Linolenic acid-modified PEG-PCL micelles for curcumin delivery

Amphiphilic hydroxyethyl starch-based nanoparticles carrying linoleic acid modified berberine inhibit the expression of krasv12 oncogene in zebrafish

Cancer is one of the most lethal diseases all over the world. Despite that many drugs have been developed for cancer therapy, they still suffer from various limitations including poor treating efficacy, toxicity to normal human cells, and the emergence of multidrug resistance. In this study, the amphiphilic LHES polymers were prepared using hydroxyethyl starch (HES) and linoleic acid as starting materials. The content and substitution degree of linoleic acid groups in LHES polymers were analyzed. The LHES polymers were used for fabricating LHES-B nanoparticles carrying a linoleic acid modified berberine derivative (L-BBR). The LHES-B nanoparticles showed high drug loading efficiency (29%) and could quickly release L-BBR under acidic pH condition (pH = 4.5). Biological investigations revealed that LHES-B nanoparticles significantly inhibited the proliferation of HepG2 cells and exhibited higher cytotoxicity than L-BBR. In a transgenic Tg(fabp10:rtTA2s-M2; TRE2:EGFP-krasv12) zebrafish model, LHES-B nanoparticles obviously inhibited the expression of krasv12 oncogene. These results indicated that LHES carriers could improve the anticancer activity of L-BBR, and the synthesized LHES-B nanoparticles showed great potential as anticancer drug.

The synthesis and development of poly(ε-caprolactone) conjugated polyoxyethylene sorbitan oleate-based micelles for curcumin drug release: an in vitro study on breast cancer cells

BACKGROUND

it is now known that curcumin (Cur) has a broad range of biological properties; however, photosensitivity, as well as low bioavailability and short half-life, have limited its clinical application. To overcome these problems the synthesis of poly(ε-caprolactone)-Tween 80 (PCL-T) copolymers was performed.

METHODS

the copolymers of PCL-T were created using the solvent evaporation/extraction technique. Then Cur was loaded in PCL-T micelles (PCL-T-M) by a self-assembly method. The characterization of copolymer and micelles was assessed by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1HNMR), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and dynamic light scattering (DLS) methods. The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay was used to indicate the cytotoxicity of the free Cur, PCL-T-M, and Cur-loaded PCL-T-M.

RESULTS

TEM analysis showed monodispersed and spherical shapes with a size of about 90 nm. Cur was released from PCL-T-M at pH 7.4 (45%) and 5.5 (90%) during 6 days. After 24 and 48 h, the IC50 of the free Cur, PCL-T-M, and Cur-loaded PCL-T-M on MCF-7 cells were 80.86 and 54.45 μg mL-1, 278.30 and 236.19 μg mL-1, 45.47 and 19.05 μg mL-1, respectively.

CONCLUSION

this study showed that, in the same concentration, the effectiveness of the Cur-loaded PCL-T-M is more than the free Cur, and the nano-system has been able to overcome delivery obstacles of Cur drug. Thus, PCL-T-M can be a candidate as a drug carrier for the delivery of Cur and future therapeutic investigations on breast cancer.

5-fluorouracil-caffeic acid cocrystal delivery agent with long-term and synergistic high-performance antitumor effects

Aim: To explore how to transform cocrystals of the anticancer drug 5-fluorouracil (FL) with caffeic acid (CF; FL-CF-2H₂O) into a nanoformulation, a self-assembly strategy of cocrystal-loaded micelles is proposed. Methods: Nanomicelles were assembled to deliver cocrystal FL-CF-2H₂O with synergistic activity, and their in vitro/vivo properties were evaluated by combining theoretical and experimental methods. Result: More cocrystal was packed into the polymers due to the stronger interaction energy during micellar assembly, producing excellent cytotoxicity and pharmacokinetic behavior, especially synergistic abilities and long-term therapy. Conclusion: This case exemplifies the particular benefits of the self-assembly strategy of cocrystal-loaded micelles in keeping a delicate balance between long-term effects and high efficiency for FL, and offers a feasible technical scheme for cocrystal delivery agents for antitumor drugs.

Characterization and Evaluation of Rapamycin-Loaded Nano-Micelle Ophthalmic Solution

Rapamycin-loaded nano-micelle ophthalmic solution (RAPA-NM) offers a promising application for preventing corneal allograft rejection; however, RAPA-NM has not yet been fully characterized. This study aimed to evaluate the physicochemical properties, biocompatibility, and underlying mechanism of RAPA-NM in inhibiting corneal allograft rejection. An optimized RAPA-NM was successfully prepared using a polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol (PVCL-PVA-PEG) graft copolymer as the excipient at a PVCL-PVA-PEG/RAPA weight ratio of 18:1. This formulation exhibited high encapsulation efficiency (99.25 ± 0.55%), small micelle size (64.42 ± 1.18 nm), uniform size distribution (polydispersity index = 0.076 ± 0.016), and a zeta potential of 1.67 ± 0.93 mV. The storage stability test showed that RAPA-NM could be stored steadily for 12 weeks. RAPA-NM also displayed satisfactory cytocompatibility and high membrane permeability. Moreover, topical administration of RAPA-NM could effectively prevent corneal allograft rejection. Mechanistically, a transcriptomic analysis revealed that several immune- and inflammation-related Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were significantly enriched in the downregulated genes in the RAPA-NM-treated allografts compared with the rejected allogenic corneal grafts. Taken together, these findings highlight the potential of RAPA-NM in treating corneal allograft rejection and other ocular inflammatory diseases.

