Sodium dodecyl sulfate improved stability and transdermal delivery of salidroside-encapsulated niosomes via effects on zeta potential

Design, fabrication, and evaluation of antimicrobial sponge microneedles for the transdermal delivery of insulin

Transdermal drug delivery systems hold promise, but their effectiveness is often constrained by the skin's barrier. Microneedles (MNs) improve drug permeability by creating micro-channels in the skin, yet they continue to face challenges such as infection risks and safety concerns. To overcome these challenges, a novel antimicrobial sponge MNs (ASMNs@PVP-INS) modified with polyvinylpyrrolidone (PVP) for insulin (INS) delivery was designed. Mechanical testing demonstrated that these MNs possess excellent mechanical strength, capable of withstanding at least 0.11 N per needle without rupture. In vitro drug penetration tests revealed that the MNs consistently released over 75 % of INS within a 6 h. In an animal model, ASMNs@PVP-INS reduced initial blood glucose levels from 22.4 to 5.72 mmol/L, effectively maintaining glucose control for more than 6 h without inducing hypoglycemia. Additionally, agar diffusion assays indicated that INS loading did not compromise the antimicrobial properties of antimicrobial sponge MNs (ASMNs). Skin irritation tests showed that ASMNs@PVP-INS exhibited mild irritation (PII < 0.6), with skin damage fully recovering within 8 h. Safety assessments indicated no significant toxicity to mice, with biochemical markers remaining within normal ranges, thereby confirming their good biocompatibility. In conclusion, ASMNs@PVP-INS hold promise as a novel drug delivery vehicle.

Simultaneous removal of ammonia, copper ions and sulfamethoxazole from aquaculture wastewater with low carbon to nitrogen ratio enhanced by manganese redox driven by a two-stage synergistic bioreactor: Optimization and potential mechanism

The problem of low carbon-nitrogen ratio (C/N) in wastewater is a major challenge for biological treatment, especially the complex pollution of ammonia nitrogen (NH4+-N), sulfamethoxazole (SMX), and copper ions (Cu(II)). Herein, a strain of Pseudoxanthomonas sp. MA23 with manganese (Mn) reduction-coupled ammonia oxidation properties was isolated. Subsequently, kaolin and bentonite were used as the main raw materials, and a mixture of coconut shell biochar (CSBC) and different Mn ores were added to make ceramsite carriers to load the target strain MA23. To achieve complete N removal and Mn redox process, Dechloromonas sp. YZ8 with Mn redox and denitrification performance was introduced, and a second-stage bioreactor was constructed with volcanic rock as the biocarrier. The results showed that the bioreactor was most effective when the hydraulic retention time (HRT) was 20.0 and 2.0 h, C/N was 1.5, and pH was 6.5. The response of the bioreactors was investigated by inflowing different concentrations of Cu(II) and SMX. Appropriate Cu(II) concentrations promoted the electron transfer in the system, and Cu(II) and SMX were together removed by biological action and chemisorption. Furthermore, genes involved in N metabolism were enriched in the bioreactors and the microorganisms responded to environmental changes by up or down-regulating relevant metabolic genes. The synergistic system proposed in this study provided a promising attempt to simultaneously address NH4+-N-Cu(II)-SMX pollution in low C/N wastewater.

Novel Photo-STING Agonists Delivered by Erythrocyte Efferocytosis-Mimicking Pattern to Repolarize Tumor-Associated Macrophages for Boosting Anticancer Immunotherapy

Immunotherapy has emerged as a highly effective therapeutic strategy for cancer treatment. Cyclic guanosine monophosphate-adenosine monophosphate synthase (cGAS)-stimulator of interferon gene (STING) pathway activation facilitates tumor-associated macrophage (TAM) polarization toward M1 phenotype, and Mn2+ are effective agents for this pathway activation. However, the high in vivo degradation rate and toxicity of Mn2+ hamper clinical application of immunotherapy. Here, this work has newly synthesized and screened manganese porphyrins for Mn2+ transport, referred to as photo-STING agonists (PSAs), and further encapsulate them into core-shell nanoparticles named Rm@PP-GA with dual specificity for tumor tissue and TAMs. Not only do PSAs achieve higher Mn2+ delivery efficiency compared to Mn2+, but they also generate reactive oxygen species under light exposure, promoting mitochondrial DNA release for cGAS-STING pathway activation. In Rm@PP-GA, globin and red blood cell membranes (Rm) are used for erythrocyte efferocytosis-mimicking delivery. Rm can effectively prolong the in vivo circulation period while globin enables PSAs to be taken up by TAMs via CD163 receptors. After Rm rupture mediated by perfluorohexane in nanoparticles under ultrasonication, drugs are specifically released for TAM repolarization. Further, dendritic cells mature, as well as T lymphocyte infiltrate, both of which favor tumor eradication. Therefore, cancer immunotherapy is optimized by novel PSAs delivered by erythrocyte efferocytosis-mimicking delivery pattern.

Novel Cosmetic Ingredient CS-AA Polyion Complex and Skin Moisturizing Effect

PURPOSE

The study explored the enhanced skin moisturizing capabilities and moisture retention effects achieved by forming a polyion complex using sulfated glycosaminoglycan (GAG), specifically chondroitin sulfate (CS), and amino acids (AA) such as glutamine (Q) and arginine (R). The overall hydration effect of this CS-AA complex was examined.

METHODS

After analyzing the CS-AA polyion complex structure using spectroscopic methods, the ex vivo moisture retention ability was assessed under dry conditions using porcine skin samples. Additionally, the efficacy of the CS-AA polyion complex in reducing transepidermal water loss (TEWL) and improving skin hydration was evaluated on human subjects using a digital evaporimeter and a corneometer, respectively.

RESULTS

Validating a systematic reduction in particle size, the following order was observed: CS > CS/AA simple mixture > CS-AA complex based on dynamic light scattering (DLS) and transmission electron microscopy (TEM) analysis. Furthermore, observations revealed that the CS-AA complex exhibits negligible surface charge. Additionally, Fourier-transform infrared spectroscopy (FT-IR) analysis demonstrated a distinct peak shift in the complex, confirming the successful formation of the CS-AA complex. Subsequently, the water-holding effect through porcine skin was assessed, revealing a notable improvement in moisture retention (weight loss) for the CS-Q complex: 40.6% (1 h), 20.5% (2 h), and 18.7% (4 h) compared to glycerin. Similarly, the CS-R complex demonstrated enhancements of 50.2% (1 h), 37.5% (2 h), and 33% (4 h) compared to glycerin. Furthermore, TEWL improvement efficacy on human skin demonstrated approximately 25% improvement for both the CS-Q complex and CS-R complex, surpassing the modest 12.5% and 18% improvements witnessed with water and glycerin applications, respectively. Finally, employing a corneometer, hydration changes in the skin were monitored over 4 weeks. Although CS alone exhibited nominal alterations, the CS-Q complex and CS-R complex showed a significant increase in moisture levels after 4 weeks of application.

