Alginate coated chitosan core shell nanoparticles for oral delivery of enoxaparin: in vitro and in vivo assessment

The impact of copper nanoparticles surfactant on the structural and biological properties of chitosan/sodium alginate wound dressings

Multifunctional wound dressings based on hydrogels are an efficacious and practicable strategy in therapeutic processes and accelerated chronic wound healing. Here, copper (Cu) nanoparticles were added to chitosan/sodium alginate (CS/SA) hydrogels to improve the antibacterial properties of the prepared wound dressings. Due to the super-hydrophobicity of Cu nanoparticles, polyethylene glycol (PEG) was used as a surfactant, and then added to the CS/SA-based hydrogels. The CS/SA/Cu hydrogels were synthesized with 0, 2, 3.5, and 5 wt% Cu nanoparticles. The structural and morphological properties in presence of PEG were evaluated using Fourier-transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), and field emission scanning electron microscopy (FESEM). The biodegradation and swelling properties of the hydrogels were investigated in phosphate buffer saline (PBS) at 37 °C for up to 30 days. Cell viability and adhesion, as well as antibacterial behavior, were investigated via MTT assay, FESEM, and disk diffusion method, respectively. The obtained results showed that PEG provided new intra- and intermolecular bonds that affected significantly the hydrogels' degradation and swelling ratio, which increased up to ~1200 %. Cell viability reached ~110 % and all samples showed remarkable antibacterial behavior when CS/SA/Cu containing 2 wt% was introduced. This study provided new insights regarding the use of PEG as a surfactant for Cu nanoparticles in CS/SA hydrogel wound dressing, ultimately affecting the chemical bonding and various properties of the prepared hydrogels.

Investigation of delivery mechanism of curcumin loaded in a core of zein with a double-layer shell of chitosan and alginate

The pursuit of efficient drug delivery systems has led to innovative approaches such as matrix and core-shell structures. This study explores these systems with a focus on enhancing the delivery and stability of curcumin, a bioactive compound with therapeutic potential. Matrix systems using zein protein were fabricated through coaxial airflow extrusion with a vibration generator, while core-shell systems were produced using concentric nozzles. Double-layer reservoir systems were also formed by coating chitosan-shelled structures with an alginate solution. Encapsulation of curcumin within each system was confirmed through FTIR and optical microscope analysis, followed by efficiency evaluation, which was measured approximately 86.5 ± 0.7 % for the matrix systems and 90 ± 0.8 % for the core-shell systems. Moreover, the particle sizes of matrix systems were measured in the range of 2000-2100 mμ and the particle sizes of single-layer and double-layer reservoir systems were in the ranges of 1600-1700 mμ and 1500-1700 mμ, respectively. The study investigated the stability of curcumin in these systems under various environmental conditions, including exposure to light, heat, pH variations, ions, and storage. Results demonstrated that the presence of multiple layers significantly enhanced the drug's stability. Afterwards, swelling and drug release profiles were assessed in simulated gastric, intestinal, and colon fluids. The swelling of the matrix, single-layer and double-layer reservoir systems after 29 h were 127.4 %, 146.9 % and 144 %, respectively. The matrix system showed 68.7 % drug release after 29 h, whereas single-layer chitosan-shelled and double-layer chitosan/alginate-shelled reservoir systems released 51.8 % and 45.6 % of the drug, respectively. The release mechanism was explored using zero-order, Korsmeyer-Peppas, and Kopcha kinetic models. Comparative analysis of the experimental results and model fittings indicated a deviation from Fickian diffusion, with erosion becoming more pronounced with each additional layer. In conclusion, the system with a zein core and double-layer chitosan/alginate shell displayed effective drug release regulation and enhanced stability of curcumin, making it a promising candidate for efficient drug delivery.

Formulation development, characterization, and evaluation of bedaquiline fumarate - Soluplus® - solid dispersion

Bedaquiline fumarate (BQF) is classified as a BCS class II drug and has poor water solubility and dissolution rate, which ultimately compromises bioavailability. The objective of this study is to improve the biopharmaceutical properties of BQF through a solid dispersion system by using Soluplus®. Two solid dispersion systems were prepared i.e. binary solid dispersion (BSD) and ternary solid dispersion (TSD) where 14.31-fold and 20.43-fold increase in solubility of BQF was observed with BSD and TSD in comparison to BQF. In our previous research work, we explored the BSD and TSD of BQF with a crystalline polymer, poloxamer 188, which showed an increment in the solubility of BQF. In the current research, amorphous Soluplus® polymer was selected to formulate BSD and TSD with BQF and showed higher solubility than poloxamer 188. The various solid and liquid state characterization results confirmed the presence of an amorphous form of BQF inside solid dispersion. The Fourier transform infrared spectroscopy showed no chemical interactions between BQF and polymer. The cellular uptake results demonstrated higher uptake in Caco-2 cell lines. Pharmacokinetic studies showed enhanced solubility and bioavailability of TSDs. Hence, the present research shows a promising formulation strategy for enhancing the biopharmaceutical performance of BQF by increasing its solubility.

Stability and biological activity enhancement of fucoxanthin through encapsulation in alginate/chitosan nanoparticles

A response surface methodology based on the Box-Behnken design was employed to develop fucoxanthin (FX) delivery nanocarrier from alginate (ALG) and chitosan (CS). The FX-loaded ALG/CS nanoparticles (FX-ALG/CS-NPs) were fabricated using oil-in-water emulsification and ionic gelation. The optimal formulation consisted of an ALG:CS mass ratio of 0.015:1, 0.71 % w/v Tween™ 80, and 5 mg/mL FX concentrations. The resulting FX-ALG/CS-NPs had a size of 227 ± 23 nm, a zeta potential of 35.3 ± 1.7 mV, and an encapsulation efficiency of 81.2 ± 2.8 %. These nanoparticles exhibited enhanced stability under simulated environmental conditions and controlled FX release in simulated gastrointestinal fluids. Furthermore, FX-ALG/CS-NPs showed increased in vitro oral bioaccessibility, gastrointestinal stability, antioxidant activity, anti-inflammatory effect, and cytotoxicity against various cancer cells. The findings suggest that ALG/CS-NPs are effective nanocarriers for the delivery of FX in nutraceuticals, functional foods, and pharmaceuticals.

Polyelectrolyte complexes based on a novel and sustainable hemicellulose-rich lignosulphonate for drug delivery applications

Polyelectrolyte complexes (PECs) are polymeric structures formed by the self-assembly of oppositely charged polymers. Novel biomaterials based on PECs are currently under investigation as drug delivery systems, among other applications. This strategy leverages the ability of PECs to entrap drugs under mild conditions and control their release. In this study, we combined a novel and sustainably produced hemicellulose-rich lignosulphonate polymer (EH, negatively charged) with polyethyleneimine (PEI) or chitosan (CH, positively charged) and agar for the development of drug-releasing PECs. A preliminary screening demonstrated the effect of several parameters (polyelectrolyte ratio, temperature, and type of polycation) on PECs formation. From this, selected formulations were further characterized in terms of thermal properties, surface morphology at the microscale, stability, and ability to load and release methylene blue (MB) as a model drug. EH/PEI complexes had a more pronounced gel-like behaviour compared to the EH/CH complexes. Differential scanning calorimetry (DSC) results supported the establishment of polymeric interactions during complexation. Overall, PECs' stability was positively affected by low pH, ratios close to 1:1, and the addition of agar. PECs with higher EH content showed a higher MB loading, likely promoted by stronger electrostatic interactions. The EH/CH formulation enriched with agar showed the best sustained release profile of MB during the first 30 h in a pH-dependent environment simulating the gastrointestinal tract. Overall, we defined the conditions to formulate novel PECs based on a sustainable hemicellulose-rich lignosulphonate for potential applications in drug delivery, which promotes the valuable synergy between sustainability and the biomedical field.

