Facile in situ fabrication of ZnO-embedded cellulose nanocomposite films with antibacterial properties and enhanced mechanical strength via hydrogen bonding interactions

Multifunctional composite films with regenerated cellulose prepared via acid-catalytic degradation for in-situ growth of ZnO

Regenerated cellulose is extensively utilized as a natural polymer due to its actually natural piezoelectric properties as well as renewable properties, but suffers from processing difficulties and low piezoelectric constants (d33). Consequently, this work focuses on controlling the molecular weight of regenerated cellulose through pretreatment methods that promote the growth of in situ ZnO to enhance its d33. Firstly, the acid-catalyzed pulp fibers (PF) and zinc nitrate hexahydrate were added in NaOH/urea solvent to effectively prepare RC/ZnO composite film via regeneration and in-situ growth. The effects of the acid-catalytic degradation on the solubility of PF, the structure of RC, and the RC/ZnO composite film were systematically discussed. It is found that the hydrogen bond network structure in the RC/ZnO composite film prepared by 1.5 % ~ 6 h treated PF is the most regular, where the ZnO is well combined with substrate and dispersed evenly, and the d33 is up to 34.99 pm/V. Therefore, the maximum open-circuit voltage of the prepared piezoelectric generator (PEG) reaches 5 V. On this basis, a piezoelectric sensing system is developed, displaying portable and accurate detection performance to human movement. This work provides insights and ideas for the development and design of cellulose and ZnO composites.

Sustainable photocatalytic degradation of antibiotic norfloxacin using microfibrillated cellulose@ZnO nanocomposites

Antibiotics from the fluoroquinolone class, such as norfloxacin (NOR), are emerging contaminants with significant environmental and human health impacts. Their safe degradation from water remains a global challenge due to their persistence, lack of biodegradability, and ability to induce resistant bacteria. To the best of our knowledge, for the first time, this work reports the development of highly efficient photocatalytic degradation of NOR using environmentally friendly microfibrillated cellulose@ZnO (MFC@ZnO) photocatalysts. Immobilization of ZnO nanoparticles on MFC has played a crucial role in controlling the particle dimensions of ZnO, keeping them around tens of nanometers. The impact of radiation (UV-A, UV-C, and simulated solar light) on NOR degradation efficiency was investigated. Additionally, the effects of catalyst dosage (0.125-0.5 g L⁻1), NOR concentration (5-20 mg L⁻1), and degradation pH (pH = 5 to 10) were investigated. LC-MS was used to identify degradation intermediates. The results showed over 94% degradation in 40 min via UV-Vis and 90% in 10 min via HPLC, and recyclability tests indicated MFC0.1@ZnO composites can maintain over 95% NOR degradation efficiency after five consecutive 60-min cycles. The highest NOR degradation efficiency was achieved in a significantly reduced time among metal oxide semiconductors (MOS)-based photocatalysts, thus opening new perspectives for the development of eco-friendly photocatalysts, especially towards emerging pollutant degradation.

Cellulose-citric acid-chitosan@metal sulfide nanocomposites: Methyl orange dye removal and antibacterial activity

In this study, to develop efficient adsorbents in removing water pollution, new cellulose-citric acid-chitosan@metal sulfide nanocomposites (CL-CA-CS@NiS and CL-CA-CS@CuS) were synthesized by one-pot reaction at mild conditions and characterized using X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), Energy Dispersive X-ray (EDX) and Brunauer-Emmett-Teller (BET) isotherm. The results of characterization techniques confirm that the desired compounds have been successfully synthesized. The as-prepared composites were applied for the removal of methyl orange (MO) dye from aqueous solutions using a batch technique, and the effect of key factors such as initial pH, shaking time, MO concentration, temperature and adsorbent dose were investigated and discussed. Adsorption results exhibited positive impact of temperature, shaking time and adsorbent dose on the MO removal percent. The MO removal percent has been increased over a wide range of pH from 2 (27.6 %) to 6 (98.8 %). Also, almost being constant over a wide range of MO concentration (10-70 mg/L). The results demonstrated that the maximum removal percentage of MO dye (98.9 % and 93.4 % using CL-CA-CS@NiS and CL-CA-CS@CuS, respectively) was achieved under the conditions of pH 6, shaking time of 120 min, adsorbent dose of 0.02 g, MO concentration of 70 mg/L and temperature of 35 °C. The pseudo-second-order (PSO) and Langmuir models demonstrated the best fit to the kinetic and equilibrium data. Also, the thermodynamic results showed that the MO removal process is endothermic and spontaneous in nature. The MO adsorption can be happened by different electrostatic attraction, n-π and π-π stacking and also hydrogen bonding interaction. In addition, antibacterial activity of CL-CA-CS@NiS and CL-CA-CS@CuS nanocomposites exhibited a superior efficiency against S. aureus.

