Removal of protein wastes by cylinder-shaped NaY zeolite adsorbents decorated with heavy metal wastes

Synthesis of zeolite from industrial wastes: a review on characterization and heavy metal and dye removal

Increasing world population, urbanization, and industrialization have led to an increase in demand in production and consumption, resulting in an increase in industrial solid wastes and pollutant levels in water. These two main consequences have become global problems. The high Si and Al content of solid wastes suggests that they can be used as raw materials for the synthesis of zeolites. In this context, when the literature studies conducted to obtain synthetic zeolites are evaluated, it is seen that hydrothermal synthesis method is generally used. In order to improve the performance of the hydrothermal synthesis method in terms of energy cost, synthesis time, and even product quality, additional methods such as alkaline fusion, ultrasonic effect, and microwave support have been developed. The zeolites synthesized by different techniques exhibit superior properties such as high surface area and well-defined pore sizes, thermal stability, high cation exchange capacity, high regeneration ability, and catalytic activity. Due to these specific properties, zeolites are recognized as one of the most effective methods for the removal of pollutants. The toxic properties of heavy metals and dyes in water and their carcinogenic effects in long-term exposure pose a serious risk to living organisms. Therefore, they should be treated at specified levels before discharge to the environment. In this review study, processes including different methods developed for the production of zeolites from industrial solid wastes were evaluated. Studies using synthetic zeolites for the removal of high levels of health and environmental risks such as heavy metals and dyes are reviewed. In addition, EPMA, SEM, EDX, FTIR, BET, AFM, and 29Si and 27Al NMR techniques, which are characterization methods of synthetic zeolites, are presented and the cation exchange capacity, thermodynamics of adsorption, effect of temperature, and pH are investigated. It is expected that energy consumption can be reduced by large-scale applications of alternative techniques developed for zeolite synthesis and their introduction into the industry. It is envisaged that zeolites synthesized by utilizing wastes will be effective in obtaining a green technology. The use of synthesized zeolites in a wide variety of applications, especially in environmental problems, holds great promise.

Thallium-mediated NO signaling induced lipid accumulation in microalgae and its role in heavy metal bioremediation

Thallium (Tl⁺) is a trace metal with extreme toxicity and is highly soluble in water, posing a great risk to ecological and human safety. This work aimed to investigate the role played by Tl⁺ in regulating lipid accumulation in microalgae and the removal efficiency of Tl⁺. The effect of Tl⁺ on the cell growth, lipid production and Tl⁺ removal efficiency of Parachlorella kessleri R-3 was studied. Low concentrations of Tl⁺ had no significant effect on the biomass of microalgae. When the Tl⁺ concentration exceeded 5 μg L^-1, the biomass of microalgae showed significant decrease. The highest lipid content of 63.65% and lipid productivity of 334.55 mg L^-1 d^-1 were obtained in microalgae treated with 10 and 5 μg L^-1 Tl⁺, respectively. Microalgae can efficiently remove Tl⁺ and the Tl⁺ removal efficiency can reach 100% at Tl⁺ concentrations of 0-25 μg L^-1. The maximum nitric oxide (NO) level of 470.48 fluorescence intensity (1 × 10⁶ cells)^-1 and glutathione (GSH) content of 343.51 nmol g^-1 (fresh alga) were obtained under 5 μg L^-1 Tl⁺ stress conditions. Furthermore, the exogenous donor sodium nitroprusside (SNP) supplemented with NO was induced in microalgae to obtain a high lipid content (59.99%), lipid productivity (397.99 mg L^-1 d^-1) and GSH content (430.22 nmol g^-1 (fresh alga)). The corresponding analysis results indicated that NO could participate in the signal transduction pathway through modulation of reactive oxygen species (ROS) signaling to activate the antioxidant system by increasing the GSH content to eliminate oxidative damage induced by Tl⁺ stress. In addition, NO regulation of ROS signaling may enhance transcription factors associated with lipid synthesis, which stimulates the expression of genes related to lipid synthesis, leading to increased lipid biosynthesis in microalgae. Moreover, it was found that the change in Tl⁺ had little effect on the fatty acid components and biodiesel properties. This study showed that Tl⁺ stress can promote lipid accumulation in microalgae for biodiesel production and simultaneously effectively remove Tl⁺, which provided evidence that NO was involved in signal transduction and antioxidant defense, and improved the understanding of the interrelation between NO and ROS to regulate lipid accumulation in microalgae.

