Study of sodium hyaluronate-based intranasal formulations containing micro- or nanosized meloxicam particles

Investigation of Physico-Chemical Stability and Aerodynamic Properties of Novel "Nano-in-Micro" Structured Dry Powder Inhaler System

Pulmonary drug transport has numerous benefits. Large surface areas for absorption and limited drug degradation of the gastrointestinal system are provided through the respiratory tract. The administration is painless and easy for the patient. Due to their better stability when compared to liquid formulations, powders have gained popularity among pulmonary formulations. In the pharmaceutical sector, quality assurance and product stability have drawn a lot of attention. Due to this, it was decided to perform a long-term stability study on a previously developed, nanosized dry powder inhaler (DPI) formulation that contained meloxicam. Wet milling was implemented to reduce the particle size, and nano spray-drying was used to produce the extra-fine inhalable particles. The particle diameter was determined using dynamic light scattering and laser diffraction. Scanning electron microscopy was utilized to describe the morphology. X-ray powder diffraction and differential scanning calorimetry were applied to determine the crystallinity. In an artificial lung medium, the in vitro dissolution was studied. The Andersen Cascade Impactor was used to investigate the in vitro aerodynamic characteristics. The stability test results demonstrated that the DPI formulation maintained its essential qualities after 6 and 12 months of storage. Consequently, the product might be promising for further studies and development.

Preparation and Characterization of Ibuprofen Containing Nano-Embedded-Microparticles for Pulmonary Delivery

A fatal hereditary condition, cystic fibrosis (CF) causes severe lung problems. Ibuprofen (IBU), a non-steroidal anti-inflammatory drug, slows the progression of disease without causing significant side effects. Considering the poor water-solubility of the drug, IBU nanoparticles are beneficial for local pulmonary administration. We aimed to formulate a carrier-free dry powder inhaler containing nanosized IBU. We combined high-performance ultra-sonication and nano spray-drying. IBU was dissolved in ethyl acetate; after that, it was sonicated into a polyvinyl alcohol solution, where it precipitated as nanoparticles. Mannitol and leucine were added when producing dry particles using nano-spray drying. The following investigations were implemented: dynamic light scattering, laser diffraction, surface tension measurement, scanning electron microscopy, X-ray powder diffraction, differential scanning calorimetry, Fourier-transform infrared spectroscopy, in vitro dissolution test, and in vitro aerodynamic assessment (Andersen Cascade Impactor). The particle diameter of the IBU was in the nano range. The spray-dried particles showed a spherical morphology. The drug release was rapid in artificial lung media. The products represented large fine particle fractions and proper aerodynamic diameters. We successfully created an inhalable powder, containing nano-sized IBU. Along with the exceptional aerodynamic performance, the ideal particle size, shape, and drug-release profile might offer a ground-breaking local therapy for CF.

Smartcrystals for Efficient Dissolution of Poorly Water-Soluble Meloxicam

Nanocrystal is widely applied to improve the dissolution of poorly water-soluble drugs. We aimed to prepare meloxicam (MLX) nanocrystals using the bead mill method, followed by high-pressure homogenization (HPH). Simple drying at room temperature (RD), vacuum-drying (VD), and freeze-drying (FD) using mannitol or trehalose as a cryoprotectant were applied to obtain dry nanocrystals. The nanocrystals were fully characterized. The MLX nanosuspension containing 5% w/v MLX and 1% w/v of Pluronic F68 showing a mean particle size (MPS) of 242 nm and a polydispersity index (PDI) of 0.36 was prepared after 40 min of premilling and 30 min of HPH. The dried nanocrystals were spherical within the nano range. DSC and XRPD confirmed the absence of MLX amorphization. The smartcrystals showed enhanced MLX release. Approximately 100% release was achieved with phosphate buffer (PB), pH 5.6, and 80% was released with PB, pH 7.4, from the freeze-dried samples. The results revealed the effects of the drying method and cryoprotectant type on the properties of dry nanocrystals. The freeze-dried samples showed the smallest particle size, in particular trehalose-based samples. On the other hand, mannitol-based dried samples showed the highest crystallinity index among all nanocrystals (77.8%), whereas trehalose showed the lowest (59.2%). These factors explained the dissolution differences among the samples.

