Production of polyhydroxyalkanoates by a moderately halophilic bacterium of Salinivibrio sp. TGB10

Microbial production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), from lab to the shelf: A review

Polyhydroxyalkanoates (PHAs) are natural biopolyesters produced by microorganisms that represent one of the most promising candidates for the replacement of conventional plastics due to their complete biodegradability and advantageous material properties which can be modulated by varying their monomer composition. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] has received particular research attention because it can be synthesized based on the same microbial platform developed for poly(3-hydroxybutyrate) [P(3HB)] without much modification, with as high productivity as P(3HB). It also offers more useful mechanical and thermal properties than P(3HB), which broaden its application as a biocompatible and biodegradable polyester. However, a significant commercial disadvantage of P(3HB-co-3HV) is its rather high production cost, thus many studies have investigated the economical synthesis of P(3HB-co-3HV) from structurally related and unrelated carbon sources in both wild-type and recombinant microbial strains. A large number of metabolic engineering strategies have also been proposed to tune the monomer composition of P(3HB-co-3HV) and thus its material properties. In this review, recent metabolic engineering strategies designed for enhanced production of P(3HB-co-3HV) are discussed, along with their current status, limitations, and future perspectives.

The production, recovery, and valorization of polyhydroxybutyrate (PHB) based on circular bioeconomy

As an energy-storage substance of microorganisms, polyhydroxybutyrate (PHB) is a promising alternative to petrochemical polymers. Under appropriate fermentation conditions, PHB-producing strains with metabolic diversity can efficiently synthesize PHB using various carbon sources. Carbon-rich wastes may serve as alternatives to pure sugar substrates to reduce the cost of PHB production. Genetic engineering strategies can further improve the efficiency of substrate assimilation and PHB synthesis. In the downstream link, PHB recycling strategies based on green chemistry concepts can replace PHB extraction using chlorinated solvents to enhance the economics of PHB production and reduce the potential risks of environmental pollution and health damage. To avoid carbon loss caused by biodegradation in the traditional sense, various strategies have been developed to degrade PHB waste into monomers. These monomers can serve as platform chemicals to synthesize other functional compounds or as substrates for PHB reproduction. The sustainable potential and cycling value of PHB are thus reflected. This review summarized the recent progress of strains, substrates, and fermentation approaches for microbial PHB production. Analyses of available strategies for sustainable PHB recycling were also included. Furthermore, it discussed feasible pathways for PHB waste valorization. These contents may provide insights for constructing PHB-based comprehensive biorefinery systems.

Recent Challenges and Trends of Polyhydroxyalkanoate Production by Extremophilic Bacteria Using Renewable Feedstocks

Polyhydroxyalkanoates (PHAs) are biodegradable polymers with immense potential in addressing the global plastic pollution crisis and advancing sustainable bioplastics production. Among the various microbes known for PHA production, extremophilic bacteria possess unique capabilities to thrive under extreme conditions, making them attractive candidates for PHA synthesis. Furthermore, the utilization of renewable feedstocks for PHA production aligns with the growing demand for sustainable bioplastic alternatives. A diverse range of extremophilic bacteria, especially halophiles and thermophiles, has provided cost-competitive platforms for producing customized PHA polymers. Extremophilic bacteria offer unique advantages over mesophiles due to their contamination resistance, high cell density growth, and unique culture conditions. The current status of Halomonas spp. as a chassis further allows exploration of metabolic engineering approaches to overcome the challenges associated with current industrial biotechnology. This article especially focuses on extremophilic bacteria and explores recent advances in utilizing renewable feedstocks such as lignocellulosic biomass, agro-industrial residues, and waste streams for PHA production. The integration of biorefinery concepts and circular economy principles in PHA manufacturing is also examined. This review is an attempt to provide an understanding of renewable substrates as feedstocks and emerging trends in PHA production by extremophilic bacteria. It underscores the pivotal role of extremophiles and sustainable feedstock sources in advancing the feasibility and eco-friendliness of PHAs as a promising biopolymer alternative.

Avocado seed waste bioconversion into poly(3-hydroxybutyrate) by using Cobetia amphilecti and ethyl levulinate as a green extractant

The avocado processing industry produces up to 1.3M tons of agro-waste annually. Chemical analysis of avocado seed waste (ASW) revealed that it is rich in carbohydrates (464.7 ± 21.4 g kg^-1) and proteins (37.2 ± 1.5 g kg^-1). Optimized microbial cultivation of Cobetia amphilecti using an acid hydrolysate of ASW, generated poly(3-hydroxybutyrate) (PHB) in a 2.1 ± 0.1 g L^-1 concentration. The PHB productivity of C. amphilecti cultivated on ASW extract was 17.5 mg L^-1 h^-1. The process in which a novel ASW substrate was utilized has been further augmented by using ethyl levulinate as a sustainable extractant. This process achieved 97.4 ± 1.9 % recovery yield and 100 ± 1 % purity (measured by TGA, NMR, and FTIR) of the target PHB biopolymer, along with a high and relatively uniform PHB molecular weight (M_w = 1831 kDa, M_n = 1481 kDa, M_w/M_n = 1.24) (measured by gel permeation chromatography), compared to PHB polymer extracted by chloroform (M_w = 389 kDa, M_n = 297 kDa, M_w/M_n = 1.31). This is the first example of ASW utilization as a sustainable and inexpensive substrate for PHB biosynthesis and ethyl levulinate as an efficient and green extractant of PHB from a single bacterial biomass.

