Insight into the effect of sulfonated chitosan on the structure, rheology and fibrillogenesis of collagen

Collagen Scaffolds Functionalized by Cu2+-Chelated EGCG Nanoparticles with Anti-Inflammatory, Anti-Oxidation, Vascularization, and Anti-Bacterial Activities for Accelerating Wound Healing

Skin injury is a common health problem worldwide, and the highly complex healing process poses critical challenges for its management. Therefore, wound dressings with salutary effects are urgently needed for wound care. However, traditional wound dressing with a single function often fails to meet the needs of wound repair, and the integration of multiple functions has been required for wound repair. Herein, Cu2+-chelated epigallocatechin gallate nanoparticles (EAC NPs), with radical scavenging, inflammation relieving, bacteria restraining, and vascularization accelerating capacities, are adopted to functionalize collagen scaffold, aiming to promote wound healing. Radical scavenging experiments verify that EAC NPs could efficiently scavenge radicals. Additionally, EAC NPs could effectively remove Escherichia coli and Staphylococcus aureus. H2O2 stimuli-responsive EAC NPs show slow and sustained release properties of Cu2+. Furthermore, EAC NPs exhibit protective effects against H2O2-induced oxidative-stress damage and anti-inflammatory activity in vivo. Physicochemical characterizations show that the introduction of EAC NPs does not disrupt the gelation behavior of collagen, and the composite scaffolds (CS) remain porous structure similar to collagen scaffold. Animal experiments demonstrate that CS could promote wound healing through improving the thickness of renascent epidermis and number of new vessels. CS with multiple salutary functions is a promising dressing for wound care.

Chondroitin sulfate, dermatan sulfate, and hyaluronic acid differentially modify the biophysical properties of collagen-based hydrogels

Fibrillar collagens and glycosaminoglycans (GAGs) are structural biomolecules that are natively abundant to the extracellular matrix (ECM). Prior studies have quantified the effects of GAGs on the bulk mechanical properties of the ECM. However, there remains a lack of experimental studies on how GAGs alter other biophysical properties of the ECM, including ones that operate at the length scales of individual cells such as mass transport efficiency and matrix microstructure. This study focuses on the GAG molecules chondroitin sulfate (CS), dermatan sulfate (DS), and hyaluronic acid (HA). CS and DS are stereoisomers while HA is the only non-sulfated GAG. We characterized and decoupled the effects of these GAG molecules on the stiffness, transport, and matrix microarchitecture properties of type I collagen hydrogels using mechanical indentation testing, microfluidics, and confocal reflectance imaging, respectively. We complement these biophysical measurements with turbidity assays to profile collagen aggregate formation. Surprisingly, only HA enhanced the ECM indentation modulus, while all three GAGs had no effect on hydraulic permeability. Strikingly, we show that CS, DS, and HA differentially regulate the matrix microarchitecture of hydrogels due to their alterations to the kinetics of collagen self-assembly. In addition to providing information on how GAGs define key physical properties of the ECM, this work shows new ways in which stiffness measurements, microfluidics, microscopy, and turbidity kinetics can be used complementarily to reveal details of collagen self-assembly and structure. STATEMENT OF SIGNIFICANCE: Collagen and glycosaminoglycans (GAGs) are integral to the structure, function, and bioactivity of the extracellular matrix (ECM). Despite widespread interest in collagen-GAG composite hydrogels, there is a lack of quantitative understanding of how different GAGs alter the biophysical properties of the ECM across tissue, cellular, and subcellular length scales. Here we show using mechanical, microfluidic, microscopy, and analytical methods and measurements that the GAG molecules chondroitin sulfate, dermatan sulfate, and hyaluronic acid differentially regulate the mechanical, transport, and microstructural properties of hydrogels due to their alterations to the kinetics of collagen self-assembly. As such, these results will inform improved design and utilization of collagen-based scaffolds of tailored composition, mechanical properties, molecular availability due to mass transport, and microarchitecture.