Facile Separation of Cu2+ from Water by Novel Sandwich NaY Zeolite Adsorptive Membrane

Polyethersulfone-sulfonated polyethersulfone (PES-SPES)/NaY zeolite/nylon sandwich structure membranes were prepared and used to adsorb Cu2+ from water. The adsorption kinetics, adsorption isotherm, dynamic adsorption experiment, and reusability were discussed. The experimental data showed that the Langmuir isotherm model, Dubinin–Radushkevich (D-R) isotherm model, and the pseudo-first-order kinetic model can well represent the adsorption of Cu2+ on the membrane, indicating an ion exchange mechanism, with the maximum adsorption capacity of 111.25 mg·g−1. Repeatability experiments show that the sandwich film still has good adsorption performance after five times of adsorption and desorption. The as-prepared membrane showed considerable separation performance in removing Cu2+ from aspirin solution, providing a feasible method to remove heavy metals from drugs.

Kinetic study on methylene blue removal from aqueous solution using UV/chlorine process and its combination with other advanced oxidation processes

This study investigated the kinetic degradation of methylene blue (MB) by a UV/chlorine process and its combination with other advanced oxidation processes. The ∙OH and reactive chlorine species (RCS: Cl∙, ClO∙, etc.) were the primary reactive species, which accounted for 56.7% and 37.6% of MB degradation at pH 7, respectively. The second-order rate constant of Cl∙ towards MB was calculated to be 2.8 × 10⁹ M^-1 s^-1. When the pH increased from 3 to 7, k_MB by ∙OH increased from 0.15 to 0.21 min^-1 before being reduced to 0.11 min^-1 at pH 11. k_MB by RCS continuously reduced from 0.16 to 0.13 min^-1 when the pH was increased to 11. Humic acid (HA), Br^-, and Cl^- inhibited the degradation with k_MB in the order: k_MB (in HA) < k_MB (in Br^-) < k_MB (in Cl^-). HCO₃^- increased k_MB from 0.37 to 0.48 min^-1. The experimental and modeling methods fit well, indicating the effectiveness of using Kintecus® in predicting concentrations of free radicals in complex water matrices. TOC removal was achieved at 60% after 30 min in a control process and it was strongly inhibited by the presence of HA, with 22% removal achieved at 5 mg_c L^-1 HA. UV/chlorine/electrochemical oxidation (UV/chlorine/EO) significantly improves k_MB from 0.37 to 0.94 min^-1 at a high current (240 mA), while UV/chlorine/H₂O₂ decreased k_MB at a low concentration of 0.01 mM H₂O₂ (k_MB decreased by 6.1%). The results indicate that the energy cost for UV irradiation was the main cost in MB treatment in both UV/chlorine and UV/persulfate (UV/PS) processes, accounting for 91% and 84%, respectively.

Studies of Protein Wastes Adsorption by Chitosan-Modified Nanofibers Decorated with Dye Wastes in Batch and Continuous Flow Processes: Potential Environmental Applications

In this study, reactive green 19 dye from wastewater was immobilized on the functionalized chitosan nanofiber membranes to treat soluble microbial proteins in biological wastewater. Polyacrylonitrile nanofiber membrane (PAN) was prepared by the electrospinning technique. After heat treatment, alkaline hydrolysis, and chemically grafted with chitosan to obtain modified chitosan nanofibers (P-COOH-CS), and finally immobilized with RG19 dye, dyed nanofibers were generated (P-COOH-CS-RG19). The synthesis of P-COOH-CS and P-COOH-CS-RG19 are novel materials for protein adsorption that are not deeply investigated currently, with each of the material functions based on their properties in significantly improving the adsorption efficiency. The nanofiber membrane shows good adsorption capacity and great recycling performance, while the application of chitosan and dye acts as the crosslinker in the nanofiber membrane and consists of various functional groups to enhance the adsorption of protein. The dyed nanofibers were applied for the batch adsorption of soluble protein (i.e., lysozyme), and the process parameters including chitosan’s molecular weight, coupling pH, chitosan concentration, dye pH, dye concentration, and lysozyme pH were studied. The results showed that the molecular weight of chitosan was 50 kDa, pH 5, concentration 0.5%, initial concentration of dye at 1 mg/mL dye and pH 12, lysozyme solution at 2 mg/mL at pH 8, and the maximum adsorption capacity was 1293.66 mg/g at a temperature of 318 K. Furthermore, thermodynamic, and kinetic studies suggested that the adsorption behavior of lysozyme followed the Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. The optimal adsorption and desorption conditions based on batch experiments were directly applied to remove lysozyme in a continuous operation. This study demonstrated the potential of dyed nanofibers as an efficient adsorbent to remove approximately 100% of lysozyme from the simulated biological wastewater.

