Enhancement of abiraterone acetate oral bioavailability by supersaturated-silica lipid hybrids

Exploration of Abiraterone acetate loaded Nanostructured lipid carriers for bioavailability improvement and circumvention of fast-fed variability

Abiraterone acetate (ABA), a biopharmaceutical class IV drug suffers from solubility and permeability pitfalls resulting in limited oral bioavailability and positive food effect, i.e. multi-fold enhancement in drug absorption in the presence of food. This poses difficulties to physicians towards the estimation of dose and dosage regimen required for efficacious therapy of prostate cancer (PCa). Nanostructured lipid carriers (NLC) have demonstrated tremendous outcomes in enhancing the oral bioavailability of various entities along with food effect attenuation. In this study, Quality by design and multivariate analysis was employed for optimization of ABA loaded NLC (ABA NLC). The optimal size, PDI and zeta potential obtained using QbD were 134.6 nm, 0.163 and -15.7 mV respectively. Ex vivo qualitative and quantitative intestinal permeability studies demonstrated improved traversion of NLC through the intestinal segments. In vitro dissolution profile in biorelevant fast and fed gastric and intestinal media revealed minimal differences for ABA NLC compared to ABA. In vivo pharmacokinetics was performed to decipher the efficacy of ABA NLC in mitigating the food effect of ABA. The studies demonstrated 14.51-fold and 1.94-fold improvement in oral bioavailability during fasted and fed state respectively as compared to free ABA. The absorption mechanism of ABA NLC using chylomicron flow blocking approach conveyed lymphatic uptake as the major mechanism. Cmax fast/fed ratio was 0.9758 whereas, AUC fast/fed ratio was 0.9386, which being nearly equivalent, confirmed the food effect attenuation. Therefore, the results of the study demonstrate optimal pharmacokinetics of ABA NLC and its utility in circumventing the fast fed variability.

Synthesis and Biological Evaluation of Methoxypolyethylene-Glycol-Substituted Abiraterone Derivatives as Potential Antiprostate Cancer Agents

Globally, prostate cancer is the most commonly diagnosed tumor and a cause of death in older men. Abiraterone, an orally administered irreversible CYP17 inhibitor, is employed to treat prostate cancer. However, abiraterone has several clinical limitations, such as poor water solubility, low dissolution rate, low bioavailability, and toxic side effects in the liver and kidney. Therefore, there is a need to identify high-efficiency and low-toxicity water-soluble abiraterone derivatives. In this work, we aimed to design and synthesize a series of abiraterone derivatives by methoxypoly(ethylene glycol) (mPEG) modification. Their antitumor activities and toxicology were analyzed in vitro and in vivo. The most potent compound, 2e, retained the principle of action on the CYP17 enzyme target and significantly improved the abiraterone water solubility, cell permeability, and blood safety. No significant abnormalities were observed in toxicology. mPEG-modification significantly improved abiraterone's antitumor activity and efficiency while reducing the associated toxic effects. The finding will provide a theoretical basis for future clinical application of mPEG-modified abiraterone.

Digestion is a critical element for absorption of cinnarizine from supersaturated lipid-based type I formulations

