Establishment of new preparation method for solid dispersion formulation of tacrolimus

Case study: cremophor EL-based liquid formulations as simple substitutes for amorphous solid dispersions in early preclinical in vivo studies

OBJECTIVES

The objective of the present case study was to increase the exposure of the poorly soluble crystalline compound A.

METHODS

Mice received 10 mg/kg of crystalline compound A formulated in eight different cosolvent, oil, and cyclodextrin mixtures.

KEY FINDINGS

In all cases, AUC0-24h and maximum blood/plasma concentration (Cmax) were in the range of 6-16 µM × h and <1.4 µm, respectively, with a bioavailability below 18%. When 6% cremophor (CrEL) was added to three selected vehicles, AUC0-24h and Cmax increased ~5-10 times. The obtained pharmacokinetic profile of the most improved formulation using CrEL was possible to superimpose on the one obtained after administration of a CrEL-free amorphous solid dispersion (ASD, HPMC-AS:drug, 80:20) suspension of compound A.

CONCLUSIONS

It is crucial to find an optimal screen vehicle as early as possible for a poorly water-soluble lead series and then avoid time and resource-consuming vehicle testing of multiple compounds in vivo. An ASD approach is more suited for clinical development when more time and resources are allocated to the project. In this case study, some preclinical formulations were used to maximize exposure but also as preindicators for ASDs later in the development chain.

Enhanced Tacrolimus efficacy in psoriasis with innovative transethosomes: a promising preclinical study on Wistar rats

AIM

This study focuses on the formulation and evaluation of Tacrolimus-loaded transethosomes, which are then incorporated into a gel for topical application. The goal is to achieve deeper transdermal penetration, enhancing the treatment regimen.

METHODS

Transethosomes were formulated using the cold method and optimized using 32 factorial design (DESIGN EXPERT® Software) using different concentrations of lipid and ethanol. They were characterized for vesicle size, entrapment efficiency, zeta potential, and polydispersity index. The optimized batch was incorporated into the carbopol 940 gel base. In vitro and ex vivo permeation studies were carried out to determine the diffusion and release pattern. Skin irritancy and in vivo imiquimoid-induced anti-psoriatic activity were carried out on Wistar rats.

RESULTS

The F1 batch, characterized by a low concentration of ethanol and lipids, demonstrated a vesicle size of 168 nm, an entrapment efficiency of 85%, a zeta potential of -36 mV, and a polydispersity index of 0.12. In vitro release studies indicated an 85.32% drug release and a 76.34% drug permeation after 24 h. The drug release adhered to zero-order kinetics, with the Korsmeyer-Peppas model suggesting a non-Fickian diffusion mechanism. In vivo studies of Tacrolimus-loaded transethosomal gel in an imiquimod-induced psoriasis-like rat model demonstrated significant therapeutic effects within seven days. Histopathological analysis showed reduced hyperkeratosis, epidermal hyperplasia, and inflammation, with fewer inflammatory cells in the dermis. Stability tests confirmed the formulation's integrity at 4 and 25 °C over 90 days.

CONCLUSION

The study's outcome revealed that tacrolimus-loaded transethosomes could effectively manage psoriasis.

Optimization and assessment of three generation solid dispersion for enhancement of solubility and dissolution for montelukast sodium

OBJECTIVE

To enhance the solubility of Montelukast sodium using three generation polymers by solid dispersion method.

MATERIAL AND METHOD

Montelukast sodium with selected generation of carriers were used for phase solubility and to optimize the stoichiometric ratio for the preparation of SD with MS. Various characterization techniques (FTIR, DSC and XRD) have been used to evaluate the MS-SD formulations with selected hydrophilic carriers. Dissolution and stability study were also investigated.

RESULT AND DISCUSSION

The two best-selected formulations (MS-PVP & MS-HPMC SD) have shown the highest dissolution profile as compared to pure drug, physical mixture and commercially available marketed product (Montel-10, Cipla). The FTIR, DSC and XRD results of these SD formulations have shown interaction between drug and polymers, decrease in enthalpy compared to the drug and amorphous behavior respectively. Finally, MS-PVP & MS-HPMC SD formulations have shown good stability for one-month period under accelerated storage condition.

CONCLUSION

The study showed increase in solubility of Montelukast sodium with second generation polymers (PVP & HPMC) in comparison to pure drug as well as marketed formulation.

Biofunctional Excipients: Their Emerging Role in Overcoming the Inherent Poor Biopharmaceutical Characteristics of Drugs

Background/Objectives: With advancements in biomaterial sciences, biofunctional excipients have emerged to focus on solving issues with the drugs' inherent biopharmaceutical characteristics such as poor solubility, permeability, in vivo dissolution, and effective targeting. These advanced excipients significantly impact drug solubility, dissolution rates, absorption rates, permeation rates, penetration ability, targeting ability, and pharmacokinetic profiles. Methods: A literature review of recently published articles was prepared. Data were collected using scientific search engines. This review provided a detailed discussion of various biofunctional excipients including smart polymers, targeted polymers, bioadhesive polymers, lipids, amino acids, cyclodextrins, and biosurfactants. Each category was discussed in detail concerning its biofunctional applications, the mechanisms underlying these biofunctions, and examples of their effects on drug performance. Results: The data obtained indicated that the rapid advances in the manufacturing of pharmaceutical excipients have resulted in the development of a diverse array of smart or intelligent excipients that play a crucial role in enhancing inherent poor biopharmaceutical characteristics. Conclusions: These advancements have also facilitated the development of various drug delivery systems, including immediate, controlled, sustained, and targeted drug release systems. Also, numerous nano-based delivery systems have emerged utilizing the newly produced excipients.

From Unwanted Annoyances to Oral Delivery Saviors: The Rollercoaster Journey of Amorphous Drugs

The benefits and disadvantages of amorphous drugs have been topics of discussion for nearly a century. In the post-World War II era when drug discovery burgeoned, amorphous drugs were largely regarded as unfavorable forms for commercial products. This sentiment began to change as the number of poorly water-soluble drugs, which targeted a broader range of disease states and emerged from high throughput screening assays, began to increase. The solubility advantage of amorphous drugs was long recognized at this juncture, but unease persisted over potential conversions back to the less soluble crystal form during product storage. Successful development of early amorphous products based on amorphous solid dispersion formulations, where a suitable polymer is molecularly mixed with the drug resulting in inhibition of drug crystallization, gradually mitigated concerns. This historical perspective of amorphous drugs provides an overview of timelines and key milestones and culminates by considering remaining challenges and the future outlook.

