A novel approach for the development and optimization of self emulsifying drug delivery system using HLB and response surface methodology: Application to fenofibrate encapsulation

Step-By-Step Standardization of the Bottom-Up Semi-Automated Nanocrystallization of Pharmaceuticals: A Quality By Design and Design of Experiments Joint Approach

Nanosized drug crystals have been reported with enhanced apparent solubility, bioavailability, and therapeutic efficacy compared to microcrystal materials, which are not suitable for parenteral administration. However, nanocrystal design and development by bottom-up approaches are challenging, especially considering the non-standardized process parameters in the injection step. This work aims to present a systematic step-by-step approach through Quality-by-Design (QbD) and Design of Experiments (DoE) for synthesizing drug nanocrystals by a semi-automated nanoprecipitation method. Curcumin is used as a drug model due to its well-known poor water solubility (0.6 µg mL-1, 25 °C). Formal and informal risk assessment tools allow identifying the critical factors. A fractional factorial 24-1 screening design evaluates their impact on the average size and polydispersity of nanocrystals. The optimization of significant factors is done by a Central Composite Design. This response surface methodology supports the rational design of the nanocrystals, identifying and exploring the design space. The proposed joint approach leads to a reproducible, robust, and stable nanocrystalline preparation of 316 nm with a PdI of 0.217 in compliance with the quality profile. An orthogonal approach for particle size and polydispersity characterization allows discarding the formation of aggregates. Overall, the synergy between advanced data analysis and semi-automated standardized nanocrystallization of drugs is highlighted.

Thymoquinone-loaded self-nano-emulsifying drug delivery system against ischemia/reperfusion injury

In the present study, a self-nano-emulsifying drug delivery system (SNEDDS) was developed to evaluate the efficiency of thymoquinone (TQ) in hepatic ischemia/reperfusion. SNEDDS was pharmaceutically characterized to evaluate droplet size, morphology, zeta potential, thermodynamic stability, and dissolution/diffusion capacity. Animals were orally pre-treated during 10 days with TQ-loaded SNEDDS. Biochemical analyses, hematoxylin-eosin staining, indirect immunofluorescence, and reverse transcription polymerase chain reaction (RT-PCR) were carried out to assess cell injury, oxidative stress, inflammation, and apoptosis. The TQ formulation showed good in vitro characteristics, including stable nanoparticle structure and size with high drug release rate. In vivo determinations revealed that TQ-loaded SNEDDS pre-treatment of rats maintained cellular integrity by decreasing transaminase (ALT and AST) release and preserving the histological characteristics of their liver. The antioxidant ability of the formulation was proven by increased SOD activity, reduced MDA concentration, and iNOS protein expression. In addition, this formulation exerted an anti-inflammatory effect evidenced by reduced plasma CRP concentration, MPO activity, and gene expressions of TLR-4, TNF-α, NF-κB, and IL-6. Finally, the TQ-loaded SNEDDS formulation promoted cell survival by enhancing the Bcl-2/Bax ratio. In conclusion, our results indicate that TQ encapsulated in SNEDDS significantly protects rat liver from I/R injury.

Combined Ramipril and Black Seed Oil Dosage Forms Using Bioactive Self-Nanoemulsifying Drug Delivery Systems (BIO-SNEDDSs)

