Cellulose nanocrystals based clove oil Pickering emulsion for enhanced antibacterial activity

Raspberry-liked Pickering emulsions based inulin microparticles for enhanced antibacterial performance of essential oils

Pickering emulsions seem to be an effective strategy for encapsulation and stabilization of essential oils. In this work, a novel raspberry-liked Pickering emulsion (RPE) loading Mosla chinensis 'Jiangxiangru' essential oil (MJO) was successfully engineered by using ethyl lauroyl arginate (ELA) decorated nanosilica (ELA-NS) as particles emulsifier. And the ELA-NS-stabilized MJO Pickering emulsion (MJO-RPE) was further prepared into inulin-based microparticles (MJO-RPE-IMP) by spray-drying, using inulin as matrix formers. The concentration of ELA-NS could affect the formation and stabilization of MJO-RPE, and the colloidal behavior of ELA-NS could be modulated at the interfaces with concentration of ELA, thus providing unique role on stabilization of MJO-RPE. The results indicated that the MJO-RPE stabilized ELA-NS with 2 % NS modified by 0.1 % ELA had long-term stability. MJO-RPE exhibited a raspberry-liked morphology on the surface, attributed to ELA-NS covered in the droplet surface. The inulin-based matrix formers could effectively prevent MJO-RPE from agglomeration or destruction during spray-drying, and 100 % concentration of inulin based microparticles formed large composite particles with high loading capacity (98.54 ± 1.11 %) and exhibited superior thermal stability and redispersibility of MJO-RPE. The MJO-RPE exhibited strong antibacterial efficacy against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Pseudomonas aeruginosa (P. aeruginosa), owing to the adhesion to bacterial membrane dependent on the raspberry-liked surface of MJO-RPE, whose minimum inhibitory concentration (MIC) of the above three bacteria were (0.3, 0.45, and 1.2 μL/mL), respectively, lower than those (0.45, 0.6 and 1.2 μL/mL) of MJO. Therefore, the Pickering emulsion composite microparticles seemed to be a promising strategy for enhancing the stability and antibacterial activity of MJO.

Modified Amber Particles as a Stabilizer to Construct Oil-in-Water Pickering Emulsions for Improved Thermal Stability of Acorus tatarinowii Essential Oil

Lingzhu Pulvis is a classic formulation for treating febrile convulsions in children. However, Acorus tatarinowii essential oil (AT-EO) in this prescription is prone to volatilization and oxidation, compromising the efficacy and quality control of this formulation. Herein, based on the concept of "combination of medicine and adjuvant", Pickering emulsion technology was applied to enhance the stability of AT-EO using modified amber as a stabilizer. Amber was a resinous medicinal powder in Lingzhu Pulvis and was modified into a suitable stabilizer for Pickering emulsion through surface modification. A thermal stability study indicated that Pickering emulsion, stabilized by modified amber, exhibited a higher retention rate of AT-EO and lower levels of peroxide value and malondialdehyde content compared to those of the pure AT-EO group after heat treatment at 40 °C for 1, 3, and 8 h. Additionally, component analysis in content and composition revealed that the volatile components of AT-EO in the Pickering emulsion were more stable during the thermal treatment process. This study convincingly illustrates the potential of a Pickering emulsion stabilized with modified medicinal powders to improve the thermal stability of the essential oil.

Pickering emulsions of thyme oil in water using oxidized cellulose nanofibers: Towards bio-based active packaging

The antioxidant and antimicrobial properties of thyme essential oil (TEO) are useful for active food packaging, but its poor aqueous solubility restricts its applications. This work involves anionic cellulose nanofibers (CNFs) as the sole stabilizing agent for TEO-in-water emulsions, with oil concentrations ranging from 10 mL/L to 300 mL/L. A double mechanism was proposed: the adsorption of CNFs at oil/water interfaces restricted coalescence to a limited extent, while thickening (rheological stabilization) was required to avoid the buoyance of large droplets (>10 μm). Thickening effects comprised both higher viscosity (over 0.1 Pa·s at 10 s-1) and yield stress (approximately 0.9 Pa). Dilute emulsions had good film-forming capabilities, whereas concentrated emulsions were suitable for paper coating. Regarding antimicrobial activity, CNF-stabilized TEO-in-water emulsions successfully inhibited the growth of both Gram-negative (E. coli, S. typhimurium) and Gram-positive bacteria (L. monocytogenes). As for the antioxidant properties, approximately 50 mg of paper or 3-5 mg of film per mL of food simulant D1 were required to attain 50 % inhibition in radical scavenging tests. Nonetheless, despite the stability and the active properties of these bio-based hydrocolloids, providing this antioxidant and antimicrobial activity was incompatible with maintaining the organoleptic properties of the foodstuff unaltered.

