Anti-bacterial dynamic hydrogels prepared from O-carboxymethyl chitosan by dual imine bond crosslinking for biomedical applications

Softening implantable bioelectronics: Material designs, applications, and future directions

Implantable bioelectronics, integrated directly within the body, represent a potent biomedical solution for monitoring and treating a range of medical conditions, including chronic diseases, neural disorders, and cardiac conditions, through personalized medical interventions. Nevertheless, contemporary implantable bioelectronics rely heavily on rigid materials (e.g., inorganic materials and metals), leading to inflammatory responses and tissue damage due to a mechanical mismatch with biological tissues. Recently, soft electronics with mechanical properties comparable to those of biological tissues have been introduced to alleviate fatal immune responses and improve tissue conformity. Despite their myriad advantages, substantial challenges persist in surgical handling and precise positioning due to their high compliance. To surmount these obstacles, softening implantable bioelectronics has garnered significant attention as it embraces the benefits of both rigid and soft bioelectronics. These devices are rigid for easy standalone implantation, transitioning to a soft state in vivo in response to environmental stimuli, which effectively overcomes functional/biological problems inherent in the static mechanical properties of conventional implants. This article reviews recent research and development in softening materials and designs for implantable bioelectronics. Examples featuring tissue-penetrating and conformal softening devices highlight the promising potential of these approaches in biomedical applications. A concluding section delves into current challenges and outlines future directions for softening implantable device technologies, underscoring their pivotal role in propelling the evolution of next-generation bioelectronics.

Injectable, Shear-Thinning, Self-Healing, and Self-Cross-Linkable Benzaldehyde-Conjugated Chitosan Hydrogels as a Tissue Adhesive

Benzaldehyde-conjugated chitosan (CH-CBA) was synthesized by a coupling reaction between chitosan (CH) and carboxybenzaldehyde (CBA). The pH-sensitive self-cross-linking can be achieved through the Schiff base reaction. The degree of substitution (DS) of CH-CBA was controlled at 1.4-12.7% by optimizing the pH and reagent stoichiometry. The dynamic Schiff base linkages conferred strong shear-thinning and self-healing properties to the hydrogels. The viscosity of the 2 wt/v % CH-CBA hydrogel decreased from 5.3 × 107 mPa·s at a shear rate of 10-2 s-1 to 2.0 × 103 mPa·s at 102 s-1 at pH 7.4. The CH-CBA hydrogel exhibited excellent biocompatibility in vitro and in vivo. Moreover, the hydrogel adhered strongly to porcine small intestine, colon, and cecum samples, comparable to commercial fibrin glue, and exhibited effective in vivo tissue sealing in a mouse cecal ligation and puncture model, highlighting its potential as a biomaterial for application in tissue adhesives, tissue engineering scaffolds, etc.

Characterisation, slow-release, and antibacterial properties of carboxymethyl chitosan/inulin hydrogel film loaded with novel antilisterial durancin GL

This paper reports the development of a hydrogel film with antibacterial activity and controlled release characteristics. Carboxymethyl chitosan (CMCS) is grafted onto durancin GL and inulin via a mediated reaction between N-hydroxysuccinimide and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride. Rheology tests, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy, and lap shear tests confirmed the formation of a stable chemical cross-linking and excellent adhesion hydrogel with 4 % CMCS and 8 % inulin. The CMCS/inulin hydrogel film loaded with durancin GL appears transparent and uniform. FTIR spectroscopy results reveal the interaction mode among CMCS, inulin, durancin GL, and the hydrogel film structure. Cross-linking improved thermal stability and water-vapour barrier performance. The hydrophobicity of CMCS/inulin @Durancin GL increased under a durancin GL concentration of 0.036 g/30 mL, and the release of active substances is prolonged. In-vitro antibacterial capacity and salmon preservation experiments show that the addition of durancin GL enhanced the antibacterial activity of the hydrogel film. Therefore, CMCS/inulin@Durancin GL hydrogel films can be used as fresh-keeping packaging materials in practical applications.