Purpose: Ramipril (RMP)—an angiotensin-converting enzyme (ACE) inhibitor—and thymoquinone (THQ) suffer from poor oral bioavailability. Developing a combined liquid SNEDDS that comprises RMP and black seed oil (as a natural source of THQ) could lead to several formulations and therapeutic benefits. Methods: The present study involved comprehensive optimization of RMP/THQ liquid SNEDDS using self-emulsification assessment, equilibrium solubility studies, droplet size analysis, and experimentally designed phase diagrams. In addition, the optimized RMP/THQ SNEDDS was evaluated against pure RMP, pure THQ, and the combined pure RMP + RMP-free SNEDDS (capsule-in-capsule) dosage form via in vitro dissolution studies. Results: The phase diagram study revealed that black seed oil (BSO) showed enhanced self-emulsification efficiency with the cosolvent (Transcutol P) and hydrogenated castor oil. The phase diagram studies also revealed that the optimized formulation BSO/TCP/HCO-30 (32.25/27.75/40 % w/w) showed high apparent solubility of RMP (25.5 mg/g), good THQ content (2.7 mg/g), and nanometric (51 nm) droplet size. The in-vitro dissolution studies revealed that the optimized drug-loaded SNEDDS showed good release of RMP and THQ (up to 86% and 89%, respectively). Similarly, the isolation between RMP and SNEDDS (pure RMP + RMP-free SNEDDS) using capsule-in-capsule technology showed >84% RMP release and >82% THQ release. Conclusions: The combined pure RMP + RMP-free SNEDDS (containing black seed oil) could be a potential dosage form combining the solubilization benefits of SNEDDSs, enhancing the release of RMP/THQ along with enhancing RMP stability through its isolation from lipid-based excipients during storage.

Recent and advanced nano-technological strategies for COVID-19 vaccine development

The outbreak of the COVID-19 pandemic in 2019 has been one of the greatest challenges modern medicine and science has ever faced. It has affected millions of people around the world and altered human life and activities as we once knew. The high prevalence as well as an extended period of incubations which usually does not present with symptoms have played a formidable role in the transmission and infection of millions. A lot of research has been carried out on developing suitable treatment and effective preventive measures for the control of the pandemic. Preventive strategies which include social distancing, use of masks, washing of hands, and contact tracing have been effective in slowing the spread of the virus; however, the infectious nature of the SARS-COV-2 has made these strategies unable to eradicate its spread. In addition, the continuous increase in the number of cases and death, as well as the appearance of several variants of the virus, has necessitated the development of effective and safe vaccines in a bid to ensure that human activities can return to normalcy. Nanotechnology has been of great benefit in the design of vaccines as nano-sized materials have been known to aid the safe and effective delivery of antigens as well as serve as suitable adjuvants to potentiate responses to vaccines. There are only four vaccine candidates currently approved for use in humans while many other candidates are at various levels of development. This review seeks to provide updated information on the current nano-technological strategies employed in the development of COVID-19 vaccines.

A Customized Screening Tool Approach for the Development of a Self-Nanoemulsifying Drug Delivery System (SNEDDS)

The present study focused on establishing a novel, (pre-)screening approach that enables the development of promising performing self-nanoemulsifying drug delivery systems (SNEDDSs) with a limited number of experiments. The strategic approach was based on first identifying appropriate excipients (oils/lipids, surfactants, and co-solvents) providing a high saturation solubility for lipophilic model compounds with poor aqueous solubility. Excipients meeting these requirements were selected for SNEDDS development, and a special triangular mixture design was applied for determining excipient ratios for the SNEDDS formulations. Celecoxib and fenofibrate were used as model drugs. Formulations were studied applying a specific combination of in vitro characterization methods. Specifications for a promising SNEDDS formulation were self-imposed: a very small droplet size (< 50 nm), a narrow size distribution of these droplets (PDI < 0.15) and a high transmittance following SNEDDS dispersion in water (> 99% in comparison with purified water). Excipients that provided a nanoemulsion after dispersion were combined, and ratios were optimized using a customized mapping method in a triangular mixture design. The best performing formulations were finally studied for their in vitro release performance. Results of the study demonstrate the efficiency of the customized screening tool approach. Since it enables successful SNEDDS development in a short time with manageable resources, this novel screening tool approach could play an important role in future SNEDDS development.

