigated the effectiveness of chitosan-based hydrogels in the context of dermal infections. By examining the available evidence, this review aims to evaluate these hydrogels' overall efficacy, safety, and potential applications for managing dermal infections. This review's primary focus is to gather and analyze data from different recent studies about chitosan-based hydrogels combating dermal infections; this includes assessing their ability to inhibit the growth of microorganisms and reduce infection-related symptoms. Furthermore, this review also considers the safety profile of chitosan-based hydrogels, examining any potential adverse effects associated with their use. This evaluation is crucial to ensure that these hydrogels can be safely utilized in the management of dermal infections without causing harm to patients. The review aims to provide healthcare professionals and researchers with a comprehensive understanding of the current evidence regarding the use of chitosan-based hydrogels for dermal infection management. The findings from this review can contribute to informed decision-making and the development of potential treatment strategies in this field.

Antibacterial and antioxidant properties of phenolic acid grafted chitosan and its application in food preservation: A review

Chitosan is a bio-renewable natural polymeric material. The antibacterial and antioxidant activity of chitosan can be enhanced by grafting with phenolic acids to further expand its application in food. Therefore, this paper focuses on reviewing the structure, antimicrobial and antioxidant activities and their mechanisms with phenolic acid-g-CS, evaluating its cytotoxicity, and describing its application in various food preservation. In general, different reaction mechanisms of phenolic acid-g-CS synthesis lead to different product structures. Compared to chitosan, phenolic acid-g-chitosan exhibited enhanced antibacterial and antioxidant activities. The toxicity assessment showed that phenolic acid-g-CS is not cytotoxic. Moreover, phenolic acid-g-CS has been applied to a variety of food products such as fruits, vegetables and meat with good results. Overall, this review provides a certain reference for subsequent researchers to design phenolic acid-g-CS more rationally and for the subsequent development of phenolic acid-g-CS in food preservation.

Research on essential performance of oxidized chitosan-crosslinked acellular porcine aorta modified with bioactive SCPP/DOPA for esophageal scaffold with enhanced mechanical strength, biocompatibility and anti-inflammatory

Acellular porcine aorta (APA) is an excellent candidate for an implanted scaffold but needs to be modified with appropriate cross-linking agent to increase its mechanical property and storage time in vitro as well as to give itself some bioactivities and eliminate its antigenicity for acting as a novel esophageal prosthesis. In this paper, a polysaccharide crosslinker (oxidized chitosan, OCS) was prepared by oxidizing chitosan using NaIO₄ and further used to fix APA to prepare a novel esophageal prosthesis (scaffold). And then the surface modification with dopamine (DOPA) and strontium-doped calcium polyphosphate (SCPP) were performed one after another to prepare DOPA/OCS-APA and SCPP-DOPA/OCS-APA to improve the biocompatibility and inhibit inflammation of the scaffolds. The results showed that the OCS with a feeding ratio of 1.5:1.0 and a reaction time of 24 h had a suitable molecular weight and oxidation degree, almost no cytotoxicity and good cross-linking effect. Compared with glutaraldehyde (GA) and genipin (GP), OCS-fixed APA could provide a more suitable microenvironment for cell proliferation. The vital cross-linking characteristics and cytocompatibility of SCPP-DOPA/OCS-APA were evaluated. Results suggested that SCPP-DOPA/OCS-APA exhibited suitable mechanical properties, excellent resistance to enzymatic degradation/acid degradation, suitable hydrophilicity, and the ability to promote the proliferation of Human normal esophageal epithelial cells (HEECs) and inhibit inflammation in vitro. In vivo tests also confirmed that SCPP-DOPA/OCS-APA could diminish the immunological response to samples and had a positive impact on bioactivity and anti-inflammatory. In conclusion, SCPP-DOPA/OCS-APA could act as an effective, bioactive artificial esophageal scaffold and be expected to be used for clinical in the future.

Polyelectrolyte Coatings-A Viable Approach for Cultural Heritage Protection

The continuous degradation of cultural heritage artifacts (due to different factors, including the rising air pollution, climate change or excessive biological activity, among others) requires the continuous development of protection strategies, technologies and materials. In this regard, polyelectrolytes have offered effective ways to fight against degradation but also to conserve the cultural heritage objects. In this review, we highlight the key developments in the creation and use of polyelectrolytes for the preservation, consolidation and cleaning of the cultural heritage artifacts (with particular focus on stone, metal and artifacts of organic nature, such as paper, leather, wood or textile). The state of the art in this area is presented, as well as future development perspectives.