Physico-Chemical, In Vitro and Ex Vivo Characterization of Meloxicam Potassium-Cyclodextrin Nanospheres

Nasal drug delivery has many beneficial properties, such as avoiding the first pass metabolism and rapid onset of action. However, the limited residence time on the mucosa and limited absorption of certain molecules make the use of various excipients necessary to achieve high bioavailability. The application of mucoadhesive polymers can increase the contact time with the nasal mucosa, and permeation enhancers can enhance the absorption of the drug. We aimed to produce nanoparticles containing meloxicam potassium (MEL-P) by spray drying intended for nasal application. Various cyclodextrins (hydroxypropyl-β-cyclodextrin, α-cyclodextrin) and biocompatible polymers (hyaluronic acid, poly(vinylalcohol)) were used as excipients to increase the permeation of the drug and to prepare mucoadhesive products. Physico-chemical, in vitro and ex vivo biopharmaceutical characterization of the formulations were performed. As a result of spray drying, mucoadhesive nanospheres (average particle size <1 µm) were prepared which contained amorphous MEL-P. Cyclodextrin-MEL-P complexes were formed and the applied excipients increased the in vitro and ex vivo permeability of MEL-P. The highest amount of MEL-P permeated from the α-cyclodextrin-based poly(vinylalcohol)-containing samples in vitro (209 μg/cm²) and ex vivo (1.47 μg/mm²) as well. After further optimization, the resulting formulations may be promising for eliciting a rapid analgesic effect through the nasal route.

Structure and Fate of Nanoparticles Designed for the Nasal Delivery of Poorly Soluble Drugs

Nanoparticles are promising mediators to enable nasal systemic and brain delivery of active compounds. However, the possibility of reaching therapeutically relevant levels of exogenous molecules in the body is strongly reliant on the ability of the nanoparticles to overcome biological barriers. In this work, three paradigmatic nanoformulations vehiculating the poorly soluble model drug simvastatin were addressed: (i) hybrid lecithin/chitosan nanoparticles (LCNs), (ii) polymeric poly-ε-caprolactone nanocapsules stabilized with the nonionic surfactant polysorbate 80 (PCL_P80), and (iii) polymeric poly-ε-caprolactone nanocapsules stabilized with a polysaccharide-based surfactant, i.e., sodium caproyl hyaluronate (PCL_SCH). The three nanosystems were investigated for their physicochemical and structural properties and for their impact on the biopharmaceutical aspects critical for nasal and nose-to-brain delivery: biocompatibility, drug release, mucoadhesion, and permeation across the nasal mucosa. All three nanoformulations were highly reproducible, with small particle size (∼200 nm), narrow size distribution (polydispersity index (PI) < 0.2), and high drug encapsulation efficiency (>97%). Nanoparticle composition, surface charge, and internal structure (multilayered, core-shell or raspberry-like, as assessed by small-angle neutron scattering, SANS) were demonstrated to have an impact on both the drug-release profile and, strikingly, its behavior at the biological interface. The interaction with the mucus layer and the kinetics and extent of transport of the drug across the excised animal nasal epithelium were modulated by nanoparticle structure and surface. In fact, all of the produced nanoparticles improved simvastatin transport across the epithelial barrier of the nasal cavity as compared to a traditional formulation. Interestingly, however, the permeation enhancement was achieved via two distinct pathways: (a) enhanced mucoadhesion for hybrid LCN accompanied by fast mucosal permeation of the model drug, or (b) mucopenetration and an improved uptake and potential transport of whole PCL_P80 and PCL_SCH nanocapsules with delayed boost of permeation across the nasal mucosa. The correlation between nanoparticle structure and its biopharmaceutical properties appears to be a pivotal point for the development of novel platforms suitable for systemic and brain delivery of pharmaceutical compounds via intranasal administration.

