Dynamics of water and xanthan chains in hydrogels studied by NMR relaxometry and their influence on drug release

In Situ Forming, Enzyme-Responsive Peptoid-Peptide Hydrogels: An Advanced Long-Acting Injectable Drug Delivery System

Long-acting drug delivery systems are promising platforms to improve patient adherence to medication by delivering drugs over sustained periods and removing the need for patients to comply with oral regimens. This research paper provides a proof-of-concept for the development of a new optimized in situ forming injectable depot based on a tetrabenzylamine-tetraglycine-d-lysine-O-phospho-d-tyrosine peptoid-D-peptide formulation ((NPhe)4GGGGk(AZT)y(p)-OH). The chemical versatility of the peptoid-peptide motif allows low-molecular-weight drugs to be precisely and covalently conjugated. After subcutaneous injection, a hydrogel depot forms from the solubilized peptoid-peptide-drug formulation in response to phosphatase enzymes present within the skin space. This system is able to deliver clinically relevant concentrations of a model drug, the antiretroviral zidovudine (AZT), for 35 days in Sprague-Dawley rats. Oscillatory rheology demonstrated that hydrogel formation began within ∼30 s, an important characteristic of in situ systems for reducing initial drug bursts. Gel formation continued for up to ∼90 min. Small-angle neutron scattering data reveal narrow-radius fibers (∼0.78-1.8 nm) that closely fit formation via a flexible cylinder elliptical model. The inclusion of non-native peptoid monomers and D-variant amino acids confers protease resistance, enabling enhanced biostability to be demonstrated in vitro. Drug release proceeds via hydrolysis of an ester linkage under physiological conditions, releasing the drug in an unmodified form and further reducing the initial drug burst. Subcutaneous administration of (NPhe)4GGGGk(AZT)y(p)-OH to Sprague-Dawley rats resulted in zidovudine blood plasma concentrations within the 90% maximal inhibitory concentration (IC90) range (30-130 ng mL-1) for 35 days.

Water Dynamics in Dextran-Based Hydrogel Micro/Nanoparticles Studied by NMR Diffusometry and Relaxometry

Water dynamics in mesoporous dextran hydrogel micro/nanoparticles was investigated by means of nuclear magnetic resonance (NMR) techniques. High-resolution 1H NMR spectra and pulsed field gradient (PFG) NMR diffusometry measurements obtained on swollen state dextran micro/nanogel revealed the existence of different fractions of water molecules based on their interaction with the gel matrix. In addition to the translational diffusion of bulk water, two more diffusion processes characterized with self-diffusion coefficients 1 and 2 orders of magnitude smaller than that of bulk water were identified. 1H spin-lattice relaxation dispersion profiles obtained for a broad range of Larmor frequencies using fast field cycling (FFC) and conventional NMR relaxometry techniques allowed us to further clarify the mechanisms of molecular motion. According to the water proton pool fractions and associated self-diffusion coefficients, it is shown that the relaxation contribution associated with reorientation-mediated translational motions (RMTDs) dominates the relaxation dispersion observed at intermediate frequencies. At very low frequencies, the spin-lattice relaxation rate is dominated by the slow solid-gel dynamics probed by the water molecules interacting with the pores' surface hydroxyl groups due to the rapid chemical exchange between surface hydroxyl groups and free water. The correlation time for the thumbling-like motion of the dextran gel was found to be in the submillisecond range. The values of the self-diffusion and coherence lengths associated with motion of water molecules interacting with the solid-gel particles are consistent with the particle size and pore size distributions obtained for the studied dextran gels.

Anionic polysaccharides for stabilization and sustained release of antimicrobial peptides