CONCLUSION

In this study, polyion complexes were successfully formed between CS, a sulfated GAG, and AA. Comparisons with glycerin, a well-known moisturizing agent, confirmed that the CS-AA complex exhibits superior moisturizing effects in various aspects. These findings suggest that the CS-AA complex is a more effective ingredient than CS or AA alone in terms of efficacy.

Paclitaxel-loaded elastic liposomes synthesised by microfluidics technique for enhance transdermal delivery

The inherent flexibility of elastic liposomes (EL) allows them to penetrate the small skin pores and reach the dermal region, making them an optimum candidate for topical drug delivery. Loading chemotherapy in ELs could improve chemotherapy's topical delivery and localise its effect on skin carcinogenic tissues. Chemotherapy-loaded EL can overcome the limitations of conventional administration of chemotherapies and control the distribution to specific areas of the skin. In the current studies, Paclitaxel was utilised to develop Paclitaxel-loaded EL. As an alternative to the conventional manufacturing methods of EL, this study is one of the novel investigations utilising microfluidic systems to examine the potential to enhance and optimise the quality of Els by the microfluidics method. The primary aim was to achieve EL with a size of < 200 nm, high homogeneity, high encapsulation efficiency, and good stability. A phospholipid (DOPC) combined with neutral and anionic edge activators (Tween 80 and sodium taurocholate hydrate) at various lipid-to-edge activator ratios, was used for the manufacturing of the ELs. A preliminary study was performed to study the size, polydispersity (PDI), and stability to determine the optimum microfluidic parameters and lipid-to-edge activator for paclitaxel encapsulation. Furthermore, physiochemical characterisation was performed on the optimised Paclitaxel-loaded EL using a variety of methods, including Dynamic Light Scattering, Fourier Transform Infrared Spectroscopy, Atomic force microscopy, elasticity, encapsulation efficiency, and In vitro release. The results reveal the microfluidics' significant impact in enhancing the EL characteristics of EL, especially small and controllable size, Low PDI, and high encapsulation efficiency. Moreover, the edge activator type and concentration highly affect the EL characteristics. The Tween 80 formulations with optimised concentration provide the most suitable size and higher encapsulation efficiency. The release profile of the formulations showed more immediate release from the EL with higher edge activator concentration and a higher % of the released dug from the Tween 80 formulations.

Lipid-based nanoparticles as a promising treatment for the skin cancer

The prevalence of skin disorders, especially cancer, is increasing worldwide. Several factors are involved in causing skin cancer, but ultraviolet (UV) light, including sunlight and tanning beds, are considered the leading cause. Different methods such as chemotherapy, radiotherapy, cryotherapy, and photodynamic therapy are mostly used for the skin cancer treatment. However, drug resistance and toxicity against cancer cells are related to these treatments. Lipid-nanoparticles have attracted significant interest as delivery systems due to non-invasive and targeted delivery based on the type of active drug. However, the stratum corneum, the outer layer of the skin, is inherently impervious to drugs. Due to their ability to penetrate the deep layers of the skin, skin delivery systems are capable of delivering drugs to target cells in a protected manner. The aim of this review was to examine the properties and applications of nanoliposomes used in the treatment and prevention of numerous types of skin cancer.

Zeta potential changing self-nanoemulsifying drug delivery systems: A newfangled approach for enhancing oral bioavailability of poorly soluble drugs

The mucus is a defensive barrier for different drug-loaded systems. To overcome this obstacle, the crucial factor is the surface charge. Due to mucus negative charge behavior; it was revealed that negatively charged formulations can move across mucus, whereas positively charged nanoformulations could not diffuse via mucus due to interactions. However, cellular intake of negatively charged nanoformulations to the epithelium by endocytosis is less prominent as compared to positively charged carriers. Self-emulsifying drug delivery systems (SEDDS) improve the drug permeability of drugs, especially which have poor oral drug solubility. Moreover, SEDDS have the ability to reduce the degradation of drugs in the GI tract. Currently, drug carrier systems that can shift zeta potential from negative to positive were developed. The benefits of inducing zeta potential changing approach are that negatively charged nanoformulations permeate quickly across the mucus and surface charges reversed to positive at epithelium surface to increase cellular uptake. Among various systems of drug delivery, zeta potential changing SEDDS seem to signify a promising approach as they can promptly diffuse over mucus due to their smaller size and shape distortion ability. Due to such findings, mucus permeation and drug diffusion may improve by the mixture of the zeta potential changing approach and SEDDS.

Co-delivery of amphotericin B and pentamidine loaded niosomal gel for the treatment of Cutaneous leishmaniasis

Topical drug delivery is preferable route over systemic delivery in case of Cutaneous leishmaniasis (CL). Among the available agents, amphotericin B (AmB) and pentamidine (PTM) showed promising result against CL. However, monotherapy is associated with incidences of reoccurrence and resistance. Combination therapy is therefore recommended. Thin film hydration method was employed for amphotericin B-pentamidine loaded niosomes (AmB-PTM-NIO) preparation followed by their incorporation into chitosan gel. The optimization of AmB-PTM-NIO was done via Box Behnken Design method and in vitro and ex vivo analysis was performed. The optimized formulation indicated 226 nm particle size (PS) with spherical morphology, 0.173 polydispersity index (PDI), -36 mV zeta potential (ZP) and with entrapment efficiency (EE) of 91% (AmB) and 79% (PTM), respectively. The amphotericin B-pentamidine loaded niosomal gel (AmB-PTM-NIO-Gel) showed desirable characteristics including physicochemical properties, pH (5.1 ± 0.15), viscosity (31870 ± 25 cP), and gel spreadability (280 ± 26.46%). In vitro release of the AmB and PTM from AmB-PTM-NIO and AmB-PTM-NIO-Gel showed more prolonged release behavior as compared to their respective drug solution. Higher skin penetration, greater percentage inhibition and lower IC50 against the promastigotes shows that AmB-PTM-NIO has better antileishmanial activity. The obtained findings suggested that the developed AmB-PTM-NIO-Gel has excellent capability of permeation via skin layers, sustained release profile and augmented anti-leishmanial outcome of the incorporated drugs.