Changes in drug crystallinity in a commercial tacrolimus amorphous formulation result in variable pharmacokinetics

Tacrolimus capsules contain the drug as the amorphous form. It is well known that drug crystallinity is a risk factor for the performance of amorphous formulations. This study investigated the impact of varying levels of crystalline drug on the pharmacokinetics of tacrolimus following oral dosing of a 5 mg capsule under fasting conditions. Two treatments with percent crystallinity of 20% and 50% were achieved by exposing a marketed generic tacrolimus product to open dish storage conditions of 35 °C and 75% relative humidity (RH) for up to 20 days. Crystallinity was monitored with X-ray powder diffraction. Prograf®, the reference listed drug (RLD), an amorphous generic drug product, and generic drug products containing 20% and 50% crystalline tacrolimus were evaluated. All four treatments were administered to healthy participants in a randomized, single-dose, four-treatment, four-period, four-way crossover study. Blood sampling occurred over 24 h. The amorphous generic tacrolimus product was determined not to be bioequivalent to the RLD. The capsules containing both 20% and 50% crystalline tacrolimus also failed the bioequivalence recommendations when compared to the amorphous generic or to the RLD. Both levels of crystalline tacrolimus resulted in BE failure for both Cmax and AUC parameters. The impact of tacrolimus crystallization was greater for maximum blood concentration (Cmax) values relative to the area-under-the-curve (AUC) values. This study demonstrates that crystalline tacrolimus formed in a marketed generic product and these changes resulted in variable pharmacokinetics which could be of significant clinical concern.

Spring and parachute approach for piroxicam dissolution; its phenomenological model on the thermodynamics of irreversible processes

Even though the spring and parachute approach for poorly water-soluble drug candidates effectively improves their dissolution curves with eutectic mixtures, deep eutectic solvents, solid dispersion polymers, and solid solutions, we cannot consider that its enabling factor in these pharmaceutical modifications was enough to be clarified. Based on our previous study that oxybuprocaine acts as a role of parachute generator for piroxicam, the present study explored a small-molecule parachute generator and found that propranolol, a β-adrenergic-blocking drug, has a parachute effect on the supersaturated state of piroxicam. In addition, changing the concentration of tetracaine and dibucaine to 10 mM and 2.5 mM also showed a parachute effect. These parachute generators control piroxicam's dissolved state kinetically by making the supersaturated state of piroxicam a steady state. However, as the piroxicam anhydrous crystals diminished and the piroxicam monohydrate crystals grew due to Ostwald ripening, it led to attenuating the supersaturated state. This finding advances the elucidation of the mechanism of the parachute effect of polymers.

Near-infrared imaging of in vivo performance of orally administered solid forms to rats: Feasibility study with indocyanine green

This study demonstrates the applicability of near-infrared (NIR) imaging to evaluating in vivo oral formulation performance. As a NIR probe and model drug, indocyanine green (ICG) and acetaminophen (ACE) were selected, respectively. The fluorescence intensity of ICG greatly increased upon dissolution, with the dissolved ICG passing through the gastrointestinal tract over time. Both compounds (0.05 mg of ICG and 0.5 mg of ACE) were encapsulated in gelatin and hydroxypropyl methylcellulose (HPMC) capsules in the solid form. In vitro, the HPMC capsules showed a disintegration lag time, a feature that was not observed for the gelatin capsules. After oral administration of each capsule to rats, blood samples were collected, followed by fluorescent imaging of the abdominal region. At 0.25 h after HPMC capsule administration, the fluorescence area and intensity were significantly small and relatively weak compared to that of the gelatin capsule. These tendencies resulted from the difference in capsule disintegration times, leading to a change in gastric emptying, which corresponded well with the initial time profile of the plasma concentration of ACE. These results indicate that possibility of NIR imaging with ICG to evaluate in vivo performance of orally administered formulations.

Recent Applications of Quantum Dots in Pharmaceutical Analysis

Nanotechnology has emerged as one of the most potential areas for pharmaceutical analysis. The need for nanomaterials in pharmaceutical analysis is comprehended in terms of economic challenges, health and safety concerns. Quantum dots (QDs)or colloidal semiconductor nanocrystals are new groups of fluorescent nanoparticles that bind nanotechnology to drug analysis. Because of their special physicochemical characteristics and small size, QDs are thought to be promising candidates for the electrical and luminescent probes development. They were originally developed as luminescent biological labels, but are now discovering new analytical chemistry applications, where their photo-luminescent properties are used in pharmaceutical, clinical analysis, food quality control and environmental monitoring. In this review, we discuss QDs regarding properties and advantages, advances in methods of synthesis and their recent applications in drug analysis in the recent last years.

Oral Drug Delivery Systems Applied to Launched Products: Value for the Patients and Industrial Considerations

Drug delivery systems (DDS) control the amount, rate, and site of administration of drug substances in the body as well as their release and ADME (absorption, distribution, metabolism, excretion). Among the various types of DDS, amount-controlled DDS for solubilization and absorption increase the bioavailability. Time- and amount-controlled DDS are controlled release formulations classified as (1) membrane-type, (2) matrix-type, (3) osmotic-type, and (4) ion-exchange type. Timed-release formulations also control the time and amount of release and the absorption of drugs. Site- and amount-controlled DDS are characterized by colonic delivery and intestinal lymph-targeting to improve release and ADME of drug substances. Finally, site-, time-, and amount-controlled DDS are gastroretentive formulations and local delivery in the oral cavity to improve site retention, release, and ADME of drugs. DDS can enhance efficacy, reduce adverse effects, and optimize the dosing frequency of various drug products to increase patient value. This review focuses on patient value and industrial considerations of launched oral DDS. We provide a technological overview of candidate and marketed DDS, as well as the pros/cons of the technologies for industrialization with consideration to excipients, manufacturing, and storage stability. Moreover, to demonstrate the usefulness of the technology and support the selection and development of the best technologies for patients, we also describe patient value from clinical studies and analyses, particularly with regard to increased new medical options, higher efficacy, reduced adverse effects, reduced number of doses and clinic visits, easier administration, higher quality of life, greater adherence, and satisfaction.

Nanotechnology-Based Strategies for Extended-Release Delivery of Angiotensin Receptor Blockers (ARBs): A Comprehensive Review

There has been a significant shift in the perception of hypertension as an important contributor to the global disease burden. Approximately 6 % and 8 % of pregnancies are affected by hypertension, which can adversely affect the mother and the fetus. Furthermore, a hypertensive individual is at increased risk of developing kidney disease, arterial hardening, eye damage, and strokes. Using angiotensin receptor blockers (ARBs) is widespread in treating hypertension, heart failure, coronary artery disease, and diabetic nephropathy. Despite this, some ARBs have limited use due to their poor oral bioavailability and water solubility. To tackle this, a variety of nanoparticle (NP)-based systems, such as polymeric NPs (i. e., dendrimers), polymeric micelles, polymer-drug conjugates, lipid NPs, nanoemulsions, self-emulsifying drug delivery systems (SEDDS), solid lipid NPs (SLNs), nanostructured lipid carriers (NLCs), carbon-based nanocarriers, inorganic NPs, and nanocrystals, have been recently developed for efficient delivery of losartan, Valsartan (Val), Olmesartan (OLM), Telmisartan (TEL), Candesartan, Eprosartan, Irbesartan, and Azilsartan to target cells. This review article provides a literature-based comparison of the various classes of ARBs, their mechanisms of action, and an overview of the nanoformulations developed for ARB delivery and successfully applied to managing hypertension, diabetic complications, and other conditions.

