Magnetic Fe3O4 embedded chitosan-crosslinked-polyacrylamide composites with enhanced removal of food dye: Characterization, adsorption and mechanism

Removal of food dyes using biological materials via adsorption: A review

It is alarming that synthetic food dyes (FD) are widely used in various industries and that these facilities discharge their wastewater into the environment without treating it. FDs mixed into industrial wastewater pose a threat to the environment and human health. Therefore, removing FDs from wastewater is very important. This review explores the burgeoning field of FD removal from wastewater through adsorption using biological materials (BMs). By synthesizing a wealth of research findings, this comprehensive review elucidates the diverse array of BMs employed, ranging from algae and fungi to agricultural residues and microbial biomass. Furthermore, this review investigates challenges in practical applications, such as process optimization and scalability, offering insights into bridging the gap between laboratory successes and real-world implementations. Harnessing the remarkable adsorptive potential of BMs, this review presents a roadmap toward transformative solutions for FD removal, promising cleaner and safer production practices in the food and beverage industry.

Fabrication of MoS2 restrained magnetic chitosan polysaccharide composite for the photocatalytic degradation of organic dyes

Chitosan (CS) polysaccharide is expected to exhibit greater ionic conductivity, which can be attributed to its increased amino group content when it is blended with different semiconducting materials. Herein, the work used this conducting ability of chitosan and prepared a heterogeneous MoS2-induced magnetic chitosan (MF@CS) composite via the co-precipitation method, which was used to scrutinize the catalytic performance with Methylene Blue (MB) and Malachite Green (MG) dyes by visible light irradiation. The saturation magnetization value of the MF@CS composite is found to be 7.8 emu/g, which is less when compared to that of pristine Fe3O4 (55.7 emu/g) particles. The bandgap of the MF@CS composite is ∼ 2.17eV, which exceeds the bandgap (Eg) of bare MoS2 of 1.80 eV. The maximum color removal of 96.3 % and 93.4 % for MB and MG dyestuffs is recognized in the exposure of the visible spectrum, respectively. At a starting dye dosage of 30 mg/L, 0.1 g/L of MF@CS, a pH level of 8-11, and 70 min of contact with direct light. The photocatalyst provides extremely good durability for a maximum of five phases. Hence, the MF@CS matrix is a viable and appropriate substance for the efficient treatment of effluents containing dye molecules.

Sustainable chitosan-based materials as heterogeneous catalyst for application in wastewater treatment and water purification: An up-to-date review

Water pollution is one of serious environmental issues due to the rapid development of industrial and agricultural sectors, and clean water resources have been receiving increasing attention. Recently, more and more studies have witnessed significant development of catalysts (metal oxides, metal sulfides, metal-organic frameworks, zero-valent metal, etc.) for wastewater treatment and water purification. Sustainable and clean catalysts immobilized into chitosan-based materials (Cat@CSbMs) are considered one of the most appealing subclasses of functional materials due to their high catalytic activity, high adsorption capacities, non-toxicity and relative stability. This review provides a summary of various upgrading renewable Cat@CSbMs (such as cocatalyst, photocatalyst, and Fenton-like reagent, etc.). As for engineering applications, further researches of Cat@CSbMs should focus on treating complex wastewater containing both heavy metals and organic pollutants, as well as developing continuous flow treatment methods for industrial wastewater using Cat@CSbMs. In conclusion, this review abridges the gap between different approaches for upgrading renewable and clean Cat@CSbMs and their future applications. This will contribute to the development of cleaner and sustainable Cat@CSbMs for wastewater treatment and water purification.

Green synthesis of magnetic azo-linked porous organic polymers with recyclable properties for enhanced Bisphenol-A adsorption from aqueous solutions