Light controlled self-escape capability of non-cationic carbon nitride-based nanosheets in lysosomes for hepatocellular carcinoma targeting stimulus-responsive gene delivery

High positive charge-induced toxicity, easy lysosomal degradation of nucleic acid drugs, and poor lesion sites targeting are major problems faced in the development of gene carriers. Herein, we proposed the concept of self-escape non-cationic gene carriers for targeted delivery and treatment of photocontrolled hepatocellular carcinoma (HCC) with sufficient lysosome escape and multiple response capacities. Functional DNA was bound to the surface of biotin-PEG2000-modified graphitic carbon nitride (Bio-PEG-CN) nanosheets to form non-cationic nanocomplexes Bio-PEG-CN/DNA. These nanocomposites could actively target HCC tissue. Once these nanocomplexes were taken up by tumor cells, the accumulated reactive oxygen species (ROS) generated by Bio-PEG-CN under LED irradiation would disrupt the lysosome structure, thereby facilitating nanocomposites escape. Due to the acidic microenvironment and lipase in the HCC tissue, the reversible release of DNA could be promoted to complete the transfection process. Meanwhile, the fluorescence signal of Bio-PEG-CN could be monitored in real time by fluorescence imaging technology to investigate the transfection process and mechanism. In vitro and in vivo results further demonstrated that these nanocomplexes could remarkably upregulate the expression of tumor suppressor protein P53, increased tumor sensitivity to ROS generated by nanocarriers, and realized effective gene therapy for HCC via loading P53 gene.

Enhancement of ocular anti-glaucomic activity of agomelatine through fabrication of hyaluronic acid modified-elastosomes: formulation, statistical optimisation, in vitro characterisation, histopathological study, and in vivo assessment

AIM

The aim of this manuscript was to fabricate agomelatine (AGM) loaded elastosomes to improve its corneal permeation and ocular bioavailability. AGM is a biopharmaceutical classification system (BCS) class II with low water solubility and high membrane permeability. It has a potent agonistic action on melatonin receptors, so it is used for glaucoma treatment.

METHODS

Elastosomes were made using modified ethanol injection technique according to a 22 × 41 full factorial design. The chosen factors were: edge activators (EAs) type, surfactant percent (SAA %w/w), and cholesterol:surfactant ratio (CH:SAA ratio). The studied responses were encapsulation efficiency percent (EE%), mean diameter, polydispersity index (PDI), zeta potential (ZP), percentage of drug released after two hours (Q2h%), and 24 hours (Q24h%).

RESULTS

The optimum formula with the desirability of 0.752 was composed of Brij98 as EA type, 15%w/w SAA%, and 1:1 CH:SAA ratio. It revealed EE% of 73.22%w/v and mean diameter, PDI, ZP, Q2h%, and Q24h% values of 484.25 nm, 0.31, -30.75 mV, 32.7%w/v, and 75.6%w/v, respectively. It demonstrated acceptable stability for three months and superior elasticity than its conventional liposome. The histopathological study ensured the tolerability of its ophthalmic application. Also, it was proven to be safe from the results of the pH and refractive index tests. The in vivo pharmacodynamic parameters of the optimum formula revealed dominance in a maximum % decrease in intraocular pressure (IOP), the area under the IOP response curve, and mean residence time with the value of 82.73%w/v, 820.69%h, and 13.98 h compared to that of the AGM solution (35.92%w/v, 181.30%h, and 7.52 h).

CONCLUSIONS

Elastosomes can be a promising option to improve AGM ocular bioavailability.

Development and Evaluation of an Innovative Approach Using Niosomes Based Polymeric Microneedles to Deliver Dual Antioxidant Drugs

Ascorbic acid (AA) and caffeine (CAFF) work to protect cells from ultraviolet (UV) radiation and slow down the photoaging process of the skin. However, cosmetic application of AA and CAFF is limited due to poor penetration across the skin and rapid oxidation of AA. The aim of this study was to design and evaluate the dermal delivery of dual antioxidants utilizing microneedles (MNs) loaded with AA and CAFF niosomes. The niosomal nanovesicles were prepared using the thin film method and had particle sizes ranging from 130.6-411.2 nm and a negative Zeta potential of around -35 mV. The niosomal formulation was then combined with polyvinylpyrrolidone (PVP) and polyethylene glycol 400 (PEG 400) to create an aqueous polymer solution. The best skin deposition of AA and CAFF was achieved with the formulation containing 5% PEG 400 (M3) and PVP. Furthermore, the role of AA and CAFF as antioxidants in preventing cancer formation has been well-established. Here we validated the antioxidant properties of ascorbic acid (AA) and caffeine (CAFF) in a novel niosomal formulation referred to as M3 by testing its ability to prevent H₂O₂-indued cell damage and apoptosis in MCF-7 breast cancer cells. Results showed that M3 was able to shield MCF-7 cells from H₂O₂ induced damage at concentrations below 2.1 µg/mL for AA and 1.05 µg/mL for CAFF, and also exhibited anticancer effects at higher concentrations of 210 µg/mL for AA and 105 µg/mL. The formulations were stable for two months at room temperature in terms of moisture and drug content. The use of MNs and niosomal carriers could be a promising approach for dermal delivery of hydrophilic drugs like AA and CAFF.

Formulation and Characterization of Epalrestat-Loaded Polysorbate 60 Cationic Niosomes for Ocular Delivery

The aim of this work was to develop niosomes for the ocular delivery of epalrestat, a drug that inhibits the polyol pathway and protects diabetic eyes from damage linked to sorbitol production and accumulation. Cationic niosomes were made using polysorbate 60, cholesterol, and 1,2-di-O-octadecenyl-3-trimethylammonium propane. The niosomes were characterized using dynamic light scattering, zeta-potential, and transmission electron microscopy to determine their size (80 nm; polydispersity index 0.3 to 0.5), charge (-23 to +40 mV), and shape (spherical). The encapsulation efficiency (99.76%) and the release (75% drug release over 20 days) were measured with dialysis. The ocular irritability potential (non-irritating) was measured using the Hen's Egg Test on the Chorioallantoic Membrane model, and the blood glucose levels (on par with positive control) were measured using the gluc-HET model. The toxicity of the niosomes (non-toxic) was monitored using a zebrafish embryo model. Finally, corneal and scleral permeation was assessed with the help of Franz diffusion cells and confirmed with Raman spectroscopy. Niosomal permeation was higher than an unencapsulated drug in the sclera, and accumulation in tissues was confirmed with Raman. The prepared niosomes show promise to encapsulate and carry epalrestat through the eye to meet the need for controlled drug systems to treat the diabetic eye.

