Peptide release from SEDDS containing hydrophobic ion pair therapeutic peptides measured by Taylor dispersion analysis

Comparative Analysis of PEG-Free and PEG-Based Self-Emulsifying Drug Delivery Systems for Enhanced Oral Bioavailability of Therapeutic (Poly) Peptides

This study aims to compare the potential of Polyethylene glycol (PEG-free and PEG-based self-emulsifying drug delivery systems (SEDDS) for the oral administration of insulin glargine (IG). Hydrophobic ion pairs (HIPs) of IG are formed using various counterions. HIPs are assessed for log P octanol/water and dissociation behavior. They are incorporated into SEDDS based on polyglycerol (PG) and zwitterionic surfactant (ZW) using response surface methodology and compared to conventional PEG-SEDDS in size, stability, and log D SEDDS/release medium. Oral IG bioavailability in PG/ZW-SEDDS and PEG-SEDDS is evaluated in rats. Among the various counterions studied, IG-BIS (bis(isotridecyl)sulfosuccinate) HIPs demonstrated the highest log P and an improved dissociation profile. PG/ZW-SEDDS and PEG-SEDDS have similar ≈40 nm sizes and are stable over 24 h. Both formulations have log D > 4 in water and >2 in 50 mM phosphate buffer pH 6.8. PG/ZW-SEDDS yielded an oral bioavailability of 2.13 ± 0.66% for IG, while the employment of PEG-SEDDS resulted in an oral bioavailability of 1.15 ± 0.35%. This study highlights the prospective utilization of PEG-free SEDDS involving the concurrent application of PG and ZW surfactants, an alternative to conventional PEG surfactants, for improved oral therapeutic (poly) peptide delivery.

Lipid-based systems with precipitation inhibitors as formulation approach to improve the drug bioavailability and/or lower its dose: a review

Lipid-based systems, such as self-microemulsifying systems (SMEDDS) are attracting strong attention as a formulation approach to improve the bioavailability of poorly water-soluble drugs. By applying the "spring and parachute" strategy in designing supersaturable SMEDDS, it is possible to maintain the drug in the supersaturated state long enough to allow absorption of the complete dose, thus improving the drug's bio-availability. As such an approach allows the incorporation of larger amounts of the drug in equal or even lower volumes of SMEDDS, it also enables the production of smaller final dosage forms as well as decreased gastrointestinal irritation, being of particular importance when formulating dosage forms for children or the elderly. In this review, the technological approaches used to prolong the drug supersaturation are discussed regarding the type and concentration of polymers used in liquid and solid SMEDDS formulation. The addition of hypromellose derivatives, vinyl polymers, polyethylene glycol, polyoxyethylene, or polymetacrylate copolymers proved to be effective in inhibiting drug precipitation. Regarding the available literature, hypromellose has been the most commonly used polymeric precipitation inhibitor, added in a concentration of 5 % (m/m). However, the inhibiting ability is mainly governed not only by the physicochemical properties of the polymer but also by the API, therefore the choice of optimal precipitation inhibitor is recommended to be evaluated on an individual basis.

Self-Emulsifying Drug Delivery Systems (SEDDS) Containing Reverse Micelles: Advanced Oral Formulations for Therapeutic Peptides

Alternative methods to hydrophobic ion pairing for the formation of lipophilic complexes of peptide drugs to incorporate them in lipid-based nanocarriers such as self-emulsifying drug delivery systems (SEDDS) for oral administration are highly on demand. Such an alternative might be reverse micelles. Within this study, SEDDS containing dry reverse micelles (dRMsPMB ) formed with an anionic (sodium docusate; AOT), cationic (dimethyl-dioctadecyl-ammonium bromide; DODAB), amphoteric (soy lecithin; SL), or non-ionic (polysorbate 85; P85) surfactant loaded with the model peptide drug polymyxin B (PMB) are developed. They are characterized regarding size, payload, release kinetics, cellular uptake, and peptide activity. SEDDS exhibit sizes from 22.2 ± 1.7 (AOT-SEDDS-dRMsPMB ) to 61.7 ± 3.2 nm (P85-SEDDS-dRMsPMB ) with payloads up to 2% that are approximately sevenfold higher than those obtained via hydrophobic ion pairing. Within 6 h P85-SEDDS-dRMsPMB and AOT-SEDDS-dRMsPMB show no release of PMB in aqueous medium, whereas DODAB-SEDDS-dRMsPMB and SL-SEDDS-dRMsPMB show a sustained release. DODAB-SEDDS-dRMsPMB improves uptake by Caco-2 cells most efficiently reaching even ≈100% within 4 h followed by AOT-SEDDS-dRMsPMB with ≈20% and P85-/SL-SEDDS-dRMsPMB with ≈5%. The peptide drug maintains its antimicrobial activity in all SEDDS-dRMsPMB . According to these results, SEDDS containing dRMs might be a game changing strategy for oral peptide drug delivery.

