Entecavir-loaded poly (lactic-co-glycolic acid) microspheres for long-term therapy of chronic hepatitis-B: Preparation and in vitro and in vivo evaluation

Injectable controlled-release systems for the prevention and treatment of infectious diseases

Pharmaceutical drugs, including vaccines, pre- and post-exposure prophylactics, and chronic drug therapies, are crucial tools in the prevention and treatment of infectious diseases. These drugs have the ability to increase survival and improve patient quality of life; however, infectious diseases still accounted for more than 10.2 million deaths in 2019 before the COVID-19 pandemic. High mortality can be, in part, attributed to challenges in the availability of adequate drugs and vaccines, limited accessibility, poor drug bioavailability, the high cost of some treatments, and low patient adherence. A majority of these factors are logistical rather than technical challenges, providing an opportunity for existing drugs and vaccines to be improved through formulation. Injectable controlled-release drug delivery systems are one class of formulations that have the potential to overcome many of these limitations by releasing their contents in a sustained manner to reduce the need for frequent re-administration and improve clinical outcomes. This review provides an overview of injectable controlled drug delivery platforms, including microparticles, nanoparticles, and injectable gels, detailing recent developments using these systems for single-injection vaccination, long-acting prophylaxis, and sustained-release treatments for infectious disease.

Prospects for Controlling Hepatitis B Globally

Infection with the hepatitis B virus (HBV) is highly prevalent globally. Over 250 million people suffer from chronic hepatitis B, and more than 800,000 patients die each year due to hepatitis B complications, including liver cancer. Although protective HBV vaccines are recommended for all newborns, global coverage is suboptimal. In adults, sexual transmission is by far the most frequent route of contagion. The WHO estimates that 1.5 million new HBV infections occur annually. Oral nucleos(t)ide analogues entecavir and tenofovir are the most frequent antivirals prescribed as HBV therapy. Almost all patients adherent to the medication achieve undetectable plasma viremia beyond 6 months of monotherapy. However, less than 5% achieve anti-HBs seroconversion, and viral rebound occurs following drug discontinuation. Therefore, nucleos(t)ide analogues need to be lifelong. New long-acting formulations of tenofovir and entecavir are being developed that will maximize treatment benefit and overcome adherence barriers. Furthermore, new antiviral agents are in development, including entry inhibitors, capside assembly modulators, and RNA interference molecules. The use of combination therapy pursues a functional HBV cure, meaning it is negative for both circulating HBV-DNA and HBsAg. Even when this goal is achieved, the cccDNA reservoir within infected hepatocytes remains a signal of past infection, and HBV can reactivate under immune suppression. Therefore, new gene therapies, including gene editing, are eagerly being pursued to silence or definitively disrupt HBV genomes within infected hepatocytes and, in this way, ultimately cure hepatitis B. At this time, three actions can be taken to push HBV eradication globally: (1) expand universal newborn HBV vaccination; (2) perform once-in-life testing of all adults to identify susceptible HBV persons that could be vaccinated (or re-vaccinated) and unveil asymptomatic carriers that could benefit from treatment; and (3) provide earlier antiviral therapy to chronic HBV carriers, as being aviremic reduces the risk of both clinical progression and transmission.

Development of Polyvinyl Alcohol/Polyethylene Glycol Copolymer-based Orodispersible Films Loaded with Entecavir: Formulation and In vitro Characterization

PURPOSE

The aim of the study is to prepare entecavir (ETV)-loaded orodispersible films (ODFs) using polyvinyl alcohol (PVA)/polyethylene glycol (PEG) graft copolymer (Kollicoat® IR) as a film-forming agent, and further to evaluate the dissolution rate, mechanical and physicochemical properties of films.