Advances in the development of amorphous solid dispersions: The role of polymeric carriers

Amorphous solid dispersion (ASD) is one of the most effective approaches for delivering poorly soluble drugs. In ASDs, polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level. To prepare the solid dispersions, there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations. Polymer selection is of great importance because it influences the stability, solubility and dissolution rates, manufacturing process, and bioavailability of the ASD. This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers, formulation designs and preparation methods. Furthermore, considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.

Statistically Optimized Tacrolimus and Thymoquinone Co-Loaded Nanostructured Lipid Carriers Gel for Improved Topical Treatment of Psoriasis

The aim of this investigation was to develop and analyze a tacrolimus and thymoquinone co-loaded nanostructured lipid carriers (TAC-THQ-NLCs)-based nanogel as a new combinatorial approach for the treatment of psoriasis. The NLCs were formulated by an emulsification-solvent-evaporation technique using glyceryl monostearate, Capryol 90 (oil), and a mixture of Tween 80 and Span 20 as a solid lipid, liquid lipid, and surfactant, respectively. Their combination was optimized using a three-factor and three-level Box-Behnken design (3³-BBD). The optimized TAC-THQ-NLCs were observed to be smooth and spherical with a particle size of 144.95 ± 2.80 nm, a polydispersity index of 0.160 ± 0.021, a zeta potential of -29.47 ± 1.9 mV, and an entrapment efficiency of >70% for both drugs. DSC and PXRD studies demonstrated the amorphous state of TAC and THQ in the lipid matrix of the NLCs. An FTIR analysis demonstrated the excellent compatibility of the drugs with the excipients without interactions. The TAC-THQ-NLC-based nanogel (abbreviated as TAC-THQ-NG) exhibited a good texture profile and good spreadability. The in vitro release study demonstrated a sustained drug release for 24 h from the TAC-THQ-NG that followed the Korsmeyer-Peppas kinetic model with a Fickian diffusion mechanism. Moreover, the TAC-THQ-NG revealed significantly higher dose-dependent toxicity against an HaCaT cell line compared to a TAC-THQ suspension gel (abbreviated as TAC-THQ-SG). Furthermore, the developed formulations demonstrated antioxidant activity comparable to free THQ. Confocal microscopy revealed improved permeation depth of the dye-loaded nanogel in the skin compared to the suspension gel. Based on these findings, it was concluded that TAC-THQ-NG is a promising combinatorial treatment approach for psoriasis.

Prediction of Liquid-Liquid Phase Separation at the Dissolving Drug Salt Particle Surface

During the dissolution of drug salt particles, liquid-liquid phase separation (LLPS) of a free form can occur within the unstirred water layer (UWL) of the particles (UWL-LLPS). Theoretically, UWL-LLPS occurs when the free form concentration at the salt particle surface (C₀) exceeds the intrinsic LLPS concentration (S₀^LLPS) of the free form. In the present study, we attempted to predict UWL-LLPS based on the intrinsic physicochemical properties of drugs. Cyproheptadine hydrochloride (CPH-HCl), diclofenac sodium (DCF-Na), papaverine hydrochloride (PAP-HCl), and propafenone hydrochloride (PRF-HCl) were selected as model drug salts. The pH₀ and C₀ values at pHs 4.0-9.5 (citric acid, phosphoric acid, and boric acid, buffer capacity = ca. 4 mM/ΔpH) were calculated using the pK_a, solubility product (K_sp), and diffusion coefficient (D) of a drug. S₀^LLPS was measured using the pH-shift method. UWL-LLPS was predicted to occur when C₀ ≥ S₀^LLPS. The prediction result was then compared with UWL-LLPS observed at each pH by polarized light microscopy (PLM). The pH-LLPS concentration (S_pH^LLPS) profile of each drug was also measured. UWL-LLPS was approximately correctly predicted for CPH-HCl, DCF-Na, and PRF-HCl. However, UWL-LLPS was not observable when C₀ was close to S₀^LLPS. Furthermore, UWL-LLPS was not accurately predicted in the case of PAP-HCl. The pH-S_pH^LLPS profile of PAP did not follow the Henderson-Hasselbalch equation, probably because of the formation of cationic aggregates. In conclusion, UWL-LLPS was approximately predictable for drug salts using their intrinsic physicochemical properties (K_sp, pK_a, D, and S₀^LLPS), except for PAP-HCl.

Application of Sucrose Acetate Isobutyrate in Development of Co-Amorphous Formulations of Tacrolimus for Bioavailability Enhancement

The focus of the present work was to develop co-amorphous dispersion (CAD) formulations of tacrolimus (TAC) using sucrose acetate isobutyrate as a carrier, evaluate by in vitro and in vivo methods and compare its performance with hydroxypropyl methylcellulose (HPMC) based amorphous solid dispersion (ASD) formulation. CAD and ASD formulations were prepared by solvent evaporation method followed by characterization by Fourier transformed infrared spectroscopy, X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), dissolution, stability, and pharmacokinetics. XRPD and DSC indicated amorphous phase transformation of the drug in the CAD and ASD formulations, and dissolved more than 85% of the drug in 90 min. No drug crystallization was observed in the thermogram and diffractogram of the formulations after storage at 25 °C/60% RH and 40 °C/75% RH. No significant change in the dissolution profile was observed after and before storage. SAIB-based CAD and HPMC-based ASD formulations were bioequivalent as they met 90% confidence of 90-11.1% for C_max and AUC. The CAD and ASD formulations exhibited C_max and AUC 1.7-1.8 and 1.5-1.8 folds of tablet formulations containing the drug's crystalline phase. In conclusion, the stability, dissolution, and pharmacokinetic performance of SAIB-based CAD and HPMC-based ASD formulations were similar, and thus clinical performance would be similar.