Enabling formulations, such as lipid-based formulations (LBFs), are means to deliver challenging-to-formulate, poorly soluble drugs. LBFs may be composed of lipids, surfactants and/or cosolvents and can be classified depending on the proportions of the components and the hydrophilicity of the surfactant according to the Lipid Formulations Classification System, ranging from type I (very lipophilic) to type IV (hydrophilic). In cases where drug solubility in LBFs does not suffice, e.g. for preclinical toxicity studies, supersaturated LBFs can be used in order to increase the drug load. However, the effect of digestion on drug absorption from supersaturated type I formulations (consisting exclusively of lipids) still remains relatively unexplored and unclear. In the present study, the impact of lipid digestion on absorption of cinnarizine-loaded supersaturated lipid-based formulations of type I was investigated in rats by pre-dosing of the lipase inhibitor orlistat. The lipid chain length and the drug dose were varied by testing medium-chain triglycerides (MCT) and long-chain triglycerides (LCT), both supersaturated and non-supersaturated. Due to the physical instability of supersaturated formulations of cinnarizine, i.e. a potential of precipitation of cinnarizine, the impact of the addition of the amphiphilic polymer Soluplus®, as a potential precipitation inhibitor, was also investigated. The supersaturated systems resulted in a 2.3 - 3.3-fold higher Area Under the Curve (AUC0-24 h, not dose-normalized) and 1.4 - 2.2-fold higher maximum plasma concentration (Cmax, not dose-normalized) than non-supersaturated formulations (statistically significant with p = 0.05), whereas the addition of Soluplus® did not reveal any benefit. Results indicated that lipase inhibition affected the in vivo performance of LBFs: Co-administration of the lipase inhibitor significantly reduced Cmax and AUC0-24 h (both to 33-39 %, not dose-normalized) for the LCT formulations and, though not significant, a similar trend was observed for the AUC0-24 h of the MCT formulations (to 53-87 %), suggesting a higher dependency on lipolysis for LCT. Also, tmax tended to decrease to 20-60 % when compared to the animals not dosed with orlistat but lacking statistical significance. Without lipase inhibition, the LCT in general lead to better absorption of cinnarizine as compared to MCT, with 1.2-1.7-fold higher AUC0-24 h and 1.4-1.8-fold higher Cmax, but without showing statistical significance. Overall, the study revealed that lipolysis plays a major role in drug absorption from supersaturated lipid-based formulations type I.

Bentonite as a water-insoluble amorphous solid dispersion matrix for enhancing oral bioavailability of poorly water-soluble drugs

Bentonite (BT), an orally administrable natural clay, is widely used for medical and pharmaceutical purposes due to its unique properties, including swelling, adsorption and ion-exchange. However, its application as a matrix of amorphous solid dispersion (ASD) formulations is rarely reported, despite the fact that drugs can adsorb to BT in an amorphous state. The objective of this study was to explore the feasibility of BT as a water-insoluble ASD matrix for enhancing the oral bioavailability of poorly water-soluble drugs, including sorafenib (SF). We prepared a novel BT-based ASD of an SF-BT composite (SFBTC) by adsorbing SF onto BT under acidic conditions using the ionic interaction between cationic SF and negatively charged BT. Scanning electron microscopy (SEM), powder X-ray diffractometry (pXRD), and differential scanning calorimetry (DSC) analyses revealed that SF adsorbed to BT in an amorphous state at SF:BT ratios from 1:3 to 1:10. In pharmacokinetic studies in rats, SFBTC (1:3) significantly improved the oral bioavailability of SF, and the AUClast of SFBTC (1:3) was 3.3-fold higher than that of NEXAVAR®, a commercial product of SF. An in vitro release study under sink conditions revealed that SFBTC (1:3) completely released SF in a pH-dependent manner, while a nonsink condition study indicated the generation of supersaturation under intestinal pH conditions. A kinetic solubility study showed that the release of SFBTC (1:3) followed the diffusion-controlled mechanism, which is a typical characteristic of water-insoluble matrix-based ASDs. The pharmacokinetic studies of drug-BT composites of various drugs belonging to BCS class II indicated that the pKa value of the adsorbed drugs is one of the most important factors determining their dissolution and oral bioavailability. These results suggest that BT could be a promising water-insoluble ASD matrix for improving the oral bioavailability of poorly water-soluble drugs, including SF.