Pore engineering of micro/mesoporous nanomaterials for encapsulation, controlled release and variegated applications of essential oils

Essential oils have become increasingly popular in fields of medical, food and agriculture, owing to their strongly antimicrobial, anti-inflammation and antioxidant effects, greatly meeting demand from consumers for healthy and safe natural products. However, the easy volatility and/or chemical instability of active ingredients of essential oils (EAIs) can result in the loss of activity before realizing their functions, which have greatly hindered the widely applications of EAIs. As an emerging trend, micro/mesoporous nanomaterials (MNs) have drawn great attention for encapsulation and controlled release of EAIs, owing to their tunable pore structural characteristics. In this review, we briefly discuss the recent advances of MNs that widely used in the controlled release of EAIs, including zeolites, metal-organic frameworks (MOFs), mesoporous silica nanomaterials (MSNs), and provide a comprehensive summary focusing on the pore engineering strategies of MNs that affect their controlled-release or triggered-release for EAIs, including tailorable pore structure properties (e.g., pore size, pore surface area, pore volume, pore geometry, and framework compositions) and surface properties (surface modification and surface functionalization). Finally, the variegated applications and potential challenges are also given for MNs based delivery strategies for EAIs in the fields of healthcare, food and agriculture. These will provide considerable instructions for the rational design of MNs for controlled release of EAIs.

Progress of Drug Nanocrystal Self-Stabilized Pickering Emulsions: Construction, Characteristics In Vitro, and Fate In Vivo

A drug nanocrystal self-stabilized Pickering emulsion (DNSPE) is a novel Pickering emulsion with drug nanocrystals as the stabilizer. As a promising drug delivery system, DNSPEs have attracted increasing attention in recent years due to their high drug loading capacity and ability to reduce potential safety hazards posed by surfactants or specific solid particles. This paper comprehensively reviews the progress of research on DNSPEs, with an emphasis on the main factors influencing their construction, characteristics and measurement methods in vitro, and fate in vivo, and puts forward issues that need to be studied further. The review contributes to the advancement of DNSPE research and the promotion of their application in the field of drug delivery.

Pickering emulsions stabilized by cellulose nanocrystals extracted from hazelnut shells: Production and stability under different harsh conditions

Cellulose nanocrystals (CNCs) are biodegradable particles that have emerged as promising stabilizers for Pickering emulsions. This study investigated the effectiveness of CNCs in forming the Pickering emulsion from hazelnut shells (HS), an agricultural waste. Following the alkaline and bleaching treatments applied to HS, CNCs were obtained from treated hazelnut shell with acid hydrolysis. The physicochemical characteristics of CNCs were investigated using dynamic light scattering, XRD, FTIR, SEM, and TEM. A high crystalline (69.6 %) CNCs with a spherical shape were obtained. Contact angle and interfacial tension tests were conducted and showed that CNCs had amphiphilic nature. Pickering emulsions were investigated for their size, zeta potential, and stability under varying CNC concentrations. The results showed that when CNCs concentration increased from 0.5 to 2.0 wt%, droplet diameter decreased approximately 1.8 times and zeta potential increased. Creaming was not observed during 28 days of storage in a concentration of 2.0 wt% CNCs. The CNC stabilized emulsions exhibited high stability within a range of pH, temperatures, and salt concentrations. This study demonstrated that CNCs extracted from HS as environmentally friendly and cost-effective materials, could serve as a new stabilizer for Pickering emulsions especially for high temperature and low pH sensitive products such as mayonnaise.

Clove volatile oil-loaded nanoemulsion reduces the anxious-like behavior in adult zebrafish

BACKGROUND

Clove volatile oil (CVO) and its major compound, eugenol (EUG), have anxiolytic effects, but their clinical use has been impaired due to their low bioavailability. Thus, their encapsulation in nanosystems can be an alternative to overcome these limitations.

