Cellulose: Characteristics and applications for rechargeable batteries

Unveiling potential of cellulose gel electrolyte: Molecular engineering for enhanced electrostatic interactions with Mg adatoms in Mg-ion battery

The Mg-ion battery faces significant limitations due to its liquid electrolyte, which suffers from inherent issues such as leakage and the growth of Mg dendrites. In contrast, gel polymer electrolytes (GPEs) offer heightened safety, a wide voltage window, and excellent flexibility, making them a promising alternative with outstanding electrochemical performance. In this study, a cyano-modified cellulose (CEC) GPE was engineered to aim at enhancing ion transportation and promoting uniform ion-flux through interactions between N and Mg2+ ions. The resulting CEC-based GPE demonstrated a high ionic conductivity of 1.73 mS cm-1 at room temperature. Furthermore, it exhibited remarkable Mg plating/stripping performance (coulombic efficiency ~96.7 %) and compatibility with electrodes. Importantly, when employed in a Mo6S8//Mg battery configuration, the CEC GPE displayed exceptional cycle stability, with virtually no degradation observed even after 650 cycles at 1C, thereby significantly advancing Mg-ion battery technology due to its excellent electrochemical properties. This study provides valuable insights into the molecular engineering of cellulose-based GPEs.

Achievements, challenges, and perspectives in the design of polymer binders for advanced lithium-ion batteries

Energy storage devices with high power and energy density are in demand owing to the rapidly growing population, and lithium-ion batteries (LIBs) are promising rechargeable energy storage devices. However, there are many issues associated with the development of electrode materials with a high theoretical capacity, which need to be addressed before their commercialization. Extensive research has focused on the modification and structural design of electrode materials, which are usually expensive and sophisticated. Besides, polymer binders are pivotal components for maintaining the structural integrity and stability of electrodes in LIBs. Polyvinylidene difluoride (PVDF) is a commercial binder with superior electrochemical stability, but its poor adhesion, insufficient mechanical properties, and low electronic and ionic conductivity hinder its wide application as a high-capacity electrode material. In this review, we highlight the recent progress in developing different polymeric materials (based on natural polymers and synthetic non-conductive and electronically conductive polymers) as binders for the anodes and cathodes in LIBs. The influence of the mechanical, adhesion, and self-healing properties as well as electronic and ionic conductivity of polymers on the capacity, capacity retention, rate performance and cycling life of batteries is discussed. Firstly, we analyze the failure mechanisms of binders based on the operation principle of lithium-ion batteries, introducing two models of "interface failure" and "degradation failure". More importantly, we propose several binder parameters applicable to most lithium-ion batteries and systematically consider and summarize the relationships between the chemical structure and properties of the binder at the molecular level. Subsequently, we select silicon and sulfur active electrode materials as examples to discuss the design principles of the binder from a molecular structure point of view. Finally, we present our perspectives on the development directions of binders for next-generation high-energy-density lithium-ion batteries. We hope that this review will guide researchers in the further design of novel efficient binders for lithium-ion batteries at the molecular level, especially for high energy density electrode materials.

Bio-Based Aerogels in Energy Storage Systems

Bio-aerogels have emerged as promising materials for energy storage, providing a sustainable alternative to conventional aerogels. This review addresses their syntheses, properties, and characterization challenges for use in energy storage devices such as rechargeable batteries, supercapacitors, and fuel cells. Derived from renewable sources (such as cellulose, lignin, and chitosan), bio-based aerogels exhibit mesoporosity, high specific surface area, biocompatibility, and biodegradability, making them advantageous for environmental sustainability. Bio-based aerogels serve as electrodes and separators in energy storage systems, offering desirable properties such as high specific surface area, porosity, and good electrical conductivity, enhancing the energy density, power density, and cycle life of devices. Recent advancements highlight their potential as anode materials for lithium-ion batteries, replacing non-renewable carbon materials. Studies have shown excellent cycling stability and rate performance for bio-aerogels in supercapacitors and fuel cells. The yield properties of these materials, primarily porosity and transport phenomena, demand advanced characterization methods, and their synthesis and processing methods significantly influence their production, e.g., sol-gel and advanced drying. Bio-aerogels represent a sustainable solution for advancing energy storage technologies, despite challenges such as scalability, standardization, and cost-effectiveness. Future research aims to improve synthesis methods and explore novel applications. Bio-aerogels, in general, provide a healthier path to technological progress.