Preparation and characterization of vanillin-conjugated chitosan-stabilized emulsions via a Schiff-base reaction

In the current work, vanillin-conjugated chitosan stabilized emulsions (CSVAEs) were successfully prepared and its characterization and antibacterial properties were investigated. Under stirring condition, CSVAEs were produced by a Schiff base reaction between the vanillin aldehyde group and the chitosan active amino group. The CSVAEs were described through Fourier transform infrared spectroscopy, X-ray diffraction, ultraviolet spectrophotometry and thermogravimetric analysis, which demonstrated the generation of Schiff bases between vanillin and chitosan. Furthermore, the CSVAEs displayed differences at different pH values, indicating their potential as pH-responsive materials. By studying their release behavior, pH 4 was a critical point at which the properties of the CSVAEs changed. The antibacterial tests showed that the CSVAEs had good pH-responsive antibacterial abilities against Staphylococcus aureus and Escherichia coli.

An injectable, self-healable, antibacterial, and pro-healing oxidized pullulan polysaccharide/carboxymethyl chitosan hydrogel for early protection of open abdominal wounds

Open abdomen (OA) is an effective method for treating critical abdominal conditions such as severe abdominal infections. The temporary abdominal closure (TAC) technique is often used to temporarily restore the physiological environment of the abdominal cavity and maintain the homeostatic balance of the abdominal cavity. However, most of the common TAC materials available today lack bio-responsiveness, tend to abrade the intestinal canal, and lead to delayed tissue healing of the wound. Hydrogels could mimic the extracellular matrix and have shown significant potential in life science fields such as tissue regeneration, wound repair, and controlled drug release. In this study, a composite hydrogel scaffold was constructed by the Schiff base reaction of oxidized pullulan polysaccharide with carboxymethyl chitosan. The hydrogel exhibited excellent self-healing, cellular biocompatibility, and antibacterial and anti-inflammatory abilities, and in experiments it reduced secondary damage caused by friction between tissue and patch, thereby preventing serious complications such as intestinal fistula, promoted M1-M2 polarization of macrophages, reduced the inflammatory response, regulated the inflammatory microenvironment in vivo, promoted angiogenesis and granulation tissue regeneration, and accelerated wound healing. Therefore, our hydrogel provides a new strategy for material-assisted wound protection during OA and has potential clinical applications.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Ultralight and highly efficient oil-water selective aerogel from carboxymethyl chitosan and oxidized β-cyclodextrin for marine oil spill cleanup

Biomass-based aerogels for oil spill cleanup have attracted tremendous research interests due to their feasibility in oil-water separation. However, the cumbersome preparation process and toxic cross-linking agents hinder their application. In this work, a facile and novel method to prepare hydrophobic aerogels is reported for the first time. Da-β-CD/CMCS aerogel (DCA), Da-β-CD/CMCS/PVA aerogel (DCPA), and hydrophobic Da-β-CD/CMCS/PVA aerogel (HDCPA) were successfully synthesized via the Schiff base reaction between carboxymethyl chitosan (CMCS) and dialdehyde β-cyclodextrin (Da-β-CD). Meanwhile, polyvinyl alcohol (PVA) acted as reinforcement and hydrophobic modification was conducted via chemical vapor deposition (CVD). The structure, mechanical properties, hydrophobic behaviors and absorption performance of aerogels were comprehensively characterized. The results indicated that the DCPA containing 7 % PVA exhibited excellent compressibility and elasticity even at a compressive strain of ε = 60 %, however, the DCA without PVA showed incompressibility, suggesting that the important role played by PVA in improving compressibility. Moreover, HDCPA possessed excellent hydrophobicity (water contact angle up to 148.4°), which could be well maintained after experiencing wear and corrosion in harsh environments. HDCPA also possesses high absorption capacities (24.4-56.5 g/g) towards different oils with satisfied recyclability. These advantages endow HDCPA with great potential and application prospects in offshore oil spill cleanup.