Comparison of Modern In Vitro Permeability Methods with the Aim of Investigation Nasal Dosage Forms

Nowadays, the intranasal route has become a reliable alternative route for drug administration to the systemic circulation or central nervous system. However, there are no official in vitro diffusion and dissolution tests especially for the investigation of nasal formulations. Our main goal was to study and compare a well-known and a lesser-known in vitro permeability investigation method, in order to ascertain which was suitable for the determination of drug permeability through the nasal mucosa from different formulations. The vertical diffusion cell (Franz cell) was compared with the horizontal diffusion model (Side-Bi-Side). Raw and nanonized meloxicam containing nasal dosage forms (spray, gel and powder) were tested and compared. It was found that the Side-Bi-Side cell was suitable for the investigation of spray and powder forms. In contrast, the gel was not measurable on the Side-Bi-Side cell; due to its high viscosity, a uniform distribution of the active substance could not be ensured in the donor phase. The Franz cell, designed for the analysis of semi-solid formulations, was desirable for the investigation of nasal gels. It can be concluded that the application of a horizontal cell is recommended for liquid and solid nasal preparations, while the vertical one should be used for semi-solid formulations.

Physico-Chemical and In Vitro Characterization of Chitosan-Based Microspheres Intended for Nasal Administration

The absorption of non-steroidal anti-inflammatory drugs (NSAIDs) through the nasal epithelium offers an innovative opportunity in the field of pain therapy. Thanks to the bonding of chitosan to the nasal mucosa and its permeability-enhancing effect, it is an excellent choice to formulate microspheres for the increase of drug bioavailability. The aim of our work includes the preparation of spray-dried cross-linked and non-cross-linked chitosan-based drug delivery systems for intranasal application, the optimization of spray-drying process parameters (inlet air temperature, pump rate), and the composition of samples. Cross-linked products were prepared by using different amounts of sodium tripolyphosphate. On top of these, the micrometric properties, the structural characteristics, the in vitro drug release, and the in vitro permeability of the products were studied. Spray-drying resulted in micronized chitosan particles (2–4 μm) regardless of the process parameters. The meloxicam (MEL)-containing microspheres showed nearly spherical habit, while MEL was present in a molecularly dispersed state. The highest dissolved (>90%) and permeated (~45 µg/cm²) MEL amount was detected from the non-cross-linked sample. Our results indicate that spray-dried MEL-containing chitosan microparticles may be recommended for the development of a novel drug delivery system to decrease acute pain or enhance analgesia by intranasal application.

Quality by Design Based Formulation Study of Meloxicam-Loaded Polymeric Micelles for Intranasal Administration

Our study aimed to develop an “ex tempore” reconstitutable, viscosity enhancer- and preservative-free meloxicam (MEL)-loaded polymeric micelle formulation, via Quality by Design (QbD) approach, exploiting the nose-to-brain pathway, as a suitable tool in the treatment of neuroinflammation. The anti-neuroinflammatory effect of nose-to-brain NSAID polymeric micelles was not studied previously, therefore its investigation is promising. Critical product parameters, encapsulation efficiency (89.4%), Z-average (101.22 ± 2.8 nm) and polydispersity index (0.149 ± 0.7) and zeta potential (−25.2 ± 0.4 mV) met the requirements of the intranasal drug delivery system (nanoDDS) and the targeted profile liquid formulation was transformed into a solid preservative-free product by freeze-drying. The viscosity (32.5 ± 0.28 mPas) and hypotonic osmolality (240 mOsmol/L) of the reconstituted formulation provides proper and enhanced absorption and probably guarantees the administration of the liquid dosage form (nasal drop and spray). The developed formulation resulted in more than 20 times faster MEL dissolution rate and five-fold higher nasal permeability compared to starting MEL. The prediction of IVIVC confirmed the great potential for in vivo brain distribution of MEL. The nose-to-brain delivery of NSAIDs such as MEL by means of nanoDDS as polymeric micelles offers an innovative opportunity to treat neuroinflammation more effectively.

Nanoparticles of Lovastatin: Design, Optimization and in vivo Evaluation

Introduction

The aim of the study was to optimize the processing factors of precipitation–ultrasonication technique to prepare nano-sized particles of Lovastatin (LA) for enhancing its solubility, dissolution rate and in vivo bioavailability.