Co-Delivery of Naringin and Ciprofloxacin by Oleic Acid Lipid Core Encapsulated in Carboxymethyl Chitosan/Alginate Nanoparticle Composite for Enhanced Antimicrobial Activity

A novel combination of antibiotic, ciprofloxacin (CIP) with herbal counterpart naringin (NAR) was encapsulated by an oleic acid lipid core and carboxymethyl chitosan (CM-CS)/Alginate (AG) nanoparticle composite (CIP + NAR-CM-CS/AG-NPs) for improved antimicrobial efficacy of antibiotic. Herein, this study explored the design and preparation of a composite system that enables to deliver both CIP and NAR from the oleic acid lipid core of CM-CS/AG nanoparticles using a nonsolvent ionic gelation technique. The nanoparticles (NPs) were fabricated with improved long-acting antimicrobial activity against E. coli and S. aureus. The optimized composition was investigated for physicochemical properties particle size, particle distribution, and ζ-potential. A diverse array of analytical tools was employed to characterize the optimized formulation including DSC, XRD, Malvern Zetasizer for particle size, ζ-potential, TEM, and SEM. Further, the preparation was investigated for % drug release, flux determination, antioxidant, and antimicrobial activity. The formulation stability was tested for 90 days and also evaluated formulation stability in fetal bovine serum to inspect the modification in physicochemical characteristics. NPs size was determined at 85 nm, PDI, and ζ-potential was recorded at 0.318, and 0.7 ± 0.4 mV. The % CIP and NAR entrapment efficiency and % loading were incurred as 91 ± 1.9, and 89.5 ± 1.2; 11.5 ± 0.6, and 10.8 ± 0.5%, respectively. The drug release erupted in the beginning phase followed by sustained and prolonged release for 48 h. The analytical experiments by DSC ensured the noninteracting and safe use of excipients in combination. X-ray studies demonstrated the amorphous state of the drug in the formulation. The insignificant alteration of formulation characteristics in FBS suggested stable and robust preparation. Storage stability of the developed formulation ensured consistent and uniform stability for three months. The DPPH assays demonstrated that NAR had good antioxidant capacity and supported improving antimicrobial activity of CIP. The hemolytic test suggested the developed formulation was compatible and caused insignificant RBC destruction. The in-house built formulation CIP + NAR-CM-CS/AG-NPs significantly improved the antimicrobial activity compared to CIP alone, offering a novel choice in antimicrobial application.

In vitro 5-fluorouracil release properties investigation from pH sensitive sodium alginate coated and uncoated methyl cellulose/chitosan microspheres

5-Fluorouracil (5-FU) has been in clinical practice for decades one of the oldest chemotherapy agents. However, intravenous administration of 5-FU requires the development of an oral controlled delivery system for improved patient compliances. For this purpose, 5-FU loaded and sodium alginate (NaAlg) coated and uncoated methyl cellulose (MC)/chitosan (CS) microspheres were prepared by emulsion crosslinking method using a mixture of water and oil. Firstly, MC/CS microspheres were prepared and then coated with NaAlg. The prepared microspheres were characterized by optical microscopy, Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Microspheres were also characterized by equilibrium swelling values and drug release profiles. The in vitro drug release studies were carried out with three pH values 1.2, 6.8, and 7.4, respectively, each for 2 h. It was determined that coating the microspheres with NaAlg provides more controlled drug release, especially at pH 1.2. The effects of the preparation conditions, such as coating time, MC/CS ratio, NaAlg concentration, and crosslinker concentration on the 5-FU release were investigated.

The Current and Promising Oral Delivery Methods for Protein- and Peptide-Based Drugs

Drugs based on peptides and proteins (PPs) have been widely used in medicine, beginning with insulin therapy in patients with diabetes mellitus over a century ago. Although the oral route of drug administration is the preferred one by the vast majority of patients and improves compliance, medications of this kind due to their specific chemical structure are typically delivered parenterally, which ensures optimal bioavailability. In order to overcome issues connected with oral absorption of PPs such as their instability depending on digestive enzymes and pH changes in the gastrointestinal (GI) system on the one hand, but also their limited permeability across physiological barriers (mucus and epithelium) on the other hand, scientists have been strenuously searching for novel delivery methods enabling peptide and protein drugs (PPDs) to be administered enterally. These include utilization of different nanoparticles, transport channels, substances enhancing permeation, chemical modifications, hydrogels, microneedles, microemulsion, proteolytic enzyme inhibitors, and cell-penetrating peptides, all of which are extensively discussed in this review. Furthermore, this article highlights oral PP therapeutics both previously used in therapy and currently available on the medical market.

Antimicrobial and antitumor activities of an alginate-based membrane loaded with bismuth nanoparticles and cetylpyridinium chloride

OBJECTIVE

To evaluate the antitumor and antimicrobial properties of an alginate-based membrane (ABM) loaded with bismuth lipophilic nanoparticles (BisBAL NPs) and cetylpyridinium chloride (CPC) on clinically isolated bacteria and a pancreatic cancer cell line.

MATERIAL AND METHODS

The BisBAL NP-CPC ABM was characterized using optical and scanning electron microscopy (SEM). The antimicrobial potential was measured using the disk-diffusion assay, and antibiofilm activity was determined through the live/dead assay and fluorescence microscopy. The antitumor activity was analyzed on the pancreatic cell line (Panc 03.27) using the MTT assay and live/dead assay with fluorescence microscopy.

RESULTS

After a 24-h exposure (37°C, aerobic conditions), 5 µM BisBAL NP reduced the growth of K. pneumoniae by 77.9%, while 2.5 µM BisBAL NP inhibited the growth of Salmonella, E. faecalis and E. faecium by 82.9%, 82.6%, and 78%, respectively (p < 0.0001). The BisBAL NPs-CPC ABM (at a ratio of 10:1; 500 and 50 µM, respectively) inhibited the growth of all isolated bacteria, producing inhibition halos of 9.5, 11.2, 7, and 10.3 mm for K. pneumoniae, Salmonella, E. faecalis, and E. faecium, respectively, in contrast to the 6.5, 9.5, 8.5, and 9.8 mm obtained with 100 µM ceftriaxone (p < 0.0001). The BisBAL NPs-CPC ABM also reduced bacterial biofilms, with 81.4%, 74.5%, 97.1%, and 79.5% inhibition for K. pneumoniae, E. faecium, E. faecalis, and Salmonella, respectively. Furthermore, the BisBAL NPs-CPC ABM decreased Panc 03.27 cell growth by 76%, compared to 18% for drug-free ABM. GEM-ABM reduced tumoral growth by 73%. The live/dead assay confirmed that BisBAL NPs-CPC-ABM and GEM-ABM were cytotoxic for the turmoral Panc 03.27 cells.

CONCLUSION

An alginate-based membrane loaded with BisBAL NP and CPC exhibits dual antimicrobial and antitumoral efficacy. Therefore, it could be applied in cancer treatment and to diminish the occurrence of surgical site infections.

Dual-Targeted Nanoparticle-in-Microparticle System for Ulcerative Colitis Therapy

Conventional oral therapy for ulcerative colitis (UC) is associated with premature release or degradation of drugs in the harsh gastrointestinal environment, resulting in reduced therapeutic effectiveness. Consequently, the present study aims to develop a dual-targeted delivery system with a nanoparticle-in-microparticle (nano-in-micro) structure. The prepared Asiatic Acid-loaded delivery system (AA/CDM-BT-ALG) has pH-sensitive properties. Cellular uptake evaluation confirms that nanoparticles exhibit targeted absorption by macrophages and Caco-2 cells through mannose (Man) receptor and biotin-mediated endocytosis, respectively. Therefore, this mechanism effectively enhances intracellular drug concentration. Additionally, the biodistribution study conducted on the gastrointestinal tract of mice indicates that the colon of the microspheres group shows higher fluorescence intensity with longer duration than the other groups. This finding indicates that the microspheres exhibit selective accumulation in areas of colon inflammation. In vivo experiments in colitis mice showed that AA/CDM-BT-ALG significantly alleviates the histopathological characteristics of the colon, reduced neutrophil, and macrophage infiltration, and decreases pro-inflammatory cytokine expression. Furthermore, the effect of AA/CDM-BT-ALG on colitis is validated to be closely related to the TLR4/MyD88/NF-κB signaling pathway. The present findings suggest that the development of a dual-targeted delivery system is accomplished effectively, with the potential to serve as a drug-controlled release system for treating UC.