DeepTPpred: A Deep Learning Approach With Matrix Factorization for Predicting Therapeutic Peptides by Integrating Length Information

The abuse of traditional antibiotics has led to increased resistance of bacteria and viruses. Efficient therapeutic peptide prediction is critical for peptide drug discovery. However, most of the existing methods only make effective predictions for one class of therapeutic peptides. It is worth noting that currently no predictive method considers sequence length information as a distinct feature of therapeutic peptides. In this article, a novel deep learning approach with matrix factorization for predicting therapeutic peptides (DeepTPpred) by integrating length information are proposed. The matrix factorization layer can learn the potential features of the encoded sequence through the mechanism of first compression and then restoration. And the length features of the sequence of therapeutic peptides are embedded with encoded amino acid sequences. To automatically learn therapeutic peptide predictions, these latent features are input into the neural networks with self-attention mechanism. On eight therapeutic peptide datasets, DeepTPpred achieved excellent prediction results. Based on these datasets, we first integrated eight datasets to obtain a full therapeutic peptide integration dataset. Then, we obtained two functional integration datasets based on the functional similarity of the peptides. Finally, we also conduct experiments on the latest versions of the ACP and CPP datasets. Overall, the experimental results show that our work is effective for the identification of therapeutic peptides.

Hydrophobic Ion Pairing of Small Molecules: How to Minimize Premature Drug Release from SEDDS and Reach the Absorption Membrane in Intact Form

The present work aimed to form hydrophobic ion pairs (HIPs) of a small molecule remaining inside the oily droplets of SEDDS to a high extent. HIPs of ethacridine and various surfactants classified by functional groups of phosphates, sulfates, and sulfonates were formed and precipitation efficiency, log D_{n-octanol/water}, and solubility in different excipients were investigated. Most lipophilic HIPs were incorporated into SEDDS and evaluated regarding drug release. Docusate HIPs showed the highest increase in lipophilicity with a precipitation efficiency of 100%, a log D_{n-octanol/water} of 2.66 and a solubility of 132 mg/mL in n-octanol, 123 mg/mL in oleyl alcohol, and 40 mg/mL in medium chain triglycerides. Docusate HIPs were incorporated into three SEDDS of increasing lipophilicity (F1 < F2 < F3) based on medium chain triglycerides, oleyl alcohol, Kolliphor EL, and Tween 80 (F1: 1 + 5 + 2 + 2; F2: 3 + 3 + 2 + 2; F3: 5 + 1 + 4 + 0). Highest achievable payloads ranged from 74.49 mg/mL (F3) to 97.13 mg/mL (F1) and log D_SEDDS/RM increased by at least 7.5 units (4.99, F1). Drug release studies via the diffusion membrane method confirmed minor release of docusate HIPs from all SEDDS (<2.7% within 4 h). In conclusion, highly lipophilic HIPs remain inside the oily phase of SEDDS and likely reach the absorption membrane in intact form.

Oral delivery of calcitonin-ion pairs: In vivo proof of concept for a highly lipophilic counterion