Methods

LA nanoparticles (LANs) were prepared using precipitation–ultrasonication technique under different processing factors. LANs were characterized in terms of particle size, zeta potential and in vitro release. Stability studies at 4°C, 25°C and 40°C were conducted for optimum formulation. In addition, the in vivo bioavailability of the optimum formula was studied in comparison to a marketed product in white master rats.

Results

The optimized LAN formula (LAN15) had particle size (190±15), polydispersity index (0.626±0.11) and a zeta potential (−25±1.9 mV). The dissolution study of the nanosuspensions showed significant enhancement compared with pure drug. After 50 min, only 20.12±1.85% of LA was dissolved while 99.1±1.09% of LA was released from LAN15. Stability studies verified that nanosuspensions at 4°C and 25°C showed higher stability with no particle growth compared to the samples studied at 40°C. In vivo studies conducted in rats verified that there was 1.45-fold enhancement of C_max of LAN15 as compared to marketed tablets.

Conclusion

Nanoparticle prepared by ultrasonication-assisted precipitation method is a promising formula for enhancing the solubility and hence the bioavailability of Lovastatin.

Preparation and characterization of lamotrigine containing nanocapsules for nasal administration

Nanocapsules (NCs) have become one of the most researched nanostructured drug delivery systems due to their advantageous properties and versatility. NCs can enhance the bioavailabiliy of hydrophobic drugs by impoving their solubility and permeability. Also, they can protect these active pharmaceutical agents (APIs) from the physiological environment with preventing e.g. the enzymatic degradation. NCs can be used for many administration routes: e.g. oral, dermal, nasal and ocular formulations are exisiting in liquid and solid forms. The nose is one of the most interesting alternative drug administration route, because local, systemic and direct central nervous system (CNS) delivery can be achived; this could be utilized in the therapy of CNS diseases. Therefore, the goal of this study was to design, prepare and investigate a novel, lamotrigin containing NC formulation for nasal administration. The determination of micrometric parameters (particle size, polydispersity index, surface charge), in vitro (drug loading capacity, release and permeability investigations) and in vivo characterization of the formulations were performed in the study. The results indicate that the formulation could be a promising alternative of lamotrigine (LAM) as the NCs were around 305 nm size with high encapsulation efficiency (58.44%). Moreover, the LAM showed rapid and high release from the NCs in vitro and considerable penetration to the brain tissues was observed during the in vivo study.

Nasal delivery of nanosuspension-based mucoadhesive formulation with improved bioavailability of loratadine: Preparation, characterization, and in vivo evaluation

The unique requirements of poorly water-soluble drug delivery have driven a great deal of research into new formulations and routes of administration. This study investigates the use of nanosuspensions for solubility enhancement and drug delivery. Simple methods were used to prepare nasal formulations of loratadine based on nanosuspension pre-dispersion with sodium hyaluronate as a mucoadhesive agent. The nanosuspension was prepared by antisolvent precipitation method followed by ultrasonication and characterized for particle size, polydispersity index, zeta potential, morphology, and structure. Moreover, the nasal formulations were characterized for drug loading, pH, particle size, viscosity, bioadhesive viscosity parameter, and were evaluated for in vitro dissolution and diffusion, in addition to in vivo studies in a rat model. Loratadine nanosuspension displayed a particle size of 311 nm, a polydispersity index of 0.16, and zeta potential of -22.05 mV. The nanosuspension preserved the crystalline status of the raw drug. The addition of sodium hyaluronate exhibited an increase in the mean particle size and zeta potential of the nanoparticles. The nasal formulations showed enhanced bioadhesive properties compared to the unprocessed loratadine in the reference samples. The nanosuspension based-formulation that contained 5 mg mL^-1 sodium hyaluronate and 2.5 mg mL^-1 loratadine (NF4) showed a significant enhancement of flux and permeability coefficient through a synthetic membrane. NF4 exhibited 24.73 µg cm^-2 h^-1 and 0.082 cm h^-1, while the reference sample showed 1.49 µg cm^-2 h^-1 and 0.017 cm h^-1, for the flux and the permeability coefficient, respectively. Nasal administration of NF4 showed a bioavailability of 5.54-fold relative to the oral administration. The results obtained in this study indicate the potential of the nasal route and the nanosuspension for loratadine delivery. The relative bioavailability of NF4 was 1.84-fold compared to unprocessed loratadine in the reference sample. Therefore, the nanosized loratadine could be suggested as a practical and simple nanosystem for the intranasal delivery with improved bioavailability.