Recent advances in carboxymethyl chitosan-based materials for biomedical applications

Chitosan (CS) and its derivatives have been applied extensively in the biomedical field owing to advantageous characteristics including biodegradability, biocompatibility, antibacterial activity and adhesive properties. The low solubility of CS at physiological pH limits its use in systems requiring higher dissolving ability and a suitable drug release rate. Besides, CS can result in fast drug release because of its high swelling degree and rapid water absorption in aqueous media. As a water-soluble derivative of CS, carboxymethyl chitosan (CMC) has certain improved properties, rendering it a more suitable candidate for wound healing, drug delivery and tissue engineering applications. This review will focus on the antibacterial, anticancer and antitumor, antioxidant and antifungal bioactivities of CMC and the most recently described applications of CMC in wound healing, drug delivery, tissue engineering, bioimaging and cosmetics.

Aldehyde-mediated adaptive membranes with self-healing and antimicrobial properties for endometrial repair

Traditional treatment methods for irreversible endometrial damage face a number of challenges in clinical practice, the most important of which are bacterial infection and the inability to restore endometrial function. By modifying glucan, oxidized dextran (OD) with multifunctional aldehyde groups was obtained in this study. Based on the dynamic Schiff base reaction between gelatin (GA) and OD, a GA-OD adaptive membrane with good biocompatibility, self-healing, biodegradability, and antimicrobial properties was created. In vitro studies revealed that GA and OD cross-linking overcame GA's low gel temperature, accelerated gelling, and improved mechanical properties, hydrophilicity, and degradability. The dynamic bond formed by the reaction between GA and OD caused the GA-OD film to self-heal. Meanwhile, the GA-OD membrane had antibacterial properties. To assess the repair effect of GA-OD film, an in vivo rat endometrial injury model filled with GA-OD adaptive membrane was created. According to the results of the study, the GA-OD membrane was biocompatible, and the uterine tissue did not have edema and inflammation. Further study on the postoperative endometrial regeneration effect of GA-OD material showed that it had an excellent ability for epithelial reconstruction and cell proliferation. As a result, the use of GA-OD composite film in endometrial repair has promising therapeutic implications.

pH-responsive λ-cyhalothrin nanopesticides for effective pest control and reduced toxicity to Harmonia axyridis

In this study, pH-responsive LC@O-CMCS/PU nanoparticles were prepared by encapsulating λ-cyhalothrin (LC) with O-carboxymethyl chitosan (O-CMCS) to form LC/O-CMCS and then covering it with polyurethane (PU). Characterization and performance test results demonstrate that LC@O-CMCS/PU had good alkaline release properties and pesticide loading performance. Compared to commercial formulations containing large amounts of emulsifiers (e.g., emulsifiable concentrate, EC), LC@O-CMCS/PU showed better leaf-surface adhesion. On the dried pesticide-applied surfaces, the acute contact toxicity of LC@O-CMCS/PU to Harmonia axyridis (H. axyridis) was nearly 20 times lower than that of LC EC. Due to the slow-releasing property of LC@O-CMCS/PU, only 16.38 % of LC was released at 48 h in dew and effectively reduced the toxicity of dew. On the pesticide-applied leaves with dew, exposure to the LC (EC) caused 86.66 % mortality of H. axyridis larvae significantly higher than the LC@O-CMCS/PU, which was only 16.66 % lethality. Additionally, quantitative analysis demonstrated 11.33 mg/kg of λ-cyhalothrin in the dew on LC@O-CMCS/PU lower than LC (EC) with 4.54 mg/kg. In summary, LC@O-CMCS/PU effectively improves the safety of λ-cyhalothrin to H. axyridis and has great potential to be used in pest control combining natural enemies and chemical pesticides.

Research progress of hydrogels as delivery systems and scaffolds in the treatment of secondary spinal cord injury

Secondary spinal cord injury (SSCI) is the second stage of spinal cord injury (SCI) and involves vasculature derangement, immune response, inflammatory response, and glial scar formation. Bioactive additives, such as drugs and cells, have been widely used to inhibit the progression of secondary spinal cord injury. However, the delivery and long-term retention of these additives remain a problem to be solved. In recent years, hydrogels have attracted much attention as a popular delivery system for loading cells and drugs for secondary spinal cord injury therapy. After implantation into the site of spinal cord injury, hydrogels can deliver bioactive additives in situ and induce the unidirectional growth of nerve cells as scaffolds. In addition, physical and chemical methods can endow hydrogels with new functions. In this review, we summarize the current state of various hydrogel delivery systems for secondary spinal cord injury treatment. Moreover, functional modifications of these hydrogels for better therapeutic effects are also discussed to provide a comprehensive insight into the application of hydrogels in the treatment of secondary spinal cord injury.