Battle of the milky way: Lymphatic targeted drug delivery for pathogen eradication

Many viruses, bacteria, and parasites rely on the lymphatic system for survival, replication, and dissemination. While conventional anti-infectives can combat infection-causing agents in the bloodstream, they do not reach the lymphatic system to eradicate the pathogens harboured there. This can result in ineffective drug exposure and reduce treatment effectiveness. By developing effective lymphatic delivery strategies for antiviral, antibacterial, and antiparasitic drugs, their systemic pharmacokinetics may be improved, as would their ability to reach their target pathogens within the lymphatics, thereby improving clinical outcomes in a variety of acute and chronic infections with lymphatic involvement (e.g., acquired immunodeficiency syndrome, tuberculosis, and filariasis). Here, we discuss approaches to targeting anti-infective drugs to the intestinal and dermal lymphatics, aiming to eliminate pathogen reservoirs and interfere with their survival and reproduction inside the lymphatic system. These include optimized lipophilic prodrugs and drug delivery systems that promote lymphatic transport after oral and dermal drug intake. For intestinal lymphatic delivery via the chylomicron pathway, molecules should have logP values >5 and long-chain triglyceride solubilities >50 mg/g, and for dermal lymphatic delivery via interstitial lymphatic drainage, nanoparticle formulations with particle size between 10 and 100 nm are generally preferred. Insight from this review may promote new and improved therapeutic solutions for pathogen eradication and combating infective diseases, as lymphatic system involvement in pathogen dissemination and drug resistance has been neglected compared to other pathways leading to treatment failure.

Lipid based formulations as supersaturating oral delivery systems: From current to future industrial applications

Lipid-based formulations, in particular supersaturated lipid-based formulations, are important delivery approaches when formulating challenging compounds, as especially low water-soluble compounds profit from delivery in a pre-dissolved state. In this article, the classification of lipid-based formulation is described, followed by a detailed discussion of different supersaturated lipid-based formulations and the recent advances reported in the literature. The supersaturated lipid-based formulations discussed include both the in situ forming supersaturated systems as well as the thermally induced supersaturated lipid-based formulations. The in situ forming drug supersaturation by lipid-based formulations has been widely employed and numerous clinically available products are on the market. There are some scientific gaps in the field, but in general there is a good understanding of the mechanisms driving the success of these systems. For thermally induced supersaturation, the technology is not yet fully understood and developed, hence more research is required in this field to explore the formulations beyond preclinical studies and initial clinical trials.

The Influence of Blonanserin Supersaturation in Liquid and Silica Stabilised Self-Nanoemulsifying Drug Delivery Systems on In Vitro Solubilisation

Reformulating poorly water-soluble drugs as supersaturated lipid-based formulations achieves higher drug loading and potentially improves solubilisation and bioavailability. However, for the weak base blonanserin, silica solidified supersaturated lipid-based formulations have demonstrated reduced in vitro solubilisation compared to their liquid-state counterparts. Therefore, this study aimed to understand the influence of supersaturated drug load on blonanserin solubilisation from liquid and silica solidified supersaturated self-nanoemulsifying drug delivery systems (super-SNEDDS) during in vitro lipolysis. Stable liquid super-SNEDDS with varying drug loads (90-300% of the equilibrium solubility) were solidified by imbibition into porous silica microparticles (1:1 lipid: silica ratio). In vitro lipolysis revealed greater blonanserin solubilisation from liquid super-SNEDDS compared to solid at equivalent drug saturation levels, owing to strong silica-BLON/lipid interactions, evidenced by a significant decrease in blonanserin solubilisation upon addition of silica to a digesting liquid super-SNEDDS. An increase in solid super-SNEDDS drug loading led to increased solubilisation, owing to the increased drug:silica and drug:lipid ratios. Solidifying SNEDDS with silica enables the fabrication of powdered formulations with higher blonanserin loading and greater stability than liquid super-SNEDDS, however at the expense of drug solubilisation. These competing parameters need careful consideration in designing optimal super-SNEDDS for pre-clinical and clinical application.