Supercritical CO2 versus water as an antisolvent in the crystallization process to enhance dissolution rate of curcumin

Antisolvent crystallization approach using either water (in conventional crystallization process (WAS)), or supercritical CO₂ (in supercritical anti-solvent crystallization (SCAS)), was employed in presence of hydroxypropyl methylcellulose (HPMC) to enhance the dissolution of curcumin. The impact of pressure, temperature and depressurization time on the SCAS process was studied using the Box-Behnken design to achieve the highest saturation solubility. A physical mixture of curcumin-HPMC was prepared for comparison purposes. Saturation solubility, scanning electron microscopy, differential scanning calorimetry, X-ray diffraction analysis and Fourier transform infrared spectroscopy were conducted to characterize the solid-state characteristics of the crystallized samples. Dissolution studies helped in ascertaining the effects of the crystallization techniques on the performance of the formulation. Curcumin crystalized by different antisolvent displayed varied shapes, sizes, saturation solubility's and dissolution properties. In SCAS process, the maximum saturation solubility (2.83 µg/mL) was obtained when the pressure, temperature and depressurization time were 275 bars, 55 °C, and 22 min respectively. The SCAS samples showed the highest dissolution (70%) in 30 min compared to WAS (27%), physical mixture (18%) and unprocessed curcumin (16%). The improved dissolution rate of SCAS sample originates from the development of sponge-like particles with augmented porosity, decreased crystallinity as well as increased solubility of curcumin.

Design and synthesis of new trimethoxylphenyl-linked combretastatin analogues loaded on diamond nanoparticles as a panel for ameliorated solubility and antiproliferative activity

A new series of vinyl amide-, imidazolone-, and triazinone-linked combretastatin A-4 analogues have been designed and synthesised. These compounds have been evaluated for their cytotoxic activity against MDA-MB-231 breast cancer cells. The triazinone-linked combretastatin analogues (6 and 12) exhibited the most potent cytotoxic activity, in sub-micromolar concentration compared with combretastatin A-4 as a reference standard. The results of β-tubulin polymerisation inhibition assay appear to correlate well with the ability to inhibit β-tubulin polymerisation. Additionally, these compounds were subjected to biological assays relating to cell cycle aspects and apoptosis induction. In addition, the most potent compound 6 was loaded on PEG-PCL modified diamond nanoparticles (PEG-PCL-NDs) and F4 was picked as the optimum formula. F4 exhibited enhanced solubility and release over the drug suspension. In the comparative cytotoxic activity, PEG-PCL modified F4 was capable of diminishing the IC50 by around 2.89 times for nude F4, while by 3.48 times relative to non-formulated compound 6.

The theranostic potentialities of bioavailable nanocurcumin in oral cancer management

BACKGROUND

Oral cancer, one of the most common cancers, has unimproved 5-years survival rate in the last 30 years and the chemo/radiotherapy-associated morbidity. Therefore, intervention strategies that evade harmful side effects of the conventional treatment modalities are of need. Herbal therapy as a complementary preventive/therapeutic modality has gained attention. Curcumin is one of the herbal compounds possessing unique anticancer activity and luminescent optical properties. However, its low water solubility limits its efficacy. In contrast, curcumin at the nanoscale shows altered physical properties with enhancing bioavailability.

METHODS

The current study evaluated the impact of nanocurcumin as an anti-oral cancer herbal remedy, comparing its efficacy against the native curcumin complement and conventional chemotherapeutic. An optimized polymeric-stabilized nanocurcumin was synthesized using the solvent-antisolvent precipitation technique. After assuring the solubility and biocompatibility of nanocurcumin, we determined its cytotoxic dose in treating the squamous cell carcinoma cell line. We then evaluated the anti-tumorigenic activity of the nano-herb in inhibiting wound closure and the cytological alterations of the treated cancer cells. Furthermore, the cellular uptake of the nanocurcumin was assessed depending on its autofluorescence.

RESULTS

The hydrophilic optimized nanocurcumin has a potent cancerous cytotoxicity at a lower dose (60.8 µg/mL) than the native curcumin particles (212.4 µg/mL) that precipitated on high doses hindering their cellular uptake. Moreover, the nanocurcumin showed differential targeting of the cancer cells over the normal fibroblasts with a selectivity index of 4.5. With the confocal microscopy, the luminescent nanoparticles showed gradual nuclear and cytoplasmic uptake with apparent apoptotic cell death, over the fluorescent doxorubicin with its necrotic effect. Furthermore, the nanocurcumin superiorly inhibited the migration of cancer cells by -25%.

CONCLUSIONS

The bioavailable nanocurcumin has better apoptotic cytotoxicity. Moreover, its superior luminescence promotes the theranostic potentialities of the nano-herb combating oral cancer.