Porous organic polymers (POPs) present superior adsorption performance to steroid endocrine disruptors. However, the effective recovery and high cost have been a big limitation for their large-scale applications. Herein, magnetic azo-linked porous polymers (Fe3O4@SiO2/ALP-p) were designed and prepared in a green synthesis approach using low-price materials from phloroglucinol and pararosaniline via a diazo-coupling reaction under standard temperature and pressure conditions, which embedded with Fe3O4@SiO2 nanoparticles to form three-dimensional interlayer network structure with flexible-rigid interweaving. The saturated adsorption capacity to bisphenol-A (BPA) was 485.09 mg/g at 298 K, which increased by 1.4 times compared with ALP-p of relatively smaller mass density. This enhanced adsorption was ascribed to increment from surface adsorption and pore filling with 2.3 times of specific surface area and 2.6 times of pore volume, although the total organic functional groups decreased with Fe3O4@SiO2 amendment. Also, the adsorption rate increased by about 1.1 and 1.5-fold due to enhancement in the initial stage of surface adsorption and subsequent stage pore diffusion, respectively. Moreover, this adsorbent could be used in broad pH (3.0-7.0) and salinity adaptability (<0.5 mol/L). The loss of adsorption capacity and magnetic recovery were lower than 1.1% and 0.8% in each operation cycle because of the flexible-rigid interweave. This excellent performance was contributed by synergistic effects from physisorption and chemisorption, such as pore filling, electrostatic attraction, π-π stacking, hydrogen bonding, and hydrophobic interaction. This study offered a cost-effective, high-performing, and ecologically friendly material along with a green preparation method.

Fabrication of an Fe-Doped ZIF-67 Derived Magnetic Fe/Co/C Composite for Effective Removal of Congo Red

The dyes in printing and dyeing wastewater are harmful to the human body and the environment. It is essential to develop practical and effective adsorbents to deal with them. In this study, an Fe-doped, ZIF-67 derived Fe/Co/C composite material with strong magnetism was successfully synthesized. The effects of pH, initial concentration, and adsorption time on the properties of the adsorbent were investigated. To further improve the removal efficiency and enhance the practicality, potassium peroxymonosulfate (PMS) was added to the system due to its Fenton-like effect. Then, an Fe/Co/C composite was used with PMS to remove Congo red (CR) with a 98% removal of 250 mg·L-1. Moreover, for its high saturation magnetization of 85.4 emu·g-1, the Fe/Co/C composite can be easily recovered by applying a magnetic field, solving the problem that powdery functional materials are difficult to recover and, thus, avoiding secondary pollution. Furthermore, since the composite material was doped before carbonization, this synthetic strategy is flexible and the required metal elements can be added at will to achieve different purposes. This study demonstrates that this Fe-doped, ZIF-67 derived magnetic material has potential application prospects for dye adsorption.

Novel Chitosan-ZnO nanocomposites derived from Nymphaeaceae fronds for highly efficient removal of Reactive Blue 19, Reactive Orange 16, and Congo Red dyes

The primary aim of this investigation was to synthesise novel adsorbent by incorporating greenly synthesized zinc oxide nanoparticles into chitosan matrix (G-ZnO-Cs). The production of ZnO Nanoparticles via a green approach involved the utilization of extracts derived from Nymphaeaceae fronds. This assertion was substantiated by the application of Field Emission Scanning Electron Microscopy (FESEM) and X-ray Diffraction (XRD) analytical techniques. Several Analytical methods such as Fourier Transform Infrared spectroscopy (FT-IR), Energy Dispersive X-ray Analysis (EDAX), FESEM, Thermogravimetric Analysis (TGA), XRD, Brunauer-Emmett-Teller (BET) analysis, and point-of-zero charge determination were used to characterize G-ZnO-Cs. Further study investigates the impact of five key processing parameters, namely pH, interaction duration, G-ZnO-Cs dosage, temperature, and initial concentration of dyes, on the removal of three organic dyes Reactive Blue 19 (RB 19), Reactive Orange 16 (RO 16), and Congo Red (CR) The adsorption process of Reactive Blue 19 (RB 19), Reactive Orange 16 (RO 16), and Congo Red (CR) dyes on G-ZnO-Cs were determined to comply to the pseudo-second-order (PSO) and Langmuir models, as determined through equilibrium and kinetic experiments. The highest adsorption capabilities for RB 19, RO 16 and CR dye were revealed to be 219.6 mg/g, 129.6 mg/g, and 118.8 mg/g, respectively. The elimination success rate of the fixed-bed column approach for treating huge volumes was highlighted in the conducted research. Moreover, the G-ZnO-Cs composite exhibited significant reusability due to its ability to undergo elution and simultaneous regeneration processes.