In-silico analysis of a halophilic bacterial isolate-Bacillus pseudomycoides SAS-B1 and its polyhydroxybutyrate production through fed-batch approach under differential salt conditions

Polyhydroxybutyrate (PHB) is a natural biopolymer and a viable substitute for petroleum-derived polymers that possess immense potential for diverse applications. In the present study, PHB was produced by a halophilic bacteria identified as Bacillus pseudomycoides SAS-B1 by 16S rRNA gene sequencing. The bacterial genome was evaluated through complete genome sequencing, which elucidated a 5,338,308 bp genome with 34.88 % of G + C content and 5660 genes. Other genome attributes were analyzed such as functional profiling, gene ontology, and metabolic pathways. Genes involved in PHB biochemical pathway were identified such as phaA, phaB, and phaC. Furthermore, sodium-dependent transporters and other ATP-binding genes were identified in the genome that may be involved in sodium uptake during saline conditions. The PHB production by B. pseudomycoides SAS-B1 was examined under differential salt conditions. The PHB yield was increased from 3.14 ± 0.02 g/L to 6.12 ± 0.04 g/L when salinity was increased upto 20 g/L with intermittent feeding of glucose and corn steep liquor. FTIR, NMR, and GC-MS studies elucidated the presence of desired functional groups, molecular structure, and monomeric compositions of PHB respectively. Further, TGA revealed the thermal stability of the recovered PHB upto (220-230) °C and has a crystallinity index of upto 33 ± 0.5 % as confirmed by XRD analysis.

Effect of levulinic acid on production of polyhydroxyalkanoates from food waste by Haloferax mediterranei

Polyhydroxyalkanoates (PHA), especially poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is considered as the most suitable candidate to replace petrochemical plastics. However, the high production cost and the composition of the monomers in the copolymer are the major constraints in production. The 3-hydroxyvalerate (3HV) rich copolymers are ideal for various applications due to their lower melting points, improved elasticity, and ductility. Haloferax mediterranei is a suitable microorganism for the production of biopolymer PHBV from biowaste. Nevertheless, the potential of H. mediterranei cultivated on food waste as sustainable substrate and levulinic acid as an inducer has not been explored for PHBV production. This study aims at the valorization of food waste as low-cost substrate and evaluation of effect of levulinic acid in the production and composition of PHBV using H. mediterranei. Shake-flask fermentations using different concentrations of salt, glucose and levulinic acid were first performed to optimize the cultivation conditions. The highest growth of the halophile was observed at salt concentration of 15% and glucose of concentration 10 g/L. Under optimized growth conditions, H. mediterranei was cultivated for PHBV production in fed-batch bioreactor with pulse fed levulinic acid. The maximum biomass of 3.19 ± 0.66 g/L was achieved after 140 h of cultivation with 3 g/L of levulinic acid. A decrease in H. mediterranei growth was noticed with the increase in levulinic acid concentration in the range of 3-10 g/L. The overall yield of PHBV at 3, 5, 7 and 10 g/L of levulinic acid were 18.23%, 56.70%, 31.54%, 21.29%, respectively. The optimum concentration of 5 g/L of levulinic acid was found to produce the maximum yield of 56.70% PHBV with 18.55 mol% 3HV content. A correlation between levulinic acid concentrations and PHBV production established in this study can serve as an important reference for future large-scale production.

Efficient production of poly-3-hydroxybutyrate from acetate and butyrate by halophilic bacteria Salinivibrio spp. TGB4 and TGB19

Volatile fatty acids (VFAs) derived from biomass are considered to be economical and environmentally friendly feedstocks for microbial fermentation. Converting VFAs to polyhydroxyalkanoate (PHA) could reduce the substrate cost and provide an economically viable route for the commercialization of PHA. The halophilic bacteria Salinivibrio spp. TGB4 and TGB19, newly isolated from salt fields, were found to accumulate poly-3-hydroxybutyrate (PHB) using acetate or butyrate as the substrate. Both strains exhibited considerable cell growth (OD₆₀₀ of ~8) even at acetate concentration of 100 g/L. In shake flask cultures, TGB4 produced PHB titers of 0.90 and 1.34 g/L, while TGB19 produced PHB titers of 0.25 and 2.53 g/L with acetate and butyrate, respectively. When acetate and butyrate were both applied, PHB production was significantly increased, and the PHB titer of TGB4 and TGB19 reached 6.14 and 6.84 g/L, respectively. After optimizing the culture medium, TGB19 produced 8.42 g/L PHB, corresponding to 88.55 wt% of cell dry weight. During fed-batch cultivation, TGB19 produced a PHB titer of 53.23 g/L. This is the highest reported PHB titer using acetate and butyrate by pure microbial cultures and would provide promising hosts for the industrial production of PHA from VFAs.