Chemical and enzymatic in vivo degradation of antimicrobial peptides represents a major challenge for their therapeutic use to treat bacterial infections. In this work, anionic polysaccharides were investigated for their ability to increase the chemical stability and achieve sustained release of such peptides. The investigated formulations comprised a combination of antimicrobial peptides (vancomycin (VAN) and daptomycin (DAP)) and anionic polysaccharides (xanthan gum (XA), hyaluronic acid (HA), propylene glycol alginate (PGA) and alginic acid (ALG)). VAN dissolved in buffer of pH 7.4 and incubated at 37 °C showed first order degradation kinetics with a reaction rate constant k_obs of 5.5 × 10^-2 day^-1 corresponding with a half-life of 13.9 days. However, once VAN was present in a XA, HA or PGA-based hydrogel, k_obs decreased to (2.1-2.3) × 10^-2 day^-1 while k_obs was not affected in an alginate hydrogel and a dextran solution (5.4 × 10^-2 and 4.4 × 10^-2 day^-1). Under the same conditions, XA and PGA also effectively decreased k_obs for DAP (5.6 × 10^-2 day^-1), whereas ALG had no effect and HA even increased the degradation rate. These results demonstrate that the investigated polysaccharides (except ALG for both peptides and HA for DAP) slowed down the degradation of VAN and DAP. DSC analysis was used to investigate on polysaccharide ability to bind water molecules. Rheological analysis highlighted that the polysaccharides containing VAN displayed an increase in G' of their formulations, pointing that the peptides interaction act as crosslinker of the polymer chains. The obtained results suggest that the mechanism of stabilization of VAN and DAP against hydrolytic degradation is conferred by electrostatic interactions between the ionizable amine groups of the drugs and the anionic carboxylate groups of the polysaccharides. This, in turn, results in a close proximity of the drugs to the polysaccharide chain, where the water molecules have a lower mobility and, therefore, a lower thermodynamic activity.

Structure-property relationship in the evaluation of xanthan gum functionality for oral suspensions and tablets

The functional properties of xanthan gum (XG) in pharmaceutical preparations depend on its rheological properties, which inevitably rely on its molecular structure. Hence, this work investigated the relationship between the molecular structure of XG and its rheological properties and functional characteristics, and revealed the structural factors influencing the XG functionalities in oral suspensions and matrix tablets. Primarily, the molecular structures of four commercial XG products were characterized by infrared spectroscopy, differential scanning calorimetry and measuring the monosaccharide composition, average molecular weight, and pyruvate and acetyl contents. Furthermore, the flow behavior and viscoelasticity of XG solutions, the viscoelasticity of XG hydrogels, and XG combinations (XGC, aqueous solution containing XG, liquid glucose, and glycerin) were investigated. Finally, the dissolution time of XGC and the swelling and erosion properties of the XG matrix were studied to evaluate XG functionality in oral suspensions and matrix tablets, respectively. Results showed that the polydispersity of molecular weight and the pyruvate content affected the functionality and performance of XG in suspension and tablet forms. The higher polydispersity and pyruvate content of XG improved the hydrogel strength, which led to a longer dissolution time of XGC and a higher swelling extent of the XG matrix but a slower erosion rate.

Incorporation of PEG Diacrylates (PEGDA) Generates Hybrid Fmoc-FF Hydrogel Matrices

Generated by a hierarchical and multiscale self-assembling phenomenon, peptide-based hydrogels (HGs) are soft materials useful for a variety of applications. Short and ultra-short peptides are intriguing building blocks for hydrogel fabrication. These matrices can also be obtained by mixing low-molecular-weight peptides with other chemical entities (e.g., polymers, other peptides). The combination of two or more constituents opens the door to the development of hybrid systems with tunable mechanical properties and unexpected biofunctionalities or morphologies. For this scope, the formulation, the multiscale analysis, and the supramolecular characterization of novel hybrid peptide-polymer hydrogels are herein described. The proposed matrices contain the Fmoc-FF (N^α-fluorenylmethyloxycarbonyl diphenylalanine) hydrogelator at a concentration of 0.5 wt% (5.0 mg/mL) and a diacrylate α-/ω-substituted polyethylene-glycol derivative (PEGDA). Two PEGDA derivatives, PEGDA 1 and PEGDA2 (mean molecular weights of 575 and 250 Da, respectively), are mixed with Fmoc-FF at different ratios (Fmoc-FF/PEGDA at 1/1, 1/2, 1/5, 1/10 mol/mol). All the multicomponent hybrid peptide-polymer hydrogels are scrutinized with a large panel of analytical techniques (including proton relaxometry, FTIR, WAXS, rheometry, and scanning electronic microscopy). The matrices were found to be able to generate mechanical responses in the 2-8 kPa range, producing a panel of tunable materials with the same chemical composition. The release of a model drug (Naphthol Yellow S) is reported too. The tunable features, the different topologies, and the versatility of the proposed materials open the door to the development of tools for different applicative areas, including diagnostics, liquid biopsies and responsive materials. The incorporation of a diacrylate function also suggests the possible development of interpenetrating networks upon cross-linking reactions. All the collected data allow a mutual comparison between the different matrices, thus confirming the significance of the hybrid peptide/polymer-based methodology as a strategy for the design of innovative materials.