Development of novel paper-based supercapacitor electrode material by combining copper-cellulose fibers with polyaniline

Along with the developing of flexible electronics, there is a strong interest in high performance flexible energy storage materials. As natural carbohydrate polymer, cellulose fibers have potential applications in the area due to their biodegradability and flexibility. However, their conductive and electrochemical properties are impossible to meet the demands of practical applications. In this study, cellulose fibers were combined with polyaniline to develop novel paper-based supercapacitor electrode material. Cellulose fibers were firstly coordinated to Cu(II) and subsequently involved in polymerization of polyaniline. Not only the mass loading of polyaniline was significantly increased, but also an impressive area specific capacitance (2767 mF/cm2 at 1 mA/cm2) was achieved. The developed strategy is efficient, environmentally friendly, and has implications for the development of cellulosic paper-based advanced functional materials.

Synthesis of Sustainable Lignin Precursors for Hierarchical Porous Carbons and Their Efficient Performance in Energy Storage Applications

Lignin-derived porous carbons have great potential for energy storage applications. However, their traditional synthesis requires highly corrosive activating agents in order to produce porous structures. In this work, an environmentally friendly and unique method has been developed for preparing lignin-based 3D spherical porous carbons (LSPCs). Dropwise injection of a lignin solution containing PVA sacrificial templates into liquid nitrogen produces tiny spheres that are lyophilized and carbonized to produce LSPCs. Most of the synthesized samples possess excellent specific surface areas (426.6-790.5 m2/g) along with hierarchical micro- and mesoporous morphologies. When tested in supercapacitor applications, LSPC-28 demonstrates a superior specific capacitance of 102.3 F/g at 0.5 A/g, excellent rate capability with 70.3% capacitance retention at 20 A/g, and a commendable energy density of 2.1 Wh/kg at 250 W/kg. These materials (LSPC-46) also show promising performance as an anode material in sodium-ion batteries with high reversible capacity (110 mAh g-1 at 100 mA g-1), high Coulombic efficiency, and excellent cycling stability. This novel and green technique is anticipated to facilitate the scalability of lignin-based porous carbons and open a range of research opportunities for energy storage applications.

Recent advances in carboxymethyl cellulose-based active and intelligent packaging materials: A comprehensive review

Researchers have concentrated on innovative approaches to increase the shelf life of perishable food products and monitor their quality during storage and transportation as consumer demand for safe, environmentally friendly, and effective packaging develops. This comprehensive review aims to provide an overview of recent developments in carboxymethyl cellulose (CMC) chemical synthesis and its applications in active and intelligent packaging materials. It explores various methods for modifying cellulose to produce CMC and highlights the unique properties that make it suitable for addressing packaging industry challenges. The integration of CMC into active packaging systems, which helps reduce food waste and enhance food preservation, is discussed in depth. Furthermore, the integration of CMC in smart sensors and indicators for real-time monitoring and quality assurance in intelligent packaging is examined. The chemical synthesis of CMC and strategies to optimise its properties were studied, and the review concluded by examining the challenges and prospects of CMC-based packaging in the industry. This review is intended to serve as a valuable resource for researchers, industry professionals, and policymakers interested in the evolving landscape of CMC and its role in shaping the future of packaging materials.

Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries

Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

Advances in Polymer Binder Materials for Lithium-Ion Battery Electrodes and Separators