METHODS

ETV-ODFs were prepared by a solvent casting method. The amount of film-forming agent, plasticizer, and disintegrating agent was optimized in terms of the appearance, thickness, disintegration time and mechanical properties of ODFs. The compatibility between the drug and each excipient was conducted under high temperature (60 °C), high humidity (RH 92.5%), and strong light (4500 Lx) for 10 days. The dissolution study of optimal ODFs compared with the original commercial tablet (Baraclude®) was performed using a paddle method in pH 1.0, pH 4.5, pH 6.8, and pH 7.4 media at 37 °C. The morphology of ODFs was observed via scanning electron microscopy (SEM). The mechanical properties such as tensile strength (TS), elastic modulus (EM), and percentage elongation (E%) of ODFs were evaluated using the universal testing machine. The physicochemical properties of ODFs were investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR).

RESULTS

The related substances were less than 0.5% under high temperature, high humidity, and strong light for 10 days when ETV was mixed with excipients. The optimal formulation of ODFs was set as the quality ratio of Kollicoat® IR, glycerol, sodium alginate (ALG-Na): TiO2: MCC+CMC-Na: ETV was 60:9:12:1:1:1. The drug-loaded ODFs were white and translucent with excellent stripping property. The thickness, disintegration time, EM, TS, and E% were 103.33±7.02 μm, 25.31±1.95 s, 25.34±8.69 Mpa, 2.14±0.26 Mpa, and 65.45±19.41 %, respectively. The cumulative drug release from ODFs was more than 90% in four different media at 10 min. The SEM showed that the drug was highly dispersible in ODFs, and the XRD, DSC, and FT-IR results showed that there occurred some interactions between the drug and excipients.

CONCLUSION

In conclusion, the developed ETV-loaded ODFs showed relatively short disintegration time, rapid drug dissolution, and excellent mechanical properties. This might be an alternative to conventional ETV Tablets for the treatment of chronic hepatitis B.

Chronic Hepatitis B Infection: New Approaches towards Cure

Chronic hepatitis B virus (HBV) infection leads to the development of cirrhosis and hepatocellular carcinoma. Lifelong treatment with nucleotides/nucleoside antiviral agents is effective at suppressing HBV replication, however, adherence to daily therapy can be challenging. This review discusses recent advances in the development of long-acting formulations for HBV treatment and prevention, which could potentially improve adherence. Promising new compounds that target distinct steps of the virus life cycle are summarized. In addition to treatments that suppress viral replication, curative strategies are focused on the elimination of covalently closed circular DNA and the inactivation of the integrated viral DNA from infected hepatocytes. We highlight promising long-acting antivirals and genome editing strategies for the elimination or deactivation of persistent viral DNA products in development.

Long-Acting Treatments for Hepatitis B

There are an estimated 257 million persons living with chronic hepatitis B for whom there are multiple potential applications of long-acting antiviral compounds. Current efforts include both injection and implant approaches to formulating derivates of existing anti-HBV compounds such as tenofovir or entecavir. Substantial progress has already occurred especially as aligned with the development of long-acting tenofovir-based medications with dual activity against human immunodeficiency virus (HIV) and hepatitis B virus (HBV). Nonetheless, substantial challenges will need to be overcome before these agents are available.

Polymeric nanomedicines for the treatment of hepatic diseases

The liver is an important organ in the human body and performs many functions, such as digestion, detoxification, metabolism, immune responses, and vitamin and mineral storage. Therefore, disorders of liver functions triggered by various hepatic diseases, including hepatitis B virus infection, nonalcoholic steatohepatitis, hepatic fibrosis, hepatocellular carcinoma, and transplant rejection, significantly threaten human health worldwide. Polymer-based nanomedicines, which can be easily engineered with ideal physicochemical characteristics and functions, have considerable merits, including contributions to improved therapeutic outcomes and reduced adverse effects of drugs, in the treatment of hepatic diseases compared to traditional therapeutic agents. This review describes liver anatomy and function, and liver targeting strategies, hepatic disease treatment applications and intrahepatic fates of polymeric nanomedicines. The challenges and outlooks of hepatic disease treatment with polymeric nanomedicines are also discussed.

