Characterization of lignin extracted from Acanthopanax senticosus residue using different methods on UV-resistant behavior

In-situ preparation of lignin/Fe3O4 magnetic spheres as bifunctional material for the efficient removal of metal ions and methylene blue

In this paper, magnetic composite of lignin/Fe3O4 spheres were synthesized via a straightforward one-step in-situ solvothermal method showing good capacity for adsorbing heavy metal ions and dyes. The physicochemical properties of lignin/Fe3O4 spheres are analyzed using a range of techniques such as SEM, XRD, FTIR, VSM, TG, and BET. Lignin/Fe3O4 spheres exhibited high adsorption capacities of 100.00, 353.36 and 223.71 and 180.18 mg/g for Cu (II), Ni (II) and Cr (VI) metal ions and methylene blue (MB) with equilibrium attained within 60 min. After the recycling experiments, lignin/Fe3O4 spheres still possesses excellent superparamagnetic properties and displays high adsorption capacity. The lignin/Fe3O4 spheres are an efficient and continuous adsorbent to remove heavy metal ions of Cu (II), Ni (II), Cr (VI) and cationic dyes of methylene blue in wastewater, which proves the great potential in practical pollutants treatment applications for water systems.

Controllable synthesis of Fe3C-reinforced petal-like lignin microspheres with boosted electrochemical performance and its application in high performance supercapacitors

One more effective measure to solve the energy crisis caused by the shortage of fossil energy is to convert natural renewable resources into high-value chemical products for electrochemical energy storage. Lignin has broad application prospects in this field. In this paper, three kinds of lignin with different molecular weights were obtained by the ethanol/water grading of Kraft lignin (KL). Then, different surface morphology lignin microspheres were prepared by spray drying. Finally, petal-like microspheres were successfully prepared by mixing and grinding the above four kinds of surface morphology lignin microspheres with potassium ferrate and cyanogen chloride and carbonizing at 800 °C and were later used as electrode materials for supercapacitors. Compared with the other microspheres, LMS-F3@Fe3C has the highest specific surface area (1041.42 m2 g-1), the smallest pore size (2.36 nm) and the largest degree of graphitization (ID/IG = 1.06). At a current density of 1 A g-1, the maximum specific capacitance is 786.7 F g-1. At a power density of 1000 W kg-1, the high energy density of 83.3 Wh kg-1 is displayed. This work provides a novel approach to the modulation of surface morphology and structure of lignin microspheres.

Simple Non-Equilibrium Atmospheric Plasma Post-Treatment Strategy for Surface Coating of Digital Light Processed 3D-Printed Vanillin-Based Schiff-Base Thermosets

A simple non-equilibrium atmospheric plasma post-treatment strategy was developed for the surface coating of three-dimensional (3D) structures produced by digital light processing 3D printing. The influence of non-equilibrium atmospheric plasma on the chemical and physical properties of vanillin-derived Schiff-base thermosets and the dip-coating process was investigated and compared to the influence of traditional post-treatment with UV-light. As a comparison, thermosets without post-treatment were also subjected to the coating procedure. The results document that UV post-treatment can induce the completion of the curing of the printed thermosets if complete curing is not reached during printing. Conversely, the plasma post-treatment does not contribute to the curing of the thermoset but causes some opening of the imine bonds and the regeneration of aldehyde functions. As a consequence, no great differences are observed between the not post-treated and plasma post-treated samples in terms of mechanical, thermal, and solvent-resistant properties. In contrast to the UV post-treatment, the plasma post-treatment of the thermosets induces a noticeable increase of the thermoset hydrophilicity ascribed to the reformation of amines on the thermoset surface. The successful coating process and the greatest uniformity of the lignosulfonate coating on the surface of plasma post-treated samples are considered to be due to the presence of these amines and aldehydes. The investigation of the UV shielding properties and antioxidant activities documents the increase of both properties with the increasing amount and uniformity of the formed coating. Interestingly, evident antioxidant properties are also shown by the noncoated thermosets, which are deduced to their chemical structures.

