Enhanced acidic resistance ability and catalytic properties of Bacillus 1,3-1,4-β-glucanases by sequence alignment and surface charge engineering

Enhancing Acid Resistance of Aspergillus niger Pectin Lyase through Surface Charge Design for Improved Application in Juice Clarification

Pectin lyases (PNLs) can enhance juice clarity and flavor by degrading pectin in highly esterified fruits, but their inadequate acid resistance leads to rapid activity loss in juice. This study aimed to improve the acid resistance of Aspergillus niger PNL pelA through surface charge design. A modification platform was established by fusing pelA with a protein tag and expressing the fusion enzyme in Escherichia coli. Four single-point mutants were identified to increase the surface charge using computational tools. Moreover, the combined mutant M6 (S514D/S538E) exhibited 99.8% residual activity at pH 3.0. The M6 gene was then integrated into the A. niger genome using a multigene integration system to obtain the recombinant PNL AM6. Notably, AM6 improved the light transmittance of orange juice to 45.3%, which was 8.39 times higher than that of pelA. In conclusion, AM6 demonstrated the best-reported acid resistance, making it a promising candidate for industrial juice clarification.

Enhancing thermostability of tryptophan hydroxylase via protein engineering and its application in 5-hydroxytryptophan production

5-Hydroxytryptophan (5-HTP), as the precursor of serotonin and melatonin in animals, can regulate mood, sleep, and behavior, which is widely used in pharmaceutical and health products industry. The enzymatic production of 5-hydroxytryptophan (5-HTP) from L-tryptophan (L-Trp) using tryptophan hydroxylase (TPH) show huge potential in application due to its advantages, such as mild reaction conditions, avoidance of protection/deprotection processes, excellent regioselectivity and considerable catalytic efficiency, compared with chemical synthesis and natural extraction. However, the low thermostability of TPH restricted its hydroxylation efficiency toward L-Trp. In this study, we aimed to improve the thermostability of TPH via semi-rational design guided by (folding free energy) ΔΔG fold calculation. After two rounds of evolution, two beneficial mutants M1 (S422V) and M30 (V275L/I412K) were obtained. Thermostability evaluation showed that M1 and M30 possessed 5.66-fold and 6.32-fold half-lives (t1/2) at 37 °C, and 4.2 °C and 6.0 °C higher melting temperature (Tm) than the WT, respectively. The mechanism behind thermostability improvement was elucidated with molecular dynamics simulation. Furthermore, biotransformation of 5-HTP from L-Trp was performed, M1 and M30 displayed 1.80-fold and 2.30-fold than that of WT, respectively. This work provides important insights into the thermostability enhancement of TPH and generate key mutants that could be robust candidates for practical production of 5-HTP.

Improvement of the fibrinolytic activity, acid resistance and thermostability of nattokinase by surface charge engineering

Nattokinase is a promising thrombolytic drug due to its powerful fibrinolytic effect and few side effects. However, the low fibrinolytic activity and stability of nattokinase have limited its industrial production and oral application. In this study, the basic and neutral amino acid residues on the surface of recombinant nattokinase AprY from Bacillus mojavensis LY-06 (rAprY) were mutated to acidic amino acid residues by surface charge engineering strategy, and two variants K12D and N109D with 92.6 % and 8.4 % increased fibrinolytic activity were obtained. The R45E variant with enhanced acid stability and thermostability was also screened, its acid stability at pH 4 and t1/2 at 55 °C were 3.7-fold and 1.8-fold higher than that of wild type rAprY, respectively. Bioinformatics analysis showed that the increased activities of K12D and N109D variants were related to the increased flexibility of the region around their active centers. The increased rigidity of 97-103 amino acid residues around the active center of R45E may be the reason for its enhanced stability and reduced catalytic activity. The multipoint mutation K12D-N109D (M2)'s catalytic activity did not increase cumulatively, but its pH stability did. The nattokinase variants generated in this study have potential for industrial production and application.