Enhancement of Visible Light Antibacterial Activities of Cellulose Fibers from Lotus Petiole Decorated ZnO Nanoparticles

Cellulose/ZnO (CZ) nanocomposites are promising antimicrobial materials known for their antibiotic-free nature, biocompatibility, and environmental friendliness. In this study, cellulose fibers extracted from lotus petioles were utilized as a substrate and decorated with various shapes of ZnO nanoparticles (NPs), including small bean, hexagonal ingot-like, long cylindrical, and hexagonal cylinder-shaped NPs. Increasing zinc salt molar concentration resulted in highly crystalline ZnO NPs forming and enhanced interactions between ZnO NPs and -OH groups of cellulose. The thermal stability and UV-visible absorption properties of the CZ samples were influenced by ZnO concentration. Notably, at a ZnO molar ratio of 0.1, the CZ 0.1 sample demonstrated the lowest weight loss, while the optical band gap gradually decreased from 3.0 to 2.45 eV from the CZ 0.01 to CZ 1.0 samples. The CZ nanocomposites exhibited remarkable antibacterial activity against both Staphylococcus aureus (S. aureus, Gram-positive) and Escherichia coli (E. coli, Gram-negative) bacteria under visible light conditions, with a minimum inhibitory concentration (MIC) of 0.005 mg/mL for both bacterial strains. The bactericidal effects increased with higher concentrations of ZnO NPs, even achieving 100% inhibition. Incorporating ZnO NPs onto cellulose fibers derived from lotus plants presents a promising avenue for developing environmentally friendly materials with broad applications in antibacterial and environmental fields.

Antimicrobial and hydrophobic cellulose paper prepared by covalently attaching cinnamaldehyde for strawberries preservation

The demand for paper-based packaging materials as an alternative to incumbent disposable petroleum-derived polymers for food packaging applications is ever-growing. However, typical paper-based formats are not suitable for use in unconventional applications due to inherent limitations (e.g., excessive hydrophilicity, lack antimicrobial ability), and accordingly, enabling new capabilities is necessity. Herein, a simple and environmentally friendly strategy was proposed to introduce antimicrobial and hydrophobic functions to cellulose paper through successive chemical grafting of 3-aminopropyltriethoxysilane (APS) and cinnamaldehyde (CA). The results revealed that cellulose paper not only showed long-term antibacterial effect on different bacteria, but also inhibited a wide range of fungi. Encouragingly, the modified paper, which is fluorine-free, displays a high contact angle of 119.7°. Thus, even in the wet state, the modified paper can still maintain good mechanical strength. Meanwhile, the multifunctional composite papers have excellent biocompatibility and biodegradability. Compared with ordinary cellulose paper, multifunctional composite paper can effectively prolong the shelf life of strawberries. Therefore, the multifunctional composite paper represents good application potential as a fruit packaging material.

Transparent regenerated cellulose film containing azobenzene group with reversible stimulus discoloration property

The cellulose film, exhibiting color alterations in response to external stimuli, presents itself as a promising functional material. In this study, a universal dissolution-regeneration technique was employed to manufacture a transparent, regenerated cellulose film, characterized by its reversible multi-stimulus discoloration property. This functional cellulose film, endowed with both photochromic and acid-chromic attributes, was synthesized through the introduction of a cellulose-grafted azobenzene derivative into the cellulose solution. The hue of a cellulose film irradiated with ultraviolet light could be inverted upon exposure to visible light or heat. Furthermore, when subject to heating, irradiation, or immersion in an acidic medium, this functional film demonstrated pronounced transparency. The acid-chromic behavior of the film was readily discernible when exposed to highly concentrated acidic aqueous solutions. Both the photochromic and acid-chromic phenomena were discernable to the unaided eye. After ten cycles, no fading of the reversible discoloration properties of the material occurred. This transparent regenerated cellulose film stands as a viable candidate for applications in optical data storage, intelligent switches, and sensors, owing to its capacity for reversible stimulus-triggered discoloration.