Qbd-Based Approach to Optimize Niosomal Gel of Levosulpiride for Transdermal Drug Delivery

Poor aqueous solubility besides extensive hepatic first effect significantly decreases the oral absorption of levosulpiride, which in turn minimizes its therapeutic effectiveness. Niosomes have been extensively investigated as a transdermal vesicular nanocarrier to increase the delivery of low permeable compounds into and across the skin. This research work was to design, develop and optimize levosulpiride-loaded niosomal gel and to evaluate its prospects for transdermal delivery. The Box-Behnken design was used to optimize niosomes by analyzing the impact of three factors (cholesterol; X1, Span 40; X2, and sonication time; X3) on the responses (particle size, Y1, and entrapment efficiency, Y2). Optimized formulation (NC) was incorporated into gel and evaluated for pharmaceutical properties, drug release study, ex vivo permeation, and in vivo absorption. The design experiment data suggest that all three independent variables influence both response variables significantly (p < 0.01). Pharmaceutical characteristics of NC vesicles showed the absence of drug excipient interaction, nanosize (~102.2 nm), narrow distribution (~0.218), adequate zeta potential (−49.9 mV), and spherical shape, which are suitable for transdermal therapy. The levosulpiride release rates varied significantly (p < 0.01) between niosomal gel formulation and control. Greater flux (p < 0.01) was observed with levosulpiride-loaded niosomal gel than with control gel formulation. Indeed, the drug plasma profile of niosomal gel was significantly higher (p < 0.005), with ~3 folds higher Cmax and greater bioavailability (~500% higher; p < 0.0001) than its counterpart. Overall, these findings imply that the use of an optimized niosomal gel formulation can increase the therapeutic efficacy of levosulpiride and may represent a promising alternative to conventional therapy.

On the relationship between the properties of planar structures of non-ionic surfactants and their vesicular analogues - Niosomes

In recent years, the study of niosomes as nanocarriers alternative to liposomes has received increasing attention. In contrast to well-studied liposome membranes, many aspects of the behavior of analogous niosome bilayers have not been studied. This paper considers one of these aspects related to the communication between the physicochemical properties of planar and vesicular objects. We present the first results of comparative studies of Langmuir monolayers of binary and ternary (with cholesterol) mixtures of non-ionic surfactants based on sorbitan esters and niosomal structures assembled from the same materials. The Thin-Film Hydration (TFH) method in the gentle shaking version was used to produce the particles of large sizes, while small unilamellar high quality vesicles with a unimodal distribution of particles were prepared by TFH using ultrasonic treatment and extrusion. An analysis of the structural organization and phase state of monolayers based on compression isotherms and supplemented by thermodynamic calculations, as well as the results of determining the particle morphology, polarity and microviscosity of niosome shells, made it possible to obtain fundamental data on the intermolecular interactions of the components and their packing in shells and to relate these data to the properties of niosomes. This relationship can be used to optimize the composition of niosome membranes and predict the behavior of these vesicular systems. It was shown that cholesterol excess creates regions of bilayers with increased rigidity (like "lipid rafts"), which hinders the process of folding film fragments into small niosomes.

Nanovesicles as Vanillin Carriers for Antimicrobial Applications

Vanillin is a natural compound easily extracted from plants. It has neuroprotective, anti-carcinogenic, antioxidant, antimicrobial, and anti-biofilm properties. It also presents high volatility, high hydrophilicity, and low bioavailability. Nanomaterials can be used to improve pharmacodynamics, solubility, and stability and to enhance pharmacokinetics. In this work, non-ionic surfactant vesicles were synthesized as vanillin carriers: neutral niosomes formed by Span60 and cholesterol, positive charged niosomes formulated with cetyltrimethylammonium bromide (CTAB), and negatively charged niosomes formulated with sodium dodecyl sulfate (SDS). Niosomes synthesis was carried out with two commonly used methods: thin film hydration (TFH) and ethanol injection method (EIM). The niosomes synthesized were used to prepare two different materials: (i) a powder containing the lyophilized noisome with vanillin systems and (ii) a gelatin matrix film containing niosomes with vanillin. Lyophilization was carried out using maltodextrin as a cryoprotectant. The lyophilization of colloidal structures allows for storage at room temperature for long periods of time, keeping their organoleptic characteristics invariable. Niosomes were characterized before and after the lyophilization process in terms of morphological characterization, size, polydispersity index (PDI), and zeta potential. Moreover, niosomes cargo was evaluated by calculating the encapsulation efficiency (EE) and loading capacity (LC). Results showed that the use of the TFH method allowed us to obtain niosomes of 255 nm with high EE (up to 40%) and LC values higher than EIM. The lyophilization process decreased the LC of the vesicles prepared, but this decrease was mitigated by up to 20% when ionic surfactants were used on the membrane bilayer. Gelatin films are biodegradable materials suitable for food packing applications. The incorporation of a natural compound with antimicrobial activity would be a clear advantage for such an application. The films prepared were characterized in terms of morphology, water solubility, color, and transparency. Niosomes synthesized by thin film hydration had better chemical and physical properties to load vanillin. Especially in the case of application in films, niosomes with a negative charge, formed by SDS, and vanillin loaded gave better mechanical and chemical characteristics to the film.

Improved Topical Drug Delivery: Role of Permeation Enhancers and Advanced Approaches

The delivery of drugs via transdermal routes is an attractive approach due to ease of administration, bypassing of the first-pass metabolism, and the large skin surface area. However, a major drawback is an inability to surmount the skin's stratum corneum (SC) layer. Therefore, techniques reversibly modifying the stratum corneum have been a classical approach. Surmounting the significant barrier properties of the skin in a well-organised, momentary, and harmless approach is still challenging. Chemical permeation enhancers (CPEs) with higher activity are associated with certain side effects restricting their advancement in transdermal drug delivery. Furthermore, complexity in the interaction of CPEs with the skin has led to difficulty in elucidating the mechanism of action. Nevertheless, CPEs-aided transdermal drug delivery will accomplish its full potential due to advancements in analytical techniques, synthetic chemistry, and combinatorial studies. This review focused on techniques such as drug-vehicle interaction, vesicles and their analogues, and novel CPEs such as lipid synthesis inhibitors (LSIs), cell-penetrating peptides (CPPs), and ionic liquids (ILs). In addition, different types of microneedles, including 3D-printed microneedles, have been focused on in this review.

Preparation, Characterization, and Evaluation of Curcumin-Graphene Oxide Complex-Loaded Liposomes against Staphylococcus aureus in Topical Disease

This study describes the development and characterization of curcumin with graphene oxide complex (CUR + GO) loaded into liposomes for treating skin disease. The developed complex was characterized by X-ray diffraction and showed a broad halo pattern, confirming the amorphous nature of the resulting complex. Furthermore, scanning electron microscopy revealed the irregular porous morphology of the complex-highlighting loss of the crystallinity and the emergence of the amorphous phase. Additionally, the liposomes showed long-term stability at 2-8 °C and 25 ± 2 °C/60 ± 5%RH with nonsignificant variations in the particle size, polydispersity index, and zeta potential. Overall, optical and high-resolution transmission electron microscopy images of liposomes showed a consistent shape, and no aggregation with uniform particle size distribution was observed. Furthermore, the cumulative drug release in the first 6 h was 71.24 and 64.24% for CUR-loaded liposomes and CUR-GO-loaded liposomes, respectively. The lower value of drug release might be attributed to the complex development. The drug release model found the first order with non-Fickian diffusion process, which is often observed at higher n > 0.5. The antibacterial activity of the CUR with GO-loaded liposome (D2) offered higher anti-microbial activity over other formulations against the mentioned bacterial microorganism that causes skin diseases.