Systematic Development of Solid Lipid Nanoparticles of Abiraterone Acetate with Improved Oral Bioavailability and Anticancer Activity for Prostate Carcinoma Treatment

In the present work, an attempt was undertaken to improve the oral bioavailability and anticancer activity of abiraterone acetate. Solid lipid nanoparticles (SLNs) were developed using the quality by design (QbD) principles and evaluated through in vitro, ex vivo, and in vivo studies. Solid lipid suitability was evaluated by equilibrium solubility study, while surfactant and cosurfactant were screened based on the ability to form microemulsion with the selected lipid. SLNs were prepared by emulsion/solvent evaporation method using glyceryl monostearate, Tween 80, and Poloxamer 407 as the solid lipid, surfactant, and cosurfactant, respectively. Box-Behnken design was applied for optimization of material attributes and evaluating their impact on particle size, polydispersity index, zeta potential, and entrapment efficiency of the SLNs. In vitro drug release study was evaluated in simulated gastric and intestinal fluids. Cell culture studies on PC-3 cells were performed to evaluate the cytotoxicity of the drug-loaded SLNs in comparison to the free drug suspension. Qualitative uptake was evaluated for Rhodamine B-loaded SLNs and compared with free dye solution. Ex vivo permeability was evaluated on Wistar rat intestine and in vivo pharmacokinetic evaluation on Wistar rats for SLNs and free drug suspension. Concisely, the SLNs showed potential for significant improvement in the biopharmaceutical performance of the selected drug candidate over the existing formulations of abiraterone acetate.

Augmented experimental design for bioavailability enhancement: a robust formulation of abiraterone acetate

Abiraterone acetate (ABRTA) is clinically beneficial in management of metastatic castration-resistant prostate cancer (PC-3). With highlighted low solubility and permeability, orally hampered treatment of ABRTA necessitate high dose to achieve therapeutic efficacy. To triumph these challenges, we aimed to develop intestinal lymphatic transport facilitating lipid-based delivery to enhance bioavailability. ABRTA-containing self-nano emulsified drug delivery (ABRTA-SNEDDS) was statistically optimized by D-optimal design using design expert. Optimized formulation was characterized for particle size, thermodynamic stability, in vitro release, in vivo bioavailability, intestinal lymphatic transport, in vitro cytotoxic effect, anti-metastatic activity, and apoptosis study. Moreover, hemolysis and histopathology studies have been performed to assess pre-clinical safety. Nano-sized particles and successful saturated drug loading were obtained for optimized formulation. In vitro release upto 98.61 ± 3.20% reveal effective release of formulation at intestinal pH 6.8. ABRTA-SNEDDS formulation shows enhanced in vivo exposure of Abiraterone (2.5-fold) than ABRTA suspension in Sprague-Dawley rats. In vitro efficacy in PC-3 cell line indicates 3.69-fold higher therapeutic potential of nano drug delivery system. Hemolysis and histopathology study indicates no significant toxicities to red blood cells and tissues, respectively. Apparently, an opportunistic strategy to increasing bioavailability of ABRTA via intestinal lymphatic transport will create a viable platform in rapidly evolving chemotherapy. Enhanced translational utility of delivery was also supported through in vitro therapeutic efficacy and safety assessments. HighlightsAbiraterone acetate is a prostate cancer drug, impeded with low bioavailability.ABRTA loaded in self nano emulsifying drug delivery enhanced its bioavailability.Intestinal lymphatic transport played role in enhanced bioavailability of ABRTA.ABRTA-SNEDDS enhanced in vitro cytotoxic activity of ABRTA.ABRTA-SNEDDS found safe in preclinical safety evaluations.

Fundamental Aspects of Lipid-Based Excipients in Lipid-Based Product Development

Poor aqueous solubility of drugs is still a foremost challenge in pharmaceutical product development. The use of lipids in designing formulations provides an opportunity to enhance the aqueous solubility and consequently bioavailability of drugs. Pre-dissolution of drugs in lipids, surfactants, or mixtures of lipid excipients and surfactants eliminate the dissolution/dissolving step, which is likely to be the rate-limiting factor for oral absorption of poorly water-soluble drugs. In this review, we exhaustively summarize the lipids excipients in relation to their classification, absorption mechanisms, and lipid-based product development. Methodologies utilized for the preparation of solid and semi-solid lipid formulations, applications, phase behaviour, and regulatory perspective of lipid excipients are discussed.