Lithium-ion batteries (LIBs) have become indispensable energy-storage devices for various applications, ranging from portable electronics to electric vehicles and renewable energy systems. The performance and reliability of LIBs depend on several key components, including the electrodes, separators, and electrolytes. Among these, the choice of binder materials for the electrodes plays a critical role in determining the overall performance and durability of LIBs. This review introduces polymer binders that have been traditionally used in the cathode, anode, and separator materials of LIBs. Furthermore, it explores the problems identified in traditional polymer binders and examines the research trends in next-generation polymer binder materials for lithium-ion batteries as alternatives. To date, the widespread use of N-methyl-2-pyrrolidone (NMP) as a solvent in lithium battery electrode production has been a standard practice. However, recent concerns regarding its high toxicity have prompted increased environmental scrutiny and the imposition of strict chemical regulations. As a result, there is a growing urgency to explore alternatives that are both environmentally benign and safer for use in battery manufacturing. This pressing need is further underscored by the rising demand for diverse binder research within the lithium battery industry. In light of the current emphasis on sustainability and environmental responsibility, it is imperative to investigate a range of binder options that can align with the evolving landscape of green and eco-conscious battery production. In this review paper, we introduce various binder options that can align with the evolving landscape of environmentally friendly and sustainable battery production, considering the current emphasis on battery performance enhancement and environmental responsibility.

Fe2O3/Ni Nanocomposite Electrocatalyst on Cellulose for Hydrogen Evolution Reaction and Oxygen Evolution Reaction

A key challenge in the development of sustainable water-splitting (WS) systems is the formulation of electrodes by efficient combinations of electrocatalyst and binder materials. Cellulose, a biopolymer, can be considered an excellent dispersing agent and binder that can replace high-cost synthetic polymers to construct low-cost electrodes. Herein, a novel electrocatalyst was fabricated by combining Fe2O3 and Ni on microcrystalline cellulose (MCC) without the use of any additional binder. Structural characterization techniques confirmed the formation of the Fe2O3-Ni nanocomposite. Microstructural studies confirmed the homogeneity of the ~50 nm-sized Fe2O3-Ni on MCC. The WS performance, which involves the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), was evaluated using a 1 M KOH electrolyte solution. The Fe2O3-Ni nanocomposite on MCC displayed an efficient performance toward lowering the overpotential in both the HER (163 mV @ 10 mA cm-2) and OER (360 mV @ 10 mA cm-2). These results demonstrate that MCC facilitated the cohesive binding of electrocatalyst materials and attachment to the substrate surface. In the future, modified cellulose-based structures (such as functionalized gels and those dissolved in various media) can be used as efficient binder materials and alternative options for preparing electrodes for WS applications.

Pure cellulose nanofiber separator with high ionic conductivity and cycling stability for lithium-ion batteries

Conventional polyolefin separators are constrained by poor electrolyte wettability, inferior thermal stability, and low ionic conductivity, which seriously restrict their application in high-performance lithium-ion batteries (LIBs). Herein, cellulose nanofiber (CNF) as the matrix and tert-butyl alcohol (TBA) as the dispersion medium were used to prepare the pure CNF separators for LIBs by a facile filtration method. The effects of the drying temperature on the pore structure, electrolyte wettability, mechanical properties, thermal stability, and ionic conductivity of the separators were comprehensively investigated. The results showed that the freeze-dried separator at -80 °C with TBA as the dispersion medium (TBA-FD) had the best overall performance, with the porosity and electrolyte uptake up to 70.8 % and 296 %, respectively, as well as the ionic conductivity up to 1.90 mS/cm. The CNF separators had no apparent thermal shrinkage at 160 °C, illustrating good thermal stability. Moreover, the LiFePO4/lithium metal battery assembled with the TBA-HD (tert-butyl alcohol as the dispersion medium for heat-drying at 80 °C) and TBA-FD separators displayed superior cycling stability (with a capacity retention rate up to 97.5 % and 96.4 %, respectively) and rate performance. The pure CNF separators with good performance prepared by the facile method are greatly promising for high-performance LIBs.

Exploring carbohydrate extraction from biomass using deep eutectic solvents: Factors and mechanisms

Deep eutectic solvents (DESs) are increasingly being recognized as sustainable and promising solvents because of their unique properties: low melting point, low cost, and biocompatibility. Some DESs possess high viscosity, remarkable stability, and minimal toxicity, enhancing their appeal for diverse applications. Notably, they hold promise in biomass pretreatment, a crucial step in biomass conversion, although their potential in algal biomass carbohydrates extraction remains largely unexplored. Understanding the correlation between DESs' properties and their behavior in carbohydrate extraction, alongside cellulose degradation mechanisms, remains a gap. This review provides an overview of the use of DESs in extracting carbohydrates from lignocellulosic and algal biomass, explores the factors that influence the behavior of DESs in carbohydrate extraction, and sheds light on the mechanism of cellulose degradation by DESs. Additionally, the review discusses potential future developments and applications of DESs, particularly extracting carbohydrates from algal biomass.

