Novel approaches toward the generation of bioscaffolds as a potential therapy in cardiovascular tissue engineering

In vitro development of a muscle-tendon junction construct using decellularised extracellular matrix: Effect of cyclic tensile loading

The muscle tendon junction (MTJ) plays a crucial role in transmitting the force generated by muscles to the tendon and then to the bone. Injuries such as tears and strains frequently happen at the MTJ, where the regenerative process is limited due to poor vascularization and the complex structure of the tissue. Current solutions for a complete tear at the MTJ have not been successful and therefore, the development of a tissue-engineered MTJ may provide a more effective treatment. In this study, decellularised extracellular matrix (DECM) derived from sheep MTJ was used to provide a scaffold for the MTJ with the relevant mechanical properties and differentiation cues such as the relase of growth factors. Human mesenchymal stem cells (MSCs) were seeded on DECM and 10 % cyclic strain was applied using a bioreactor. MSCs cultured on DECM showed significantly higher gene and protein expression of MTJ markers such as collagen 22, paxillin and talin, than MSCs in 2D culture. Although collagen 22 protein expression was higher in the cells with strain than without strain, reduced gene expression of other MTJ markers was observed when the strain was applied. DECM combined with 10 % strain enhanced myogenic differentiation, while tenogenic differentiation was reduced when compared to static cultures of MSCs on DECM. For the first time, these results showed that DECM derived from the MTJ can induce MTJ marker gene and protein expression by MSCs, however, the effect of strain on the MTJ development in DECM culture needs further investigation.

Impact of the Different Chemical-Based Decellularization Protocols on the Properties of the Caprine Pericardium

PURPOSE

This study aims to decellularized caprine pericardium tissue with varied non-ionic surfactant and anionic detergent concentrations.

METHODS

Protocol A consists of 1%, 0.5%, and 0.25% (w/v) sodium dodecyl sulphate (SDS). Protocol B uses 1%, 0.5%, and 0.25% (w/v) Triton X-100. Protocol C comprised 0.5% SDS + 0.5% Triton X-100, 0.5% + 0.25%, and 0.25% SDS + 0.5% Triton X-100.

RESULTS

Protocol B left a few countable cells in the pericardium tissue, but treatments A and C removed all cells. DNA quantification also demonstrated that protocol B had the most leftover DNA after decellularization. The pericardium tissue treated with an equal combination of anionic detergent and non-ionic surfactant preserves the matrix. However, changing the anionic detergent-non-ionic surfactant ratio disrupted the microstructure. Protocol A decreased pericardium tissue secant modulus (p < 0.05). Protocol B-treated pericardium tissue matched native tissue secant modulus and ultimate tensile stress. Protocol C strengthened pericardium tissue.

CONCLUSION

The intact extracellular matrix and biomechanical properties like native tissues require optimal chemical doses and combinations.

Unlocking the Promise of Decellularized Pancreatic Tissue: A Novel Approach to Support Angiogenesis in Engineered Tissue

Advancements in regenerative medicine have highlighted the potential of decellularized extracellular matrix (ECM) as a scaffold for organ bioengineering. Although the potential of ECM in major organ systems is well-recognized, studies focusing on the angiogenic effects of pancreatic ECM are limited. This study investigates the capabilities of pancreatic ECM, particularly its role in promoting angiogenesis. Using a Triton-X-100 solution, porcine pancreas was successfully decellularized, resulting in a significant reduction in DNA content (97.1% removal) while preserving key pancreatic ECM components. A three-dimensional ECM hydrogel was then created from this decellularized tissue and used for cell culture. Biocompatibility tests demonstrated enhanced adhesion and proliferation of mouse embryonic stem cell-derived endothelial cells (mES-ECs) and human umbilical vein endothelial cells (HUVECs) in this hydrogel compared to conventional scaffolds. The angiogenic potential was evaluated through tube formation assays, wherein the cells showed superior tube formation capabilities in ECM hydrogel compared to rat tail collagen. The RT-PCR analysis further confirmed the upregulation of pro-angiogenic genes in HUVECs cultured within the ECM hydrogel. Specifically, HUVECs cultured in the ECM hydrogel exhibited a significant upregulation in the expression of MMP2, VEGF and PAR-1, compared to those cultured in collagen hydrogel or in a monolayer condition. The identification of ECM proteins, specifically PRSS2 and Decorin, further supports the efficacy of pancreatic ECM hydrogel as an angiogenic scaffold. These findings highlight the therapeutic promise of pancreatic ECM hydrogel as a candidate for vascularized tissue engineering application.