Role of Silica Intrawall Microporosity on Abiraterone Acetate Solubilization and In Vivo Oral Absorption

SBA-15 mesoporous silica (MPS) has been widely used in oral drug delivery; however, it has not been utilized for solidifying lipid-based formulations, and the impact of their characteristic intrawall microporosity remains largely unexplored. Here, we derive the impact of the MPS microporosity on the in vitro solubilization and in vivo oral pharmacokinetics of the prostate cancer drug abiraterone acetate (AbA) when coencapsulated along with medium chain lipids into the pores. AbA in lipid (at 80% equilibrium solubility) was imbibed within a range of MPS particles (with comparable morphology and mesoporous structure but contrasting microporosity ranging from 0-247 m²/g), and their solid-state properties were characterized. Drug solubilization studies during in vitro lipolysis revealed that microporosity was the key factor in facilitating AbA solubilization by increasing the surface area available for drug-lipid diffusion. Interestingly, microporosity hindered hydrolysis of AbA to its active metabolite, abiraterone (Ab), under simulated intestinal conditions. This unique relationship between microporosity and AbA/Ab aqueous solubilization behavior was hypothesized to have significant implications on the subsequent bioavailability of the active metabolite. In vivo oral pharmacokinetics studies in male Sprague-Dawley rats revealed that MPS with moderate microporosity attained the highest relative bioavailability, while poor in vitro-in vivo correlations (IVIVC) existed between in vitro drug solubilization during lipolysis and in vivo AUC. Despite this, a reasonable IVIVC was established between the in vitro solubilization and in vivo C_max, providing evidence for an association between silica microporosity and oral drug absorption.

Improving the dissolution behaviors and bioavailability of abiraterone acetate via multicomponent crystal forms

Abiraterone acetate (ABA), the first-line drug for the treatment of metastatic castration resistant prostate cancer (mCRPC), is administered at a high daily dosage of 1000 mg due to its poor solubility, and its fasted absolute oral bioavailability is estimated to be less than 10%. In this work we have focused on developing multicomponent forms with improved dissolution behaviors and bioavailability. Two salts of ABA with malonic acid (ABA-MA) and saccharin (ABA-SAC), and five cocrystals with trans-aconitic acid (ABA-TAA), 1-hydroxy-2-naphthoic acid (ABA-1HNA), pyrocatechol (ABA-PCA), resorcinol (ABA-RES) and hydroquinone (ABA-HDE) were successfully obtained. Their crystal structures were elucidated by single crystal X-ray diffraction, and these multicomponent forms were fully characterized by powder X-ray diffraction, thermal analysis and Fourier Transform Infrared spectra. Among them, ABA-TAA cocrystal shows substantial enhancements both in the solubility and intrinsic dissolution rates in different buffer solutions. In the meantime, we unexpectedly found the gelation of ABA-MA salt and ABA-SAC salt in pH 2.0 buffer solution. The gel-like materials generated on the surface of drug will suppress the release of ABA. Moreover, in vivo pharmacokinetic study on beagle dogs was conducted for ABA-TAA cocrystal preparation and ABA commercial product, and ABA-TAA cocrystal preparation shows enhanced absorption. These advantages in dissolution behaviors and bioavailability demonstrate the potential of ABA-TAA cocrystal to be a better candidate for the treatment of mCRPC compared with ABA.

Harnessing the potential of nanostructured formulations to mimic the food effect of lurasidone

Lurasidone is an important antipsychotic drug indicated for the treatment of schizophrenia and bipolar disorder, with an oral bioavailability of 9-19% owing to its poor aqueous solubility. Additionally, lurasidone exhibits a 2-fold positive food effect, such that patients must administer their medication with a meal, leading to significant non-compliance. The aim of this research was to evaluate the in vitro and in vivo performance of lurasidone when engineered as nanostructured systems. Specifically, a nanosuspension, nano-emulsion and silica-lipid hybrid (SLH) microparticles were formulated and the influence of composition and nanostructure on the mechanism of solubilisation was compared. Formulations were shown to enhance fasted state solubilisation levels in vitro by up to 5.9-fold, compared to pure drug. Fed- and fasted-state solubilisation profiles revealed that in contrast to the nanosuspension and nano-emulsion, lurasidone SLH mitigated the positive pharmaceutical effect of lurasidone. In vivo pharmacokinetic evaluations revealed that the nanosuspension, nano-emulsion and SLH enhanced the bioavailability of lurasidone by 3-fold, 2.4-fold and 8.8-fold, respectively, compared to pure drug after oral administration. For lurasidone, the combination of lipid-based nanostructure and porous silica nanostructure (SLH) led to optimal fasted state bioavailability which can ultimately result in enhanced treatment efficacy, easier dosing regimens and improved patient outcomes.