Utility of Intravenous Curcumin Nanodelivery Systems for Improving In Vivo Pharmacokinetics and Anticancer Pharmacodynamics

Curcumin nanoformulations for intravenous injection have been developed to offset poor absorption, biotransformation, degradation, and excessive clearance associated with parenteral delivery. This review investigates (1) whether intravenous nanoformulations improve curcumin pharmacokinetics (PK) and (2) whether improved PK yields greater therapeutic efficacy. Standard PK parameters (measured maximum concentration [C_max], area under the curve [AUC], distribution volume [V_d], and clearance [CL]) of intravenously administered free curcumin in mice and rats were sourced from literature and compared to curcumin formulated in nanoparticles, micelles, and liposomes. The studies that also featured analysis of pharmacodynamics (PD) in murine cancer models were used to determine whether improved PK of nanoencapsulated curcumin resulted in improved PD. The distribution and clearance of free and nanoformulated curcumin were very fast, typically accounting for >80% curcumin elimination from plasma within 60 min. Case-matched analysis demonstrated that curcumin nanoencapsulation generally improved curcumin PK in terms of measured C_max (n = 27) and AUC (n = 33), and to a lesser extent V_d and CL. However, when the data were unpaired and clustered for comparative analysis, only 5 out of the 12 analyzed nanoformulations maintained a higher relative curcumin concentration in plasma over time compared to free curcumin. Quantitative analysis of the mean plasma concentration of free curcumin versus nanoformulated curcumin did not reveal an overall marked improvement in curcumin PK. No correlation was found between PK and PD, suggesting that augmentation of the systemic presence of curcumin does not necessarily lead to greater therapeutic efficacy.

Poly(N-vinylcaprolactam) containing solid lipid polymer hybrid nanoparticles for controlled delivery of a hydrophilic drug gemcitabine hydrochloride

Folic acid tagged and hydrophilic polymer containing solid lipid nanoparticles (SLNs) were formulated for the controlled and targeted delivery of gemcitabine, a hydrophilic drug. Drug loaded SLNs were prepared by double emulsion method and optimized by 3² level factorial design. Then, a hydrophilic polymer, namely, poly(N-vinylcaprolactam) (PVCL) was incorporated in the optimized SLN batch in the first aqueous phase (W1) to obtain solid lipid polymer hybrid nanoparticles (SLPHNs) that were further decorated with folic acid (F-SLPHNs). TEM analysis of SLNs and SLPHNs revealed the spherical shape with no aggregation while SLPHNs showed higher % EE. SLPHNs exhibited limited burst release of gemcitabine compared to SLNs as well as lower overall % release. All the formulations showed good cytocompatibility against MDA-MB-231 cell lines and folic acid-tagged hybrid particles (F-SLPHNs) showed remarkably higher cellular uptake.

A hydrophilic polymer, poly(N-vinylcaprolactam), incorporated into solid lipid nanoparticles (SLNs) imparts better encapsulation and controlled release of gemcitabine.

Carbopol 940 hydrogel containing curcumin-loaded micelles for skin delivery and application in inflammation treatment and wound healing

Inflammation and excessive reactive oxygen species production are main reason for slow wound healing, which needs an efficient therapy in clinic. In the paper, curcumin-enveloped methoxy poly(ethylene glycol)-poly(-valerolactone)-poly(-caprolactone) (MPEG-PVL-PCL) micelles...

Long-Term Release of Dexamethasone With a Polycaprolactone-Coated Electrode Alleviates Fibrosis in Cochlear Implantation

Cochlear implantation (CI) is the major treatment for severe sensorineural hearing loss. However, the fibrotic tissue forming around the electrodes reduces the treatment effectiveness of CI. Dexamethasone (DEX) is usually applied routinely in perioperative treatment of cochlear implantation (CI), but its diffusion in the inner ear after systemic administration is limited. In the present study, an electrode coated with polycaprolactone (PCL) loaded with dexamethasone was developed with a simple preparation process to maintain the stability of the electrode itself. The DEX-loaded PCL coating has good biocompatibility and does not change the smoothness, flexibility, or compliance of the implant electrode. Stable and effective DEX concentrations were maintained for more than 9 months. Compared with the pristine electrode, decreasing intracochlear fibrosis, protection of hair cells and spiral ganglion cells, and better residual hearing were observed 5 weeks after PCL-DEX electrode implantation. The PCL-DEX electrode has great potential in preventing hearing loss and fibrosis by regulating macrophages and inhibiting the expression of the fibrosis-related factors IL-1β, TNF-α, IL-4, and TGF-β1. In conclusion, the PCL-DEX electrode coating shows promising application in CI surgery.

Increased antitumor efficacy of ginsenoside Rh2 via mixed micelles: in vivo and in vitro evaluation

The aim of this work is to apply Solutol^® HS15 and TPGS to prepare self-assembled micelles loading with ginsenoside Rh₂ to increase the solubility of ginsenoside Rh₂, hence, improving the antitumor efficacy. Ginsenoside Rh₂-mixed micelles (Rh₂-M) were prepared by thin film dispersion method. The optimal Rh₂-M was characterized by particle size, morphology, and drug encapsulation efficiency. The enhancement of in vivo anti-tumor efficacy of Rh₂-M was evaluated by nude mice bearing tumor model. The solubility of Rh₂ in self-assembled micelles was increased approximately 150-folds compared to free Rh₂. In vitro results demonstrated that the particle size of Rh₂-M is 74.72 ± 2.63 nm(PDI = 0.147 ± 0.15), and the morphology of Rh₂-M is spherical or spheroid, and the EE% and LE% are 95.27 ± 1.26% and 7.68 ± 1.34%, respectively. The results of in vitro cell uptake and in vivo imaging showed that Rh₂-M could not only increase the cell uptake of drugs, but also transport drug to tumor sites, prolonging the retention time. In vitro cytotoxicity and in vivo antitumor results showed that the anti-tumor effect of Rh₂ can be effectively improved by Rh₂-M. Therefore, Solutol^® HS15 and TPGS could be used to entrapping Rh₂ into micelles, enhancing solubility and antitumor efficacy.