Robust and versatile superhydrophobic cellulose-based composite film with superior UV shielding and heat-barrier performances for sustainable packaging

Replacing single-use plastic delivery bags (SPDBs) with cellulose-based materials is an effective strategy to reduce environmental pollution. However, the inherent hydrophilicity and ultralow mechanical strength of cellulose materials limit its development. In this study, zinc oxide (ZnO)-cellulose composite films were successfully prepared through "two-step strategy" of lotus leaves structure simulation, including deposition of micro-nano ZnO particles and stearic acid (STA) modification. Well-dispersed micro-nano ZnO particles with stick-like structure were anchored in the ZnO-cellulose composite film prepared at 90 °C (CF-90). Due to the special structural design and strong interaction between the cellulose and micro-nano ZnO particles, the CF-90 showed higher mechanical property (a 47.8 % improvement in the tensile strength). Impressively, CF-90 also exhibited great UV shielding properties with larger UPF value of 1603.98 and superhigh heat-barrier performance. Moreover, CF-90 obtained excellent superhydrophobicity with a water contact angle of 163.6° by further modification. Consequently, the versatile cellulose-based material bringing a dawn on application of sustainable packaging materials for express delivery industry.

Fabrication of transparent cellulose nanofibril composite film with smooth surface and ultraviolet blocking ability using hydrophilic lignin

Ecofriendly multifunctional films with only biomass-based components have gathered significant interest from researchers as next-generation materials. Following this trend, a TEMPO-oxidized cellulose nanofibril (TOCNF) film containing hydrophilic lignin (CL) was fabricated. To produce the lignin, peracetic acid oxidation was carried out, leading to the introduction of carboxyl groups into the lignin structure. By adding hydrophilic lignin, various characteristics (e.g., surface smoothness, UV protection, antimicrobial activity, and barrier properties) of the TOCNF film were enhanced. In particular, the shrinkage of CNF was successfully prevented by the addition of CL, which is attributed to the lower surface roughness (Ra) from 18.93 nm to 4.99 nm. As a result, the smooth surface of the TOCNF/CL film was shown compared to neat TOCNF film and TOCNF/Kraft lignin composite film. In addition, the TOCNF/CL film showed a superior UV blocking ability of 99.9 % with high transparency of 78.4 %, which is higher than that of CNF-lignin composite films in other research. Also, water vapor transmission rate was reduced after adding CL to TOCNF film. Consequently, the developed TOCNF/CL film can be potentially utilized in various applications, such as food packaging.

Cellulose/inorganic nanoparticles-based nano-biocomposite for abatement of water and wastewater pollutants

Nanostructured materials offer a significant role in wastewater treatment with diminished capital and operational expense, low dose, and pollutant selectivity. Specifically, the nanocomposites of cellulose with inorganic nanoparticles (NPs) have drawn a prodigious interest because of the extraordinary cellulose properties, high specific surface area, and pollutant selectivity of NPs. Integrating inorganic NPs with cellulose biopolymers for wastewater treatment is a promising advantage for inorganic NPs, such as colloidal stability, agglomeration prevention, and easy isolation of magnetic material after use. This article presents a comprehensive overview of water treatment approaches following wastewater remediation by green and environmentally friendly cellulose/inorganic nanoparticles-based bio-nanocomposites. The functionalization of cellulose, functionalization mechanism, and engineered hybrid materials were thoroughly discussed. Moreover, we also highlighted the purification of wastewater through the composites of cellulose/inorganic nanoparticles via adsorption, photocatalytic and antibacterial approach.

Cellulosic fiber nanocomposite application review with zinc oxide antimicrobial agent nanoparticle: an opt for COVID-19 purpose

Cellulosic fiber (CF) in nanoform is emergingly finding its way for COVID-19 solution for instance via nanocomposite/nanoparticle from various abundant biopolymeric waste materials, which may not be widely commercialized when the pandemic strikes recently. The possibility is wide open but needs proper collection of knowledge and research data. Thus, this article firstly reviews CF produced from various lignocellulosic or biomass feedstocks' pretreatment methods in various nanoforms or nanocomposites, also serving together with metal oxide (MeO) antimicrobial agents having certain analytical reporting. CF-MeO hybrid product can be a great option for COVID-19 antimicrobial resistant environment to be proposed considering the long-established CF and MeO laboratory investigations. Secondly, a preliminary pH investigation of 7 to 12 on zinc oxide synthesis discussing on Fouriertransform infrared spectroscopy (FTIR) functional groups and scanning electron microscope (SEM) images are also presented, justifying the knowledge requirement for future stable nanocomposite formulation. In addition to that, recent precursors suitable for zinc oxide nanoparticle synthesis with emergingly prediction to serve as COVID-19 purposes via different products, aligning with CFs or nanocellulose for industrial applications are also reviewed.