Preparation of chitosan nanoparticles for simultaneous drug delivery of dacarbazine and enoxaparin in melanoma

The aim of this study was to investigate the anti-melanoma and anti-angiogenic effects of enoxaparin surface-coated dacarbazine-loaded chitosan nanoparticles (Enox-Dac-Chi NPs). The prepared Enox-Dac-Chi NPs had a particle size of 367.95 ± 1.84 nm, zeta potential of -7.12 ± 0.25 mV, efficiency of drug loading (DL%) of 73.90 ± 3.84 %, and attached enoxaparin percentage of 98.53 ± 0.96 %. Both drugs had extended-release profiles and approximately 96 % of enoxaparin and 67 % dacarbazine were released within 8 h. The Enox-Dac-Chi NPs with IC₅₀ of 59.60 ± 1.25 μg/ml were the most cytotoxic against melanoma cancer cells compared with chitosan nanoparticles containing only dacarbazine (Dac-Chi NPs) and free dacarbazine. There was no significant difference between the cellular uptake of Chi NPs and enoxaparin coated Chi NPs (Enox-Chi NPs) in B16F10 cells. Enox-Chi NPs with an average anti-angiogenic score of 1.75 ± 0.125 had more anti-angiogenic effect than enoxaparin. The results showed that simultaneous delivery of dacarbazine and enoxaparin by chitosan nanoparticles can enhance the anti-melanoma effect of dacarbazine. Additionally, enoxaparin can prevent the melanoma metastasis by its anti-angiogenic activity. Thus, the designed nanoparticles can be introduced as effective drug delivery vehicles for the treatment and prevention of metastatic melanoma.

Research progress of colon-targeted oral hydrogel system based on natural polysaccharides

The quality of life is significantly impacted by colon-related diseases. There have been a lot of interest in the oral colon-specific drug delivery system (OCDDS) as a potential carrier to decrease systemic side effects and protect drugs from degradation in the upper gastrointestinal tract (GIT). Hydrogels are effective oral colon-targeted drug delivery carriers due to their high biodegradability, substantial drug loading, and great biocompatibility. Natural polysaccharides give the hydrogel system unique structure and function to effectively respond to the complex environment of the GIT and deliver drugs to the colon. In this paper, the physiological factors of colonic drug delivery and the pathological characteristics of common colonic diseases are summarized, and the latest advances in the design, preparation and characterization of natural polysaccharide hydrogels are reviewed, which are expected to provide new references for colon-targeted oral hydrogel systems using natural polysaccharides as raw materials.

Synthesis and characterization of Hyaluronic Acid (HA) modified polymeric composite for effective treatment of wound healing by transdermal drug delivery system (TDDS)

The present study aimed to fabricate a novel polymeric spongy composite to enhance skin regeneration composed of Nystatin (antifungal agent) and Silver Nanoparticles (AgNps). Different formulations (F1-F8) were developed & characterized by using various analytical techniques. AgNps synthesized by chemical reduction method showed spherical morphology 2 µm in size showed by SEM and XRD. A fine porous structure of gel embedded with AgNps having an amorphous structure with 10 % crystallinity due to AgNps was found. IR spectra revealed no chemical interaction between polymers and Nystatin. An increase in thermal stability of formulation was observed till 700 ℃ analyzed by Differential Scanning Calorimetry. Cytotoxic analysis on L929 mouse skin fibroblast cells showed a decrease in cell viability as Ag concentration increased (inactivating Fibroblast and keratinocytes) while 10 mg composition was found safest concentration (94%). Optimized formulation (F2) presented in-vitro drug release up to 90.59% ± 0.76 at pH 7.4, swelling studies (87.5% ± 0.57), water retention (26.60 ± 0.34), pH (5.31 ± 0.03). In the animal burn model, the group that received CHG/Ag/Nystatin healed the wound significantly (p < 0.05). These results suggested that optimized carrier can be used for other anti-fungal drugs facilitating the early healing of the wound.

Non-Invasive Vaccines: Challenges in Formulation and Vaccine Adjuvants

Given the limitations of conventional invasive vaccines, such as the requirement for a cold chain system and trained personnel, needle-based injuries, and limited immunogenicity, non-invasive vaccines have gained significant attention. Although numerous approaches for formulating and administrating non-invasive vaccines have emerged, each of them faces its own challenges associated with vaccine bioavailability, toxicity, and other issues. To overcome such limitations, researchers have created novel supplementary materials and delivery systems. The goal of this review article is to provide vaccine formulation researchers with the most up-to-date information on vaccine formulation and the immunological mechanisms available, to identify the technical challenges associated with the commercialization of non-invasive vaccines, and to guide future research and development efforts.

Negatively charged chitosan nanoparticles prepared by ionotropic gelation for encapsulation of positively charged proteins

The nanoprecipitation of hydrogel nanoparticles by complex coacervation is investigated through a systematic study of the popular chitosan-polyphosphate pair of polyelectrolytes with opposite charges at pH 4. Polyphosphates of varying molar masses and electrical charges are investigated as alternatives to the commonly used tripolyphosphate, so as to assess the influence of the strength of electrostatic interactions on the fabrication possibility, the size of hydrogel particles, and their overall charge. Sodium hexametaphosphate and sodium polyphosphate allow the manufacture of such nanoparticles with either a positive or a negative charge, depending on the chitosan/polyphosphate ratio and the order of mixing. The classical way of mixing by pouring the polyphosphate solution into the chitosan solution yields microparticles. Inverting the order of mixing by pouring the chitosan solution into the polyphosphate solution allows the precipitation of negatively charged nanoparticles with diameters in the range 100-200 nm. Such charge inversion of the chitosan into negative is not possible with the common TPP. It was achieved using sodium hexametaphosphate and sodium polyphosphate having a larger negative charge. Charge inversion of chitosan allows an efficient encapsulation of positively charged proteins with an improved encapsulation efficiency than in the usual TPP-based coacervate. The encapsulation of the bovine serum albumin at pH 4 is given as a case study of a positively charged protein.

Improved infectious burn wound healing by applying lyophilized particles containing probiotics and prebiotics

Lactiplantibacillus plantarum cells were encapsulated in a mixture of cationic and anionic polymers, with the final composition stabilized through freeze-drying. A D-optimal design was used to examine the effects of different polymer concentrations as well as adding prebiotics on the probiotic viability and swelling behavior of the formulations. Scanning electron micrographs revealed stacked particles capable of rapidly absorbing significant amounts of water. These images corresponded to initial swelling percentages of around 2000% for the optimal formulation. The optimized formula had a viability percentage of more than 82%, with the stability studies suggesting that the powders should be stored at refrigerated temperatures. The physical characteristics of the optimized formula were examined to ensure compatibility with its application. According to antimicrobial evaluations, the difference in pathogen inhibition between formulated and fresh probiotics was less than a logarithm. The final formula was tested in vivo and showed improved wound healing indicators. The optimized formula resulted in a higher rate of wound closure and infection clearance. Furthermore, the molecular studies for oxidative stress indicated that the formula could modify wound inflammatory responses. In histological investigations, the probiotic-loaded particles functioned exactly as efficaciously as silver sulfadiazine ointment did.