Quality-by-Design-Based Development of a Voxelotor Self-Nanoemulsifying Drug-Delivery System with Improved Biopharmaceutical Attributes

Low aqueous solubility and poor oral bioavailability are limiting factors in the oral delivery of voxelotor, an antisickling agent. To overcome these limitations, a voxelotor self-nanoemulsifying drug delivery system was developed. Various oils, surfactants, and cosurfactants were screened for their solubilization potential for the drug. The area of nanoemulsification was identified using a ternary phase diagram. An experimental mixture design and a desirability function were applied to select SNEDDSs that contain a maximum amount of lipids and a minimum amount of surfactant, and that possess optimal emulsification properties (i.e., droplet sizes, polydispersity index (PDI), emulsification time, and transmittance percentage). The optimized SNEDDS formulation was evaluated for the self-emulsifying time (32 s), droplet size (35 nm), and zeta potential (−8 mV). In vitro dissolution studies indicated a 3.1-fold improvement in drug solubility from the optimized SNEDDS over pure drug powder. After 60 min of in vitro lipolysis, 88% of the voxelotor loaded in the SNEDDS remained in the aqueous phase. Cytotoxicity evaluation, using Caco-2 cells, indicated the safety of the formulation at 0.9 mg/mL. The transport of the voxelotor SNEDDS across Caco-2 monolayers was significantly enhanced compared to that of the free drug. Compared to the drug suspension, the developed SNEDDS enhanced the oral bioavailability (1.7-fold) of voxelotor in rats. The results suggest that further development of SNEDDSs for the oral delivery of voxelotor is needed.

Optimization of self-emulsifying drug delivery system of cefuroxime axetil

Abstract Overcoming solubility problems is the greatest challenge during formulation of poorly soluble active pharmaceutical ingredients (API’s) into oral solid dosage forms. Different formulation approaches were used to surpass this problem and enhance their solubility in the gastrointestinal (GI) fluids, in order to achieve a faster dissolution and better absorption, which will directly influence their therapeutic effect. In this paper, an evaluation of the potential of a self-emulsifying drug delivery system (SEDDS) to improve the solubility of the active ingredient cefuroxime axetil (CA) was done. Screening of the solubility of the API in different excipients was done, and Tween 80, PEG 400, and Olive oil as a surfactant, co-solvent, and oil, respectively, were chosen as the most convenient system constituents. An optimal self-emulsification and solubilization ability of this system was assessed using mixture experimental design statistical tools based on the response surface methodology (RSM). The prepared CA-SEDDS were evaluated for droplet size (d10, d50, d90 in µm), droplet size distribution (Span factor), and absorbance. As a complementary approach, for better representation of the non-linear relationship between the formulation compositions and the observed dispersion characteristics an artificial neural network (ANN) was used. Optimal formulation that consists of 10% (w/w) Tween 80 as surfactant, 80% (w/w) PEG 400 as co-solvent and 10% (w/w) Olive oil, was obtained. Both, mixture experimental design and ANN were combined for a comprehensive evaluation of CA-SEDDS and the obtained results suggested that formulation of SEDDS is a useful approach for improving the solubility of the CA. Keywords: self-emulsifying drug delivery systems (SEDDS), cefuroxime axetil, design of experiment, artificial neural network (ANN)

Design of Non-Haemolytic Nanoemulsions for Intravenous Administration of Hydrophobic APIs

Among advanced formulation strategies, nanoemulsions are considered useful drug-delivery systems allowing to improve the solubility and the bioavailability of lipophilic drugs. To select safe excipients for nanoemulsion formulation and to discard any haemolytic potential, an in vitro miniaturized test was performed on human whole blood. From haemolysis results obtained on eighteen of the most commonly used excipients, a medium chain triglyceride, a surfactant, and a solubilizer were selected for formulation assays. Based on a design of experiments and a ternary diagram, the feasibility of nanoemulsions was determined. The composition was defined to produce monodisperse nanodroplets with a diameter of either 50 or 120 nm, and their physicochemical properties were optimized to be suitable for intravenous administration. These nanoemulsions, stable over 21 days in storage conditions, were shown to be able to encapsulate with high encapsulation efficiency and high drug loading, up to 16% (w/w), two water practically insoluble drug models: ibuprofen and fenofibrate. Both drugs may be released according to a modulable profile in sink conditions. Such nanoemulsions appear as a very promising and attractive strategy for the efficient early preclinical development of hydrophobic drugs.