HIV nucleoside reverse transcriptase inhibitors

More than 40 years into the pandemic, HIV remains a global burden and as of now, there is no cure in sight. Fortunately, highly active antiretroviral therapy (HAART) has been developed to manage and suppress HIV infection. Combinations of two to three drugs targeting key viral proteins, including compounds inhibiting HIV reverse transcriptase (RT), have become the cornerstone of HIV treatment. This review discusses nucleoside reverse transcriptase inhibitors (NRTIs), including chain terminators, delayed chain terminators, nucleoside reverse transcriptase translocation inhibitors (NRTTIs), and nucleotide competing RT inhibitors (NcRTIs); focusing on their history, mechanism of action, resistance, and current clinical application, including long-acting regimens.

Hyaluronic acid-entecavir conjugates-core/lipid-shell nanohybrids for efficient macrophage uptake and hepatotropic prospects

Drug covalently bound to polymers had formed, lately, platforms with great promise in drug delivery. These drug polymer conjugates (DPC) boosted drug loading and controlled medicine release with targeting ability. Herein, the ability of entecavir (E) conjugated to hyaluronic acid (HA) forming the core of vitamin E coated lipid nanohybrids (EE-HA LPH), to target Kupffer cells and hepatocyte had been proved. The drug was associated to HA with efficiency of 93.48 ± 3.14 % and nanohybrids loading of 22.02 ± 2.3 %. DiI labelled lipidic nanohybrids improved the macrophage uptake in J774 cells with a 21 day hepatocytes retention post intramuscular injection. Finally, in vivo biocompatibility and safety with respect to body weight, organs indices and histopathological alterations were demonstrated. Coating with vitamin E and conjugation of E to HA (a CD44 ligand), could give grounds for prospective application for vectored nano-platform in hepatitis B.

Formulation optimization and in vitro characterization of granisetron-loaded polylactic-co-glycolic acid microspheres prepared by a dropping-in-liquid emulsification technique

PURPOSE

Traditional dosage forms of granisetron (GRN) decrease patient compliance associated with repeated drug administration because of the short half-life of the drug.

METHODS

In this study, novel GRN-loaded polylactic-co-glycolic acid (PLGA) sustained release microspheres were prepared for the first time via a dropping-in-liquid emulsification technique. The effect of various factors, such as pH of the outer phase, Tween80, polyvinyl alcohol (PVA) concentrations, and hardening process, on the encapsulation efficiency (EE), drug loading (DL), and particle size of microspheres were extensively studied. The physicochemical properties, including drug release, surface morphology, crystallinity, thermal changes, and molecular interactions, were also studied.

RESULTS

GRN has a pH-dependent solubility and showed a remarkably high solubility under an acidic condition. The EE of the alkaline medium (pH 8) was higher than that of the acidic medium (pH 4.0). EE and DL decreased in the presence of Tween80 in the outer phase, whereas EE significantly increased during hardening. The particle size of microspheres was not affected by PVA and Tween80 concentrations, but it was influenced by PVA volume and hardening. X-ray diffraction and differential scanning calorimetry results showed that the physical state of the drug changed from a crystalline form to an amorphous form, thereby confirming that the drug was encapsulated into the PLGA matrix. Fourier transform-infrared spectroscopy confirmed that some molecular interactions occurred between the drug and the polymer. GRN-loaded PLGA microspheres showed sustained release profiles of over 90% on week 3.

CONCLUSION

GRN-loaded PLGA microspheres with sustained release were successfully prepared, and they exhibited a relatively high EE without Tween 80 as an emulsifier and with hardening process.