Pullulan-Based Hydrogels in Wound Healing and Skin Tissue Engineering Applications: A Review

Wound healing is a complex process of overlapping phases with the primary aim of the creation of new tissues and restoring their anatomical functions. Wound dressings are fabricated to protect the wound and accelerate the healing process. Biomaterials used to design dressing of wounds could be natural or synthetic as well as the combination of both materials. Polysaccharide polymers have been used to fabricate wound dressings. The applications of biopolymers, such as chitin, gelatin, pullulan, and chitosan, have greatly expanded in the biomedical field due to their non-toxic, antibacterial, biocompatible, hemostatic, and nonimmunogenic properties. Most of these polymers have been used in the form of foams, films, sponges, and fibers in drug carrier devices, skin tissue scaffolds, and wound dressings. Currently, special focus has been directed towards the fabrication of wound dressings based on synthesized hydrogels using natural polymers. The high-water retention capacity of hydrogels makes them potent candidates for wound dressings as they provide a moist environment in the wound and remove excess wound fluid, thereby accelerating wound healing. The incorporation of pullulan with different, naturally occurring polymers, such as chitosan, in wound dressings is currently attracting much attention due to the antimicrobial, antioxidant and nonimmunogenic properties. Despite the valuable properties of pullulan, it also has some limitations, such as poor mechanical properties and high cost. However, these properties are improved by blending it with different polymers. Additionally, more investigations are required to obtain pullulan derivatives with suitable properties in high quality wound dressings and tissue engineering applications. This review summarizes the properties and wound dressing applications of naturally occurring pullulan, then examines it in combination with other biocompatible polymers, such chitosan and gelatin, and discusses the facile approaches for oxidative modification of pullulan.

Preparation and Characterization of Chitosan/LDH Composite Membranes for Drug Delivery Application

In this study, composite membranes based on chitosan (CS), layered double hydroxide (LDH), and diclofenac were prepared via dispersing of LDH and diclofenac (DCF) in the chitosan matrix for gradual delivery of diclofenac sodium. The effect of using LDH in composites was compared to chitosan loaded with diclofenac membrane. LDH was added in order to develop a system with a long release of diclofenac sodium, which is used in inflammatory conditions as an anti-inflammatory drug. The prepared composite membranes were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscope Analysis (SEM), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analysis (TGA) and UV-Vis Spectroscopy. The results of the FTIR and XPS analyses confirmed the obtaining of the composite membrane and the efficient incorporation of diclofenac. It was observed that the addition of LDH can increase the thermal stability of the composite membrane and favors the gradual release of diclofenac, highlighted by UV-Vis spectra that showed a gradual release in the first 48 h. In conclusion, the composite membrane based on CS-LDH can be used in potential drug delivery application.

Green preparation, characterization, evaluation of anti-melanogenesis effect and in vitro/in vivo safety profile of kojic acid hydrogel as skin lightener formulation

The local treatment of kojic acid (KA) as a tyrosinase inhibitor results in inadequate skin absorption and a number of side effects. The current study aims to maximize KA skin delivery. To produce KA-hydrogel, 1% KA was injected into a Chitosan/alginate hydrogel. The impacts of biopolymer proportion on the KA-hydrogel preparations were investigated. Swelling analysis, weight loss analysis, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), UV absorption spectroscopy, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy were used to evaluate the KA-hydrogel. The swelling percentages of KA-hydrogel increased significantly after 4 h. After two weeks, up to 60% of the primary mass of the KA- hydrogel has been removed. By alternation in biopolymer proportion, the drug release profile of KA-hydrogel demonstrated a sustained pattern. According to the skin absorption experiment, KA-hydrogel had higher skin deposition (25.630 ± 3.350%) than KA-plain gel (5.170 ± 0.340%). Moreover, an in vitro cytotoxicity analysis for the modified KA-hydrogel preparations revealed no cytotoxic effects on HFF cell line (90%). Moreover, KA hydrogel had inhibitory effect on melanin synthesis and are comparable with KA. Furthermore, KA-hydrogel had higher inhibitory effect on L-dopa auto oxidation (94.84 ± 2.41%) in comparison KA solution (73.95 ± 3.28%). Also, the dermal irritation study on Wistar rat revealed that the hydrogel constituent used did not irritate the skin. These results revealed that the KA-hydrogel might be employed as KA local administration, thus opening up new prospects for the therapies of hyperpigmentation problems.

Novel Polymeric Nanomaterial Based on Poly(Hydroxyethyl Methacrylate-Methacryloylamidophenylalanine) for Hypertension Treatment: Properties and Drug Release Characteristics

In this study, a novel polymeric nanomaterial was synthesized and characterized, and it its potential usability in hypertension treatment was demonstrated. For these purposes, a poly(hydroxyethyl methacrylate-methacryloylamidophenylalanine)-based polymeric nanomaterial (p(HEMPA)) was synthesized using a mini-emulsion polymerization technique. The nanomaterials were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and zeta size analysis. The synthesized p(HEMPA) nanomaterial had a diameter of about 113 nm. Amlodipine-binding studies were optimized by changing the reaction conditions. Under optimum conditions, amlodipine's maximum adsorption value (Qmax) of the p(HEMPA) nanopolymer was found to be 145.8 mg/g. In vitro controlled drug release rates of amlodipine, bound to the nanopolymer at the optimum conditions, were studied with the dialysis method in a simulated gastrointestinal system with pH values of 1.2, 6.8 and 7.4. It was found that 99.5% of amlodipine loaded on the nanomaterial was released at pH 7.4 and 72 h. Even after 72 h, no difference was observed in the release of AML. It can be said that the synthesized nanomaterial is suitable for oral amlodipine release. In conclusion, the synthesized nanomaterial was studied for the first time in the literature as a drug delivery system for use in the treatment of hypertension. In addition, AML-p(HEMPA) nanomaterials may enable less frequent drug uptake, have higher bioavailability, and allow for prolonged release with minimal side effects.

Cationic Chitosan/Pectin Polyelectrolyte Nanocapsules of Moxifloxacin as Novel Topical Management System for Bacterial Keratitis

PURPOSE

Moxifloxacin (MOX) is a fourth-generation fluoroquinolone and a broad spectrum antibiotic used in the management of bacterial keratitis (BK). This investigation aimed to formulate MOX-loaded chitosan/pectin cationic polyelectrolyte nanocapsules (CPNCs) for the effective topical treatment of BK.

METHODS

Physicochemical properties like nanocapsule size, charge, drug entrapment efficiency (EE), viscosity, pH, and in-vitro release profile of CPNCs were evaluated. The in-vitro antibacterial activity of CPNCs and marketed formulations (MFs) was studied against Staphylococcus aureus. Ex-vivo corneal permeation studies of CPNCs were evaluated with the help of a modified diffusion apparatus, which was used with goat cornea. The pharmacodynamic study was performed with optimized CPNCs on a BK-induced rabbit eye model and compared with MF.

RESULTS

The optimized nanocapsules appeared as positive charge (+19.91 ± 0.66) with a nano size (242.0 ± 0.30 nm) as calculated by the dynamic light scattering method. The in-vitro release profile of CPNCs exhibited sustained release properties. The ex-vivo permeation pattern also supported the improved drug permeation through the cornea from CPNCs as compared with MF. Draize irritation studies confirmed that the prepared formulation is compatible with the corneal tissue. The in-vivo study concluded that the antibacterial activity of CPNCs was improved when evaluated with MF.

CONCLUSION

The obtained results showed that CPNCs were the better choice for the management of BK therapy due to its capability to improve the corneal adhesion of CPNCs through direct interaction with the mucous membrane of the corneal tissue.