Solid Self-Emulsifying Drug Delivery System (Solid SEDDS) for Testosterone Undecanoate: In Vitro and In Vivo Evaluation

OBJECTIVE

The current study aimed to investigate the potential of Solid Self-Emulsifying Drug Delivery Systems (solid SEDDS) loaded with Testosterone Undecanoate (TU) (solid TUSEDDS). The solid TU-SEDDS was composed of TU, Medium-Chain Triglycerides (MCT, oil), 2- Chloro-1-(chloromethyl) ethyl carbamate (EL-35, surfactant) and polyethylene glycol (PEG400, cosurfactant). It was expected to improve the dissolution and oral bioavailability of TU, as a result of investigating the feasibility of the clinical application of SEDDS.

METHODS

First, a TU-SEDDS was developed by using rational blends of components with the good solubilizing ability for TU. Next, a ternary phase diagram was constructed to determine the self-emulsifying region, and the formulation was optimized. Then, the solid TU-SEDDS formulation was established by screening suitable solid adsorptions. Finally, the prepared SEDDS, TUSEDDS and solid TU-SEDDS formulations were evaluated in vitro and in vivo.

RESULTS

The size of the solid TU-SEDDS was 189.1 ± 0.23 nm. The Transmission Electron Microscopy (TEM) results showed that the oil droplets were homogenous and spherical with good integrity. The Differential Scanning Calorimetry (DSC) and X-Ray Powder Dffraction (XRD) results indicated that the solid TU-SEDDS formulation almost preserves the amorphous state. Scanning Electron Microscopy (SEM) indicated that neusilin US2 successfully adsorbed the TU-SEDDS. Drug release indicated that the dissolution of the solid TU-SEDDS was faster than that of Andriol Testocaps ®. Furthermore, in vivo pharmacokinetic (PK) studies in Sprague-Dawley (SD) rats showed that the Area Under the Curve (AUC) of the solid TU-SEDDS (487.54±208.80 μg/L×h) was higher than that of Andriol Testocaps® (418.93±273.52 μg/L×h, P < 0.05). In beagles not fed a high-fat diet, the AUC of the solid TU-SEDDS (5.81±4.03 μg/L×h) was higher than that of Andriol Testocaps ® (5.53±3.43 μg/L×h, P > 0.05). In beagles fed a high-fat diet, the AUC of the solid TUSEDDS (38.18±21.90 μg/L×h) was higher than that of Andriol Testocaps® (37.17±13.79 μg/L×h, P > 0.05).

CONCLUSION

According to the results of this research, oral solid TU-SEDDS is expected to be another alternative delivery system for the late-onset hypogonadism. This is beneficial to the transformation of existing drug delivery systems into preclinical and clinical studies.

Preparation and Characterization of Fenofibrate-Loaded PVP Electrospun Microfibrous Sheets

Fenofibrate-loaded electrospun microfibrous sheets were prepared in an attempt to enhance the dissolution of the poorly soluble antihyperlipidemic agent and to improve its bioavailability. Physicochemical changes that appeared during the electrospinning process were monitored using a wide array of solid-state characterization techniques, including attenuated total reflectance Fourier-transformed infrared spectroscopy and positron annihilation lifetime spectroscopy, while fiber morphology was monitored via scanning electron microscopy. Dissolution studies carried out both in 0.025 M sodium dodecyl sulfate and in water revealed an immediate release of the active agent, with an approximately 40-fold release rate enhancement in water when compared to the micronized active agent. The dramatic increase in dissolution was attributed partially to the amorphous form of the originally crystalline active agent and the rapid disintegration of the electrospun microfibrous sheet due to its high surface area and porosity. The obtained results could pave the way for a formulation of the frequently used antihyperlipidemic agent with increased bioavailability.

Self-nanoemulsifying drug delivery system to improve transcorneal permeability of voriconazole: in-vivo studies

OBJECTIVE

This study investigates the effectiveness of self-nanoemulsifying drug delivery system (SNEDDS) in improving voriconazole transcorneal permeability.