Iminoboronate-chitooligosaccharides hydrogels with strong antimicrobial activity for biomedical applications

The paper reports hydrogels prepared from chitooligosaccharides with different polymerization degrees (14 to 51), by crosslinking with 2-formylphenylboronicacid in three molar ratios of their functionalities. The structural, morphological and supramolecular characterization confirmed a hydrogelation mechanism based on self-assembling of newly formed imine units and porous morphology. Rheological measurements confirmed the formation of thixotropic hydrogels, and swelling tests indicated mass equilibrium swelling values up to 25 in water and 9 in phosphate buffer saline. The monitoring of enzymatic degradability demonstrated the enhancing of biodegradation rate as long as the polymerization degrees of the oligomers decreased, the mass loss increasing from 16% to 43%. In vivo and ex-vivo biocompatibility investigation on experimental mice showed no cytotoxic effect, and in vitro antimicrobial tests revealed remarkable antimicrobial properties on nine strains, with a maximum inhibition diameter of 49 mm on Aspergilius brasiliensis and very good results on Cladosporium cladosporioides, Penicillium crysogenum and different Candida species.

Amphiphilic chitosan-g-poly(trimethylene carbonate) - A new approach for biomaterials design

The paper presents the synthesis and characterization of poly(trimethylene carbonate) grafted chitosan as a new water soluble biopolymer suitable for in vivo applications. The synthesis was performed via ring-opening polymerization of 1,3-dioxan-2-one (trimethylene carbonate) (TMC) monomer, initiated by the functional groups of chitosan in the presence of toluene as solvent/swelling agent. By varying the molar ratio between the glucosamine units of chitosan and TMC, a series of chitosan derivatives with different content of poly(trimethylene carbonate) chains was synthetized. The structural characterization of the polymers was realized by FTIR and ¹H NMR spectroscopy and their solubility was assessed in water and in organic solvents as well. The biocompatibility was investigated by MTS assay on Normal Human Dermal Fibroblasts, and the biodegradability was evaluated in lysozyme buffer solution. Further, the surface properties of the polymer films were analyzed by polarized optical microscopy, atomic force microscopy and water-to-air contact angle measurements. It was established that, by 5% substitution of chitosan with poly(trimethylene carbonate) chains having an average polymerization degree of 7, a water soluble polymer can be attained. Compared to the pristine chitosan, it has improved biocompatibility in solution and moderate wettability and higher biodegradability rate in solid state, pointing its suitability for in vivo applications.

Electrospinning of chitosan-based nanofibers: from design to prospective applications

Chitosan is a biopolymer originating from renewable resources, with great properties which make it an attractive candidate for plenty of applications of contemporary interest. By manufacturing chitosan into nanofibers using the electrospinning method, its potential is amplified due to the enhancement of the active surface and the low preparation cost. Many attempts were made with the aim of preparing chitosan-based nanofibers with controlled morphology targeting their use for tissue engineering, wound healing, food packaging, drug delivery, air and water purification filters. This was a challenging task, which resulted in a high amount of data, sometimes with apparent contradictory results. In this light, the goal of the paper is to present the main routes reported in the literature for chitosan electrospinning, stressing the advantages and disadvantages of each of them. Special emphasis is placed on the influence of various electrospinning parameters on the morphological characteristics of the fibers and their suitability for distinct applications.