Polymeric micelles of a copolymer composed of all-trans retinoic acid, methoxy-poly(ethylene glycol), and b-poly(N-(2 hydroxypropyl) methacrylamide) as a doxorubicin-delivery platform and for combination chemotherapy in breast cancer

Delivery of combination chemotherapeutic agents to the tumor via nanovesicles has the potential for superior tumor suppression and reduced toxicity. Herein, we prepare a block copolymer (mPH-RA) composed of methoxy-poly(ethylene glycol) (mPEG), b-poly(N-(2 hydroxypropyl) methacrylamide) (pHPMA), and all-trans retinoic acid (ATRA) by conjugating ATRA to the pre-formed copolymer, mPEG-b-pHPMA(mP-b-pH). Doxorubicin-loaded micelles, Dox@mP-b-pH, and Dox@mPH-RA were characterized by determining particle size, zeta potential, % DL, EE, Dox release, hemolysis study, and by DSC. The Dox@mPH-RA micelles (mPH-RA: Dox ratios of 10:0.5-2) displayed nano-size (36-45 nm), EE. 26-74%, and DL. 2.9-5.6%. Dox@mPH-RA micelles displayed the highest penetrability and cytotoxicity than free Dox and Dox@mP-b-pH micelles in breast cancer cell lines. Dox@mPH-RA exhibited the highest induction of apoptosis (94.1 ± 3%) than Dox (52.1 ± 4.5%), and Dox@mP-b-pH (81.7 ± 3%), and arrested cells in the highest population in G2 and S phase. Dox@mPH-RA increased the t_1/2 and C_max of Dox and demonstrated improved therapeutic efficacy and highest Dox distribution to the tumor. The Dox@mPH-RA increased the levels of apoptosis markers, caspase 3, 7, Ki-67, and caused the highest DNA fragmentation. The presence of RA improved the micelles' physicochemical properties, Dox-loading ability, and the therapeutic potential in Dox@mPH-RA via the combination therapeutic strategy.

Phospholipid-Conjugated PEG-b-PCL Copolymers as Precursors of Micellar Vehicles for Amphotericin B

Amphotericin B (AmB) is a widely used antifungal that presents a broad action spectrum and few reports on the development of resistance. However, AmB is highly toxic, causing renal failure in a considerable number of treated patients. Although when AmB is transported via polymer micelles (PMs) as delivery vehicles its nephrotoxicity has been successfully attenuated, this type of nanoparticle has limitations, such as low encapsulation capacity and poor stability in aqueous media. In this research, the effect of modifying polyethyleglicol-block-poly(ε-caprolactone) (PEG-b-PCL) with 1,2-distearoyl-sn-glycero-3-phosphorylethanolamine (DSPE) on the performance of PMs as vehicles for AmB was studied. PEG-b-PCL with two different lengths of a PCL segment was prepared via ring opening polymerisation and modified with DSPE at a post-synthesis stage through amidation. Upon modification with DSPE, a copolymer was self-assembled, thereby producing particles with hydrodynamic diameters below 100 nm and a lower critical micelle concentration than that of the raw copolymers. Likewise, in the presence of DSPE, the loading capacity of AmB increased because of the formed intermolecular interactions, such as hydrogen bonds, which also caused a lower aggregation of this drug. The assessment of in vitro toxicity against red blood cells indicated that the toxicity of AmB decreased upon encapsulation; however, its antifungal action against clinical yeasts was maintained and enhanced, as indicated by a decrease in its minimum inhibitory concentration.

Development of physical, mechanical, antibacterial and cell growth properties of poly(glycerol sebacate urethane) (PGSU) with helping of curcumin and hydroxyapatite nanoparticles

Biocompatible and antimicrobial elastomers with controlled hydrophilicity and degradation rate, as well as appropriate stiffness and elasticity, are interesting for biomedical applications, such as regenerative medicine and tissue engineering.

Versatile role of curcumin and its derivatives in lung cancer therapy

Lung cancer is a main cause of death all over the world with a high incidence rate. Metastasis into neighboring and distant tissues as well as resistance of cancer cells to chemotherapy demand novel strategies in lung cancer therapy. Curcumin is a naturally occurring nutraceutical compound derived from Curcuma longa (turmeric) that has great pharmacological effects, such as anti-inflammatory, neuroprotective, and antidiabetic. The excellent antitumor activity of curcumin has led to its extensive application in the treatment of various cancers. In the present review, we describe the antitumor activity of curcumin against lung cancer. Curcumin affects different molecular pathways such as vascular endothelial growth factors, nuclear factor-κB (NF-κB), mammalian target of rapamycin, PI3/Akt, microRNAs, and long noncoding RNAs in treatment of lung cancer. Curcumin also can induce autophagy, apoptosis, and cell cycle arrest to reduce the viability and proliferation of lung cancer cells. Notably, curcumin supplementation sensitizes cancer cells to chemotherapy and enhances chemotherapy-mediated apoptosis. Curcumin can elevate the efficacy of radiotherapy in lung cancer therapy by targeting various signaling pathways, such as epidermal growth factor receptor and NF-κB. Curcumin-loaded nanocarriers enhance the bioavailability, cellular uptake, and antitumor activity of curcumin. The aforementioned effects are comprehensively discussed in the current review to further direct studies for applying curcumin in lung cancer therapy.