Detecting Crystallinity in Amorphous Solid Dispersions Using Dissolution Testing: Considerations on Properties of Drug Substance, Drug Product, and Selection of Dissolution Media

Dissolution testing has long been used to monitor product quality. Its role in quality control of amorphous solid dispersion (ASD) formulations is relatively new. In the presence of the crystalline phase, the dissolution of ASDs is determined by the dynamics between the dissolution rate of the amorphous solids and the rate of crystal growth. The detection of crystalline phase by dissolution test has not been well understood in the context of drug properties, formulation characteristics and dissolution test variables. This study systematically evaluated the impact of key parameters such as intrinsic crystallization tendency of the API, drug loading, extent of dissolution sink conditions and level of crystallinity on the ASD dissolution behavior. The results indicated diverse dissolution behaviors due to the differences in the intrinsic crystallization propensity of the drug, the drug loading, the ASD polymers and the dissolution sink index. Each of the complex dissolution profiles were interpreted based on visual observations during dissolution, the appropriate sink index based on the amorphous solubility, and the competition between drug dissolution versus crystallization. The findings of this study provide insights towards the various considerations that should be taken into account towards rationally developing a discriminatory dissolution method.

Carvedilol Precipitation Inhibition by the Incorporation of Polymeric Precipitation Inhibitors Using a Stable Amorphous Solid Dispersion Approach: Formulation, Characterization, and In Vitro In Vivo Evaluation

An amorphous solid dispersion (ASD) of carvedilol (CVL) was prepared via the solvent evaporation method, using cellulose derivatives as polymeric precipitation inhibitors (PPIs). The prepared ASDs existed in the amorphous phase, as revealed by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The Fourier-transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) results confirmed the compatibility between CVL and the polymers used. The ASDs characteristics were evaluated, with no change in viscosity, a pH of 6.8, a polydispersity index of 0.169, a particle size of 423-450 nm, and a zeta potential of 3.80 mV. Crystal growth inhibition was assessed for 180 min via an infusion precipitation study in simulated intestinal fluid (SIF). The interactions between the drug and polymers were established in great detail, using nuclear magnetic resonance (NMR) spectroscopy, nuclear Overhauser effect spectroscopy (NOESY), and Raman spectroscopy studies. Dielectric analysis was employed to determine the drug-polymer interactions between ion pairs and to understand ion transport behavior. In vivo oral kinetics and irritation studies performed on Wistar rats have demonstrated promising biocompatibility, stability, and the enhanced bioavailability of CVL. Collectively, the stable ASDs of CVL were developed using cellulose polymers as PPIs that would inhibit drug precipitation in the gastrointestinal tract and would aid in achieving higher in vivo drug stability and bioavailability.

Fabrication of Hydroxypropyl Methylcellulose Orodispersible Film Loaded Mirtazapine Using a Syringe Extrusion 3D Printer

Depression is a mental illness causing a continuous negative feeling and loss of interest and affects physical and mental health. Mirtazapine (MTZ) is an effective medicine for treating depression, but patients lack compliance. However, transforming a pharmaceutical dosage form to an orodispersible film (ODF) could resolve this issue. This study aims to fabricate ODF-loading mirtazapine, using a syringe extrusion 3D printer, and compare its properties with the solvent-casting method. The ODFs were prepared by dissolving the mirtazapine in a hydroxypropyl methylcellulose E15 solution, and then fabricated by a 3D printer or casting. The 3D printing was accurate and precise in fabricating the ODFs. The SEM micrographs showed that the mirtazapine-printed ODF (3D-MTZ) was porous, with crystals of mirtazapine on the film’s surface. The 3D-MTZ exhibited better mechanical properties than the mirtazapine-casted ODF (C-MTZ), due to the 3D-printing process. The disintegration time of the 3D-MTZ in a simulated salivary fluid, pH 6.8 at 37 °C, was 24.38 s, which is faster than the C-MTZ (46.75 s). The in vitro dissolution study, in 0.1 N HCl at 37 °C, found the 3D-MTZ quickly released the drug by more than 80% in 5 min. This study manifested that 3D-printing technology can potentially be applied for the fabrication of ODF-containing mirtazapine.

Tacrolimus nanocrystals microneedle patch for plaque psoriasis

Plaque psoriasis is characterized by an abnormal thickening of the epidermis, which causes great difficulties for traditional topical drug delivery. Microneedles can pierce the thickened epidermis and deliver drugs to the skin for psoriasis treatment. Tacrolimus is a poorly water-soluble immunosuppressant used for the treatment of psoriasis. In this study, tacrolimus (TAC) nanocrystals (NCs) were produced using a bottom-up technique that dispersed TAC into a sodium hyaluronate-based microneedle patch (MNP), and its therapeutic efficacy was evaluated. The average particle size of the TAC NCs was 259.6 ± 2.3 nm. The mechanical strength of the microneedles was 0.41 ± 0.06 N/needle, which was sufficient to penetrate psoriatic skin. Microneedles were detached from the substrate 10 min after insertion into the psoriasis skin with an insertion depth of 258.8 ± 14.4 μm. The intradermal retention of the MNP (8.40 ± 0.33 μg/cm²) was six times that of the commercial ointment (1.40 ± 0.12 μg/cm²). In pharmacodynamic experiments, results indicated improvement in the phenotypic and histopathological features and reduction in the level of TNF-α, IL-17A, and IL-23 of psoriatic skin treated with TAC NCs MNP. Therefore, MNP loaded with TAC NCs may be a promising approach for psoriasis treatment.

Characterization and In Vitro and In Vivo Evaluation of Tacrolimus-Loaded Poly(ε-Caprolactone) Nanocapsules for the Management of Atopic Dermatitis

BACKGROUND

Tacrolimus (TAC) is a drug of natural origin used in conventional topical dosage forms to control atopic dermatitis. However, direct application of the drug often causes adverse side effects in some patients. Hence, drug nanoencapsulation could be used as an improved novel therapy to mitigate the adverse effects and enhance bioavailability of the drug.

METHODS

Physicochemical properties, in vitro drug release experiments, and in vivo anti-inflammatory activity studies were performed.

RESULTS

TAC-loaded nanocapsules were successfully prepared by the interfacial deposition of preformed polymer using poly(ε-caprolactone) (PCL). The nanoparticulate systems presented a spherical shape with a smooth and regular surface, adequate diameter (226 to 250 nm), polydispersity index below 0.3, and suitable electrical stability (-38 to -42 mV). X-ray diffraction confirmed that the encapsulation method provided mainly the drug molecular dispersion in the nanocapsule oily core. Fourier-transform infrared spectra suggested that nanoencapsulation did not result in chemical bonds between drug and polymer. In vitro drug dissolution experiments showed a controlled release with a slight initial burst. The release kinetics showed zero-order kinetics. As per the Korsmeyer-Peppas model, anomalous transport features were observed. TAC-loaded PCL nanocapsules exhibited excellent anti-inflammatory activity when compared to the free drug.