Silk peptide-hyaluronic acid based nanogels for the enhancement of the topical administration of curcumin

The present study focused on the development of Cur-loaded SOHA nanogels (Cur-SHNGs) to enhance the topical administration of Cur. The physiochemical properties of Cur-SHNGs were characterized. Results showed that the morphology of the Cur-SHNGs was spherical, the average size was 171.37 nm with a zeta potential of −13.23 mV. Skin permeation experiments were carried out using the diffusion cell systems. It was found that the skin retention of Cur-SHNGs was significantly improved since it showed the best retention value (0.66 ± 0.17 μg/cm²). In addition, the hematoxylin and eosin staining showed that the Cur-SHNGs improved transdermal drug delivery by altering the skin microstructure. Fluorescence imaging indicated that Cur-SHNGs could effectively deliver the drug to the deeper layers of the skin. Additionally, Cur-SHNGs showed significant analgesic and anti-inflammatory activity with no skin irritation. Taken together, Cur-SHNGs could be effectively used for the topical delivery of therapeutic drugs.

Preparation, Characterization and Pharmacokinetics of Tolfenamic Acid-Loaded Solid Lipid Nanoparticles

The clinical use of nonsteroidal anti-inflammatory drugs is limited by their poor water solubility, unstable absorption, and low bioavailability. Solid lipid nanoparticles (SLNs) exhibit high biocompatibility and the ability to improve the bioavailability of drugs with low water solubility. Therefore, in this study, a tolfenamic acid solid lipid nanoparticle (TA-SLN) suspension was prepared by a hot melt–emulsification ultrasonication method to improve the sustained release and bioavailability of TA. The encapsulation efficiency (EE), loading capacity (LC), particle size, polydispersity index (PDI), and zeta potential of the TA-SLN suspension were 82.50 ± 0.63%, 25.13 ± 0.28%, 492 ± 6.51 nm, 0.309 ± 0.02 and −21.7 ± 0.51 mV, respectively. The TA-SLN suspension was characterized by dynamic light scattering (DLS), fluorescence microscopy (FM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared (FT-IR) spectroscopy. The TA-SLN suspension showed improved sustained drug release in vitro compared with the commercially available TA injection. After intramuscular administration to pigs (4 mg/kg), the TA-SLN suspension displayed increases in the pharmacokinetic parameters T_max, T_1/2, and MRT_0–∞ by 4.39-, 3.78-, and 3.78-fold, respectively, compared with TA injection, and showed a relative bioavailability of 185.33%. Thus, this prepared solid lipid nanosuspension is a promising new formulation.

Sustainable Release of Propranolol Hydrochloride Laden with Biconjugated-Ufasomes Chitosan Hydrogel Attenuates Cisplatin-Induced Sciatic Nerve Damage in In Vitro/In Vivo Evaluation

Peripheral nerve injuries significantly impact patients' quality of life and poor functional recovery. Chitosan-ufasomes (CTS-UFAs) exhibit biomimetic features, making them a viable choice for developing novel transdermal delivery for neural repair. This study aimed to investigate the role of CTS-UFAs loaded with the propranolol HCl (PRO) as a model drug in enhancing sciatica in cisplatin-induced sciatic nerve damage in rats. Hence, PRO-UFAs were primed, embedding either span 20 or 60 together with oleic acid and cholesterol using a thin-film hydration process based on full factorial design (24). The influence of formulation factors on UFAs' physicochemical characteristics and the optimum formulation selection were investigated using Design-Expert® software. Based on the optimal UFA formulation, PRO-CTS-UFAs were constructed and characterized using transmission electron microscopy, stability studies, and ex vivo permeation. In vivo trials on rats with a sciatic nerve injury tested the efficacy of PRO-CTS-UFA and PRO-UFA transdermal hydrogels, PRO solution, compared to normal rats. Additionally, oxidative stress and specific apoptotic biomarkers were assessed, supported by a sciatic nerve histopathological study. PRO-UFAs and PRO-CTS-UFAs disclosed entrapment efficiency of 82.72 ± 2.33% and 85.32 ± 2.65%, a particle size of 317.22 ± 6.43 and 336.12 ± 4.9 nm, ζ potential of -62.06 ± 0.07 and 65.24 ± 0.10 mV, and accumulatively released 70.95 ± 8.14% and 64.03 ± 1.9% PRO within 6 h, respectively. Moreover, PRO-CTS-UFAs significantly restored sciatic nerve structure, inhibited the cisplatin-dependent increase in peripheral myelin 22 gene expression and MDA levels, and further re-established sciatic nerve GSH and CAT content. Furthermore, they elicited MBP re-expression, BCL-2 mild expression, and inhibited TNF-α expression. Briefly, our findings proposed that CTS-UFAs are promising to enhance PRO transdermal delivery to manage sciatic nerve damage.

Safety of Lavender Oil-Loaded Niosomes for In Vitro Culture and Biomedical Applications

(1) Background: Essential oils have long been used as therapeutic agents. Lavender (Lavandula angustifolia) oil (LO) is an antispasmodic, anticonvulsant, relaxant, painkilling, and antimicrobial essential oil investigated as a natural substance for biomedical therapies. Nanoparticles have shown significant promise in improving drug delivery and efficacy. Considering these benefits, the aim of this study was to evaluate the toxicity of LO and lavender oil niosomes (LONs) in stem cells and myofibroblast models cultured in vitro. (2) Methods: Adipose tissue-derived stem cells and myometrial cells were cultured with LO or LONs at different concentrations (0, 0.016%, 0.031%, and 0.063%) and toxicity was evaluated with PrestoBlue™ and live/dead assay using calcein and ethidium homodimer. (3) Results: Cell viability was similar to controls in all groups, except in 0.063% LO for myometrial cells, which showed lower viability than the control medium. (4) Conclusion: These results suggest that both LO and LONs are safe for cell culture and may be used for pharmaceutical and biomedical therapies in future applications in regenerative medicine.