Antiviral Drug Delivery System for Enhanced Bioactivity, Better Metabolism and Pharmacokinetic Characteristics

Antiviral drugs (AvDs) are the primary resource in the global battle against viruses, including the recent fight against corona virus disease 2019 (COVID-19). Most AvDs require multiple medications, and their use frequently leads to drug resistance, since they have poor oral bioavailability and low efficacy due to their low solubility/low permeability. Characterizing the in vivo metabolism and pharmacokinetic characteristics of AvDs may help to solve the problems associated with AvDs and enhance their efficacy. In this review of AvDs, we systematically investigated their structure-based metabolic reactions and related enzymes, their cellular pharmacology, and the effects of metabolism on AvD pharmacodynamics and pharmacokinetics. We further assessed how delivery systems achieve better metabolism and pharmacology of AvDs. This review suggests that suitable nanosystems may help to achieve better pharmacological activity and pharmacokinetic behavior of AvDs by altering drug metabolism through the utilization of advanced nanotechnology and appropriate administration routes. Notably, such AvDs as ribavirin, remdesivir, favipiravir, chloroquine, lopinavir and ritonavir have been confirmed to bind to the severe acute respiratory syndrome-like coronavirus (SARS-CoV-2) receptor and thus may represent anti-COVID-19 treatments. Elucidating the metabolic and pharmacokinetic characteristics of AvDs may help pharmacologists to identify new formulations with high bioavailability and efficacy and help physicians to better treat virus-related diseases, including COVID-19.

Europium sulfide nanoprobes predict antiretroviral drug delivery into HIV-1 cell and tissue reservoirs

Background: Delivery of long-acting nanoformulated antiretroviral drugs (ARVs) to human immunodeficiency virus type one cell and tissue reservoirs underlies next generation antiretroviral therapeutics. Nanotheranostics, comprised of trackable nanoparticle adjuncts, can facilitate ARV delivery through real-time drug tracking made possible through bioimaging platforms. Methods: To model HIV-1 therapeutic delivery, europium sulfide (EuS) nanoprobes were developed, characterized and then deployed to cells, tissues, and rodents. Tests were performed with nanoformulated rilpivirine (NRPV), a non-nucleoside reverse transcriptase inhibitor (NNRTI) used clinically to suppress or prevent HIV-1 infection. First, CD4+ T cells and monocyte-derived macrophages were EuS-treated with and without endocytic blockers to identify nanoprobe uptake into cells. Second, Balb/c mice were co-dosed with NRPV and EuS or lutetium177-doped EuS (177LuEuS) theranostic nanoparticles to assess NRPV biodistribution via mass spectrometry. Third, single photon emission computed tomography (SPECT-CT) and magnetic resonance imaging (MRI) bioimaging were used to determine nanotheranostic and NRPV anatomic redistribution over time. Results: EuS nanoprobes and NRPV entered cells through dynamin-dependent pathways. SPECT-CT and MRI identified biodistribution patterns within the reticuloendothelial system for EuS that was coordinate with NRPV trafficking. Conclusions: EuS nanoprobes parallel the uptake and biodistribution of NRPV. These data support their use in modeling NRPV delivery to improve treatment strategies.

Long-Acting Formulations: A Promising Approach for the Treatment of Chronic Diseases

Medication and patient adherence are the two main aspects of any successful treatment of chronic disease. Even though diseases and its treatment existed for several hundred years, the treatment optimization for a given patient is still a researcher question for scientists. There are differences in treatment duration, prognostic signs and symptoms between patient to patient. Hence, designing ideal formulation to suit individual patient is a challenging task. The conventional formulations like oral solids and liquids gives a partial or incomplete treatment because the patient needs to follow the daily pills for a longer time. In such cases, the long-acting formulations will have better patient compliances as drug will be released for a longer duration. Many such approaches are under the clinical investigation. The favorable pharmacokinetic and pharmacodynamic relationships, will be promising option for the treatment of chronic diseases. In this review, we have highlighted the importance of long-acting formulations in the treatment of chronic diseases and the advent of newer formulation technologies.