Regenerative effect of microcarrier form of acellular dermal matrix versus bone matrix bio-scaffolds loaded with adipose stem cells on rat bone defect

BACKGROUND

Bone defects lead to dramatic changes in the quality of life. Acellular dermal matrix (ADM) and decellularized bone matrix (DBM) are natural scaffolds for tissue regeneration. The microcarrier scaffolds enable better vascularization and cell proliferation. This study compared the effect of microcarrier forms of DBM and ADM-loaded with adipose stem cells (ASCs) in the repair of compact bone defect in-vivo.

METHODS

Fifty-four male rats were divided into 4 groups; (i) Group (Gp) I: sham control; (ii) GpII: underwent femur bone defect induction and left to heal spontaneously; (iii) GpIII (ADM-Gp): included 2 subgroups; IIIa and IIIb: the bone defects were filled with non-loaded ADM and ADM-loaded with ASCs, respectively; (iv) GpIV (DBM-Gp): included 2 subgroups; IVa and IVb: the bone defects were filled with non-loaded DBM and DBM-loaded with ASCs, respectively. Animals were euthanized after 1, 2 and 3 months and their femur sections were stained with H&E, Masson's trichrome and immunohistochemistry for CD31, osteopontin and osteocalcin.

RESULTS

Histological analysis illustrated limited bone regeneration in the cortical defect of GpII after 3 months. The histomorphometric analysis showed significant delayed mature collagen deposition as well as CD31, osteopontin and osteocalcin expression. Superior capacity of new bone regeneration was detected with bio-scaffold micro-carriers; loaded or non-loaded with ASCs. However, DBM-loaded with ASCs displayed enhanced regeneration properties confirmed by the apparently normal architecture of the new bone and accelerated expression of CD31, osteopontin and osteocalcin in the regenerated bone after 3 months.

CONCLUSIONS

We concluded that decellularized scaffolds significantly improved compact bone regeneration with superiority of ASCs seeded-bone scaffolds.

Evaluation of Osteogenic Potential for Rat Adipose-Derived Stem Cells under Xeno-Free Environment

This study aimed to develop a novel culture method for rat adipose-derived stem cells (rADSC) and evaluate their osteogenic potential. The rADSC cultured in xeno-free culture medium (XF-rADSCs) or conventional culture medium containing fetal bovine serum (FBS-rADSCs) were combined with micropieces of xeno-free recombinant collagen peptide to form 3-dimensional aggregates (XF-rADSC-CellSaic or FBS-rADSC-CellSaic). Both FBS-rADSC and XF-ADSC in CellSaic exhibited multilineage differentiation potential. Compared to FBS-rADSC-CellSaic, XF-rADSC-CellSaic accelerated and promoted osteogenic differentiation in vitro. When transplanted into rat mandibular congenital bone defects, the osteogenically differentiated XF-rADSC-CellSaic induced regeneration of bone tissue with a highly maturated structure compared to FBS-rADSC-CellSaic. In conclusion, XF-rADSC-CellSaic is a feasible 3-dimensional platform for efficient bone formation.