METHODS

Voriconazole-SNEDDS was prepared with isopropyl myristate, PEG 400, Tween 80^® and Span 80^® and was subjected for physicochemical characterization after reconstitution with NaCl 0.9% (1/9; v/v). In-vitro antifungal activity was assessed and compared with the marketed formulation. In-vivo studies, namely ocular irritation test via modified Draize test and pharmacokinetic study, were investigated using rabbit as animal model.

KEY FINDINGS

Voriconazole-SNEDDS presented a droplet size of 21.353 ± 0.065 nm, a polydispersity index of 0.123 ± 0.003, a pH of 7.205 ± 0.006 and an osmolarity of 342.667 ± 2.517 mOsmol/l after reconstitution with NaCl 0.9%. Voriconazole-SNEDDS minimum inhibitory concentration (MIC₉₀ ) was similar to the one of marketed formulation for Candida species while it was significantly lower (P < 0.001) for Aspergillus fumigatus. Draize test revealed that Voriconazole-SNEDDS was safe for ocular administration. Voriconazole maximum concentration (5.577 ± 0.852 µg/ml) from SNEDDS was higher than marketed formulation (C_max  = 4.307 ± 0.623 µg/ml), and the T_max was delayed to 2 h. The area under the concentration-time curve value of Voriconazole-SNEDDS was improved by 2.419-fold.

CONCLUSION

Our results suggest that SNEDDS is a promising carrier for voriconazole ocular delivery and this encourages further clinical studies.

Voriconazole-loaded self-nanoemulsifying drug delivery system (SNEDDS) to improve transcorneal permeability

The aim of this study was to develop self- nanoemulsifying drug delivery system (SNEDDS) to improve the transcorneal permeability of voriconazole. A 'mixture design around a reference mixture' approach was applied. This latter included four components, namely, isopropyl myristate, PEG 400, Tween^® 80 and Span^® 80 as oil, co-solvent, surfactant and co-surfactant, respectively. Droplet size was selected as response. The effect of mixture components on droplet size was analyzed by means of response trace method. Optimal formulation was subjected to stability studies and characterized for droplet size, polydispersity index (PDI), pH, osmolarity, viscosity and percentage of transmittance. Ex-vivo transcorneal permeation of the optimal and the marketed formulations was carried out on excised bovine cornea using Franz cell diffusion apparatus. Optimal voriconazole loaded-SNEDDS showed moderate emulsification efficiency and was characterized by a droplet size of 21.447 ± 0.081 nm, a PDI of 0.156 ± 0.004, a pH of 7.205 ± 0.006, an osmolarity of 310 mosmol/Kg and a viscosity of 8.818 ± 0.076 cP. Moreover, it presented an excellent stability and exhibited a significant improvement (p < 0.05) in apparent permeability coefficient (1.982 ± 0.187 × 10^-6cm/s) when compared to commercialized formulation (1.165 ± 0.106 × 10^-6cm/s). These results suggest that SNEDDS is a promising carrier for voriconazole ocular delivery.

The Role of Self-Nanoemulsifying Drug Delivery Systems of CDODA-Me in Sensitizing Erlotinib-Resistant Non-Small Cell Lung Cancer

We have investigated the effects of combination treatment involving ERL (erlotinib) with a glycyrrhetinic acid analog, CDODA-Me in overcoming ERL resistance, providing efforts to improve the oral bioavailability of this treatment using self-nanoemulsifying drug delivery systems (SNEDDS). A Qbd (quality-by-design) approach was used to prepare CDMS (CDODA-SNEDDS, 2 μΜ), which was characterized using surface response methodology to optimize drug content, particle size, and drug release. CDMS/ERL combinations showed synergism in wild-type and resistant H1975 and HCC827 cell lines with combination index values less than 1. Increased apoptosis, mitochondrial membrane potential depletion, and enhanced intracellular ROS levels were also observed in combination therapy. Western blot analysis showed that combination therapy inhibited phosphorylation of epidermal growth factor receptor (EGFR) (p < 0.01 in all cell lines) and Met receptor tyrosine kinase (MET) (p < 0.01 in all cell lines). In vivo, the relative bioavailability of CDMS increased significantly from 22.13 to 151.76 μg/mL compared to the dosing of oral suspension (dose equivalent). Our results demonstrate that combination therapy involving ERL and CDODA-Me overcomes resistance through dual inhibition of p-EGFR and p-MET leading to the induction of apoptosis, intracellular ROS accumulation, and decreased mitochondrial potential. Furthermore, CDMS improved the oral bioavailability of CDODA-Me.