Preparation and Release Profiles in Vitro/Vivo of Galantamine Pamoate Loaded Poly (Lactideco-Glycolide) (PLGA) Microspheres

Patient’s poor compliance and the high risk of toxic effects limit the clinical use of galantamine hydrobromide. To overcome these drawbacks, the sustained-release galantamine pamoate microspheres (GLT-PM-MS) were successfully developed using an oil/water emulsion solvent evaporation method in this study. Physicochemical properties of GLT-PM-MS were carefully characterized, and the in vitro and in vivo drug release behaviors were well studied. Results showed that the morphology of optimized microspheres were spherical with smooth surfaces and core-shell interior structure. Mean particle size, drug loading and entrapment efficiency were 75.23 ± 1.79 μm, 28.01 ± 0.81% and 87.12 ± 2.71%, respectively. The developed GLT-PM-MS were found to have a sustained release for about 24 days in vitro and the plasma drug concentration remained stable for 17 days in rats. These results indicated that GLT-PM-MS could achieve the sustained drug release purpose and be used in clinical trial.

Ammonium glycyrrhizate skin delivery from ultradeformable liposomes: A novel use as an anti-inflammatory agent in topical drug delivery

Glycyrrhiza glabra L. is a native plant of Central and South-Western Asia that is also diffused in the Mediterranean area and contains several bioactive compounds such as: flavonoids, sterols, triterpene and saponins. Glycyrrhizin, containing glycyrrhizic and glycyrrhizinic acids has anti-inflammatory and antiallergic effects that are similar to corticosteroids. Ammonium glycyrrhizinate is a derivative salt of glycyrrhizic acid with similar anti-inflammatory activity that cannot pass through the skin due to its physicochemical properties and molecular weight. Although several nanoformulations, such as ethosomes, are designed to provide a systemic effect through a topical application, there are different limitations to the distribution inside the blood stream. For this reason, ultradeformable liposomes, or transfersomes, are selected to improve the topical delivery of drugs and allow the distribution of payloads in the blood stream because they pass intact through the stratum corneum epidermis barrier, due to the presence of sodium cholate, aqueous cutaneous gradient, and the rapid penetration of transfersomes by cutaneous tight junctions, thus allowing the systemic delivery of different therapeutic cargo in non-occlusive conditions. The aim of this work was the synthesis and physicochemical characterization of the ammonium glycyrrhizinate-loaded ultradeformable liposomes, the evaluation of drug release and permeation through stratum corneum and epidermis barrier. The in vivo anti-inflammatory effect of ammonium glycyrrhizinate-loaded ultradeformable liposomes was tested on human healthy volunteers. The results demonstrated that the ammonium glycyrrhizinate-loaded ultradeformable liposomes decreased the skin inflammation on the human volunteers and the resulting nanoformulations can be used as a potential topical drug delivery system for anti-inflammatory therapy. ^☆Parts of these results were presented as a poster communication at the Recent Developments in Pharmaceutical Analysis 2019 (RDPA 2019), Chieti, Italy.

An integrated vitamin E-coated polymer hybrid nanoplatform: A lucrative option for an enhanced in vitro macrophage retention for an anti-hepatitis B therapeutic prospect

A platform capable of specifically delivering an antiviral drug to the liver infected with hepatitis B is a major concern in hepatology. Vaccination has had a major effect on decreasing the emerging numbers of new cases of infection. However, the total elimination of the hepatitis B virus from the body requires prolonged therapy. In this work, we aimed to target the liver macrophages with lipid polymer hybrid nanoparticles (LPH), combining the merit of polymeric nanoparticles and lipid vesicles. The hydrophilic antiviral drug, entecavir (E), loaded LPH nanoparticles were optimized and physicochemically characterized. A modulated lipidic corona, as well as, an additional coat with vitamin E were used to extend the drug release enhance the macrophage uptake. The selected vitamin E coated LPH nanoparticles enriched with lecithin-glyceryl monostearate lipid shell exhibited high entrapment for E (80.47%), a size ≤ 200 nm for liver passive targeting, extended release over one week, proven serum stability, retained stability after refrigeration storage for 6 months. Upon macrophage uptake in vitro assessment, the presented formulation displayed promising traits, enhancing the cellular retention in J774 macrophages cells. In vivo and antiviral activity futuristic studies would help in the potential application of the ELPH in hepatitis B control.