pH-Responsive Micelles From an Oleic Acid Tail and Propionic Acid Heads Dendritic Amphiphile for the Delivery of Antibiotics

The aim of this study was to synthesize a novel biocompatible pH-responsive oleic acid-based dendritic lipid amphiphile (OLA-SPDA) which self-assembled into stable micelles (OLA-SPDA -micelles) with a relatively low critical micelle concentration (CMC) of 5.6 × 10^-6 M. The formulated micelles had particle size, polydispersity index (PDI) and zeta potential (ZP) of 84.16 ± 0.184 nm, 0.199 ± 0.011 and -42.6 ± 1.98 mV, respectively, at pH 7.4. The vancomycin (VCM) encapsulation efficiency was 78.80 ± 3.26%. The micelles demonstrated pH-responsiveness with an increase in particle size to 141.1 ± 0.0707 nm and a much faster release profile at pH 6.0, as compared to pH 7.4. The minimum inhibitory concentration (MIC) of VCM-OLA-SPDA-micelle against methicillin-resistant staphylococcus aureus (MRSA) was 8-fold lower compared to bare VCM, and the formulation had a 4-fold lower MIC at pH 6.0 when compared to the formulation's MIC at pH 7.4. MRSA viability assay showed the micelles had a percentage killing of 93.39% when compared bare-VCM (58.21%) at the same MIC (0.98 μg/mL). In vivo mice (BALB/c) skin infection models showed an 8-fold reduction in MRSA burden after treatment with VCM-OLA-SPDA-micelles when compared with bare VCM. The above results suggest that pH-responsive VCM-OLA-SPDA-micelles has the potential to be an effective carrier to enhance therapeutic outcomes against infections characterised by low pH.

Co-Loaded Curcumin and Methotrexate Nanocapsules Enhance Cytotoxicity against Non-Small-Cell Lung Cancer Cells

Background: As part of the efforts to find natural alternatives for cancer treatment and to overcome the barriers of cellular resistance to chemotherapeutic agents, polymeric nanocapsules containing curcumin and/or methotrexate were prepared by an interfacial deposition of preformed polymer method. Methods: Physicochemical properties, drug release experiments and in vitro cytotoxicity of these nanocapsules were performed against the Calu-3 lung cancer cell line. Results: The colloidal suspensions of nanocapsules showed suitable size (287 to 325 nm), negative charge (-33 to -41 mV) and high encapsulation efficiency (82.4 to 99.4%). Spherical particles at nanoscale dimensions were observed by scanning electron microscopy. X-ray diffraction analysis indicated that nanocapsules exhibited a non-crystalline pattern with a remarkable decrease of crystalline peaks of the raw materials. Fourier-transform infrared spectra demonstrated no chemical bond between the drug(s) and polymers. Drug release experiments evidenced a controlled release pattern with no burst effect for nanocapsules containing curcumin and/or methotrexate. The nanoformulation containing curcumin and methotrexate (NCUR/MTX-2) statistically decreased the cell viability of Calu-3. The fluorescence and morphological analyses presented a predominance of early apoptosis and late apoptosis as the main death mechanisms for Calu-3. Conclusions: Curcumin and methotrexate co-loaded nanocapsules can be further used as a novel therapeutic strategy for treating non-small-cell lung cancer.

Linolenic acid-modified MPEG-PEI micelles for encapsulation of amphotericin B

Aim: To encapsulate amphotericin B (AmB) with reduced toxicity and comparable activity. Results & methodology: The α-linolenic acid (ALA)-modified monomethoxy polyethylene glycol-g-PEI-g-ALA conjugate was employed to prepare AmB-loaded micelles (AmB-M). In vitro activity and release behavior of AmB-M were investigated. AmB-M enhanced AmB's water-solubility to 1.2 mg/ml, showing good storage stability. AmB-M could achieve a sustained and slow release of AmB, low hemolysis activity and negligible kidney toxicity when compared with commercial AmB injection. Antifungal activity and biofilm inhibition experiments confirmed that the antifungal activity of AmB-M against Candida albicans was similar to that of AmB injection. Conclusion: Monomethoxy polyethylene glycol-g-PEI-g-ALA micelles could be a preferable choice to treat systemic fungal infections as an efficient drug delivery system.

α-Linolenic acid-modified pluronic 127-CS copolymeric micelles for the skin targeted delivery of amphotericin B

In this study, an α-linolenic acid modified pluronic F127-block-chitosan (F127-(CS-LNA)₂) copolymer was synthesized to prepare topical amphotericin B (AMB)-loaded micelles (AMB-M) via a dialysis technique.

Crucial successes in drug delivery systems using multivariate chemometric approaches: challenges and opportunities

Applying multivariate chemometric methods for thorough investigation of three processes in drug delivery systems: loading, release and photo-degradation.