OBJECTIVES

This work aims to prepare, characterize and study the anxiolytic potential of CVO loaded-nanoemulsions (CVO-NE) against anxious-like behavior in adult zebrafish (Danio rerio).

METHODS

The CVO-NE was prepared using Agaricus blazei Murill polysaccharides as stabilizing agent. The drug-excipient interactions were performed, as well as colloidal characterization of CVO-NE and empty nanoemulsion (B-NE). The acute toxicity and potential anxiolytic activity of CVO, EUG, CVO-NE and B-NE against adult zebrafish models were determined.

RESULTS

CVO, EUG, CVO-NE and B-NE presented low acute toxicity, reduced the locomotor activity and anxious-like behavior of the zebrafish at 4 - 20 mg kg-1. CVO-NE reduced the anxious-like behavior of adult zebrafish without affecting their locomotor activity. In addition, it was demonstrated that anxiolytic activity of CVO, EUG and CVO-NE is linked to the involvement of GABAergic pathway.

CONCLUSION

Therefore, this study demonstrates the anxiolytic effect of CVO, in addition to providing a new nanoformulation for its administration.

Cellulose Nanocrystal-Based Emulsion of Thyme Essential Oil: Preparation and Characterisation as Sustainable Crop Protection Tool

Essential oil-based pesticides, which contain antimicrobial and antioxidant molecules, have potential for use in sustainable agriculture. However, these compounds have limitations such as volatility, poor water solubility, and phytotoxicity. Nanoencapsulation, through processes like micro- and nanoemulsions, can enhance the stability and bioactivity of essential oils. In this study, thyme essential oil from supercritical carbon dioxide extraction was selected as a sustainable antimicrobial tool and nanoencapsulated in an oil-in-water emulsion system. The investigated protocol provided high-speed homogenisation in the presence of cellulose nanocrystals as stabilisers and calcium chloride as an ionic crosslinking agent. Thyme essential oil was characterised via GC-MS and UV-vis analysis, indicating rich content in phenols. The cellulose nanocrystal/essential oil ratio and calcium chloride concentration were varied to tune the nanoemulsions' physical-chemical stability, which was investigated via UV-vis, direct observation, dynamic light scattering, and Turbiscan analysis. Transmission electron microscopy confirmed the nanosized droplet formation. The nanoemulsion resulting from the addition of crosslinked nanocrystals was very stable over time at room temperature. It was evaluated for the first time on Pseudomonas savastanoi pv. savastanoi, the causal agent of olive knot disease. In vitro tests showed a synergistic effect of the formulation components, and in vivo tests on olive seedlings demonstrated reduced bacterial colonies without any phytotoxic effect. These findings suggest that crosslinked cellulose nanocrystal emulsions can enhance the stability and bioactivity of thyme essential oil, providing a new tool for crop protection.

Preparation of lauric acid esterified starch by ethanol solvothermal process and its Pickering emulsion

In this paper, the esterification modification of different kinds of starches such as waxy maize, normal maize, high-amylose maize, cassava and potato in high temperature closed system were studied by solvothermal method. The oil-in-water Pickering emulsion were prepared with esterified starches as granule stabilizer. The microscopic state of granules in the emulsion and the physical and oxidation stability of emulsion were studied. The results show that starches are not gelatinized and can be esterified at a temperature (100 °C) much higher than that of gelatinization, and the granule morphology is almost unchanged. DS (degree of substitution) values of esterified starches range from 0.0333 to 0.0512. Pickering emulsion with 50 vol% oil volume fraction prepared with 3.0 wt% granule concentration did not show any instability such as oil-water separation after storage at room temperature for 30 days. Atomic force microscope (AFM) analysis showed that all esterified starch granules had the characteristics of granular cold-water swelling starch (GCWSS). The granules completely swelled into a dense molecular chain in the emulsion, and this three-dimensional network structure improved the stability of emulsion. Therefore, the preparation of esterified starch granules by ethanol solvothermal method is a simple and effective method.