A High-Quality Genome Sequence of the Penicillium oxalicum 5-18 Strain Isolated from a Poplar Plantation Provides Insights into Its Lignocellulose Degradation

Studies on the degradation of plant cell wall polysaccharides by fungal extracellular enzymes have attracted recent attention from researchers. Xylan, abundant in hemicellulose, that play great role in connection between cellulose and lignin, has seen interest in its hydrolytic enzymatic complex. In this study, dozens of fungus species spanning genera were isolated from rotting leaves based on their ability to decompose xylan. Among these isolates, a strain with strong xylanase-producing ability was selected for further investigation by genome sequencing. Based on phylogenetic analysis of ITS (rDNA internal transcribed spacer) and LSU (Large subunit 28S rDNA) regions, the isolate was identified as Penicillium oxalicum. Morphological analysis also supported this finding. Xylanase activity of this isolated P. oxalicum 5-18 strain was recorded to be 30.83 U/mL using the 3,5-dinitro-salicylic acid (DNS) method. Further genome sequencing reveals that sequenced reads were assembled into a 30.78 Mb genome containing 10,074 predicted protein-encoding genes. In total, 439 carbohydrate-active enzymes (CAZymes) encoding genes were predicted, many of which were associated with cellulose, hemicellulose, pectin, chitin and starch degradation. Further analysis and comparison showed that the isolate P. oxalicum 5-18 contains a diverse set of CAZyme genes involved in degradation of plant cell wall components, particularly cellulose and hemicellulose. These findings provide us with valuable genetic information about the plant biomass-degrading enzyme system of P. oxalicum, facilitating a further exploration of the repertoire of industrially relevant lignocellulolytic enzymes of P. oxalicum 5-18.

A morphology control engineered strategy of Ti3C2Tx/sulfated cellulose nanofibril composite film towards high-performance flexible supercapacitor electrode

2D Ti₃C₂T_x MXene is an ideal material for fabricating supercapacitor electrodes due to its excellent physical-chemical properties. However, the inherent self-stacking, narrow interlayer spacing, and low general mechanical strength limit its application in flexible supercapacitors. Herein, facile structural engineering strategies by drying (vacuum drying, freeze drying, and spin drying) were proposed to fabricate 3D high-performance Ti₃C₂T_x/sulfated cellulose nanofibril (SCNF) self-supporting film supercapacitor electrodes. Compared with other composite films, the freeze-dried Ti₃C₂T_x/SCNF composite film exhibited a looser interlayer structure with more space which was conducive to charge storage and ion transport in the electrolyte. Therefore, the freeze-dried Ti₃C₂T_x/SCNF composite film exhibited a higher specific capacitance (220 F/g) compared to the vacuum-dried Ti₃C₂T_x/SCNF composite film (191 F/g) and the spin-dried Ti₃C₂T_x/SCNF composite film (211 F/g). After 5000 cycles, the capacitance retention rate of the freeze-dried Ti₃C₂T_x/SCNF film electrode was close to 100 %, showing excellent cycle performance. Meanwhile, the tensile strength of freeze-dried Ti₃C₂T_x/SCNF composite film (13.7 MPa) was much greater than that of the pure film (7.4 MPa). This work demonstrated a facile strategy for control of Ti₃C₂T_x/SCNF composite film interlayer structure by drying for fabricating well-designed structured flexible and free-standing supercapacitor electrodes.