Production of green-natural and "authentic" cultured meat based on proanthocyanidins-dialdehyde chitosan-collagen ternary hybrid edible scaffolds

Cultured meat has the potential to fulfill the meat demand for the growing human population, but cultured meat development will be required to simplify the production process and produce naturally cultured meat, such as no longer stripping off scaffolders and adding artificial dyes. In this study, proanthocyanidins (PC) and dialdehyde chitosan (DAC) were employed as dual crosslinkers with collagen to prepare a hybrid 3D edible scaffold for the production of high-quality cell-cultured meat. The results revealed that the scaffold was biocompatible and could offer robust mechanical support and adhesion sites for bovine myoblasts, enabling long-term cell culture. Meanwhile, the Col-PC-DAC scaffold promoted the myogenic differentiation of bovine myoblasts and extracellular matrix protein secretion, further affecting the texture of cultured meat. After cooking the cultured meat and beef, it was shown that the cultured meat had some similarities to beef in color and flavor. Importantly, our findings demonstrate that cultured meat can acquire a color remarkably similar to that of conventional beef without the need for artificial dyeing. This breakthrough not only simplifies the production process but also ensures a more natural and appealing appearance of cultured meat. In conclusion, the proanthocyanidins-dialdehyde chitosan-collagen hybrid 3D edible scaffolds provide a new option for producing cultured meat that satisfies consumer expectations.

Collagen and gelatin: Structure, properties, and applications in food industry

Food-producing animals have the highest concentration of collagen in their extracellular matrix. Collagen and gelatin are widely used in food industry due to their specific structural, physicochemical, and biochemical properties, which enable them to improve health and nutritional value as well as to increase the stability, consistency, and elasticity of food products. This paper reviews the structural and functional properties including inherent self-assembly, gel forming, water-retaining, emulsifying, foaming, and thickening properties of collagen and gelatin. Then the colloid structures formed by collagen such as emulsions, films or coatings, and fibers are summarized. Finally, the potential applications of collagen and gelatin in muscle foods, dairy products, confectionary and dessert, and beverage products are also reviewed. The objective of this review is to provide the current market value, progress as well as applications of collagen and its derivatives in food industry.

Tunable Stress Relaxing Biomimetic Matrices: Hyaluronan/Hydroxyapatite Hybridization Mediates Assembly of Collagen Fibrils

The alluring correlations of cellular behaviors with viscoelastic extracellular matrices have driven increasing endeavors directed toward the understanding of mechanical cues on cell growth and differentiation via preparing biomimetic scaffolds/gels with viscoelastic controllability. Indeed, systematic investigations, especially into calcium phosphate-containing biomimetics, are relatively rare. Here, oxidized hyaluronic acid/hydroxyapatite hybrids (OHAHs) were synthesized by hyaluronan-mediated biomimetic mineralization with confined ion diffusion and subsequent oxidization treatment. The collagen self-assembly was applied to fabricate tunable stress relaxing fibrillar matrices in the presence of OHAHs in which the incorporated hyaluronic acid with aldehyde groups acted to improve the component compatibility as well as to supplement the molecular interactions with the occurrence of a Schiff-base reaction. With the addition of varying OHAH contents, the self-assembly behavior of collagen was altered, and the obtained collagen-hybrid (CH) matrices presented a heterogeneous fibrillar structure interspersed with OHAHs, characterized by large fibrillar bundles coexisting with small fibrils. The OHAHs improved the hydrogel stability of pure collagen, and according to rheological and nanoindentation measurements, CH matrices also exhibited tunable stress relaxation rates, following an OHAH concentration-dependent fashion. The proliferation and spreading of MC3T3-E1 cells cultured onto such CH matrices were further found to increase with the stress relaxing rate of the matrices. The present study showed that the introduction of hydroxyapatite incorporated with active hyaluronic acid during collagen reconstitution was a simple and effective strategy to realize the preparation of tunable stress relaxing biomimetic matrices potentially used for further appraising the regulation of mechanical cues on cell behaviors.