Bioactivity of Chitosan-Based Particles Loaded with Plant-Derived Extracts for Biomedical Applications: Emphasis on Antimicrobial Fiber-Based Systems

Marine-derived chitosan (CS) is a cationic polysaccharide widely studied for its bioactivity, which is mostly attached to its primary amine groups. CS is able to neutralize reactive oxygen species (ROS) from the microenvironments in which it is integrated, consequently reducing cell-induced oxidative stress. It also acts as a bacterial peripheral layer hindering nutrient intake and interacting with negatively charged outer cellular components, which lead to an increase in the cell permeability or to its lysis. Its biocompatibility, biodegradability, ease of processability (particularly in mild conditions), and chemical versatility has fueled CS study as a valuable matrix component of bioactive small-scaled organic drug-delivery systems, with current research also showcasing CS’s potential within tridimensional sponges, hydrogels and sutures, blended films, nanofiber sheets and fabric coatings. On the other hand, renewable plant-derived extracts are here emphasized, given their potential as eco-friendly radical scavengers, microbicidal agents, or alternatives to antibiotics, considering that most of the latter have induced bacterial resistance because of excessive and/or inappropriate use. Loading them into small-scaled particles potentiates a strong and sustained bioactivity, and a controlled release, using lower doses of bioactive compounds. A pH-triggered release, dependent on CS’s protonation/deprotonation of its amine groups, has been the most explored stimulus for that control. However, the use of CS derivatives, crosslinking agents, and/or additional stabilization processes is enabling slower release rates, following extract diffusion from the particle matrix, which can find major applicability in fiber-based systems within ROS-enriched microenvironments and/or spiked with microbes. Research on this is still in its infancy. Yet, the few published studies have already revealed that the composition, along with an adequate drug release rate, has an important role in controlling an existing infection, forming new tissue, and successfully closing a wound. A bioactive finishing of textiles has also been promoting high particle infiltration, superior washing durability, and biological response.

Biobased dynamic hydrogels by reversible imine bonding for controlled release of thymopentin

Thymopentin (TP5) is widely used in the treatment of autoimmune diseases, but the short in vivo half-life of TP5 strongly restricts its clinical applications. A series of blank and TP5 loaded hydrogels were synthesized via reversible dual imine bonding by mixing water soluble O-carboxymethyl chitosan (CMCS) with a dynamer (Dy) prepared from Jeffamine and benzene-1,3,5-tricarbaldehyde. TP5 release from hydrogels was studied at 37 °C under in vitro conditions. The molar mass of CMCS, drug loading conditions and drug content were varied to elucidate their effects on hydrogel properties and drug release behaviors. Density functional theory was applied to theoretically confirm the chemical connections between TP5 or CMCS with Dy. All hydrogels exhibited interpenetrating porous architecture with average pore size from 59 to 83 μm, and pH-sensitive swelling up to 10,000% at pH 8. TP5 encapsulation affected the rheological properties of hydrogels as TP5 was partially attached to the network via imine bonding. Higher TP5 loading led to higher release rates. Faster release was observed at pH 5.5 than at pH 7.4 due to lower stability of imine bonds in acidic media. Fitting of release data using Higuchi model showed that initial TP5 release was essentially diffusion controlled. All these findings proved that the dynamic hydrogels are promising carriers for controlled delivery of hydrophilic drugs, and shed new light on the design of drug release systems by both physical mixing and reversible covalent bonding.

Synthesis of a Stable Benzoxazole Gel from an Imine Gel for Adsorption and Catalysis

Developing stable gel materials for adsorption and catalysis is one of the major themes of gel materials. However, it has been proven to be challenging to achieve them from small molecules. Herein, an imine gel is developed from tetra-aldehyde 4-{2,2-bis[(4-formylphenoxy)methyl]-3-(4-formylphenoxy)propoxy}benzaldehyde (A4) and 3,3'-dihydroxybenzidine (B2) based on dynamic covalent chemistry. The unstable A4B2-imine gel is further converted into a stable aromatic benzoxazole-linked A4B2-benzoxazole gel via oxidative cyclization, which has significantly improved chemical stability under acidic and basic conditions. Benefiting from the stability under acidic conditions, the A4B2-benzoxazole gel is used for Pd(II) adsorption and the adsorption capacity is 250 mg g^-1. After PdCl₂ immersion and reduction, palladium nanoparticles with a size distribution of 1.3-14.7 nm are encapsulated by the network structure of the stable porous benzoxazole gel matrix. The Pd@A4B2-benzoxazole gel exhibits high catalytic activity toward the reduction of toxic hexavalent chromium Cr(VI) (reaction rate constant = 0.0377 min^-1), while there is no significant decrease in the catalytic efficiency after five cycles.