Crosslinked Decellularized Porcine Pericardium as a Substrate for Conjunctival Reconstruction

Seeking for suitable conjunctival reconstruction substitutes to overcome the limitations of current substitutes, such as amniotic membrane, is urgent. Decellularized tissues have become a promising strategy for tissue engineering. In this study, we prepared decellularized porcine pericardium (DPP) scaffolds by the phospholipase A2 method and crosslinked them with aspartic acid (Asp) and human endothelial growth factor (hEGF) to enhance biological performance on the DPP, obtaining DPP-Asp-hEGF scaffolds. In vitro DPP showed lower apoptosis, highly desirable, well preservation of extracellular matrix components, and favorable macro-microstructure, which was confirmed by histology, immunofluorescence, electron microscopy, collagen and DNA quantification, and cytotoxicity assay, compared to the native porcine pericardium (NPP). The crosslinked efficacy of the DPP-Asp-hEGF was furtherer verified by in vitro experiments with Fourier transform infrared (FTIR) and X-ray diffraction (XRD). Through animal models of conjunctiva defect model, the DPP-Asp-hEGF revealed a closed, multilayer epithelium with an equal amount of goblet cells and no indication for conjunctival scarring after 28 days, compared to amniotic membrane (AM) groups and sham groups. These results suggested that DPP-Asp-hEGF can offer a good conjunctival reconstructive substitute both in structure and in function.

Application of decellularized bone matrix as a bioscaffold in bone tissue engineering

Autologous bone grafts are commonly used as the gold standard to repair and regenerate diseased bones. However, they are strongly associated with postoperative complications, especially at the donor site, and increased surgical costs. In an effort to overcome these limitations, tissue engineering (TE) has been proposed as an alternative to promote bone repair. The successful outcome of tissue engineering depends on the microstructure and composition of the materials used as scaffold. Decellularized bone matrix-based biomaterials have been applied as bioscaffolds in bone tissue engineering. These biomaterials play an important role in providing the mechanical and physical microenvironment needed by cells to proliferate and survive. Decellularized extracellular matrix (dECM) can be used as a powder, hydrogel and electrospun scaffolds. These bioscaffolds mimic the native microenvironment due to their structure similar to the original tissue. The aim of this review is to highlight the bone decellularization techniques. Herein we discuss: (1) bone structure; (2) properties of an ideal scaffold; (3) the potential of decellularized bone as bioscaffolds; (4) terminal sterilization of decellularized bone; (5) cell removing confirmation in decellularized tissues; and (6) post decellularization procedures. Finally, the improvement of bone formation by dECM and the immunogenicity aspect of using the decellularized bone matrix are presented, to illustrate how novel dECM-based materials can be used as bioscaffold in tissue engineering. A comprehensive understanding of tissue engineering may allow for better incorporation of therapeutic approaches in bone defects allowing for bone repair and regeneration.

Therapeutic Acellular Scaffolds for Limiting Left Ventricular Remodelling-Current Status and Future Directions

Myocardial infarction (MI) is one of the leading causes of heart-related deaths worldwide. Following MI, the hypoxic microenvironment triggers apoptosis, disrupts the extracellular matrix and forms a non-functional scar that leads towards adverse left ventricular (LV) remodelling. If left untreated this eventually leads to heart failure. Besides extensive advancement in medical therapy, complete functional recovery is never accomplished, as the heart possesses limited regenerative ability. In recent decades, the focus has shifted towards tissue engineering and regenerative strategies that provide an attractive option to improve cardiac regeneration, limit adverse LV remodelling and restore function in an infarcted heart. Acellular scaffolds possess attractive features that have made them a promising therapeutic candidate. Their application in infarcted areas has been shown to improve LV remodelling and enhance functional recovery in post-MI hearts. This review will summarise the updates on acellular scaffolds developed and tested in pre-clinical and clinical scenarios in the past five years with a focus on their ability to overcome damage caused by MI. It will also describe how acellular scaffolds alone or in combination with biomolecules have been employed for MI treatment. A better understanding of acellular scaffolds potentialities may guide the development of customised and optimised therapeutic strategies for MI treatment.