A state-of-the-art review on the recent advances of niosomes as a targeted drug delivery system

The buildup of nonionic surfactants in the aqueous environment produces niosomes. The usage of niosomes is becoming increasingly frequent due to their sustainability, low cost of components and assembly, large-scale manufacture, and, finally, easy maintenance of the niosomes to the other. Because of their nonionic characteristics, niosomes play a critical role in medication delivery systems. Controlled release and targeted distribution of niosomes to treat cancer, infectious illnesses, and other disorders are one of their most important properties. Niosomes can also be injected by ocular and transdermal routes, which are less common than oral and parenteral administration. Using niosomes to manufacture biotechnology goods and novel vaccines is one of the most exciting research fields today. The molecular structure of niosomes, the physicochemical characteristics of nonionic surfactants in their formulation, the influence of external stimuli on niosomes, the many methods of niosomes administration, and their diverse therapeutic qualities are all explored in this study.

Myricetin loaded nano-micelles delivery system reduces bone loss induced by ovariectomy in rats through inhibition of osteoclast formation

In recent years, much attention has been paid to the therapeutic effects of phytochemicals on osteoporosis. Other studies have shown that myricetin (MY) could promote osteogenic activity and inhibit osteoclastic effect, albeit little is known about effect of MY micellar system on osteoporosis. Therefore, we sought to discuss the therapeutic effect and mechanism of MY-loaded bone-targeting micelles on osteoporosis induced by ovariectomy (OVA) in rats. The AL-P(LLA-CL)-PEG-P(LLA-CL)-MY micelles were prepared via ethanol injection method, while in vitro release study, bone targeting, pharmacokinetic studies, and the effect on proliferation of osteoblasts were investigated. Further, the therapeutic effect on osteoporosis was studied through ovariectomized rats. Compared with free MY, oral bioavailability of AL-P(LLA-CL)-PEG-P(LLA-CL)-MY micelles in rats was increased by 3.54 times. The AL-P(LLA-CL)-PEG-P(LLA-CL)-MY micelles exhibited bone targeting potential, and could significantly increase the activity of alkaline phosphatase and promote the proliferation of osteoblasts. Importantly, AL-P(LLA-CL)-PEG-P(LLA-CL)-MY micelles mainly regulated bone metabolism by inhibiting bone resorption, thereby improving the symptoms of osteoporosis in OVA rats. The AL-P(LLA-CL)-PEG-P(LLA-CL)-MY micelles substantially enhanced the oral bioavailability of MY and demonstrated good bone targeting capability, thereby suggesting its prospect as carrier for osteoporotic improvement in OVA rats.

D-optimal mixture design for optimization of topical dapsone niosomes: in vitro characterization and in vivo activity against Cutibacterium acnes

This study aimed to illustrate the use of D-optimal mixture design (DOMD) for optimization of an enhancer containing Dapsone niosomal formula for acne topical treatment. Mixture components (MixCs) studied were: Span 20, Cholesterol, and Cremophor RH. Different responses were measured. Optimized formula (OF) was selected to minimize particle size and maximize absolute zeta potential and entrapment efficiency. Optimized formula gel (OF-gel) was prepared and characterized. OF-gel in vivo skin penetration using confocal laser scanning microscopy and activity against Cutibacterium acnes in acne mouse model were studied. Based on DOMD results analysis, adequate models were derived. Piepel and contour plots were plotted accordingly to explain how alteration in MixCs L-pseudo values affected studied responses and regions for different responses’ values. The OF had suitable predicted responses which were in good correlation with the actually measured ones. The OF-gel showed suitable characterization and in vivo skin penetration up to the dermis layer. In vivo acne mouse-model showed that OF-gel-treated group (OF-gel-T-gp) had significantly better recovery (healing) criteria than untreated (UT-gp) and Aknemycin^®-treated (A-T-gp) groups. This was evident in significantly higher reduction of inflammation percent observed in OF-gel-T-gp than both UT-gp and A-T-gp. Better healing in OF-gel-T-gp compared with other groups was also verified by histopathological examination. Moreover, OF-gel-T-gp and A-T-gp bacterial loads were non-significantly different from each other but significantly lower than UT-gp. Thus, DOMD was an adequate statistical tool for optimization of an appropriate enhancer containing Dapsone niosomal formula that proved to be promising for topical treatment of acne.

Research Progress and Trends of Phenylethanoid Glycoside Delivery Systems

Background: Phenylethanoid glycosides (PhGs) are obtained from a wide range of sources and show strong biological and pharmacological activities, such as antioxidant, antibacterial and neuroprotective effects. However, intestinal malabsorption and the low bioavailability of PhGs seriously affect their application. Delivery systems are an effective method to improve the bioavailability of active substances. Scope and approach: In this article, the biological activities of and delivery systems for PhGs are introduced. The application statuses of delivery systems for echinacoside, acteoside and salidroside are reviewed. Finally, the problems of the lack of uniform standards for delivery systems and the poor targeted delivery accuracy of PhGs in the current research are proposed and suggestions for future research are put forward based on those problems. Key findings and conclusions: Although there are still some problems in the delivery system of phenylethanoside, such as inconsistent standards and inaccurate delivery, phenylethanoside itself has been proven to have a variety of physiological activities. Therefore, the action mechanism and application of phenylethanoside and its delivery system should be studied further.

Niosome-encapsulated Doxycycline hyclate for Potentiation of Acne Therapy: Formulation and Characterization

BACKGROUND

Acne is the pilosebaceous units' disorder. The most important cause of acne is the colonization of bacteria in the follicles. Among antibiotics, doxycycline hyclate kills a wide range of bacteria.

OBJECTIVES

To prevent oral administration's side effects, overcome the barriers of conventional topical treatment, and improve the therapeutic effectiveness, this drug was loaded into niosomal nanocarriers for topical application.

METHODS

Doxycycline hyclate was loaded into four niosomal formulations prepared by the thin-film hydration method with different percentages of constituents. Drug-containing niosomal systems were evaluated for morphological properties via scanning electron microscopy, particle size, drug entrapment efficiency, zeta potential, in vitro drug release, physical stability after 60 days, in vitro drug permeation through rat skin, in vitro drug deposition in rat skin, toxicity on human dermal fibroblasts (HDF) by MTT method after 72 hours, and antibacterial properties against the main acne-causing bacteria via antibiogram test.

RESULTS

The best formulation had the appropriate particle size of 362.88 ± 13.05 nm to target follicles, entrapment efficiency of 56.3 ± 2.1%, the zeta potential of - 24.46±1.39 mV, in vitro drug release of 54.93 ± 1.99% after 32 hours, and the lowest permeation of the drug through the rat skin among all other formulations. Improved cell viability, increased antibacterial activity, and an approximately three-fold increase in drug deposition were the optimal niosomal formulation features relative to the free drug.

CONCLUSION

This study demonstrated the ability of nano-niosomes containing doxycycline hyclate to treat skin acne compared with the free drug.