PBAT/PLA humic acid biodegradable film applied on solar greenhouse tomato plants increased lycopene and decreased total acid contents

This work aims to resolve residual film pollution in farmlands and improve tomato quality. The mechanical properties and degradation of PBAT/PLA lignin (MZS) and PBAT/PLA humic acid (FZS) composite biodegradable film were analyzed, and its effect on soil temperature and humidity, soil microorganisms, soil physical and chemical properties, tomato yield, and quality was studied. Polyethylene film (PE) was used as a control. The results demonstrate a higher degradation degree of FZS film than of MZS film. The degradation degree of FZS and MZS films reached level 2 and level 1, respectively, after 131 days of film covering. The weight loss rate of FZS and MZS films reached 52.74 % and 57.82 %, respectively, when buried for 160 days. Compared to the coverings of PE and MZS films, FZS film could significantly increase the soil's electric conductivity and organic matter content (p < 0.05). The relative abundance of soil fungi Chaetomium also increased. The yield, soluble solids, vitamin C (Vc), soluble sugar, and lycopene of tomato plants covered with FZS film significantly increased by 6.74 %, 8.75 %, 15.41 %, 8.30 %, and 27.27 % compared to plants covered with PE film, and the total acid and hardness significantly decreased by 24.95 % and 8.46 %, respectively (p < 0.05). Using 10 μm PBAT/PLA humic acid biodegradable film for tomato cultivation in autumn and winter increased the lycopene and decreased the total acid content by changing the soil's physical and chemical characteristics and increasing the content of Chaetomium soil.

Recycling utilization of Chinese medicine herbal residues resources: systematic evaluation on industrializable treatment modes

Traditional Chinese medicine (TCM) is an indispensable part of the world health and medical system and plays an important role in treatment, prevention, and health care. These TCM produce a large amount of Chinese medicine herbal residues (CHMRs) during the application process, most of which are the residues after the decoction or extraction of botanical medicines. These CMHRs contain a large number of unused components, which can be used in medical, breeding, planting, materials, and other industries. Considering the practical application requirements, this paper mainly introduces the low-cost treatment methods of CHMRs, including the extraction of active ingredients, cultivation of edible fungi, and manufacture of feed. These methods not only have low upfront investment, but also have some income in the future. Furthermore, other methods are briefly introduced. In conclusion, this paper can provide a reference for people who need to deal with CMHRs and contribute to the sustainable development of TCM.

Physicochemical characteristics of lignin-g-PMMA/PLA blend via atom transfer radical polymerization depending on the structural difference of organosolv lignin

Lignin has different structural characteristics depending on the extraction conditions. In this study, three types of ethanol organosolv lignin (EOL) were produced under different extraction conditions involving the reaction temperature (140, 160, 180 °C), sulfuric acid concentration (0.5, 1, 1.5 %), and ethanol concentration (40, 60, 80 %) to compare the difference in properties when mixed with polylactic acid (PLA) matrix after atom transfer radical polymerization (ATRP). ATRP of EOL was conducted to improve its compatibility with PLA using methyl methacrylate (MMA) as a monomer. The molecular weight of each EOL increased significantly, and the glass transition temperature (T_g) decreased from approximately 150 to 110 °C. The EOL-g-PMMA copolymer exhibited a melting point (T_m), whereas EOL did not, implying that the thermoplasticity increased. The EOL-g-PMMA/PLA blend and film were prepared with 10 % of the copolymer in the PLA matrix. The tensile strength and strain of the blend were higher than those of unmodified organosolv lignin as the compatibility increased, and the UV transmittance was lower than that of neat PLA because of the UV protecting properties of EOL moiety.

Ultrasonic assisted enhanced catalytic effect of perovskite to promote depolymerization of lignin

The search for renewable energy sources to replace fossil fuel has made lignin a promising carbon-containing resource. In this paper, LaNiO₃ perovskite catalyst supported by mesoporous carrier with specific pore structure was prepared by the pore filling of MCM-41 with citrate complex precursors of nickel and lanthanum. Then the catalysts applied to maize straw lignin depolymerization. The results of low-angle XRD, N₂ adsorption-desorption, IR spectroscopy and SEM confirmed that the catalyst has been successfully manufactured. Based on the yield of phenolic monomer, low molecular weight lignin derived bio-oil and high molecular weight lignin derived bio-oil as standard, the catalyst showed best catalytic effect when the reaction temperature was 250 °C, the reaction time was 6 h, the ratio of lignin to catalyst mass was 5: 1 and with ultrasonic assist. The yield of phenolic monomer was 11.46 wt% and that of bio-oil was 68.0 wt%. In general, this method is an excellent embodiment of the principle of Lignin-first as well as an excellent strategy for the production of value-added phenolics and high-quality bio-oils from lignin. It plays an important role in promoting the high value utilization of lignin in the future.