Self-Healing Thermosensitive Hydrogel for Sustained Release of Dexamethasone for Ocular Therapy

The aim of this study was to develop an injectable hydrogel delivery system for sustained ocular delivery of dexamethasone. To this end, a self-healing hydrogel consisting of a thermosensitive ABA triblock copolymer was designed. The drug was covalently linked to the polymer by copolymerization of methacrylated dexamethasone with N-isopropylacrylamide (NIPAM) and N-acryloxysuccinimide (NAS) through reversible addition-fragmentation chain transfer (RAFT) polymerization, using poly(ethylene glycol) (PEG) functionalized at both ends with a chain transfer agent (CTA). Hydrogel formation was achieved by mixing aqueous solutions of the formed thermosensitive polymer (with a cloud point of 23 °C) with cystamine at 37 °C, to result in covalent cross-linking due to the reaction of the N-hydroxysuccimide (NHS) functionality of the polymer and the primary amines of cystamine. Rheological analysis showed both thermogelation and covalent cross-linking at 37 °C, as well as the self-healing properties of the formed network, which was attributed to the presence of disulfide bonds in the cystamine cross-links, making the system injectable. The release of dexamethasone from the hydrogel occurred through ester hydrolysis following first-order kinetics in an aqueous medium at pH 7.4 over 430 days at 37 °C. Based on simulations, administration of 100 mg of hydrogel would be sufficient for maintaining therapeutic levels of dexamethasone in the vitreous for at least 500 days. Importantly, dexamethasone was released from the hydrogel in its native form as determined by LC-MS analysis. Cytocompatibility studies showed that at clinically relevant concentrations, both the polymer and the cross-linker were well tolerated by adult retinal pigment epithelium (ARPE-19) cells. Moreover, the hydrogel did not show any toxicity to ARPE-19 cells. The injectability of the hydrogel, together with the long-lasting release of dexamethasone and good cytocompatibility with a retinal cell line, makes this delivery system an attractive candidate for treatment of ocular inflammatory diseases.

Dynamics of Arabic gum aqueous solutions as revealed by NMR relaxometry

BACKGROUND

The purpose of this article is to study molecular dynamics through nuclear magnetic relaxation (NMR) dispersion of Arabic gum aqueous solutions analysed in terms of two-fraction exchange model.

RESULTS

The experiments revealed that relaxation of water molecules was non-monoexponential, which was interpreted in terms of a model describing the magnetization transfer due to exchange of water and polysaccharide protons. The analysis showed that water dynamics decreased slightly with gum content. Polymer-chain dynamics was assigned to regime II of the tube/reptation model. Peculiar temperature dependence of exchange rate was observed in the whole concentration range of Arabic gum solutions.

CONCLUSION

NMR relaxation probed in a broad frequency and temperature range allows probing of the molecular dynamics of complex food systems. © 2022 Society of Chemical Industry.

Multicomponent Hydrogel Matrices of Fmoc-FF and Cationic Peptides for Application in Tissue Engineering

In the last years, peptide based hydrogels are being increasingly used as suitable matrices for biomedical and pharmaceutical applications, including drug delivery and tissue engineering. Recently, we decrived the synthesis and the gelation properties of a small library of cationic peptides, containing a Lys residue at the C-teminus and derivatized with a Fmoc group or with the Fmoc-diphenylalanine (FmocFF) at the N-terminus. Here, we demonstrate that the combination of these peptides with the well known hydrogelator FmocFF, in different weight/weight ratios, allows the achievement of seven novel self-sorted hydrogels, which share similar peptide organization of their supramolecular matrix. Rheological and relaxometric characterization highlighted a different mechanical rigidity and water mobility in the gels as demostrated by the storage modulus values (200 Pa<G'<35000 Pa) and by relaxometry, respectively. In vitro studied demonstrated that most of the tested mixed hydrogels do not disturb significantly the cell viability (>95%) over 72h of treatment. Moreover, in virtue to its capability to strongly favour adhesion, spreading and duplication of 3T3-L1 cells, one of the tested hydrogel may be eligible as sinthetic extracellular matrix. This article is protected by copyright. All rights reserved.