Recent Advances in Cardiac Tissue Engineering for the Management of Myocardium Infarction

Myocardium Infarction (MI) is one of the foremost cardiovascular diseases (CVDs) causing death worldwide, and its case numbers are expected to continuously increase in the coming years. Pharmacological interventions have not been at the forefront in ameliorating MI-related morbidity and mortality. Stem cell-based tissue engineering approaches have been extensively explored for their regenerative potential in the infarcted myocardium. Recent studies on microfluidic devices employing stem cells under laboratory set-up have revealed meticulous events pertaining to the pathophysiology of MI occurring at the infarcted site. This discovery also underpins the appropriate conditions in the niche for differentiating stem cells into mature cardiomyocyte-like cells and leads to engineering of the scaffold via mimicking of native cardiac physiological conditions. However, the mode of stem cell-loaded engineered scaffolds delivered to the site of infarction is still a challenging mission, and yet to be translated to the clinical setting. In this review, we have elucidated the various strategies developed using a hydrogel-based system both as encapsulated stem cells and as biocompatible patches loaded with cells and applied at the site of infarction.

[Biocompatibility and effect on bone formation of a native acellular porcine pericardium: Results of in vitro and in vivo]

OBJECTIVE

To examine the morphology and biocompatibility of a native acellular porcine pericardium (APP) in vitro and to evaluate its barrier function and effects on osteogenesis when used in guided bone regeneration (GBR) in vivo.

METHODS

First, the morphology of APP (BonanGen^Ⓡ) was detected using a scanning electron microscope (SEM). Next, for biocompatibility test, proliferation of human bone marrow mesenchymal stem cells (hBMSCs) were determined using cell counting kit-8 (CCK-8) after being seeded 1, 3 and 7 days. Meanwhile, the cells stained with phalloidine and 4, 6-diamidino-2-phenylindole (DAPI) were observed using a confocal laser scanning microscopy (CLSM) to view the morphology of cell adhesion and pattern of cell proliferation on day 5. A 3-Beagle dog model with 18 teeth extraction sockets was used for the further research in vivo. These sites were randomly treated by 3 patterns below: filled with Bio-Oss^Ⓡand coverd by APP membrane (APP group), filled with Bio-Oss^Ⓡand covered by Bio-Gide^Ⓡmembrane (BG group) and natural healing (blank group). Micro-CT and hematoxylin-eosin (HE) were performed after 4 and 12 weeks.

RESULTS

A bilayer and three-dimensional porous ultrastructure was identified for APP through SEM. In vitro, APP facilitated proliferation and adhesion of hBMSCs, especially after 7 days (P < 0.05). In vivo, for the analysis of the whole socket healing, no distinct difference of new bone ratio was found between all the three groups after 4 weeks (P>0.05), however significantly more new bone regeneration was detected in APP group and BG group in comparison to blank group after 12 weeks (P < 0.05). The radio of bone formation below the membrane was significantly higher in APP group and BG group than blank group after 4 and 12 weeks (P < 0.05), however, the difference between APP group and BG group was merely significant in 12 weeks (P < 0.05). Besides, less resorption of buccal crest after 4 weeks and 12 weeks was observed in APP group of a significant difference compared in blank group (P < 0.05). The resorption in BG group was slightly lower than blank group (P>0.05).

CONCLUSION

APP showed considerable biocompatibility and three-dimentional structure. Performing well as a barrier membrane in the dog alveolar ridge preservation model, APP significantly promoted bone regeneration below it and reduced buccal crest resorption. On the basis of this study, APP is a potential osteoconductive and osteoinductive biomaterial.