Self-Nanoemulsifying Drug Delivery System of Tetrandrine for Improved Bioavailability: Physicochemical Characterization and Pharmacokinetic Study

The main purpose of this study was to investigate the potential of self-nanoemulsified drug delivery system (SNEDDS) to improve the oral bioavailability of tetrandrine (Tet). SNEDDS was developed by using rational blends of excipients with good solubilizing ability for Tet which was selected based on solubility studies. Further ternary phase diagram was constructed to determine the self-emulsifying region. The optimal formulation with the best self-nanoemulsified and solubilization ability consisted of 40% (w/w) oleic acid as oil, 15% (w/w) SPC and 30% (w/w) Cremophor RH-40 as surfactant, and 15% (w/w) PEG₄₀₀ as cosurfactant. The average droplet size and zeta-potential of the optimal Tet SNEDDS were 19.75±0.37 nm and 1.87±0.26 mv, respectively. The dissolute rate of Tet SNEDDS in various dissolution media was remarkably faster than Tet commercial tablet. Moreover, in vivo pharmacokinetic study results show that significant increase (p≤ 0.05) in the peak concentration (Cmax) and the area under the curve (AUC) of Tet was observed after the oral administration of Tet SNEDDS and the absorption of Tet from SNEDDS resulted in approximately 2.33-fold increase in oral bioavailability compared with the commercial tablet. Our research suggests that the prepared Tet SNEDDS could be a good candidate for improved the dissolution and oral bioavailability of Tet.

Physico-chemical characterization of self-emulsifying drug delivery systems

Self-emulsifying drug delivery systems (SEDDS) are regarded as a potential implement for oral delivery of water insoluble APIs to overcome their poor and irregular bioavailability. The correlation between the physicochemical parameters and the behavior of self-emulsifying drug delivery systems was established. The objective of this study was to summarize these physicochemical factors characterized SEDDS. Determination of self-emulsification process and ternary phase diagram are the basis of preparations. The position of APIs in SEDDS inclusion can be determined by dye solubilisation test. The end point of self-emulsification was controlled by turbimetric evaluation. Optimisation of droplet size and zeta potential are crucial parameters because they can influence i.e. the dissolution rate of APIs and the stability of SEDDS. Besides the basic methods in the characterization of SEDDS such as dispersibility tests, turbidimetric evaluation, viscosity tests, determinations with complex instruments such as photon correlation spectroscopy or dynamic light-scattering, electro kinetic potential measurement, non-destructive spectroscopic techniques (LFDS, FTIR, RS) and various microscopic techniques (SEM, PLM, EDS) has also been described.

Measuring the emulsification dynamics and stability of self-emulsifying drug delivery systems

Self-emulsifying drug delivery systems (SEDDS) are one of the most promising technologies in the drug delivery field, particularly for addressing solubility and bioavailability issues of drugs. The development of these drug carriers excessively relies in visual observations and indirect determinations. The present manuscript intended to describe a method able to measure the emulsification of SEDDS, both micro and nano-emulsions, able to measure the droplet size and to evaluate the physical stability of these formulations. Additionally, a new process to evaluate the physical stability of SEDDS after emulsification was also proposed, based on a cycle of mechanical stress followed by a resting period. The use of a multiparameter continuous evaluation during the emulsification process and stability was of upmost value to understand SEDDS emulsification process. Based on this method, SEDDS were classified as fast and slow emulsifiers. Moreover, emulsification process and stabilization of emulsion was subject of several considerations regarding the composition of SEDDS as major factor that affects stability to physical stress and the use of multicomponent with different properties to develop a stable and robust SEDDS formulation. Drug loading level is herein suggested to impact droplets size of SEDDS after dispersion and SEDDS stability to stress conditions. The proposed protocol allows an online measurement of SEDDS droplet size during emulsification and a rationale selection of excipients based on its emulsification and stabilization performance.