Composite cassava starch/chitosan/Pineapple Leaf Fiber (PALF)/Zinc Oxide (ZnO): Bioplastics with high mechanical properties and faster degradation in soil and seawater

Biopolymers based on starch, cellulose and proteins extracted directly from biomass with or without modification have been widely used as the natural resources to produce biodegradable plastic. Starch has several disadvantages: strong hydrophilic behavior and inferior mechanical properties when compared with synthetic polymers. Starch is also mostly soluble in water and will be decomposed before undergoing the gelatinization process. To provide resistance and mechanical strength of starch, several fillers (reinforcement) in the form of metal and natural materials are usually added to the polymer matrix. Zinc oxide (ZnO) nanoparticle and natural fiber as a lightweight material that is biocompatible, nontoxic, cost-effective and exhibit strong antibacterial activity can be considered as a reinforcement of starch-based bioplastic. The present study, the reinforcing effect of ZnO on the mechanical, antibacterial, and physical properties of bioplastic films in the form of cassava starch/chitosan/pineapple leaf fiber (PALF)/ZnO. The highest value of elongation at break is for 16 % ZnO-bioplastics which could be completely decomposed only 21 days in ordinary soil and only 18 days in seawater. The packaging tests using slice bread showed antimicrobial properties with no fungal growth for 30 days of bioplastic coatings with 10, 13, and 16 % ZnO NPs. The results in this study indicated that, the ZnO and PALF plays an important role in reinforcing the physical, mechanical, and antibacterial properties of starch/chitosan/PALF-based bioplastic.

Preparation and characterization of chitosan films incorporating epigallocatechin gallate: Microstructure, physicochemical, and bioactive properties

Novel chitosan films incorporating epigallocatechin gallate (EGCG) were prepared and demonstrated the ideal physical and mechanical properties required of candidate food packaging materials alongside desirable antioxidant and antibacterial activity. Compared with traditional chitosan films, chitosan films incorporated with EGCG were thicker, had higher tensile strength and water solubility, and had lower elongation at break, moisture content, degree of swelling, and water contact angles. Although EGCG-containing films were slightly darker in color than pure chitosan films, they exhibited a greater inhibitory effect on light-induced oxidation with obviously improved UV-vis barrier capability and opacity. Scanning electron microscopy results suggested that EGCG-incorporated samples had a rougher surface structure. This was further confirmed by atomic force microscopy and indicated that the addition of EGCG facilitated the formation of protective barriers through the interaction between the film and food surface. FTIR spectroscopy confirmed that EGCG interacted with chitosan by intermolecular hydrogen bonding and effectively improved the thermal stability of chitosan films. Notably, the incorporation of EGCG significantly enhanced the antioxidant and antibacterial activity of chitosan films. Hence, chitosan films incorporating EGCG have potential applications in the food industry as a novel active packaging material, especially in preventing food oxidation and spoilage in perishable foods.

Recent advances in biobased and biodegradable polymer nanocomposites, nanoparticles, and natural antioxidants for antibacterial and antioxidant food packaging applications

Inorganic nanoparticles (NPs) and natural antioxidant compounds are an emerging trend in the food industry. Incorporating these substances in biobased and biodegradable matrices as polysaccharides (e.g., starch, cellulose, and chitosan) and proteins has highlighted the potential in active food packaging applications due to more significant antimicrobial, antioxidant, UV blocking, oxygen scavenging, water vapor permeability effects, and low environmental impact. In recent years, the migration of metal NPs and metal oxides in food contact packaging and their toxicological potential have raised concerns about the safety of the nanomaterials. In this review, we provide a comprehensive overview of the main biobased and biodegradable polymer nanocomposites, inorganic NPs, natural antioxidants, and their potential use in active food packaging. The intrinsic properties of NPs and natural antioxidant actives in packaging materials are evaluated to extend shelf-life, safety, and food quality. Toxicological and safety aspects of inorganic NPs are highlighted to understand the current controversy on applying some nanomaterials in food packaging. The synergism of inorganic NPs and plant-derived natural antioxidant actives (e.g., vitamins, polyphenols, and carotenoids) and essential oils (EOs) potentiated the antibacterial and antioxidant properties of biodegradable nanocomposite films. Biodegradable packaging films based on green NPs-this is biosynthesized from plant extracts-showed suitable mechanical and barrier properties and had a lower environmental impact and offered efficient food protection. Furthermore, AgNPs and TiO₂ NPs released metal ions from packaging into contents insufficiently to cause harm to human cells, which could be helpful to understanding critical gaps and provide progress in the packaging field.