The sequential effects of a multifactorial detergent based decellularization process on bovine pericardium

Decellularization is a promising method for obtaining extracellular matrix scaffolds (ECM) to be used as replacement material in reconstructive procedures. The effectiveness of decellularization and the alterations to the ECM vary, depending on several factors, including the tissue source, composition and density. With an optimized decellularization process, decellularized scaffolds can preserve the spatial and temporal ECM microenvironment, which play an integral role in modulating cell migration, proliferation and differentiation. The exploration of a variety of decellularization protocols has led to mixed outcomes and comparisons between decellularization protocols could not attribute these differences to any single step in a multiple-step process. This study aimed to characterize the effects of each step of a multifactorial decellularization method on the scaffold structure and mechanical integrity of bovine pericardium. Each step of the decellularization process and the effect on the tissue was assessed using hematoxylin and eosin staining, electron microscopy, total protein, ECM protein and triglyceride quantification. The biomechanical properties were assessed using uniaxial tensile strength testing. Cell lysis occurred mainly during the detergent and alcohol steps. Collagen structural damage occurred during the detergent and alcohol steps, with no significant decreased in collagen concentration. No significant damage to elastin could be shown throughout the process, however glycosaminoglycans were significantly removed by detergent treatment. Triglycerides were removed mostly by the alcohol treatment. The strength of the pericardium decreased somewhat after each step of the protocol. It is important to characterize each decellularization protocol with regards to the decellularization efficiency and the effect on the ECM proteins structure and function to accurately evaluatein vivooutcomes.

Chitosan-Nanocellulose Composites for Regenerative Medicine Applications

Regenerative medicine represents an emerging multidisciplinary field that brings together engineering methods and complexity of life sciences into a unified fundamental understanding of structure-property relationship in micro/nano environment to develop the next generation of scaffolds and hydrogels to restore or improve tissue functions. Chitosan has several unique physico-chemical properties that make it a highly desirable polysaccharide for various applications such as, biomedical, food, nutraceutical, agriculture, packaging, coating, etc. However, the utilization of chitosan in regenerative medicine is often limited due to its inadequate mechanical, barrier and thermal properties. Cellulosic nanomaterials (CNs), owing to their exceptional mechanical strength, ease of chemical modification, biocompatibility and favorable interaction with chitosan, represent an attractive candidate for the fabrication of chitosan/ CNs scaffolds and hydrogels. The unique mechanical and biological properties of the chitosan/CNs bio-nanocomposite make them a material of choice for the development of next generation bio-scaffolds and hydrogels for regenerative medicine applications. In this review, we have summarized the preparation method, mechanical properties, morphology, cytotoxicity/ biocompatibility of chitosan/CNs nanocomposites for regenerative medicine applications, which comprises tissue engineering and wound dressing applications.

Acellular pericardium: A naturally hierarchical, osteoconductive, and osteoinductive biomaterial for guided bone regeneration

There is great demand for an improved barrier membrane with osteogenic potential for guided bone regeneration (GBR). Natural acellular porcine pericardium (APP) is increasingly used in regenerative medicine as a kind of common extracellular matrix materials. This study aimed to investigate its potential application in GBR, especially its osteoconductive and osteoinductive properties. Bio-Gide (BG), a commercial collagen membrane, was set as the control group. APP samples were characterized by physicochemical analyses and their biological effects on human bone mesenchymal stem cells (hBMSCs) and human gingival fibroblasts (hGFs) were also examined. Additionally, the osteogenic potential of APP was tested on a bilateral critical-sized calvarial defect model. We discovered that the smooth surface of APP tended to recruit more hBMSCs. Moreover, promoted proliferation and osteogenic differentiation of hBMSCs was detected on this side of APP, with increased alkaline phosphatase activity and upregulated expression of bone-specific genes. Besides, the rough side of APP showed good biocompatibility and barrier function with hGFs. Histologic observation and analysis of calvarial defect healing over 4 weeks revealed enhanced bone regeneration under APP compared with BG and the control group. The results of this study indicate that APP is a potential osteoconductive and osteoinductive biomaterial for GBR.