Hydrophobic ion pairing and subsequent incorporation into self-emulsifying drug delivery systems (SEDDS) is a promising strategy to orally deliver hydrophilic macromolecular drugs. Within this study, hydrophobic ion pairs (HIP) between salmon calcitonin (sCT) and highly lipophilic sulfosuccinate counterions were formed and compared to frequently applied commercially available counterions. Bis(isotridecyl) sulfosuccinate resulted in HIPs of the highest lipophilicity and in significantly higher solubility in lipophilic co-solvents. Thus, bis(isotridecyl) sulfosuccinate allowed efficient solubilization of sCT in a SEDDS preconcentrate based on a lipophilic co-solvent and an indigestible lipid, but omitting hydrophilic co-solvents. In addition to the increased solubility in the lipidic matrix, markedly reduced dissociation in biorelevant media resulted in high distribution coefficients between oil droplet and FaSSGF or FaSSIF (logD) of 2.98 ± 0.12 or 2.77 ± 0.14, respectively. The composition of the lipidic matrix preserved integrity of the oil droplets after emulsification and subsequent lipolysis, allowing to fully exploit the potential of the HIP attributed to the high logD. Oral administration of the HIP-loaded SEDDS resulted in an excellent relative pharmacological activity of 13.8 ± 5.6 % measured as hypocalcaemic effect in rats.

Assessment of hydrophobic-ion paired insulin incorporated SMEDDS for the treatment of diabetes mellitus

To overcome the low oral bioavailability of insulin, we hypothesized that the insulin-hydrophobic ion pairing (HIP) complex incorporated self-microemulsifying drug delivery system (SMEDDS) would be beneficial. In the present study, an oral insulin delivery system was developed and estimated using the HIP technique and SMEDDS. Further insulin-HIP complexes were characterized using various spectroscopical techniques. Additionally, insulin-HIP complexes were subjected to analysis of complexes' conformational stability in the real physiological solution using computational approaches. On the other hand, in vitro, and in vivo studies were carried out to investigate the permeability and hypoglycemic effect. Subsequently, in an in vitro non-everted gut sac study, the apparent permeability coefficient (P_app) was approximately 8-fold higher in the colon than in the jejunum, and the HIP-incorporated SMEDDS showed an approximately 3-fold higher P_app value than the insulin solution. The hypoglycemic effect after in situ colon instillation, the HIP complex between insulin and sodium docusate-incorporated SMEDDS showed a pharmacological availability of 2.52 ± 0.33 % compared to the subcutaneously administered insulin solution. Thus, based on these outcomes, it can be concluded that the selection of appropriate counterions is important in developing HIP-incorporated SMEDDS, wherein this system shows promise as a tool for oral peptide delivery systems.

Hydrophobic ion pairing-based self-emulsifying drug delivery systems: a new strategy for improving the therapeutic efficacy of water-soluble drugs

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are formulations consisting of oil phase, emulsifiers, and co-emulsifiers, which can be spontaneously emulsified in the body to form O/W microemulsion. Traditionally, SEDDS are used commercially for the improvement of oral absorption and in vivo performances for poorly water-soluble drugs. However, SEDDS formulations were rarely reported for the delivery of water-soluble drugs. Recent studies have found that SEDDS have the potential for water-soluble macromolecular drugs by the application of the hydrophobic ion pairing (HIP) technology.

AREAS COVERED

This review summarized the characteristics of HIP complexes in SEDDS and introduced their advantages and discussed the future prospects of HIP-based SEDDS in drug delivery.

EXPERT OPINION

Hydrophobic ion pairing (HIP) is a technology that combines lipophilic structures on polar counterions to increase the lipophilicity through electrostatic interaction. Recent studies showed that HIP-based SEDDS offer an effective way to increase the mucosal permeability and improve the chemical stability for antibiotics, proteases, DNA-based drugs, and other water-soluble macromolecular drugs. It is believed that HIP-based SEDDS offer a potential and attractive method capable of delivering hydrophilic macromolecules with ionizable groups for oral administration.

Enhanced oral absorption of insulin: hydrophobic ion pairing and a self-microemulsifying drug delivery system using a D-optimal mixture design

The lipophilicity of a peptide drug can be considerably increased by hydrophobic ion pairing with amphiphilic counterions for successful incorporation into lipid-based formulations. Herein, to enhance the oral absorption of insulin (INS), a self-microemulsifying drug delivery system (SMEDDS) formulation was developed. Prior to optimization, INS was complexed with sodium n-octadecyl sulfate (SOS) to increase the loading into the SMEDDS. The INS–SOS complex was characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and its dissociation behavior. The SMEDDS was optimized using a D-optimal mixture design with three independent variables including Capmul MCM (X₁, 9.31%), Labrasol (X₂, 49.77%), and Tetraglycol (X₃, 40.92%) and three response variables including droplet size (Y₁, 115.2 nm), INS stability (Y₂, 46.75%), and INS leakage (Y₃, 17.67%). The desirability function was 0.766, indicating excellent agreement between the predicted and experimental values. The stability of INS-SOS against gastrointestinal enzymes was noticeably improved in the SMEDDS, and the majority of INS remained in oil droplets during release. Following oral administration in diabetic rats, the optimized SMEDDS resulted in pharmacological availabilities of 3.23% (50 IU/kg) and 2.13% (100 IU/kg). Thus, the optimized SMEDDS is a good candidate for the practical development of oral delivery of peptide drugs such as INS.