Ni-doped MoS2 embedded in natural wood containing porous cellulose for piezo-catalytic degradation of tetracycline

Wood is a natural material with low cost and easy recovery, which porous, layered, excellent structure and mechanical properties make it possible to apply in wastewater treatment. We have successfully grown MoS₂ on natural wood containing porous cellulose and introduced the high conductivity circuit path provided by Ni nanoparticles to construct a new piezoelectric three-dimensional wood block for the efficient degradation of tetracycline. Ni/MoS₂/Wood exhibited excellent piezo-catalytic degradation performance, and the degradation rate of tetracycline reached 95.96 % (k = 0.0411 min^-1) under ultrasonic vibration. After 5 cycles, the degradation rate still reached 90.20 %. In addition, Ni/MoS₂/Wood was used as the reactor filler to degrade tetracycline through piezoelectric response triggered by hydrodynamic force, and the degradation rate reached 90.27 % after 60 min. Further, the mechanism and the possible degradation pathways of tetracycline degradation were proposed. This low-cost, recyclable and stable three-dimensional wood block piezoelectric material provides a new idea for the practical application of wastewater treatment.

Insight into TEMPO-oxidized cellulose-based composites as electrochemical sensors for dopamine assessment

The diagnosis and treatment of many neurological and psychiatric problems depend on establishing simple, inexpensive, and comfortable electrochemical sensors for dopamine (DA) detection. Herein, 2,2,6,6 tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOC) were successfully loaded with silver nanoparticles (AgNPs) and/or graphite (Gr) and crosslinked by tannic acid, producing composites. This study describes a suitable casting procedure for the composite synthesis of TOC/AgNPs and/or Gr for the electrochemical detection of dopamine. Electrochemical impedance spectra (EIS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to characterize the TOC/AgNPs/Gr composites. In addition, the direct electrochemistry of electrodes treated with the prepared composites was examined using cyclic voltammetry. The TOC/AgNPs/Gr composite-modified electrode improved electrochemical performance towards detecting dopamine compared to TOC/Gr-modified electrodes. Upon employing amperometric measurement, our electrochemical instrument has a wide linear range (0.005-250 μM), a low limit of detection (0.0005 μM) at S/N = 3, and a high sensitivity (0.963 μA μM^-1 cm^-2). Additionally, it was demonstrated that DA detection seemed to have outstanding anti-interference characteristics. The proposed electrochemical sensors meet the clinical criteria regarding reproducibility, selectivity, stability, and recovery. The straightforward electrochemical method utilized in this paper may provide a potential framework for creating dopamine quantification biosensors.

Cellulose nanocrystals-based bio-composite optical materials for reversible colorimetric responsive films and coatings

Photonic materials with a tunable chiral nematic structure that can selectively reflect light dynamically are valuable for applications in smart responsive materials. Here, we prepared potential photonic composites with a chiral nematic structure by forming cellulose nanocrystals (CNCs) and waterborne polyurethane (WPU) composites with different compositions on different substrates by evaporation-induced self-assembly. With increasing WPU content, the reflected wavelength increased from 400 to 680 nm, which was mainly caused by the increase of the chiral nematic pitch. In addition, the mechanical properties were better for higher WPU content. WPU was sensitive to small amounts of moisture in ethanol owing to the swollen WPU after absorbing water will increase the helical pitch. The reversible red shift induced by moisture was approximately 100 nm. When wood was used as the substrate, the CNCs still self-assembled to form chiral nematic structures and the adhesion forces of the composites to the wood substrate were strong. By using MgCl₂ solution as an ink, invisible patterns can be written on the coating, which can be revealed temporarily by ethanol. In addition, the invisible pattern of photonic coating is rewritable. The easily prepared environmentally friendly photonic composite has great potential in sensors, anti-counterfeiting labels and smart decorative coatings.

Preparation of cellulose-based porous adsorption materials derived from corn straw for wastewater purification

Various methods have been used to cope with heavy metal ion contamination in wastewater, which caused serious hazards to ecological and human health. Adsorption is one of the most frequent, economical and effective methods for removing these contaminants. Herein, a porous and amino-rich cellulose-based composite adsorbent (PEI-PCS) with anisotropic property was successfully prepared by covalently cross-linking polyethyleneimine on delignified corn straw. Combined with the porosity of straw substrate and the chelating ability of amino group to metal ions, the as-prepared PEI-PCS exhibited universality (various metal ions), rapid adsorption behavior (within 180 min achieve adsorption equilibrium), high adsorption capacity (85.47 mg g^-1 for Cu(II)), and good durability (70 % of adsorption efficiency after 5 cycles). In addition, the adsorption process was conformed to pseudo-second-order dynamics and the Langmuir isotherm models. Lastly, the adsorption mechanism was also elucidated. This study provides a sustainable pathway for the manufacture of efficient biomass-based adsorbents and confirms that functionalized corn straw is a promising material for the treatment of heavy metal ions.