In Vivo Assessment of Decellularized Porcine Myocardial Slice as an Acellular Cardiac Patch

Acellular cardiac patches made of various biomaterials have shown to improve heart function after myocardial infarction (MI). Extracellular matrix scaffold derived from a decellularized tissue has unique advantages to serve as an acellular cardiac patch due to its biomimetic nature. In this study, we examined the therapeutic outcomes of using a decellularized porcine myocardium slice (dPMS) as an acellular patch in a rat acute MI model. dPMSs with two different thicknesses (300 and 600 μm) were patched to the infarcted area of the rat myocardium, and their effects on cardiac function and host interactions were assessed. We found that the implanted dPMS firmly attached to host myocardium after implantation and prevented thinning of the left ventricular (LV) wall after an MI. A large number of host cells were identified to infiltrate into the implanted dPMS, and a significant number of vessel structures was observed in the dPMS and infarcted area. We detected a significantly higher density of M2 macrophages in the groups treated with dPMSs as compared to the MI group. Contraction of the LV wall and cardiac functional parameters (left ventricular ejection fraction and fractional shortening) was significantly improved in the treatment groups (300 and 600 μm dPMS) 4 weeks after surgery. Our results proved the therapeutic benefits of using dPMS as an acellular cardiac patch for the treatment of acute myocardial infarction.

Development and characterization of bladder acellular matrix cross-linked by dialdehyde carboxymethyl cellulose for bladder tissue engineering

In order to address the disadvantage of rapid degradation and serious immune response of bladder acellular matrix (BAM) tissues in clinical application, in this study, oxidized carboxymethyl cellulose (DCMC) was developed to replace glutaraldehyde (GA), a most common synthetic crosslinking reagent in clinical practice, to fix BAM tissues for lower cytotoxicity. The aim of this work was to evaluate feasibility of DCMC as a crosslinking reagent for BAM fixation and developing DCMC fixed-BAM (D-BAM) tissues for tissue engineering. For the preparation of DCMC, the results showed that when DCMC was prepared using a specific concentration of sodium periodate solution (the mass ratio of NaIO₄/CMC is 1 : 1) and a specific reaction time (4 hours), its cytotoxicity was the lowest and its fixation effect was better. The critical crosslinking characteristics and cytocompatibility of optimum D-BAM tissues were also investigated. The results demonstrated that DCMC-fixation (especially 30 mg ml⁻¹ DCMC-fixation) not only formed stable cross-linking bonds but also preserved well the original ultrastructure of the BAM tissues, which simultaneously increased the mechanical strength and capacity of the enzymatic hydrolytic resistance. The DCMC-fixation could also reduce the expression of α-Gal in BAM tissues and preserve the useful growth factors such as GAGs, KGF and TGF-β in bladder tissues. In addition, 30 mg ml⁻¹ D-BAM tissues had excellent cytocompatibility. Moreover, it could stimulate the secretion of PDGF and EGF from seeded bladder transitional epithelial cells (BTECs), which is a critical feature for further re-epithelialization. Its anti-calcification ability was also prominent, which is necessary in bladder repair. The present studies demonstrated that DCMC could be a potential biological crosslinking agent for BAM fixation due to its excellent crosslinking effects, and the D-BAM tissues were suitable to be used as a substitute for the bladder due to their resistance to enzymatic degradation, anticalcification and cytocompatibility.

To address the disadvantage of rapid degradation and serious immune response of bladder acellular matrix tissues in clinical application, oxidized carboxymethyl cellulose was developed to replace commonly used glutaraldehyde, to fix BAM tissues for lower cytotoxicity.

The Yin and Yang of carbon nanomaterials in atherosclerosis

With unique characteristics such as high surface area, capacity of various functionalization, low weight, high conductivity, thermal and chemical stability, and free radical scavenging, carbon nanomaterials (CNMs) such as carbon nanotubes (CNTs), fullerene, graphene (oxide), carbon nanohorns (CNHs), and their derivatives have increasingly been utilized in nanomedicine and biomedicine. On the one hand, owing to ever-increasing applications of CNMs in technological and industrial fields as well as presence of combustion-derived CNMs in the ambient air, the skepticism has risen over the adverse effects of CNMs on human being. The influences of CNMs on cardiovascular system and cardiovascular diseases (CVDs) such as atherosclerosis, of which consequences are ischemic heart disease and ischemic stroke, as the main causes of death, is of paramount importance. In this regard, several studies have been devoted to specify the biomedical applications and cardiovascular toxicity of CNMs. Therefore, the aim of this review is to specify the roles and applications of various CNMs in atherosclerosis, and also identify the key role playing parameters in cardiovascular toxicity of CNMs so as to be a clue for prospective deployment of CNMs.