Recent advances in cellulose nanocrystals-based antimicrobial agents

Over the past five years, there has been growing interest in the design of modified cellulose nanocrystals (CNCs) as nanoscale antimicrobial agents in potential end-user applications such as food preservation/packaging, additive manufacturing, biomedical and water purification. The interest of applying CNCs-based antimicrobial agents arise due to their abilities to be derived from renewable bioresources and their excellent physicochemical properties including rod-like morphologies, large specific surface area, low toxicity, biocompatibility, biodegradability and sustainability. The presence of ample surface hydroxyl groups further allows easy chemical surface modifications for the design of advanced functional CNCs-based antimicrobial materials. Furthermore, CNCs are used to support antimicrobial agents that are subjected to instability issues. The current review summarizes recent progress in CNC-inorganic hybrid-based materials (Ag and Zn nanoparticles, other metal/metal oxide) and CNC-organic hybrid-based materials (polymers, chitosan, simple organic molecules). It focuses on their design, syntheses and applications with a brief discussion on their probable modes of antimicrobial action whereby the roles of CNCs and/or the antimicrobial agents are highlighted.

Stabilization of ginger essential oil Pickering emulsions by pineapple cellulose nanocrystals

Pickering emulsions (PE) are systems made up of two incompatible fluids, these are stabilized by solid organic or inorganic particles located on their interface. Cellulose nanocrystals (CNCs) are sustainable and biocompatible value-added naturally occurring biomolecules which are being investigated as PE stabilizers in the cosmetic, food, and pharmaceutical industries. The objective of this research was to investigate the efficacy of pineapple cellulose nanocrystals as stabilizers for a ginger essential oil-in-water Pickering emulsion. Anionic pineapple cellulose nanocrystals were prepared by acid hydrolysis. Ginger essential oil-in-water emulsions were prepared by ultrasonication. Pineapple CNC produced stable Pickering emulsions with surface average droplet size of 4.3 μm-6.2 μm, high negative zeta potential, high viscosity, and high adsorption at the interface. Pickering emulsions by ultrasonication were stable against droplet coalescence, phase separation, and droplet flocculation for at least 8 weeks at 25 °C or 40 °C at various droplet sizes. The emulsion droplet size and volume density (droplet size distribution) were evaluated by varying the particle concentration (CNC 0.25 g/100 ml or 0.50 g/100 ml) and/or oil fraction (10-20 g/100 ml). At constant oil fraction, the emulsion viscosity increased as the nanocrystal concentration increased. The cellulose nanocrystal-stabilized ginger oil-Pickering emulsions exhibited shear-thinning characteristics of a pseudo-plastic fluid. Pineapple nanocellulose crystal -stabilized ginger oil-Pickering emulsions exhibited high stability with a creaming index of zero. CNC was found to be an effective Pickering stabilizer for oil-in-water emulsions in various food applications.

Preparation and characterization of Pickering emulsion with directionally embedded antimicrobial peptide MOp2 and its preservation effect on grass carp

The peptide MOp2 obtained from Moringa oleifera seeds showed good antimicrobial activity. However, the stability of its activity has not yet been studied. In the present study, MOp2-loaded thiolated chitosan-stabilized (CMOp2) Pickering emulsion was prepared and applied to prolong the shelf life of grass carp. The encapsulation rate of MOp2 was 57.7% in CMOp2. In addition, the effects of different concentrations of CMOp2 solid particles and pH on droplet size, zeta optional and storage stability of Pickering emulsions were evaluated; the best condition for preparing Pickering emulsion through experiment was 1.75% CMOp2 solid particles at pH 9.5. Moreover, morphological observations and rheological analysis indicated that Pickering emulsions were considered a water-in-oil emulsion with typical non-Newtonian fluid characteristics. Furthermore, the prepared Pickering emulsion could significantly inhibit the growth of Escherichia coli and Staphylococcus aureus. Besides, Pickering emulsion effectively prevented spoilage of grass carp, and the Pickering emulsion-treated group reduced its pH, TVB-N and color values, inhibited microbial growth, and extended shelf life to 9 day at the storage of 4 °C. Overall, the present findings provide a reference for the application of MOp2-loaded Pickering emulsions in food preservation.