UV and IR dual light triggered cellulose-based invisible actuators with high sensitivity

Actuators are widely used in bionic devices and soft robots, among which invisible actuators have some unique applications, including performing secret missions. In this paper, highly visible transparent cellulose-based UV-absorbing films were prepared by dissolving cellulose raw materials using N-methylmorpholine-N-oxide (NMMO) and using ZnO nanoparticles as UV absorbers. Furthermore, transparent actuator was fabricated by growing highly transparent and hydrophobic polytetrafluoroethylene (PTFE) film on regenerated cellulose (RC)-ZnO composite film. In addition to its sensitive response to Infrared (IR) light, the as-prepared actuator also shows a highly sensitive response to UV light, which is attributed to the strong absorption of UV light by ZnO NPs. Thanks to the drastic differences in adsorption capacity between the RC-ZnO and PTFE materials for water molecules, the asymmetrically- assembled actuator demonstrates extremely high sensitivity and excellent actuation performance, with a force density of 60.5, a maximum bending curvature of 3.0 cm^-1, and a response time of below 8 s. Bionic bug, smart door and the arm of excavator made from the actuator all exhibit sensitive responses to UV and IR lights.

A bacterial cellulose-based separator with tunable pore size for lithium-ion batteries

Bacterial cellulose (BC) lithium-ion batteries separators possess outstanding thermal dimensional stability and electrolyte wettability, but theirs nano diameter and high aspect ratio lead to poor porosity and pore size uniformity of dense BC separators, limiting the Li⁺ transmission in the separators. In this paper, chitosan (CS) with different molecular weight was grafted onto BC (named OBCS), and a high-performance OBCS separator with excellent pore structure and tunable pore size was prepared by simple suction filtration. The spacing and dispersion uniformity of OBCS were improved by the CS grafted on BC surface, thus improving the pore structure and porosity of OBCS separators. The results showed that the obtained OBCS separators not only have excellent physicochemical properties, but also exhibit higher electrochemical performances than the commercial polypropylene (PP) separator. This work provides a new feasible strategy for improving the pore structure and porosity of nanocellulose separators.

Mixed cellulose ester membrane as an ion redistributor to stabilize zinc anode in aqueous zinc ion batteries

Aqueous zinc-ion batteries (AZBs) with high energy density, low cost and environmental characteristics, have become the promising device for energy storage. However, uncontrolled zinc dendrite growth remains an impediment to the popularization of AZBs. The unrestricted two-dimensional (2D) ions diffusion is the main cause of the above defect. In this work, mixed cellulose ester (MCE) membrane is proposed as the separator. A dense homogeneous pore structure can achieve a physical shunting effect on ion diffusion, which can control and homogenize the ion motion. Further, the mechanism of this physical pore effect is confirmed by comparing the behavior of Zn deposition in MCE systems with different pore sizes but the same composition. As conjectured, a membrane with a smaller pore size is more favorable. In addition, the MCE contains many polar oxygen-containing functional groups that can facilitate and modulate ion diffusion through coordination. This chemical ion guiding effect, together with the above physical pore effect, gives the separator the ability to suppress dendrite formation. Zn/Zn symmetric cells with this membrane exhibit ultralong cycle life exceeding 1250 h at 0.5 mA cm^-2 and 1000 h at 5 mA cm^-2. And the Zn//MnO₂ battery presents excellent cycle stability for more than 500 cycles with a capacity retention of 90.67%. This work proposes MCE separators and reveals their coordinated regulation of physical and chemical effects on metal-based anodes. This will shed light on the development of high-performance separators and AZBs.