Synthesis and evaluation of sulfosuccinate-based surfactants as counterions for hydrophobic ion pairing

Hydrophobic ion pairing is a promising strategy to raise the lipophilic character of therapeutic peptides and proteins. In past studies, docusate, an all-purpose surfactant with a dialkyl sulfosuccinate structure, showed highest potential as hydrophobic counterion. Being originally not purposed for hydrophobic ion pairing, it is likely still far away from the perfect counterion. Thus, within this study, docusate analogues with various linear and branched alkyl residues were synthesized to derive systematic insights into which hydrophobic tail is most advantageous for hydrophobic ion pairing, as well as to identify lead counterions that form complexes with superior hydrophobicity. The successful synthesis of the target compounds was confirmed by FT-IR, ¹H-NMR, and ¹³C-NMR. In a screening with the model protein hemoglobin, monostearyl sulfosuccinate, dioleyl sulfosuccinate, and bis(isotridecyl) sulfosuccinate were identified as lead counterions. Their potential was further evaluated with the peptides and proteins vancomycin, insulin, and horseradish peroxidase. Dioleyl sulfosuccinate and bis(isotridecyl) sulfosuccinate significantly increased the hydrophobicity of the tested peptides and proteins determined as logP or lipophilicity determined as solubility in 1-octanol, respectively, in comparison to the gold standard docusate. Dioleyl sulfosuccinate provided an up to 8.3-fold higher partition coefficient and up to 26.5-fold higher solubility in 1-octanol than docusate, whereas bis(isotridecyl) sulfosuccinate resulted in an up to 6.7-fold improvement in the partition coefficient and up to 44.0-fold higher solubility in 1-octanol. The conjugation of highly lipophilic alkyl tails to the polar sulfosuccinate head group allows the design of promising counterions for hydrophobic ion pairing. STATEMENT OF SIGNIFICANCE: Hydrophobic ion pairing enables efficient incorporation of hydrophilic molecules into lipid-based formulations by forming complexes with hydrophobic counterions. Docusate, a sulfosuccinate with two branched alkyl tails, has shown highest potential as anionic hydrophobic counterion. As it was originally not purposed for hydrophobic ion pairing, its structure is likely still far away from the perfect counterion. To improve its properties, analogues of docusate with various alkyl tails were synthesized in the present study. The investigation of different alkyl residues allowed to derive systematic insights into which tail structures are most favorable for hydrophobic ion pairing. Moreover, the lead counterions dioleyl sulfosuccinate and bis(isotridecyl) sulfosuccinate bearing highly lipophilic alkyl tails provided a significant improvement in the hydrophobicity of the resulting complexes.

Oral delivery of therapeutic peptides and proteins: Technology landscape of lipid-based nanocarriers

The oral administration of therapeutic peptides and proteins is favoured from a patient and commercial point of view. In order to reach the systemic circulation after oral administration, these drugs have to overcome numerous barriers including the enzymatic, sulfhydryl, mucus and epithelial barrier. The development of oral formulations for therapeutic peptides and proteins is therefore necessary. Among the most promising formulation approaches are lipid-based nanocarriers such as oil-in-water nanoemulsions, self-emulsifying drug delivery systems (SEDDS), solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), liposomes and micelles. As the lipophilic character of therapeutic peptides and proteins can be tremendously increased such as by the formation of hydrophobic ion pairs (HIP) with hydrophobic counter ions, they can be incorporated in the lipophilic phase of these carriers. Since gastrointestinal (GI) peptidases as well as sulfhydryl compounds such as glutathione and dietary proteins are too hydrophilic to enter the lipophilic phase of these carriers, the incorporated therapeutic peptide or protein is protected towards enzymatic degradation as well as unintended thiol/disulfide exchange reactions. Stability of lipid-based nanocarriers towards lipases can be provided by the use to excipients that are not or just poorly degraded by these enzymes. Nanocarriers with a size <200 nm and a mucoinert surface such as PEG or zwitterionic surfaces exhibit high mucus permeating properties. Having reached the underlying absorption membrane, lipid-based nanocarriers enable paracellular and lymphatic drug uptake, induce endocytosis and transcytosis or simply fuse with the cell membrane releasing their payload into the systemic circulation. Numerous in vivo studies provide evidence for the potential of these delivery systems. Within this review we provide an overview about the different barriers for oral peptide and protein delivery, highlight the progress made on lipid-based nanocarriers in order to overcome them and discuss strengths and weaknesses of these delivery systems in comparison to other technologies.