Thermal Characteristics and Simulation of Enzymatic Lignin Isolated from Chinese Fir and Birch

Lignin is one of the main components of the plant cell wall, and the thermal properties of in situ biomass lignin are crucial for the multi-scale modeling of biomass properties and the thermodynamic modeling of lignin. In this study, high yields of double enzymatic lignin (DEL) were successfully isolated from softwood Chinese fir (Cunninghamia lanceolate (Lamb.) Hook.) and hardwood white birch (Betula platyphylla Suk.) to represent the in situ wood lignin. Their thermal properties, including specific heat capacity, thermal conductivity, thermal stability, and thermal degradation kinetic parameters, were tested and simulated. The results showed that Chinese fir DEL has different chemical structural units and thermal properties than birch DEL. The specific heat capacities of Chinese fir DEL and birch DEL at 20 °C were 1301 and 1468 J/(kg·K), respectively, and their thermal conductivities were 0.30 and 0.32 W/(m·K). Their specific heat capacity and thermal conductivity showed a positive linear relationship over a temperature range of 20–120 °C. Chinese fir DEL had a better thermal stability and a higher carbon residue than birch DEL. The average activation energy and pre-exponential factor changed with the conversion rate, and their relationships were simulated using linear or quadratic equations in the conversion rate range of 0.02–0.60. A second-order reaction function was found to be the best mechanism function for DEL thermal degradation.

Optimized preparation of spruce kraft lignin/ZnO composites and their performance analysis in polyurethane films

Spruce kraft lignin (SKL) has received considerable attention in recent years for its application in the field of polymer materials. However, its structural complexity and polydispersity pose significant challenges for commercial applications. In this study, molecular structure models of acetone soluble kraft lignin (ASKL) and acetone insoluble kraft lignin (AIKL) were proposed based on quantitative calculations of the connection mode of functional groups and structural units. The lignin was modified by quaternization and synthesized in situ as lignin/ZnO composites. Based on the detailed characterization of the micromorphology and structure of the composites, waterborne polyurethane (WPU) films were optimally prepared using 0.6 wt% of the composites. The results showed that the composite films prepared from ASKL have the best UV-blocking performance and mechanical properties. The highest UVA and UVB blocking rates were 98% and 100%, respectively, and the highest tensile strength and elongation at break were 31.2 MPa and 732%, respectively. The differences in the structure and functional groups of the different types of SKL were accurately identified. ASKL is advantageous for the development of UV-blocking films because of its low molecular weight and the presence of abundant phenolic hydroxyl groups, which facilitate the formation of hydrogen bonds, improve the compatibility, and ensure uniform dispersibility. The results of this study are of practical importance in the field of nano-functional materials for the high-value application of industrial lignin.

Surface Gelatin-Coated β-Mannanase-Immobilized Lignin for Delayed Release of β-Mannanase to Remediate Guar-Based Fracturing Fluid Damage

Herein, we developed an efficient and convenient method to address the problem of thickener decomposition in the low- permeability oilfield production process. It is crucial to design breakers that reduce viscosity by delaying thickener decomposition in appropriate environments. By using lignin in biomass as a substrate for β-mannanase immobilization (MIL), we fabricated a gel breaker, surface gelatin-coated β-mannanase-immobilized lignin (Ge@MIL). Through experiments and performance tests, we confirmed that the prepared Ge@MIL can release enzymes at a specific temperature, meanwhile having temperature-sensitive phase change properties and biodegradability. The results also show the tight tuning over the surface coating of Ge@MIL by a water-in-oil emulsion. Therefore, the prepared Ge@MIL has a promising application in the field of oil extraction as a green and efficient temperature-sensitive sustained-release capsule.