Sodium Alginate—Natural Microencapsulation Material of Polymeric Microparticles

From the multitude of materials currently available on the market that can be used in the development of microparticles, sodium alginate has become one of the most studied natural anionic polymers that can be included in controlled-release pharmaceutical systems alongside other polymers due to its low cost, low toxicity, biocompatibility, biodegradability and gelatinous die-forming capacity in the presence of Ca²⁺ ions. In this review, we have shown that through coacervation, the particulate systems for the dispensing of drugs consisting of natural polymers are nontoxic, allowing the repeated administration of medicinal substances and the protection of better the medicinal substances from degradation, which can increase the capture capacity of the drug and extend its release from the pharmaceutical form.

Formulation, Characterisation and Evaluation of the Antihypertensive Peptides, Isoleucine-Proline-Proline and Leucine-Lysine-Proline in Chitosan Nanoparticles Coated with Zein for Oral Drug Delivery

Isoleucine-Proline-Proline (IPP) and Leucine-Lysine-Proline (LKP) are food-derived tripeptides whose antihypertensive functions have been demonstrated in hypertensive rat models. However, peptides display low oral bioavailability due to poor intestinal epithelial permeability and instability. IPP and LKP were formulated into nanoparticles (NP) using chitosan (CL113) via ionotropic gelation and then coated with zein. Following addition of zein, a high encapsulation efficiency (EE) (>80%) was obtained for the NP. In simulated gastric fluid (SGF), 20% cumulative release of the peptides was achieved after 2 h, whereas in simulated intestinal fluid (SIF), ~90% cumulative release was observed after 6 h. Higher colloidal stability (39−41 mV) was observed for the coated NP compared to uncoated ones (30−35 mV). In vitro cytotoxicity studies showed no reduction in cellular viability of human intestinal epithelial Caco-2 and HepG2 liver cells upon exposure to NP and NP components. Administration of NP encapsulating IPP and LKP by oral gavage to spontaneously hypertensive rats (SHR) attenuated systolic blood pressure (SBP) for 8 h. This suggests that the NP provide appropriate release to achieve prolonged hypotensive effects in vivo. In conclusion, chitosan-zein nanoparticles (CZ NP) have potential as oral delivery system for the encapsulation of IPP and LKP.

Physical, Chemical, and Biological Properties of Chitosan-Coated Alginate Microparticles Loaded with Porcine Interleukin-1β: A Potential Protein Adjuvant Delivery System

We previously developed chicken interleukin-1β (IL-1β) mutants as single-dose adjuvants that induce protective immunity when co-administered with an avian vaccine. However, livestock such as pigs may require a vaccine adjuvant delivery system that provides long-lasting protection to reduce the need for successive booster doses. Therefore, we developed chitosan-coated alginate microparticles as a carrier for bovine serum albumin (BSA) or porcine IL-1β (pIL-1β) and assessed their physical, chemical, and biological properties. Electrospraying of the BSA-loaded alginate microparticles (BSA/ALG MPs) resulted in an encapsulation efficiency of 50%, and those MPs were then coated with chitosan (BSA/ALG/CHI MPs). Optical and scanning electron microscopy, zeta potential analysis, and Fourier transform infrared spectroscopy were used to characterize these MPs. The BSA encapsulation parameters were applied to ALG/CHI MPs loaded with pIL-1β, which were not cytotoxic to porcine fibroblasts but had enhanced bio-activity over unencapsulated pIL-1β. The chitosan layer of the BSA/ALG/CHI MPs prevented burst release and facilitated sustained release of pIL-1β for at least 28 days. In conclusion, BSA/ALG/CHI MPs prepared as a carrier for pIL-1β may be used as an adjuvant for the formulation of pig vaccines.

Chitosan Nanoparticle Encapsulation of Antibacterial Essential Oils

Chitosan is the most suitable encapsulation polymer because of its natural abundance, biodegradability, and surface functional groups in the form of free NH₂ groups. The presence of NH₂ groups allows for the facile grafting of functionalized molecules onto the chitosan surface, resulting in multifunctional materialistic applications. Quaternization of chitosan's free amino is one of the typical chemical modifications commonly achieved under acidic conditions. This quaternization improves its ionic character, making it ready for ionic-ionic surface modification. Although the cationic nature of chitosan alone exhibits antibacterial activity because of its interaction with negatively-charged bacterial membranes, the nanoscale size of chitosan further amplifies its antibiofilm activity. Additionally, the researcher used chitosan nanoparticles as polymeric materials to encapsulate antibiofilm agents (such as antibiotics and natural phytochemicals), serving as an excellent strategy to combat biofilm-based secondary infections. This paper provided a summary of available carbohydrate-based biopolymers as antibiofilm materials. Furthermore, the paper focuses on chitosan nanoparticle-based encapsulation of basil essential oil (Ocimum basilicum), mandarin essential oil (Citrus reticulata), Carum copticum essential oil ("Ajwain"), dill plant seed essential oil (Anethum graveolens), peppermint oil (Mentha piperita), green tea oil (Camellia sinensis), cardamom essential oil, clove essential oil (Eugenia caryophyllata), cumin seed essential oil (Cuminum cyminum), lemongrass essential oil (Cymbopogon commutatus), summer savory essential oil (Satureja hortensis), thyme essential oil, cinnamomum essential oil (Cinnamomum zeylanicum), and nettle essential oil (Urtica dioica). Additionally, chitosan nanoparticles are used for the encapsulation of the major essential components carvacrol and cinnamaldehyde, the encapsulation of an oil-in-water nanoemulsion of eucalyptus oil (Eucalyptus globulus), the encapsulation of a mandarin essential oil nanoemulsion, and the electrospinning nanofiber of collagen hydrolysate-chitosan with lemon balm (Melissa officinalis) and dill (Anethum graveolens) essential oil.

Immobilization Systems of Antimicrobial Peptide Ib−M1 in Polymeric Nanoparticles Based on Alginate and Chitosan

The development of new strategies to reduce the use of traditional antibiotics has been a topic of global interest due to the resistance generated by multiresistant microorganisms, including Escherichia coli, as etiological agents of various diseases. Antimicrobial peptides are presented as an alternative for the treatment of infectious diseases caused by this type of microorganism. The Ib−M1 peptide meets the requirements to be used as an antimicrobial compound. However, it is necessary to use strategies that generate protection and resist the conditions encountered in a biological system. Therefore, in this study, we synthesized alginate and chitosan nanoparticles (Alg−Chi NPs) using the ionic gelation technique, which allows for the crosslinking of polymeric chains arranged in nanostructures by intermolecular interactions that can be either covalent or non-covalent. Such interactions can be achieved through the use of crosslinking agents that facilitate this binding. This technique allows for immobilization of the Ib−M1 peptide to form an Ib−M1/Alg−Chi bioconjugate. SEM, DLS, and FT-IR were used to determine the structural features of the nanoparticles. We evaluated the biological activity against E. coli ATCC 25922 and Vero mammalian cells, as well as the stability at various temperatures, pH, and proteases, of Ib−M1 and Ib−M1/Alg-Chi. The results showed agglomerates of nanoparticles with average sizes of 150 nm; an MIC of 12.5 µM, which was maintained in the bioconjugate; and cytotoxicity values close to 40%. Stability was maintained against pH and temperature; in proteases, it was only evidenced against pepsin in Ib−M1/Alg-Chi. The results are promising with respect to the use of Ib−M1 and Ib−M1/Alg−Chi as possible antimicrobial agents.

Alginate-based nanocarriers for the delivery and controlled-release of bioactive compounds

Alginate-based nanocarriers are propitious vehicles used for the delivery of bioactive compounds (bioactives). In this area, calcium alginate and sodium alginate are the most promising wall materials because they are nontoxic, comparatively cheap, simple in production, biocompatible and biodegradable. In this review, we have highlighted different alginate-based nanocarriers such as nanoparticles, nanofibers, nanoemulsions, nanocomplexes, and nanohydrogels; also entrapment of different bioactives within alginate nanocarriers and their bioavailability in the gastric environment has been comprehensively discussed. Being biopolymers, alginates can be exploited as emulsifiers/ encapsulants for entrapment and delivery of different bioactives such as vitamins, minerals, essential fatty acids, peptides, essential oils, bioactive oils, polyphenols and carotenoids. Furthermore, the use of alginate-based nanocarriers in combination with other polysaccharides/ emulsifiers was recognized as the most effective and favorable approach for the protection, delivery and sustained release of bioactives.