Preparation and research of PCL/cellulose composites: Cellulose derived from agricultural wastes

For the rational use of agricultural wastes, bagasse, orange peel and wheat bran were used to fabricate bio-based polymer materials. Cellulose was extracted from the three different agricultural wastes, and poly(ε-caprolactone) (PCL) was used as the matrix material. PCL was mixed with nanocrystalline cellulose (CNC), extracted bagasse cellulose (GC), orange peel cellulose (JC) and wheat bran cellulose (MC) by solution casting. Morphology and structure of the extracted cellulose were studied by Scanning Electron Microscope, Fourier Infrared spectrometer, thermogravimetry and X-ray diffractometer. The influence of GC, JC, MC on the crystallization process and mechanical properties of PCL was investigated by DSC and tensile test. Experimental results show that the addition of CNC, GC, JC, MC increases the crystallization temperature of PCL, accelerates the crystallization process of PCL, and improves the tensile property of PCL.

Polysaccharide of agar based ultra-high specific surface area porous carbon for superior supercapacitor

Although extensive research has been focused on porous carbon in supercapacitor, the simple and non-template preparation of high specific surface area (SSA) carbon material with hierarchical porous structure is still a lingering issue. Herein, the cross-linked hierarchical porous carbon with ultra-high SSA of 3184 m² g^-1 is prepared via the sol-gel follows the freeze drying and followed activation process. Agar is used as carbon precursor, L-arginine is nitrogen sources, and the formed gel is activated by KHCO₃. The obtained N-doped porous carbon shows a superior specific capacitance of 443.0 F g^-1 at 0.5 A g^-1 in 6 M KOH, and exhibits an excellent rate capability (255 F g^-1 at 50 A g^-1). Furthermore, due to the combined synergistic effect of high SSA, hierarchical porous structure and N doping, the symmetric supercapacitor that assembled with the prepared gel electrolyte of Agar-Na₂SO₄ achieves a superior energy density of 35.5 Wh kg^-1 and a long cycle life with the capacitance retention of 99.7% after 20,000 cycles. This work provides an efficient and simple method to prepare ultra-high surface area, hierarchical porous structure carbon materials for high performance supercapacitor.

Nanocellulose-based electrodes and separator toward sustainable and flexible all-solid-state supercapacitor

Nanocellulose, as the most abundant natural nanomaterial with sustainability, biodegradability, and excellent mechanical properties, has been widely applied in modern electronic systems, particularly, in the flexible electrochemical energy storage devices. Herein, a reduced graphene oxide (RGO)/cellulose nanocrystal/cellulose nanofiber (RCC) composite membrane was prepared by using a one-pot method. Compared to the pure RGO membranes, the RCC composite membranes exhibited better mechanical properties and hydrophilicity. Furthermore, due to the synergistic effect of nanocellulose and RGO sheets, the RCC composite membrane exhibited a specific capacitance as high as 171.3 F·cm^-3. Consequently, a nanocellulose-based symmetric flexible all-solid-state supercapacitor (FASC) was constructed, in which two RCC composite membranes served as electrodes and a porous cellulose nanofiber membrane acted as separator. This fabricated FASC demonstrated a high volumetric specific capacitance of 164.3 F·cm^-3 and a satisfactory energy density of 3.7 mW·h·cm^-3, which exceeded that of many other FASCs ever reported. This work may open a new avenue in design of next-generation nanocellulose based, sustainable and flexible energy storage device.

Study on cellulose nanofibers/aramid fibers lithium-ion battery separators by the heterogeneous preparation method

In this study, a heat-resistant and high-wettability lithium-ion batteries separator (PI-CPM-PI) composed of cellulose nanofibers (CNF) and aramid fibers (PMIA chopped fiber/PPTA pulp) with the reinforced concrete structure was fabricated via a traditional heterogeneous paper-making process. CNF played crucial roles in optimizing the pore structure and improving the wettability of PI-CPM-PI separator. The effects of composition on separator properties were investigated and the results indicated that the optimal compositions were 0.5 wt% CNF, 0.5 wt% PMIA chopped fiber/PPTA pulp (ratio of 5:5), 0.05 wt% diatomite and 1.5 wt% polyimide. Relevant tests demonstrated that the performance advantages of PI-CPM-PI separators were exhibited at the wettability and thermal stability compared to the commercial separator (PP). Additionally, batteries assembled with PI-CPM-PI separators showed excellent electrochemical and cycling performance (ionic conductivity of 1.041 mS.cm^-1, the first discharge capacity of 158.2 mAh.g^-1 at 0.2C and capacity retention ratio of 99.76 % after 100 cycles).