Pickering Emulsion Stabilized by β-Cyclodextrin and Cinnamaldehyde/β-Cyclodextrin Composite

A Pickering emulsion was prepared using β-cyclodextrin (β-CD) and a cinnamaldehyde (CA)/β-CD composite as emulsifiers and corn oil, camellia oil, lard oil, and fish oil as oil phases. It was confirmed that Pickering emulsions prepared with β-CD and CA/β-CD had good storage stability. The rheological experiments showed that all emulsions had G' values higher than G″, thus confirming their gel properties. The results of temperature scanning rheology experiments revealed that the Pickering emulsion prepared with β-CD and CA/β-CD composites had high stability, in the range of 20-65 °C. The chewing properties of Pickering emulsions prepared by β-CD and corn oil, camellia oil, lard, and herring oil were 8.02 ± 0.24 N, 7.94 ± 0.16 N, 36.41 ± 1.25 N, and 5.17 ± 0.13 N, respectively. The chewing properties of Pickering emulsions made with the CA/β-CD composite and corn oil, camellia oil, lard, and herring oil were 2.51 ± 0.05 N, 2.56 ± 0.05 N, 22.67 ± 1.70 N, 3.83 ± 0.29 N, respectively. The texture properties confirmed that the CA/β-CD-composite-stabilized-emulsion had superior palatability. After 28 days at 50 °C, malondialdehyde (MDA) was detected in the emulsion. Compared with the β-CD and CA + β-CD emulsion, the CA/β-CD composite emulsion had the lowest content of MDA (182.23 ± 8.93 nmol/kg). The in vitro digestion results showed that the free fatty acid (FFA) release rates of the CA/β-CD composite emulsion (87.49 ± 3.40%) were higher than those of the β-CD emulsion (74.32 ± 2.11%). This strategy provides ideas for expanding the application range of emulsifier particles and developing food-grade Pickering emulsions with antioxidant capacity.

Rambutan-liked Pickering emulsion stabilized by cellulose nanocrystals for enhancing anti-bacterial activity and anti-inflammatory effect of Chimonanthus nitens Oliv. essential oil

Owing to volatility and poor water solubility, the medical application of Chimonanthus nitens Oliv. essential oil (CEO) in the fields of medicine was strictly limited. To tackle this problem, a novel CEO loaded rambutan-liked Pickering emulsion (CEO-RPE) with a spiky surface was effectively designed by coating with carboxymethyl cellulose sodium modified cellulose nanocrystals (CCN) as stabilizer. The effect of CCN concentration on the formation and stabilization of CEO-RPE was investigated. The results showed that CEO-RPE stabilized by 1 % CCN had a smaller droplet size and exhibited a rambutan-liked surface, and was stabilized against concentrated salt and high pH condition due to the steric barrier of CCN that covered in the droplet surface. Subsequently, the antibacterial performance of CEO-RPE was investigated against E. coli, S. aureus, P. aeruginosa, and S. pneumoniae by determining the minimum inhibitory concentration (MIC). The results showed that the CEO-RPE exhibited higher antibacterial activity compared to CEO, which could be attributed to its effective adhesion to the cell membrane of bacteria. In addition, the results of anti-inflammatory experiments showed that CEO-RPE also exhibited strong anti-inflammatory effect on lipopolysaccharide (LPS)-induced acute lung injury (ALI) in rats. Therefore, the CCN stabilized rambutan-liked Pickering emulsion seemed to be a promising strategy to increase the antibacterial and anti-inflammatory activity of CEO.

Pickering Emulsions as Vehicles for Bioactive Compounds from Essential Oils

Pickering emulsions are emulsion systems stabilized by solid particles at the interface of oil and water. Pickering emulsions are considered to be natural, biodegradable, and safe, so their applications in various fields-such as food, cosmetics, biomedicine, etc.-are very promising, including as a vehicle for essential oils (EOs). These oils contain volatile and aromatic compounds and have excellent properties, such as antifungal, antibacterial, antiviral, and antioxidant activities. Despite their superior properties, EOs are prone to evaporation, decompose when exposed to light and oxygen, and have low solubility, limiting their industrial applications. Several studies have shown that EOs in Pickering emulsions displays less sensitivity to evaporation and oxidation, stronger antibacterial activity, and increased solubility. In brief, the application of Pickering emulsions for EOs is interesting to explore. This review discusses recent progress in the application of Pickering emulsions, particularly as EO carriers, drug carriers, antioxidant and antimicrobial carriers, and in active packaging.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Emulsifying properties and bioavailability of clove essential oil Pickering emulsions stabilized by octadecylaminated carboxymethyl curdlan