Analysis of structure and properties of antibacterial vascular patch used in abdominal aorta aneurysm surgeries

BACKGROUND

Biocompatible materials are used for treatment of blood circulatory system diseases, especially abdominal aortic aneurysms. The most popular and often used are knitted and polymer vascular patches. The aim of this study was to optimize the manufacturing process of implantable materials, ensuring antibacterial activity useful for treating abdominal aorta aneurysms.

METHODS

The vascular patch was manufactured from Trevira® yarn. The parameters of the intermediate product and vascular patch were tested according to standard procedures.

RESULTS

The vascular patch, manufactured from microsilver-containing yarn, with crimps on the surface of the patch, has been found useful for treatment of abdominal aorta aneurysms. Introducing crimps on the surface of the patch resulted in reduction of water permeability and enabled cutting of the graft at various angles without fraying at the cut ends of the biomaterial. The final vascular patch was marked by a gradual release of silver within 48 hours.

CONCLUSIONS

On the basis of the performed test, it has been demonstrated that an implantable material for the treatment of abdominal aorta aneurysms was obtained, and that it can be considered as an alternative for currently used vascular patches. The final vascular patch was marked by a gradual release of silver during the first period of incubation. The antibacterial properties of the final product were confirmed by observation of a significant reduction in the number of Staphylococcus aureus and Klebsiella pneumoniae bacterial colonies.

Preparation and investigation of novel SrCl2/DCMC-modified (via DOPA) decellularized arteries with excellent physicochemical properties and cytocompatibility for vascular scaffolds

A new method of fabricating vascular scaffolds was designed in this article by crosslinking the porcine arteries using dialdehyde carboxymethyl (DCMC) and further introducing the Sr element on the surface of modified arteries using DOPA. DCMC had been selected as an ideal crosslinking reagent for its excellent cytobiocompatibility and suitable chemical reactivity. Unfortunately, the endothelialization of biological vascular scaffolds fixed by DCMC was unsatisfactory. To overcome this deficiency, the Sr element was introduced onto arteries to improve the endothelialization of fixed arteries due to the Sr element being able to promote the expression of vascular endothelial growth factor (VEGF) being crucial for growth and proliferation of HUVECs. After modifying and crosslinking, their chemical structures, mechanical properties, stability, and cytocompatibility were examined. Our findings demonstrated that DCMC could improve the mechanical properties of animal-derived materials successfully and possess suitable biocompatibility compared with glutaraldehyde (GA). The Sr element can easily be introduced onto the surface of DCMC modified arteries by DOPA. Compared with purely DCMC-crosslinked ones, SrCl₂/DCMC modification has no significant effect on the mechanical strength of fixed arteries, but a slight tendancy to improve the stability of fixed samples in D-Hanks solution. MTT assay and fluorescence tests implied that SrCl₂/DCMC modification could effectively stimulate HUVECs' adhesion and proliferation, and thus promote the endothelialization process of fixed arteries. SrCl₂/DCMC-modified arteries with excellent physicochemical properties and appealing HUVEC-cytocompatibility should be promising materials for fabricating vascular scaffolds.

A new method of fabricating vascular scaffolds was designed in this article by crosslinking the porcine arteries using dialdehyde carboxymethyl (DCMC) and further introducing the Sr element on the surface of modified arteries using DOPA.

Biocompatibility and anti-calcification of a biological artery immobilized with naturally-occurring phytic acid as the crosslinking agent

Phytic acid is introduced as a biological crosslinker to fix natural arteries; the fixed tissues possess rapid endothelialization and excellent anticalcification properties.