Dynamic Modelling of Enzymatic Hydrolysis of Oil Using Lipase Immobilized on Zeolite

Immobilization has been proposed as a way to simplify the separation and repeated reuse of enzymes, which is essential for their feasible application at industrial scales. However, in their immobilized form, enzyme activity is fully utilized, due primarily to the additional diffusion limitations. Here, the immobilization of lipase on zeolite and its use in catalyzing oil hydrolysis is studied. Adsorption isotherms were investigated, and the data identified the model that best describes the process, which is the Sips model. The adsorption capacity of zeolite was determined as 62.6 mg/g, which is relatively high due to the high porosity of the support. The rate of enzymatic hydrolysis of olive oil, using the immobilized lipase, was determined at a pH of 7 and a temperature of 40 °C and was compared to that when using free enzymes. The results determined the parameters for a diffusion-reaction model. The effects of both the surface reaction and diffusion were found to be significant, with a slightly higher effect from surface reactions.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Adsorption behavior of fluoroquinolone(ciprofloxacin) using zinc oxide impregnated activated carbon prepared from jack fruit peel: Kinetics and isotherm studies

Ciprofloxacin is a pharmaceutical component used for treating various tract infections. This is considered as an emerging contaminant due to the release of unreacted components getting disposed into the water bodies. This component is effectively treated using renewable biomass, which is converted into a useful renewable low-cost adsorbent material. Discarded Jack Fruit Peel (JFP) is used as an activated carbon incorporated with zinc oxide nanocomposite. The prepared activated carbon in this experiment was characterized by determining their functional groups, morphological characters, and nature of the adsorbent material by analyzing the Fourier Transform InfraRed (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and X-ray Diffraction (XRD) characterization. Further, the prepared composite's correlation coefficients and equilibrium sorption of the adsorption process were calculated using Ultra Violet (UV)-Visible Spectroscopy and analyzed with isotherm models (Langmuir model, Freundlich model, and Temkin model) and kinetic models (Pseudo-first-order kinetics, Pseudo-second-order kinetics, Intraparticle diffusion model, and Elovich model). Among the different models, the Zinc oxide impregnated activated carbon show Freundlich Isotherm and Pseudo Second order equation having a maximum correlation with experimental studies indicating double-layer adsorption, which suggests that the process is chemisorption. The operational parameters, including the effect of pH, dosage of activated carbon, and contact time of adsorption was calculated to identify the optimal condition for maximum adsorption.

Cationic Pollutant Removal from Aqueous Solution Using Reduced Graphene Oxide

Reduced graphene oxide (rGO) is one of the most well-known graphene derivatives, which, due to its outstanding physical and chemical properties as well as its oxygen content, has been used for wastewater treatment technologies. Particularly, extra functionalized rGO is widely preferred for treating wastewater containing dyes or heavy metals. Nevertheless, the use of non-extra functionalized (pristine) rGO for the removal of cationic pollutants is not explored in detail or is ambiguous. Herein, pristine rGO—prepared by an eco-friendly protocol—is used for the removal of cationic pollutants from water, i.e., methylene blue (MB) and mercury-(II) (Hg-(II)). This work includes the eco-friendly synthesis process and related spectroscopical and morphological characterization. Most importantly, the investigated rGO shows an adsorption capacity of 121.95 mg g⁻¹ for MB and 109.49 mg g⁻¹ for Hg (II) at 298 K. A record adsorption time of 30 min was found for MB and 20 min for Hg (II) with an efficiency of about 89% and 73%, respectively. The capture of tested cationic pollutants on rGO exhibits a mixed physisorption–chemisorption process. The present work, therefore, presents new findings for cationic pollutant adsorbent materials based on oxidized graphenes, providing a new perspective for removing MB molecules and Hg(II) ions.

A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils

Heavy metal pollution remains a global environmental challenge that poses a significant threat to human life. Various methods have been explored to eliminate heavy metal pollutants from the environment. However, most methods are constrained by high expenses, processing duration, geological problems, and political issues. The immobilization of metals, phytoextraction, and biological methods have proven practical in treating metal contaminants from the soil. This review focuses on the general status of heavy metal contamination of soils, including the excessive heavy metal concentrations in crops. The assessment of the recent advanced technologies and future challenges were reviewed. Molecular and genetic mechanisms that allow microbes and plants to collect and tolerate heavy metals were elaborated. Tremendous efforts to remediate contaminated soils have generated several challenges, including the need for remediation methodologies, degrees of soil contamination, site conditions, widespread adoptions and various possibilities occurring at different stages of remediation are discussed in detail.