Synthesis of vildagliptin loaded acrylamide-g-psyllium/alginate-based core-shell nanoparticles for diabetes treatment

Diabetes mellitus has become a major public health concern all over the world. Vildagliptin is one of the antidiabeticdrug that can overcome the existing problem of this prevalent disease. Present study aims to synthesize and investigate the role of vildagliptin-loaded core-shell nanoparticle of grafted psyllium and alginate (VG@P/A-NPs) in anti-diabetes application. FTIR, SEM, XRD, ¹³CNMR and zeta analyzer were used for characterization of the core-shell nanoparticles (VG@P/A-NPs). The synthesized acrylamide-grafted-psyllium was also optimized through varying grafting parameters such as acrylamide and ceric ammonium nitrate (CAN) concentration, time and temperature to obtain the maximum yield of acrylamide-grafted-psyllium. Rheological analysis of pure psyllium, grafted psyllium and alginate were also performed. For biological studies, the first cytotoxicity of grafted psyllium and VG@P/A-NPs were examined on human lung adenocarcinoma cell line A549 in which it was observed that VG@P/A-NPs did not exhibited any toxicity. The antidiabetic potential of VG@P/A-NPs was investigated by glucose uptake assay, using TNF-α induced insulin resistance skeletal cell model using mouse muscle L6 cell line. The insulin signaling impaired cell line displayed a highly significant (p < 0.0001) dose-dependent increase in glucose uptake after treatment with increasing doses of VG@P/A-NPs.The drug release behavior of VG@P/A-NPs was examined at various pH and the highest drug release (98 %) was obtained at pH (7.4). The drug release kinetic data was following the Higuchi (R² = 0.9848) kinetic model, suggesting the release of drug from vildagliptin-loaded grafted psyllium-alginate core-shell nanoparticles (VG@P/A-NPs) as a square root of time-dependent process and diffusion controlled. This study provides an economical and environment-friendly approach towards the synthesis of VG@P/A-NPs with antidiabetes applications.

Mucus-Penetrating Alginate-Chitosan Nanoparticles Loaded with Berberine Hydrochloride for Oral Delivery to the Inflammation Site of Ulcerative Colitis

The rectal enemas of berberine hydrochloride (BH) have emerged as one of the most effective strategies in the clinical treatment of ulcerative colitis (UC). However, oral dosages of BH exhibit a poor anti-inflammatory effect of UC, which may attribute to premature absorption of BH by the upper gastrointestinal tract. Moreover, the thick colonic mucus layer obstructs the penetration of the drug, resulting in low bioavailability to the inflammatory site of the colon. The aim of this study was to develop the mucus-penetrating sodium alginate-chitosan nanoparticles (SA-CS NPs) for oral delivery of BH to the site of colonic ulcer lesions. BH-loaded SA-CS NPs were developed through the ionic gelation method and analyzed for physicochemical characteristics, release performance, penetrability, site retention, and therapeutic efficacy. The results showed that the NPs have a particle size of 257 nm with a negative charge, presenting desired pH-dependent release behavior. The permeation studies elucidated that negatively charged SA-CS NPs had 2.9 times higher mucus penetration ability than positively charged CS NPs. An ex vivo retention study indicated the high retention of BH-SA-CS NPs at the colon site for more than 16 h. In vivo therapeutic effectiveness demonstrated that the prepared NPs could not only alleviate colonic injury by decreasing the disease activity index and colon mucosa damage index, but also improve the immunologic function by decreasing the spleen index. In conclusion, the BH-SA-CS NPs could enhance the mucus permeability and deliver drugs to the colonic inflammation site, providing new insights into improving the therapeutic effect of UC.

Construction and Evaluation of Chitosan-Based Nanoparticles for Oral Administration of Exenatide in Type 2 Diabetic Rats

Oral delivery of therapeutic peptides has been a daunting challenge due to poor transport across the tight junctions and susceptibility to enzymatic degradation in the gastrointestinal tract. Numerous advancement in nanomedicine has been made for the effective delivery of protein and peptide. Owing to the superior performance of chitosan in opening intercellular tight junctions of epithelium and excellent mucoadhesive properties, chitosan-based nanocarriers have recently garnered considerable attention, which was formulated in this paper to orally deliver the GLP-1 drug (Exenatide). Against this backdrop, we used chitosan (CS) polymers to encapsulate the exenatide, sodium tripolyphosphate (TPP) as the cross-linking agent and coated the exterior with sodium alginate (ALG) to impart the stability in an acidic environment. The chitosan/alginate nanoparticles (CS-TPP-ALG) functioned as a protective exenatide carrier, realized efficient cellular uptake and controlled release, leading to a steady hypoglycemic effect and a good oral bioavailability in vivo. Trimethyl chitosan (TMC), a chitosan derivative with stronger positive electrical properties was additionally selected as a substitute for chitosan to construct the TMC-TPP-ALG nanoparticle, and its oral peptide delivery capacity was explored in terms of both characterization and pharmacodynamics studies. Overall, our study demonstrated that functional chitosan/alginate nanoparticles can protect proteins from enzymatic degradation and enhance oral absorption, which presents important research value and application prospects.

Calcium Ion-Sodium Alginate-Piperine-Based Microspheres: Evidence of Enhanced Encapsulation Efficiency, Bio-Adhesion, Controlled Delivery, and Oral Bioavailability of Isoniazid

Isoniazid (INH) is a first-line chemotherapeutic drug employed in the management of tuberculosis. However, its extensive first-pass metabolism, short-life life, and low oral bioavailability confined its medical application. Therefore, the calcium ion-alginate-piperine microspheres (INH-CaSP Ms) was prepared to enhance encapsulation efficiency, controlled delivery, and oral bioavailability of INH. The INH-CaSP Ms was developed using a modified emulsification method and optimized via Box-Behnken design (BBD). Optimized INH-CaSP Ms were characterized for encapsulation efficiency, differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), bio-adhesion, in vitro dissolution, ex vivo permeation, and oral bioavailability studies. Characterization studies confirmed the formation of microspheres. The INH-CaSP Ms showed spherical microspheres with enhanced encapsulation efficiency (~ 93.03 ± 1.54% w/w). The optimized INH-CaSP Ms exhibited higher bio-adhesion around (~ 81.41 ± 1.31%). The INH-CaSP Ms enhanced the dissolution rate of INH (~ 57%) compared to pure INH (~ 57%) and INH-SA Ms (~ 81%) in simulated gastric fluid (SGF, pH 1.2) and simulated intestinal fluid (SIF, pH 7.4). The same formulations improved the permeation rate of INH (~ 90%) compared to pure INH (~ 55%) and INH-SA Ms (~ 80%). The oral bioavailability results indicated that INH-CaSP Ms appreciably improved the oral bioavailability of INH via increasing the Cmax, Tmax, t_1/2, and AUC parameters compared to pure INH. The study demonstrates that the development of INH-CaSP Ms via cross-linked coordinate bond interaction between divalent cation calcium ion-alginate complex and anion piperine bio-enhancer is an effective approach for enhancing the encapsulation efficiency, bio-adhesion, controlled release, and oral bioavailability of INH.