Diosgenin-conjugated PCL–MPEG polymeric nanoparticles for the co-delivery of anticancer drugs: design, optimization, in vitro drug release and evaluation of anticancer activity

In this study, a polymeric nanoparticle-mediated dual anti-cancer drug delivery system was designed and developed.

Anti-Cancerous Potential of Polyphenol-Loaded Polymeric Nanotherapeutics

Recent evidence has extensively demonstrated the anticancer potential of nutraceuticals, including plant polyphenols. Polymeric nanocarrier systems have played an important role in improving the physicochemical and pharmacological properties of polyphenols, thus ameliorating their therapeutic effectiveness. This article summarizes the benefits and shortcomings of various polymeric systems developed for the delivery of polyphenols in cancer therapy and reveals some ideas for future work.

Fabrication of magnetic nanochains linked with CTX and curcumin for dual modal imaging detection and limitation of early tumour

OBJECTIVE

Five-year survival rate at early lung tumour was about 70%; however, its early diagnosis rate was still at a low level, so the enhancement of diagnosis level for early lung tumour is the key factor to increase the survival rate. Diagnosis and therapy of early lung tumour are still challenged.

METHODS

The magnetic nanochains (NCs) with biocompatibility and transverse relaxivity (r₂  = 231 Fe mmol l^-1  s^-1 ) were fabricated through a co-precipitation method in the assistance of dextran, and then, linked with chlorotoxin (CTX) and curcumin (Cur) via the PEGylation and carbodiimide technique (named as CTX-NCs-Cur).

RESULTS

The results of cell test indicated that CTX-conjugated NCs could obviously target non-small-cell lung cancer cells and limit their growth. The in vivo results of magnetic resonance imaging and fluorescence imaging indicated that the CTX-NCs-Cur significantly targeted the tumour site and enhanced images contrast of the small-size tumour. Moreover, the results of everyday tail-vein injection confirmed that CTX-NCs-Cur could significantly limit the growth of early tumour, due to blocking Cl ion channels from CTX-NCs-Cur-MMP-2 composite and intracellular ROS increase from Cur treatment.

CONCLUSIONS

We provided a mechanism about the effect of CTX-NCs-Cur on the targeting and limiting early tumour, and these results indicated the application foreground of CTX-NCs-Cur in tumour diagnosis and therapy.

MPEG-PCL Copolymeric Micelles for Encapsulation of Azithromycin

Macrolide antibiotics are lipophilic drugs with some limitations including low solubility, limited cellular permeation, patients discomfort, etc. With amphiphilic methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) (MPEG-PCL) copolymer and azithromycin (AZT) as drug carrier and model drug, AZT-loaded micelles were prepared via thin-membrane hydration method in order to overcome these limitations. Encapsulation efficiency of AZT-loaded micelles was 94.40% with good storage stability for 28 days, and AZT's water solubility was enhanced to 944 μg/mL. Fourier transform infrared spectrum and x-ray diffraction analysis indicated that AZT was enveloped into the micelles in amorphous form due to its interaction with the copolymer. AZT's in vitro release from the AZT-loaded micelles demonstrated a slow and continuous behavior when compared with raw AZT. The release dynamics was accorded with Weibull equation, meaning that release amount of AZT lowered with time and was proportional to remaining amount of drug in the AZT-loaded micelles. Korsmeyer-Peppas fitting result suggested that drug release process was a classical Fickian diffusion-controlled manner. With Staphylococcus aureus as bacterial strain, antibacterial activity of the AZT-loaded micelles displayed was comparable with raw AZT. In conclusion, MPEG-PCL should be a promising carrier for macrolide antibiotic delivery in treatment of bacterial infections.

Immunomodulatory activities of curcumin-stabilized silver nanoparticles: Efficacy as an antiretroviral therapeutic

We synthesized and characterized curcumin-stabilized silver nanoparticles (Cur-AgNP) and found them to be 45 nm by dynamic light scattering with a maximum absorbance at 406 nm. We evaluated Cur-AgNP for immunomodulatory activities and their potential as an antiretroviral agent. The antiretroviral effects of Cur-AgNP were determined in ACH-2 cells latently infected with human immunodeficiency virus (HIV)-1. ACH-2 cells, 200,000/ml, were treated with Cur-AgNP for 24-48 h. Expression of HIV-1 LTR and p24, the pro-inflammatory cytokines, IL-1β, TNF-α, and NF-κB was quantitated. Treatment of ACH-2 cells latently infected with HIV-1 with Cur-AgNP produced no toxic effects but significantly inhibited the expression of HIV-1 LTR (-73%, P < 0.01) and p24 (-57%, P < 0.05), IL-1βα (-61%, P < 0.01), TNF-αα (-54%, P < 0.05), IL-6 (-68%, P < 0.01), and NF-κB (-79%, P < 0.0001) as compared to untreated controls. Thus, Cur-AgNP have therapeutic potential as direct antiretroviral agents, as well as having immunomodulatory activities inhibiting the expression of pro-inflammatory mediators induced by infection with HIV-1. Experimental controls, such as curcumin alone, and conventional silver nanoparticles capped with citric acid, produced no similar biological effects. We conclude that treatment of HIV-1 infected cells with Cur-AgNP significantly reduced replication of HIV by inhibition of NF-κB nuclear translocation and the downstream expression of the pro-inflammatory cytokines IL-1β, TNF-α, and IL-6. Subsequent in vivo studies with Cur-AgNP using a humanized mouse model of HIV infection are underway.