Construction of self-supporting ultra-micropores lignin-based carbon nanofibers with high areal desalination capacity

Lignin is a renewable biomacromolecule that can be used as precursors for carbon materials. In this work, highly flexible lignin-based carbon nanofibers with abundant ultra-micropores are constructed via electrospinning, oxidative stabilization and carbonization. The results indicate that replacing PAN with 80 % lignin is feasible in regulating ultra-micropores. The synthesized L4P1-CNFs possess many attractive properties (e.g., pore size distribution, electrochemical and deionization property) compared with that produced from other non-renewable precursors or more-complexed processes. It shows excellent electrochemical double-layer capacitance in 6 M KOH (233 to 162 F g^-1 at 0.5 to 5 A g^-1) and 1 M NaCl (158 to 82 F g^-1 at 0.5 to 5 A g^-1) electrolytes. Upon assembling into CDI cells, the average salt adsorption rate could reach 1.79 mg g^-1 min^-1 at 1.2 V and 3.32 mg g^-1 min^-1 at 2 V in 500 mg L^-1. Benefiting from the excellent flexibility, we innovatively stack four layers of L4P1-CNFs to improve the areal electrosorption capacity to 0.0817 mg cm^-2 at 500 mg L^-1, significantly higher than that of traditional carbon-based electrodes. The good desalination property makes lignin-based carbon nanofibers ideal for practical, low-cost capacitive deionization applications.

Recent Developments on Bioinspired Cellulose Containing Polymer Nanocomposite Cation and Anion Exchange Membranes for Fuel Cells (PEMFC and AFC)

Hydrogen fuel cell (FC) technologies are being worked on as a possible replacement for fossil fuels because they produce a lot of energy and do not pollute the air. In FC, ion-exchange membranes (IEMs) are the vital components for ion transport between two porous electrodes. However, the high production cost of commercialized membranes limits their benefits. Various research has focused on cellulose-based membranes such as IEM with high proton conductivity, and mechanical, chemical, and thermal stabilities to replace the high cost of synthetic polymer materials. In this review, we focus on and explain the recent progress (from 2018 to 2022) of cellulose-containing hybrid membranes as cation exchange membranes (CEM) and anion exchange membranes (AEM) for proton exchange membrane fuel cells (PEMFC) and alkaline fuel cells (AFC). In this account, we focused primarily on the effect of cellulose materials in various membranes on the functional properties of various polymer membranes. The development of hybrid membranes with cellulose for PEMFC and AFC has been classified based on the combination of other polymers and materials. For PEMFC, the sections are associated with cellulose with Nafion, polyaryletherketone, various polymeric materials, ionic liquid, inorganic fillers, and natural materials. Moreover, the cellulose-containing AEM for AFC has been summarized in detail. Furthermore, this review explains the significance of cellulose and cellulose derivative-modified membranes during fuel cell performance. Notably, this review shows the vital information needed to improve the ion exchange membrane in PEMFC and AFC technologies.

Sustainable lignin precursors for tailored porous carbon-based supercapacitor electrodes

Sustainable materials are attracting a lot of attention since they will be critical in the creation of the next generation of products and devices. In this study, hydrogels were effectively synthesized utilizing lignin, a non-valorised biopolymer from the paper industry. This study proposes a method based on utilizing lignin to create highly swollen hydrogels using poly(ethylene) glycol diglycidyl ether (PEGDGE) as a crosslinking agent. The influence of different crosslinker ratios on the structural and chemical properties of the resultant hydrogels was investigated. Pore size was observed to be lowered when the amount of crosslinker was increased. The inclusion of additional hydrophilic groups in the hydrogel network decreased the swelling capacity of the hydrogels as the crosslinking density increases. These precursor materials were carbonised and electrochemically tested for application as electrodes for supercapacitors with capacitance characterized as a function of crosslinker ratio.