Intranasal Nanoparticulate Systems as Alternative Route of Drug Delivery

There is always a need for alternative and efficient methods of drug delivery. The nasal cavity can be considered as a non-invasive and efficient route of administration. It has been used for local, systemic, brain targeting, and vaccination delivery. Although many intranasal products are currently available on the market, the majority is used for local delivery with fewer products available for the other targets. As nanotechnology utilization in drug delivery has rapidly spread out, the nasal delivery has become attractive as a promising approach. Nanoparticulate systems facilitate drug transportation across the mucosal barrier, protect the drug from nasal enzyme degradation, enhance the delivery of vaccines to the lymphoid tissue of the nasal cavity with an adjuvant activity, and offer a way for peptide delivery into the brain and the systemic circulation, in addition to their potential for brain tumor treatment. This review article aims at discussing the potential benefit of the intranasal nanoparticulate systems, including nanosuspensions, lipid and surfactant, and polymer-based nanoparticles as regards productive intranasal delivery. The aim of this review is to focus on the topicalities of nanotechnology applications for intranasal delivery of local, systemic, brain, and vaccination purposes during the last decade, referring to the factors affecting delivery, regulatory aspects, and patient expectations. This review further identifies the benefits of applying the Quality by Design approaches (QbD) in product development. According to the reported studies on nanotechnology-based intranasal delivery, potential attention has been focused on brain targeting and vaccine delivery with promising outcomes. Despite the significant research effort in this field, nanoparticle-based products for intranasal delivery are not available. Thus, further efforts are required to promote the introduction of intranasal nanoparticulate products that can meet the requirements of regulatory affairs with high patient acceptance.

Fabrication and characterization of glimepiride nanosuspension by ultrasonication-assisted precipitation for improvement of oral bioavailability and in vitro α-glucosidase inhibition

Purpose

We aimed to enhance the solubility, dissolution rate, oral bioavailability, and α-glucosidase inhibition of glimepiride (Glm) by fabricating its nanosuspension using a precipitation-ultrasonication approach.

Methods

Glm nanosuspensions were fabricated using optimized processing conditions. Characterization of Glm was performed using Malvern Zetasizer, scanning electron microscopy, transmission electron microscopy, differential scanning calorimetry, and powder X-ray diffraction. Minimum particle size and polydispersity index (PDI) values were found to be 152.4±2.42 nm and 0.23±0.01, respectively, using hydroxypropyl methylcellulose: 6 cPs, 1% w/v, polyvinylpyrrolidone K30 1% w/v, and sodium lauryl sulfate 0.12% w/v, keeping ultrasonication power input at 400 W, with 15 minutes' processing at 3-second pauses. In vivo oral bioavailability was assessed using rabbits as a model.

Results

The saturation solubility of the Glm nanosuspensions was substantially enhanced 3.14-fold and 5.77-fold compared to unprocessed drug in stabilizer solution and unprocessed active pharmaceutical ingredient. Also, the dissolution rate of the nanosuspensions ws substantially boosted when compared to the marketed formulation and unprocessed drug candidate. The results showed that >85% of Glm nanosuspensions dissolved in the first 10 minutes compared to 10.17% of unprocessed Glm), 42.19% of microsuspensions, and 19.94% of marketed tablets. In-vivo studies conducted in animals, i.e. rabbits, demonstrated that maximum concentration and AUC_0-24 with oral dosing were twofold (5 mg/kg) and 1.74-fold (2.5 mg/kg) and 1.80-fold (5 mg/kg) and 1.63-fold (2.5 mg/kg), respectively, and compared with the unprocessed drug formulation. In-vitro α-glucosidase inhibition results showed that fabricated nanosuspensions had a pronounced effect compared to unprocessed drug.

Conclusion

The optimized batch fabricated by ultrasonication-assisted precipitation can be useful in boosting oral bioavailability, which may be accredited to enhanced solubility and dissolution rate of Glm, ultimately resulting in its faster rate of absorption due to nanonization.