Augmentation of therapeutic potential of curcumin using nanotechnology: current perspectives

Curcumin, an active principle of Curcuma longa, is extracted from the rhizome. Its therapeutic efficiency has been proved using various in vitro and in vivo models. Inflammatory, neoplastic and preneoplastic diseases are the major targets using curcumin as therapeutic agent. Feasible clinical formulations could not be obtained because of its lack of solubility, stability and higher degradation rate. Recently, many techniques have been evolved to improve the physicochemical properties of pharmacological compounds, thereby increasing their biological activity. Curcumin has been developed using various techniques, particularly micro and nanotechnology to improve its stability and bioavailability. This review focuses on the studies pertaining to the delivery of curcumin in the form of micro and nanosize formulations for the treatment of a variety of diseases.

Cholesterol and vitamin E-conjugated PEGylated polymeric micelles for efficient delivery and enhanced anticancer activity of curcumin: evaluation in 2D monolayers and 3D spheroids

A newly synthesized PEGylated cholesterol/α-tocopheryl succinate (α-TOS) linked polymer (CV) was self-assembled and loaded with curcumin to form a micellar system (C-CVM). The tri-functionalized amphiphilic polymer was constituted of hydrophobic cholesterol and α-TOS connected to hydrophilic PEG via a lysine linker. The synthesized polymer and the micelles were characterized by ¹H NMR, DLS, zeta potentiometer, TEM, CMC determination and hemolysis studies. CVM displayed low CMC value of 15 µM with extent of hemolysis as less than 4%. The stable C-CVM with optimum % drug loading (14.2 ± 0.24) displayed Z average of 175.8 ± 0.68 nm with PDI (0.248 ± 0.075) and released curcumin in sustained manner in the in vitro drug release study. C-CVM demonstrated dose-dependent cellular uptake and cytotoxicity in murine melanoma, B16F10 and human breast cancer, MDA-MB-231 cell lines. CV exhibited marked reversal of drug resistance as indicated by significantly higher retention of P-glycoprotein substrate, rhodamine-123 in the resistant B16F10 cell line compared to standard P-glycoprotein inhibitor, verapamil. C-CVM demonstrated significantly higher spheroidal growth inhibition compared to C-PPM. The results provide strong evidence for CVM as promising drug delivery system and confirm the potential of C-CVM as chemotherapy in cancer.

Targeted delivery of ginsenoside compound K using TPGS/PEG-PCL mixed micelles for effective treatment of lung cancer

Ginsenoside compound K (CK) is one of the effective ingredients in antitumor composition of ginsenoside. However, the poor water solubility and significant efflux have limited the widespread clinical use of CK. In this study, preparation of novel CK-loaded d-alpha-tocopheryl polyethylene glycol 1,000 succinate/poly(ethylene glycol)-poly(ε-caprolactone) mixed micelles (CK-M) is discussed to solve the above problems. Particle size, zeta potential, and morphology were characterized using dynamic light scattering and transmission electron microscopy. CK-M are spherical shaped with an average particle size of 53.07±1.31 nm with high drug loading of 11.19%±0.87% and entrapment efficiency of 94.60%±1.45%. Water solubility of CK was improved to 3.78±0.09 mg/mL, which was ~107.35 times higher than free CK. A549 and PC-9 cells were used to evaluate in vitro cytotoxicity and cellular uptake. IC₅₀ values of CK-M in A549 and PC-9 cells (24 h) were 25.43±2.18 and 18.35±1.90 μg/mL, respectively. Enhanced cellular uptake of CK-M was observed in both cells. Moreover, CK-M promoted tumor cell apoptosis, inhibited tumor cell invasion, metastasis, and efflux through regulation of Bax, Bcl-2, matrix metalloproteinase-2, Caspase-3, and P-glycoprotein. In vivo imaging indicated that CK-M has excellent tumor targeting effect within 24 h, and the relative tumor inhibition rate of CK-M was 52.04%±4.62% compared with control group (P<0.01). Thus, CK-M could be an appropriate delivery agent for enhanced solubility and antitumor effect of CK.

Intracellular "activated" two-photon photodynamic therapy by fluorescent conveyor and photosensitizer co-encapsulating pH-responsive micelles against breast cancer

The application of photodynamic therapy (PDT) for the diagnosis and treatment of cancer is hindered by the intrinsic defects of the currently available photosensitizers (PSs), such as poor water solubility and limited light-penetration depth. In this study, pH-responsive polymeric micelles that co-encapsulate therapeutic PSs and organooxotin two-photon compounds were applied for two-photon PDT (TP-PDT) against breast cancer. The TP-PDT effect of the drug-loaded micelles was “activated” when the micelles turned into aggregates at a triggering pH level. The in vitro therapeutic effect was evaluated on 4T1 murine breast cancer cells by viability assays, real-time morphology collapsing, and reactive oxygen species determination. Time-dependent ex vivo organ distribution and in vivo anticancer efficacy results suggested that the drug carriers could accumulate in tumors and suppress tumor growth by TP-PDT. The delivery system could enhance the solubility and distribution of PSs and, if administered along with a tissue-penetrating prolonged light source, could thus have good potential for cancer therapy.