Formulation of selenium nanoparticles encapsulated by alginate-chitosan for controlled delivery of Vibrio Cholerae LPS: A novel delivery system candidate for nanovaccine

The lipopolysaccharide (LPS) of Vibrio cholerae plays a significant role in stimulating primary protection and immune responses. LPS delivery has been limited by the stimulation of inflammatory cytokines. This work aimed to report the synthesis and performance of this formulation in modulating immune responses and protecting LPS against acidic gastric medium. Alg-Cs-LPS-SeNPs composite was fabricated by an ionic cross-linking/in situ reduction method. Cytokines TNF-α, IL-6, IL-10, and TGF-β were assessed after cells were incubated with different compounds of the system. The main outcomes revealed that encapsulation of LPS-loaded SeNPs in the alginate-chitosan complex was associated with a high entrapment efficiency and could effectively protect LPS against acidic GIT medium. Kinetic profiling revealed that LPS was more slowly released from LPS-loaded Alg-Cs-LPS-SeNPs at pH 1.2, 7.4, and 6.8. These results indicated that Alg-Cs-LPS-SeNPs composite was able to significantly increase anti-inflammatory cytokines and reduce the release of pro-inflammatory cytokines. Thus, these findings show that this system for LPS delivery could be easily biosynthesized and encapsulated for use in the pharmaceutical industry. This study provides proof of the potential for future use of oral LPS vaccines, concomitantly inducing immunomodulatory effects.

Chitosan biological molecule improves bactericidal competence of ceftazidime against Burkholderia pseudomallei biofilms

Biofilm-associated Burkholderia pseudomallei infections (melioidosis) are problematic because of reduced sensitivity to antibiotics and high frequency of relapse. Biofilm dispersal agents are essential to liberate the biofilm-encased cells, which then become planktonic and are more susceptible to antibiotics. This study aimed to evaluate the ability of deacetylated chitosan (dCS), an antimicrobial and antibiofilm biological macromolecule, to disrupt established biofilms, thus enabling ceftazidime (CAZ) to kill biofilm-embedded B. pseudomallei. We combined dCS with CAZ using a mechanical stirring method to generate dCS/CAZ. In combination, 1.25-2.5 mg ml^-1 dCS/1-2 μg ml^-1 CAZ acted synergistically to kill cells more effectively than did either dCS or CAZ alone. Notably, a combination of 5-10 mg ml^-1 dCS with 256-512 μg ml^-1 CAZ, prepared either by mechanical stirring (dCS/CAZ) or mixing (dCS + CAZ), drastically improved bactericidal activities against biofilm cells leading to a 3-6 log CFU reduction. Confocal laser-scanning microscope (CLSM) images revealed that 10 mg ml^-1 dCS/512 μg ml^-1 CAZ is by far the best formulation to diminish B. pseudomallei biofilm biomass and produces the lowest live/dead cell ratios of B. pseudomallei in biofilm matrix. Collectively, these findings emphasize the potential of novel therapeutic antibacterial and antibiofilm agents to fight against antibiotic-tolerant B. pseudomallei biofilm-associated infections.

Chitosan/Alginate Nanoparticles for the Enhanced Oral Antithrombotic Activity of Clam Heparinoid from the Clam Coelomactra antiquata

Chitosan/alginate nanoparticles (DG1-NPs and DG1/Cur-NPs) aiming to enhance the oral antithrombotic activity of clam heparinoid DG1 were prepared by ionotropic pre-gelation. The influence of parameters, such as the concentration of sodium alginate (SA), chitosan (CTS), CaCl2, clam heparinoid DG1, and curcumin (Cur), on the characteristics of the nanoparticles, were investigated. Results indicate that chitosan and alginate can be used as polymer matrices to encapsulate DG1, and nanoparticle characteristics depend on the preparation parameters. Nano-particles should be prepared using 0.6 mg/mL SA, 0.33 mg/mL CaCl2, 0.6 mg/mL CTS, 7.2 mg/mL DG1, and 0.24 mg/mL Cur under vigorous stirring to produce DG1-NPS and DG1/Cur-NPS with small size, high encapsulation efficiency, high loading capacity, and negative zeta potential from approximately −20 to 30 mV. Data from scanning electron microscopy, Fourier-transform infrared spectrometry, and differential scanning calorimetry analyses showed no chemical reaction between DG1, Cur, and the polymers; only physical mixing. Moreover, the drug was loaded in the amorphous phase within the nanoparticle matrix. In the acute pulmonary embolism murine model, DG1-NPs enhanced the oral antithrombotic activity of DG1, but DG1/Cur-NPs did not exhibit higher antithrombotic activity than DG1-NPs. Therefore, the chitosan/alginate nanoparticles enhanced the oral antithrombotic activity of DG1, but curcumin did not further enhance this effect.

Emerging concerns of infectious diseases and drug delivery challenges

Emerging infectious diseases are the infections that could be newly appeared or have existed demographic area with rapidly increasing in some geographic range. Among various types of emerging infectious diseases like Ebola, chikungunya, tuberculosis, SARS, MERS, avian flu, swine flu, Zika, and so on, very recently we have witnessed the emergence of recently recognized coronavirus infection as Covid-19 pandemic caused by SARS-CoV-2, which rapidly spread around the world. Various emerging factors precipitating disease emergence include environmental, demographic, or ecological that increase the contact of people with unfamiliar microbial agents or their host or promote dissemination. Here in this chapter, we reviewed the various emerging considerations of infectious diseases including factors responsible for emerging and re-emerging infectious diseases as well as drug delivery challenges to treat infectious diseases and various strategies to deal with these challenges including nanotheranostics. Nanotheranostics are showing potential toward real-time understanding, diagnosis, and monitoring the response of the chemotherapy during treatment with reduced nontarget toxicity and enhanced safety level in the recent research studies.

Synthesis of Eudragit® L100-coated chitosan-based nanoparticles for oral enoxaparin delivery

Enoxaparin is an effective biological molecule for prevention and treatment of coagulation disorders. However, it is poorly absorbed in the gastrointestinal tract. In this study, we developed an Eudragit® L100 coated chitosan core shell nanoparticles for enoxaparin oral delivery (Eud/CS/Enox NPs) through a completely eco-friendly method without employing any high-energy homogenizer technique and any organic solvents. Spherical nanocarriers were successfully prepared with particle size lower than 300 nm, polydispersity index about 0.12 and zeta potential higher than +25 mV, entrapment efficiency greater than 95% and the in vitro release behavior confirms the good colloidal stability and the successful Eudragit® L100 coating process demonstrated by negligible cumulative enoxaparin release (<10%) when the particles are submitted to simulated gastric fluid conditions. Finally, we demonstrated that the core-shell structure of the particle influenced the drug release mechanism of the formulations, indicating the presence of the Eudragit® L100 on the surface of the particles. These results suggested that enteric-coating approach and drug delivery nanotechnology can be successfully explored as potential tools for oral delivery of enoxaparin.

Oral delivery of infliximab using nano-in-microparticles for the treatment of inflammatory bowel disease

The anti-tumor necrosis factor-α (anti-TNF-α) blocker, has shown great efficacy for the treatment of inflammatory bowel disease (IBD). However, systemic exposure to it can cause considerable safety problems due to reduced suppression of the systemic immune response and loss of response to the production of anti-drug antibodies. Thus, we try to devise a targeted vehicle system for oral administration of anti-TNF-α antibodies for the treatment of IBD. In the present study, we developed an oral Infliximab (IFX) loaded nano-in-microparticles, based on chitosan (CS)/carboxymethyl chitosan (CMC) and alginate (Alg), which could protect IFX from the harsh environment of the gastrointestinal tract and produce targeted drug delivery to the inflamed intestine. In vivo studies demonstrated that the IFX loaded nano-in-micro vehicle can alleviate colitis by ameliorating inflammation and maintaining the intestinal epithelial barrier.