Synthesis of acrylamide-g-melanin/itaconic acid-g-psyllium based nanocarrier for capecitabine delivery: In vivo and in vitro anticancer activity

The present research aims to synthesize the capecitabine-loaded core-shell nanoparticles of acrylamide-grafted melanin and itaconic acid-grafted psyllium (Cap@AAM-g-ML/IA-g-Psy-NPs) to deliver the drug to the targeted colonic area, enhancing their anti-cancer activity. The drug release behavior of Cap@AAM-g-ML/IA-g-Psy-NPs was studied at several biological pH in which maximum drug release (95 %) was observed at pH 7.2. The drug release kinetic data was in accordance with the first-order (R² = 0.9706) kinetic model. The cytotoxicity of Cap@AAM-g-ML/IA-g-Psy-NPs was investigated on HCT-15 cell line and Cap@AAM-g-ML/IA-g-Psy-NPs demonstrated outstanding toxicity towards HCT-15 cell line. In-vivo study on DMH-induced colon cancer rat model also exhibited that Cap@AAM-g-ML/IA-g-Psy-NPs enhanced anticancer activity against cancer cells as compared to capecitabine. Histology studies of heart, liver and kidney cells indicate that inflation due to cancer induction by DMH is significantly reduced when treated with Cap@AAM-g-ML/IA-g-Psy-NPs. Thus, the present study procures a worthwhile and nominal approach toward the synthesis of Cap@AAM-g-ML/IA-g-Psy-NPs for anticancer applications.

Conjugation of folic acid with poly (NVCL-co-PEGMA)-grafted chitosan as a new doxorubicin delivery system

This paper aimed to investigate the synthesis of a novel drug delivery system (DDS) to target tumors and implement the controlled release of doxorubicin (DOX). Chitosan was modified with 3-mercaptopropyltrimethoxysilane and subjected to graft polymerization to implement grafting with the biocompatible thermosensitive copolymer of poly (NVCL-co-PEGMA). A folate receptor-targeting agent was obtained by attaching folic acid. The DDS loading capacity for DOX via physisorption was obtained to be 846.45 mg/g. The synthesized DDS showed temperature- and pH-sensitive drug release behavior in vitro. A temperature of 37 °C and a pH of 7.4 hindered the DOX release, whereas a temperature of 40 °C and a pH of 5.5 led to DOX release acceleration. In addition, the release of DOX was found to occur in a Fickian diffusion mechanism. The MTT assay tests indicated that the synthesized DDS was not detectably toxic to cell lines of breast cancer, while the toxicity of the DOX-loaded DDS was found to be substantial. The cell absorption enhancement of folic acid led to higher cytotoxicity of the DOX-loaded DDS than bare DOX. As a result, the proposed DDS could be a promising alternative for the targeted therapy of breast cancer through controlled drug release.

Chitosan-Based Biomaterials: Insights into Chemistry, Properties, Devices, and Their Biomedical Applications

Chitosan is a marine-origin polysaccharide obtained from the deacetylation of chitin, the main component of crustaceans’ exoskeleton, and the second most abundant in nature. Although this biopolymer has received limited attention for several decades right after its discovery, since the new millennium chitosan has emerged owing to its physicochemical, structural and biological properties, multifunctionalities and applications in several sectors. This review aims at providing an overview of chitosan properties, chemical functionalization, and the innovative biomaterials obtained thereof. Firstly, the chemical functionalization of chitosan backbone in the amino and hydroxyl groups will be addressed. Then, the review will focus on the bottom-up strategies to process a wide array of chitosan-based biomaterials. In particular, the preparation of chitosan-based hydrogels, organic–inorganic hybrids, layer-by-layer assemblies, (bio)inks and their use in the biomedical field will be covered aiming to elucidate and inspire the community to keep on exploring the unique features and properties imparted by chitosan to develop advanced biomedical devices. Given the wide body of literature that has appeared in past years, this review is far from being exhaustive. Selected works in the last 10 years will be considered.

Insights into the Synergistic Removal of Copper(II), Cadmium(II), and Chromium(III) Ions Using Modified Chitosan Based on Schiff Bases-g-poly(acrylonitrile)

Chitosan has received broad consideration as an adsorbent for all pollutants because of its low cost and great adsorption potential. However, its shortcomings, including sensitivity to pH, poor thermal stability, and poor mechanical strength, limit its use. The functional groups of chitosan can be modified to enhance its performance by the grafting technique and Schiff base modification. The grafting process used acrylonitrile (Ch-g-PAN) as a monomer and potassium persulfate as an initiator. After that, the modification via preparation of the Schiff base reaction using salicylaldehyde (Ch-g-Sch I) and P-anisaldehyde (Ch-g-Sch II) was carried out. The synthesized copolymers were detailed and characterized through several spectroscopic and microscopic techniques including infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. In addition, Ch-g-Sch I and Ch-g-Sch II were applied in the removal of different metal ions such as Cu²⁺, Cd²⁺, and Cr³⁺. The maximum adsorption capacity of Ch-g-Sch I for Cd²⁺ was 183.7 mg g^-1 in 24 h, while in the case of Ch-g-Sch II, the maximum adsorption capacity for Cd²⁺ was improved to 322.9 mg g^-1 for the same time. Moreover, adsorption thermodynamic analysis displays that the all ion adsorption process was not random and the pseudo-second-order model fitted with experimental results. Finally, Ch-g-Sch I and Ch-g-Sch II were applied as designs for industrial wastewater treatment with significant efficiency.