CONCLUSIONS

TAC-loaded PCL nanocapsules can be suitably used as a novel nano-based dosage form to control atopic dermatitis.

A Hydroxypropyl Methylcellulose Film Loaded with AFCP Nanoparticles for Inhibiting Formation of Enamel White Spot Lesions

Objective

This study investigated the effects of mineralizing film consisting of hydroxypropyl methylcellulose (HPMC) and amorphous fluorinated calcium phosphate (AFCP) nanoparticles on enamel white spot lesions (WSLs).

Material and Methods

The AFCP nanoparticles and mineralizing film were prepared via nanoprecipitation and solvent evaporation, respectively. They were characterized with Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), inductively coupled plasma atomic emission spectrometry (ICP-AES), and fluoride ion selective electrode. Thirty-two human enamel slices (4 mm × 4 mm × 1.5 mm) were highly polished and randomly assigned to four groups: negative control (no treatment); pure HPMC film; mineralizing film; GC Tooth Mousse Plus^® (contains 10% CPP-ACP and 0.2% NaF). Subsequently, samples were challenged by a modified pH-cycling and characterized by color measurement, Micro-CT, SEM/EDX, and nanoindentation.

Results

The mineralizing film could sustain release of Ca, P and F ions over 24 h and maintain AFCP nanoparticles in metastable state over 8~12 h. During 4 weeks of pH cycling, the mineralizing film group exhibited least color change (∆E), mineral loss and lesion depth (120 ± 10 µm) among four groups (p < 0.05). SEM findings revealed that the porosities among enamel crystals increased in negative control and pure HPMC film groups after pH cycling, whereas in mineralizing film group, the original microstructure of enamel was well conserved and mineral deposits were detected between enamel prisms. Mineralizing film group demonstrated a least reduction of nanomechanical properties such as elastic modulus of 77.02 ± 6.84 GPa and hardness of 3.62 ± 0.57 GPa (p < 0.05).

Conclusion

The mineralizing film might be a promising strategy for prevention and management of WSLs via inhibiting enamel demineralization and promoting enamel remineralization.

Tacrolimus encapsulated mesoporous silica nanoparticles embedded hydrogel for the treatment of atopic dermatitis

Atopic dermatitis (AD) is a repetitive inflammatory skin disorder with limited treatment options. Innovative targeted therapies are gaining significant interest and momentum towards disease control including better ways to deliver drugs topically. Tacrolimus is one such compound which is used to manage moderate to severe AD without causing atrophy which is one of the common side effects of steroids. However, Tacrolimus suffers from poor solubility and retention in the skin when used alone in hydrogel. Therefore, we have prepared Tacrolimus loaded mesoporous silica nanoparticles (TMSNs) to overcome the issues related to its solubility and effective topical delivery. Mesoporous silica nanoparticles (MSNs) were synthesized using sol gel technique and surface functionalized using amino (-NH₂⁺) and phosphonate (-PO₃^-) groups. Tacrolimus was loaded into MSNs and the particles were characterized for particle size (TEM and DLS), zeta potential (DLS), solubility studies, FTIR, TGA, XRD, BET and cytotoxicity studies. Water solubility of Tacrolimus was increased by 7 folds with phosphonate functionalized MSNs compared to free Tacrolimus. Further the TMSNs were incorporated in to carbopol gel, and the gel formulation was evaluated for various gel characterization tests (pH, spreadability, viscosity), in vitro tests (drug release, permeability studies) and in vivo tests (skin irritation study and efficacy studies) using 1-Fluoro-2,4-dinitrobenzene (DNFB) induced dermatitis in Balb/c mice. Results of in vitro and in vivo study showed that TMSNs loaded gel showed significantly higher amount of Tacrolimus retained (ex vivo - rat skin) and much higher reduction in ear thickness and improved histology (in vivo - in mice). Our data collectively suggest that MSNs incorporated hydrogel as a promising new formulation strategy for topical delivery of poorly soluble drugs.

Characterization of Amorphous Solid Dispersions and Identification of Low Levels of Crystallinity by Transmission Electron Microscopy

Amorphous solid dispersions (ASDs) are used to increase the solubility of oral medicines by kinetically stabilizing the more soluble amorphous phase of an active pharmaceutical ingredient with a suitable amorphous polymer. Low levels of a crystalline material in an ASD can negatively impact the desired dissolution properties of the drug. Characterization techniques such as powder X-ray diffraction (pXRD), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR) are often used to detect and measure any crystallinity within ASDs. These techniques are unable to detect or quantify very low levels because they have limits of detection typically in the order of 1-5%. Herein, an ASD of felodipine (FEL) and polyvinylpyrrolidone/vinyl acetate copolymer (PVP/VA) prepared via a hot melt extrusion (HME) in a mass ratio of 30:70 was characterized using a range of techniques. No signs of residual crystallinity were found by pXRD, DSC, or FTIR. However, transmission electron microscopy (TEM) did identify two areas containing crystals at the edges of milled particles from a total of 55 examined. Both crystalline areas contained Cl Kα X-ray peaks when measured by energy-dispersive X-ray spectroscopy, confirming the presence of FEL (due to the presence of Cl atoms in FEL and not in PVP/VA). Further analysis was carried out by TEM using conical dark field (DF) imaging of a HME ASD of 50:50 FEL-PVP/VA to provide insights into the recrystallization process that occurs at the edges of particles during accelerated ageing conditions in an atmosphere of 75% relative humidity. Multiple metastable polymorphs of recrystallized FEL could be identified by selected area electron diffraction (SAED), predominately form II and the more stable form I. Conical DF imaging was also successful in spatially resolving and sizing crystals. This work highlights the potential for TEM-based techniques to improve the limit of detection of crystallinity in ASDs, while also providing insights into transformation pathways by identifying the location, size, and form of any crystallization that might occur on storage. This opens up the possibility of providing an enhanced understanding of a drug product's stability and performance.

Melt Electrospinning of Polymers: Blends, Nanocomposites, Additives and Applications

Melt electrospinning has been developed in the last decade as an eco-friendly and solvent-free process to fill the gap between the advantages of solution electrospinning and the need of a cost-effective technique for industrial applications. Although the benefits of using melt electrospinning compared to solution electrospinning are impressive, there are still challenges that should be solved. These mainly concern to the improvement of polymer melt processability with reduction of polymer degradation and enhancement of fiber stability; and the achievement of a good control over the fiber size and especially for the production of large scale ultrafine fibers. This review is focused in the last research works discussing the different melt processing techniques, the most significant melt processing parameters, the incorporation of different additives (e.g., viscosity and conductivity modifiers), the development of polymer blends and nanocomposites, the new potential applications and the use of drug-loaded melt electrospun scaffolds for biomedical applications.