Impact of Ultrasonication on the Self-Assembly Behavior and Gel Properties of Bovine Bone Collagen I

This study deliberated the effect of ultrasonic treatment on collagen self-assembly behavior and collagen fibril gel properties. Bovine bone collagen I which had undergone ultrasonic treatment with different power (0–400 W) and duration (0–60 min) was analyzed. SDS-PAGE and spectroscopic analysis revealed that ultrasonic treatment decreased collagen molecular order degree and the number of hydrogen bonds, stretching collagen telopeptide regions while maintaining the integrity of the collagen triple-helical structure. Ultrasonic treatment (p ≤ 200 W, t ≤ 15 min) dispersed the collagen aggregates more evenly, and accelerated collagen self-assembly rate with a decreased but more homogeneous fibril diameter (82.78 ± 16.47–115.52 ± 19.51 nm) and D-periodicity lengths (62.1 ± 2.9–66.5 ± 1.8 nm) than that of the untreated collagen (119.15 ± 27.89 nm; 66.5 ± 1.8 nm). Meanwhile, ultrasonic treatment (p ≤ 200 W, t ≤ 15 min) decreased the viscoelasticity index and gel strength, enhancing thermal stability and promoting specific surface area and porosity of collagen fibril gels than that of the untreated collagen fibril gel. These results testified that collagen self-assembly behavior and collagen fibril gel properties can be regulated by ultrasonic treatment through multi-hierarchical structural alteration. This study provided a new approach for controlling in vitro collagen fibrillogenesis process so as to manufacture novel desirable collagen-based biomaterials with propitious performances for further valorization.

Preparation and Characterization of Nanocomposite Hydrogels Based on Self-Assembling Collagen and Cellulose Nanocrystals

Collagen (Col) hydrogels are an important biomaterial with many applications in the biomedical sector. However, deficiencies, including insufficient mechanical properties and a rapid rate of biodegradation, hamper their application. In this work, nanocomposite hydrogels were prepared by combining a cellulose nanocrystal (CNC) with Col without any chemical modification. The high-pressure, homogenized CNC matrix acts as nuclei in the collagen's self-aggregation process. The obtained CNC/Col hydrogels were characterized in terms of their morphology, mechanical and thermal properties and structure by SEM, rotational rheometer, DSC and FTIR, respectively. Ultraviolet-visible spectroscopy was used to characterize the self-assembling phase behavior of the CNC/Col hydrogels. The results showed an accelerated assembling rate with the increasing loading of CNC. The triple-helix structure of the collagen was preserved with a dosage of CNC of up to 15 wt%. The CNC/Col hydrogels demonstrated an improvement in both the storage modulus and thermal stability which is attributed to the interaction between the CNC and collagen by the hydrogen bonds.

Thrombin and Factor Xa Hydrolysis of Chromogenic Substrates in the Presence of Sulfated Derivatives of Galactomannan and Galactoglucomannan Natural Gels

Polysaccharides are important structural components of all plant species. Gel-like polysaccharides have found wide application in various fields, including medicine, construction, and the food industry. In the present work, galactomannan and galactoglucomannan gel-like polysaccharides were modified with sulfate groups and their anticoagulant activity was studied. Sulfation with chlorosulfonic acid in pyridine and with sulfamic acid in pyridine and a sulfamic acid-urea deep eutectic solvent were used as synthesis routes. The resulting gel-like polysaccharide sulfates were studied by elemental analysis, Fourier-transform infrared spectroscopy, and gel permeation chromatography. It was established that the anticoagulant effect of sulfated galactoglucomannan (SGGM) and galactomannan (SGM-1 and SGM-2) is related to an independent antithrombin-independent decrease in the amidolytic activity of thrombin and factor Xa. It is shown that the inhibitory activity of SGGM and SGM-2 against the collagen-induced platelet aggregation can be an additional factor in selecting compounds that are most promising for modifying polymer surfaces to ensure resistance to blood clotting.

Changes in Quality and Collagen Properties of Cattle Rumen Smooth Muscle Subjected to Repeated Freeze-Thaw Cycles

This study revealed changes in the quality, structural and functional collagen properties of cattle rumen smooth muscle (CSM) during F-T cycles. The results showed that thawing loss, pressing loss, β-galactosidase, β-glucuronidase activity, β-sheet content, emulsifying activity index (EAI), emulsion stability index (ESI), surface hydrophobicity, and turbidity of samples were significantly (p < 0.05) increased by 108.12%, 78.33%, 66.57%, 76.60%, 118.63%, 119.57%, 57.37%, 99.14%, and 82.35%, respectively, with increasing F-T cycles. Meanwhile, the shear force, pH, collagen content, α-helix content, thermal denaturation temperature (Tmax), and enthalpy value were significantly (p < 0.05) decreased by 30.88%, 3.19%, 33.23%, 35.92%, 10.34% and 46.51%, respectively. Scanning electron microscopy (SEM) and SDS-PAGE results indicated that F-T cycles induced an increase in disruption of CSM muscle microstructure and degradation of collagen. Thus, repeated F-T cycles promoted collagen degradation and structural disorder in CSM, while reducing the quality of CSM, but improving the functional collagen properties of CSM. These findings provide new data support for the development, processing, and quality control of CSM.