Formulation and Evaluation of Topical Nano-Lipid-Based Delivery of Butenafine: In Vitro Characterization and Antifungal Activity

The present research work was designed to prepare butenafine (BN)-loaded bilosomes (BSs) by the thin-film hydration method. BN is a sparingly water-soluble drug having low permeability and bioavailability. BSs are lipid-based nanovesicles used to entrap water-insoluble drugs for enhanced permeation across the skin. BSs were prepared by the thin-film hydration method and optimized by the Box-Behnken design (BBD) using lipid (A), span 60 (B), and sodium deoxycholate (C) as independent variables. The selected formulation (BN-BSo) was converted into the gel using Carbopol 940 as a gelling agent. The prepared optimized gel (BN-BS-og) was further evaluated for the gel characterization, drug release, drug permeation, irritation, and anti-fungal study. The optimized bilosomes (BN-BSo) showed a mean vesicle size of 215 ± 6.5 nm and an entrapment efficiency of 89.2 ± 1.5%. The DSC study showed that BN was completely encapsulated in the BS lipid matrix. BN-BSog showed good viscosity, consistency, spreadability, and pH. A significantly (p < 0.05) high release (81.09 ± 4.01%) was achieved from BN-BSo compared to BN-BSog (65.85 ± 4.87%) and pure BN (17.54 ± 1.37 %). The permeation study results revealed that BN-BSo, BN-BSog, and pure BN exhibited 56.2 ± 2.7%, 39.2 ± 2.9%, and 16.6 ± 2.3%. The enhancement ratio of permeation flux was found to be 1.4-fold and 3.4-fold for the BN-BS-og and pure BN dispersion. The HET-CAM study showed that BN-BSog was found to be nonirritant as the score was found within the limit. The antifungal study revealed a significant (p < 0.05) enhanced antifungal activity against C. albicans and A. niger. The findings of the study revealed that BS is an important drug delivery system for transdermal delivery.

Preparation, characterization, pharmacokinetics, and antirenal injury activity studies of Licochalcone A-loaded liposomes

A liposome of Licochalcone A (LCA-Liposomes) was purposively prepared to ameliorate the low in vivo availability and efficacy of LCA. Physical characterization of LCA-Liposomes was carried out mainly by determining particle size, morphology, zeta potential (Z-potential), and efficiency of LCA encapsulation (EE) via appropriate techniques. Also, the rate of LCA release in vitro and distribution in vivo (plasma and tissues) was evaluated. Evaluation of the antirenal activity of LCA-liposomes was carried out by establishing chronic renal failure (CRF) model in mice through intragastric administration of adenine (200 mg/kg) and subsequent determination of biochemical parameters and examination of tissue sections. Respectively, the mean size of liposomal particles, Z-potential and EE of LCA-Liposomes were 71.78 ± 0.99 nm, -38.49 ± 0.06 mV, and 97.67 ± 1.72%. Pharmacokinetic and tissue distribution studies showed that LCA-Liposomes could improve the availability of LCA in the blood and tissues, whereas during pharmacodynamics studies, the liposome effectively improved the therapeutic effect of LCA on CRF mice by potentially protecting the renal tissues while exhibiting antioxidant activity. In conclusion, LCA-Liposomes could effectively improve the bioavailability of LCA and provide platform for the development of LCA-related functional products. PRACTICAL APPLICATIONS: As a traditional Chinese medicine, licorice is widely used in food and pharmaceutical industries. LCA is a small molecule flavonoid extracted from the root of licorice. In this study, LCA was loaded on liposome carriers, which significantly improved the water solubility and oral bioavailability, and proved that LCA-Liposomes have certain therapeutic effects on chronic renal failure, thereby providing a basis for the development of LCA into drugs or functional food in the future.

The technology of transdermal delivery nanosystems: from design and development to preclinical studies

Transdermal administration has gained much attention due to the remarkable advantages such as patient compliance, drug escape from first-pass elimination, favorable pharmacokinetic profile and prolonged release properties. However, the major limitation of these systems is the limited skin penetration of the stratum corneum, the skin's most important barrier, which protects the body from the insertion of substances from the environment. Transdermal drug delivery systems are aiming to the disruption of the stratum corneum in order for the active pharmaceutical ingredients to enter successfully the circulation. Therefore, nanoparticles are holding a great promise because they can act as effective penetration enhancers due to their small size and other physicochemical properties that will be analyzed thoroughly in this report. Apart from the investigation of the physicochemical parameters, a comparison between the different types of nanoparticles will be performed. The complexity of skin anatomy and the unclear mechanisms of penetration should be taken into consideration to reach some realistic conclusions regarding the way that the described parameters affect the skin permeability. To the best of the authors knowledge, this is among the few reports on the literature describing the technology of transdermal delivery systems and how this technology affects the biological activity.

Evaluation of sonication on stability-indicating properties of optimized pilocarpine hydrochloride-loaded niosomes in ocular drug delivery

Niosomes are increasingly explored for enhancing drug penetration and retention in ocular tissues for both posterior and anterior eye delivery. They have been employed in encapsulating both hydrophilic and hydrophobic drugs, but their use is still plagued with challenges of stability and poor entrapment efficiency particularly with hydrophilic drugs. As a result, focus is on understanding the parameters that affect their stability and their optimization for improved results. Pilocarpine hydrochloride (HCl), a hydrophilic drug is used in the management of intraocular pressure in glaucoma. We aimed at optimizing pilocarpine HCl niosomes and evaluating the effect of sonication on its stability-indicating properties such as particle size, polydispersity index (PDI), zeta potential and entrapment efficiency. Pilocarpine niosomes were prepared by ether injection method. Composition concentrations were varied and the effects of these variations on niosomal properties were evaluated. The effects of sonication on niosomes were determined by sonicating optimized drug-loaded formulations for 30 min and 60 min. Tween 60 was confirmed to be more suitable over Span 60 for encapsulating hydrophilic drugs, resulting in the highest entrapment efficiency (EE) and better polydispersity and particle size indices. Optimum sonication duration as a process variable was determined to be 30 min which increased EE from 24.5% to 42% and zeta potential from (-)14.39 ± 8.55 mV to (-)18.92 ± 7.53 mV. In addition to selecting the appropriate surfactants and varying product composition concentrations, optimizing sonication parameters can be used to fine-tune niosomal properties to those most desirable for extended eye retainment and maintenance of long term stability.