Taylor dispersion analysis in fused silica capillaries: a tutorial review

Biological and pharmaceutical analytes like liposomes, therapeutic proteins, nanoparticles, and drug-delivery systems are utilized in applications, such as pharmaceutical formulations or biomimetic models, in which controlling their size is often critical. Many of the common techniques for sizing these analytes require method development, significant sample preparation, large sample quantities, and lengthy analysis times. In other cases, such as DLS, sizing can be biased towards the largest constituents in a mixture. Therefore, there is a need for more rapid, sensitive, accurate, and straightforward analytical methods for sizing macromolecules, especially those of biological origin which may be sample-limited. Taylor dispersion analysis (TDA) is a sizing technique that requires no calibration and consumes only nL to pL sample volumes. In TDA, average diffusion coefficients are determined via the Taylor-Aris equation by characterizing band broadening of an analyte plug under well-controlled laminar flow conditions. Diffusion coefficient can then be interpreted as hydrodynamic radius (R_H) via the Stokes-Einstein equation. Here, we offer a tutorial review of TDA, intended to make the method better understood and more widely accessible to a community of analytical chemists and separations scientists who may benefit from the unique advantages of this versatile sizing method. We first provide a tutorial on the fundamental principles that allow TDA to achieve calibration-free sizing of analytes across a wide range of R_H, with an emphasis on the reduced sample consumption and analysis times that result from utilizing fused silica capillaries. We continue by highlighting relationships between operating parameters and critically important flow conditions. Our discussion continues by looking at methods for applying TDA to sample mixtures via algorithmic approaches and integration of capillary electrophoresis and TDA. Finally, we present a selection of reports that demonstrate TDA applied to complex challenges in bioanalysis and materials science.

Microfluidics and the quantification of biomolecular interactions

Microfluidic systems under laminar flow conditions provide in-solution information about species size and binding affinities at very modest sample costs. Flow-induced dispersion analysis directly measures the spread of the analyte profile using Taylor dispersion analysis, whereas microfluidic diffusional sizing quantifies the transfer of analyte from one phase to another. Species of sizes between 0.5 and 1000 nm can be analyzed, and different populations resolved. Both techniques also allow analysis in complex media and medium throughput analysis. These properties make them valuable complements to existing approaches to measure biomolecular interactions.

Solid lipid nanocarriers diffuse effectively through mucus and enter intestinal cells - but where is my peptide?

Peptides are therapeutic molecules with high potential to treat a wide variety of diseases. They are large hydrophilic compounds for which absorption is limited by the intestinal epithelial border covered by mucus. This study aimed to evaluate the potential of Hydrophobic Ion Pairing combined with Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) to improve peptide transport across the intestinal border using Caco-2 cell monolayers (enterocyte-like model) and Caco-2/HT29-MTX co-cultured monolayers (mucin-secreting model). A Hydrophobic Ion Pair (HIP) was formed between Leuprolide (LEU), a model peptide, and sodium docusate. The marked increase in peptide lipophilicity enabled high encapsulation efficiencies in both NLC (84%) and SLN (85%). After co-incubation with the nanoparticles, confocal microscopy images of the cell monolayers demonstrated particles internalization and ability to cross mucus. Flow cytometry measurements confirmed that 82% of incubated SLN and 99% of NLC were internalized by Caco-2 cells. However, LEU transport across cell monolayers was not improved by the nanocarriers. Indeed, combination of particles platelet-shape and HIP low stability in the transport medium led to LEU burst release in this environment. Improvement of peptide lipidization should maintain encapsulation and enable benefit from nanocarriers enhanced intestinal transport.