Application of the QbD-based approach in the early development of liposomes for nasal administration

In this study, authors adapt the Quality by Design (QbD) concept as well as the Risk Assessment (RA) method to the early development phase of a new nano-sized liposomal formulation for nasal administration with brain target. As a model active agent, a BCS II class drug was chosen to investigate the behaviour of the drugs with lipophilic character. This research presents how to apply this risk-focused approach and concentrates on the first four stages of the QbD implementation. In this way the quality target product profile was defined, the critical factors were identified and an RA was performed. The RA results helped in the factorial design-based liposome preparation by the lipid film hydration method. The prepared liposomes were evaluated (vesicle size, size distribution, and specific surface area). The surface characteristics were also investigated to verify the exactness of the RA and critical factors based theoretical prediction. The results confirm that the QbD approach in liposome development can improve the formulation process. The RA focused predictive approach resulted in a decreased number of studies in practice but in an effective product preparation. Using such innovative design and development models can help to optimise and rationalise the development of liposomes.

Design and characterization of loratadine nanosuspension prepared by ultrasonic-assisted precipitation

Nanoparticle engineering is a well-defined technique employed as a novel and effective method in drug design and delivery. It is widely used to control particle size, as well as the morphological and physicochemical properties of active pharmaceutical ingredients. Furthermore, it serves as a method of pre-dispersion preparation for various dosage form developments. Nanotechnology produces nanomaterials with enhanced properties in terms of solubility, dissolution and permeability. In this work, ultrasonic-assisted precipitation was employed to produce nanosuspensions of poorly water-soluble loratadine, using different stabilizers. The objective of our study was attempting to prepare solid nanoparticles of loratadine to be used as a possible intermediate for designing various dosage forms. The effects of the type(s) and concentration(s) of stabilizer(s) on mean particle size were assessed. Optimal process parameters required to produce homogeneous nanoparticles with particle size below 500 nm and polydispersity less than 0.3 were determined both for precipitation and ultrasonication. Pre-dispersions were evaluated for their particle size, polydispersity index and zeta potential. Freeze-drying was employed to produce dry nanoparticles. Particle size, particle size distribution and zeta potential of the dried nanoparticles were measured after reconstitution in water. Besides thermal analysis using DSC and structural analyses (XRPD and FT-IR), the morphological characteristics and dissolution behaviors were also investigated. The selected freeze-dried nanoparticles had a mean particle size range of 353-441 nm, a polydispersity index ranging between 0.167 and 0.229 and a zeta potential between -25.7 and -20.7 mV. These results suggest that material and process parameters were successfully optimized. DSC and XRPD spectra confirmed interactions between the formulation's components during freeze-drying. The solid nanoparticles showed 30-42% of cumulative release after 10 min compared to less than 1% of dissolution characterizing loratadine without pre-processing. This study demonstrates that preparing dried loratadine nanoparticles suitable for designing effective drug preparations is a feasible approach.

Optimization of a combined wet milling process in order to produce poly(vinyl alcohol) stabilized nanosuspension

Purpose

The article reports a wet milling process, where the planetary ball mill was combined with pearl milling technology to reach nanosize range of meloxicam (Mel; 100–500 nm). The main purpose was to increase the dissolution rate and extent of a poorly water-soluble Mel as nonsteroidal anti-inflammatory drug as well as to study its permeability across cultured intestinal epithelial cell layers.

Methods

Viscosity of milled dispersion and particle size distribution and zeta potential of Mel were investigated and differential scanning calorimeter and X-ray powder diffractometer were used to analyse the structure of the suspended Mel. Finally in vitro dissolution test and in vitro cell culture studies were made.

Results

It was found that the ratio of predispersion and pearls 1:1 (w/w) resulted in the most effective grinding system (200-fold particle size reduction in one step) with optimized process parameters, 437 rpm and 43 min. Nanosuspension (1% Mel and 0.5% poly[vinyl alcohol]) as an intermediate product showed a stable system with 2 weeks of holding time. This optimized nanosuspension enhanced the penetration of Mel across cultured intestinal epithelial cell layers without toxic effects.