Self-emulsification of Lipidic Drug Delivery System in Pure Water and in Concentrated Glycerol Solution

Self-emulsifying drug delivery systems (SEDDS), often intended for oral delivery, are normally explored in biorelevant aqueous media. The high complexity of these multi-component systems leaves the understanding of self-emulsification poor, hindering formulation rationalization. In this work, we aimed to fill this gap by studying the effects of glycerol on the self-emulsification of a ternary component formulation made of 20% w/w Tween 80, 15% w/w Span 80, and 65% w/w Captex 300 Low C6. The behavior of SEDDS in pure water and a binary mixture of water and glycerol (58.8% w/w) were investigated by optical microscopy, SAXS (small angle X-ray scattering), dynamic light scattering, and surface tension measurements. The presence of glycerol, at 58.8% w/w, altered the self-emulsification behavior by suppressing the formation of lamellar structures observed in the presence of water, reducing the droplet mean diameter from 0.2 to 0.1 μm and changing the mechanism of self-emulsification. As co-surfactant, glycerol may intercalate within the polyoxyethylene chains of the surfactant at the palisade layer, increasing the interface flexibility and expanding it. Since no free water is available at the investigated glycerol concentration, glycerol, which is also a co-solvent, may additionally modify long-range interactions by reducing Van-der-Waals attractions or giving rise to repulsive surface-solvent mediated forces of entropic origin. These effects could be exploited to rationalize SEDDS formulations, widening their use within the pharmaceutical industry.

Oxidative stress prediction: A preliminary approach using a response surface based technique

A response surface was built to predict the lipid peroxidation level, generated in an iron-ascorbate in vitro model, of any organ, which is correlated with the oxidative stress injury in biological membranes. Oxidative stress studies are numerous, usually performed on laboratory animals. However, ethical concerns require validated methods to reduce the use of laboratory animals. The response surface described here is a validated method to replace animals. Tissue samples of rabbit liver, kidney, heart, skeletal muscle and brain were oxidized with different concentrations of FeCl₃ (0.1 to 8mM) and ascorbate (0.1mM), during different periods of time (0 to 90min) at 37°C. Experimental data obtained, with lipid content and antioxidant activity of each organ, allowed constructing a multidimensional surface capable of predicting, by interpolation, the lipid peroxidation level of any organ defined by its antioxidant activity and fat content, when exposed to different oxidant conditions. To check the predictive potential of the technique, two more experiments were carried out. First, in vitro oxidation data from lung tissue were collected. Second, the antioxidant capacity of kidney homogenates was modified by adding melatonin. Then, the response surface generated could predict lipid peroxidation levels produced in these new situations. The potential of this technique could be reinforced using collaborative databases to reduce the number of animals in experimental procedures.

Exploring experimental fitness landscapes for chemical synthesis and property optimization

The topology of experimental fitness landscapes for chemical optimization objectives is assessed through svr-based HDMR modeling.

Fenofibrate nanoliposome: Preparation and its inhibitory effects on nonalcoholic fatty liver disease in mice

The aim was to prepare fenofibrate nanoliposome (FNB-Nanolipo) and investigate its characterizations, oral pharmacokinetic (PK) profiles as well as preventive and therapeutic effects on nonalcoholic fatty liver disease (NAFLD) induced by a methionine choline deficient (MCD) diet in mice. The prepared FNB-Nanolipo showed high drug loading capacity and sustained in vitro FNB release profile. Compared to FNB crude drug at equal doses, the FNB-Nanolipo given at 20 mg/kg/day (beginning on the same day when the MCD diet feeding started and lasted for 7 days) or 40 mg/kg/day (beginning after 7 days of the MCD diet feeding and lasting for another 7 days together with the MCD diet) increased plasma FNB concentration of the mice by 11.8-fold (P<0.05) or 57.3-fold (P<0.001), respectively, and reduced 54.7% (P<0.05) or 35.5% (P<0.05) of excessive hepatic lipid, respectively. The results suggest that the FNB-Nanolipo could not only significantly prevent but also efficiently treat NAFLD.