Cosolvents in Self-Emulsifying Drug Delivery Systems (SEDDS): Do They Really Solve Our Solubility Problems?

The aim of this study was to investigate the fate and the impact of cosolvents in self-emulsifying drug delivery systems (SEDDS). Three different SEDDS comprising the cosolvents DMSO (F_D), ethanol (F_E), and benzyl alcohol (F_BA) as well as the corresponding formulations without these cosolvents (F_D0, F_E0, and F_BA0) were developed. Mean droplet size, polydispersity index (PDI), ζ potential, stability, and emulsification time were determined. Cosolvent release studies were performed via the dialysis membrane method and Taylor dispersion analysis (TDA). Furthermore, the impact of cosolvent utilization on payloads in SEDDS was examined using quinine as a model drug. SEDDS with and without a cosolvent showed no significant differences in droplet size, PDI, and ζ potential. The emulsification time was 3-fold (F_D0), 80-fold (F_E0), and 7-fold (F_BA0) longer due to the absence of the cosolvents. Release studies in demineralized water provided evidence for an immediate and complete release of DMSO, ethanol, and benzyl alcohol. TDA confirmed this result. Moreover, a 1.4-fold (F_D), 2.91-fold (F_E), and 2.17-fold (F_BA) improved payload of the model drug quinine in the selected SEDDS preconcentrates was observed that dropped after emulsification within 1–5 h due to drug precipitation. In parallel, the quinine concentrations decreased until reaching the same levels of the corresponding SEDDS without cosolvents. Due to the addition of hydrophilic cosolvents, the emulsifying properties of SEDDS are strongly improved. As hydrophilic cosolvents are immediately released from SEDDS during the emulsification process, however, their drug solubilizing properties in the resulting oily droplets are very limited.

Hydrophobic ion pair loaded self-emulsifying drug delivery system (SEDDS): A novel oral drug delivery approach of cromolyn sodium for management of bronchial asthma

The aim of the present study is to develop a self-emulsifying drug delivery system (SEDDS) for the hydrophobic ion pair (HIP) complex of cromolyn sodium (CS), in order to enhance its intestinal absorption and biological activity. Two ion pairing agents (IPAs) were investigated: hexadecyl pyridininum chloride (HPC) and myristyl trimethyl ammonium bromide (MTAB). The optimum binding efficiency for complexation between investigated IPAs and CS was observed at a molar ratio of 1.5:1, where CS binding efficiency was found to be 76.10 ± 2.12 and 91.37 ± 1.73% for MTAB and HPC, respectively. The two prepared complexes exhibited a significant increase in partition coefficient indicating increased lipophilicity. The optimized CS-HIP complex was incorporated into SEDDS formulations. SEDDS formulations F2 (40% oleic acid, 40% Brij^TM98, 20% propylene glycol) and F3 (25% oleic acid, 50% Brij^TM98, 25% propylene glycol) exhibited nanometric droplet diameters with monodisperse distribution and nearly neutral zeta potential values. Ex vivo intestinal permeation study, using the non-everted gut sac technique, revealed a significantly higher cumulative amount of permeated drug, after 2 h, for F2 and F3 (53.836 and 77.617 µg/cm², respectively) compared to 8.649 µg/cm² for plain CS solution. The in vivo evaluation of plain CS solution compared to F2 and F3 was conducted in an ovalbumin sensitization-induced bronchial asthma rat model. Lung function parameters (tidal volume and peak expiratory flow), biochemical parameters (interleukin-5, immunoglobulin-E, myeloperoxidase and airway remodelling parameters) were assessed in addition to histopathological examination. The results indicated the superiority of F3 followed by F2 compared to plain CS solution for prophylaxis of bronchial asthma in rats.