Conclusion

The dissolution rate of Mel from the poly(vinyl alcohol) stabilized nanosuspension justified its applicability in the design of innovative per oral dosage form (capsule) in order to ensure/give a rapid analgesia.

Modifying the physicochemical properties of NSAIDs for nasal and pulmonary administration

This review focuses on nasal and pulmonary delivery of NSAIDs (non-steroidal anti-inflammatory drugs) for fast-onset analgesia, for the potential prevention of Alzheimer's disease (AD), as well as for an add-on treatment in cystic fibrosis (CF) and non-small cell lung cancer (NSCLC). I discuss how the physicochemical properties of NSAIDs can be modified with respect to the biological characteristics of the target site. Innovative technology and/or dosage forms can promote an effective therapy.

Investigation of Absorption Routes of Meloxicam and Its Salt Form from Intranasal Delivery Systems

The aim of this article was to study the trans-epithelial absorption to reach the blood and to target the brain by axonal transport using nasal formulations with nanonized meloxicam (nano MEL spray) and its salt form known as meloxicam potassium monohydrate (MELP spray). The physicochemical properties and the mucoadhesivity of nasal formulations were controlled. In vitro and in vivo studies were carried out. These forms were first investigated in "nose-to-brain" relation. It was found that the in vitro study and in vivo study did not show any significant correlation. In vitro experiments demonstrated faster dissolution rate and higher diffusion of MELP from the spray compared with the nano MEL spray. The administration of the nano MEL spray resulted in faster absorption and constant plasma concentration of the drug after five minutes of administration as compared to MELP. The axonal transport of the drug was justified. MEL appeared in the brain tissues after the first five minutes of administration in the case of both spray forms, but its amount was too small in comparison with the total plasma concentration. The application of the nano MEL spray resulted in the same AUC in the brain as the intravenous injection. The "nose-to-blood" results predicted the nasal applicability of MEL and MELP in pain management. The "nose-to-brain" pathway requires further study.

Surface-Modified Nanocarriers for Nose-to-Brain Delivery: From Bioadhesion to Targeting

In the field of nasal drug delivery, nose-to-brain delivery is among the most fascinating applications, directly targeting the central nervous system, bypassing the blood brain barrier. Its benefits include dose lowering and direct brain distribution of potent drugs, ultimately reducing systemic side effects. Recently, nasal administration of insulin showed promising results in clinical trials for the treatment of Alzheimer’s disease. Nanomedicines could further contribute to making nose-to-brain delivery a reality. While not disregarding the need for devices enabling a formulation deposition in the nose’s upper part, surface modification of nanomedicines appears the key strategy to optimize drug delivery from the nasal cavity to the brain. In this review, nanomedicine delivery based on particle engineering exploiting surface electrostatic charges, mucoadhesive polymers, or chemical moieties targeting the nasal epithelium will be discussed and critically evaluated in relation to nose-to-brain delivery.

Preliminary study of nanonized lamotrigine containing products for nasal powder formulation

The nasal delivery of drugs offers a great alternative route to avoid adverse events and to increase patient compliance due to its advantageous properties. Besides nasal application, topical, systemic and central effects are also available. Nasal powders (NPs) have better adhesion due to the additive polymers that may be, eg, gelling or good wettability agents; thus, their bioavailability is better compared to the liquid formulations. Using nanoparticles, innovative and more efficient products can be achieved, which may lead to the improvement of different therapies. The aim of this study was to produce NP formulations containing lamotrigine (LAM) as interactive physical mixtures and nanosized LAM-based formulations. After risk assessment of the preliminary tests, the micrometric properties (particle size and morphology) and the structural properties (differential scanning calorimetry [DSC], X-ray powder diffraction [XRPD]) were investigated; thereafter, physicochemical properties (solubility, polarity) and in vitro dissolution and diffusion profiles were also examined. These product samples showed an appropriate particle size ranging 10–25 µm, while the particle size of LAM in the products was between 120 and 230 nm and the dissolved amount of drug was >60% after 5 minutes in these cases.