Acid-resistant enzymes: the acquisition strategies and applications

Enzymes have promising applications in chemicals, food, pharmaceuticals, and other variety products because of their high efficiency, specificity, and environmentally friendly properties. However, due to the complexity of raw materials, pH, temperature, solvents, etc., the application range of enzymes is greatly limited in the industry. Protein engineering and enzyme immobilization are classical strategies to overcome the limitations of industrial applications. Although the pH tendency of enzymes has been extensively researched, the mechanism underlying enzyme acid resistance is unclear, and a less practical strategy for altering the pH propensity of enzymes has been suggested. This review proposes that the optimum pH of enzyme is determined by the pKa values of active center ionizable amino acid residues. Three levels of acquiring acid-resistant enzymes are summarized: mining from extreme environments and enzyme databases, modification with protein engineering and enzyme microenvironment engineering, and de novo synthesis. The industrial applications of acid-resistant enzymes in chemicals, food, and pharmaceuticals are also summarized. KEY POINTS: • The mechanism of enzyme acid resistance is fundamentally determined. • The three aspects of the method for acquiring acid-resistant enzymes are summarized. • Computer-aided strategies and artificial intelligence are used to obtain acid-resistant enzymes.

Combined Computer-Aided Predictors to Improve the Thermostability of Nattokinase

Food-derived nattokinase has strong thrombolytic activity and few side effects. In the field of medicine, nattokinase has been developed as an adjuvant drug for the treatment of thrombosis, and nattokinase-rich beverages and health foods have also shown great potential in the field of food development. At present, the poor thermostability of nattokinase limits its industrial production and application. In this study, we used several thermostability-prediction algorithms to predict nattokinase from Bacillus mojavensis LY-06 (AprY), and screened two variants S33T and T174V with increased thermostability and fibrinolytic activity. The t1/2 of S33T and T174V were 8.87-fold and 2.51-fold those of the wild type AprY, respectively, and their enzyme activities were also increased (1.17-fold and 1.28-fold, respectively). Although the thermostability of N218L was increased by 2.7 times, the fibrinolytic activity of N218L was only 73.3% of that of wild type AprY. The multiple-point mutation results showed that S33T-N218L and S33T-T174V-N218L variants lost their activity, and the T174V-N218L variant did not show any significant change in catalytic performance, while S33T-T174V increased its thermostability and activity by 21.3% and 24.8%, respectively. Although the S33T-T174V variant did not show the additive effect of thermostability, it combined the excellent transient thermostability of S33T with the better thrombolytic activity of T174V. Bioinformatics analysis showed that the overall structure of S33T and T174V variants tended to be stable, while the structure of S33T-T174V variant was more flexible. Local structure analysis showed that the increased rigidity of the active center region (positions 64-75) and the key loop region (positions 129-130, 155-163, 187-192, 237-241, and 268-270) determined the increased thermostability of all variants. In addition, the enhanced flexibility of S33T-T174V variant in the Ca1 binding region (positions 1-4, 75-82) and the peripheral region of the catalytic pocket (positions 210-216) may account for the inability to superpose its thermostability. We explored the effective strategy to enhance the thermostability of nattokinase, and the resulting variants have potential industrial production and application.

Inactivation and process intensification of β-glucosidase in biomass utilization

Lignocellulosic biomass has emerged as a promising environmental resource. Enzyme catalysis, as one of the most environmentally friendly and efficient tools among various treatments, is used for the conversion of biomass into chemicals and fuels. Cellulase is a complex enzyme composed of β-glucosidase (BGL), endo-β-1,4-glucanase (EG), and exo-β-1,4-glucanase (CBH), which synergistically hydrolyzes cellulose into monosaccharides. BGL, which further deconstructs cellobiose and short-chain cellooligosaccharides obtained by EG and CBH catalysis into glucose, is the most sensitive component of the synergistic enzyme system constituted by the three enzymes and is highly susceptible to inactivation by external conditions, becoming the rate-limiting component in biomass conversion. This paper firstly introduces the source and catalytic mechanism of BGL used in the process of biomass resource utilization. The focus is on the review of various factors affecting BGL activity during hydrolysis, including competitive adsorption of lignin, gas-liquid interface inactivation, thermal inactivation, and solvent effect. And the methods to improve BGL inactivation are proposed from two aspects-substrate initiation and enzyme initiation. In particular, the screening, modification, and alteration of the enzyme molecules themselves are discussed with emphasis. This review can provide novel ideas for studies of BGL inactivation mechanism, containment of inactivation, and activity enhancement. KEY POINTS: • Factors affecting β-glucosidase inactivation are described. • Process intensification is presented in terms of substrate and enzyme. • Solvent selection, protein engineering, and immobilization remain topics of interest.