Evaluating the Anticarcinogenic Activity of Surface Modified/Functionalized Nanochitosan: The Emerging Trends and Endeavors

Chitosan begins its humble journey from marine food shell wastes and ends up as a versatile nutraceutical. This review focuses on briefly discussing the antioxidant activity of chitosan and retrospecting the accomplishments of chitosan nanoparticles as an anticarcinogen. The various modified/functionalized/encapsulated chitosan nanoparticles and nanoforms have been listed and their biomedical deliverables presented. The anticancer accomplishments of chitosan and its modified composites have been reviewed and presented. The future of surface modified chitosan and the lacunae in the current research focus have been discussed as future perspective. This review puts forth the urge to expand the scientific curiosity towards attempting a variety of functionalization and surface modifications to chitosan. There are few well known modifications and functionalization that benefit biomedical applications that have been proven for other systems. Being a biodegradable, biocompatible polymer, chitosan-based nanomaterials are an attractive option for medical applications. Therefore, maximizing expansion of its bioactive properties are explored. The need for applying the ideal functionalization that will significantly promote the anticancer contributions of chitosan nanomaterials has also been stressed.

Polymeric Lipid Hybrid Nanoparticles (PLNs) as Emerging Drug Delivery Platform-A Comprehensive Review of Their Properties, Preparation Methods, and Therapeutic Applications

Polymeric lipid hybrid nanoparticles (PLNs) are core–shell nanoparticles made up of a polymeric kernel and lipid/lipid–PEG shells that have the physical stability and biocompatibility of both polymeric nanoparticles and liposomes. PLNs have emerged as a highly potent and promising nanocarrier for a variety of biomedical uses, including drug delivery and biomedical imaging, owing to recent developments in nanomedicine. In contrast with other forms of drug delivery systems, PLNs have been regarded as seamless and stable because they are simple to prepare and exhibit excellent stability. Natural, semi-synthetic, and synthetic polymers have been used to make these nanocarriers. Due to their small scale, PLNs can be used in a number of applications, including anticancer therapy, gene delivery, vaccine delivery, and bioimaging. These nanoparticles are also self-assembled in a reproducible and predictable manner using a single or two-step nanoprecipitation process, making them significantly scalable. All of these positive attributes therefore make PLNs an attractive nanocarrier to study. This review delves into the fundamentals and applications of PLNs as well as their formulation parameters, several drug delivery strategies, and recent advancements in clinical trials, giving a comprehensive insight into the pharmacokinetic and biopharmaceutical aspects of these hybrid nanoparticles.

Chitosan alginate nanoparticles as a platform for the treatment of diabetic and non-diabetic pressure ulcers: Formulation and in vitro/in vivo evaluation

Chitosan and alginate are natural bioactive polymers with wound healing properties, in addition to chitosan's anti-bacterial properties. In this study, these two polymers were combined in a drug-free nanosystem with positive or negative surface charges, for the treatment of non-diabetic and diabetic pressure ulcers. Chitosan alginate nanoparticles (CA NPs) were prepared by a modified ionic gelation method. Interaction between the polymers and formation of the NPs were confirmed by Fourier-Transform infrared spectroscopy, differential scanning calorimetry and transmission electron microscopy. For in vivo study, selected CA NPs with optimum particle size, polydispersity index, positive and negative zeta potential, were evaluated for their pressure ulcers-healing effect using non-diabetic and diabetic rats. Rate of wound closure, histological examination and histomorphometric assessment were used to evaluate the CA NPs' wound healing potential. Positively and negatively charged CA NPs significantly enhanced wound closure rates, compared to control untreated group. Histological and histomorphometric analysis revealed higher quality and maturation of the formed granulation tissue, less inflammation and higher collagen content with positively charged CA NPs containing higher amount of chitosan. These results suggest that chitosan alginate nanoparticles offer a promising platform for diabetic and non-diabetic wound healing applications.

Pharmacokinetic variables of medium molecular weight cross linked chitosan nanoparticles to enhance the bioavailability of 5-fluorouracil and reduce the acute oral toxicity

To prepare glutaraldehyde-based cross-linked medium molecular weight chitosan nanoparticles encapsulated with 5-Fluorouracil (5-FU), to overcome dosing frequency as well as reducing acute oral toxicity and poor bioavailability of the drug. Medium molecular weight chitosan nanoparticles (MMWCH-NPs) were prepared by reverse micelles method based on glutaraldehyde (GA) cross-linking and optimized by the process as well as formulation variables like a various drug to polymer ratio, cross-linker volumes, varying stirring speeds (rpm), different time of rotation/stirring, respectively and their effects on the mean particles size distribution and entrapment efficiency %EE and %LC of NPs. Characterization of formulations was done by FTIR studies, TEM, PXRD, TGA, Stability, and dissolution drug release studies were performed by dialysis bag technique at both pH (1.2 & 7.4) and acute oral toxicity studies in albino rabbits. The formulated nanoparticles showed a smooth morphology with smaller particle size distribution (230–550 nm), zeta potential (−15 to −18 mV) required to achieve enhanced permeation and retention effect (EPR), entrapment efficiency (%EE 12–59%). These NPs exhibited a controlled drug release profile with 84.36% of the drug over a period of 24 h. Drug release data were fitted to different kinetic models which predominantly followed Fickian diffusion mechanism (R² = 0.972–0.976, N = 0.326–0.256). The optimized formulation (5-FU6) was observed under DSC/TGA, TEM. PXRD curves, FTIR, which confirmed thermal stability, structural integrity, amorphous state, compatibility between drug and polymer of optimized (5-FU6) as well as reduced acute oral toxicity in albino rabbits. Cross-linked medium molecular weight chitosan nanoparticles are nontoxic, well-tolerated therefore could be the future candidate for therapeutic effects as novel drug delivery carrier for anticancer drug(s).

Green Synthesized Chitosan/Chitosan Nanoforms/Nanocomposites for Drug Delivery Applications

Chitosan has become a highlighted polymer, gaining paramount importance and research attention. The fact that this valuable polymer can be extracted from food industry-generated shell waste gives it immense value. Chitosan, owing to its biological and physicochemical properties, has become an attractive option for biomedical applications. This review briefly runs through the various methods involved in the preparation of chitosan and chitosan nanoforms. For the first time, we consolidate the available scattered reports on the various attempts towards greens synthesis of chitosan, chitosan nanomaterials, and chitosan nanocomposites. The drug delivery applications of chitosan and its nanoforms have been reviewed. This review points to the lack of systematic research in the area of green synthesis of chitosan. Researchers have been concentrating more on recovering chitosan from marine shell waste through chemical and synthetic processes that generate toxic wastes, rather than working on eco-friendly green processes-this is projected in this review. This review draws the attention of researchers to turn to novel and innovative green processes. More so, there are scarce reports on the application of green synthesized chitosan nanoforms and nanocomposites towards drug delivery applications. This is another area that deserves research focus. These have been speculated and highlighted as future perspectives in this review.

Cationic Polyelectrolyte Nanocapsules of Moxifloxacin for Microbial Keratitis Therapy: Development, Characterization, and Pharmacodynamic Study

Microbial keratitis (MK) is a vision-threatening disease and the fourth leading cause of blindness worldwide. In this work, we aim to develop moxifloxacin (MXN)-loaded chitosan-based cationic mucoadhesive polyelectrolyte nanocapsules (PENs) for the effective treatment of MK. PENs were formulated by polyelectrolyte complex coacervation method and characterized for their particle size, surface charge, morphology, mucoadhesive property, in-vitro and ex-vivo release, ocular tolerance, and antimicrobial efficacy studies. The pharmacodynamic study was conducted on rabbit eye model of induced keratitis and it is compared with marketed formulation (MF). Developed PENs showed the size range from 230.7 ± 0.64 to 249.0 ± 0.49 nm and positive surface charge, spherical shape along with appropriate physico-chemical parameters. Both in-vitro and ex-vivo examination concludes that PENs having more efficiency in sustained release of MXN compared to MF. Ocular irritation studies demonstrated that no corneal damage or ocular irritation. The in-vivo study proved that the anti-bacterial efficacy of PENs was improved when compared with MF. These results suggested that PENs are a feasible choice for MK therapy because of their ability to enhance ocular retention of loaded MXN through interaction with the corneal surface of the mucous membrane.