Optimizing magnetic, dielectric, and antimicrobial performance in chitosan-PEG-Fe2O3@NiO nanomagnetic composites

There is a growing interest in eco-friendly and cost-effective organic-inorganic nanocomposites due to their alignment with the principles of "green" chemistry, as well as their biocompatibility and non-toxicity. This study focused on producing Chitosan-PEG-Fe2O3@NiO nanomagnetic composites to improve the stability, dielectric properties, and antimicrobial effectiveness of these nanocomposite materials. The process involved synthesizing Fe2O3@NiO via sol-gel and polymerizing chitosan-PEG. The nanocomposites were characterized by XRD, TEM, FTIR, optical, dielectric, and VSM. Incorporating Fe2O3@NiO significantly improved stability, and the interaction with Fe2O3 during the sol-gel process facilitated the formation of NiFe2O4 with an increase in the crystallinity within the chitosan-PEG matrix. The study examined optical and dielectric properties, highlighting that the 3 NiO-doped chitosan-PEG-Fe2O3 composites had high electrical conductivity (1.8 ∗ 10-3 S/cm) and a significant dielectric constant (106 at low frequencies). As the ratio of NiO NPs within the chitosan-PEG-Fe2O3 increases, the energy band gap of chitosan-PEG-Fe2O3 films decreases up to 3.7 eV. This decrease is owing to the quantum confinement effect. These composites also demonstrated improved antimicrobial activity against E. coli and S. aureus and higher activity in the presence of nanomagnetic particles. The minimum inhibitory concentrations of CS-PEG-Fe2O3/NiO NPs against (Bacillus cereus, M. luteus, S. aureus and (S. enterica, H. pylori, E. coli) were (22-35 mm) and (21-34 mm), respectively.

Enhancing cationic dye removal via biocomposite formation between chitosan and food grade algae: Optimization of algae loading and adsorption parameters

Herein, a natural material including chitosan (CTS) and algae (food-grade algae, FGA) was exploited to attain a bio-adsorbent (CTS/FGA) for enhanced methyl violet 2B dye removal. A study of the FGA loading into CTS matrix showed that the best mixing ratio between CTS and FGA to be used for the MV 2B removal was 50 %:50 % (CTS/FGA; 50:50 w/w). The present study employed the Box-Behnken design (RSM-BBD) to investigate the impact of three processing factors, namely CTS/FGA-(50:50) dose (0.02-0.1 g/100 mL), pH of solution (4-10), and contact time (5-15 min) on the decolorization rate of MV 2B dye. The results obtained from the equilibrium and kinetic experiments indicate that the adsorption of MV 2B dye on CTS/FGA-(50:50) follows the Langmuir and pseudo-second-order models, respectively. The CTS/FGA exhibits an adsorption capacity of 179.8 mg/g. The characterization of CTS/FGA-(50:50) involves the proposed mechanism of MV 2B adsorption, which primarily encompasses various interactions such as electrostatic forces, n-π stacking, and H-bonding. The present study demonstrates that CTS/FGA-(50:50) synthesized material exhibits a distinctive structure and excellent adsorption properties, thereby providing a viable option for the elimination of toxic cationic dyes from polluted water.

Modeling sunset yellow removal from fruit juice samples by a novel chitosan-nickel ferrite nano sorbent

Analysis of food additives is highly significant in the food industry and directly related to human health. This investigation into the removal efficiency of sunset yellow as an azo dye in fruit juices using Chitosan-nickel ferrite nanoparticles (Cs@NiFe2O4 NPs). The nanoparticles were synthesized and characterized using various techniques. The effective parameters for removing sunset yellow were optimized using the response surface methodology (RSM) based on the central composite design (CCD). Under the optimum conditions, the highest removal efficiency (94.90%) was obtained for the initial dye concentration of 26.48 mg L-1 at a pH of 3.87, a reaction time of 67.62 min, and a nanoparticle dose of 0.038 g L-1. The pseudo-second-order kinetic model had a better fit for experimental data (R2 = 0.98) than the other kinetic models. The equilibrium adsorption process followed the Freundlich isotherm model with a maximum adsorption capacity of 212.766 mg g-1. The dye removal efficiency achieved for industrial and traditional fruit juice samples (91.75% and 93.24%), respectively, confirmed the method's performance, feasibility, and efficiency. The dye adsorption efficiency showed no significant decrease after five recycling, indicating that the sorbent has suitable stability in practical applications. variousThe synthesized nanoparticles can be suggested as an efficient sorbent to remove the sunset yellow dye from food products.