Microbial β-glucanases: production, properties, and engineering

Lignocellulosic biomass, which mainly consists of cellulose and hemicellulose, is the most abundant renewable biopolymer on earth. β-Glucanases are glycoside hydrolases (GHs) that hydrolyze β-glucan, one of the dominant components of the plant cell wall, into cello-oligosaccharides and glucose. Among them, endo-β-1,4-glucanase (EC 3.2.1.4), exo-glucanase/cellobiohydrolase (EC 3.2.1.91), and β-glucosidase (EC 3.2.1.21) play critical roles in the digestion of glucan-like substrates. β-Glucanases have attracted considerable interest within the scientific community due to their applications in the feed, food, and textile industries. In the past decade, there has been considerable progress in the discovery, production, and characterization of novel β-glucanases. Advances in the development of next-generation sequencing techniques, including metagenomics and metatranscriptomics, have unveiled novel β-glucanases isolated from the gastrointestinal microbiota. The study of β-glucanases is beneficial for research and development of commercial products. In this study, we review the classification, properties, and engineering of β-glucanases.

Possibilities of Using De Novo Design for Generating Diverse Functional Food Enzymes

Food enzymes have an important role in the improvement of certain food characteristics, such as texture improvement, elimination of toxins and allergens, production of carbohydrates, enhancing flavor/appearance characteristics. Recently, along with the development of artificial meats, food enzymes have been employed to achieve more diverse functions, especially in converting non-edible biomass to delicious foods. Reported food enzyme modifications for specific applications have highlighted the significance of enzyme engineering. However, using direct evolution or rational design showed inherent limitations due to the mutation rates, which made it difficult to satisfy the stability or specific activity needs for certain applications. Generating functional enzymes using de novo design, which highly assembles naturally existing enzymes, provides potential solutions for screening desired enzymes. Here, we describe the functions and applications of food enzymes to introduce the need for food enzymes engineering. To illustrate the possibilities of using de novo design for generating diverse functional proteins, we reviewed protein modelling and de novo design methods and their implementations. The future directions for adding structural data for de novo design model training, acquiring diversified training data, and investigating the relationship between enzyme-substrate binding and activity were highlighted as challenges to overcome for the de novo design of food enzymes.

Characterization of a Nattokinase from the Newly Isolated Bile Salt-Resistant Bacillus mojavensis LY-06

Nattokinase is a potential new thrombolytic drug because of its strong thrombolytic effect, high safety, and low cost. However, there is no research reporting on bile salt-tolerant nattokinase-producing probiotics. In this study, the bile salt-tolerant nattokinase-producing strain Bacillus mojavensis LY-06 was isolated from local Xinjiang douchi, and the fermentation yield of nattokinase of 1434.64 U/mL was obtained by both a single factor experiment and an orthogonal experiment. A gene responsible for fibrinolysis (aprY) was cloned from the genome of strain Bacillus mojavensis LY-06, and the soluble expression of this gene in Escherichia coli (rAprY, fused with His-tag at C-terminus) was achieved; molecular docking elucidates the cause of insoluble expression of rAprY. The optimal pH and temperature for the fibrinolysis activity of nattokinase AprY fermented by Bacillus mojavensis LY-06 were determined to be pH 6.0 and 50 °C, respectively. However, the optimal pH of rAprY expressed in Escherichia coli was 8, and its acid stability, thermal stability, and fibrinolytic activity were lower than those of AprY. Bioinformatics analysis found that the His-tag carried at the C-terminus of rAprY could affect its acidic stability by changing the isoelectric point and surface charge of the enzyme; in contrast to AprY, changes in the number of internal hydrogen bonds and the flexibility of the loop region in the structure of rAprY resulted in lower fibrinolytic activity and poorer thermal stability.

Enhancement of thermostability and catalytic properties of ammonia lyase through disulfide bond construction and backbone cyclization

Ammonia lyases have great application potential in food and pharmaceuticals owing to their unique ammonia addition reaction and atom economy. A novel methylaspartate ammonia-lyase, EcMAL, from E. coli O157:H7 showed high catalytic activity. To further strengthen its thermostability and activity, disulfide bond and backbone cyclization (cyclase) variants were constructed by rational design, respectively. Among them, variant M3, with a disulfide bond introduced, exhibited a 2.3-fold increase in half-life at 50 °C, while cyclase variant M8 showed better performance, with 25.9-fold increases. The synergistic promotion effect of this combinational strategy on activity and stability was also investigated, and the combined mutant M9 exhibited a 1.1-fold improvement in catalytic efficiency while maintaining good thermostability. Circular dichroism analysis and molecular dynamics simulation confirmed that the main sources of improved thermostability were reduced atomic fluctuation and a more stable secondary structure. To our knowledge, this is the first example of combining the introduction of disulfide bonds with cyclase construction to improve enzyme stability, which was characterized by modification away from the enzyme active center, and provided a new method for adjusting enzyme thermostability.