Elastic and Ultradeformable Liposomes for Transdermal Delivery of Active Pharmaceutical Ingredients (APIs)

Administration of active pharmaceutical ingredients (APIs) through the skin, by means of topical drug delivery systems, is an advanced therapeutic approach. As the skin is the largest organ of the human body, primarily acting as a natural protective barrier against permeation of xenobiotics, specific strategies to overcome this barrier are needed. Liposomes are nanometric-sized delivery systems composed of phospholipids, which are key components of cell membranes, making liposomes well tolerated and devoid of toxicity. As their lipid compositions are similar to those of the skin, liposomes are used as topical, dermal, and transdermal delivery systems. However, permeation of the first generation of liposomes through the skin posed some limitations; thus, a second generation of liposomes has emerged, overcoming permeability problems. Various mechanisms of permeation/penetration of elastic/ultra-deformable liposomes into the skin have been proposed; however, debate continues on their extent/mechanisms of permeation/penetration. In vivo bioavailability of an API administered in the form of ultra-deformable liposomes is similar to the bioavailability achieved when the same API is administered in the form of a solution by subcutaneous or epi-cutaneous injection, which demonstrates their applicability in transdermal drug delivery.

Cholesterol and phospholipid-free multilamellar niosomes regulate transdermal permeation of a hydrophobic agent potentially administrated for treating diseases in deep hair follicles

We designed cholesterol- and phospholipid-free multilamellar niosomes (MLNs) structured by glyceryl monooleate (GMO) and poloxamer 407 (F127), and evaluated their capacity for transdermal drug delivery. The optimized MLNs had a mean size of 97.88 ± 63.25 nm and an encapsulation efficiency of 82.68% ± 2.14%. Notably, the MLNs exhibited a remarkable sustained cargo release. Compared with the tincture, lower transdermal flux but higher skin deposition of aconitine in vitro were achieved in the MLN group (p < 0.05). We further found that MLNs improved the permeability of the stratum corneum. Additionally, both water-soluble rhodamine B- and liposoluble coumarin 6-labeled MLNs were found to penetrate deeply into the skin through the hair follicles and could be internalized by fibroblasts (CCC-ESF-1). The MLNs possessed greater wettability, and the study focused on delivery to deeper hair follicles and up to the outer hair sheath, which showed advantages for treating diseases of hair follicles, and was potentially superior to the hydrophobic PLGA nanoparticles (diameter: 637.87 ± 22.77 nm) which mainly accumulated in superficial hair follicles. Hair follicles were therefore demonstrated to be an important way to enhance skin permeability, and MLNs are a promising alternative for topical and transdermal drug delivery.

Methods for preparation of niosomes: A focus on thin-film hydration method

Development of nanocarriers has opened new avenues for the delivery of therapeutics of various pharmacological activities with improved targeting properties and reduced side effects. Niosomes, non-ionic-based vesicles, have drawn much interest in various biomedical applications, owing to their unique characteristics and their ability to encapsulate both hydrophilic and lipophilic cargoes. Niosomes share structural similarity with liposomes while overcoming limitations associated with stability, sterilization, and large-scale production of liposomes. Different methods for preparation of niosomes have been described in the literature, each having its own merits and a great impact on the sizes and characteristics of the formed niosomes. In this article, procedures involved in the thin-film hydration method, a commonly used method for the preparation of niosomes, are described in detail, while highlighting precautions that should be considered for consistent and reproducible construction of niosomes.

Development and evaluation of proniosomes to enhance the transdermal delivery of cilostazole and to ensure the safety of its application

Cilostazole (CLZ) is an anti-platelet drug that suffers from extensive first-pass metabolism and gastrointestinal side effects. This study aimed to prepare proniosomes for enhancing the transdermal delivery of CLZ to avoid its oral problems. proniosomes were prepared by a coacervation phase separation technique according to the D-optimal design to investigate the effect of formulation variables on entrapment efficiency (EE%), particle size (PS), zeta potential (ZP), and the percent of the drug released after 2 and 24 h (Q2 and 24 h). The desirability criterion is set to select the optimum formula. The optimum formula(opt) with a desirability value (0.75), composed of 540 mg Span60 and 59.7 mg of cholesterol, had the highest EE% of (75.125 ± 0.125%), PS of (300.3 ± 0.2 nm), ZP of (-39.35 ± 0.15 mV), Q2h of (24.32 ± 0.13%) and Q24h of (81.175 ± 0.325%). Further, the opt-gel was prepared by using hydroxy propyl methyl cellulose (HPMC K4M). The opt-formula was subjected to an ex-vivo permeation study and showed a marked increase in drug flux of (22.89 ± 0.1 µg/cm².h). The opt-gel was subjected to an in-vitro release study in comparison with the opt-formula that showed a more sustained release effect. The histopathological examination study confirmed the safety of the topical application of proniosomes. The CLZ-loaded proniosomes showed promising results with high potential to deliver it across the skin.

Optimization of propofol loaded niosomal gel for transdermal delivery

Propofol is an oily liquid widely used for rapid onset of anaesthesia via intravenous route, which shows major limitations of hypersensitivity, anaphylactic reactions and pain. The aim of the present work was to bypass the above issues by formulating tailored niosomal gel to deliver propofol via non-invasive transdermal route. The niosomes were prepared by film hydration method and sonication using cholesterol and Span 80. The Box Behnken design (BBD) was applied to optimize the size (93.5 nm) and the entrapment efficacy (81.5%) of the niosomes by selecting cholesterol at 139 mg, Span 80 at 0.525% and sonication time at 5.13 min. The scanning electron microscopy image showed spherical shape niosomes with smooth surface without aggregation. The ex vivo release data showed significant improvement in the propofol release (92.2% after 10 h) using niosomes in comparison to the control propofol gel (with 30% methanol) without niosomes (25.3% after 10 h). The in vivo pharmacokinetic parameters in the rat model confirmed the improvement in the relative bioavailability with optimized niosomal gel (relative bioavailability = 12.12) in comparison to the control propofol gel. In conclusion, the niosomal gel offered a potential alternative non-invasive route to deliver propofol for procedural sedation especially in pediatric population.

Enhancement strategies for transdermal drug delivery systems: current trends and applications

Transdermal drug delivery systems have become an intriguing research topic in pharmaceutical technology area and one of the most frequently developed pharmaceutical products in global market. The use of these systems can overcome associated drawbacks of other delivery routes, such as oral and parenteral. The authors will review current trends, and future applications of transdermal technologies, with specific focus on providing a comprehensive understanding of transdermal drug delivery systems and enhancement strategies. This article will initially discuss each transdermal enhancement method used in the development of first-generation transdermal products. These methods include drug/vehicle interactions, vesicles and particles, stratum corneum modification, energy-driven methods and stratum corneum bypassing techniques. Through suitable design and implementation of active stratum corneum bypassing methods, notably microneedle technology, transdermal delivery systems have been shown to deliver both low and high molecular weight drugs. Microneedle technology platforms have proven themselves to be more versatile than other transdermal systems with opportunities for intradermal delivery of drugs/biotherapeutics and therapeutic drug monitoring. These have shown that microneedles have been a prospective strategy for improving transdermal delivery systems.