Production of polyhydroxyalkanoates by three novel species of Marinobacterium

Several species of novel marine bacteria from the genus Marinobacterium, including M. nitratireducens, M. sediminicola, and M. zhoushanense were found to be capable of producing polyhydroxyalkanoates (PHA) using sugars and volatile fatty acids (VFAs) as the carbon source. M. zhoushanense produced poly-3-hydroxybutytate (PHB) from sucrose, achieving a product titer and PHB content of 2.89 g/L and 64.05 wt%, respectively. By contrast, M. nitratireducens accumulated 3.38 g/L PHB and 66.80 wt% polymer content using butyrate as the substrate. A third species, M. sediminicola showed favorable tolerance to propionate, butyrate, and valerate. The use of 10 g/L valerate yielded 3.37 g/L poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), with a 3-hydroxyvalerate (3 HV) monomer content of 94.75 mol%. Moreover, M. sediminicola could be manipulated to produce PHBV with changeable polymer compositions by feeding different mixtures of VFAs. Our results indicate that M. sediminicola is a promising halophilic bacterium for the production of PHA.

A Polyhydroxyalkanoates-Based Carrier Platform of Bioactive Substances for Therapeutic Applications

Bioactive substances (BAS), such as small molecule drugs, proteins, RNA, cells, etc., play a vital role in many therapeutic applications, especially in tissue repair and regeneration. However, the therapeutic effect is still a challenge due to the uncontrollable release and instable physico-chemical properties of bioactive components. To address this, many biodegradable carrier systems of micro-nano structures have been rapidly developed based on different biocompatible polymers including polyhydroxyalkanoates (PHA), the microbial synthesized polyesters, to provide load protection and controlled-release of BAS. We herein highlight the developments of PHA-based carrier systems in recent therapeutic studies, and give an overview of its prospective applications in various disease treatments. Specifically, the biosynthesis and material properties of diverse PHA polymers, designs and fabrication of micro- and nano-structure PHA particles, as well as therapeutic studies based on PHA particles, are summarized to give a comprehensive landscape of PHA-based BAS carriers and applications thereof. Moreover, recent efforts focusing on novel-type BAS nano-carriers, the functionalized self-assembled PHA granules in vivo, was discussed in this review, proposing the underlying innovations of designs and fabrications of PHA-based BAS carriers powered by synthetic biology. This review outlines a promising and applicable BAS carrier platform of novelty based on PHA particles for different medical uses.

Production of Polyhydroxyalkanoates (PHAs) by Vibrio alginolyticus Strains Isolated from Salt Fields

Vibrio alginolyticus is a halophilic organism usually found in marine environments. It has attracted attention as an opportunistic pathogen of aquatic animals and humans, but there are very few reports on polyhydroxyalkanoate (PHA) production using V. alginolyticus as the host. In this study, two V. alginolyticus strains, LHF01 and LHF02, isolated from water samples collected from salt fields were found to produce poly(3-hydroxybutyrate) (PHB) from a variety of sugars and organic acids. Glycerol was the best carbon source and yielded the highest PHB titer in both strains. Further optimization of the NaCl concentration and culture temperature improved the PHB titer from 1.87 to 5.08 g/L in V. alginolyticus LHF01. In addition, the use of propionate as a secondary carbon source resulted in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). V. alginolyticus LHF01 may be a promising host for PHA production using cheap waste glycerol from biodiesel refining.

Structure of the 4-O-[1-Carboxyethyl]-d-Mannose-Containing O-Specific Polysaccharide of a Halophilic Bacterium Salinivibrio sp. EG9S8QL

The moderately halophilic strain Salinivibrio sp. EG9S8QL was isolated among 11 halophilic strains from saline mud (Emisal Salt Company, Lake Qarun, Fayoum, Egypt). The lipopolysaccharide was extracted from dried cells of Salinivibrio sp. EG9S8QL by the phenol–water procedure. The OPS was obtained by mild acid hydrolysis of the lipopolysaccharide and was studied by sugar analysis along with ¹H and ¹³C NMR spectroscopy, including ¹H,¹H COSY, TOCSY, ROESY, ¹H,¹³C HSQC, and HMBC experiments. The OPS was found to be composed of linear tetrasaccharide repeating units of the following structure: →2)-β-Manp4Lac-(1→3)-α-ManpNAc-(1→3)-β-Rhap-(1→4)-α-GlcpNAc-(1→, where Manp4Lac is 4-O-[1-carboxyethyl]mannose.