Curcumin-loaded chitosan–cholesterol micelles: evaluation in monolayers and 3D cancer spheroid model

Aim: To improve the bioavailability and anticancer potential of curcumin by using a cholesterol-conjugated chitosan micelle. Methods & methods: Cholesterol was conjugated to chitosan (15 kDa) to form self-assembled micelles, which loaded curcumin. Physicochemical characterization and formulation optimization of the drug-loaded micelles (curcumin-loaded chitosan–cholesterol micelles [C-CCM]) were performed. In vitro cellular uptake and viability of C-CCM were investigated in melanoma and breast cancer cell lines. The antitumor efficacy was evaluated in 3D lung cancer spheroid model. Results & conclusion: The optimized C-CCM had size of approximately 162 nm with loading efficiency of approximately 36%. C-CCM was taken up efficiently by the cells, and it reduced cancer cell viability significantly compared with free curcumin. C-CCM enhanced the antitumor efficacy in spheroids, suggesting that C-CCM could be used as an effective chemotherapy in cancer.

d-α-Tocopheryl Succinate/Phosphatidyl Ethanolamine Conjugated Amphiphilic Polymer-Based Nanomicellar System for the Efficient Delivery of Curcumin and To Overcome Multiple Drug Resistance in Cancer

Nanomedicines have emerged as a promising treatment strategy for cancer. Multiple drug resistance due to overexpression of various drug efflux transporters and upregulation of apoptotic inhibitory pathways in cancer cells are major barriers that limit the success of chemotherapy. Here, we developed a d-α-tocopherol (α-TOS)/lipid-based copolymeric nanomicellar system (VPM) by conjugating phosphatidyl ethanolamine (PE) and α-TOS with poly(ethylene glycol) (PEG) via an amino acid linkage. The synthesized polymers were characterized by Fourier transform IR, gas-phase chromatography, and ¹H and ¹³C NMR spectroscopy. VPM exhibited mean hydrodynamic diameter of 141.0 ± 0.94 nm with low critical micelles concentrations (CMC) of 15 μM compared to plain PEG-PE micelles (PPM) with size of 23.9 ± 0.34 nm and CMC 20 μM. The bigger hydrophobic compartment in VPM resulted in improved loading of a potent chemotherapeutic drug, curcumin (Cur), and increased encapsulation efficiency (EE) (% drug loading 98.3 ± 1.92, and 85.3 ± 3.29; EE 14.8 ± 0.16 and 12.8 ± 0.09 for VPM and PPM, respectively). Curcumin loaded Vitamin E based micelles exhibited higher cytotoxicity compared to Curcumin loaded PEG-PE micelles in tested cancer cell lines. C-VPM demonstrated ∼3.2 and ∼2.7-fold higher ability to reverse multiple drug resistance compared to PPM and verapamil (concentration used 30 μM), respectively. In the in vivo study by using B16F10 implanted C57Bl6/J mice, C-VPM reduced the tumor volume and weight more efficiently than C-PPM by inducing apoptosis as analyzed by TUNEL assay on tumor cryosections. The newly developed polymeric micelles, VPM with improved drug loadability and ability to reverse the drug resistance could successfully be utilized as a nanocarrier system for hydrophobic chemotherapeutic agents for the treatment of drug-resistant solid tumors.

Polyphenols delivery by polymeric materials: challenges in cancer treatment

Nanotechnology can offer different solutions for enhancing the therapeutic efficiency of polyphenols, a class of natural products widely explored for a potential applicability for the treatment of different diseases including cancer. While possessing interesting anticancer properties, polyphenols suffer from low stability and unfavorable pharmacokinetics, and thus suitable carriers are required when planning a therapeutic protocol. In the present review, an overview of the different strategies based on polymeric materials is presented, with the aim to highlight the strengths and the weaknesses of each approach and offer a platform of ideas for researchers working in the field.

In vitro characterization of pH-sensitive azithromycin-loaded methoxy poly (ethylene glycol)-block-poly (aspartic acid-graft-imidazole) micelles

In order to improve azithromycin's antibacterial activity in acidic medium, monomethoxy poly (ethylene glycol)-block-poly (aspartic acid-graft-imidazole) copolymer was synthesized through allylation, free radical addition, ring-opening polymerization and amidation reactions with methoxy poly (ethylene glycol) as raw material. Drug loading capacity and encapsulation efficiency of azithromycin-loaded micelles prepared via thin film hydration method were 11.58±0.86% and 96.06±1.93%, respectively. The drug-loaded micelles showed pH-dependent property in the respects of particle size, zeta potential at the range of pH 5.5-7.8. It could control drug in vitro release and demonstrate higher release rate at pH 6.0 than that at pH 7.4. In vitro antibacterial experiment indicated that the activity of azithromycin-loaded micelles against S. aureus was superior to free azithromycin in medium at both pH 6.0 and pH 7.4. Using fluorescein as substitute with pH-dependent fluorescence decrease property, laser confocal fluorescence microscopy analysis confirmed that cellular uptake of micelles was improved due to protonation of copolymer's imidazole groups at pH 6.0. The enhanced cellular uptake and release of drug caused its activity enhancement in acidic medium when compared with free drug. The micellar drug delivery system should be potential application in the field of bacterial infection treatment.