Preparation of solid dispersion systems for enhanced dissolution of poorly water soluble diacerein: In-vitro evaluation, optimization and physiologically based pharmacokinetic modeling

Diacerein (DCN), a BCS II compound, suffers from poor aqueous solubility and limited bioavailability. Solid dispersion systems (SD) of DCN were prepared by solvent evaporation, using hydrophilic polymers. In-vitro dissolution studies were performed and dissolution parameters were evaluated. I-Optimal factorial design was employed to study the effect of formulation variables (drug:polymer ratio and polymer type) on the measured responses including; drug content (DC) (%), dissolution efficiency at 15 min (DE _{(15 min)}%) and 60 min (DE _{(60 min)}%) and mean dissolution time (MDT) (min). The optimized SD was selected, prepared and evaluated, allowing 10.83 and 3.42 fold increase in DE _{(15 min)}%, DE _{(60 min)}%, respectively and 6.07 decrease in MDT, compared to plain drug. DSC, XRD analysis and SEM micrographs confirmed complete amorphization of DCN within the optimized SD. Physiologically based pharmacokinetic (PBPK) modeling was employed to predict PK parameters of DCN in middle aged healthy adults and geriatrics. Simcyp^® software established in-vivo plasma concentration time curves of the optimized SD, compared to plain DCN. Relative bioavailability of the optimized SD compared to plain drug was 229.52% and 262.02% in healthy adults and geriatrics, respectively. Our study reports the utility of PBPK modeling for formulation development of BCS II APIs, via predicting their oral bio-performance.

Surface functionalized mesoporous silica nanoparticles for intravitreal application of tacrolimus

Tacrolimus (TAC), a potent immunosuppressive macrolide, has been investigated for ocular diseases due to promising results in the treatment of anterior and posterior segments eye diseases. Mesoporous and functionalized silica nanoparticles show potential as TAC delivery platforms owing to their interesting characteristic as large surface area, uniform pore size distribution, high pore volume, and excellent biocompatibility. The purpose of this study was to incorporate TAC in functionalized silica nanoparticles with 3-aminopropyltriethoxysilane (MSNAPTES) and investigate the safety and biocompatibility of the systems. The MSNAPTES and MSNAPTES TAC nanoparticles were characterized. The in vitro cytotoxicity of MSNAPTES and MSNAPTES load with TAC (MSNAPTES-TAC) in retinal pigment epithelial cells (ARPE-19) was determined, chorioallantoic membrane (CAM) assay model was used to investigate the in vivo biocompatibility, and safety of intravitreal injection was evaluated using clinical examination (assessment of intraocular pressure and indirect fundus ophthalmoscopy), electroretinographic (ERG) and histologic studies in rats' eyes. The elemental analysis (CHN), thermogravimetric (TGA), photon correlation spectroscopy and Fourier transform infrared (FTIR) analysis confirmed the presence of functionalized agent and TAC in the MSNAPTES nanoparticles. TAC loading was estimated at 7% for the MSNAPTES TAC nanoparticles. MSNAPTES and MSNAPTES TAC did not present in vitro cytotoxicity. The drug delivery systems showed good biocompatibility on CAM. No retinal abnormalities, vitreous hemorrhage, neovascularization, retinal detachment, and optic nerve atrophy were observed during the in vivo study. Follow-up ERGs showed no changes in the function of the retina cells after 15 days of intravitreal injection, and histopathologic observations support these findings. In conclusion, MSNAPTES TAC was successfully synthesized, and physicochemical analyses confirmed the presence of TAC in the nanoparticles. In vitro and in vivo studies indicated that MSNAPTES TAC was safe to intravitreal administration. Taking into account the enormous potential of MSNAPTES to carry TAC, this platform could be a promising strategy for TAC ocular drug delivery in the treatment of eye diseases.

Pharmacokinetics and bioavailability of solid dispersion formulation of tilmicosin in pigs

Tilmicosin (TMS) is a semisynthetic macrolide antibiotic restricted to veterinary use but is only partially soluble in aqueous solutions, which limits its administration in treatments. We developed a strategy to enhance the supersaturated solubility of TMS using amorphous solid dispersion (SD). The dissolution profile shown that the dissolution rate of TMS-SD was obviously faster than TMS. The pharmacokinetics of tilmicosin (TMS) and tilmicosin solid dispersion (TMS-SD) in pigs after oral administration at a single dose of 50 mg/kg b.w were investigated. The t_max of TMS-SD (2.50 hr) was 1.80 times faster than TMS (4.50 hr) (p < .05). There were no significant differences in the other PK parameters (C_max , t_1/2β , V/F, CL/F, MRT, and AUC_0-inf ) (p > .05). The mean relative bioavailability of TMS-SD compared with TMS was 140.39%, according to the AUC_0-inf values. These results demonstrated that the solid dispersion technique enhanced the bioavailability of TMS and the new formulation administered to animals via drinking water may be used as a therapeutic alternative for clinical treatments.

Effect of excipients on oral absorption process according to the different gastrointestinal segments

INTRODUCTION

Excipients are necessary to develop oral dosage forms of any Active Pharmaceutical Ingredient (API). Traditionally, excipients have been considered inactive and inert substances, but, over the years, numerous studies have contradicted this belief. This review focuses on the effect of excipients on the physiological variables affecting oral absorption along the different segments of the gastrointestinal tract. The effect of excipients on the segmental absorption variables are illustrated with examples to help understand the complexity of predicting their in vivo effects.

AREAS COVERED

The effects of excipients on disintegration, solubility and dissolution, transit time, and absorption are analyzed in the context of the different gastrointestinal segments and the physiological factors affecting release and membrane permeation. The experimental techniques used to study excipient effects and their human predictive ability are reviewed.

EXPERT OPINION

The observed effects of excipient in oral absorption process have been characterized in the past, mainly in vitro (i.e. in dissolution studies, in vitro cell culture methods or in situ animal studies). Unfortunately, a clear link with their effects in vivo, i.e. their impact on Cmax or AUC, which need a mechanistic approach is still missing. The information compiled in this review leads to the conclusion that the effect of excipients in API oral absorption and bioavailability is undeniable and shows the need of implementing standardized and reproducible preclinical tools coupled with mechanistic and predictive physiological-based models to improve the current empirical retrospective approach.