Mechanical Amorphization of Chitosan with Different Molecular Weights

Mechanical amorphization of three chitosan samples with high, medium, and low molecular weight was studied. It is shown that there are no significant differences between the course of amorphization process in a planetary ball mill of chitosan with different molecular weights, and the maximum degree of amorphization was achieved in 600 s of high intensity mechanical action. Specific energy consumption was 28 kJ/g, being comparable to power consumption for amorphization of cellulose determined previously (29 kJ/g) and 5–7-fold higher than that for amorphization of starch (4–6 kJ/g). Different techniques for determining the crystallinity index (CrI) of chitosan (analysis of the X-ray diffraction (XRD) data, the peak height method, the amorphous standard method, peak deconvolution, and full-profile Rietveld analysis) were compared. The peak height method is characterized by a broader working range but provides deviated CrI values. The peak deconvolution method (with the amorphous Voigt function) makes it possible to calculate the crystallinity index of chitosan with greater accuracy, but the analysis becomes more difficult with samples subjected to mechanical processing. In order to refine the structure and calculation of CrI by the Rietveld method, an attempt to optimize the structure file by the density functional theory (DFT) method was performed. The averaged profile of amorphous chitosan approximated by an eighth-order Fourier model improved the correctness of the description of the amorphous contribution for XRD data processing. The proposed equation may be used as a universal standard model of amorphous chitosan to determine the crystallinity index both for the amorphous standard method and for peak deconvolution of XRD patterns for arbitrary chitosan samples.

Chitosan–Hydroxycinnamic Acids Conjugates: Emerging Biomaterials with Rising Applications in Biomedicine

Over the past thirty years, research has shown the huge potential of chitosan in biomedical applications such as drug delivery, tissue engineering and regeneration, cancer therapy, and antimicrobial treatments, among others. One of the major advantages of this interesting polysaccharide is its modifiability, which facilitates its use in tailor-made applications. In this way, the molecular structure of chitosan has been conjugated with multiple molecules to modify its mechanical, biological, or chemical properties. Here, we review the conjugation of chitosan with some bioactive molecules: hydroxycinnamic acids (HCAs); since these derivatives have been probed to enhance some of the biological effects of chitosan and to fine-tune its characteristics for its application in the biomedical field. First, the main characteristics of chitosan and HCAs are presented; then, the currently employed conjugation strategies between chitosan and HCAs are described; and, finally, the studied biomedical applications of these derivatives are discussed to present their limitations and advantages, which could lead to proximal therapeutic uses.

Chitosan degradation products promote healing of burn wounds of rat skin

Burns can impair the barrier function of the skin, and small burns can also cause high mortality. The WHO has described that over 180,000 people die of burns worldwide each year. Thus, the treatment of burn wounds is a major clinical challenge. Chitooligosaccharides (COS) are alkaline amino oligosaccharides with small molecular weights obtained by enzyme or chemical degradation of chitosan. With the characteristics of biocompatibility, water solubility and degradability, it has attracted increasing attention in the fields of biomedicine. In the present study, we used COS to treat deep second-degree burn wounds of rat skin and found that COS was able to promote wound healing. We also revealed that COS could promote fibroblast proliferation. Transcriptome sequencing analysis was performed on COS-treated fibroblasts to identify the underlying mechanisms. The results showed that COS was able to promote wound healing through regulation of the mitogen-activated protein kinase (MAPK) pathway and growth factor Hepatocyte Growth Factor (HGF). Our results provide a potential drug for burn wound therapy and the related molecular mechanism.

Use of Opuntia ficus-indica Fruit Peel as a Novel Source of Mucilage with Coagulant Physicochemical/Molecular Characteristics

The peels obtained as a byproduct from the processing of fruits (prickly pears) of the Cactaceae family are a rich source of mucilage, a hydrocolloid biopolymer that may have potential application in water/wastewater treatment as a natural coagulant. In this study, the structural (UPLC-QTOF-MS, FTIR, Raman, NMR, XRD, and zeta potential), morphological (SEM), and thermal (DSC/TGA) characterizations of the mucilage extracted from the peels of Opuntia ficus-indica (OFI) fruits were carried out. UPLC-QTOF-MS results revealed the presence of a branched polymer with an average molecular weight of 0.44 KDa for this mucilage in aqua media. The NMR spectra of mucilage in DMSO-d6 indicated that it seemed well-suited as a coagulant with its typical oligosaccharide structure. FTIR studies confirmed the presence of hydroxyl and carboxyl functional groups in the mucilage, indicating its polyelectrolyte nature that could provide coagulating properties through binding and adsorption mechanisms. Likewise, the zeta potential of −23.63 ± 0.55 mV showed an anionic nature of the mucilage. Power XRD technique evidenced the presence of crystalline poly(glycine-β-alanine), glutamic acid, and syn-whewellite. SEM images revealed an irregular and amorphous morphology with cracks, which are suitable characteristics for adsorption mechanisms. The mucilage exhibited two endothermic transitions, with a decomposition temperature in uronic acid of 423.10 °C. These findings revealed that mucilage obtained from OFI fruit peels has molecular and physicochemical characteristics that are suited to its possible application as a natural coagulant in water/wastewater treatments.