The Influence of Solidification on the in vitro Solubilisation of Blonanserin Loaded Supersaturated Lipid-Based Oral Formulations

Supersaturated silica-lipid hybrids have previously demonstrated improved in vitro solubilisation and in vivo oral bioavailability of poorly water-soluble drugs, however were only fabricated using a single lipid (LFCS type I formulations) and were not compared to their liquid precursors. This study investigated the influence of lipid formulation classification (type I vs. type II vs. type IIIA/SNEDDS) and physical state (liquid LBF vs. solidified with silica) on the in vitro solubilisation of the poorly soluble, weak base, anti-psychotic drug, blonanserin (BLON), from a supersaturated lipid-based formulation (LBF). Stable liquid supersaturated LBF were fabricated using BLON (loaded at 150% of its equilibrium solubility), and solidified through encapsulation within porous silica microparticles at a 1:1 ratio. Their physicochemical properties and in vitro solubilisation during lipolysis were compared. Supersaturated BLON was encapsulated in the non-crystalline form. All supersaturated LBF improved the solubilisation of pure BLON during lipolysis regardless of their lipid formulation type or their physical state (1.7- to 13.4-fold). SNEDDS achieved greater solubilisation than the type II formulations (1.4- to 1.7-fold). Furthermore, the liquid precursors achieved greater solubilisation than the silica solidified formulations (4.5- to 5.7-fold). Additionally, in an attempt to increase BLON solubilisation, a spray-dried SNEDDS and dual-loaded solidified super-SNEDDS solidified with silica pre-loaded with BLON was developed, however did not significantly improve solubilisation. Liquid SNEDDS were identified as the optimal oral supersaturated LBF strategy for BLON based on in vitro lipolysis studies. Solidification of LBF using silica is a viable strategy for improving stability, however for drugs such as BLON, solidification may impede in vitro release and solubilisation.

Porous Nanostructure, Lipid Composition, and Degree of Drug Supersaturation Modulate In Vitro Fenofibrate Solubilization in Silica-Lipid Hybrids

The unique nanostructured matrix obtained by silica-lipid hybrids (SLHs) is well known to improve the dissolution, absorption, and bioavailability of poorly water-soluble drugs (PWSDs). The aim of this study was to investigate the impact of: (i) drug load: 3–22.7% w/w, (ii) lipid type: medium-chain triglyceride (Captex 300) and mono and diester of caprylic acid (Capmul PG8), and (iii) silica nanostructure: spray dried fumed silica (FS) and mesoporous silica (MPS), on the in vitro dissolution, solubilization, and solid-state stability of the model drug fenofibrate (FEN). Greater FEN crystallinity was detected at higher drug loads and within the MPS formulations. Furthermore, an increased rate and extent of dissolution was achieved by FS formulations when compared to crystalline FEN (5–10-fold), a commercial product; APO-fenofibrate (2.4–4-fold) and corresponding MPS formulations (2–4-fold). Precipitation of FEN during in vitro lipolysis restricted data interpretation, however a synergistic effect between MPS and Captex 300 in enhancing FEN aqueous solubilization was attained. It was concluded that a balance between in vitro performance and drug loading is key, and the optimum drug load was determined to be between 7–16% w/w, which corresponds to (200–400% equilibrium solubility in lipid S_eq). This study provides valuable insight into the impact of key characteristics of SLHs, in constructing optimized solid-state lipid-based formulations for the oral delivery of PWSDs.