Development of oral lyophilisates containing meloxicam nanocrystals using QbD approach

The aim of this study was to develop oral lyophilisates with improved meloxicam (MEL) dissolution, optimizing each step of the preparation by design of experiments. First, meloxicam nanosuspensions were prepared by high-pressure homogenization (HPH), using PVP, Poloxamer or PEG as stabilizers and were subjected to freeze-drying using mannitol as cryoprotectant. The effects of the stabilizers and cryoprotectant were assessed and an optimal formulation was generated within the Design Space where the particle sizes and the PDIs are at their lowest values. The optimal formulation was used at the preparation of oral lyophilisates. Sodium alginate (SA) and croscarmellose sodium (CCS) were tested as matrix forming agents and three different freezing regimes were applied. The formulation was optimized, choosing the polymer that yielded both high mechanical strength and fast MEL dissolution. Poloxamer led to particle size reduction down to 10.27% of the initial size, meaning 477.6±7.5nm, with a slight increase during freeze-drying process. PEG showed lower nanonizing capacity during HPH, but freeze-drying produced further diminution of the particle size. Since Poloxamer provided advanced size reduction while preserving MEL crystallinity, it was used for the optimized formulation containing 1% Poloxamer and 5% mannitol added before freeze-drying. SA showed good structural properties when compared to CCS and allowed fast MEL dissolution at low ratios. The optimal formulation contained 1.157% of SA was subjected to thermal treatment during freeze-drying. It disintegrated in 3.33s and released 77.14% of the MEL after 2min. The quality by design (QbD) approach for the development of pharmaceutical products ensured high quality of the dosage form and good understanding of the preparation process.

Comparison of solvent-wetted and kneaded l-sulpiride-loaded solid dispersions: Powder characterization and in vivo evaluation

The purpose of this study was to compare the powder properties, solubility, dissolution and oral absorption of solvent-wetted (SWSD) and kneaded (KNSD) l-sulpiride-loaded solid dispersions. The SWSD and KNSD were prepared with silicon dioxide, sodium laurylsulfate and D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) using a spray dryer and high shear mixer, respectively. Their powder properties, solubility, dissolution and oral absorption were assessed compared to l-sulpiride powder. The drug in SWSD was in the amorphous state; however, in KNSD, it existed in the crystalline state. The SWSD with a drug/sodium laurylsulphate/TPGS/silicon dioxide ratio of 5/1/2/12 gave the higher drug solubility and dissolution compared to the KNSD with the same composition. The oral absorption of drug in the SWSD was 1.4 fold higher than the KNSD and 3.0 fold higher than the l-sulpiride powder (p<0.05) owing to better solubility and reduced crystallinity. Furthermore, the SWSD at the half dose was bioequivalent of commercial l-sulpiride-loaded product in rats. Thus, the SWSD with more improved oral absorption would be recommended as an alternative for the l-sulpiride-loaded oral administration.

Effect of solubility enhancement on nasal absorption of meloxicam

Besides the opioids the standard management of the World Health Organization suggests NSAIDs (non-steroidal anti-inflammatory drugs) alone or in combination to enhance analgesia in malignant and non-malignant pain therapy. The applicability of NSAIDs in a nasal formulation is a new approach in pharmaceutical technology. In order to enhance the nasal absorption of meloxicam (MX) as an NSAID, its salt form, meloxicam potassium monohydrate (MXP), registered by Egis Plc., was investigated in comparison with MX. The physico-chemical properties of the drugs (structural analysis, solubility and dissolution rate) and the mucoadhesivity of nasal formulations were controlled. In vitro and in vivo studies were carried out to determine the nasal applicability of MXP as a drug candidate in pain therapy. It can be concluded that MX and MXP demonstrated the same equilibrium solubility at the pH5.60 of the nasal mucosa (0.017mg/ml); nonetheless, MXP indicated faster dissolution and a higher permeability through the synthetic membrane. The animal studies justified the short T_max value (15min) and the high AUC of MXP, which is important in acute pain therapy. It can be assumed that the low mucoadhesivity of MXP spray did not increase the residence time in the nasal cavity, and the elimination from the nasal mucosa was therefore faster than in the case of MX. Further experiments are necessary to prove the therapeutic relevance of this MXP-containing innovative intranasal formulation.