Release kinetics of hydroxypropyl methylcellulose governing drug release and hydrodynamic changes of matrix tablet

BACKGROUND

Hydrophilic hydroxypropyl methylcellulose (HPMC) matrix tablets are the standard role model of the oral controlled-release formulation. Nevertheless, the HPMC kinetics for the mechanistic understanding of drug release and hydrodynamic behaviors are rarely investigated. This study aims to investigate the release behaviors of both HPMC and paracetamol (model drug) from the hydrophilic matrix tablet.

METHODS

Two different viscosity grades of HPMC were used (Low viscosity: 6 cps, High viscosity: 4,000 cps). Three different ratios of drug/HPMC (H:38.08%, M:22.85%, and L:15.23% (w/w) of HPMC amounts in total weight) matrix tablets were prepared by wet granulation technique. The release profiles of the drug and HPMC in a matrix tablet were quantitatively analyzed by HPLC and 1H-nuclear magnetic resonance (NMR) spectroscopy. The hydrodynamic changes of HPMC were determined by the gravimetric behaviors such as swelling and erosion rates, gel layer thickness, front movement data,and distributive near-infrared (NIR) chemical imaging of HPMC in a matrix tablet during the dissolution process.

RESULTS

High viscosity HPMC tablets showed slower release of HPMC than the release rate of drug, suggesting that drug release preceded polymer release.Different hydration phenomenon was qualitatively identified and corresponded to the release profiles. The release behaviors of HPMC and drug in the tablet could be distinguished with the significant difference with fitted dissolution kinetics model (Low viscosity HPMC 6cps; Korsmeyer-Peppas model, High viscosity HPMC 4000cps; Hopfenberg model, Paracetamol; Weibull model) according to the weight of ingredients and types of HPMC.

CONCLUSION

The determination of HPMC polymer release correlating with drug release, hydrodynamic behavior, and NIR chemical imaging of HPMC can provide new insights into the drug release-modulating mechanism in the hydrophilic matrix system.

Water dynamics in eggs by means of Nuclear Magnetic Resonance relaxometry

¹H Nuclear Magnetic Resonance relaxometry has been applied to reveal dynamical properties of water molecules embedded into egg yolk and white of three species: turkey, chicken and quail. Two fractions of water molecules, referred to as confined-water and free-water fractions, have been revealed. It has been demonstrated that translation diffusion of the confined-water fraction is three-dimensional. The dynamics of the confined-water has been quantitatively described in terms of diffusion coefficients and rotational correlation times. The parameters have been compared for egg yolk and white for all the species. In addition to these quantities, the number of the confined-water molecules per unit volume has been provided for all cases. The obtained parameters provide insight into the dynamics of water in eggs of different origin and allow to identify similarities and differences between them in connection to the structure of the network formed by the macromolecular fraction of egg yolk and white.

Treatment challenges and delivery systems in immunomodulation and probiotic therapies for periodontitis

Introduction: Periodontitis is a widespread illness that arises due to disrupted interplay between the oral microbiota and the host immune response. In some cases, conventional therapies can provide temporary remission, although this is often followed by disease relapse. Recent studies of periodontitis pathology have promoted the development of new therapeutics to improve treatment options, together with local application using advanced drug delivery systems.Areas covered: This paper provides a critical review of the status of current treatment approaches to periodontitis, with a focus on promising immunomodulation and probiotic therapies. These are based on delivery of small molecules, peptides, proteins, DNA or RNA, and probiotics. The key findings on novel treatment strategies and formulation of advanced delivery systems, such as nanoparticles and nanofibers, are highlighted.Expert opinion: Multitarget therapy based on antimicrobial, immunomodulatory, and probiotic active ingredients incorporated into advanced delivery systems for application to the periodontal pocket can improve periodontitis treatment outcomes. Translation of such adjuvant therapy from laboratory to patient is expected in the future.