Novel Hemocompatible Imine Compounds as Alternatives for Antimicrobial Therapy in Pharmaceutical Application

The aim of this study was to synthesize, characterize, and evaluate neoteric imine compounds for antimicrobial activity and hemocompatibility. Four compounds were synthesized using 3-thiophene carboxaldehyde, ethanol, amine, and acetic acid. The compounds were characterized using nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD). A solubility study was conducted with various solvents and surfactants at 40 °C. An in vitro antimicrobial assay was performed against bacterial and fungal strains to determine the zone of inhibition and minimum inhibitory concentrations. Finally, an in vitro hemolysis study was conducted using rat erythrocytes. The structure of the compounds was confirmed by NMR, FTIR corroborated their functional group attributes, DSC determined their enthalpies of fusion and fusion temperatures, and PXRD confirmed their crystalline nature. These compounds were water-insoluble but soluble in chloroform, with a maximum solubility of ~80 mg/mL. The antimicrobial assay suggested that two of the products exerted potent activities against C. albicans and several bacterial strains. Finally, hemolysis analysis excluded the possibility of hemolysis at the assessed concentrations. In conclusion, two of the novel imine compounds showed promise as antimicrobial agents to control local and systemic microbial infections in a suitable dosage form.

Formulation of amorphous ternary solid dispersions of dapagliflozin using PEG 6000 and Poloxamer 188: solid-state characterization, ex vivo study, and molecular simulation assessment

The present study was designed to prepare dapagliflozin (DFG) loaded ternary solid dispersions (SDs) using the carrier blend polyethylene glycol 6000 (PEG 6000) and poloxamer 188 (PLX 188). The prepared DFG-SDs were evaluated for solubility study, physicochemical characterization and molecular simulation study. The prepared DFG-SDs showed significant higher solubility and dissolution vis-a-vis pure DFG and DFG physical mixture. The composition DFG:PEG:PLX (1:2.25:0.75 mM) showed the highest solubility (0.476 ± 0.016 mg/mL). The physicochemical characterization confirms the polymorphic transition of DFG from crystalline state to stable amorphous form. The prepared DFG-SDs showed a significantly higher dissolution (64.78 ± 2.34% to 78.41 ± 2.39%) than pure DFG (15.70 ± 3.54%). DFG-SD2 showed a significantly enhanced drug permeation (p<.05) (58.76 ± 4.65 µg/cm) as compared to pure DFG (14.97 ± 3.32 µg/cm). The molecular docking study result revealed a good hydrophobic interaction of DFG with the used carrier due to the lowest energy pose. The interaction occurs between the methylene bridges and the central hydrophobic chain of polyoxypropylene of the polymer. Therefore, DFG-SDs prepared by microwave irradiation method using hydrophilic carrier blend might be a promising strategy for improving the solubility and in vitro dissolution performance.

Mitigation of Tacrolimus-Associated Nephrotoxicity by PLGA Nanoparticulate Delivery Following Multiple Dosing to Mice while Maintaining its Immunosuppressive Activity

The aim of this study was to assess the ability of PLGA nanoparticles (NPs) to reduce the tacrolimus (TAC)-associated nephrotoxicity following multiple dose administration. The mean diameter of prepared NPs was in the range of 227 to 263 nm with an 8.32% drug loading (w/w). Moreover, in vitro release profile of TAC-loaded NPs showed a sustained release of the drug with only less than 30% release within 12 days. Flow cytometry as well as fluorescence microscopy results confirmed the uptake of FITC-labelled PLGA NPs by dendritic cells. The ex vivo study showed that TAC-loaded NPs caused a significant suppression of the proliferation of CD4⁺ and CD8⁺ cells, which was comparable to the control formulation (Prograf). In vivo immunosuppressive activity as well as the kidney function were assessed following drug administration to mice. The animals received TAC subcutaneously at a daily dose of 1 mg/kg for 30 days delivered as the control formulation (Prograf) or TAC-loaded NPs. The results revealed significantly lower drug-associated toxicity with an activity comparable to Prograf for TAC-loaded PLGA NPs. These findings show a potential for PLGA NPs in reducing the nephrotoxicity of TAC while preserving the immunosuppressive activity.

Pharmaceutical Characterization and In Vivo Evaluation of Orlistat Formulations Prepared by the Supercritical Melt-Adsorption Method Using Carbon Dioxide: Effects of Mesoporous Silica Type

Orlistat, an anti-obesity drug, has two critical issues—the first is its low efficacy due to low water solubility and the second is side effects such as oily spotting due to its lipase inhibition. The present study was designed to propose a solution using a formulation with mesoporous silica to simultaneously overcome two issues. Orlistat was loaded onto mesoporous silica by the supercritical melt-adsorption (SCMA) method, using carbon dioxide (CO₂). Various types of mesoporous silica were used as adsorbents, and the effects of the pore volume, diameter and particle size of mesoporous silica on the pharmaceutical characteristics were evaluated by various solid-state characterization methods and in vitro and in vivo studies in relation to pharmacological efficacy and the improvement of side effects. The results showed that the pore volume and diameter determine loadable drug amount inside pores and crystallinity. The dissolution was significantly influenced by crystallinity, pore diameter and particle size, and the inhibition of lipase activity was in proportion to the dissolution rate. In vivo studies revealed that the serum triglyceride (TG) concentration was significantly decreased in the group administered amorphous orlistat-loaded Neuisilin^®UFL2 with the highest in vitro dissolution rate and lipase activity inhibition in comparison to the commercial product. Furthermore, oily spotting tests in rats revealed that undigested oil was adsorbed onto mesoporous silica after orlistat was released in the gastro-intestinal tract, and it correlated with in vitro result that oil adsorption capacity was dependent on the surface area of empty mesoporous silica. Therefore, it was concluded that mesoporous silica type plays a major role in determining the pharmaceutical characteristics of orlistat formulation prepared using SCMA with CO₂ for improving the low solubility and overcoming the side effects.

Spray-Dried Amorphous Solid Dispersions of Griseofulvin in HPC/Soluplus/SDS: Elucidating the Multifaceted Impact of SDS as a Minor Component

This study aimed to elucidate the impact of a common anionic surfactant, sodium dodecyl sulfate (SDS), along with hydroxypropyl cellulose (HPC) and Soluplus (Sol) on the release of griseofulvin (GF), a poorly soluble drug, from amorphous solid dispersions (ASDs). Solutions of 2.5% GF and 2.5%–12.5% HPC/Sol with 0.125% SDS/without SDS were prepared in acetone–water and spray-dried. The solid-state characterization of the ASDs suggests that GF–Sol had better miscibility and stronger interactions than GF–HPC and formed XRPD-amorphous GF, whereas HPC-based ASDs, especially the ones with a lower HPC loading, had crystalline GF. The dissolution tests show that without SDS, ASDs provided limited GF supersaturation (max. 250%) due to poor wettability of Sol-based ASDs and extensive GF recrystallization in HPC-based ASDs (max. 50%). Sol-based ASDs with SDS exhibited a dramatic increase in supersaturation (max. 570%), especially at a higher Sol loading, whereas HPC-based ASDs with SDS did not. SDS did not interfere with Sol’s ability to inhibit GF recrystallization, as confirmed by the precipitation from the supersaturated state and PLM imaging. The favorable use of SDS in a ternary ASD was attributed to both the wettability enhancement and its inability to promote GF recrystallization when used as a minor component along with Sol.