Aprepitant loaded solid preconcentrated microemulsion for enhanced bioavailability: A comparison with micronized Aprepitant

Aprepitant (APT) is a lipophilic, poorly water soluble drug with moderate permeability characteristic. Therefore, we aimed to improve solubility as well as permeability that could possibly improve oral bioavailability of APT. For this purpose, Quality by design (QbD) approach employing simplex lattice mixture design was used to prepare solid preconcentrated microemulsion (S-PCM). Further, the software generated numerically optimized S-PCM formulations were developed by utilizing desirability function. The spectral attributes (powder X-ray diffraction, ATR-FTIR, and differential scanning calorimetry) of S-PCM formulations suggested that APT was present in amorphous form. The results of droplet size (150-180 nm), zeta potential (-13 to -15 mV), poly dispersity index (PDI) (0.211-0.238) and emulsification time (<1 min), of these S-PCM formulations (SP1, SP2 and SP3) suggested spherical shape morphology (Transmission electron microscopy) with thermodynamic stability. The comparison of in vitro/ex vivo behavior of S-PCM (SP1) with micronized and non-micronized formulations of APT suggested 2-fold and 5-fold enhancement in solubility and permeability, respectively. This was further evident from pharmacokinetic studies in rabbits that showed 1.5-fold enhancement in bioavailability of S-PCM with respect to micronized APT. Thus, it could be envisaged that development of S-PCM formulation of APT is the best alternative to micronization technology based APT formulations reported earlier.

Self-emulsifying drug delivery system developed by the HLB-RSM approach: Characterization by transmission electron microscopy and pharmacokinetic study

Recently, we developed a new approach to rationalize an optimized design for self-emulsifying drug delivery system (SEDDS) by introducing the HLB and the response surface as determinant factors in SEDDS development. The aim of this current paper is to assess the suitability of this HLB-RSM approach to enhance the oral bioavailability of BCS class II compounds using fenofibrate as drug model. Eight SEDDS formulations (I→VIII) were pre-selected regarding their self-emulsification capacity and their effect on increasing in vitro drug release. They were firstly evaluated for their thermodynamic stability and zeta potential. Unstable SEDDS were discarded meanwhile the structural morphology of the stable ones (I, VI and VIII) was characterized using transmission electron microscopy (TEM). A pharmacokinetic study was then undertaken on male BALB/cJRj mices. The in vivo results showed a significant increase of fenofibrate absorption for all the three stable SEDDS formulations compared to the commercialized form, (LIPANTHYL micronized(®) (p<0.05)). The highest enhancement was recorded for SEDDS I, where AUC and Cmax values respectively increased by 2 and 4.4 folds. This justifies the fact that HLB-RSM approach could be considered as a promising method for the development of efficient and highly stable SEDDS aiming to increase the poor bioavailability of BCS class II molecules.

Optimization of a PGSS (particles from gas saturated solutions) process for a fenofibrate lipid-based solid dispersion formulation

The aim of this study was to develop a formulation containing fenofibrate and Gelucire(®) 50/13 (Gattefossé, France) in order to improve the oral bioavailability of the drug. Particles from gas saturated solutions (PGSS) process was chosen for investigation as a manufacturing process for producing a solid dispersion. The PGSS process was optimized according to the in vitro drug dissolution profile obtained using a biphasic dissolution test. Using a design of experiments approach, the effects of nine experimental parameters were investigated using a PGSS apparatus provided by Separex(®) (Champigneulles, France). Within the chosen experimental conditions, the screening results showed that the drug loading level, the autoclave temperature and pressure, the connection temperature and the nozzle diameter had a significant influence on the dissolution profile of fenofibrate. During the optimization step, the three most relevant parameters were optimized using a central composite design, while other factors remained fixed. In this way, we were able to identify the optimal production conditions that would deliver the highest level of fenofibrate in the organic phase at the end of the dissolution test. The closeness between the measured and the predicted optimal dissolution profiles in the organic phase demonstrated the validity of the statistical analyses.