Interactions of two phosphate ester monomers with hydroxyapatite and collagen fibers and their contributions to dentine bond performance

OBJECTIVES

To evaluate the interactions of two phosphate ester monomers [10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) and dipentaerythritol penta-acrylate phosphate (PENTA)] with hydroxyapatite and collagen and understand their influence on dentine bonding.

METHODS

Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance, ultraviolet-visible, and molecular docking were applied for separately evaluating the interactions of two monomers with hydroxyapatite and collagen. Hydrophilicity tests and morphological observation were employed to characterize pretreated dentine. Microtensile bond strength (μTBS) and nanoleakage were investigated to evaluate the bonding performance. Hydroxyproline assay, in situ zymography, and matrix metalloproteinase-9 (MMP-9) activity assay were used to confirm the MMP inhibition.

RESULTS

Chemoanalytic characterization confirmed the interactions of 10-MDP and PENTA with hydroxyapatite and collagen. The interactions of PENTA were weaker than 10-MDP. PENTA possessed better dentine tubule sealing after etching than 10-MDP. Dentine treated with PENTA was more hydrophilic than 10-MDP. 10-MDP and PENTA treating significantly increased the initial μTBS than the control group without primer conditioning. μTBS decreased significantly during aging, and the decrease was more severe in the PENTA group than 10-MDP. The 10-MDP and PENTA groups exhibited relatively less fluorescence than the control. The relative inhibition percentages of MMP-9 decreased in the order of 10-MDP-Ca salt, 10-MDP and PENTA. The 10-MDP, PENTA, and 10-MDP-Ca salt groups showed significantly lower hydroxyproline contents than the control.

CONCLUSIONS

Although PENTA adsorbed on hydroxyapatite, it did not form a stable calcium salt. The interactions of 10-MDP with hydroxyapatite and collagen are different than those of PENTA.

CLINICAL SIGNIFICANCE

The sealing of dentinal tubules by PENTA and the inhibition of MMP by 10-MDP and its calcium salts contribute to improving the dentine bonding durability.

Developing exquisite collagen fibrillar assemblies in the presence of keratin nanoparticles for improved cellular affinity

Recently, the collagen-keratin (CK) composites have received much attention for the purpose of biomedical applications due to the intrinsic biocompatibility and biodegradability of these two proteins. However, few studies have reported the CK composites developed by the self-assembly approach and the influence of the keratin on the collagen self-assembly in vitro was still unknown. In this study, the keratin nanoparticles (KNPs) were successfully prepared by the reduction method, and we focused on investigating the effect of the varying concentrations of KNPs on the mechanism of the fibrillogenesis process of collagen. The intermolecular interaction between the two proteins revealed by the ultraviolet spectroscopy, Fourier transform-infrared (FT-IR) spectroscopy and circular dichromatic (CD) spectroscopy showed that KNPs would interact with the collagen, and keratin significantly influenced the hydrogen bonding interaction existed in collagen molecules. The SEM images exhibited the formation of exquisite fibrillar networks after incorporating the KNPs into collagen, and it was conspicuous that the KNPs could uniformly distribute on the surface of collagen fibrils via electrostatic interaction, for both of the two proteins possessed many charged moieties. In addition, the AFM images confirmed the presence of the characteristic D-periodicity of collagen fibrils, indicating that the introduction of KNPs did not disrupt the self-assembly nature of the native collagen. The cell adhesion, proliferation and migration experiments on the CK fibrils were also performed in this study. The results demonstrated that the CK composites showed a better cellular affinity compared with the collagen, thus it might be a promising candidate for the biomedical applications.