Improving solubility and oral bioavailability of a novel antimalarial prodrug: comparing spray-dried dispersions with self-emulsifying drug delivery systems

To improve the solubility and oral bioavailability of a novel antimalarial agent ELQ-331(a prodrug of ELQ-300), spray-dried dispersions (SDD) and a self-emulsifying drug delivery system (SEDDS) were developed. SDD were prepared with polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus^®) polymer carrier and Aeroperl^® 300 Pharma and characterized by differential scanning calorimetry, powder X-ray diffraction. For SEDDS, solubility in oils, surfactants, and co-surfactants was determined and ternary phase diagram was constructed to show self-emulsifying area. SEDDS were characterized for spontaneous emulsification and droplet size distribution. The amorphous ELQ-331 SDD improved the solubility to 10× in fast-state simulated intestinal fluid and addition of sodium lauryl sulphate externally to SDDs further improved the solubility to ∼28.5× versus non-formulated drug. SEDDS had good self-emulsifying characteristics with small emulsion droplet sizes and narrow particle distribution. Oral pharmacokinetic studies for SDD and SEDDS formulations were performed in rats. The ELQ-331 rapidly converted to ELQ-300 soon after oral administration in rats. Exposure levels of ELQ-300 were about 1.4-fold higher (based on AUC) in SEDDS than SDD formulations. Poorly soluble drugs like ELQ-331 can be formulated using SDD or SEDDS to improve solubility and oral bioavailability.

Design of novel tacrolimus formulations with chemically synthesized oils for oral lymphatic delivery

High consumption of oil formulations has been reported to reduce the blood exposure of drugs like tacrolimus. Consumption of oil formulations has also been shown to inhibit T-cell production of interleukin-2 (IL-2) compared to solid dispersion formulations (SDFs). However, a large amount of oil causes gastrointestinal side effects such as diarrhea and low compliance. Here, we investigated the feasibility of reducing the amount of oil and substitution of chemically synthetized oils for natural oils in these formulations. Reducing the amount of sunflower oil increased blood tacrolimus exposure despite sufficient suppression of IL-2 production. While medium-chain triglyceride (MCT) increased tacrolimus blood exposure, addition of 10% glyceryl monostearate (GMS) to MCT significantly decreased drug blood exposure without requiring a large amount of oil (p < .05). Effects of the contents of GMS in the MCT/GMS formulations, and fatty acid composition in GMS on drug blood exposure were also investigated. The results indicated that both the amount and type of oil were important for maintaining a good balance between a reduction in blood exposure and sufficient IL-2 suppression. The ratio of drug concentration in lymphocytes to that in whole blood after dosing with an oil formulation was significantly higher than that after administration of the SDF (p < .01). These results indicate the feasibility of developing oral oil tacrolimus formulations to reduce systemic side effects and maintain high efficacy for practical use in patients.

Amorphous solid dispersion formation via solvent granulation - A case study with ritonavir and lopinavir

Herein, we evaluate the potential of using a simple solvent granulation process to prepare a binary drug amorphous solid dispersion (ASD) containing two anti-HIV drugs, ritonavir and lopinavir. The drugs were granulated onto a mixture of lactose and microcrystalline cellulose, followed by drying to remove the solvent. The resultant granules were characterized and each drug was found to be X-ray amorphous. No crystallization was observed following storage for 1 month under accelerated stability conditions (40 °C and 75% relative humidity). The dissolution behavior of the compacted granules was compared with the marketed formulation. The dissolution rate of ritonavir was found to be significantly retarded relative to the commercial product when the two drugs were co-granulated. However, comparable release could be achieved when each drug was individually granulated, followed by combination and compaction. The solvent granulation approach may be a viable method to make ASDs of low dose drugs with low crystallization tendencies.

Evaluation of the bioavailability of hydrocortisone when prepared as solid dispersion

This study was conducted to formulate, characterize, and investigate the bioavailability of hydrocortisone (HCT) when prepared as solid dispersions. HCT was mixed in an organic solvent with polyethylene glycol 4000 (PEG 4000) and Kolliphor® P 407. Spray drying technique was employed to form a solid dispersion formulation at a specific ratio. Physical and chemical characterization of the formed particles were achieved using differential scanning calorimetry, scanning electron microscopy, Fourier transform infrared spectroscopy, and powder X-ray diffractometry. Furthermore, comparative in vitro and in vivo studies were conducted between the formulated particles against neat HCT. The formulated solid dispersion showed elongated particles with leaf-like structure. Formation of new chemical bonds in the formed particle was suggested due to the change in the vibrational wave numbers and the significant improvement in the bioavailability of the dispersed particles proved the importance of this technique.

Sustained Release Technology and Its Application in Environmental Remediation: A Review

Sustained release technology is a class of technology characterized by slowly-releasing specific active substances into a target medium to keep a certain concentration in the system within valid time. As a new of type technology, it has been extensively applied to medicine, chemical engineering, agriculture, environmental protection, etc. The principles and classification of sustained release technologies, as well as typical preparation methods of sustained release agents, were summarized in this paper; by introducing applied research progress of sustained release technologies into environmental fields like rainwater purification, sewage/drinking water treatment, and soil and atmosphere remediation, application features of these sustained release technologies were evaluated, and their application prospect in environmental remediation, especially in water treatment, was predicted.

Amorphous solid dispersions of weak bases with pH-dependent soluble polymers to overcome limited bioavailability due to gastric pH variability - An in-vitro approach

Several drugs are pH-dependent soluble weak bases with a poor solubility in the intestinal pH range. Additionally a variable gastric pH, which is a common issue in the population, potentially reduces the in-vivo performance due to reduced solubility at elevated pH. Aiming to avoid the influence of variable gastric pH on the dissolution performance, enteric polymers - hydroxypropylmethylcellulose acetate succinate (HPMCAS), hydroxypropylmethylcellulose phthalate (HP-55, HP-50) and methacrylic acid ethylacrylate copolymer (Eudragit L100-55) together with nevirapine as model drug were used for the preparation of solid dispersions by hot-melt extrusion. We were able to generate solid dispersions without crystalline residuals. The resulting solid dispersions were further tested for stability and dissolution performance applying two different pH-shift experiments (non-sink conditions), to simulate standard and altered gastric conditions. Solid dispersions made of enteric polymers were independent to gastric pH variability and exhibited superior dissolution performances compared to their respective physical mixtures and neat nevirapine.