Magnetic Resonance Methods as a Prognostic Tool for the Biorelevant Behavior of Xanthan Tablets

Hydrophilic matrix tablets with controlled drug release have been used extensively as one of the most successful oral drug delivery systems for optimizing therapeutic efficacy. In this work, magnetic resonance imaging (MRI) is used to study the influence of various pHs and mechanical stresses caused by medium flow (at rest, 80, or 150 mL/min) on swelling and on pentoxifylline release from xanthan (Xan) tablets. Moreover, a bimodal MRI system with simultaneous release testing enables measurements of hydrogel thickness and drug release, both under the same experimental conditions and at the same time. The results show that in water, the hydrogel structure is weaker and less resistant to erosion than the Xan structure in the acid medium. Different hydrogel structures affect drug release with erosion controlled release in water and diffusion controlled release in the acid medium. Mechanical stress simulating gastrointestinal contraction has no effect on the hard hydrogel in the acid medium where the release is independent of the tested stress, while it affects the release from the weak hydrogel in water with faster release under high stress. Our findings suggest that simultaneous MR imaging and drug release from matrix tablets together provide a valuable prognostic tool for prolonged drug delivery design.

Hydrogels as Drug Delivery Systems: A Review of Current Characterization and Evaluation Techniques

Owing to their tunable properties, controllable degradation, and ability to protect labile drugs, hydrogels are increasingly investigated as local drug delivery systems. However, a lack of standardized methodologies used to characterize and evaluate drug release poses significant difficulties when comparing findings from different investigations, preventing an accurate assessment of systems. Here, we review the commonly used analytical techniques for drug detection and quantification from hydrogel delivery systems. The experimental conditions of drug release in saline solutions and their impact are discussed, along with the main mathematical and statistical approaches to characterize drug release profiles. We also review methods to determine drug diffusion coefficients and in vitro and in vivo models used to assess drug release and efficacy with the goal to provide guidelines and harmonized practices when investigating novel hydrogel drug delivery systems.

Xanthan Gum-Incorporated Natural Rubber Film Casted with Solvent Evaporation

Xanthan gum (X)-incorporated natural rubber (NR) cast films were fabricated from blocked NR by solvent casting method using dichloromethane as the solvent. The rather smooth films were obtained. X markedly promoted both of water sorption and erosion in phosphate buffer pH 7.4 of these composite films. With increasing X amount also significantly enhanced the film tensile strength, Young’s modulus and area under the curve while did not affect contact angle of water/formamide and surface free energy. 30%X-loaded NR films exhibited the highest durability with apparently high water sorption and erosion for further using such as wound dressing.

Polyelectrolyte-surfactant-complex nanoparticles as a delivery platform for poorly soluble drugs: A case study of ibuprofen loaded cetylpyridinium-alginate system

Previously, we reported on the surfactant cetylpyridinium chloride (CPC) as a crosslinker of alginate for the formation of stable polyelectrolyte-surfactant-complex nanoparticles. Here, we evaluate this system for increased solubility of a poorly soluble drug. The aim was to use CPC for solubilisation of ibuprofen and to use the micellar associates formed for alginate complexation and nanoparticle formation. We acquired deeper insights into the entropy led interactions between alginate, CPC and ibuprofen. Stable nanoparticles were formed across limited surfactant-to-polyelectrolyte molar ratios, with ~150 nm hydrodynamic diameter, monodispersed distribution, and negative zeta potential (-40 mV), with 34% ibuprofen loading. Their structure was obtained using small-angle X-ray scattering, which indicated disordered micellar associates when ibuprofen was incorporated. This resulted in nanoparticles with a complex nanostructured composition, as shown by transmission electron microscopy. Drug release from ibuprofen-cetylpyridinium-alginate nanoparticles was not hindered by alginate, and was similar to the release kinetics from ibuprofen-CPC solubilisates. These innovative carriers developed as polyelectrolyte-surfactant complexes can be used for solubilisation of poorly soluble drugs, where the surfactant simultaneously increases the solubility of the drug at concentrations below its critical micellar concentration and crosslinks the polyelectrolyte to form nanoparticles.