A Facile In Situ Synthesis of Resorcinol-Mediated Silver Nanoparticles and the Fabrication of Agar-Based Functional Nanocomposite Films

The in situ synthesis of silver nanoparticles (AgNPs) was performed using resorcinol and agar to produce agar-based antioxidant and antimicrobial films. AgNPs were regularly dispersed on the film matrix, and their presence improved the thermal stability of films. Additionally, the addition of AgNPs slightly increased the agar-based film’s tensile strength (~10%), hydrophobicity (~40%), and water vapor barrier properties (~20%) at 1.5 wt% of AgNP concentration. The resorcinol also imparted UV-barrier and antioxidant activity to the agar-based film. In particular, the agar-based film containing a higher quantity of AgNPs (>1.0 wt%) was highly effective against the foodborne pathogenic bacteria L. monocytogenes and E. coli. Therefore, agar-based composite films with improved physicochemical and functional properties may be promising for active packaging.

Fabrication and characterization of ZnO nanofilms using extracted pectin of Premna microphylla Turcz leaves and carboxymethyl cellulose

The current study sought to fabricate pectin nano-films from Premna microphylla Turcz (PMTP) leaves using a combination of ZnO-carboxymethyl cellulose. The rheological and physical properties of fabricated nano-ZnO films were studied. Spectroscopy FT-IR, microscopic study (SEM), thermogravimetry (TG), and XRD were applied to characterize the fabricated film. The antibacterial activity of the nanofilm was determined using the antibacterial circle method. The findings showed that the addition of PMTP can reduce the nanofilm color, water solubility/hydrophilicity, air permeability, and ultraviolet light permeability of the nanofilm. Treatment CPN0.5 achieved the optimized Tensile strength (TS) of 4.50 Mpa, significant differences compared to CPN2 (3.99 Mpa) and CPN1 (3.65 Mpa). In addition, treatment CPN1 achieved the lowest WVP value (29.35) compared to the highest value (41.62) achieved by CPN0.5 treatment with no significant differences with CPN3 (29.7) and CPN1 (30.98) treatments. Elongation (E%) at break was the best for each CP10 (74.9) and CPN0.5 (73.03). Moreover, ZnO can enhance the nanofilm activity and the nanofilm water swelling ratio. Furthermore, adding ZnO to the nano-formula improved the antibacterial activity of the fabricated film against Staphylococcus aureus. In sum, nanofilms fabricated of PMTP and ZnO possess promising prospects as antibacterial agents in packaging applications.

Antimicrobial starch/poly(butylene adipate-co-terephthalate) nanocomposite films loaded with a combination of silver and zinc oxide nanoparticles for food packaging

Antimicrobial starch/PBAT films with the combination of silver nanoparticles (AgNPs) and zinc oxide nanoparticles (ZnONPs) were prepared by extrusion blowing. SEM demonstrated the relatively homogeneous distribution of nanoparticles on the fracture surfaces of the nanocomposite films. The incorporation of nanoparticles improved mechanical and barrier properties of the film. The UV-vis spectroscopy revealed that the SP-ZnO(1) film had the highest UV-absorbance. The inhibition effects of the nanocomposite films against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria were observed. The antimicrobial efficiency of SP-Ag(0.8)-ZnO(0.2) and SP-Ag(0.6)-ZnO(0.4) films reached more than 95% within 3 h of contact. The combination of AgNPs and ZnONPs into starch/PBAT blends showed synergistic effects on improving material properties and antimicrobial efficiency of the films. Furthermore, preliminary packaging studies on peaches and nectarines revealed that the antimicrobial films inhibited spoilage of fresh produce and extended their shelf life compared with commercial LDPE packaging films.