A review on chitosan/metal oxide nanocomposites for applications in environmental remediation

A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.

A magnetically recyclable carboxyl-functionalized chitosan composite for efficiently removing methyl orange from wastewater: Isotherm, kinetics, thermodynamic, and adsorption mechanism

In this study, a kind of magnetically recyclable adsorbent for dyes was synthesized by grafting diethylenetriamine pentaacetate acid (DTPA) to the composite of Fe3O4 microspheres and crosslinked chitosan (CS). The microstructures, molecular structure, crystal structure, and magnetic hysteresis loops of the chitosan matrix adsorbent before and after grafting was characterized. The results suggested that DTPA was covalent bonded with the composite of Fe3O4 microspheres and chitosan. The modified composite has larger specific surface area and can realize rapid solid-liquid separation. Batch experiments were conducted to optimize the parameters affecting the adsorption of methyl orange (MO). The adsorption process could be better described by pseudo-second-order kinetics model and Langmuir isotherm equation, and its saturated adsorption capacity of the modified adsorbents was 1541.5 mg·g-1 at 25 °C, which was 1.40 times of that the unmodified adsorbent (1104.1 mg·g-1). The obtained values of the thermodynamic parameters indicated that the adsorption was a spontaneous process. The regeneration experiment proved the stability and reproducibility of the adsorbent even after five cycles of adsorption-desorption. The primary adsorption mechanism was electrostatic interaction and hydrogen bonding. The adsorbent could be potentially applied for removing dyes from wastewater in wide pH of range, especially acid wastewater.

Next-Generation Water Treatment: Exploring the Potential of Biopolymer-Based Nanocomposites in Adsorption and Membrane Filtration

This review article focuses on the potential of biopolymer-based nanocomposites incorporating nanoparticles, graphene oxide (GO), carbon nanotubes (CNTs), and nanoclays in adsorption and membrane filtration processes for water treatment. The aim is to explore the effectiveness of these innovative materials in addressing water scarcity and contamination issues. The review highlights the exceptional adsorption capacities and improved membrane performance offered by chitosan, GO, and CNTs, which make them effective in removing heavy metals, organic pollutants, and emerging contaminants from water. It also emphasizes the high surface area and ion exchange capacity of nanoclays, enabling the removal of heavy metals, organic contaminants, and dyes. Integrating magnetic (Fe2O4) adsorbents and membrane filtration technologies is highlighted to enhance adsorption and separation efficiency. The limitations and challenges associated are also discussed. The review concludes by emphasizing the importance of collaboration with industry stakeholders in advancing biopolymer-based nanocomposites for sustainable and comprehensive water treatment solutions.

Adsorptive removal of anionic azo dye by Al3+-modified magnetic biochar obtained from low pyrolysis temperatures of chitosan

Magnetic γ-Fe₂O₃/Al³⁺@chitosan-derived biochar (m-Fe₂O₃/Al³⁺@CB) was prepared by introducing magnetic maghemite (γ-Fe₂O₃) nanoparticles and aluminum sulfate [Al₂(SO₄)₃] into chitosan-derived biochar (CB) obtained at low pyrolysis temperatures. m-Fe₂O₃/Al³⁺@CB was used to remove typical anionic azo dye (Congo red, CR). Effects of initial CR concentration, contact time, initial pH value, background electrolytes, and temperature on CR adsorption by m-Fe₂O₃/Al³⁺@CB were studied. Compared with magnetic chitosan-derived biochar (m-Fe₂O₃@CB), m-Fe₂O₃/Al³⁺@CB exhibited excellent performance for a wider range of pH values (pH 1-7) and in the presence of background electrolyte. The introduction of Al³⁺ is an effective method for improving the properties of magnetic chitosan-derived biochar. High CR adsorption capacity (636.94 mg g^-1) of m-Fe₂O₃/Al³⁺@CB could result from collaborative effect of flocculation/coagulation and electrostatic attraction. These results demonstrated that m-Fe₂O₃/Al³⁺@CB is a potential adsorbent for effective removal of organic dyes from aqueous solution due to its high adsorption capacity and convenient magnetic recovery and stronger anti-interference ability against coexisting anions in wastewater.