Hydrophobic ion pairing (HIP) of (poly)peptide drugs: Benefits and drawbacks of different preparation methods

In order to incorporate hydrophilic macromolecular drugs into lipid-based formulations (LBF), HIP has shown great potential. In this study, different HIP methods were compared with each other. Hydrophobic complexes were formed between bovine serum albumin (BSA) and either dodecyl sulfate, cetyl trimethylammonium or 1,2-dipalmitoyl-sn-glycero-3-phosphate applying the organic solvent-free method, Bligh-Dyer method and biphasic metathesis reaction either with ethyl acetate or chloroform as organic phase. Complex formation efficiency was determined. Hydrophobicity of the obtained complexes was characterized by their apparent partition coefficient between 1-butanol and water. The highest complex formation efficiency was achieved with the Bligh-Dyer method, followed by the organic solvent-free method and the biphasic metathesis reaction. When applying the organic solvent-free method, complex formation efficiency was hampered at higher surfactant concentrations due to the formation of micelles. Furthermore, this method could only be applied for water-soluble compounds. On the contrary, the Bligh-Dyer method was robust towards high surfactant concentrations. Moreover, it enables the use of water-insoluble compounds. The rank order Bligh-Dyer method > organic solvent-free method > biphasic metathesis reaction was confirmed by the log D. According to these results, the Bligh-Dyer method appears advantageous for HIP. However, the organic-solvent free method is an adequate alternative for water-soluble compounds.

Hydrophobic ion pairing: encapsulating small molecules, peptides, and proteins into nanocarriers

Hydrophobic ion pairing has emerged as a method to modulate the solubility of charged hydrophilic molecules ranging in class from small molecules to large enzymes. Charged hydrophilic molecules are ionically paired with oppositely-charged molecules that include hydrophobic moieties; the resulting uncharged complex is water-insoluble and will precipitate in aqueous media. Here we review one of the most prominent applications of hydrophobic ion pairing: efficient encapsulation of charged hydrophilic molecules into nano-scale delivery vehicles - nanoparticles or nanocarriers. Hydrophobic complexes are formed and then encapsulated using techniques developed for poorly-water-soluble therapeutics. With this approach, researchers have reported encapsulation efficiencies up to 100% and drug loadings up to 30%. This review covers the fundamentals of hydrophobic ion pairing, including nomenclature, drug eligibility for the technique, commonly-used counterions, and drug release of encapsulated ion paired complexes. We then focus on nanoformulation techniques used in concert with hydrophobic ion pairing and note strengths and weaknesses specific to each. The penultimate section bridges hydrophobic ion pairing with the related fields of polyelectrolyte coacervation and polyelectrolyte-surfactant complexation. We then discuss the state of the art and anticipated future challenges. The review ends with comprehensive tables of reported hydrophobic ion pairing and encapsulation from the literature.

Self-emulsifying drug delivery systems: Impact of stability of hydrophobic ion pairs on drug release

The aim of this study was to evaluate the impact of stability of hydrophobic ion pairs (HIPs) in gastrointestinal (GI) fluids on their release from self-emulsifying drug delivery systems (SEDDS). HIPs of leuprolide (LEU), insulin (INS) and bovine serum albumin (BSA) were formed using various mono- and di-carboxylate surfactants i.e. sodium deoxycholate (SDC), sodium dodecanoate (SDD), sodium stearoyl glutamate (SSG) and pamoic acid di-sodium salt (PAM). HIPs were evaluated regarding precipitation efficiency, log Pn-butanol/water and dissociation behavior at various pH and ionic strength. Solubility studies of these HIPs were accomplished to identify suitable solvents for the formulation of SEDDS. Subsequently, HIPs were incorporated into SEDDS followed by characterization regarding zeta potential, stability and log DSEDDS/release medium. Independent from the type of (poly)peptides, PAM showed most efficient HIP properties among tested surfactants. The highest encapsulation efficiency with PAM was achieved at molar ratios of 1:1 for LEU, 1:3 for INS and 1:50 for BSA and log Pn-butanol/water of HIPs were increased at least 2.5 units. Dissociation studies showed that LEU-PAM, INS-PAM, BSA-PAM complexes were dissociated within 6 h up to 25%, 60% and 85% in GI fluids, respectively. These HIPs were successfully incorporated into SEDDS exhibiting negative zeta potential and high stability for 4 h. Log DSEDDS/release medium of LEU-PAM, INS-PAM, BSA-PAM complexes were 2.4 ± 0.7, 2.1 ± 0.62 and 1.6 ± 0.45, respectively. Findings of this study showed that stability of HIPs has great impact on log DSEDDS/release medium and consequently on their release from SEDDS.