In the present study, clove essential oil (CEO) Pickering emulsions were stabilized by octadecylamine-modified carboxymethyl curdlan (CMCD-ODA) at different pH values. The droplet size and negatively charged zeta potential of the CMCD-ODA emulsions decreased as the pH increased from 3.0 to 11.0. Rheology results indicated that the CMCD-ODA polymer/emulsion prepared at pH 5.0 showed higher apparent viscosity and viscoelasticity than other pH conditions, which might prevent droplets from flocculating. The Pickering emulsions obtained at pH 5.0 were spherical droplets with a uniform size distribution and a mean diameter of 9.54 μm, and they exhibited excellent stability during 28 days of storage. The morphological structures of the emulsions investigated by confocal laser scanning microscopy and scanning electron microscopy indicated that the CMCD-ODA Pickering emulsion obtained at pH 5.0 was stabilized by loading amphiphilic CMCD-ODA polymer around the spherical oil droplets and forming a weak gel network structure. The CEO-loaded CMCD-ODA emulsions had higher antioxidant capacity than free CEO after 28 days of storage at pH 5.0. Given the good emulsion stability, antioxidant activity, and great antibacterial effect, the CEO-loaded carboxymethyl curdlan Pickering emulsion has promising applications in food, cosmetic, and biomedicine industries.

Preparation and shape change of silver nanoparticles (AgNPs) loaded on the dialdehyde cellulose by in-situ synthesis method

With the improvement of medical and health care level in our society, the demand for antibacterial materials is increasing. In this work, we prepared the antibacterial materials by loading silver nanoparticles (AgNPs) on the dialdehyde cellulose (DAC) with in-situ synthesis method. DAC was prepared by pretreating cellulose fiber with sodium metaperiodate (NaIO₄) to convert the hydroxyl group into aldehyde group, and then reacted with silver nitrate (AgNO₃) to obtain AgNPs loaded on DAC. UV-Vis results show that the characteristic absorption peak of AgNPs at 428 nm appeared in the AgNPs-loaded-DAC. It was observed by SEM that the spherical AgNPs were distributed uniformly on the DAC surface without obvious flocculation. The color of DAC was not changed significantly, indicating that a small amount of AgNPs was loaded. In addition, sodium citrate (Na₃C₆H₅O₇) was added in the reaction of DAC and AgNO₃ and its effect on the formation of AgNPs was studied. The results demonstrated that the color of DAC turned deeper and finally dark yellow with reaction time extended. When the reaction time was 60 h, the spherical AgNPs were gradually grown and transformed into triangular prism on the DAC surface. The antibacterial properties of AgNPs showed inhibition zones of 4.90 mm and 7.35 mm (60 h) against Gram-negative (E. coli) and Gram-positive (S. aureus), respectively, which increased by 40.00% and 14.85% compared with spherical AgNPs (2.5 h) obtained without Na₃C₆H₅O₇. The research of AgNPs-loaded cellulose-based materials promotes the development prospect of new nano-antibacterial materials.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-022-04692-6.

Recent progress in oil-in-water-in-oil (O/W/O) double emulsions

Oil-in-water-in-oil (O/W/O) double emulsions are recognized as an advanced design route for oil structuring that shows promising applications in the pharmaceutical, cosmetic, and food fields. This review summarizes the main research advances of O/W/O double emulsions over the past two decades. It mainly focuses on understanding the preparation strategies, stabilization mechanism, and potential applications of O/W/O double emulsions. Several emulsification strategies are discussed, including traditional two-step emulsification method, phase-inversion approach, membrane emulsification, and microfluidic emulsification. Further, the role of interfacial stabilizers and viscosity in the stability of O/W/O double emulsions will be discussed with a focus on synthetic emulsifiers, natural biopolymer sand solid particles for achieving this purpose. Additionally, analytical methods for evaluating the stability of O/W/O double emulsions, such as advanced microscopy, rheology, and labeling assay are reviewed taking into account potential limitations of these characterization techniques. Moreover, possible innovative food applications are highlighted, such as simulating fat substitutes to decrease the trans- or saturated fatty acid content and developing novel delivery and encapsulation systems. This review paves a solid way for the exploration of O/W/O double emulsions toward large-scale implementation within the food industry.

Cellulose nanocrystals: Fundamentals and biomedical applications

The present review explores the recent developments of cellulose nanocrystals, a class of captivating nanomaterials in variety of applications. CNCs are made by acid hydrolysing cellulosic materials like wood, cotton, tunicate, flax fibers by sonochemistry. It has many desirable properties, including a high tensile strength, wide surface area, stiffness, exceptional colloidal stability, and the ability to be modified. CNCs are colloidally stable, hydrophilic, and rigid rod-shaped bio-based nanomaterials in the form of rigid rods with high strength and surface area that has a diverse set of applications and properties. The intriguing features emerging from numerous fibers studies, such as renewable character and biodegradability, piqued the curiosity of many researchers who worked on lowering the size of these fibers. Physicochemical properties such as rheological, mechanical, thermal, lipid crystalline, swelling capacity, microstructural properties result in affecting surface-area to volume ratio and crystallinity of cellulose nanocrystals. The present article highlights the fundamentals of cellulose nanocrystals such as sources, isolation, fabrication, properties and surface modification with an emphasis on plethora of biomedical applications. Selected nanocellulose studies with significant findings on cellular labelling and bioimaging, tissue engineering, biosensors, gene delivery, anti-viral property, anti-bacterial property, ocular delivery, modified drug release, anti-cancer activity and enzyme immobilization are emphasized.

Preparation and Characterization of Pickering Emulsions with Modified Okara Insoluble Dietary Fiber

Modified okara insoluble dietary fiber (OIDF) has attracted great interest as a promising Pickering emulsifier. At present, the modification methods are mainly physicochemical methods, and the research on microbial modified OIDF as stabilizer is not clear. In this work, modified OIDF was prepared by yeast Kluyveromyces marxianus fermentation. The potential of modified OIDF as a Pickering emulsifier and the formation and stability of OIDF-Pickering emulsions stabilized by modified OIDF were characterized, respectively. The results showed that the specific surface area, hydrophilicity, and electronegativity of the modified OIDF were all enhanced compared with the unmodified OIDF. The existence of the network structure between droplets is the key to maintain the stability of the emulsions, as indicated by Croy-Scanning Electron Microscope (Croy-SEM) and rheological properties measurements. The stability of OIDF-Pickering emulsions was evaluated in terms of storage time, centrifugal force, pH value, and ionic strength (NaCl). Moreover, the OIDF-Pickering emulsions stabilized by modified OIDF showed better stability. These results will contribute to the development of efficient OIDF-based emulsifiers, expand the application of emulsions in more fields, and will greatly improve the high-value utilization of okara by-products.

Cinnamon Essential Oil Nanocellulose-Based Pickering Emulsions: Processing Parameters Effect on Their Formation, Stabilization, and Antimicrobial Activity

This work aimed to prepare nanocellulose-based Pickering emulsions using cinnamon essential oil. Different formulations were investigated by varying the preparation time, homogenization speed, oil and nanocellulose concentration, and morphology. The emulsions were first characterized by droplet size, morphologies, and storage stability. The Design of Experiments (DoE) was used to evaluate the parameter’s effects on the emulsions’ stability, and the emulsions with optimum particle size and stability were evaluated by antimicrobial activity. The more stable emulsions required higher energy in the system to obtain efficient emulsification. The cellulose nanocrystal (CNC) emulsions showed a 30% oil volume as a constant to obtain a low creaming index (34.4% and 42.8%) and zeta potential values around −29 mV, indicating an electrostatic stabilization. The cellulose nanofiber (CNF) emulsions showed 100% stability after a month using a 20% oil volume as a constant and Zeta potential values around −15 mV, indicating a steric stabilization. CNF-emulsions’ inhibition halos for Bacilus subtilis were 30.1 ± 3.7% smaller than those found in CNC-emulsions (65 ± 2.9 mm), while Pseudomonasaeruginosas almost do not present differences in the inhibition halos. These results suggest that the nanocellulose morphology may promote a regulation on the EO migration to the medium, as well that this migration ratio does not affect the bacteria.